|
DYROS ApS
|
|
 |
Connector sleeves.
Dyros connector sleeves for repair of thread pipes are turned of brass or steel in sizes of 3/8” bis 2”.
All connector sleeves are supplied with stainless steel compression ring, stainless steel slide ring, and mould seals of EPDM rubber, which can endure temperatures
from -40 degr. to +140 degr. C. | | |
 |
Hose clamps.
Dyros hose clamps of electroplated steel or stainless steel are available in sizes
from 9 mm to 35 mm | | |
 |
Hose connector fittings
Dyros adapter pieces – hose connector fittings are all turned of solid brass with mould seals of nitril-rubber, suited for both water and oil.
Dyros adapter pieces are supplied chromium – plated.
Dyros hose connector fittings are supplied both of raw brass and nickel-plated. | | |
 |
Quick Connectors
Dyros quick connectors series 6 – 10 – 30 – 40 – 80 – 90 are specially developed for cooling fluids on plastic moulding tools and are to be found in all places, where small dimensions, trustworthiness and safety are appreciated. | | |
 |
Water hose connectors
Dyros water hose connectors series 100 – 2000 – 3000 with respectively 11 – 15 – 20 mm passing capacity are one of the most popular on the market, and are widely used in many places, f.inst. in plumbing installations, on high pressure scrubbers, on laundry machines, on garden hoses, in industry and by private consumers.
All connectors are turned of massive brass and chromium – plated.
Locking balls and – springs are of stainless steel, O-rings and thread packing of
Nitril-rubber, which is especially suited for water from -30 dgr. to +100 degr. C. | | |
|
|
|
|
DR. COLLIN GmbH
|
|
 |
table top compounders
table top compounders | | |
 |
table top platen presses
table top platen presses | | |
 |
table top roll mills
table top roll mills | | |
|
|
|
|
Dr. BOY GmbH & Co. KG
|
|
 |
BOY 12 A-M
The BOY 12 was specially designed and built for the manufacturing of micro-parts.
It is exceptionally compact and designed as a reliable small machine for continuous industrial duty.
The BOY 12 plasticizing units feed very small injection volumes of up to 0.1 cm³ with precision and repeatability.
Three plasticizing units are available with diameters of 12, 14, and 18 mm.
The BOY 12 is a fully controlled, hydraulic reciprocating screw injection moulding machine with a two-platen clamping unit. The clamping cylinders are integrated into the fixed platen. The clamping platen with linear guides, the special design for small moulds with precision centring of the clamping platens, specially designed feed openings, stainless steel hopper, a drawer for catching the micro parts and screw stroke recording with higher resolution are all examples of how the BOY 12 is optimally equipped for micro part manufacturing.
| | |
 |
BOY 22 A-M-D
This model has been produced since 1968 with the same basic technical design. To this day, more than 25.000 machines of this series were sold, with the machine concept being continously refined and the capacity increased. The BOY 22 has been perfected down to the last detail and excels through its high reliability and an extremely low machine hour rate.
This injection moulding machine is extremely compact and has a cantilevered clamping unit. The design is simple, organized, and ergonomic, with platen dimensions that are very generous. The injection unit can be optionally mounted vertically for parting-line injection.
The BOY 22 is available with three different controls:
• BOY 22 A with the high-end microprocessor Procan ALPHA control
• BOY 22 M with the mid-range Procan MD control
• BOY 22 D with the Dipronic control
| | |
|
|
|
|
Dornbusch Gravuren GmbH
|
|
 |
Embossing Plates
Embossing Plates are produced in large variety of sizes for an extemely extensive range of applications. First class skill and precision are crucial. | | |
 |
Hand Engarvers.
In spite of high technology, it is still necessary to utilise the highly skilled abilities of the Hand Engarvers | | |
 |
Production and engraving of Embossing Rollers
Production and engraving of Embossing Rollers of varying dimensions for numerous applications, requires a high degree of experience and skill. | | |
|
|
|
|
Dorit Fleischereimaschinen GmbH
|
|
 |
Pickle injector
Typical for all Pickle injectors produced by the Meat Processing Equipment Group DORIT/DFT, is an even brine distribution achieved by an ideal needle pattern.
Appropriate injection and brine filtering systems ensure injection success with all kinds of brine of different viscosities. On top of this, our pickle injectors are also userfriendly in operation, in maintenance and in cleaning.
Sturdy new pickle injector for automated industrial production
Rugged, heavy-duty stainless-steel construction throughout
Needle head of air-cushioned needles in 4.5 mm / 3.0 mm diameter with
3.0 mm / 2.0 mm injection tips, easy to remove and replace
For injection of bone-in and boneless products | | |
 |
Vacuum Tumbler
DORIT/DFT is able to supply a complete range of vacuum tumblers with a capacity from 20 to 10.000 litres, due to our long history of production in this field. Within our expansive range of equipment, we can offer the ideal unit for butcher, shops or restaurants and hotels, as well as units for medium and large industrial processors. Further technological alternatives available to our customers are our vacuum pressure- and cooling tumblers, which work either together as a double-jacket version with glycol or as units, injecting liquid nitrogen or carbon dioxide. This procedure guarantees an optimal protein extraction.
Advanced meat processing machine in rugged stainless steel construction for
industrial meat processing plants and other large-scale operations
Ideal for the massaging of cooked cured products, salt impregnation and
braising and in-depth salting of dry cured products; dry salting, seasoning
and marinating, game and goulash; mixing of salads. dressings and sauces;
tenderising of fresh meats; salting, seasoning and processing of fish and
seafood products
Horizontally rotating drum with 3-point support on solid frame
| | |
|
|
|
|
Doranova Oy
|
|
 |
doranova.
