|
Lutz-Jesco GmbH
|
|
 |
chemical pumps
chemical pumps | | |
 |
diaphragm pumps
diaphragm pumps | | |
 |
piston pumps
piston pumps | | |
|
|
|
|
LINSINGER MASCHINENBAU GmbH
|
|
 |
Carbide vertical circular sawing machine
Carbide vertical circular sawing machine KSA 1010 for billets and special profiles (at a manufacturer for chassis of track laying vehicles) | | |
 |
Tube cut-off machine
Clamping device for tube cut-off machine
Multi-Cut MC4-610 CNC
| | |
|
|
|
|
Linnhoff & Partner Galvanotechnik GmbH
|
|
 |
Barrel materials
Barrel materials | | |
|
|
|
|
Lift products Inc
|
|
 |
MAX-LIFT
The best value in lift tables with unparalleled features! Reduces awkward bending and lifting since the work load is always at the correct level. The possibility of back injuries is also reduced and productivity is increased.
The MAX-Lift is a superior scissor lift table currently offered in the 2000-6000 lb capacity range.
The MAX-Lift Scissor Lift table is a quality table with features such as: Built in safety bars
Trapped top & bottom scissor arms
Grease fittings on pivot points & cam rollers
Magnetic backed control box
| | |
 |
Moto-Cart Jr
The MOTO-CART is a battery operated self-propelled electric platform truck. It can be used almost anywhere equipment and supplies have to be moved. This unique cart increases productivity and reduces injuries caused by pushing and pulling ordinary non-powered carts. This flexible vehicle can travel over carpeting, tile or any hard surface, go in and out of elevators and handle 1,000 lbs. on inclines up to 6 degrees. | | |
 |
Tilting lift table
Tilting lift table
900kg - 2200kg (2000lb - 5000lb)
Lift Products MAX-Tilt & MAX-LIFT & TILT tables are designed for those applications where tilting or lift and tilting the load provides for improved access to the product. Table available with 45, 60 or 90 degree tilt.
Both series are electric hydraulic with the 45 degree models powered up and gravity down while the 60 and 90 degree models are powered both up and down with double acting cylinders. With capacities of 2,000 - 6,000 lbs., the MAX-series table can handle most applications.
| | |
|
|
|
|
LIECHTI ENGINEERING AG
|
|
 |
5-Axis Machining Center
5-Axis Machining Center for dynamic machining of Blisk, Impeller und Turbine Blade.
Torque-Motors for dynamic machining
Max. part length 335mm
Max. part Ø 350mm
Vertical Spindle
Tail stock CNC controlled
Spindle power 16 kw, 20000 rpm, 82 Nm
Tool magazine 30 tools HSK-63
Pallet pool 8/16 Positions | | |
 |
TURBOBLISK 1005
5-axis Ultra-Dynamic HSC Machining Center for producing Blisks, Impellers and other complex parts.
g-accelerated machining
Max. Part dia. 1000 mm (51")
Spindle speed 18000 rpm or 24000 rpm
Spindle power 44 KW or 30 KW
Spindle torque 57 Nm (42 ft lb) - 135 Nm (99 ft lb)
Toolmagazine 30, 60 or 80 tools
Spindle taper HSK A 63 or HSK A 80
Palletchanger optional | | |
|
|
|
|
Liebherr-Verzahntechnik GmbH
|
|
 |
Liebherr-gear hobbing machine platform 1
gear cutting machines program contains:
Production machines for gear hobbing and shaping for the automobile industry.
Universal machines featuring up to 6,000 mm workpiece diameter.
Special machines for finishing by generation and profile grinding.
| | |
 |
Liebherr-generating and profile grinding machine
With the production of gear cutting machines, Liebherr is a worldwide leading manufacturer of gear hobbing machines, gear shaping machines, generating- and profile grinding machines as well as cutting tools. These products are used by notable companies of the international vehicle industry.
The programme of the gear cutting machines is completed ideally by the product range automation- and handling systems. In this sector, gantry robots, automatic loading- and unloading devices for machine tools as well as manifold transport devices are offered.
| | |
|
|
|
|
Liebherr Hausgeräte GmbH
|
|
 |
Freezers
A wide range of freezers | | |
|
|
|
|
Leuze electronic GmbH + Co KG
|
|
 |
cubic series
cubic series | | |
 |
measuring sensors
measuring sensors | | |
|
|
|
|
LEUCO LEDERMANN GmbH & Co. KG
|
|
 |
Boring Bits
Boring Bits | | |
 |
Circular Saw Blades
Circular Saw Blades | | |
 |
Profile Knives, Turnover Knives
Profile Knives, Turnover Knives | | |
|
|
|
|
LEONHARD KURZ GmbH & Co. KG
|
|
 |
Labelling
Labelling
For a striking appearance
| | |
|
|
|
|
Leonhard Breitenbach GmbH
|
|
 |
Calender, Mixing and Smoothening Rolls
Calendering, pressing, mixing and smoothening for these manufacturing processes, precision rolls are used in order to guarantee that the final products have the optimum properties.
