|
Henninger GmbH & Co.KG
|
|
 |
air speeders
air speeders | | |
 |
milling heads
milling heads | | |
|
|
|
|
Hifab AB
|
|
 |
Hifab
Hifab | | |
|
|
|
|
Higel Kältetechnik e.K.
|
|
 |
ice fairy
Hello, I'm the Higel ice fairy!
I'll help you to find your desired product quickly and easily.
You now have the following choices:
[ 1 ] continue to be guided by the ice fairy
[ 2 ] select a Higel product according to type description
[ 3 ] select a Higel product from the table
[ 4 ] get to know the Higel product maxims
[ 5 ] Scale ice makers ONLINE | | |
|
|
|
|
HILDEBRAND BRUNNER
|
|
 |
Conventional lumber dry kilns
Is lumber drying your responsibility?
Then you should know what HILDEBRAND can do for you. We will meet your needs with the very best lumber dry kilns and control systems.
Our products offer more and more safety and quality. They are environmentally friendly and deliver maximum performance. Our drive for improvement combined with decades of experience is obvious in our conventional lumber dry kilns.
All our kilns include: Highly insulated aluminum or stainless steel construction, reversible heating and ventilation technology, maximum drying quality and drying performance, environmentally friendly and energy efficiency.
| | |
 |
High temperature kiln
An advantage of the high temperature drying is the shortening of the drying time. High temperature Kilns are mainly used for the drying process of pallets,studs and scaffel boards.
The heating of high temperature kilns is done with high-pressure steam or Thermooil. The kiln has a special insulation and is also available as completely welded sealed unit.
| | |
 |
HILDEBRAND PROGRESSIVE KILN
Example of a Hildebrand progressive timber dry kiln (counterflow principle) which was installed in 1978 at BSW Timbers in Great Britan – still in operation today. | | |
|
|
|
|
HILGELAND NUTAP GmbH
|
|
 |
Thread Rolling Tools.
Thread Rolling Tools. | | |
|
|
|
|
The Hilliard Corporation
|
|
 |
Filter press
Star Plate and Frame Filter Presses are designed and built to provide you with years of dependable service. Filters are sturdily built, with a rugged carbon steel stand coated in durable epoxy paint. Standard heads, plates, frames, and their components are fabricated from solid bars, plates, and forgings of 304 stainless steel. Heavily reinforced for maximum life, the precision-machined plates, frames, and heads warrant a tight seal and near-zero leakage without gaskets.
Star Filter Presses can be fabricated in 316 and 316L stainless steel, as well as other special alloys upon request.
Applications include:
• Food and Beverage Processing
• Mining and Metalworking
• Pharmaceuticals, Cosmetics, Biotech Processing
• Chemical and Petrochemical Processing
Benefits:
• High sludge capacity
• Low maintenance
• Large filtration surface area
• No gaskets to maintain
• Excellent corrosion resistance
• Withstands temperatures of up to 375ºF (190ºC)
• Easy to operate, simple to clean
• Expandable by adding plates and frames
• Low filter media replacement costs
• Easy to sanitize
• Minimal plate stack drip
• High liquid flow rates
• Portable
Brake
Clutch and brake
Pneumatic engine starter
Wine production filter
Mobile oil filtration unit
Filter housing for liquid filter
Oil filter
Industrial categories of this manufacturer:
> Air treatment and air filtering equipment
> Air filter, Gas filter
> Liquid filter, Water filter
> Ball valve, Plug valve
> Liquid filtering equipment
> Clutch
> Torque limiter
> Brake
> Pneumatic motor
> Hydraulic filter, Oil treatment
| All the industrial Manufacturers | Supplier, Dealer and Distributor listing | Quotes, price list | Comparative test
| Technical characteristics and specifications | Documentation and PDF catalogue | New and used sales directory |
Copyright © DirectIndustry
soc-pmea www di En 2008-06-26-25 | | |
 |
Gas filter
Dry seals for compressors and turbines require clean, dry gas to maintain seal integrity and ensure longevity. Gas seal support systems as specified in API-614 require filters and sometimes water-removing coalescers to ensure gas quality to the seals.
For critical seal gas filtration, the ideal arrangement is to have “duplex” filters. In the duplex configuration, there is always one filter on-line filtering and/or “drying” the gas, even when the other filter element is being replaced.
Dry Seal Gas Duplex Filters meeting API-614:
• Reduce cost by eliminating expensive stainless steel fittings and assembly time. Compact design saves space
• Simple duplex housing arrangement reduces possibility for incorrect operation and potential for shutting off the dry gas seal flow
• Zero-leak integral transfer valve and double block valves provide assurance of tight shut off when replacing elements
• 316 stainless steel materials
• ASME code construction
• Available with coalescing (liquid removal) and filter (particulate removal) cartridges
• Designs to 2600 PSI
| | |
 |
Membrane separation system
The HILCO ceramic membrane system is an ideal way to lower your oily-water waste disposal costs. The filtration system utilizes high-velocity fluid “crossflow” across the face of the membrane. The oil-free water passes through the ceramic membrane while the oily waste is concentrated in a process reservoir. Depending on the particular waste stream disposal, volumes can be reduced as much as 20x. The system is designed to accept three different micron-rated membranes (0.2 µm, 0.01 µm, and 0.005 µm) in order to meet all specific local discharge ordinances.
Features and Benefits include:
• High Packing Density
• Broad PH Range of 2-13
• Resistant to Thermal Shock
• Back Flushable
• Immune to Chlorine Attack
• Durable Ceramic Extends Lifetime
• High Surface Area to Unit Volume
• Compact Design
| | |
 |
Oil mist eliminator
The HILCO vent mist eliminator is the answer to economically reclaiming the oily vapor found in the air stream of vents of lubrication oil systems on large, high-speed rotating equipment. These include gas turbines, turbo compressors, reciprocating engines and gearboxes.
The vent mist eliminator improves safety by eliminating oily residue cause by setting oil mist on engine room floors, stairways, etc., keeps the environment clean and helps prevent exterior oil contamination of buildings and grounds. There are currently three versions available: Blower Assisted, Mist Eliminator with Heat Exchanger, and a Coalescer-Only model. All models have DM type coalescers and eliminate oil mist with an efficiency of 99.97% removal of all airborne contaminant regardless of particle size.
Our vent mist eliminator collects, coalesces and filters the mist, significantly reducing visible oil plume. The captured oil is returned to the sump or crankcase, quickly and efficiently for reuse. Available in sizes and models to fit your specific application, HILCO vent mist eliminators are virtually maintenance free.
