|
VACCARI SPA
|
|
 |
screw-presses
screw-presses | | |
|
|
|
|
VIS International GmbH
|
|
 |
We provide a broad range of specific and taylor-made solutions to meet the requirements of our clients, such as
+ Financial consulting: BOT, TOT, Public Private Partnership, etc.
+ Small scale waste water treatment (4 to 2000 PE): Aquamax®
+ Medium scale waste water treatment (2000 to 10.000 PE)
+ Arsenic removal from drinking water: Ferrosorp ®
+ Plant engineering and manufacturing
| | |
|
|
|
|
VISCOM AG
|
|
 |
MX100IR
Automatic, high accuracy desktop wafer inspection | | |
 |
QFP solder defect
Inspection of Solder Joints on Electric Assemblies
The inspection of faulty solder joints is the chief assignment area for Viscom inspection systems. Defects that frequently arise during production are, for example:
open solder joints
solder bridges
components with too little or too much solder
lifted leads
missing or displaced components. | | |
|
|
|
|
VISION ENGINEERING LTD
|
|
 |
pioneering optical and video non-contact measuring microscopes
Vision Engineering's Kestrel 200 optical measuring microscope provides fast and accurate 2-axis measurement of precision component parts.
From simple manual, single-feature operation to more complex component part measurement, Kestrel 200 combines high resolution, high contrast optical images with an intuitive microprocessor to deliver accuracy and simplicity for a wide range of measuring applications. The superior optical image of Kestrel even allows difficult-to-view features to be measured on low contrast components, such as black or transparent plastics. | | |
|
|
|
|
VMI-AZ EXTRUSION GmbH
|
|
 |
Rubber Extruders
Rubber Extruders | | |
|
|
|
|
VOC Technology
|
|
 |
Biofilter
An environmentally friendly and cost effective purification method for low concentrations of biodegradable pollutants.
Typical removal efficiency is > 80% | | |
 |
Swingtherm
A highly efficient air purification system for VOC emissions that require high levels of purification and low energy consumption. Normally a removal efficiency of 96-98% can be achieved. | | |
 |
VOC Concentrator
A system that purifies extremely low VOC concentrations in large air flows at
a reasonable operating cost. | | |
|
|
|
|
Vogelbusch GmbH
|
|
 |
alcohol technology.
alcohol technology. | | |
|
|
|
|
VOLLMER WERKE Maschinenfabrik GmbH
|
|
 |
sharpening machines
sharpening machines | | |
 |
tipping machine
tipping machine | | |
|
|
|
|
Volvo Aero Corporation
|
|
 |
turbines
industrial and marine gas turbines | | |
|
|
|
|
Voortman Automatisering
|
|
 |
CNC drilling system
V600 Drilling System
The V600 drilling system is suitable for structural steel fabricators with a limited floor space. The operator loads the drilling table with several profiles behind each other, after which the horizontal drilling unit provides one or more profiles with the programmed hole pattern. By drilling holes through both flanges/sides or by rotating a profile it is possible to drill the material on all sides. Besides drilling the machine can also carry out thread tapping. A vertical hydraulic clamp, which clamps the product to the table during drilling, is fixed at the front of the drilling cabin. For tool changing, the drilling unit is provided with an automatic tool changers. After replacing a drill the length of the new tool is automatically measured and before starting the drilling process the web and flange height will be measured automatically. The holes in the flanges can be positioned with regard to the centre of the measured flange height or the actual web height | | |
 |
Drilling center
For the V603M, V613M and V630M drilling system the positioning of a profile is carried out by a machine integrated feeder rolls positioning system.
Both, the V603M as well as the V630M, are executed with one vertical and two horizontal servo-controlled drilling units. Therefore profiles can be drilled simultaneously in both flanges and in the web. With the rotating drilling unit of the V613M profiles can be drilled vertically as well as horizontally. This system can operate independently for long periods due to the automatic tool changers.
Combine with other systems
The drilling systems can be combined with a horizontal bandsawing machine, a hydraulic numbering machine and/or a beam coping system. For further automation of the pre-fabrication a Voortman shot blaster can be added to the production line. Therefore one operator can centrally control all these machines for drilling, sawing and shot blasting.
Software
Each drilling system is provided with a computer control, which can be integrated in the company’s network, so that DSTV- and DSTV+-data can be directly downloaded, from system files within the company database, to the drilling system. Also software to compose production batches will be installed. | | |
 |
Horizontal band saw
Horizontal band saw
< 1 550 mm
Voortman has developed five models of band sawing machines especially for sawing structural steel. Four sawing machines are developed for mitre cutting. The fifth is designed for straight cutting of profiles. The sawing machines are equipped with a control system for the selection of the mitre angle and the automatic sawing cycle.