It is obvious that rolls used for these purposes must meet extremely high standards, since the quality demands for production, converting and treatment of materials in continuous runs can only be achieved using rolls of maximum precision with respect to geometry, runout and surface finish.
Throughout the world, machine and equipment manufacturers as well as end-users involved in the processing of paper, foils, plastics, rubber etc. are our customers. All sizes of rolls are supplied in any design which may be required.
Through close co-operation with our customers we are fully familiar with their requirements. By purposefully gearing our production range and services to suit our customers' needs, we are able to develop and provide products now, which will meet future demands.
Rolls produced by Breitenbach are manufactured to comply exactly with customers' specifications or they are designed and produced in close co-operation with the end-user. Mechanical and thermodynamic strains are taken into account.
One-hundred-percent inspection is of great importance to us. Each manufacturing step is fully documented, because complete quality assurance is a matter of course for us. Research and development are considered as means of constant improvement of materials, processes and service, and these processes are continuous.
| | |
 |
Coating and Doctor Rolls
Coating, painting, impregnating of materials in continuous runs such as paper, cardboard, plastics and metal foils, textile fabrics and non-wovens, this is the range of application for our rolls. Whenever materials in continuous runs are processed, high-precision coating rolls are needed, in order to meet the high quality standards which are specified for all final products. The slightest deviation in cylindricity and runout may lead to significant differences in the coating quality and thickness. The more precise the roll, the better coating quantity and uniformity specifications can be met. When calculating the savings for one production year or even for the service life of the rolls, the investment in roll precision will pay off.
At Leonhard Breitenbach GmbH, the standards for quality and precision are extremely high. This has made us the market leader for this product range on a worldwide basis.
| | |
 |
Crushing Rolls
Grinding, refining, squeezing, crushing, flaking these are tasks putting rolls into focus as the most important tool. Highly precise crushing rolls made by Leonhard BREITENBACH GmbH are, amongst other applications, used for preparing the following products:
foodstuff including luxury foods
animal feed
pharmaceutical products
colours
fertilizers
ceramics and stoneware
BREITENBACH crushing rolls enhance the efficiency and profitability of various production processes in several respects. On the one hand, maintenance intervals are significantly extended without affecting reliability. This means longer machine cycles without interruption, and the repair costs are cut down to the required minimum. Reduction in energy consumption during grinding is another important benefit offered by our rolls. Furthermore, we have continuously developed our products and adapted them to actual market requirements, in close cooperation with renowned mill and plant manufacturers.
This dialogue in partnership along with our experience over many years makes BREITENBACH a reliable partner specialising in the field of roll manufacture for all crushing applications. | | |
 |
Heat Transfer and Chill Rolls
Heating and cooling. The production of paper, foils, plastics, rubber etc. in continuous runs usually requires thermal treatment of the material during the production process.
Whether during manufacture, converting or processing, a correct roll temperature with least tolerance is vital.
In order to guarantee constant product quality and properties, the standards set for both heat transfer and chill rolls are extremely high.
With regard to planning and design, we place our trust in our in-house research department. Thermodynamic simulation and calculation is made, on the basis of which design engineers develop individual solutions. This enables us to design and to manufacture heat transfer and chill rolls which are characterised by an extremely uniform distribution of temperature on their surface.
Controls and checks accompany the complete production process and guarantee a consistently high quality level.
| | |
|
|
|
|
Leon Engineering A.S.
|
|
 |
Industrial Scales
Crane Scale Pyrrhus - L | | |
 |
Industrial Scales
Platform Scales Beta 1- 2 - 3 | | |
 |
Industrial Scales
Floor Scale M 40 | | |
|
|
|
|
VACMAGIC
|
|
 |
Dies and moulds , Vacuum moulds
Easy installation taking just 1/2 an hour on the first installation and can be re-installed only 10 minutes.
Fixtures and fittings can be changed as quickly as 15 seconds.For regular jobs the tools can be left set in machine so this job could be reset in less than 1 minute. Longer running jobs could be set up at less labour intense periods i.e. evening shift, weekend or if an operator goes sick the machine could be kept productive for virtually the whole shift.
Running costs
Based on an Ingersoll rand uni-10-115 7.5 kW compressor capable of 42 cfm which would cost 30p an hour run our unit uses 2cfm and would cost less than 2p an hour to run continuous. We actually have a fixture demo unit which runs perfectly off a £70 screwfix compressor.
