|
|
|
VACCARI SPA
|
|
 |
screw-presses
screw-presses | | |
|
|
|
|
VISCOM AG
|
|
 |
Desktop-AOI S2088
The Ideal Entry into Automatic Optical Inspection
Application Area
The best method for assuring production quality is automatic optical inspection. Our desktop system offers the best entry to utilizing AOI in your process. This system is the perfect solution for low volume, high-mix production, prototype assembly and is ideally suited to support the start-up of new assemblies destined for high volume production. The Desktop-AOI is also optimal for customers with floor space constraints and where a manageable cost investment is required. The system delivers quick setup and robust process repeatability, which are important prerequisites, especially when production occurs in small lots and short cycle times.
Highlights
Unsurpassed inspection depth - down to ´0201, 0,4 mm raster
Compact system with integrated PC
Precise linear drives
High-resolution color camera
Quick and easy programming generation with the ViscomVisionPilot VVP and the user interface EasyPro3D
High performance OCR-software
Ergonomic product loading
Worldwide, competent service:
On-site, by hotline, or remote diagnosis
Internet support
| | |
 |
MX100IR
Automatic, high accuracy desktop wafer inspection | | |
 |
QFP solder defect
Inspection of Solder Joints on Electric Assemblies
The inspection of faulty solder joints is the chief assignment area for Viscom inspection systems. Defects that frequently arise during production are, for example:
open solder joints
solder bridges
components with too little or too much solder
lifted leads
missing or displaced components. | | |
 |
S3088-II
Fast and reliable -
Automatic optical inspection of soldered printed circuit boards
Application Area
High-mix product changes, minuscule components and the need for fast and reliable inspection are among the challenges facing electronics production today.
With EasyPro3D, the S3088-II enables fast and easy creation of new inspection programs. Viscom proprietary 8M camera technology not only inspects 01005 components with complete reliability, but also allows the operator to select between two resolutions to suit the inspection task. With this option, the inspection system meets the most extreme cycle time requirements after soldering as well as after paste print or component placement.
Highlights
Highest inspection depth with 8M cameras
Selective high resolution with OnDemandHR-Operation
Color evaluation
Fast program creation with EasyPro3D
Algorithm-based inspection
Easy program transfer
Additional options
Repair and post-classification, off-line programming and VPC statistical process control
| | |
|
|
|
|
VISION ENGINEERING LTD
|
|
 |
pioneering optical and video non-contact measuring microscopes
Vision Engineering's Kestrel 200 optical measuring microscope provides fast and accurate 2-axis measurement of precision component parts.
From simple manual, single-feature operation to more complex component part measurement, Kestrel 200 combines high resolution, high contrast optical images with an intuitive microprocessor to deliver accuracy and simplicity for a wide range of measuring applications. The superior optical image of Kestrel even allows difficult-to-view features to be measured on low contrast components, such as black or transparent plastics. | | |
 |
Stereo Microscopes
Systems include the revolutionary Mantis stereo viewer and Lynx stereo microscope, both with 'Eyepieceless' technology for fatigue-free viewing for improved quality & productivity ... more
| | |
|
|
|
|
VMI-AZ EXTRUSION GmbH
|
|
 |
APEX - 70 Extruders
The APEX - 70 Extruders are designed for the requirements of the VMI APEX-Line. Main features of the system are:
Unique screw diameter of 70mm precisely matches the output of the VMI APEX - Line
Die exchange within 15 seconds!
Tailormade software
Available as PIN-Type or Transfermixextruder | | |
 |
Combines a PIN-Type
Combines a PIN-Type or Transfermixextruder with a robust gear pump
for rubber Extrusion processes such as:
Hot and cold feed strainer applications
Tire tread production
Wire coating for production of breakers
Fabric coating for cap - strip and body ply in VMI Baldwin-Lines
| | |
 |
Rubber Extruders
Rubber Extruders | | |
 |
Transfermix extruders
Transfermix extruders are designed for extrusion of rubber
compounds that require only low energy input such as
synthetic rubber or cushion gum.
Due to the unique transfermix section the temperature - output
behaviour is improved as compared to conventional extrusion systems.
Transfermix extruders are available for following pplications:
Tread production
Cushion gum extrusion in retread systems
Apex extrusion in VMI Apex - lines
As co-extruder in multiplex extrusion systems | | |
|
|
|
|
VMS-Maschinenbau GmbH
|
|
 |
Components and Stations for dairy industries
We offer complete stations for our customers in the food industry. In most cases these stations are retrofitted to existing production machines in order to improve performance.
Mo matter what problem you have to deal with, difficult to sort cups, low viscous liquids, foaming products, or the sterilization of containers and lids, we will develop the optimal custom solution for you.
