|
|
|
Werkzeugmaschinenfabrik Glauchau GmbH
|
|
 |
Face grinders
range SP
• The universal CNC-machine for a
wide range on saw blades retary
knifes
• novel, stiff design ensures an absolut
quiet operation *
• up to 30% higher output in opposite
to conventional technics (cutting
capacity of the machine up to 25
kg/h)
• high level in constant size
• optimised surface finish
• less straighten operations
• no stress variations on workpieces
•simple and safe handling without
special knowledge in CNC
programming because of home
developed software WOP Glauchau ®
| | |
 |
Internal Cylindrical Grinder
Internal Cylindrical Grinder | | |
 |
Machining centres
Universal machining centre for three-side machining
of medium to large chucking parts, long workpieces guided by steady rests and shaft-type workpieces for external grinding between centres.
Maximum productivity and precision thanks to complete machining of inside and outside contours using two independently operating grinding units 6-L 1400
Internal grinding unit as a spindle revolver allowing to hold up to four grinding spindles or three grinding spindles and tailstock (optional), to grind bore holes, internal end faces and internal tapers
External grinding unit consisting of a two-axis carriage unit and a spindle revolver with two external grinding wheels allowing to grind external diameters, by longitudinal grinding or plunge-grinding, outside end faces by oscillating grinding, plunge-grinding or angular infeed grinding
Control and drive systems using SIEMENS “SINUMERIK 840D” and “SIMODRIVE” drives
Efficient machining of single parts and series
High stability under load at workpiece spindle – 650 kp at spindle head – allowing to take up heavy, compact chucking devices and workpieces
Out-of-round grinding using a C axis (optional)
| | |
 |
Universal Circular Grinding Machine
Universal Circular Grinding Machine | | |
|
|
|
|
Wiha Werkzeuge GmbH
|
|
 |
High Leverage Combination Pliers
High Leverage Combination Pliers | | |
 |
Wiha SoftFinish®
The Specialist for Dry and General Applications
Comfortable multi-component handle with soft zone for optimum torque transfer
Chrome-vanadium-molybdenum steel blade, through-hardened, matt chrome-plated | | |
|
|
|
|
WIKA MESSGERÄTEVERTRIEB GmbH & Co. KG
|
|
 |
Electronic pressure measuring instruments
WIKA offers a complete range of electronic pressure measuring instruments: pressure sensors, pressure switches, pressure transmitters and transmitters with Turn down (UniTrans) for the measurement of gauge, absolute and differential pressure. | | |
 |
Mechanical pressure measuring instruments
Indicating instruments for gauge, absolute and differential pressure with bourdon tube, diaphragm or capsule pressure element have been tested millions of times over. | | |
 |
OEM Pressure Transmitter with Thin Film Technology for Mobile Hydraulic Applications Model MH-2
Applications:
Mobile hydraulics
Mechanical engineering
Automotive industry
Pressure range:
0...25 up to 0...600 bar
Output signal:
4...20 mA, 2-wire
1...5 V, 3-wire
0...10 V, 3-wire
0,5 ... 4,5 V, ratiometric, 3-wire
Accuracy:
1 % of span
Wetted parts:
Stainless steel 316L and 1.4542
| | |
|
|
|
|
Wilfried Strothmann GmbH
|
|
 |
Handling robots
Handling robots | | |
 |
Industrial robots
Industrial robots | | |
 |
Robot technology
Robot technology | | |
 |
Transport systems
Transport systems | | |
|
|
|
|
Wilhelm Bahmueller Maschinenbau-Praezisionswerkzeuge GmbH
|
|
 |
Corrugated Board Converting Systems
For the production of folded boxes made of corrugated board
Automatic folding and sealing of all qualities and dimensions
| | |
 |
Grinding Machines
High-Precision Production Grinding Systems for internal, external and simultaneous processing of extremely small workpieces
Process engineering, grinding technology, automation options for µ-precise manufacturing of super-fine precision parts - in particular for automotive injection systems
| | |
 |
HSK tool holding systems DIN 69893
Since its standardization the hollow shank taper is the standard interface between machine and tool.