Vacuum Chuck The vacuum chuck works on the same principle as the pallet changer. This unit is for use mainly on manual milling and grinding machines. This unit has a steel base to enable its use on magnetic chucks. Easy to change silicon 0-ring. (see animation below
| | |
|
|
|
|
LISSMAC Maschinenbau und Diamantwerkzeuge GmbH
|
|
 |
Deburring System SBM-GS.jpg
Reciprocal deburring and edge rounding in only one processing step | | |
 |
Grinding machine SBM - S.jpg
The only system which deburrs and rounds off corners in steel and stainless steel etc., in one step. Available with optinal vacuum device. | | |
 |
Steel brushing machine SBM - B.jpg
Oxide film removal from lasered parts on both sides in one step | | |
|
|
|
|
LOEMI GmbH
|
|
 |
Metal Swarf and Cooling Lubricant Recycling Units
Metal Swarf and Cooling Lubricant Recycling Units
Models LRA-150 E and SEA-2400 / LRA-3000 | | |
 |
Units for Solvent Recycling.
lra_250_2g_Units for Solvent Recycling. | | |
|
|
|
|
Loeser Maschinenfabrik GmbH
|
|
 |
Centerless grinding and polishing
12 Station belt grinding and mirror polishing line with 8 belt heads and 4 angled buffing stations. Complete material handling to packing system and final storage of the finished and plastik wrapped product in a bundle unload system. Bundle load systems with load capacity over 1 metric ton. | | |
|
|
|
|
Lutz GmbH & Co. KG
|
|
 |
Rapid prototyping
LUTZ Blades – Rapid prototyping
Do you need to test a blade design you are developing within a few days?
LUTZ-Engineering and Product Development Department has the solution: Rapid prototyping and Manufacturing.
Using our Rapid prototyping Approach we design and develop your custom blades within few days in production quality without the expenses and risk of a large production run!
Your benefits of LUTZ Rapid prototyping include:
Pre-launch samples within a few days
Maximum flexibility
Smallest batch sizes
Efficient, accelerated product development
Development and optimization prior to series launch
LUTZ Blades has what you expect and more!
Broad choice of expertly picked materials
Blades in every conceivable shape and size, even odd shapes
CNC based grinding and cutting
Electronic inspection and measurement of critical requirements Heat treatment know-how
High performance coatings
| | |
|
|
|
|
|
|
 |
Hydraulic cutters
Hydraulic cutters | | |
 |
Hydraulic rescue equipment.
Hydraulic rescue equipment. | | |
 |
Hydraulic units
Hydraulic units | | |
 |
Telescopic cylinders.
Telescopic cylinders. | | |
|
|
|
|
Lubas Maschinen und Geräte Vakuumhebezeuge
|
|
 |
Lifting device
A fully automatic unpiling installation. Copper electrodes are lifted and supplied by means of a tipping mechanism. Remarkable is the feature which allows to process piles of relatively bad quality and extremely rough surfaces. Besides, it does not matter, whether the electrodes are longitudinal or radially corrugated, folded or smooth. The installation works in a three-shift work and is located at the feed of raw materials of a manufacturing chain. Already during the planing phase of this installation, the operational safety was of course taken into consideration. | | |
 |
Plate deloader
A fully automatic lifting and storing installation to unload a manufacturing chain to several shipment terminals. A special feature of this installation is the variance of tape-widths going from 700 to 3,400 mm (~27 to 132 in.) and thicknesses starting at 4 mm (~ .16 in.).
The processable length of the tapes starts at 1,200 mm (~47 in.) and reaches up to 17,000 mm (~663 in.). Also asymmetrical and parallel lifting are possible.
The maximum weight of the tapes is 6,000 kg (~13,200 lbs.).
The tapes are flooded with water. The vacuum system is designed in a way that manual drainage is unnecessary. The installation is designed for running in a three-shift work at the end of a manufacturing chain.
On account of the intensively automated process, great importance was put on the reliability and the nearly maintenance-free operation.