These stations can be retrofitted not only on our machines, but also to other manufacturers machines.
| | |
 |
Food Industry
Our customers in the industrial food industry require special emphasis on optimal hygiene and gentle product handling. The hygiene standards, the sterilizing of containers and the sterilizing of entire filling machines are critical parameters in the food industry.
Our strength is the optimized layout of aseptic filling machines and processing lines for the food industry.
Consistent quality control ensures that our customers receive equipment of exceptional quality, which exceeds food industry requirements.
We know these requirements and therefore are able to take them into consideration. Each and every machine which leaves our plant as been individually planed and custom build.
Challenge us, we will not disappoint you | | |
 |
Vakucheck
Vakucheck is used for the integrity testing of closed containers (cups or bags), and marks and rejects failed product.
VMS-VAKUCHECK can be adapted to any machine output.
Advantages
• Adaptable to any machine type and
manufacturer
• Installation of integrity check in final
packaging phase (before palleting)
• Suitable for all cup sizes
• Suitable for unusual packaging
containers
• Gentle product handling, without
any damage to container
• Adjustable pressure, smallest
leaks can be detected
Types
• VMS-VAKUCHECK is fully customizable acc. to customer preferences
• Different models are available, either
floor mounted model, or suspended
from sealing, or installed into wall
• VMS-VAKUCHECK may be integrated into discharge belt or mounted in
by-pass position (over or next to belt)
Options
• Marking station type MS
• Carton rejecter type KS, incl. belt
| | |
 |
VMS Filling machine RX 1000
The multi functional filling machine
VMS-RX 1000 is designed for manual, stand-alone operation. The compact and robust design allows for years of trouble free operation. This universal and flexible filler can be used in various industries. The high quality stainless steel enclosure is easy to clean. A generously designed work area allows for several containers to be handled simultaneously.
Superior Technology
The design of the mechanical and electrical parts are state of the art. The following features demonstrate the technological advantages:
• The vertical filler is easy to clean and allows for a complete depletion.
• A short product line between filler and nozzle reduces product loss at product change over.
• Optional processing of abrasive products.
• The fixed nozzle allows for a hose free connection between filler and nozzle. The product lines can be entirely drained.
• Bottom up filling is accomplished by lifting the containers with a servo drive. This ensures precise control and the foaming of products can be minimized.
• A pneumatic valve closes the nozzle after filling in order to prevent product drip in idle mode.
• The piston is also controlled by a servo drive. This allows for optimal adjustment of the dispensing parameters to the specific product to be filled.
• A central greasing system ensures a trouble-free operation.
| | |
|
|
|
|
VOC Technology
|
|
 |
Biofilter
An environmentally friendly and cost effective purification method for low concentrations of biodegradable pollutants.
Typical removal efficiency is > 80% | | |
 |
Swingtherm
A highly efficient air purification system for VOC emissions that require high levels of purification and low energy consumption. Normally a removal efficiency of 96-98% can be achieved. | | |
 |
VOC Concentrator
A system that purifies extremely low VOC concentrations in large air flows at
a reasonable operating cost. | | |
|
|
|
|
Vogelbusch GmbH
|
|
 |
alcohol technology.
alcohol technology. | | |
|
|
|
|
Vogt GmbH & Co.KG
|
|
 |
Der Werkzeugbau - unsere Kernkompetenz
Die Konstruktion und die Herstellung der Prototypen- und Serien-werkzeuge beschreibt unsere Kernkompetenz. Zur Absicherung der hohen qualitativen Anforderungen an unsere Produkte werden ausschließlich ausgebildete Werkzeugmechaniker eingesetzt.
Die Konstruktion und Herstellung der Werkzeuge erfolgt unternehmensintern.
| | |
|
|
|
|
VOLLMER WERKE Maschinenfabrik GmbH
|
|
 |
CA 100
Profile sharpening machine with cam control system, available in
dry and wet grinding versions. Extremely robust and simple to operate. Compact design.
Blade width: 120 to 360 mm
Blade length: from 5,5 m | | |
 |
CanaE
Sharpening machine for automatic machining of band, gang and circular saw blades with different tooth geometries.
Band saw blade width: 60 to 260 mm
Gang saw blade width: to 200 mm
Circular saw blade outer diameter: 120 to 1250 mm | | |
 |
Liliput
Sharpening machine for automatic machining of narrow band and circular saw blades. Compact, space-saving machine.