Hilliard also makes HILCO-quality replacements for other brands of mist eliminators.
| | |
|
|
|
|
HILMA - ROEMHELD GmbH
|
|
 |
Workpiece power workholding | Machine vices
Mechanical, mechanical-hydraulic and
hydraulic workpiece clamping systems and
standard fixtures for machine tools,
machining centres and flexible manufacturing systems
Machine vices
Double and concentric vices Compact clamps
Tower and multiple clamping systems
| | |
 |
Workpiece power workholding | Machine vices
Mechanical, mechanical-hydraulic and
hydraulic workpiece clamping systems and
standard fixtures for machine tools,
machining centres and flexible manufacturing systems
Machine vices
Double and concentric vices Compact clamps
Tower and multiple clamping systems
| | |
|
|
|
|
Hilti AG
|
|
 |
angle grinders
angle grinders | | |
 |
accumulator screwdrivers
accumulator screwdrivers | | |
|
|
|
|
Hipak Hidrolik
|
|
 |
gear production technology
gear production technology | | |
|
|
|
|
Hitachi Koki Co. Ltd
|
|
 |
accumulator screwdrivers
accumulator screwdrivers | | |
 |
compass saws
compass saws | | |
 |
disc grinders
disc grinders | | |
 |
Electric saws
Electric saws | | |
|
|
|
|
HIWIN GmbH
|
|
 |
Ball bearings
HIWIN ball bearings with patented recirculating ball steering system provide for a highly accurate linear motion with low friction and lower moise emissions. The specially-developed ball steering systems allow for unlimited heights of lift. | | |
 |
Ballscrews
HIWIN ballscrews are used as driving elements an feeding devices. They are employed for the conversation of rotary motion into linear motion and vice versa. HIWIN ballscrews are available in any accuracy grades. Our ballscrews are technicallyfully developed and have been proving to be a success in practice for more than 20 years. Many customers use our know-how an order special developments from us. Due to our flexible production we are able to manufacture also individual items cost-efficiently..
| | |
 |
Linear actuators
HIWIN linear actuators are not only employed in the fields of rehabilitation and homecare but also in industrial technology where the following features are demanded:
easy and compact structure
high stiffness
easy handling for the user
easy installation
low noise emission | | |
 |
Linear guideways
in standard and heavy-load equipment for linear, highly accurate motion. Continuously rotating balls that are moving in ground slide ways between rail and block ensure low friction and connect the block with the rail in two directions form-lockingly.
| | |
|
|
|
|
HKS-Prozesstechnik GmbH
|
|
 |
WeldAnalyst
System for the high dynamic analysis of welding processes | | |
 |
WeldQAS
System for the monitoring, visualization and documentation of arc welding processes
| | |
 |
WeldScanner
Mobile, durable system for the measurement, recording and calibration of the most important
welding data | | |
|
|
|
|
HOBART GmbH
|
|
 |
GC
PRODUCT ADVANTAGES
Usable for all kinds and sizes of glasses, coffee dishes, ice bowls, etc.
Loading height above average: 325 mm, for easy loading of extra high glasses
Ready to install: incl. fill and drain hoses, power cord, non-return valve, rinse aid and detergent suction hoses
Automatic dispensing of detergent and rinse agent integrated
Included drain pump: operation independent from on-site drain connection
Interactive control panel SMARTRONIC: with colour coded status indication, for easy handling
Automatic cycle control to guarantee hygienic rinse temperatures
Optimum hygienic safety due to rounded tank and self cleaning cycle
Double wall construction enables low noise and energy saving operation
Water softener NONSTOP: regenerates simultaneously to the wash cycle without interrupting the cycle duration
Optional: large containers for detergent and rinse agent with fill level indication, reduce re-fill frequency and save space next to machine
Optional: switchable cycle with cold water rinse for cool glasses, to use them immediately after washing
Multiphasing: can be connected to 230/50/1 as well as 400/50/3N (standard machine comes with single phase cable) | | |
 |
PROFI FX
PRODUCT ADVANTAGES
Fresh water model AQUA-FRESH: suitable for high capacities in continuous operation
Fine filter system GENIUS-X²: advanced filter system with pre-wash function, reduces detergent consumption up to 30%
Single button operation SMARTRONIC: colour coded status with indication of remaining cycle time, for easy handling
Rinse pump ACCURINSE: guarantees rinse with constantly 2.5 l, independent from on-site pressure. Saves up to 30% water, energy and chemicals
X-Change cycle AQUA-NEW: automatically drains the tank completely and fills it with fresh water anytime when required. Ideal after washing heavily soiled or fat loaded items
Wash system ROTOR: separately rotating wash and rinse arms, for dynamic wash power
Wide angle wash jets FAN: distribute wash water equally into the wash chamber
Tank heater ECOTHERM: achieves optimum wash results by constant wash temperature of 62°C
Water softener NONSTOP: regenerates simultaneously to the wash cycle without interrupting the cycle duration
Multi-setting: Can be connected to 400/50/3N as well as 230/50/1 (standard machine comes with three phase cable)
TECHNICAL DATA | | |
|
|
|
|
HOERBIGER Automatisierungstechnik Holding
|
|
 |
Aluminum linear guide
Guideline aluminium profile roller guides provide smooth operation and high load carrying capacity for industrial automation.
By use of light weight aluminium components the moving masses are reduced, travel speeds are increased and actuation energy is saved.
The orientation of rollers enables the system to carry high loads in all directions, and the options of single or double rail versions provides flexibility to suit wide spread applications | | |
 |
Pneumatic cylinder
High performance, long life, low maintenance: the top quality of HOERBIGER-ORIGA's rod type cylinders is a result of decades of experience. Special customer specific solutions are part of our daily business.
Innovative cylinder concepts with excellent characteristics are the basis of the HOERBIGER-ORIGA cylinder programme. The inherent advantages are important factors for operation in system solutions. Modern automation with high efficiency is no longer a dream. Special solutions, which are developed for individual projects, guarantee optimal efficiency. | | |
 |
Rodless electric linear actuator
HOERBIGER-ORIGA now offers the complete solution for linear drive systems. Designed for absolute reliability, high performance, ease of use and optimised engineering the ORIGA System Plus satisfies even the most demanding applications. | | |
 |
Rodless pneumatic linear actuator
Based on the ORIGA rodless cylinder, proven in world wide markets, HOERBIGER-ORIGA now offers the complete solution for linear drive systems. Designed for absolute reliability, high performance, ease of use and optimised engineering the ORIGA System Plus satisfies even the most demanding applications. | | |
 |
Shock absorber
Shock absorbers decelerate loads smoothly and securely using the least possible force and in the shortest time, enabling significantly higher cycle times in automated operations.