doranova. | | |
|
|
|
|
DONAU Werkzeugmaschinen GmbH & Co KG
|
|
 |
cnc rapid radial drilling machine
cnc rapid radial drilling machine | | |
 |
milling drilling center
milling drilling center | | |
|
|
|
|
DOMO Caproleuna GmbH
|
|
 |
floor coverings
DOMO® - one of the largest manufacturers of floor coverings - bases growth and innovation on their own production of high-quality chemicals and plastic intermediates. | | |
|
|
|
|
DOJATEC Sonermaschinen GmbH
|
|
 |
Eggwash systems
Eggwash systems | | |
 |
Fat Glazing systems
This part of our homepage gives you an overview of all the Fat Glazing systems we offer. Feel free to contact us for further informations and informations about special constructions | | |
 |
Glazing/Icing systems
Glazing/Icing systems | | |
 |
Special machines
This are just a few of the Special machines and constructions we have already built - to give you an short overview of possible solutions for special tasks. Feel free to contact us for further informations | | |
|
|
|
|
DOCERAM GmbH
|
|
 |
| | |
 |
DOCERAM
Ceramic centring pins
Locating pins
Change and base electrodes
Complete electrodes
Alignment pins
Gas nozzles
CAD/CAM blanks for dental application
Various ceramic parts for machinery equipment | | |
|
|
|
|
DoALL Sawing
|
|
 |
saw blades
Bi-Metal saw blades
| | |
|
|
|
|
DMH Maschinenhandel Deutschland GmbH
|
|
 |
CANDY PROCESSING MACHINES
Confectionery production and packaging lines
Complete lines and spezial machinery for manufacturing and processing of chocolate, cocoa, nuts
Mogul plants, Hardcandy lines, Starchless lines | | |
|
|
|
|
DMA Maschinen- und Anlagenbau GmbH & Co. KG
|
|
 |
conveying technology
conveying technology for the food industry | | |
|
|
|
|
DISKUS-WERKE Schleiftechnik GmbH
|
|
 |
grinding elements
grinding elements | | |
 |
horizontal spindle
horizontal spindle | | |
 |
Vertical spindles
Vertical spindles | | |
|
|
|
|
Diosna Dierks & Söhne GmbH
|
|
 |
Kneading Machines
Convincing mixing technique in dough-making | | |
 |
Mixing Plants
High economy with automatic dough-making | | |
 |
Rapidojet
The revolution in dough-making | | |
 |
Universal Mixer
Universal Mixer V 10 - V 200
Mixing, moistening, agglomerating and wet granulating | | |
|
|
|
|
Dinnissen BV
|
|
 |
Conveying equipment and systems
Our product manufacturing and process design activities are carried out in-house, thereby ensuring that we have maximum control of quality and delivery time. This also gives us added flexibility and ensures that we can always deliver on our agreements. | | |
 |
Feeding & Weighing
Filling and weighing Big-Bags and FIBCs in situations which are just a tad more complex? It should be reassuring to know that we already have experience in solving practically any kind of problem that can arise in the food, feed, pharma and chemical sectors. Efficiently and ergonomically. | | |
 |
Milling & Grinding
Grinding to the exact particle structure desired – quickly and efficiently – while minimizing energy consumption, product loss and contamination; mixing solid and liquid ingredients to obtain exactly the right composition, as homogeneously as possible and as flexibly as possible – by switching, combining and varying | | |
 |
Mixing & Processing
Dinnissen mixing systems for a wide range of materials – including powders, granules, and flakes – and for injecting and spraying on liquids have proven themselves in various industries. Our point of departure is always the quality required for the mixed product. | | |
|
|
|
|
Dietz & Rollwa Automation GmbH
|
|
 |
connectors
connectors | | |
 |
pipe fittings
pipe fittings | | |
|
|
|
|
Dr. Faulhaber, Fritz, GmbH & Co. KG
|
|
 |
Brushless DC Motors
Brushless motors are electronically commutated and have extremely long operational lifetimes
Consists of a brushless motor with integrated drive electronics
Feedback output available
No cogging
Dynamically balanced for extremely smooth performance
| | |
 |
Coreless DC Micromotors
Coreless rotor means no cogging or preferred rotor position
No iron losses
Extremely low current consumption
Low starting voltage
Low rotor inertia for extremely fast acceleration and braking
Extremely light and compact
Smooth and accurate speed, position, and torque control
Custom systems available from design to production
Higher power to volume than other DC motor technologies
High precision gearboxes available in all sizes
Feedback components available in all sizes
Control electronics available for all motor series
| | |
 |
Encoders
Integrated with the motor
Diameter matching the motor type
Extremely low current consumption
Extremely light and compact
Available in analog and incremental output
Easy to interface
Custom systems available from design to production
| | |
 |
smoovy® Miniature Drive Systems
No cogging or preferred rotor position
No iron losses
Extremely low current consumption
Extremely light and compact
Smooth and accurate speed, position, and torque control
Electronic commutation for extremely long operational lifetime
High precision gearboxes available in all sizes
Control electronics available for all motor series
Available as linear actuator
Custom systems available from design to production
| | |
|
|
|
|
|
|
 |
Encoders
Rotary encoders | | |
 |
Gauges
Length gauges | | |
 |
Measuring systems
Length measuring systems | | |
 |
Position indicators
Position indicators | | |
|
|
|
|
Dr. MÜLLER DIAMANTMETALL AG
|
|
 |
Diamond and CBN grinding wheels
Diamond and CBN grinding wheels | | |
 |
Diamond and CBN internal grinding wheels
Diamond and CBN internal grinding wheels | | |
 |
Diamond and CBN tools for the wood and plastic processing industry
tools for the wood and plastic processing industry | | |
|
|
|
|
Dynamis AB
|
|
 |
Industrial robots for measuring and testing
Industrial robots for measuring and testing | | |
 |
SensActive®.
3D-shape analysis with SensActive®.
Picks unsorted components directly from transport bins, pallets or counters.
Can negotiate both half and whole pallets.
Can even scan directly on a conveyor belt.
Not disturbed by ambient light.
Can analyze complex shapes and is height-independent.
Requires only a 3D-CAD model of the object, which we can help you construct.
Saves space and requires small floor space.
Is noiseless.
Allows advanced pattern laying directly onto pallets thanks to full object control.
Can be installed quickly, even in mobile settings.
Handles most materials, such as steel, plastic, castings and forgings, problem-free. | | |
|
|
|
|
Dyadic International
|
|
 |
dyadics fibrezyme LBL
dyadics fibrezyme LBL improves the efficiency of pulp bleaching | | |
|
|
|
|
DWT GmbH
|
|
 |
Boiler portable pipe beveling
BABCOCK has developed portable pipe beveling machines with the know-how of their own people on-site. DWT GmbH in Essen, Germany is the license manufacturer of Babcock portable pipe bevelers for weld preparation and orbital welding of pipes or boiler tubes as well as panel walls and delivers a unique product range worldwide | | |
 |
Handheld tyre inflator digital and precise
The ACCURA Unit is a robust yet sophisticated handheld electronic tyre inflator designed to break the mould of existing handheld tyre inflation. With leading electronics and sensor technology as well as patented software algorithms it offers fast, accurate and trouble-free tyre inflation and deflation.