The advantages speak for themselves:
High rigidity and malleability capacity
High reproducibility after tool change
Outstanding concentricity properties | | |
 |
Tool Holding Systems
Precision single and modular tool holders and systems for cutting machine tools
Partner of the leading tool system suppliers
E-Shop: spannzeuge.de
| | |
|
|
|
|
Wilhelm Mende GmbH & Co.
|
|
 |
MENDE Blockboard - Okoumé (or similar)
The traditional 3- ply blockboard offers high quality and is produced as per DIN 68705
dimensions: 1.850 / 2.050 x 5.200 mm 1.220 x 2.100 / 2.440 mm (- 25 mm)
thicknesses: 13, 16, 19, 22, 25, 28, 30, 38 mm
gluing: IF 20, IW 67, AW 100 | | |
 |
MENDE Blockboard MDF
Nearly unlimited possibilities in operating, handling and refinement, mechanical surface design through lacquer, colours, veneer, plastic and other materials, extremely high mechanical proficiency by sawing, moulding, drilling and clamping
dimensions: 2.050 x 5.200 mm
thicknesses: 16, 19, 22, 25, 28 mm
gluing: IF 20 | | |
 |
MENDE Fiberspan
Fiberspan is especially engineered for siding of motorhomes and trailers. Fiberspan combines our high quality Mende wood products with the advantages of highly developed reinforced fiberglass laminates. Heat- and waterproofed glued Mende V100 chipboard starting from 2.5 mm thickness as substate
dimensions: width max. 2.600 mm, length max. 12.000 mm | | |
 |
MENDE Sandwich Flooring
High quality birch plywood core(BB/BB). Faces laminated to 0.6 mm CPL (Continuous Pressure Laminate). Specially designed for use in vehicles and busses. We are offering the lamination of plywood with a viriety of various materials as decorative HPL and Polypropylene
dimensions: 2.500 x 1.800 mm (10,5 mm thickness)
gluing: AW 100 adhesive (MUPF | | |
|
|
|
|
WILHELMI GmbH
|
|
 |
Rubber buffers
Rubber buffers | | |
 |
Rubber metal connections
Rubber metal connections | | |
 |
Rubber metal parts
Rubber metal parts | | |
|
|
|
|
Willi Göbel Maschinenbau GmbH
|
|
 |
EXTERNAL CYLINDRICAL GRINDERS
EXTERNAL CYLINDRICAL GRINDERS | | |
|
|
|
|
Willibald J GmbH
|
|
 |
drum screens
mobile and stationary drum screens | | |
 |
Minimax 2000 - Shredder Universal
The optimal solution for all Biomass projects
Shredding and screening (optional) in one passage
Accurate and exact defined fractions
Optimal adaptability of power to the loading
Concurrent material for burning and composting
High throughput rate | | |
 |
shredder universal
ecomax shredder universal | | |
 |
windrow turners
mobile compost windrow turners. | | |
|
|
|
|
Willy Degen Werkzeugmaschinen GmbH & Co. KG
|
|
 |
cnc drilling machines
cnc drilling machines | | |
 |
cnc flange grinding machines
cnc flange grinding machines | | |
 |
cnc grinding centres
cnc grinding centres | | |
 |
CNC turning centres
CNC turning centres | | |
 |
Deep drilling machines
Deep drilling machines | | |
 |
End facing machines
End facing machines | | |
 |
Precision grinding machines
Precision grinding machines | | |
 |
Profile grinding machines
Profile grinding machines | | |
 |
Surface grinding machines
Surface grinding machines | | |
|
|
|
|
Wiest AG Kalibriersysteme
|
|
 |
Calibration and Measurement with LaserLAB
Do you not think that it should be possible to measure everything around the robot directly inside the manufacturing cell – namely with only one handy measuring system? This is possible! Thanks to the LaserLAB conceived by WIEST you have a solution for all measurements!
LaserLAB is a patented measuring procedure. It consists of a pentagonal blue measuring sensor with five laser triangulation sensors, measuring balls and suitable software each for one application area. LaserLAB does not remain stationary in one robot cell, but can be used flexibly in several cells. If a measuring ball is placed into the visibility area of the measuring system, the position of the ball centre will be calculated. Due to the direct correlation of the ball centre to the Tool Centre Point (TCP) of the robot, it
is possible to measure the robot. As you get a solution for all measurements around the robot, you can save unnecessary costs. With the system from WIEST you will achieve a high accuracy in all measuring tasks and you will
be able to carry out all measurements by yourself – and thus save valuable production time! Therefore, LaserLAB is not just another solution, but the permanent solution!
Your Advantage
All measurements with one system
Application for initial operation and maintenance
Automated non-contact measurement
Robot calibration directly inside the manufacturing cell
Easy operation, applicable by yourself!