Band saw blade width: 5 to 70 mm
Circular saw blade outer diameter: 60 to 650 mm
| | |
 |
Profile grinding
Exact profile grinding is essential for long-lasting band saw blades and good cutting performance. | | |
 |
tipping machine
tipping machine | | |
|
|
|
|
Volvo Aero Corporation
|
|
 |
turbines
industrial and marine gas turbines | | |
|
|
|
|
Voortman Automatisering
|
|
 |
CNC drilling system
V600 Drilling System
The V600 drilling system is suitable for structural steel fabricators with a limited floor space. The operator loads the drilling table with several profiles behind each other, after which the horizontal drilling unit provides one or more profiles with the programmed hole pattern. By drilling holes through both flanges/sides or by rotating a profile it is possible to drill the material on all sides. Besides drilling the machine can also carry out thread tapping. A vertical hydraulic clamp, which clamps the product to the table during drilling, is fixed at the front of the drilling cabin. For tool changing, the drilling unit is provided with an automatic tool changers. After replacing a drill the length of the new tool is automatically measured and before starting the drilling process the web and flange height will be measured automatically. The holes in the flanges can be positioned with regard to the centre of the measured flange height or the actual web height | | |
 |
Drilling center
For the V603M, V613M and V630M drilling system the positioning of a profile is carried out by a machine integrated feeder rolls positioning system.
Both, the V603M as well as the V630M, are executed with one vertical and two horizontal servo-controlled drilling units. Therefore profiles can be drilled simultaneously in both flanges and in the web. With the rotating drilling unit of the V613M profiles can be drilled vertically as well as horizontally. This system can operate independently for long periods due to the automatic tool changers.
Combine with other systems
The drilling systems can be combined with a horizontal bandsawing machine, a hydraulic numbering machine and/or a beam coping system. For further automation of the pre-fabrication a Voortman shot blaster can be added to the production line. Therefore one operator can centrally control all these machines for drilling, sawing and shot blasting.
Software
Each drilling system is provided with a computer control, which can be integrated in the company’s network, so that DSTV- and DSTV+-data can be directly downloaded, from system files within the company database, to the drilling system. Also software to compose production batches will be installed. | | |
 |
Horizontal band saw
Horizontal band saw
< 1 550 mm
Voortman has developed five models of band sawing machines especially for sawing structural steel. Four sawing machines are developed for mitre cutting. The fifth is designed for straight cutting of profiles. The sawing machines are equipped with a control system for the selection of the mitre angle and the automatic sawing cycle.
The band speed is frequency controlled and the feed rate is automatically controlled to suit the profile type and size.
The sawing machines can be combined with a length measuring system with stop truck. The sawing machine can also be combined with a drilling system for sawing and drilling in one continuous process.
These sawing machines are available with different cutting capacities. The VB600 for sawing max. 450 x 620 mm, the VB750 for 450 x 750 mm, the VB1050 for 500 x 1.130 mm and the VB1250 for 600 x 1 250 mm.
| | |
 |
Punching-shearing machine
The Voortman punching and shearing lines are mainly used by structural steel fabricators producing plates, fittings and angle steel parts.
The punching and shearing lines are equipped with as standard a punching unit with four punches and a flat steel shear with +/- 45º mitre cutting.
As additional extras the production line can be provided with an angle steel shear, a horizontal punching machine, a numbering unit and a drilling unit coupled with many other optional extras.
For the automatic processing of angles used in the manufacture of electrical transmission towers, diagonal trusses and connecting angle braces Voortman developed the angle line. The basic machine consists of two hydraulic punching machines and a hydraulic angle steel shear. Several options, such as a numbering unit can be added to the system. | | |
|
|
|
|
Voortman Machines B.V.
|
|
 |
Bending machines Profile bending MD
Group Bending machines
Category Profile bending
St. No. 6727
Make MD
Type UP 100 Plus
| | |
 |
Boringmills Table type Tos - Varnsdorf
Group Boringmills
Category Table type
St. No. 6816
Make Tos - Varnsdorf
Type W 9 - A
| | |
 |
Circular cutting machines
Group Sheet metalworking
Category Circular cutting machines
St. No. 8883
Make Stahlschmidt
Type RS 16/3750
| | |
 |
Lathes CNC lathes Daewoo
Group Lathes
Category CNC lathes
St. No. 6733
Make Daewoo
Type Puma 10
| | |
|
|
|
|
Vopelius Chemie AG
|
|
 |
VOPCROM 750
Under the brand name VOPCROM® 750, Vopelius Chemie AG offers a complete system for the supply of chromic acid in liquid form that allows clients, whether large or small, to use chromic acid safely, efficiently and without any dust load. | | |
 |
Vopcrom DSA
A hard chrome procedure of the third generation.
...
High current efficiency (18-25%)...
Low anode corrosion ...
No etching on steel and steel alloys.
...
Bright deposits with good leveling.
...
High deposit speed compared with standard process
Good corrosion protection and wear resistance of the layer.
Good micro cracking qualities (approx. 300 - 800 cracks/cm).
Bright, hard chrome layers (approx. 800 – 1100 HV)....