| | |
 |
Universal vacuum-unit UniTravMini
The UniMini is designed for the use up to about 1,000 kg (~2,200 lbs.). Different suction cups or groups of suction cups, but also cross beams can be easily attached. Barrels, wooden boards, plates, entire bundles etc. are tranportable. The device will always be adapted to your specific demands. For higher capacities, please look for the series UniTrav. | | |
|
|
|
|
LTG Aktiengesellschaft
|
|
 |
For any air technology requirement LTG High-Performance Fans
For any air technology requirement LTG High-Performance Fans LTG offers a full range of high-performance fans for industrial, process and room air technology: - Axial fans for gaseous media with low solids contents - Centrifugal fans with single or double-sided suction for gaseous media with low solids contents - Centrifugal conveying fans with single-sided suction for gaseous media with high solids contents - Tangential fans for gaseous media without solids content, for conveying media temperatures of -40 to +800 °C. | | |
|
|
|
|
LTA Lufttechnik GmbH
|
|
 |
Air suction and cleaning
Air suction and cleaning are made at source. | | |
 |
Exhaust air
Exhaust air coming from a group of machines is collected at one point where it is then decontaminated. | | |
 |
The exhaust air is collected via a tube
The exhaust air is collected via a tube which conveys it to a central device where it's purified | | |
|
|
|
|
LOSMA S.p.A
|
|
 |
AIR FILTERS
For the air cleaning we offer many different models of mist collectors: centrifugal (in the versions turbine, single centrifuge and double centrifuge), static filters and specific units for very high throughputs or centralized systems. All the models are ready for being arranged with a range width of modules of pre and after-filtration therefore to resolve in specific way any type of problem. Our mist collectors can be directly installed on the machine tools. They remove the polluting from the source, and can easy be moved, and used again on other machines or switched off in case they are not used. | | |
 |
COOLANT FILTERS
The Losma Liquid Filtration Range is made up of various types of filter to cope with all eventualities. Losma’s expertise in this area shows in all its products, from the simplest of cloth filters to more complex integrated systems with several filtration stages. This know-how also means that tailor-made solutions and one-off designs can be proposed for special customer requirements. The Liquid Filtration Range comprises seven product lines, DETEX, DEMAG, DECOM, RIVER, SKIM; SPRING and MASTER Series which can all be equipped with refrigeration systems to order. | | |
|
|
|
|
Lorch Schweisstechnik GmbH
|
|
 |
Lorch inverter plasma cutting units
Lorch inverter plasma cutting units.
Z 70 and Z 110.
4 times hotter than the sun itself.
Incredible speed, durability, mobility. | | |
 |
Lorch M 3030
Lorch M 3030 automotive.
MIG-MAG welding,
and MIG-brazing all in one. | | |
 |
MIG-MAG welders
The 2nd generation M series has taken on a cult status.
The MIG-MAG welding system for thin sheet and lightweight steel construction. | | |
 |
TIG-welders
H 150
Ideal for electrodes up to 4 mm.
Higher powered with 150 A.
Good for TIG welding
| | |
|
|
|
|
LOOMIS PRODUCTS Kahlefeld GmbH
|
|
 |
Isostatic Dry Bag Presses
Isostatic Dry Bag Presses | | |
 |
PISTON EXTRUDER - 232 DT MODEL
PISTON EXTRUDER - 232 DT MODEL | | |
|
|
|
|
LOKE−Engineering
|
|
 |
LCG - LOKE Crane Guidance Systems
LCG - LOKE Crane Guidance Systems | | |
|
|
|
|
Logosol GmbH Holzbearbeitungsmaschinen
|
|
 |
Logosol M5
Logosol M5 – In Its Best Form
The original Logosol Sawmill – fully functional at an optimal price.
M5 IS A REFINED VERSION of the original Logosol sawmill, introduced in 1988, which has now reached its optimal function. M5 is the most sold model of all Logosol sawmills, so there is no doubt that it is a good sawmill. If you are not going to saw that much, or if you for instance are only going to use the sawmill for log house moulding, you can save some money by choosing a Logosol M5. It lacks some features that the M7 has, however, and it cannot be combined with the new accessories that have been specially developed for M7.
| | |
 |
Logosol M7
The M7 Sawmill Will Make Your Life More Complete
With the Logosol Sawmill you can saw a tree on site on a woodland plot, in the lengths and dimensions of your choice. Because it is lightweight and easy to use, you can easily take it with you without the help of others.
Since our first sawmill appeared on the market in 1988, its construction and design have been improved. This has resulted in the perfect oneman sawmill. Over 20 000 Logosol Sawmills have already been sold around the world. At the same time, the sale of spare parts is insignifi cant, and that says quite a lot.
Mobile or Stationary
Many of our customers have stationary Logosol sawmills, but one of the advantages with the sawmill is that you can take it to the place where the timber is, e.g. to the forest or to your cottage. Once you have done that, all that is left for you is to fell a tree and then process it into boards, planks and beams.
Impressive Precision
The accuracy of our sawmill is very impressive. You can saw whatever you wish, from beams for log frame structures, to millimetre thin sheets. The Logosol Sawmill can process logs from any tree you will fi nd in a forest or in a garden: oak, aspen, apple-tree, cherry-tree, and so on. The sawmill is easily handled by one man. You are only limited by your imagination.
Professional Results at Once
Logs are rolled onto the mill from a log table with the working height of 55 cm. They are then lifted up to saw height with a turn of the hand-operated crank. The sawed boards lie accessible at waist height and are easy to lift off. Hence the Logosol Sawmill not only saves your time, but also spares your back. The saw carriage slides effortlessly along a stable guide rail. Visible and audible gradations permit the adjusting of the sawmill’s settings to be both easy and accurate. All instructions can be read in the manual that comes with each sawmill. The Logosol Sawmill is made from anodized aluminium, which is resistant to corrosion, is lightweight, and yet very durable. The smooth surface of the guide rail has a low friction coeffi cient, is easy to clean, and requires minimal maintenance service. Logosol utilizes a thinner guide bar and chain, which contributes to signifi cantly faster sawing. The result of using the thinner guide bar and chain is that the cut taken is only insignifi cantly wider than the one taken by a circular saw. One sharp chain saws approximately fi ve normal sized logs before it needs to be re-sharpened.