- driven by the simplicity of use and clear display - fast inflation and deflation rates - high levels of speed, accuracy and safety - long product life - flexible usage - individual testing, exceeds EC Directive 86/217 Technical features: - Robust electronic design - Ceramic sensor - Clear and easy to read digital display - Modern, lightweight and shock resistant construction - Proprietary software increasing accuracy, fine metering and eliminating the chance of false readings - Direct valve design increasing inflation and deflation rates -Individually tested and certified
Also the AIRFORCE dial unit is designed for fast inflation and deflation rates and long product life - flexible usage - individual testing, exceeds EC Directive 86/217
Technical features: Clear and easy to read dial display - Modern, lightweight and shock resistant construction - Direct valve design increasing inflation and deflation rates -Individually tested and certified
| | |
|
|
|
|
DÜRR ECOCLEAN GmbH
|
|
 |
Cleaning
offers needs-based standard solutions and tailor-made systems for cleaning and burring work pieces, thereby covering the needs of the automotive industry, its suppliers and the diversified industrial market. | | |
 |
Industrial Fluid Filtration
offers the latest filter systems for the reliable, environmentally friendly and efficient processing and reconditioning of cooling lubricants and industrial liquids.
| | |
 |
Perfectly automated and interlinked processes
develops and produces systems fit for the future ensuring the flexible handling of work pieces. And more than that, this company division uses coordinated solutions to provide a smooth material flow and optimum interlinking of individual process steps in manufacturing.
| | |
|
|
|
|
Durocas GmbH
|
|
 |
filter tubes
filter tubes | | |
 |
assembly work
assembly work | | |
 |
filter cloths
filter cloths | | |
 |
filter elements
filter elements | | |
 |
industrial nonwovens
industrial nonwovens | | |
|
|
|
|
DURFERRIT GmbH
|
|
 |
Salt bath technology
Durferrit salts are used as salt melts within a temperature range of 150°C to 1300°C:
The extremely high heat storage capacity and the heat transfer properties of salt melts are used to good effect for the transfer of heat in chemical reactors in the chemical and rubber processing industries. These chemical reactors contain up to several 100 tons of salt.
In the rubber processing industries rubber profiles, among other products, are vulcanized in continuously operating plants.
Vulcanizing plant | | |
|
|
|
|
Durbal Vertriebsgesellschaft GmbH
|
|
 |
accessories
accessories | | |
 |
heavy-duty rod ends
heavy-duty rod ends | | |
|
|
|
|
Duravit AG
|
|
 |
bathtubs
bathtubs | | |
 |
bathroom furniture
bathroom furniture | | |
 |
lavatory bowls
lavatory bowls | | |
|
|
|
|
DuPont Performance Coatings GmbH & Co. KG
|
|
 |
Coresheet Varnishes.
The family of VOLTATEX® products offers a comprehensive range of core sheet varnishes with well defined characterictics
| | |
 |
Impregnating Resins
Impregnating Resins | | |
 |
Wire Enamels
Wire enamels from DuPont™ Herberts® Electro cover the complete spectrum of product requirements.
| | |
|
|
|
|
DUO PLAST AG
|
|
 |
Packaging materials
Cover sheets
Film packaging machines
Film packagings
Packaging films
Packaging materials
Packaging technology
Strapping machines | | |
|
|
|
|
Dulevo International S.p.a
|
|
 |
Street sweeper
5000 evolution
An efficient method of cleaning town and city centres, airports, docks and large industrial complexes that make an essential part of maintaining our environment. To realise this aim efficiently, a special type of cleaning system is necessary to deal with the many problems encountered.
| | |
 |
Street vacuum sweeper
COMMANDO
The Dulevo COMMANDO is a small-sized suction sweeper, which is particularly suited for working environments where the need for high productivity is combined with a requirement for enhanced maneuverability in tight spaces. The Commando%u2019s exceptionally high quality sweeping efficiency is achieved because of improved performance from a combination of innovations, the sweeping speed reaching 12 km/h, the larger than expected waste hopper volume, the extremely powerful suction turbine and the laterally moving rear sweeping unit. In order to satisfy the widest range of requirements, the Dulevo COMMANDO is available in the EURO 3 diesel version
| | |
 |
Street washing and disinfecting equipment
The DULEVO 200 and 5000 Hydro are machines particularly studied for high pressure washing and disinfecting of road surfaces and dealing with the many problems encountered in towns, city centres and large industrial complexes where hygiene is required.
The compact dimensions of these machines, plus a special four wheel steering system make these machines unique in their category, both in working autonomy as in manoeuvrability
Washing is made through a front spray bar positioned under the front part of the cabin, this can be adjusted hydraulically in angle of incidence, side angle, ground height.
The spray bar is built in stainless steel and is equipped with eleven vertical cone type spray units for frontal work and by two side units for working both on the left or right hand side of the machine.
Water is sent to the spray bar through a high water flow volumetric piston pump with pressure that can be regulated by a valve easily accessible and adjustable.
The water is withdrawn and filtered through a cartridge filter (with easy access for maintenance) from a stainless steel water tank placed on the rear part of the machine. | | |
 |
Waste compactor
This machine is manufactured on a Dulevo custom built four wheel steering chassis and has been designed and engineered to sustain a regular heavy work load. The 5000 Compatto is a unique machine for the collection, compacting and transportation of municipal solid waste. It can be use to load and compress waste, tip and empty trash bins and/or skips and quickly empty the vehicle's body into other trash compacters. The limited dimensions of the vehicle, together with the special four-wheel steering system allow a turning radius of less than 4.5 meters. This gives the vehicle unparalleled maneuverability making it ideally suited for use in congested the town centers. | | |
|
|
|
|
Düsterloh Fluidtechnik GmbH
|
|
 |
hydraulic and pneumatic drive systems
in the world of hydraulic and pneumatic drive systems -
the business field of DÜSTERLOH Fluidtechnik GmbH
| | |
|
|
|
|
DUCON TECHNOLOGIES INC.
|
|
 |
Activated carbon air filter
Activated Carbon Filter
Ducon Carbon Absorbers are custom designed to remove odor-causing components such as hydrogen sulfide, mercaptans, organic acids, aldeheydes, and ketones in various industrial and municipal applications. Single bed units are available for capacities up to 10,000 acfm. Dual bed units are utilized for higher capacities
| | |
 |
VOC ( volatile organic compound) treatment system
VOC Control Systems
Ducon supplies a complete line of VOC emissions control and solvent recovery systems. Ducon specializes in Activated Carbon DUVOC Adsorption Systems to remove/recover organic compounds and exhausts from chemical processing, coating, printing, electronics, metal cleaning and other operations.