The hard chrome process for the future
| | |
|
|
|
|
Vötsch Industrietechnik GmbH Environmental simulation
|
|
 |
Humidity and temperature test chamber
Temperature Test Chambers VT³
und Climatic Test Chambers VC³
If you are looking for top quality and unmatched performance, then Vötsch has just what you need | | |
 |
Infrared oven
Infrared oven VTIR 65/40-200°C
Industry:
Electronics industry
Application:
Burn in of coatings | | |
 |
Temperature test chamber
Temperature Test Chambers 110/200 l
for the laboratory
VT 4011, VT 7011, VT 4021, VT 7021
| | |
|
|
|
|
VTC Elastoteknik AB
|
|
 |
Appliances and Domestic
Application Areas
Domestic articles, household goods, castor wheels, toys, bottle stops, vacuum cleaner seals, horse shoes, power tools, hand tools, sanitary seals, door stops and wedges, beer barrel bungs, toothbrushes, beer crate handles, and outdoor all-year-round applications | | |
 |
Automotive
Application Areas
Interior: stowage consoles, cup-holders, floor-well mats, grips/handles, buttons, seat adjusters, grommets, profiles, pedal covers, facia mats, ignition lock surrounds and soft touch arm rests.
Exterior: mud flaps, roof rack feet, wheel arch liners, tread mats, side steps, bumpers, door seals, under floor air deflectors and stone chip protectors.
Under the hood: air ducts, radiator air ducts, radiator grill edges and shield seals. | | |
 |
Dryflex - One material, infinite possibilities
Sophisticated, technical TPS compounds engineered to meet the most demanding challenges in a vast range of industrial applications. From radiator ducts to arm rests, wheels to washing machines seals, tool handles to toothbrushes.
Dryflex is versatile
Easily processed by a number of different methods, range of hardness from 0 Shore A to 65 Shore D, colourable or transparent making it the material of choice for a diverse range of applications.
Dryflex is high performance
Wide service temperature range, improved chemical resistance.
Dryflex is innovative
We are continuously developing new Dryflex compounds; adapting to changing market needs and we will continue to do so thanks to the development potential of its properties.
Dryflex is cost-effective
Fast processing cycle-times, fully recyclable and reprocessable.
Dryflex offers technical advantages
Dryflex compounds can be flame retardant, they do not conduct electricity, it can be formulated to swell in water. Dryflex compounds provide an excellent bond with PA, ABS, PC and PC/ABS for use in overmoulding applications.
Dryflex TPS materials in 30-90 Shore A
The VTC TPE Group has developed a range of materials - the S-series - which can be used advantageously in most applications. These materials are easy to work and are ideal for both injection moulding and extrusion. The links below display a selection of available S grades, we work with you to ensure we deliver the very best material to meet every application need and where an existing grade will not match those requirements we custom compound a material that will | | |
 |
Unfilled Grades - 500S
The 500 series is an excellent option when good scratch resistance is asked for and when there are high surface finish requirements such as elongation, compression set, tensile and tear strength. The low density gives lower weight compared to the 600 and 660 series. Material in the 500 series is available in hardnesses from 7 Shore A to 55 Shore D.
Service temperature range
UV and ozon resistance
Weatherability
Food contact¹
Adhesion to PP
Specific Gravity
Shrinkage
Processing temp. Extrusion
Processing temp. Injection mould -50 - +125°C
Excellent
Excellent
x
Excellent
0,89 g/cm³
0,8-2,0%
150 - 210°C
180 - 210°C
¹From 30 Shore A to 90 Shore A there are, in 5 Shore steps, types in translucent and black, that are in compliance with food regulations
| | |
|
|
|
|
VTD VAKUUMTECHNIK DRESDEN GmbH
|
|
 |
Plastic Industry technology
Functional hard material coating | | |
|
|
|
|
VIS International GmbH
|
|
 |
construction
The realisation of energy-, water-, and environmental projects and the construction of appropriate plants requires comprehensive experiences, a high degree of technological qualification and open-mindedness towards new, innovative solutions. Whether we speak about modifications, enlargements or the construction of already existing plants or the new building of complete plants or plant components: as a responsible building site supervision, VIS International represents worldwide the interests of their clients and coordinates the entire technical executions - from supervising the temporal and technical course of the project, to the coordination of the required resources, up to checking whether the quality and the execution on site concur with the plans and authorizations on hand.
With our many years of experience in assembly and bringing plant technologies into operation, we offer a competence in building site supervision, that synchronises all the work routine perfectly, that optimises the time required for construction and which therefore leads to synergised quality results, as well as an excellent cost-/ benefit relation. If wanted, it can even lead to a simple turnkey handover of our project.
| | |
 |
Consulting
Consulting
We from VIS International identify and develop projects worldwide, around the subject of water and sewage - economically, future-oriented and adapted to individual structures. We draw up project proposals, work out necessary preliminary investigations and compose feasibility studies with clear statements, that build an optimal basis for further decisions and future actions.