Some commonly used stopping devices such as springs, rubber buffers or dashpots actually increase shock loading instead of reducing it %u2013 they do not dissipate energy at a uniform rate.
For smooth dissipation of the kinetic energy we recommend the use of hydraulic shock absorbers.
HOERBIGER-ORIGA shock absorbers convert the kinetic energy generated by the deceleration of the load into thermal energy.
Optimum operating conditions are achieved if the energy is dissipated almost uniformly, i.e. if the moving mass is brought to a halt in the shortest distance, in the shortest time and without sudden peak loads during the stroke. | | |
|
|
|
|
HGH GmbH & Co. KG
|
|
 |
EDM drilling machine
EDM drilling machine | | |
 |
EDM machine.
EDM machine. | | |
 |
Wire eroder
Wire eroder | | |
|
|
|
|
HEUN Werkzeugmaschinen & Industriebedarf GmbH
|
|
 |
Pos 350
In cooperation with Abacus GmbH we have developed
the high-speed EDM-drilling machines of the APos series.
We offer you machines with motor-controlled table actuation, CNC-control, the proven ED-alpha head and
the EDM-high-speed generator in German first-class quality | | |
|
|
|
|
HEULE WERKZEUG AG
|
|
 |
chamfering tool
chamfering tool. | | |
 |
counterboring spotfacing tool
counterboring spotfacing tool. | | |
 |
universal deburring tool
universal deburring tool | | |
|
|
|
|
Henrich Maschinenfabrik GmbH
|
|
 |
Multi-Wire Drawing Machines
Multi-Wire Drawing Machines | | |
 |
Rod Breakdown Drawing Machines
Rod Breakdown Drawing Machines | | |
|
|
|
|
HEPRO GmbH
|
|
 |
Vegetable peelers
Vegetable peelers | | |
 |
Vegetable processing equipment
Vegetable processing equipment | | |
|
|
|
|
HERBERT BIRNBAUM
|
|
 |
Bread and Pastry Sprayer
Bread and Pastry Sprayer
with spiral hose of highest quality
working reach up to 6 m
water tap connection ˝ “
to be connected to the regular water pipe
| | |
 |
Special cleaning machine for proofing baskets
Special cleaning machine for proofing baskets | | |
|
|
|
|
Herbert Hänchen GmbH & Co. KG
|
|
 |
Hydraulic cylinders
The finest way to treat hydraulic cylinders: Hänchen quality
| | |
 |
Industrial shock absorbers
Industrial shock absorbers | | |
 |
Punching cylinders
setting the pace | | |
|
|
|
|
Herbold Maschinen- und Anlagenbau GmbH, Neue
|
|
 |
Pulverizer
Pulverizer for the plastic and rubber industry | | |
 |
shredder-granulator-zerkleinerung
shredder-granulator-fot the plastic and rubber industry | | |
|
|
|
|
Herbold Meckesheim GmbH
|
|
 |
Granulators - SML Series
The SML models are machines for normal, everyday use in the plastics industry, besides the press or extruder as the central granulator for larger parts, as edge trim cutters and for many more application possibilities.
Granulators of the SML series are available with rotor diameters from 220 to 800 mm (8 to 30 inches), a working width of 300 to 1450 mm (12 to 56 inches) and drive motors from 5.5 kW to 160 kW (7.5 to 210 HP). The C-types of the SML series are available with a space-saving fully integrated sound enclosure. | | |
 |
Herbold HOG-Shredder - Series HGM
The New Series: Low Speed HOG-Shredders
HERBOLD Meckesheim GmbH has developed a new series of low-speed HOG-shredders, expanding their product range:
HGM series, available in two sizes
- HGM 60/100 and HGM 60/145 | | |
 |
Pulverizers and fine grinders
Our fine grinders model SMF and our disc pulverizers model PU have been designed for the pulverization of plastic granules, regrind, soft and semi-rigid materials. The final particle size to be obtained ranges between 0-1000 microns and 0-200 microns, depending on the type and configuration of the machines.
Our focus and special knowledge centers on the pulverization of soft and rigid PVC, of PE for coating, rotomolding and the textile industry, of cellulose and the production of metal powders, e.g. calcium.
The fine grinders model SMF are preferably used for soft, fibrous, thin-walled and/or elastic materials, e.g. PE drilling and milling shavings or cellulose sheets.
The disc pulverizer model PU is used for grainy or brittle materials, e.g. PE-granules or rigid PVC regrind. We provide systems with and without screening machines, tandem systems with a pre-pulverizer for the raw material and a separate re-pulverizer for the oversize material returned from the screener. | | |
 |
Shredders: Single-shaft and two-shaft shredders
For pre-granulation as well as larger particle sizes we offer shredders with one or more shredder shafts. There are four different designs:
Single shaft shredders model EWS with working widths of 1000 to 2000 mm (39 to 78 inches) and drive motors from 37 kW to 200 kW (50 HP to 250 HP). The shredder rotor is equipped with replaceable knives and is force-fed by a hydraulic pusher device. A screen determines the particle size of the final product. A special type of the EWS models is capable of using screens down to 10 mm (1/4 inches), thus directly producing a re-injectable or extrudable regrind out of big, voluminous parts (bumpers, pallets, boxes, fuel tanks). | | |
|
|
|
|
Herborner Pumpenfabrik
|
|
 |
Horizontal waste water and sewage pumps
The waste water pumps 303 PY as well as the sewage pumps 303 PQ and UNIVERS-P are centrifugal pumps of horizontal design suitable for the application in pumping stations as well as in the entire field of sewage-treatment. The pumps are driven by V-belt drive or direct by means of a coupling. | | |
 |
Sewage pumps
Sewage block pump UNIPUMP
UNIPUMP and UNIVERS-A as block-type units transfer sewage in industrial processing plants, on ships and in sewage-treatment plants... | | |
|
|
|
|
Heripack Verpackungsmaschinen GmbH & Co. KG
|
|
 |
Packageing solutions
Carton erectors and Case erectors
Carton and case filling machines | | |
 |
Packageing solutions
Rigid container filling and sealing machines
Closing and sealing machines | | |
|
|
|
|
HERMA GmbH
|
|
 |
label applicator
Labeling machines | | |
 |
semi-automatic machines
semi-automatic machines | | |
|
|
|
|
Hermann Bilz GmbH & Co. KG
|
|
 |
Countersinking an Re-boring
Countersinking an Re-boring | | |
 |
Drilling
Drilling | | |
 |
Finish Machining
Finish Machining | | |
|
|
|
|
Maschinenfabrik Berthold Hermle AG
|
|
 |
cnc machine tools
cnc machine tools | | |
 |
cnc machining centers
cnc-machining-centers | | |
 |
Pallet changers
Pallet changers | | |
 |
Universal milling machines
Universal milling machines | | |
|
|
|
|
Herrmann Ultraschalltechnik GmbH & Co. KG
|
|
 |
PLASTICS SERIES Welding Systems
DIALOG digital control:
Computer Numeric Controlled (CNC) Ultrasonic Welding Systems for maximized weld quality and consistency
Weld Modes: Depth RPN, Absolute Distance, Time, Energy, Power (Pmax), ADEPT Mode
MPC(+) digital:
Microprocessor Controlled Ultrasonic Welding Systems for typical applications
Weld Modes: Depth RPN, Absolute Distance, Time, Energy, Power (Pmax)
CONVENT digital:
Microprocessor Controlled Ultrasonic Actuator Systems for less complex applications
Weld Modes: Time, Energy, Power (Pmax) | | |
|
|
|
|
HERZ Armaturen GmbH
|
|
 |
HERZ-Thermostatic Valves
Are you looking for thermostatic valves that meet the highest demands in terms of engineering, comfort, and attractive design? | | |
 |
Manual control valves
Everything under control - with manual control valves HERZ-DR-T-90 and HERZ-GP | | |
|
|
|
|
Hoffmann GmbH Maschinenbau
|
|
 |
Manual routing machine
Hoffmann offers a complete range of machinery to process the Hoffmann-keyways. The working cycle of each machines is designed to be as efficient as possible. From the manually operated bench-top models to free-standing machines with multifunctional characteristics.