Ducon offers modular systems from 500 CFM to 500,000 CFM. Ducon's CACR type and CASR type DUVOC systems are used to remove/recover the following compounds:
Benzene, Toluene, Xylene, Ketones, Alcohols, Phenols, Aliphatic, Aromatic and Halogenated organic Compounds, Esters, and other organics.
For highly concentrated streams Ducon provides catalyst based incineration systems. Please consult a Ducon engineer for your particular requirement.
| | |
 |
Wet and dry electrostatic precipitator
Wet Electrostatic Precipitators
Designed to achieve zero opacity and over 99.9% removal efficiency on particles down to 0.01 micron in size with 0.5 w.c. pressure drop.
Ducon also provides condensing type units for control of metal oxides.
| | |
 |
Wet scrubber
Dynamic Wet Scrubbers
TYPE UW-4 This Ducon Patented UW-4
Scrubber is a maintenance free unit, complete with integral wet fan, achieving high efficiency with medium pressure drop in applications involving heavy dust loads, and abrasive materials.
Applications:
Pulp &, Paper; Kraft Process
Black Liquor Recovery Boilers
Dissolving Tanks
Lime Kilns, Shakers & hydrators
Bark & Auxiliary Boilers
Evaporation Vents
Lime Sludge Kilns
Ore Dryers
Carbon Black Plants
Dyes Manufacture
Fertilizer Plants
Limestone Plants
| | |
|
|
|
|
Duall Division
|
|
 |
Dust collector
Dust collector
| | |
 |
Fume and gas wet scrubber
Fume and gas wet scrubber
| | |
 |
Odor scrubbing system
Odor scrubbing system
| | |
 |
Oil mist eliminator
Oil mist eliminator
| | |
|
|
|
|
Dropsa Spa
|
|
 |
Air /oil lubrication unit for spindle
Oil lubrication is a relatively new emergent lubrication system. The recent developments in lubricant technology have expanded air/oil lubrication to dry machining applications.
The air stream, that normally operates continuously, provides both a transport for the oil to the lubrication point and cooling.
The oil-injected into the air stream at regular intervals coats the surfaces to be lubricated and reduces friction and wear.
Dropsa offers many articulated solutions to Air/Oil Lubrication - the VIP4 Family of products is the latest addiction to this range. | | |
 |
Dry machining and tool lubrication unit
Used in a large range of application, total loss oil lubrication involves creating a thin oil-film between moving parts which is renewed at regular intervals by an automated lubrication system.
Dropsa has developed a wide range of standard electric, pneumatic and hydraulic pump packages suitable for oil loss systems. A custom service design is available to tailor pump packages to specific customer applications.
| | |
 |
Electric oil/grease lubrication pump Dropsa
Dropsa has developed a wide range of standard electric, pneumatic and hydraulic pump packages suitable for oil loss systems. A custom service design is available to tailor pump packages to specific customer applications.
| | |
 |
Pneumatic grease pump
wide field of application ranging from small machines such as woodworking machinery to large heavy industry such as steel plants or paper mills.
Dropsa provides an extensive line of equipment for grease lubrication and system monitoring. The most popular systems used for grease lubrication are Dual Line and Progressive Divider.
The modular design pioneered by Dropsa allows easy configuration and expandability of the system. Active components can be substituted during maintenance without the need to disrupt the interconnecting pipe-work. | | |
|
|
|
|
DREISTERN GmbH & Co. KG
|
|
 |
Cut-off machine
High performance cut-off units
You will obtain from us the most suitable cut-off units according to the profile or tubing form, material and line speeds.
Special merits: Outstanding cut-off quality and high cutting speeds. | | |
 |
Roll forming machine for medium size to heavy profiles
The P3 series has a eminant reputation among DREISTERN customers. The five models in the P3 series offer outstanding cost-effectiveness. Thanks to the numerous equipment variations, the right solution can be found for each requirement. According to the tooling changeover frequency, a suitable quick changeover system is put into action. | | |
 |
Roll forming machine for open profiles
The P3 series has a eminant reputation among DREISTERN customers. The five models in the P3 series offer outstanding cost-effectiveness. Thanks to the numerous equipment variations, the right solution can be found for each requirement. According to the tooling changeover frequency, a suitable quick changeover system is put into action. | | |
 |
Roll forming machine for thin-walled precision profiles
Frequent profile changeovers while maintaining the same high profile quality?
This is no problem for a P60/90. Thanks to a compact quick-change stand system, a tooling change can be carried out quickly. A precisely adjusted tooling stand is available for each particular profile. The advantage: No adjustments need to be carried out after tooling change. This type of machine is particularly popular with foam-filled roller shutter manufacturers, who appreciate the same high quality offered by this machine - even for difficult profile forms. | | |
|
|
|
|
Dienst Verpackungstechnik GmbH
|
|
 |
Horizontal cartoner machine HK L
HK-L: Standard machine for food and non-food industries
Sequence of operation:
Cartons are extracted from the magazine, using a rotary pick off head and placed into the moving carton transport chain. Product is then loaded into the carton, using a barrel loading device and the carton is then closed, using a series of reciprocating flap kickers and fixed guides.
| | |
 |
Horizontal cartoning machine HK III-ICS
HK III-ICS: Horizontal cartoner with integrated Individual Carrier System
Functional sequence
Cartons are extracted from the magazine, using a rotary pick off head and placed into the moving carton transport chain. Product arriving from the integrated ICS system, is then loaded into the carton automatically, using a barrel loading device and the carton is then closed, using a series of reciprocating flap kickers and fixed guides
| | |
|
|
|
|
Diemme S.P.A
|
|
 |
Filter press GHS
The GHT 4x4 is a filter press with high productivity. The filter plates, which are hung from the upper beam, are moved automatically by a rapid shifting device equipped with a carousel system which reduces the filter press opening and closing sequence to the minimum. Four hydraulic cylinders placed on the plate pack corners ensure perfect operation and limited structural stress, even in the most unfavourable working conditions. Effectively guarded moving parts and the use of state-of-the-art electronic interlock systems mean that the GHT 4x4 conforms to the highest operator health and safety regulations. Routine maintenance operations are simple, thanks to easy access to the filter plates, both for inspection and for filter cloth replacement.
Fixed header – 4 cylinders: the fixed header is made of a stainless steel “cellular” structure in order to best resist stress and it supports four (4) hydraulic jacks which are responsible for holding the plate pack closed.