The band speed is frequency controlled and the feed rate is automatically controlled to suit the profile type and size.
The sawing machines can be combined with a length measuring system with stop truck. The sawing machine can also be combined with a drilling system for sawing and drilling in one continuous process.
These sawing machines are available with different cutting capacities. The VB600 for sawing max. 450 x 620 mm, the VB750 for 450 x 750 mm, the VB1050 for 500 x 1.130 mm and the VB1250 for 600 x 1 250 mm.
| | |
 |
Punching-shearing machine
The Voortman punching and shearing lines are mainly used by structural steel fabricators producing plates, fittings and angle steel parts.
The punching and shearing lines are equipped with as standard a punching unit with four punches and a flat steel shear with +/- 45º mitre cutting.
As additional extras the production line can be provided with an angle steel shear, a horizontal punching machine, a numbering unit and a drilling unit coupled with many other optional extras.
For the automatic processing of angles used in the manufacture of electrical transmission towers, diagonal trusses and connecting angle braces Voortman developed the angle line. The basic machine consists of two hydraulic punching machines and a hydraulic angle steel shear. Several options, such as a numbering unit can be added to the system. | | |
|
|
|
|
Vopelius Chemie AG
|
|
 |
VOPCROM 750
Under the brand name VOPCROM® 750, Vopelius Chemie AG offers a complete system for the supply of chromic acid in liquid form that allows clients, whether large or small, to use chromic acid safely, efficiently and without any dust load. | | |
 |
Vopcrom DSA
A hard chrome procedure of the third generation.
...
High current efficiency (18-25%)...
Low anode corrosion ...
No etching on steel and steel alloys.
...
Bright deposits with good leveling.
...
High deposit speed compared with standard process
Good corrosion protection and wear resistance of the layer.
Good micro cracking qualities (approx. 300 - 800 cracks/cm).
Bright, hard chrome layers (approx. 800 – 1100 HV)....
The hard chrome process for the future
| | |
|
|
|
|
Vötsch Industrietechnik GmbH Environmental simulation
|
|
 |
Humidity and temperature test chamber
Temperature Test Chambers VT³
und Climatic Test Chambers VC³
If you are looking for top quality and unmatched performance, then Vötsch has just what you need | | |
 |
Infrared oven
Infrared oven VTIR 65/40-200°C
Industry:
Electronics industry
Application:
Burn in of coatings | | |
 |
Temperature test chamber
Temperature Test Chambers 110/200 l
for the laboratory
VT 4011, VT 7011, VT 4021, VT 7021
| | |
|
|
|
|
VTC Elastoteknik AB
|
|
 |
Appliances and Domestic
Application Areas
Domestic articles, household goods, castor wheels, toys, bottle stops, vacuum cleaner seals, horse shoes, power tools, hand tools, sanitary seals, door stops and wedges, beer barrel bungs, toothbrushes, beer crate handles, and outdoor all-year-round applications | | |
 |
Automotive
Application Areas
Interior: stowage consoles, cup-holders, floor-well mats, grips/handles, buttons, seat adjusters, grommets, profiles, pedal covers, facia mats, ignition lock surrounds and soft touch arm rests.
Exterior: mud flaps, roof rack feet, wheel arch liners, tread mats, side steps, bumpers, door seals, under floor air deflectors and stone chip protectors.
Under the hood: air ducts, radiator air ducts, radiator grill edges and shield seals. | | |
|
|
|
|
VTD VAKUUMTECHNIK DRESDEN GmbH
|
|
 |
Plastic Industry technology
Functional hard material coating | | |
|
|
|
|
VIPA GmbH
|
|
 |
Automation components
Automation components | | |
 |
Automation solutions
Automation solutions | | |
 |
Control terminals.
Control terminals. | | |
 |
Industrial central processing units (CPU)
Industrial central processing units (CPU). | | |
 |
Programmable logic controllers
Programmable logic controllers | | |
|
|
|
|
VFK Head Corp.
|
|
 |
Plastic technology
Machinery and equipment for the plastics and rubber industries | | |
|
|
|
|
Vacon Oy
|
|
 |
Vacon NXL
Easy to plug, and easiest to play
The Vacon NXL is a powerful and compact AC drive for industrial and residential purposes in the power range from 0.25 to 30 kW.