High Production Capacity
The Logosol Sawmill is run with an ordinary power saw of a minimum capacity of 60 cc. The typical saw unit is a Stihl MS660 92 cc or a Husqvarna 385XP 85 cc. With such an equipment you can saw 5 metres per minute from a 6 inch thick beam. The powerful electric saws Logosol E5000 and E6000 nearly double the speed. If you use the Logosol Bandsaw you can even saw 16 metres per minute. But technical data is one thing, working in practice is another. The logs shall not only be sawed up, but also be stacked, new logs need to be rolled to the saw and, above all, you will need a coffee break now and then. Our customers say that one operator alone can produce between two and three cubic metres sawed lumber in one working day – and we believe them! | | |
 |
Logosol SH230
The Soloplaner Rips, Planes, and Profiles in one Single Operation
The Golden Axe – the award for the best wood processing machine presented jointly by the Swedish Land Magazine, Elmia Trade Fair and The Forest Owners Association.
Logosol SH230 – a Must for every Carpenter and Craftsman.
THE SOLOPLANER SHOULD STAND in the shop of every sawmill owner and carpenter. It is a versatile machine which squares, rips and profiles. When you have got used to the high capacity and the possibilities of the machine, the Soloplaner will be indispensable.
The Soloplaner planes the board and cuts it in the right width in one single operation. What enables this, is the 230 mm wide cutter with a circular saw positioned immediately next to it. The cutter and the circular saw rotate at a speed of 6000 rpm, which gives a quality result both on the planed and the sawn surfaces. In Logosol’s Moulding Knives Catalogue you can look at several examples of profiles you can produce. The profile knives can be utilized at the same time as the planer knives and the circular saw.
With the Soloplaner you can produce notch and groove on up to 5 cm wide panels. If you want to have wider dimensions you make a so-called overlapping half-tongue.
Planing and Squaring
The most common application of the Soloplaner is to plane and square boards. The board gets the right width and gets planed simultaneously. If you want to process all four sides, you just run the board twice through the machine. Height and width adjustments are made in two simple operations.
| | |
 |
PH260
Logosol PH260 | | |
|
|
|
|
Logopak Systeme
|
|
 |
Labeller
Labeling machines | | |
|
|
|
|
LOFT Anlagenbau und Beratung GmbH
|
|
 |
Interface pretreatment
LOFT
evaporation plant
TYP DESTIMAT®
are the main item of a sewage processing plant conceived as a spot solution with a 100 per cent repatriation of the water as high pure destillat. You stand out due to high reliability and best values of the quality of destillat for absolutely maintenance-free business, our unconditional claim is high-quality execution as well as the quality of the components. | | |
|
|
|
|
Leistritz Thommen GmbH
|
|
 |
Automation solution
Automation solution | | |
 |
burnishing machine
Burnishing machines with rolling force up to 40 kN
| | |
 |
Tools and accessories
Tools and accessories | | |
|
|
|
|
Leistritz Produktionstechnik GmbH
|
|
 |
Machine Tools Division
We design and provide complex production units for economical and environmentally-sound manufacturing of screw threads and/or thread-like profiles. A customised modular design concept allows for individual solutions for specific problems, and includes complete finishing of workpieces.
Profile drawing machines and end finishing machinery complement the machine program. With our keyseating machines we offer performance-orientated solutions ranging from a simple feather slot to complete internal gear cutting. In addition to the machinery program we also offer tools that have been developed for optimal machining applications.
| | |
|
|
|
|
LEISTER Process Technologies
|
|
 |
Automatic wedge welding machine for civil and tunnel construction
COMET
The world's smallest and lightest compact machine with a integrated control box. The special wedge with optimized heat transfer guarantees top welding performance.
| | |
 |
Brushless hot air blower
MISTRAL
Its qualities become especially apparent where large quantities of heat in a limited space are required. It is so handy that even the most inaccessible places can be reached. Thanks to its new brushless motor, maintenance is reduced to an absolute minimum. That simply makes it a reliable, cost-effective and powerfull device.
| | |
 |
High speed automatic wedge welding machine
ASTRO
The world's fastest hot-wedge welding machine welds at up to 5 meters per minute — and, of course, the welding seams are also perfect at this speed.
| | |
 |
Hot air welding machine
UNIPLAN E
For efficient hot-air welding of industrial fabrics the UNIPLAN E is ideal. A guide roller keeps the tool precisely on course. Its digital display shows set and actual values of temperature and welding speed. The heating is electronically controlled.
| | |
 |
Laser welding machine
Globo Welding
The state-of-the-art welding process is based on the Contour Welding principle and generates the perfect appearance in terms of the welding quality. This launched process onto the welding technologies of plastics enables a welding method without any elaborate clamping device. Accordingly, the existing limitation on 2 dimensional welding process is eliminated. Consequently, the welding process can be extended to 3D-welding.
| | |
 |
Laser welding machine
NOVOLAS MICRO
A special mask welding system with supreme precision.