Automatic cloth washing system: successful cloth cleaning using a robotic device ensures that optimum filtration rates are maintained.
Protection of the shifting device: The plate shifting mechanism, located inside the upper beam, is effectively protected from sludge, dust and corrosive chemicals by a continuous belt of rubber-lined cloth.
Anti-releasing device: the unique anti-releasing device prevents the simultaneous and premature plate pack release during the filter press opening and it allows a perfect and sequential cake discharge.
Carousel type plate shifting: the carousel plate shifting device assures quick and sequential plate movement by means of an automatic transport system controlled by an inverter.
Laser: a laser control system ensures correct plate pack alignment and stops the filter press in case of any anomaly so that any damage can be avoided.
Mobile hoist: a mobile hoist is provided to reduce downtime in the rare event of plate removal.
Optional open-filtrate-discharge plate pack: this is an alternative solution to the standard closed-filtrate-discharge system. It allows the visual monitoring of the filtrate quality through plates with external drainage ports equipped with cocks. The filtrate discharge from each plate is collected in a launder installed at the side of the plate pack running longitudinally.
| | |
 |
GHS filter press
The new GHS filter press has a strong and elegant design. Its refined push to close type upper beam structure ensures a better functional reliability in all working conditions making the access to the filter plates much easier. GHS is an automatic filter press where the plates, which are hung from the upper beam, are moved automatically by a rapid shifting device equipped with a carousel system which reduces the filter press opening and closing sequence to the minimum.
Automatic cloth washing system
Successful cloth cleaning using a robotic device ensures that optimum filtration rates are maintained.
Protection of the shifting device
The plate shifting mechanism, located inside the upper beam, is effectively protected from sludge, dust and corrosive chemicals by a continuous belt of rubber-lined cloth.
Anti-releasing device
The unique anti-releasing device prevents the simultaneous and premature plate pack release during the filter press opening and it allows a perfect and sequential cake discharge.
Carousel type plate shifting
The carousel plate shifting device assures quick and sequential plate movement by means of an automatic transport system controlled by an inverter.
Laser
A laser control system ensures correct plate pack alignment and stops the filter press in case of any anomaly so that any damage can be avoided.
Mobile hoist
A mobile hoist is provided to reduce downtime in the rare event of plate removal
| | |
|
|
|
|
Dieffenbacher GmbH + Co. KG
|
|
 |
CONFORM
The Widest Range of Spreading Systems Worldwide | | |
 |
GRADO
GRADO - Glue preparation systems, flexible and precise | | |
 |
Industrial energy supply and waste heat recovery
Industrial energy supply and waste heat recovery | | |
|
|
|
|
Döhler GmbH
|
|
 |
Beverage & dairy bases
Working closely with our partner company ALKO International B.V., the DöhlerGroup offers innovative ingredients for the beverage and dairy industry.
These include milk and cream based building blocks for cream liqueurs (e.g. chocolate or creamy fruit liqueurs) as well as milk, cream, yoghurt and soya bases for use in sophisticated recipes for non-alcoholic beverages such as smoothies. The latest ALKO technologies permit the permanently stable incorporation of milk, cream, yoghurt or soya into drinks of all kinds, providing consumers with a whole new taste experience.
Cream liqueur bases
Milk and cream bases
Yoghurt bases
Soya bases | | |
 |
Flavour solutions – the world of flavours
Flavour solutions – the world of flavours
The DöhlerGroup is your ideal partner for the world of flavours. Thanks to vertical integration and a deep raw-materials expertise, the DöhlerGroup has special and unique flavours such as citrus extracts and FTNF/FTNJ add-back flavours. Completing the range are natural flavours and flavours as well as extracts and specialities.
Matching an extremely high degree of creativity and experience with a thorough understanding of your production process guarantees the performance of the specially tailored flavour to your precise specification in the finished product!
Your flavour will be developed in close cooperation with our Market Research, Sensory Science and R&D departments.
| | |
 |
Fruit juice concentrates
Fruit juice concentrates – for Döhler, nature gives of its best
To be successful in high fruit content beverages demands a truly worldwide presence with global access to the very best raw materials. Working closely with its class leading partners the DöhlerGroup connects the world’s best raw material growing areas with state of the art, environmentally compatible production technology. Add to this industry best logistics and the customer has outstanding juice quality available on time whenever and wherever it’s required.
For us, quality starts with fruit cultivation. Döhler employees, with vast local experience, are on the spot to ensure that only the finest fruit is reserved for Döhler products and processed to our exacting specification. The result is top grade fruit juice and vegetable juice concentrates and purées of a consistently high quality unaffected by harvest variability.
The Oosterhout production site in the Netherlands is our centre of excellence for Döhler’s entire range of citrus and exotic fruits. From single fruit blends to standardised multifruit blends, from orange, grapefruit and pineapple to mango and papaya right through to the tropical umbu – Oosterhout produces the goods.
At our Dinter subsidiary in Neuenkirchen native fruits such as apples, pears, raspberries, red and black currants and cherries are processed to create specific products. Juice concentrates and natural juice flavours for juices and fruit splashes being the areas of core competence. All freshly picked fruit is processed immediately on arrival, essential to ensure best quality, exceptionally fruity, drinks.
| | |
|
|
|
|
Davik Self-Adhesive Tapes
|
|
 |
Double-Sided Tapes
DS 4101 - Double-Sided BOPP
Description:
BOPP carrier coated with high grade hot-melt pressure sensitive adhesive. Bi-siliconized paper interliner.
Features:
High adhesion. Excellent ageing.
Application:
Splicing. Lamination of difficult-to-stick surfaces. General purpose.
| | |
 |
Frontal DiaperTape
FT 922 - BOPP Frontal Diaper Tape
Description:
Printed smooth BOPP carrier. Hot-melt pressure sensitive adhesive. Good adhesion to polyethylene and non-woven fabric. Uniform release value.
Application:
Frontal part of closure system for disposable diapers.
| | |
 |
General Applications
CP 310 - Masking Tape
Description:
Crepe paper carrier. Low adhesion, pressure-sensitive adhesive.
Features:
Waterproof, excellent ageing.
Application:
General papers house hold and office uses.
| | |
 |
PrestoPrint - printable tapes
PrestoPrint - PP820 PP840 PP841 PP860 PP870 PP850
Description:
BOPP carrier coated with high grade, hot-melt, and pressure sensitive
adhesive. Pre-treated backing.
Features:
Printable under a wide range of conditions. Waterproof, high tack and
excellent ageing.