No teach-in repetition!
Reduction of downtimes to a minimum
Compatible with most of the common robots
Very robust, solid design
Proven in industrial environment
Mobile and flexible use | | |
 |
Calibration and Measurement with LaserLAB
Do you not think that it should be possible to measure everything around the robot directly inside the manufacturing cell – namely with only one handy measuring system? This is possible! Thanks to the LaserLAB conceived by WIEST you have a solution for all measurements!
LaserLAB is a patented measuring procedure. It consists of a pentagonal blue measuring sensor with five laser triangulation sensors, measuring balls and suitable software each for one application area. LaserLAB does not remain stationary in one robot cell, but can be used flexibly in several cells. If a measuring ball is placed into the visibility area of the measuring system, the position of the ball centre will be calculated. Due to the direct correlation of the ball centre to the Tool Centre Point (TCP) of the robot, it
is possible to measure the robot. As you get a solution for all measurements around the robot, you can save unnecessary costs. With the system from WIEST you will achieve a high accuracy in all measuring tasks and you will
be able to carry out all measurements by yourself – and thus save valuable production time! Therefore, LaserLAB is not just another solution, but the permanent solution!
Your Advantage
All measurements with one system
Application for initial operation and maintenance
Automated non-contact measurement
Robot calibration directly inside the manufacturing cell
Easy operation, applicable by yourself!
No teach-in repetition!
Reduction of downtimes to a minimum
Compatible with most of the common robots
Very robust, solid design
Proven in industrial environment
Mobile and flexible use
| | |
|
|
|
|
Wieland-Werke AG
|
|
 |
Wieland is a leading European manufacturer of innovative copper tubes for industrial and domestic applications.
Our state-of-the-art tube mills are located at Ulm and Vöhringen in Germany, Amstetten in Austria, Edenvale in South Africa and Wheeling in the USA. Research and development, production and sales of our copper tubes are certified according to DIN EN ISO 9001.
On the following pages, you can access our product catalogue and thermo-technical calculations for copper tubes and find your personal contact from our sales departments and technical service along with general information about the Tube Division.
| | |
 |
Wieland is a leading European manufacturer of innovative rolled products.
With three German rolling mills in Langenberg, Villingen and Vöhringen, as well as an extensive network of sales branches, the Rolled Products Division is able to supply strip and sheet to the whole range of markets and customers in the most efficient and effective way possible. Our rolled products are available in a wide variety of materials and delivery formats. As from February 2004, the Rolled Product Division is certified according to ISO/TS 16949:2002. | | |
|
|
|
|
Werth Messtechnik GmbH
|
|
 |
Accessories, specialised measurement equipment
Axis of rotation/tilt, complete 5-axis integration for the solution of complex measurement tasks | | |
 |
Coordinate measuring systems
Coordinate measuring systems | | |
 |
Measuring and profile projectors
Werth Compact 300, Werth Optimus 300,
Werth Record 500/600 and Werth C30:
The "high accurate" projectors
| | |
|
|
|
|
Westag & Getalit AG
|
|
 |
Make your home more attractive
with decorative furniture elements, such as kitchen worktops, window sills, furniture fronts and other decorative interior design elements.
| | |
 |
Panels create surfaces - BETOPLAN
Westag & Getalit AG has been a pioneer in plywood manufacture since 1917 and paved the way for the development of modern formwork.
On the basis of our competence in formwork panels, we have also developed related panels for other uses. We supply acknowledged brand-name products – custom-built wall and floor panels – for the construction of road and rail-bound vehicles. In addition, we also supply special panels for industrial plants.
These products are also subject to continuous technological development, benefiting from the fact that we can develop and produce all the required glues, resins and films in-house. | | |
 |
Welcome to the world of doors!