manual > semin-automatic > CNC-controlled processing | | |
 |
Pneumatic Dovetail Routing Machines
Free standing model fitted with 1000 W motor as standard. To produce a single dovetail slot in each work-piece per machine cycle. Solid cast machine table and large working surface.
| | |
|
|
|
|
Hoffmann Fördertechnik GmbH
|
|
 |
electric chain hoists
electric chain hoists | | |
 |
Electric chain hoists for three phase suply
Electric chain hoists for industrial applications | | |
 |
Electric chain hoists STAR LIFTKET
The STAR LIFTKET was developed with consideration of the latest knowledge in the hoisting business. It became one of the most advanced products in the market | | |
|
|
|
|
HOLLFELDER-GÜHRING GmbH
|
|
 |
boring bars
boring bars. | | |
 |
Machine Tooling ,Work holding devices, Tools
Machine Tooling ,Work holding devices, Tools | | |
|
|
|
|
HURCO GmbH
|
|
 |
Vertical Machining Centre
High performance spindle and drives with high torque
A balanced precision spindle with high torque and a maximum speed of up to 12.000 rpm provides you with the necessary flexibility for a wide range of machining applications
High rapid travel speeds
Digital state of the art servo drives
Large door opening for easier loading of the work piece
Oil separator
Chip wash down system with chip conveyor
Simple retrofitting/updating of Hurco software options
Highly developed arithmetic algorithms guarantee a precise jerk-free motion
High quality encoder systems and digital drives garantee permanent precision even under difficult operation conditions
Acceleration of up to 0.9 g
High rigidity and perfect vibration absorption by means of an intelligent ribbing of the machine column
Tool changer with 24 stations utilising variable pocket coding for quicker toolchanger operation
Communication via network grants a fast and reliable data transfer | | |
|
|
|
|
Husky Injection Molding Systems Ltd.
|
|
 |
HyPET Systems
HyPET Systems is based on the proven Hylectric platform and runs single-face molds. It is a highly flexible and fast preform production system available from 90 to 500 tons (900 to 5000 kN) and capable of running 8 to 144 cavity molds. | | |
 |
Index Systems
Using our patented rotating turret clamp with two sets of cores, the Index system is ideal for higher volume and heavier weight preform applications. With a 600 ton (6 000 kN) clamp it has the capacity to run molds from 32 to 144 cavities | | |
 |
IndexSB Systems
The Index Stretch Blow (IndexSB) system combines injection molding with stretch blow molding to produce bottles, jars and containers ranging from 25 mL to 5 L (1 oz. to 1.25 gal.) and neck finishes from 18 to 110 mm (0.71" to 4.33") on a single machine. | | |
 |
Preform Molds
Husky's preform molds are designed and built to produce the highest quality preforms and improved productivity. We continue to invest in dedicated mold manufacturing facilities in USA, Canada and Luxembourg to increase capacity and maximize part quality. Preform molds are available from 2 to 144 cavities. | | |
|
|
|
|
Hutzel DrehTech GmbH
|
|
 |
Bone screws.
screws. | | |
 |
CNC turned parts.
CNC turned parts. | | |
 |
Precision turned parts
Precision turned parts. | | |
|
|
|
|
HWG Inductoheat GmbH
|
|
 |
contract hardening
contract hardening | | |
 |
induction systems
induction systems | | |
 |
inductor construction
inductor construction | | |
|
|
|
|
HYDAC International GmbH
|
|
 |
| | |
 |
hydraulic fittings
hydraulic fittings | | |
|
|
|
|
Hydrafeed Limited
|
|
 |
Bar feeder with bar magazine
Bar feeder with bar magazine | | |
 |
Chamfering machine
Chamfering machine | | |
 |
Hydrodynamic guide bar feeder
Hydrodynamic guide bar feeder | | |
|
|
|
|
HYDRO INTERNATIONAL
|
|
 |
Grit King
The Grit King® Process separates, cleans and dewaters grit from raw sewage and other liquids prior to delivering the grit to a skip ready for disposal. The Grit King® Process consists of a Grit King® Hydrodynamic Separator with backwashing system using air or water, a grit removal system (pump or gravity), a Grit-Cleanse™ or Grit Classifier and all connecting pipework. The Grit King® Separator requires no external power source, as it uses the inherent energy of the influent with a headloss of typically less than 150 mm. | | |
 |
Hydro-Brake
A self-activating device that uses vortex technology to control and attenuation flow in collection systems.
The Hydro-Brake® Flow Control is a self-activating vortex flow control device that provides superior hydraulic performance over conventional flow regulators with patented features that reduce maintenance requirements.
Hydro-Brake® Flow Controls harness the energy inherent in the flow field, they have no moving parts and no external energy requirements. With clear openings up to 600% larger than conventional flow control devices, the risk of blockage is reduced to an absolute minimum. In addition, the unique head discharge characteristics reduce storage volume requirements, thus lowering project costs.
The Hydro-Brake® Flow Control offers cost savings on applications ranging from CSO diversion structures and flood control to stormwater storage facilities, treatment plants and other stormwater management schemes for new developments.