Applications:
One-step surface printing on commercially available adhesive tape
flexographic printing machines. Manual/automatic carton sealing
| | |
 |
Security Tapes
Security in Packaging: A Critical Concern in Today’s World
Packaging security ranks high among the pressing issues that stand before us today. Today’s packaging theft and counterfeit figures are staggering: the International Anti-Counterfeiting Coalition estimates that worldwide, annual retail loss runs in excess of $250 billion.
The Answer: Cutting-Edge Tamper Evident Security Tapes
Eliminate the worry over customers receiving bogus goods or no goods at all by using reliable, lab-tested, cutting-edge security tamper evident and authentication tapes that literally sign and seal shipments, produced by Davik's security tape division.
Davik is a cutting-edge manufacturer of security self-adhesive tapes, using different advanced technologies in order to develop reliable security tapes capable of signaling and/or identifying fraudulent products, including:
• The world’s first chipless RFID tape with (MR) Magnetic Resonance
applications
• The world’s first Optical Authentication Tape with distance reading
capabilities
• The world’s first patented, high quality Hot-Melt Tamper Evident Tape
with true box sealing capabilities, keeping boxes sealed and contents
safe
| | |
 |
Special Applications
LPT 9220 - Label Protection Tape
Description:
BOPP carrier coated with high grade Hot-Melt Pressure Sensitive Adhesive. High transparency.
Application:
For label cover and protection against mechanical and chemical damage.
| | |
|
|
|
|
DATRON-Electronic GmbH
|
|
 |
DATRON CNC Machining Centre
Productive and economical machining!
Datron’s affordable high-speed micro CNC machining centers are designed to reduce cycle time while improving your product quality, and your flexibility.
Heavy duty industrial construction, intuitive control, high-speed spindles, high-speed tooling, and a compact footprint make the Datron machining centers the ideal machines for a variety of applications. German engineered high-speed machining technology, together with our uncompromising attitude towards customer service, provides you with the edge to stay ahead of your competitors.
| | |
|
|
|
|
DATAPIXEL
|
|
 |
3D measuring arm
3D measuring arm | | |
 |
High resolution non-contact sensor for measuring machine CMM
High resolution non-contact sensor for measuring machine CMM | | |
 |
High speed 3D non-contact sensor for measuring machine.
High speed 3D non-contact sensor for measuring machine. | | |
 |
Non contact measurement for robot
Non contact measurement for robot | | |
 |
Non-contact non-destructive inspection system
Non-contact non-destructive inspection system | | |
|
|
|
|
DataLase Ltd
|
|
 |
CASEMARK™ Tape for Outer Case Marking
CASEMARK tape promises 40 minutes increased uptime per line per day!
Bar codes that do not fail!
No inks or ribbons!
Simple laser marking system!
High Quality Imaging Tape!
High Quality Case Coding!
The CASEMARK™ Tape solution combines a proprietary applicator with a laser based imaging station.
There are two major benefits of the CASEMARK™ Tape Solution:
| | |
 |
DataLase® CASEMARK™ Flexo
Mass Customization’ capability in the FMCG supply chain
Reduce Stock Keeping Units
Substantial cost savings compared with traditional printing and labelling solutions
High resolution image and barcode readability
No direct contact
Image is integral to the packaging
Available in chemical resistant, Tamper resistant and tamper evident format | | |
|
|
|
|
DARLEY B.V.
|
|
 |
Automatic Bending Machines
The newest offspring from our productrange is the Multifold bending automate. The product is fixed horizontally while folding beams can perform a positive or negative bending. In combination with the sheetclamp the product will be bended automaticaly. Through a flexible positioning of the tooling and complete automatic sheet infeed this machine is available from midsize to large series. Thanks to the easy to program control this is a easy to handle machine | | |
 |
Pressbrakes.
Innovative, fast, secure and reliable are just a few key-words related with Darley pressbrakes. Already during the 70's Darley was pioneer in case of the electronic hydraulical contol of the pressbeam by means of a closed control system. Still untill today we are trendsetter in sheetmetal-working solutions. Our ACS Angle Control System is a good example of dealing us with market-related questions. | | |
 |
Punch-cuttingmachines
Versatile and yet flexible. Thanks to the 6-stationed revolverhead, the Multi-Power is a suitable addition in processing especially thicker metalsheets. Also in this case the Multi-Power is only a standard version among our total range of customer solutions. Already several times we realized custom-made solutions with automatic tool-changing and automatic in- and outfeed of the sheetmetal or cupperplates by moving the Multi-Power in the Y- axis direction. It is also possible to combine the Multi-Power with plasmacutting- or drillinginstallations | | |
 |
Shears.
Darley shears are world-wide famous for their stability and heavy construction. This is the reason that they can be used in a wide range of applications. Ask about our solutions for special cutting-lines, with automatic pick-and-place and stacking-installations, sheet support systems and sheet-infeedsystems.
| | |
|
|
|
|
Danobat S. Coop
|
|
 |
cnc milling centres
cnc milling centres | | |
 |
Cylindrical grinding machines
Cylindrical grinding machines | | |
 |
Hacksawing machines.
Hacksawing machines. | | |
 |
Internal circular grinding machines.
Internal circular grinding machines. | | |
|
|
|
|
Danish Food Equipment Int. A/S
|
|
 |
baking ovens
baking ovens | | |
 |
bakery equipment
bakery equipment | | |
|
|
|
|
DANIEL SCHRAUBEN GmbH
|
|
 |
Fastening elements
Standardised fastening elements | | |
|
|
|
|
Danfoss A/S
|
|
 |
Danfoss Heating
Danfoss Heating is a leading company in the heating industry offering a wide range of components and solutions for generation, distribution and use of heat for comfort and energy savings in homes and buildings. | | |
 |
industrial Automation
Your one-stop partner for industrial control components and systems.
Through Danfoss Industrial Automation, you gain access to the entire Danfoss pool of technology, with a special focus on monitoring or control of pressure and temperature, and fluid control.
We take pride in the diversity of our markets, and we have a long tradition of serving some of the world's most demanding industries. Reliability, durability and innovation are therefore key ingredients in every product offering, improving your bottom line, too. | | |
 |
Refrigeration & Air Conditioning
Danfoss operates globally as a leading supplier of compressors and automated solutions to the refrigeration and air conditioning industry.
The Danfoss product range is among the most complete in the world. It is used within a number of business areas, such as household-, commercial-, food retail and industrial refrigeration as well as air conditioning, products for the wholesale refrigeration market and automation in various specific industrial sectors. | | |
 |
Water Controls
Valves and Flow Control Solutions | | |
|
|
|
|
DAN-LIST A/S
|
|
 |
Morsø automatic knife grinder
Enjoy your sharpening with our special knife grinder for knives used in Morsø mitring machines.