Engineering
A VIS project team develops all the necessary plans, based on their performance targets, their previously prepared outlines and with the help of their clearly defined target settings - from the building planning to the technological concepts up to the outlines of feasible daily accomplishments. | | |
 |
Procurement
A clearly defined project requires clearly defined measures. An essential part of these measures refers to the projects need for various resources: materials, products, services...- and even money. A carefully prepared procurement concept is therefore essential for a trouble-free realisation of a project.
VIS International is an independent, worldwide acting procurement service, that translates complex projects into action - from investigating the demands, preparing procurement concepts, to the preparation and billing of the required project- resources.
The fact, that a reasonable balance between economic efficiency and quality must be obtained, goes without saying. The execution of relevant market analysis and negotiations with potential partners, as well as detailed cost analysis are therefore just as much part of our tasks as relevant supply source investigations, partner-profiles and recommendations of action. If requested, we even organise an acquisition of finances through various sources.
For all projects in the realisation fase, we continuously monitor the course of the project and protocol the current status. At the end of the realisation stage, a conclusive documentation will provide you with an overview of the most project-relevant details.
| | |
 |
We provide a broad range of specific and taylor-made solutions to meet the requirements of our clients, such as
+ Financial consulting: BOT, TOT, Public Private Partnership, etc.
+ Small scale waste water treatment (4 to 2000 PE): Aquamax®
+ Medium scale waste water treatment (2000 to 10.000 PE)
+ Arsenic removal from drinking water: Ferrosorp ®
+ Plant engineering and manufacturing
| | |
|
|
|
|
VIPA GmbH
|
|
 |
Automation components
Automation components | | |
 |
Automation solutions
Automation solutions | | |
 |
Control terminals.
Control terminals. | | |
 |
Industrial central processing units (CPU)
Industrial central processing units (CPU). | | |
 |
Programmable logic controllers
Programmable logic controllers | | |
|
|
|
|
Videojet Technologies, Inc.
|
|
 |
Ink-Jet Großschrift-Systeme
Besonders im Bereich von Umverpackungen wie z.B. Kartonagen werden die Großschrift-Systeme von Videojet genutzt. Es können damit unterschiedliche Materialien mit Text, Grafiken und Barcodes in mittleren und großen Schriften versehen werden.
Für die Systeme können zwei unterschiedliche Technologien eingesetzt werden. Die Impuls Jet-Technik wurde ursprünglich für die Anwendung im Büro entwickelt, in der Weiterentwicklung hat sie sich auch in industriellen Produktionsumgebungen bewährt. Die Ventil-Technik ist technisch am einfachsten umzusetzen und wird vor allem für Kartonagen eingesetzt.
| | |
 |
Ink-Jet Kleinschrift-Systeme
Kleinschrift-Systeme werden zur direkten Kennzeichnung variabler Daten, wie z.B. Mindesthaltbarkeitsdaten oder Schichtcodes auf industrielle Massenartikel auf kleinen Flächen genutzt. Im Continuous Ink Jet Verfahren können Kennzeichnungen mit kleinsten Schriftengrößen nach ganz unterschiedlichen Anforderungen aufgedruckt werden.
Die Technologie arbeitet mit einem Tintenstrahl, der mit Unterbrechungen auf das Produkt aufgebracht wird. So entstehen Zeichen, Grafiken oder auch Barcodes in hoher Qualität und mit großen Geschwindigkeiten. Und auch für spezielle Anwendungen wie helle Schrift auf dunklen Oberflächen finden Sie hier die richtige Lösung | | |
 |
Laser-Kennzeichnungs-Systeme
In einigen Bereichen ist die Kennzeichnung mit Flüssigkeiten eher problematisch, hier wird auf die Laserbeschriftung gesetzt. Die Systeme sind im Betrieb sauber und für Industrien mit hohem Anspruch an die Verarbeitung geeignet.
Mit diesen Systemen können permanente Kennzeichnungen mit dem Laserstrahl auf verschiedene Produkte eingebrannt werden. Je nach Material variieren die Methoden und können bei harten Oberflächen, wie z.B. Metall auch als Gravur ausgeführt werden | | |
 |
Thermo Transfer Drucksysteme
Für die Kennzeichnung auf flexiblen Verpackungen bietet sich die ThermoTransfer Technologie am besten an. Sie haben damit eine wirtschaftliche Lösung, da auf Etiketten verzichtet werden kann und Kosten eingespart werden. Mit dieser Methode ist es möglich flexible Verpackung, wie z.B. Folien fast vollständig zu bedrucken. Damit finden sich diese Systeme vor allem in der Lebensmittelindustrie. | | |
|
|
|
|
Vacon Oy
|
|
 |
Vacon NXL
Easy to plug, and easiest to play
The Vacon NXL is a powerful and compact AC drive for industrial and residential purposes in the power range from 0.25 to 30 kW.