Hydro International offers a variety of patented models designed to enhance performance in the most difficult and challenging situations. Our engineers can advise on how the Hydro-Brake® Flow Control can be customized to meet your requirements and provide the optimal solution for your projects.
| | |
 |
Stormcell
Stormcell® is a low cost, underground storage system suitable for installation beneath roads, car parks and amenity areas and permits access for inspection. Stormcell® is installed utilising a patented pipework system which prevents the entry of silts and grits into the storage volume.
Virtually maintenance free and more effective than conventional systems, Stormcell® is a high capacity stormwater storage system which can be designed to suit shallow, deep or irregular site requirements.
Advantages • Modular and flexible.
• Lightweight.
• High structural integrity – suitable for installation below roads, car park and amenity areas.
• Patented silt prevention system when installed correctly.
• Very quick and easy to install.
| | |
 |
Swirl-Flo
A high rate solids/liquid separation process suitable for primary treatment.
The Swirl-Flo® Process employs the Hydrodynamic Separation principle to produce a complex, stable controlled flow regime providing maximum opportunity for flocculation and solids removal.
The process can be used with or without chemical addition. Without coagulants and flocculants, the process provides the performance equivalent of conventional primary sedimentation in typically a fifth of the ground area, resulting in significant construction cost savings.
The Swirl-Flo® Separator can be supplied as a freestanding vessel for low flow rates or as a collection of stainless steel components to be installed within a concrete shaft by others in the case of higher flow rates
| | |
|
|
|
|
Hydromec S.r.l.
|
|
 |
STAINLESS STEEL SQUARE WORM GEARBOXES
designed stainless steel worm gearboxes for special applications:
a) Marine
b) Chemical
c) Food Processing
d) Out Doors Application
e) Winches
f) Valves Actuators
| | |
|
|
|
|
Hydrosol Produktionsgesellschaft mbH & Co. KG
|
|
 |
Hydrosol gives ice cream a creamy consistency
Ice cream, sorbets, water ice and sherbets
Our Stabilising and Emulsifying Systems give the different types of ice a creamy consistency, excellent storage properties and good tolerance to temperature fluctuations. In ice cream systems, stabilisers are used to bind water and thus achieve a higher viscosity. Emulsifiers stabilise the fat and ensure the even distribution of tiny air bubbles.
| | |
|
|
|
|
HYFORE ENGINEERING LIMITED
|
|
 |
Hydraulic fixtures
We design and manufacture a wide range of component fixturing devices both power-clamped and manual. Each device can be hard mounted to the machine table or mounted in our design rotary devices for the machining of multiple component faces in one clamping.
| | |
|
|
|
|
Hygrocontrol GmbH
|
|
 |
Hygrocontrol
high precision at low prices
wall mount and duct type versions with fixed probes
precalibrated interchangeable sensor units
simple operation and maintenance
user may calibrate and configure himself
displays also absolute or dewpoint values on your request
probes in PP, PTFE or SS-316 with 20 mmD.
Up to 2 relays as option
Analog and/or digital outputs available | | |
|
|
|
|
Hymmen GmbH
|
|
 |
Hymmen CTK Thermo-Laminating Plant
Hymmen CTK Thermo-Laminating Plant for working widths of 1300 mm - 2600 mm.
For all laminating jobs in wood based panel industries.
Laminates paperfoils of 23 g/m² onwards.
Uses effective urea glue systems with sparate hardener and resin application .
Important advantages
Modular line concept for all requirements.
Excellent surface quality
Maximum capacity
Good economics
High performance up to 40 m/min
Use of cost effective UF glue systems.
Hymmen RollPress lines are unmatched in the processing of all modern paperfoils with highest printing quality, and lacquer finish with natural touch
High machine availability due to high service life. | | |
 |
Hymmen IsoPress®
Our Hymmen IsoPress® series HPL is the worldwide best-selling Double Belt Press for the continuous production of decorative laminates and technical laminates.
Important advantages
Economic advantages due to reduction of material, energy and personnel
Reproducible high quality by even isobaric pressure and temperature
Low production costs by high capacity
Economic and environmentally friendly by continuous process
Suitable for roll or sheet material | | |
 |
Hymmen ProfiCoater,
The Hymmen ProfiCoater, a complete single operator lacquering line for solvent-free lacquers.
Important advantages
Simple operation due to ergonomic design
Savings of up to 70 %
High flexibility due to either the low cost one man operation with reverse transport or with straight passing through transport for two man operation
High adaptability; extensions with additional roller-, smoothing- or sanding aggregates are possible
| | |
 |
Roller application machine
Roller application machine for the application of liquid media for workpiece widths from
400 mm - 1.600 mm.
Important advantages
Highly economical due to fast cleaning
Easy removal of all lacquer carrying parts
Workpiece transport by belt or roller conveyor
Simple operation due to ergonomic design
Use of the latest application roller sleeve technology
Precise height adjustment with integrated lubrication
Frequency controlled drive technique; pneumatically controlled doctor blade pressure | | |
|
|
|
|
Hyster
|
|
 |
Hyster lift trucks
Hyster Company is a full-line producer of materials handling equipment. We produce over 130 models powered by either gasoline, LPG, diesel or electric. Hyster lift trucks also offer the widest capacity range in the industry – from 1,500 to 105,000 lbs. Known for their ergonomic designs, Hyster trucks are engineered to improve operator comfort and productivity. | | |
|
|
|
|
Huhnseal AB
|
|
 |
double cartidge seal
double cartidge seal for heavy duty applications | | |
 |
Specialist seals
specialist seals for specific pump | | |
|
|
|
|
Hugo Beck GmbH & Co. KG
|
|
 |
resealable-bags
resealable-bags | | |
|
|
|
|
Hubert Karnasch GmbH
|
|
 |
belt gringing machines
belt gringing machines | | |
 |
bending tools
bending tools | | |
 |
pipe bending machines
pipe bending machines | | |
 |
rounding machines
rounding machines | | |
 |
Section bending machines
Section bending machines | | |
|
|
|
|
HOLTEC GmbH
|
|
 |
Log yard manipulation
- Feeding systems for logs and sections
- Separating cross conveyor
- Reducing systems
- Measuring systems appropriate for verification
- Crosscut stations as chain saw, tilting saw or as combination saw
- Metal detectors
- Optimisation systems
- Marking system | | |
 |
Package crosscut saw
- Mobile Saws
- Stationary package crosscut stations
- Strapping and compression device units
- Impregnating system | | |
 |
Wood products industry
- Complete log yards for particle boards, MDF- and OSB plants
- Feeding systems for chipper and mill systems
- Transportation systems of all typs
- Automatic control and visualisation | | |
|
|
|
|
Holz Schiller GmbH
|
|
 |
Entrance door friezes with laminated central layer
Entrance door friezes with laminated central layer
...special construction for highest strength and stability
Construction:
- outer layer 6,6 mm
- central layer laminated
- cross band:
24 mm continuous
or finger-jointed 50 cm+
Timber species:
spruce, pine, larch, oak, meranti, thermo beech, thermo spruce
Other timber species on request.