The knife grinder is supplied standard with:
| | |
 |
Morsø Model F mitring machine
Morsø Model F mitring machine cuts double mitre at 45° and single mitre up to 90°. Tenon, mortise joints, and a wide variety of angled cuts can also be made.
| | |
 |
Morsø Model Up-A frame assembler
The Morsø Model Up-A frame assembler is an automatic, pneumatic bench model, which is operated by two hand release and a pneumatic foot pedal. Therefore the Morsø Model Up-A is absolutely safe to operate. The Morsø Model Up-A has built in extension arms for supporting long mouldings. | | |
|
|
|
|
dama technologies ag
|
|
 |
Drill and universal grinding machine
Drill and universal grinding machine | | |
 |
Glass drilling machines
Glass drilling machines | | |
 |
Glass grinding machines
Glass grinding machines | | |
 |
Universal grinding machine
Universal grinding machine | | |
|
|
|
|
Dalmec GmbH
|
|
 |
Industrial manipulators with rigid arms
Pneumatic Manipulator PARTNER PM with articulated arms
PARTNER PM equipped with special gripping tools, is particularly suitable to manually handle, in a weightless condition, center and off-set loads in any direction. Thus enables the operator to work quickly, with precision and without fatigue, in excellent ergonomic and safety conditions. Its versatile structure also allows to fit in any working environment.
| | |
|
|
|
|
DALLIPAK GmbH
|
|
 |
Banding machines
banding machines | | |
 |
strapping machines
strapping machines | | |
|
|
|
|
Dae Hyun Hi-Tech
|
|
 |
case former
case former | | |
|
|
|
|
Dae Han Steel Strapping Co., Ltd.
|
|
 |
Strapping machine, banding machine
Strapping machine, banding machine
| | |
|
|
|
|
Dörries Scharmann Technologie GmbH
|
|
 |
CONTUMAT - VC - V
The VC-V series extends the double column design with an additional y-axis (3rd. linear axis) with a cast iron bed and hydrostatic guided base with main drive. | | |
 |
CONTUMAT - VCE
The single column type is a compact vibration-damped cast iron design with constant temperature distribution by a symmetrical gear and frame design. | | |
 |
ECOCUT
One of the highlights of the ECOCUT line is flexibility for different applications. According to this the ECOCUT can be equipped with a wide variety of different attachments. | | |
 |
FOGS
The FOGS line provides a new dimension in high speed milling especially for the tool and die industry. | | |
 |
RVU
The new RVU-grinding machine generation sets the pace in high-precision machining. It guarantees to provide a sustainable competitive edge. In the grinding sector, the product-line is especially suitable for high-precision machining in industries as e.g. bearing industry or aerospace sector, where extreme high accuracy are the basic demands | | |
 |
TVM
The TVM range of vertical lathes has been designed to attain maximum productivity in the machining of smaller high quality products. | | |
|
|
|
|
Düker, Fried. Wilh Eisenwerke GmbH & Co. KGaA
|
|
 |
Ductile cast iron flanged fittings
With our wide and varied range of fittings in accordance with DIN EN 545 we offer the most suitable solution for almost all applications, completed with our special fittings. | | |
 |
Ductile cast iron valves
The most important attributes of ductile cast iron pipeline systems are reliability and economic efficiency, as a result of permanent corrosion resistance.
But DÜKER ensures further corrosion protection with a range of coatings. Therefore our valves are available with enamel or epoxy lining and coating.
| | |
|
|
|
|
Düspohl Maschinenbau GmbH
|
|
 |
Edge Sander
Edge Sanders are available with single or double sided capabilities and equipped with sand, shape, foiling and coating units for the most challenging demands. | | |
 |
Finishing Systems
Coating Systems Delle Vedove offers a variety of easy to use machines for applying conventional as well as water-based or UV curable coatings. | | |
 |
Glue Systems.
We offer glue applicators for running sheet or roll materials and patented features to save time and material. | | |
 |
Profile Wrapping Technologies
Wrapping with paper, vinyl, foil, veneer, high and low pressure laminates, etc. | | |
|
|
|
|
DIAS Infrared GmbH
|
|
 |
Your Partner for Industrial Infrared Systems
Infrared Cameras.
Uncooled fixed and portable infrared cameras PYROVIEW and MIDAS for non-contact temperature measurement
Infrared Line Cameras
Uncooled fixed infrared line cameras PYROLINE for non-contact measurement of temperature profiles
Infrared Detectors
Pyroelectric single and multi-element detectors, linear arrays, and detector modules
Infrared Technology
Blackbody radiators, calibration service, R&D, technical consultancy
| | |
|
|
|
|
Diamant Metallplastic GmbH
|
|
 |
dichtol = impregnating, sealing
... of metals, alloys and other micro-porous materials.
Simply spray, brush or dip on the spot, no machinery or energy required.
Against hairline cracks and porosities from approx. 0 - 0.5 mm, without pressure, without vacuum, temperature resistant to -60/+500° C. | | |
 |
DWH = adjustment coatings to center, adjust, fix and optimize.
Best dampening properties and cost savings, for over 50 years approved in machine engineering.
Guide bushings, pin locations are firmly moulded in position, the stiffness of guideways is optimized, screw holes are closed, machine parts centered, construction groups are fixed and, and, and... all that without machining.
| | |
 |
plasticmetal = metal cosmetics, repair, cold welding
Rapid metal-repair-system with ex-cellent metal character & metal-like material properties:
to improve casting defects of any kind, to cold weld different materials within 15 minutes. Very flexible:
metal powder and hardener liquid are freely miscible = variable viscosity.
| | |
 |
ultrametal = metal repair, maintenance and protection......
... are executed with the polymermetal for worn, corroded or defective metal surfaces. Optimum for all metals:
long processing time, high mechanical and chemical resistance, excellent adhesion on all metals, also on oily surfaces.
Easy to process - also in fire- and explosion-endangered areas.
| | |
|
|
|
|
Deuzer Maschinenfabrik
|
|
 |
Beam Welding Machines
Beam Welding Machines (Plate Girder Machines)
Decades of experience as well as constant further development distinguish the sophisticated DEUMA Beam Welding Machines. Our production program ranges from low cost machines, in gantry-type design, up to continuous double welding lines with automated turn-over system – tailor-made to suit the specific requirement of our customers. The equipment is capable of welding I-beams of up to 20 m in lengths and more than 4 m web height.