The space-saving bookshelf design with high protection classes, versatile control and programming capabilities offer an optimal solution for all operating environments. Installation, connection and commissioning procedures are extremely quick and convenient with instructions attached to the unit.
| | |
 |
Vacon NXL
Compact general purpose | | |
|
|
|
|
VAIREX Corporation
|
|
 |
AIR MANAGEMENT SYSTEMS
AIR MANAGEMENT SYSTEMS FOR FUEL CELL APPLICATIONS | | |
|
|
|
|
VALUTEC OY
|
|
 |
2-zone OTC progressive kiln
2-zone OTC progressive kiln | | |
 |
E-cart charged batch kiln.
E-cart charged batch kiln. | | |
 |
Truck-charged batch kiln
Truck-charged batch kiln | | |
|
|
|
|
Van Aarsen Rubber Technology BV
|
|
 |
Hammer Mill GD
High Efficiency
Low operational costs
Low energy consumption
Hygienic construction
Modular cassette holder
Ease of maintenance due to max. access
Optimal hammer velocity for max. grinding efficiency at 1500 rpm
Constructed according latest safety regulations | | |
 |
Main Grinder.
The second step in the VAN AARSEN RUBBER TECHNOLOGY process is the RTG 800 /1250 main grinder. Main Grinding is an ”ambient” mechanical process and is a grinding and not a cutting treatment. The tyre shreds are crushed between toothed rotor and stator tools. The shreds include the steel wires from the beads, which are of help during the grinding process. The toothed tools are grinding tools, hence they do not necessary need to be sharp.
In just this single step the size of the shreds is reduced from (100*150 mm) to a granulate of 0-20 mm of which already 20 % is less then 2,0 mm due to the special design of the machine which is unique in the market. Another benefit of this unique design is that over 96 % of the steel is liberated during this process.
The grinding temperature of approx. 80 degrees Celsius is maintained by adding process water in the main grinder. The water added into the man grinder evaporates during the grinding process and is cleaned in a wet-filter to remove the dust before it is released to the environment.
The ground rubber with the liberated steel wires is transported via a vibration conveyor. The steel is separated from the rubber by several magnets. The separated clean steel is led via belt conveyors to containers outside the production building. The clean steel without rubber is ready for sales.
The ground rubber and fiber mixture is pneumatically transported to the primary screening machine and separated in 3 different grades. In this example we take 0-2 mm, 2-4 mm and 4-20 mm.
The fibers in the rubber are separated in the primary sieving machine and pneumatically transported to the central dust aspiration. | | |
 |
Single Rotor Shredder
The first step in the VAN AARSEN RUBBER TECHNOLOGY process is the SRS 1300/1300 S shredder. Shredding is an ambient mechanical process. The whole tyres including the beads are cut into pieces with a size of approximately 100 x 150 mm. In the shredder, water is added as a lubricant as well as for cooling and dust preventive. The used water goes into a settling tank. The clarified water leaves via the overflow into the sewer. What remains is settled street-dirt (sand ,stones, glass).
After the shredder the intermediate stock could be situated. This intermediate stock enables you to keep processing when the knives of the shredder have to be replaced. The shreds are fed into the main grinder with the intake dosing hopper with rotating scraper. | | |
 |
Wood Pelleting Pellet Mill
The van Aarsen wood pellet mill C900 is specially developed to operate under the extreme conditions, which occur during the process of wood pelletizing. During the development of the Wood Pellet Mill C900 we have used the experience and knowledge of nearly 6 decades in feed milling.