Your Holz Schiller advantages:
- Glueing with 1K-PU glue for sealed and weather-proof glued joints
- PU glue serves as a vapour barrier inside the frieze and can be machine processed
- Customer-oriented flexibility with special dimensions and your required species
- PU glue is heat resistant up to150ΓC
- Resistant against weak bases, acids and solvents
| | |
 |
Laminated beams
for conservatories and facades.
Certified by MPA Stuttgart with quality class BS 11, laminated according to DIN 1052 melamine glue, weather-proof and heat-proof, humidity 12 % +/- 2 %, only lamellaes in principle free of knots are laminated.
Structure:
- outer and central layers: 20-24 mm
- annual rings vertical grain
- surface planed
- chamfered on 4 sides
Timber species:
larch, spruce, oak*, meranti, pine
* not MPA certified
Applications:
- conservatories
- facades
- posts / bolt constructions
- interior finishing
| | |
 |
Sandwich filling panels
Insulation core material:
- PUR foam (WLG 025)
- EPS (WLG 040)
- XPS (WLG 040)
- cork (WLG 040)
- wood fibre (WLG 050)
Sound insulation core:
- Sonitus
- Hawaphon
Timber species:
Spruce, pine, Lärche, European oak, meranti*, okoume, sapeli, iroko/kambala, TMT-beech, TMT-spruce
* not PEFC-certified
Standard
- With 4 – 8 mm plywood for plain fillings
- Selected precious veneers
- Exclusive at Holz Schiller: veneers width-laminated with kaurit
| | |
|
|
|
|
Holzma-Plattenaufteiltechnik GmbH
|
|
 |
HPL 11
More performance thanks to automatic infeed
Expansion requires a panel-sizing saw with performance reserves and many options. Like the HPL 11.
With automatic infeed and high blade projection it is ideal for large quantities. | | |
 |
Panel dividing machines
HPP 230 – the Smallest Horizontal Beam Saw
The new HPP 230 combines power, reliability and functionality in the smallest of spaces. An innovation which will help you complete your customers’ orders quickly and efficiently. Even the standard version of the HPP 230 offers impressive state-of-the-art technologies. A lot of machine for little money. Optional extras allow it to be exploited to its full potential as and when the need arises. An investment that pays off!
compact price, compact size, genuine HOLZMA technology and quality
speed gives a competitive edge, shorter cutting cycles mean free capacity of personnel
numerous optional extras provide even greater efficiency | | |
 |
Panel dividing machines
The HPP Models of the 3 Series – Compact and Powerful
The basic model HPP 350 kicks off – the perfect solution for expanding carpenter shops or companies with small
batches. The proven basic model of the 3 series offers high performance in a compact design. The ideal solution for increasing requirements. | | |
 |
Profiline HPP 510
profiline HPP 510 – An "old hand" with plenty of experience
The HPP 510, forerunner of the new 5 Series, will remain available for some time because of its enormous popularity. Its appeal lies in its size and performance, its diversity of options and its operator-friendliness. | | |
|
|
|
|
Homag Holzbearbeitungssysteme AG
|
|
 |
Double end tenoner
Molding and planing machines | | |
 |
Edge banding machines
Edge-banding machine | | |
 |
Router Optimat BOF 200.
Router Optimat BOF 200. | | |
|
|
|
|
HOMBAK Maschinen- und Anlagenbau GmbH
|
|
 |
butt ends Equalisers
Cutting off the butt ends on the log yard for upgraded long timber of any lengths and strong crookedness.
Supply material:
Long timber of random lengths. The minimum length is 2.5 m. There is no maximal limit to log lengths. Log diameter CHD (chest height diameter) of 200 mm up to 1,200 mm.
Mode of operation:
The long timber can be introduced either lengthwise or crosswise and is centred by means of clamping devices. The hydraulically driven cutterhead approaches the log and circles it, while a scanning device copies the log approx. 1,200 mm from the log end. All salient wood parts are cut off in one single operating cycle. After the cutting operation the reduced log is removed again - either lengthwise or crosswise. The device for pre-cut timber designated MESR KH operates via log rotation, with the cutterhead swinging toward the log’s root base.
Features:
The cutting depth is variable. If desired, the cutterhead can be equipped with a polling disk. The reduction of the butt ends considerably reduces the risk of malfunctions and resulting idle times of the following machines. | | |
 |
drum chipper
Range of applications
The drum chipper is designed for the production of chips, the processing of residual wood and for the working up of wood wastes.
Supply material
Round timber, residual wood and wood wastes.
Mode of operation
The machine processes the a.m. supply material both continuously and economically.
Features
Excellent chips of the highest quality leave the machine due to its large drum diameter and the screening surface equipped with additional cutter bars. Specially toothed draw-in rollers with surface armouring safeguard both high service readiness and long service life. The counter knives are designed for multilateral use and can be regrinded. | | |
 |
Hammer Mill
The Hammer Mill was especially designed for the reduction of recycling wood of all kind. The produced
material can be used for further preparation or for boiler fuel.
Supply material
Pallets, crates, boxes, wood scrap, wood residues, bushes, branches, industrial wood waste etc.
Mode of operation
A vibrofeeder or an apron conveyor moves the infeed material towards the machine mouth. Bulky feed
material is hydraulically, continuously guided towards the rotor. In the rotor the material is pre-broken by
impact.
Features
The Hammer Mill is a very sturdy welded construction. The machine housing is divided in several parts and
the top can be opened hydraulically for easy change of the hammers, screen and counter knife.. | | |
 |
universal drum flaker
The universal drum flaker allows flaking of very different types of wood in a very economical and power-saving manner.
Supply material
Logs of random lengths, cores, slabs and edgings in bundles.
Mode of operation
This type of drum flaker works discontinuously.