NOVOLAS TM MICRO welds fine structures as narrow as 100 µm. Any imaginable shape can be welded with a positioning accuracy down to 2 µm. Masks can be exchanged with ease, allowing for high flexibility. NOVOLAS TM MICRO can be operated as a manual workstation or integrated for mass production.
| | |
 |
Screw extruder for plastic welding
FUSION 2
Extrusion welding is carried out in wide variety of areas and is becoming evermore demanding. Leister offers the right tool for all plastics applications in process equipment manufacture and civil engineering. The specialist obtains everything with us from a single source: Devices from 0.3 to 6.0 kilo per hour. Convince yourself
| | |
 |
Semi automatic welder
TRIAC DRIVE PID
Horizontal, vertical, diagonal. This tried and tested semi-automatic welding machine can be used universally. The increased welding speed compared with hand welding gives rise to higher productivity.
| | |
 |
Side channel blower
ROBUST
Versatile and operable at high ambient temperature up to 60°C. Despite its small dimensions, ROBUST is a real powerhouse. It offers great flexibility thanks to its extensive range of accessories.
| | |
 |
Smallest hand welding tool with digital display
WELDING PEN R
The latest generation of tools presents itself as extremely handy. Because the air supply comes from a separate blower, the Leister WELDING PEN R reaches into the most inaccessible places. It also displays the welding temperature digitally.
| | |
|
|
|
|
Lapmaster International Limited - UK
|
|
 |
FINE GRINDING MACHINERY
FINE GRINDING MACHINERY | | |
 |
SINGLE DOUBLE DISC MACHINERY
SINGLE DOUBLE DISC MACHINERY | | |
|
|
|
|
LANXESS AG
|
|
 |
Performance Polymers
Butyl Rubber
Polybutadiene
Rubber Technical
Rubber Products | | |
|
|
|
|
Lantek Sheet Metal Solutions
|
|
 |
Lantek Expert Cut is a CAD / CAM system
Lantek Expert Cut is a CAD / CAM system specially designed to automate the programming of sheet metal cutting machines (oxicut, plasma, laser, water jet). It is the result of more than 20 years experience in close collaboration with both manufacturers and users of these types of machines. It perfectly combines machine technology with customers’ programming and management requirements. | | |
|
|
|
|
Langzauner GesmbH
|
|
 |
belt sanding machines
belt sanding machines | | |
 |
edge sanding machines
edge sanding machines | | |
 |
Wood-edge gluing press
Wood-edge gluing press with hydraulic side pressure equipment and installed material chute. | | |
|
|
|
|
Lang Maschinenbau GmbH & Co. KG
|
|
 |
bending machines
brake-line bending machines | | |
|
|
|
|
LANDUSTRIE SNEEK B.V
|
|
 |
Land screw pumps
Landy screw pumps for STP Hamburg | | |
|
|
|
|
Land Instruments International
|
|
 |
flue gas zirconia oxygen analyser
land genesis stand alone flue gas zirconia oxygen analyser | | |
|
|
|
|
LANCO GmbH
|
|
 |
Aluminium silos.
Aluminium silos. | | |
 |
Dyeing apparatus for the plastics industry
Dyeing apparatus for the plastics industry | | |
|
|
|
|
Lambert-Wahli AG
|
|
 |
conventional gear hobbing machines.
conventional gear hobbing machines. | | |
 |
The Worm and Thread Milling Machine
The Worm and Thread Milling Machine Lambert 248 CNC handles up to DP 6 | | |
 |
Wahli 100 CNC with new design
Our response to the new challenges in cutting technology. Now with new design
| | |
 |
Wahli 90
Gear hobbing machine for watch, instrument and micro-mechanical industries
| | |
|
|
|
|
LAGRA ELEKTROTECHNIK GMBH
|
|
 |
cable protection conduits and protection fittings
cable protection conduits and protection fittings | | |
|
|
|
|
Lackfabrik Karl Rüsche GmbH & Co. KG
|
|
 |
Solvent based systems primers
solvent based systems primers | | |
|
|
|
|
Lachenmeier A/S
|
|
 |
Shrink Wrapping
Combined Shrink Wrapping
The space-saving Combined Shrink Wrapping Machine is a machine where hood application
and shrinking are carried out in one single unit
Shrinking of the film takes place by means of natural gas, liquid gas or electricity.