The space-saving bookshelf design with high protection classes, versatile control and programming capabilities offer an optimal solution for all operating environments. Installation, connection and commissioning procedures are extremely quick and convenient with instructions attached to the unit.
| | |
 |
Vacon NXL
Compact general purpose | | |
|
|
|
|
VAIREX Corporation
|
|
 |
AIR MANAGEMENT SYSTEMS
AIR MANAGEMENT SYSTEMS FOR FUEL CELL APPLICATIONS | | |
|
|
|
|
VALUTEC OY
|
|
 |
2-zone OTC progressive kiln
2-zone OTC progressive kiln | | |
 |
E-cart charged batch kiln.
E-cart charged batch kiln. | | |
 |
Truck-charged batch kiln
Truck-charged batch kiln | | |
|
|
|
|
Van Aarsen Rubber Technology BV
|
|
 |
Main Grinder.
The second step in the VAN AARSEN RUBBER TECHNOLOGY process is the RTG 800 /1250 main grinder. Main Grinding is an ”ambient” mechanical process and is a grinding and not a cutting treatment. The tyre shreds are crushed between toothed rotor and stator tools. The shreds include the steel wires from the beads, which are of help during the grinding process. The toothed tools are grinding tools, hence they do not necessary need to be sharp.
In just this single step the size of the shreds is reduced from (100*150 mm) to a granulate of 0-20 mm of which already 20 % is less then 2,0 mm due to the special design of the machine which is unique in the market. Another benefit of this unique design is that over 96 % of the steel is liberated during this process.
The grinding temperature of approx. 80 degrees Celsius is maintained by adding process water in the main grinder. The water added into the man grinder evaporates during the grinding process and is cleaned in a wet-filter to remove the dust before it is released to the environment.
The ground rubber with the liberated steel wires is transported via a vibration conveyor. The steel is separated from the rubber by several magnets. The separated clean steel is led via belt conveyors to containers outside the production building. The clean steel without rubber is ready for sales.
The ground rubber and fiber mixture is pneumatically transported to the primary screening machine and separated in 3 different grades. In this example we take 0-2 mm, 2-4 mm and 4-20 mm.
The fibers in the rubber are separated in the primary sieving machine and pneumatically transported to the central dust aspiration. | | |
 |
Single Rotor Shredder
The first step in the VAN AARSEN RUBBER TECHNOLOGY process is the SRS 1300/1300 S shredder. Shredding is an ambient mechanical process. The whole tyres including the beads are cut into pieces with a size of approximately 100 x 150 mm. In the shredder, water is added as a lubricant as well as for cooling and dust preventive. The used water goes into a settling tank. The clarified water leaves via the overflow into the sewer. What remains is settled street-dirt (sand ,stones, glass).
After the shredder the intermediate stock could be situated. This intermediate stock enables you to keep processing when the knives of the shredder have to be replaced. The shreds are fed into the main grinder with the intake dosing hopper with rotating scraper. | | |
|
|
|
|
VAN HEES GmbH
|
|
 |
Boiled sausage
Manufacturing high-quality boiled sausage is a question of protein breakdown, curing colour, microbiological stability and full taste. Only an ideal combination of raw-material selection, manufacturing technology and processing additives used will result in top-quality products. We at VAN HEES provide you with an opportunity of meeting the highest expectations with our technological know-how and top-quality products. | | |
 |
Grill sausage
Grill sausage or Bratwurst, whether coarse or fine, is one of Germany’s most popular sausage types. Heavy demands are placed on texture and taste. Grill sausage is a very sensitive product, and keeping the sausage fresh is of paramount importance. VAN HEES offers a broad product range for the grill-sausage sector | | |
 |
Meat refinement
Convenience products are part of the standard range in any butcher’s shop. Refining meat to a delicacy is both a delight to customers and a highly profitable product segment for the butcher. The quality of the final meat speciality is dependent on ideal meat preparation. Rely on VAN HEES for best results! | | |
 |
Raw Ham
Raw ham is one of those delicacies you would expect to find in any butcher’s shop in Europe. Compliance with a large range of quality criteria is necessary in producing ham products with good sensory qualities and long shelf life. VAN HEES products made especially for raw-cured goods represent top technology, maximum product safety and unmistakably good taste. | | |
|
|
|
|
VARO Process Equipment
|
|
 |
horizontal processing tank
horizontal processing tank | | |
|
|
|
|
Varpe
|
|
 |
Compact checkweigher for in-line monitoring
The model DCI-40 has been conceived to address the market's need for a unit that allows flexibility of application, easy installation and worry-free startup.