The main advantages of the Van Aarsen C900 Wood Pellet Mill are:
Low energy consumption per ton output
High lifetime of die and rollers
Easy to operate | | |
|
|
|
|
VAN HEES GmbH
|
|
 |
Boiled sausage
Manufacturing high-quality boiled sausage is a question of protein breakdown, curing colour, microbiological stability and full taste. Only an ideal combination of raw-material selection, manufacturing technology and processing additives used will result in top-quality products. We at VAN HEES provide you with an opportunity of meeting the highest expectations with our technological know-how and top-quality products. | | |
 |
Grill sausage
Grill sausage or Bratwurst, whether coarse or fine, is one of Germany’s most popular sausage types. Heavy demands are placed on texture and taste. Grill sausage is a very sensitive product, and keeping the sausage fresh is of paramount importance. VAN HEES offers a broad product range for the grill-sausage sector | | |
 |
Meat refinement
Convenience products are part of the standard range in any butcher’s shop. Refining meat to a delicacy is both a delight to customers and a highly profitable product segment for the butcher. The quality of the final meat speciality is dependent on ideal meat preparation. Rely on VAN HEES for best results! | | |
 |
Raw Ham
Raw ham is one of those delicacies you would expect to find in any butcher’s shop in Europe. Compliance with a large range of quality criteria is necessary in producing ham products with good sensory qualities and long shelf life. VAN HEES products made especially for raw-cured goods represent top technology, maximum product safety and unmistakably good taste. | | |
|
|
|
|
VARO Process Equipment
|
|
 |
Assembly equipment
Assembly equipment
| | |
 |
Diemaking
Diemaking
| | |
 |
Heavy duty equip
Heavy duty equip | | |
 |
horizontal processing tank
horizontal processing tank | | |
 |
Robot cells
Robot cells
| | |
|
|
|
|
Varpe
|
|
 |
Compact checkweigher for in-line monitoring
The model DCI-40 has been conceived to address the market's need for a unit that allows flexibility of application, easy installation and worry-free startup.
The unit is totally modular by design. It incorporates simple systems for both fine tuning the working height level and quickly changing and/or replacing the conveyor belts. It incorporates a graphic display, easy-access control panel and simple menus from which the operator can quickly set the weight parameters | | |
 |
X-ray inspection machine
The RETINAMATIC 2000 equipments are in use for the detection in real time of foreign contaminants as stones, metals, glasses, plastic, etc. In already stiff products or bulk productions with judging sensibilities that can come to 0.5mm (diameter of sphere) depending on the characteristics of the product (density of the same one).
The area of industrial application is indicated for the sectors of food: conserve, pre-coocking, frozen, 4th range, etc.), pharmaceutical, cosmetic, detergents, aerosols, etc...
This equipments allow to inspect different formats of products presentations: groups inside box, bags and metallized trays, carton, tin, etc., covering a great variety of widths and heights of product configurables. | | |
|
|
|
|
Vötsch Industrietechnik GmbH Umweltsimulation
|
|
 |
stability tests
stability tests | | |
 |
test technology
environmental simulation test technology | | |
|
|
|
|
Vecoplan Maschinenfabrik GmbH & Co KG
|
|
 |
Cross-stream-separator
to separate low density fraction from heavy fraction.
Application:
in RDF-treatment-systems for industrial-, bulky- and production-waste. Installation especially between pre- and re-shredding. | | |
 |
Oscillating Screening Machine
For large capacities up to 250 cu.m per hour. Screening of up to four fractions. | | |
 |
Rotary Screening Machine
For medium capacities up to 100 cu. m. per hour. Installation above storage boxes is possible, with up to four fractions going directly into silos. | | |
 |
Shredding
Shredding | | |
 |
trommelhacker
trommelhacker | | |
 |
zerkleinerer
zerkleinerer | | |
|
|
|
|
VEMAG Maschinenbau GmbH
|
|
 |
Convenience
VEMAG Convenience System
Automatic filling flow divider 803
Diaphragm 821
Filling head 981
Coex 891
Coex 892
Coex 893
Coex 894
Forming machine 250
Kebab line 703
| | |
 |
Grinding systems
Sausage grinder 980
Separation grinder 982
Separation grinder 982 for poultry
Minced meat portionier MMP 220
Minced meat attachment 801
Separation attachment 801
Automatic separation valve
| | |
 |
Sausage lines
Casing holding device DHV 841
Casing holding device DHV 937
Length portioning device LPV 802
Length portioning machine LPG 202
Casing magazine 206
Cutting machine TM 203
Hanging machine AH 204
Casing applier 804
| | |
 |
Vacuum fillers.
ROBOT 500
ROBBY / ROBBY-2
ROBOT HP E-series
ROBOT HP25E
ROBOT DP12C
ROBOT DP C-series
Portioning computer with graphical user interface
VEMAG Online net
Vacuum hopper 149
VEMAG tool trolley
| | |
|
|
|
|
Venjakob Maschinenbau GmbH & Co. KG
|
|
 |
Brushing units
denibbing and sanding of wood work pieces
wiping of oiled work pieces
polishing of waxed wood parts
structuring | | |
 |
Dedusting
Dust removal devices remove loosely adhering dust particles from the workpieces by means of rotating blowing nozzles. The use of ionisation devices makes it possible to neutralise surfaces. | | |
 |
Finishing lines
VEN SPRAY PIPE
Steelpipe spray coating machine With UV-curing
Powerful convinces this especially designed plant technology for the application of a temporary corrosion protection on round steel pipes
| | |
 |
Pretreatment
Dust removal & ionisation
The predominant number of plastic materials used today has a very strong tendency to build-up electrostatic surface charges. This complicates the coating process. The use of ionisation devices makes it possible to neutralise surfaces. | | |
 |
Rotary devices
The processing of work pieces frequently requires a rotation from lengthwise to crosswise or crosswise to lengthwise. | | |
 |
UV drier
Performance optimised UV lamps are used in the VEN DRY UV dryer. These feature emission spectra perfectly matched to the individual paint/lacquer | | |
|
|
|
|
Vestas aircoil A/S
|
|
 |
aircoils
aircoils | | |
 |
compact coole
compact coole | | |
 |
Cooling towers
Nature´s own method
Cooling towers offer the cheapest, most efficient and most natural method for cooling water. That is because nature itself creates the cooling effect. In a cooling tower, water flows against an airflow down a liner with a large surface area. By this direct contact between water and air, a small amount of water evaporates, thereby cooling the remainder of the water circulated. The cooling water may typically be cooled below air temperature.