Features
During the flaking operation the wood is safely fixed. The cutterhead is readily accessible. As soon as the clamping wedges have been depressed, the knives can be easily removed from the cutterhead – without any additional tools. This machine has proved its worth for the production of flakes with very narrow thickness tolerances and very low percentage of fines and splinters. | | |
|
|
|
|
Hommelwerke GmbH
|
|
 |
optical measurement
optical measurement | | |
 |
opticline
opticline | | |
 |
pneumatic measurement
pneumatic measurement | | |
 |
tactile measurement
tactilemeasurement | | |
 |
tester t500
tester t500 | | |
 |
tester t8000
tester t8000 | | |
|
|
|
|
Hoong-A Corporation
|
|
 |
Blister Packaging systems
Performance with extreme flexibility in economical price for small batch pharmaceutical and confectionary blister packaing | | |
|
|
|
|
Hoppeschliff GmbH & Co
|
|
 |
Circular knives
Circular knives | | |
 |
Machine knives
Machine knives | | |
 |
PVD coating services
PVD coating services | | |
 |
Special tools
Special tools | | |
|
|
|
|
HORN Glass Industries AG
|
|
 |
Heat Treating Furnaces and equipment
Heat Treating Furnaces and equipment, annealing_lehrs. | | |
|
|
|
|
Horst Witte Gerätebau Barskamp
|
|
 |
Alufix XL
It is possible to build accurate and especially economical large fixtures using Alufix XL. The main components are bars upto 10 metres long, couplings and connecting elements.
The system is available in sizes XL50 (barsare 50x50) and XL100 (bars are 100x100) and both are compatible with Alufix Classic. The profiles are only machined in the ball seats, which allow accurate and stable ball and seat connection as opposed to connections using holes in Alufix Classic. This offers our customers an economical alternative. | | |
|
|
|
|
HOSOKAWA ALPINE Aktiengesellschaft
|
|
 |
Blown film extrusion line
As a specialist in the design and manufacture of mono- and multi-layer blown film lines up to 7 layers HOSOKAWA ALPINE belongs to the global leaders in this market. Over fifty years of accumulated know-how in an innovation rich environment together with the highest quality standards form the basis for continued growth in this business segment. | | |
 |
Chemical Division
Wide range of process-technological solutions for the chemical industry as a single-source partner. Machines
and systems for processing basic chemicals. Advanced solutions for toner, paints, pigments, waxes and resins,
phosphates, herbicides, fertilisers, etc. | | |
 |
Granulator for plastic
ALPINE Granulators
Hosokawa Alpine supplies complete granulator systems for thermoplastic size reduction solutions and special know-how for in-house recycling of plastic films such as BOPP, BOPET and BOPA as well as recycling plants for rubber and cable scrap. | | |
 |
Minerals & Metals Division
Complete dry and wet processes with state-of-the-art mills and classifiers for minerals. Specific know-how for products in the plastics, paint and paper industry. | | |
 |
Pharma & Food Division
Market leadership for grinding, classifying and mixing of powdery products for pills, capsules, granules, infusion- and injection solutions. Machines and systems in accordance with all national and international Pharma standards. Customised solutions for the foodstuffs industry. | | |
 |
Recycling & Granulators
Design and manufacture of complete granulator systems for thermoplastic size reduction solutions.
Special know-how for in-house recycling of plastic films such as BOPP, BOPET and BOPA or recycling of rubber and cable scrap. | | |
|
|
|
|
HOYER GmbH - Multilog
|
|
 |
hoyer heated and insulated IBC
Our range of equipment includes heated and insulated IBCs. | | |
|
|
|
|
HSM GmbH + Co. KG
|
|
 |
Baling presses
Baling presses | | |
 |
Cardboard package maker machine
This multi-functional cardboard shredder standing device has rollers for mobile operation. It can turn bulky old cardboard of delivered goods into multi-functional packaging material at practically no cost | | |
 |
Crushing machines
Crushing machines | | |
 |
Refuse presses
Refuse presses | | |
 |
Waste disposal plants
Waste disposal plants | | |
|
|
|
|
Hyundai Heavy Industries Europe N.V.
|
|
 |
Compact loaders
Compact loaders | | |
 |
Crawler excavators
Crawler excavators | | |
 |
Forklift trucks
Forklift trucks | | |
 |
Wheel loaders.
Wheel loaders. | | |
|
|
|
|
H & T Produktionstechnologie GmbH
|
|
 |
Transfer Presses
The mass production of small, close tolerance drawn components requires high-precision manufacturing machines and short production times.
The process-tailored motion characteristics of the ram drive allows more than 300 strokes per minute. The presses cover the nominal press forces 250 kN, 320 kN and 500 kN. In addition, higher capacity pressing forces can be achieved with specially developed crank presses.
The ram strokes and transfer pitches are variable along the entire range of press sizes. A specially developed feed mechanism with an x- and y-directional motion allows precise positioning of the unworked material, which results in the optimal utilisation of materials.
| | |
|
|
|
|
Hankook Machine Tools Co. Ltd.
|
|
 |
Heavy Duty CNC Roll Lathe
-Automatic 2-speed geared head stock
-Extra wide one-piece cast iron bed
-Direct coupling type spindle motor
-Half carriage & two lamella type too post | | |
 |
Heavy Duty CNC Vertical Boring & Turning Mills
-High Quality Cast Iron Constructions
-Wide box type Guide way
-Full C-axis and Mill-spindle (VTC) | | |
 |
Heavy Duty Long Bed CNC Turning Lathe
Automatic 3-speed geared head stock
-Large spindle bore ?176mm(60B)
-Two heavy duty bi-directional turrets
-X/Z-axis manual hand wheels
| | |
 |
High Precision & Oil Country Lathe
-2 points support spindle
-Large spindle bore ?105/172mm
-Meehanite casting bed
-2-speed tailstock spindle
| | |
 |
Polishing machine
Polishing machine | | |
|
|
|
|
Hanovia
|
|
 |
STERILAIRE™ Room Air Sanitizers
Method of Operation
In STERILAIRE™ Room Air Sanitizers room air is drawn past washable electrostatic filters, then forced into an ultraviolet exposure chamber in which the air is subjected to powerful germicidal rays, past baffles and then reintroduced into the room.
The STERILAIRE Room Air Sanitizer provides effective germicidal treatment without the hazards associated with exposed ultraviolet lamps. Application of equipment is simple and straightforward. | | |
 |
Ultraviolet/Germicidal water purification systems
...provide a fast, unique way to disinfect water without heat or chemicals. Using short-wave radiation from Hanovia germicidal ultraviolet lamps, STERITRON purifiers destroy all water-borne microorganisms, including bacteria and viruses. Hanovia germicidal lamps are found in a variety of applications, including personnel protection and prevention and prevention of cross infection in hospitals, laboratories and veterinary facilities and product contamination prevention in the food processing, pharmaceutical, bottling, electronics and semiconductor industries. | | |
 |
UV curing system
UV curing system
| | |
 |
UV lamp reflector
UV lamp reflector | | |
|
|
|
|
Hans Hundegger Maschinenbau GmbH
|
|
 |
4-Sided Planer and Chamferer HM-D
Plane and chamfer timber (Fully-automated planing with automatic Timber-sizing)
from lattices to heavy timbers without setup, with automatic size control,
length measurement and prepositioning of all heads and in feed wheels.
| | |
 |
Fully Automated Joinery Machine K2i
Produce components (stacked lumber also!) without measurement, layout, or setup time. Cross Sections from 20 x 50 mm to 300 x 450 mm (625 / 900 mm). | | |
 |
Joinery machine K3i
The K3i is the high-performance variant of joinery machine K2i.