The unit is totally modular by design. It incorporates simple systems for both fine tuning the working height level and quickly changing and/or replacing the conveyor belts. It incorporates a graphic display, easy-access control panel and simple menus from which the operator can quickly set the weight parameters | | |
 |
X-ray inspection machine
The RETINAMATIC 2000 equipments are in use for the detection in real time of foreign contaminants as stones, metals, glasses, plastic, etc. In already stiff products or bulk productions with judging sensibilities that can come to 0.5mm (diameter of sphere) depending on the characteristics of the product (density of the same one).
The area of industrial application is indicated for the sectors of food: conserve, pre-coocking, frozen, 4th range, etc.), pharmaceutical, cosmetic, detergents, aerosols, etc...
This equipments allow to inspect different formats of products presentations: groups inside box, bags and metallized trays, carton, tin, etc., covering a great variety of widths and heights of product configurables. | | |
|
|
|
|
Vötsch Industrietechnik GmbH Umweltsimulation
|
|
 |
stability tests
stability tests | | |
 |
test technology
environmental simulation test technology | | |
|
|
|
|
Vecoplan Maschinenfabrik GmbH & Co KG
|
|
 |
trommelhacker
trommelhacker | | |
 |
zerkleinerer
zerkleinerer | | |
|
|
|
|
VEMAG Maschinenbau GmbH
|
|
 |
Convenience
VEMAG Convenience System
Automatic filling flow divider 803
Diaphragm 821
Filling head 981
Coex 891
Coex 892
Coex 893
Coex 894
Forming machine 250
Kebab line 703
| | |
 |
Grinding systems
Sausage grinder 980
Separation grinder 982
Separation grinder 982 for poultry
Minced meat portionier MMP 220
Minced meat attachment 801
Separation attachment 801
Automatic separation valve
| | |
 |
Sausage lines
Casing holding device DHV 841
Casing holding device DHV 937
Length portioning device LPV 802
Length portioning machine LPG 202
Casing magazine 206
Cutting machine TM 203
Hanging machine AH 204
Casing applier 804
| | |
 |
Vacuum fillers.
ROBOT 500
ROBBY / ROBBY-2
ROBOT HP E-series
ROBOT HP25E
ROBOT DP12C
ROBOT DP C-series
Portioning computer with graphical user interface
VEMAG Online net
Vacuum hopper 149
VEMAG tool trolley
| | |
|
|
|
|
Venjakob Maschinenbau GmbH & Co. KG
|
|
 |
Finishing lines
VEN SPRAY PIPE
Steelpipe spray coating machine With UV-curing
Powerful convinces this especially designed plant technology for the application of a temporary corrosion protection on round steel pipes
| | |
 |
Pretreatment
Dust removal & ionisation
The predominant number of plastic materials used today has a very strong tendency to build-up electrostatic surface charges. This complicates the coating process. The use of ionisation devices makes it possible to neutralise surfaces. | | |
|
|
|
|
Vestas aircoil A/S
|
|
 |
aircoils
aircoils | | |
 |
compact coole
compact coole | | |
|
|
|
|
Vetter GmbH
|
|
 |
Leak Sealing Bags
Leak Sealing Program - Leak Sealing Bags | | |
 |
Gully Sealing Bags
Gully Sealing Bags | | |
 |
Pipe and Test Sealing Bags
Pipe and Test Sealing Bags | | |
|
|
|
|
VUM GmbH
|
|
 |
Gas scrubbers
Gas scrubbers | | |
|
|
|
|
Vitro Laser GmbH
|
|
 |
Customized products
Optimal laser systems for individual requirements.
Proximity to customers and customer-orientated products – phrases? Not for Vitro Laser! | | |
 |
Laser systems for flexible glass processing.
The VITROLUX-C v.3 from Vitro Laser GmbH is the ideal link between single-part and small mass production. This mobile system ensures a maximum of flexibility for the place of installation. | | |
 |
OEM solutions
As specialist for subsurface engravings, we manufacture reliable laser heads as in-house production.
The technology is applied in many areas and forms. Beside of these complete laser systems we supply our customers with OEM solutions for individual conversion.
Vitro Laser GmbH supports your progress. | | |
 |
VITROLUX-MC v.2
The VITROLUX-MC v.2 guarantees high speed of operation, precision and outstanding results at the laser subsurface engraving of glass objects. | | |
 |
Vitrolux-UC v.3
Laser technology for flexible treatment of glasses. The VITROLUX-UC v.3 of the Vitro laser GmbH is particularly suitable for mobile employments on fairs and other events.
| | |
 |
VITROLUX-V v.1
The VITROLUX-V v.1 was specially developed for the refining of big work pieces and mass-production. The modular construction and the additional loading table enable to laser-process glass object of user-defined length | | |
|
|
|