Special travelling assembly units are provided which delete the necessity of previous tack-welding of the beams. Depending on the chosen design, both flanges and the web can be loaded at the same time and completely SAW or MAG welded. The continuous beam welding machines are equipped with straightening units which correct any distortion on the beams caused by the welding process.
In addition, our range includes beam welding machines capable of handling and welding tapered beams
| | |
 |
Deuma Circumferential Seam Welding Machines
Deuma Circumferential Seam Welding Machines are built in many different versions, for small and large vessels as well as for pipes. All normal welding
processes, such as Submerged Arc, MIG-MAG or WIG can be used. The Circumferential Seam Welding Machines can be supplied with suitable
Clamping Systems and Loading Systems. | | |
 |
DEUMA Column & Booms (Manipulators)
Turning/Tiling Tables often have to work under severe conditions! DEUMA Turning/Tilting Tables are therefore of extremely robust construction.
In addition they are absolutely safe and efficientl. The Machine Posts are made from high quality steel in distortion-free welded construction.
The Faceplates are made from steel. | | |
 |
DEUMA Turning & Tilting Tables and Positioners
Turning/Tiling Tables often have to work under severe conditions! DEUMA Turning/Tilting Tables are therefore of extremely robust construction.
In addition they are absolutely safe and efficientl. The Machine Posts are made from high quality steel in distortion-free welded construction.
The Faceplates are made from steel. | | |
|
|
|
|
Dettmer Verpackungen GmbH
|
|
 |
Baker´s ware and pasta
The requirements to the packagings for these goods can be as different as their products themselves.
Therefore it is very important that the films necessary for the packing have a good machine running and excellent sealing characters because by this a respective high packaging speed can be achieved. Furthermore they should effectively protect the product or have it preserved for a certain period.
Additionally finished by means of our high-quality flexo print this packaging becomes "eyecatcher" in shelf and freezer.
Success is preprogrammed!
| | |
 |
Fish and sea fruits
Concerning packagings for these products the "quality measure rod" is laid on high level.
Specially the film has to fulfil a particular roll in this product range and therefore it is a sensitive part of the complete packaging. Thinking of sharp-edged, frozen filets or scampi this can be recognized!
Furthermore it goes without saying that just these packagings experience a finishing grade by use of laminated films and high-quality flexo-print technology which will be hard to exceed!
With us you are in the "right" hands!
| | |
 |
Ready-to-serve meals
In this industry an enormously high-quality standard for products and packagings has been developed within the last years which can only be described with the word „top quality“.
Being able to produce the high-quality packaging creations stipulated here the combination out of innovative colleagues and state-of-the-art production lines are just good enough!
Dettmer Verpackungen GmbH – We accomplish customer wishes à la carte!
Our production facilities can offer you nearly all possibilities required by the latest „convenience trends“.
| | |
 |
Sweets, snacks and cerials
Just in this industry the high-quality flexo print has well set up in the meantime and will gain further ground also in future!
This development is supported by the continuous development of the printing technique and offers in combination with corresponding combinations. New possibilities for excellent packaging designs.
State-of-the-art technology!
| | |
|
|
|
|
Desma GmbH
|
|
 |
automation.
automation. | | |
 |
machines
machines | | |
|
|
|
|
Demag Cranes & Components GmbH
|
|
 |
cranes
cranes | | |
|
|
|
|
Delphin Water Systems GmbH & Co. KG
|
|
 |
Container wastewater treatment systems
container wastewater treatment systems | | |
 |
industrial water treatment plants
industrial water treatment plants | | |
 |
rainwater collectors
rainwater collectors | | |
 |
rainwater utilization plants
rainwater utilization plants | | |
|
|
|
|
Dellner Tools AB
|
|
 |
Hydraulic Chuck
Hydraulic Chuck | | |
|
|
|
|
Dellner Dampers AB
|
|
 |
Dampers
Dampers for railways
Primary and secondary suspension
| | |
 |
Roll damper
Roll damper (in between cars, 2 m long); | | |
|
|
|
|
DEKOMTE de Temple Kompensator-Technik GmbH
|
|
 |
corrugated hoses
corrugated hoses | | |
 |
expansion joints
expansion joints | | |
|
|
|
|
Degussa AG
|
|
 |
Catalysts
Custom Design Catalysts Solutions | | |
|
|
|
|
DECKEL MICHAEL GmbH
|
|
 |
Centering testers
Quick and precise setting
Centering testers are indispensable aids in demanding tool and mould making, in the test workshop, in prototype making, or in the precision shop. With the "Centricator" from Deckel, you can centre the work spindle of your machine tool over holes or journals, position workpiece corners using the edge finder, or align workpiece surfaces vertically to the spindle. | | |
 |
CNC tool grinding machines
With the FLEXUS, Deckel is launching a revolution in versatility, productivity and quality in tool production. Wherever high versatility with a high degree of automation is desired, the FLEXUS will show you what it can do – and even reduce nonproductive times.
So, for example, deburring, polishing, drilling or milling will be possible in parallel with tool grinding – and any other operation can be added to this variety, exactly to the customer‘s needs, including assembling, measuring and cleaning functions | | |
 |
Manual tool grinding machines
S11speed - for high-precision special tools
Amazingly fast, economic and flexible production of single tools and small lots - that's exactly what we have designed the S11speed for. | | |
|
|
|
|
Debatin GmbH, Anton
|
|
 |
Plastic Carrier bags
Plastic Carrier bags | | |
|
|
|
|
DEAN SMITH & GRACE LTD
|
|
 |
2000 Series
2000 Series | | |
 |
3000 Series
3000 Series | | |
 |
4000 Series
4000 Series | | |
 |
5000 Series
5000 Series | | |
|
|
|
|
DE-STA-CO Europe GmbH
|
|
 |
Pull Action Latch Clamps
Pull Action Latch Clamps
| | |
 |
Squeeze Action Clamps
325 - Squeeze Action Clamp
Designed for attachment by welding the front or the top of the base to a container or a cover
800 lb. Capacity
Jaw moves 90 degrees to swing completely out of the way
Stainless steel models available
Ergonomic handle grip supplied | | |
|
|
|
|
DBK David + Baader GmbH
|
|
 |
High temperature furnaces.
High temperature furnaces. | | |
|
|
|
|
DADCO Diebolt GmbH
|
|
 |
Nitrogen Gas Springs
Nitrogen Gas Springs | | |
|
|
|