Lots of uses
Cooling towers may be used to great advantage in industries using cooling water e.g. in process cooling, cooling of condensers, hydraulic oil, autoclaves, evaporators, extruders, fermenters and engine testing beds.
| | |
 |
Water mist catchers / Water separators
introduced.
Our water mist catchers are manufactured from stainless steel AISI 304.
We use a fully welded constructions so that every vane is bonded to the support struts, thus making the water separator far more robust than other types where there is no welding.
We supply for both newbuildings and replacement / spares market.
Vestas can also replace water mist catchers for other specifications. We just need a drawing in order to quote.
Benefits with Vestas water mist catchers
· Prevent cylinder liner scrubbing from the water carry-over from the air cooler
· Give an improved engine performance by lower humidity in the charge air
· Continues focus R&D to improve our water separators
· Tailor made to meet your specific needs when it comes to replacement
In October 2006 MAN Diesel / Vestas developed a new design. Here the welding is even more extensive around the vanes and the material thickness is increased giving a longer product life time.
At Vestas we provide approved products, with a choice of “standards” to meet your requirements.
Send an enquiry for a new water mist catcher here.
| | |
|
|
|
|
Vester Elektronik GmbH
|
|
 |
Inductive Analog Sensor ISS type (ISS-20-30-1-A)
Inductive Analog Sensor ISS type (ISS-20-30-1-A) | | |
 |
Infrared Fork Light Barriers PMI 6 mm-type
Infrared Fork Light Barriers PMI 6 mm-type | | |
|
|
|
|
Vetter GmbH
|
|
 |
Leak Sealing Bags
Leak Sealing Program - Leak Sealing Bags | | |
 |
Gully Sealing Bags
Gully Sealing Bags | | |
 |
Pipe and Test Sealing Bags
Pipe and Test Sealing Bags | | |
|
|
|
|
VFK Head Corp.
|
|
 |
Plastic technology
Machinery and equipment for the plastics and rubber industries | | |
|
|
|
|
VUM GmbH
|
|
 |
Compact scrubbers for laboratories
characteristic features of compact scrubbers
self-aspirating, no additional fan is needed
high separation efficiency for the entire operating range
robust absorption behavior, even with large flow rate variations
module consisting of jet scrubber and column
integrated pump
optional measuring and control equipment (e. g. pH, redox, temperature, density, and/or level control)
compact dimensions versatile
cost-efficient
| | |
 |
Gas scrubbers
Gas scrubbers | | |
|
|
|
|
Vitro Laser GmbH
|
|
 |
Customized products
Optimal laser systems for individual requirements.
Proximity to customers and customer-orientated products – phrases? Not for Vitro Laser! | | |
 |
Laser systems for flexible glass processing.
The VITROLUX-C v.3 from Vitro Laser GmbH is the ideal link between single-part and small mass production. This mobile system ensures a maximum of flexibility for the place of installation. | | |
 |
OEM solutions
As specialist for subsurface engravings, we manufacture reliable laser heads as in-house production.
The technology is applied in many areas and forms. Beside of these complete laser systems we supply our customers with OEM solutions for individual conversion.
Vitro Laser GmbH supports your progress. | | |
 |
VITROLUX-MC v.2
The VITROLUX-MC v.2 guarantees high speed of operation, precision and outstanding results at the laser subsurface engraving of glass objects. | | |
 |
Vitrolux-UC v.3
Laser technology for flexible treatment of glasses. The VITROLUX-UC v.3 of the Vitro laser GmbH is particularly suitable for mobile employments on fairs and other events.
| | |
 |
VITROLUX-V v.1
The VITROLUX-V v.1 was specially developed for the refining of big work pieces and mass-production. The modular construction and the additional loading table enable to laser-process glass object of user-defined length | | |
|
|
|
|
|