In order to enhance the speed of joinery machine K2i still further,
the high-speed version K3i was developed specifically for industrial
production (prefab industry, contract joinery etc.) -
With this new machine variant, while one component is being processed
in the machine zone, a third gripper wagon is already positioning
the next component on the saw, and the front sawing cuts are performed.
Using other additional units such as a newly developed double support,
or an independently operating ink marking system, it is possible to cut
cycle times by as much as half.
| | |
 |
Revolutionary Handling System!
Accurately process bowed and twisted timbers!
Process log home profiles with no special set-up ...
Process TJIs with no special set-up ...
Process round timbers with no special set-up ...
Accurately process stacked dimensional lumber ...
Technical support!
| | |
|
|
|
|
Hans Körber GmbH
|
|
 |
Metal pipe bends
Metal pipe bends | | |
 |
Tube connections
Tube connections | | |
|
|
|
|
Hans Weber Maschinenfabrik GmbH
|
|
 |
1000 neu
1000 neu | | |
 |
600
600 | | |
|
|
|
|
HANSA Öl- und Gas Brenner GmbH
|
|
 |
Gas burner – Series HPM
The HANSA Pre-Mix gas burner series are manufactured in three different sizes. The performance of the whole burner range reaches from 10-150 kW. | | |
 |
Oil and Gas Boilers – Boiler Unit for Oil and Gaz EBV
Equipment of Theta Version | | |
 |
Oil burner – Series HBV
Blue flame burner with oil nozzle preheater DropStop, recirculation combustion head flame tube 86mm | | |
|
|
|
|
hapfo GH-Tec Maschinenbau GmbH
|
|
 |
cnc wood lathes
cnc wood lathes | | |
|
|
|
|
Harald Böhl GmbH
|
|
 |
Chucking systems
Chucking systems | | |
|
|
|
|
Harburg-Freudenberger Maschinenbau GmbH
|
|
 |
extrusion lines.
extrusion lines for rubber & Plastic industry | | |
 |
laboratory internal mixers
laboratory internal mixers | | |
 |
screw press.
screw press. | | |
|
|
|
|
Hardinge Inc.
|
|
 |
drill tapping center
drill tapping center | | |
 |
high speed machining
high speed machining | | |
 |
milling horizontal maching centers
milling horizontal maching centers | | |
 |
turning products
turning products | | |
|
|
|
|
Harhues & Teufert GmbH
|
|
 |
actuators
actuators | | |
 |
linear guides for aluminium
linear guides for aluminium | | |
 |
profile rail linear guides
profile rail linear guides | | |
|
|
|
|
Harmonic Drive AG
|
|
 |
HFUC Series
The new HFUC Series component sets are a result of the continuous development of Harmonic Drive precision reduction gearing. In comparison with standard gears, the new HFUC series features a shortened Flexspline, which results in an important reduction of the axial length. The high performance IH tooth profile provides significantly increased torque capacity compared to gears incorporating the traditional involute gear tooth profile. | | |
 |
HPG Series
By using a flexible ring-gear the planetary gears achieve a backlash of < 1 minute of arc without requiring an additional backlash adjustment mechanism. Until now highly accurate gears and / or an additional adjustment mechanism were necessary to minimize backlash. Tight gear engagement for conventional planetary gears leads to torque ripple and a worsening of noise and wear characteristics. To avoid this problem the new HPG series features a flexible internally toothed ring-gear, thereby exploiting many years of Harmonic Drive experience with thin-walled components. The flexible ring-gear ensures that backlash is minimized and that all planet gears share the load equally | | |
|
|
|
|
Harrer & Kassen GmbH
|
|
 |
Consistency measurement
Consistency measurement | | |
 |
the moisture measurement instrument.
moisture measurement instrument. | | |
|
|
|
|
Handtmann A-Punkt Automation GmbH
|
|
 |
Profile Machining Centers PBZ
Modular designed the HSC centre fits your individual needs. Delivered as 4 or 5 axis centre you can reduce your production costs thanks to the two working zones allowing set up and machining at the same time.
The flexible clamping system from Handtmann allows nearly all profiles to be clamped. The moving portal, equipped with rack and pinion drives and guided on both sides achieves the accuracy required in the automotive or aerospace industry | | |
 |
Universal Machining Centers UBZ
Universal Machining Centers UBZ | | |
|
|
|
|
Hamworthy Combustion Engineering Ltd
|
|
 |
Dual fuel burner
Dual fuel burner | | |
 |
Exhaust gas burner
Exhaust gas burner
> 2 MW
| | |
 |
Flare stack
Flare Tips
- Pipe types (FN, FNS, FNH3)
- Steam-assisted (FC, FUS, FSX)
- Air-assisted (FAB, FAB MKII and MK III)
- Sonic (FSM Tulip, FSM Multibranch MKII and MK III)
- Offshore | | |
|
|
|
|
hamos GmbH
|
|
 |
colour sorters
Sea opto electronic colour sorters | | |
 |
electrostatic separators
electrostatic separators for metal separation | | |
|
|
|
|
H. Schreiner Test− und Sonderanlagen GmbH
|
|
 |
leak simulator
leak simulator | | |
 |
leak testers
leak testers. | | |
|
|
|
|
H.Folke Sandelin AB
|
|
 |
Cable Sheath Stripping Machine
The stripping machine was originally constructed for removing lead sheath after the vulcanisation process on Rubber Cable and Rubber Hose, but is now also commonly used by the cable industry. | | |
 |
Continuous Lead Extruder
The modern Hansson-Robertson Lead Extruder is comprised of several main components/units that are easy to connect and install.
Indeed we have had many customers over recent years that have installed commissioned equipment and trained personnel in as little as 3 weeks.
| | |
|
|
|
|
HAASE Energietechnik AG
|
|
 |
booster units
booster units | | |
 |
cogeneration plants
cogeneration plants | | |
 |
water processing plants
water processing plants | | |
|
|
|
|
Habasit AG
|
|
 |
Blister machine.
Habasit provide reliable and long-lasting belts with excellent price/value ratio for the driving and outfeed sections of your blister machine.
All products incorporate special feature |
|