The LACHENMEIER gas burners are lamella burners, which ensure an even distribution over the entire burner surface. Furthermore, our burners are individually adjustable, which means that we guarantee an even heat distribution to all four sides of the load in case of variations in product dimension. | | |
 |
Stretch Hood
Multi Flex
The Multi Flex machine is characterised by its great flexibility, as the machine is capable of wrapping all pallet sizes ranging from 1/4 and 1/2 to 1/1 pallets in one machine with automatic change between the different pallet sizes and without compromising with load stability.
The flexibility lies in the gripper system, where each of the four grippers can be adjusted indi-
vidually both lengthways and widthways and thus adapt to the actual load size.
The Multi Flex machine has a capacity of 180+ pallet loads per hour. | | |
 |
Stretch Wrapping
Stretch Wrapping
The fully automatic Stretch Wrapper consists of a rotating ring with a film dispenser rotating around a pallet load, which remains stationary, making it possible to wrap even very unstable loads.
The film end is automatically sealed to the second last layer of film, ensuring that the film cannot work loose or unwrap during transport. As there are no loose film ends, you will not experience any problems when storing in automatic warehouses.
With a capacity exceeding 100 pallet loads per hour, our Stretch Wrapper is an excellent alternative to stretch hood and shrink wrapping, depending on the product and on stability requirements. | | |
|
|
|
|
LASCO Umformtechnik GmbH
|
|
 |
presses
presses | | |
 |
presses
presses | | |
|
|
|
|
Laserline GmbH
|
|
 |
direct diode laser series
The direct diode laser series, LDL, is
available from Laserline in several
ranges offering different beam qualities
and laser output powers of 150 W to
10,000 W.
Despite its high power, the diode laser
head is no larger than a shoebox and
weighs no more than 18 kg.
The laser head is equipped with working optics,
such as those required for hardening and welding
applications, and is positioned directly in the processing area in production. The spot can be adjusted to suit different applications by simply changing the working optics. In all cases, maximum homogeneity is achieved.
The laser head can often be equipped with a removable fiber connector and, consequently, can be used with or without laser light cable.
Mobile supply unit
The corresponding mobile supply unit holds, as for the LDF laser series, all components for diode laser operation and has a graphical user interface with programmable power selection and interaction with external control signals.
| | |
|
|
|
|
Lasso Technik AG
|
|
 |
Compensators (Expansion joints).
Compensators (Expansion joints). | | |
 |
Flange slides
Flange slides | | |
|
|
|
|
Leifeld Metal Spinning GmbH
|
|
 |
Spinning and planishing machines
Spinning and planishing machines | | |
|
|
|
|
Leicht Stanzautomation GmbH
|
|
 |
RSM-080-CNC: The new standard in raw strip welding
Our new CNC-controlled raw strip welding machines basing on AC servo technology allow fusions by means of electric arc for tape-thickness of only 0.1 mms.
Flexible, reliable application in your manufacturing and a user friendly handling gives you an economic advance, namely essential cost savings. | | |
 |
WID Carrier Strip Welder
Perfect carrier strip welding technique inside extremely compact construction.
High-precision mechanics are combined with the most modern control engineering
having only limited space available. | | |
 |
WIG compact raw material welding machine (Tungsten Inert Gas)
The "compact one" of our popular WIG welding machines.
| | |
 |
WIG Raw Material Welding machine (Tungsten Inert Gas). You may produce infinitely.
Excellent weld results are only achieved with excellent technology and precision. Homogeneous weld seams also permit an extreme bending for the highest demands. The realization of the endless manufacturing guarantees a clear increase of the added value of your products. | | |
|
|
|
|
Leica Geosystems AG
|
|
 |
Laser Trackers
Often imitated but never surpassed, Leica Geosystems Laser Trackers have been at the forefront of laser tracking technology for more than 15 years. These portable coordinate measuring machines have enabled companies around the world to deliver innovative products, achieve unheard-of tolerances, substantially lower manufacturing costs and increase productivity well beyond their expectations. | | |
 |
Portable CMM
Are you interested in measuring and probing of large-scale objects and assembly jigs in the aerospace and automotive industries, right there on the spot? New 3D solutions, like the 6DoF device for automated applications, the Leica T-Mac, the armless and wireless Leica T-Probe and the high-speed hand scanner Leica T-Scan make all that possible! | | |
 |
Software
Leica's easy to use measuring and analysis software takes your work furher. | | |
|
|
|
|
Leibrock Im− u. Export GmbH
|
|
 |
Crimping machine
Crimping machine for finished uppers | | |
|
|
|
|
Lehnert GmbH
|
|
 |
Industrial factory partition
The widest variety of areas make up an industrial factory. They somehow belong together and are located in common halls. And yet they are different. Wherever separation is required in industry, then a hall dividing wall from Lehnert, with its variable and adaptable design, is exactly the right choice. It can be removed again and rebuilt if requirements change. It opens with doors and gates of all kinds and creates any dimension in every shape of hall.
| | |
|
|
|
|
LEGRIS SA
|
|
 |
Brass compression fitting
- low and medium pressure
- compatible with many fluids
- direct assembly, without soldering or tubing preparation
- many connection possibilities
- a large range | | |
 |
Pneumatic accessory
- in brass for low and medium pressure
- in stainless steel for corrosive fluids and harsh environments
- anodized aluminium manifolds
- sealing accessories
- silencers | | |
 |
Stainless steel compression fitting
- all 316L stainless steel construction
- excellent resistance to aggressive and corrosive environments
- withstand high temperatures and pressures
- easy to use
| | |
|
|
|
|
Ledinek Maschinen und Anlagen GmbH
|
|
 |
Planers
High-speed planers | | |
 |
Planers
Beam planers | | |
|
|
|
|
LEANTECHNIK AG
|
|
 |
lifgo linear
lifgo linear was developed for very long, horizontal travel.
The lifgo linear drive module moves along a toothed linear rail.
The great strength of the system lies in its compactness – drive and guide are a single unit working on a toothed linear rail. The result is an astoundingly simple mechanism | | |
 |
Schlüter SL lifting elements
Schlüter SL lifting elements are block-shaped components for the construction of complete lifting systems. The rack gear drives, based upon a flexible building block system, allow synchronous lateral and lifting movements in all three axes.
Using the basic model, system configurations for an enormous number of different tasks can be realised. The Schlüter lifting elements work on the tried and tested, reliable principle of the rack gear. These turn rotation into linear movement. Thanks to the “clip and go” system - the rapid installation system - all of the components can be simply and securely either screwed together or connected by insertion; mechanical keying ensures correct assembly.
Interested? Then simply pick up the phone, or write. We would be pleased to send you further information material. In our download area, we offer the application and design handbook in the form of a PDF file, as well as a large number of CAD files for your project.
| | |
|
|
|
|
Laweco Maschinen− und Apparatebau GmbH
|
|
 |
lifting tables
lifting tables and material handeling solutions | | |
|
|
|
|
Laudenberg Verpackungsmaschinen GmbH
|
|
 |
FBMD2
Rotary, Form, Filling
and Sealing Machine
Food, Sweets, Pet Food ,
Cosmetics
| | |
 |
LCM504
Continuous Operation Form, Filling,
and Sealing Machine
Pharmaceuticals, Food, Sweets, Cosmetics
Pet Food and Detergents
| | |
 |
RP-8BT
Rotary, Filling
and Sealing Machine
Food, Sweets, Cosmetics, Pet Food and Detergents
| | |
 |
RP-8T-8VF
Rotary, Filling,
Vacuum and Sealing Machine
Food, Pet Food
| | |
|
|
|
|
Lauda Dr. R. Wobser GmbH & Co. KG
|
|
 |
universal water baths for the laboratory
universal water baths for the laboratory | | |
|
|
|
|
Latschbacher GmbH
|
|
 |
Algiz 8
Designed for harsh environments, the Algiz 8 delivers maximum performance to mobile workforce.
Algiz 8 is a Tablet PC that meets rigorous military standard for drops, vibration, and condensation. With an IP65 rating it is protected against dust and water. It handles extreme temperatures, from -20°C to +50°C.
Whatever the conditions are, - Algiz will do the job | | |
 |
TimbaTec
The history of "TimbaTec" has already started in the early eighties. Since then Latschbacher concentrates on designing, developing and producing mobile data collection terminals for the challenging forestry, where these devices are exposed to wetness, dust and dirt as well as extreme variation in temperature.
Under the brand name "TimbaTec" we deliver robust and industrial-strength devices for mobile data collection. The product-portfolio of Latschbacher comprises robust PDAs, Tablet PCs and mobile printer, which are mainly used for forestry, surveying and mapping, building companies, service and maintenance, transport and logistics. There, robustness, longevity and equipment dependability are very important. | | |
|
|
|
|
Labelident GmbH
|
|
 |
Heat shrinkable wire identification sleeve
Heat shrinkable sleeves are ideally suited for the identification of cables, wires and pipes. Labelident offers a comprehensive selection of heat shrinkable markers on roll or cut to the required length. In combination with our recommended ribbons for printing shrink markers in thermal transfer printers you achieve optimal printing results with a high legibility. | | |
 |
Thermal transfer label
Labelident GmbH offers a wide selection of standard thermal transfer labels on different materials paper, polyester, polyimid in many different sizes. As a manufacturer we can produce very quickly individual sizes and shapes | | |
|
|
|