Innovative product development, reliability in quality and service, and aesthetic design – that is the key to the continuing success of doors and frames from Westag & Getalit. | | |
|
|
|
|
Westfalia Separator Food Tec GmbH
|
|
 |
Separators
Separators in a neutralization line for edible oils. | | |
 |
Skimming separators
Skimming separators for a capacity of 60m³/h. | | |
|
|
|
|
Weyhmüller Verpackungstechnik GmbH
|
|
 |
flat cone machine
flat cone machine | | |
 |
Machines
The WEYHMÜLLER CBU family of cup-making machines | | |
 |
Our products
Know-how and Service are the two pillars on which our products are based. For more than 60 years now, we have been supplying standard machines, from those for manufacturing paper cups, ice-cream cones and drinking cones through desto machines (combination of plastic and paper) - a wide range of products. In addition, we also have the know-how to satisfy any special wishes of our customers. | | |
|
|
|
|
Wezag GmbH
|
|
 |
crimping hand tools
crimping hand tools | | |
 |
crimping machines
crimping machines | | |
 |
Cutting tools
The different variations of the series SH are applicable to different materials, cross sections and dimensions | | |
 |
Electric crimping units
Electric crimping units | | |
|
|
|
|
WhizCut of Sweden AB
|
|
 |
Carbide Insert Boring Bars
Carbide Insert Boring Bars | | |
 |
Precision Cutting Tools for CNC Swiss type Automatic Lathes
Precision Cutting Tools for CNC Swiss type Automatic Lathes | | |
 |
Toolholder for Turning and Copyturning
Toolholder for Turning and Copyturning | | |
 |
WhizIn Tool Holders for Automatic Lathes
WhizIn Tool Holders for Automatic Lathes | | |
|
|
|
|
Widmann Maschinen Vertriebs−GmbH
|
|
 |
Ultrasonic Sealing Machine
HS 300 US
for the production of ultrasonic sealed pockets, CD pockets, pocktes for coins, photos stamps, index pockets, cases etc. out of flat film rolls
| | |
|
|
|
|
Widos Wilhelm Dommer Söhne GmbH
|
|
 |
Building-site welding machines for pipeline construction
The extraordinary quality of these machines is managed by means of fully developed technology and a robust construction. The latest modifications to all types are the excavation mechanism at the basic machine, the digital manometer at the hydraulic aggregate resp. the possibility of conversion to a 3-ring repairing machine. The WIDOS building-kit system makes it possible to exchange the hydraulic units and the reducer inserts.
WIDOS 4400 (50 - 160 mm) / 4600 (75 - 250 mm) / 4900 (90 - 315 mm)
WIDOS 5100 (200 - 450 mm) / 5500 (200 - 500 mm) / 6100 (315 - 630 mm)
WIDOS HRG 3, 4, 6, 8, 10, 12, 14, 16, 18 (200 - 1800 mm)
WIDOS 8000/10000/12000/14000/16000/18000/20000 (up to 2000 mm)
WIDOS extension kit for automatic heating element
WIDOS rollerstands
| | |
 |
CNC-controlled building-site welding machines
Safe and controlled welding with a constantly high quality. With continuous control of way, pressure and temperature.
WIDOS 4400 CNC (50 - 160 mm)
WIDOS 4600 CNC (75 - 250 mm)
WIDOS 4900 CNC (90 - 315 mm)
WIDOS 5100 CNC (200 - 450 mm)
WIDOS 5500 CNC (200 - 500 mm)
WIDOS 6100 CNC (315 - 630 mm)
WIDOS 8000 CNC (450 - 800 mm)
WIDOS 10000 CNC (500 - 1000 mm)
WIDOS 12000 CNC (800 - 1200 mm)
| | |
 |
Devices for welding seam processing
By means of the inside and outside debeaders, the weld beads can be removed without any difficulties without damaging the pipe wall.
WIDOS inside debeader (50 - 500 mm), non-heated
WIDOS outside debeader (20 - 1000 mm)
| | |
 |
Sheet welding machines
Manual welding machine for the processing of sheets out of polyolefines by means of heating element butt or angle welding. | | |
 |
Socket welding machines for plumbers and constructors of pre-fabrication and installation plants
A simple and solid construction characterizes these devices. They are controlled by a rack-and-pinion mechanism.
WIDOS 75 (20 - 75 mm)
WIDOS 3500 (20 - 125 mm)
WIDOS 3600 (4" - 6")
WIDOS 2500 combi (20 - 125 mm)
| | |
 |
SPA Weld Log Recorder
Easy weld log recording of heating element butt welds. | | |
 |
welding machines
welding machines for plumbers and construction | | |
 |
workshop welding machines
workshop welding machines for fitting production | | |
|
|
|
|
Wieland Apparatebau GmbH
|
|
 |
Chamber furnaces
Chamber furnaces | | |
 |
Continuous dryers
Continuous dryers | | |
 |
Conveyor technology
Conveyor technology | | |
 |
Drying plants (Dryers)
Drying plants (Dryers) | | |
|
|
|
|
Willy Vogel AG
|
|
 |
components for centralized lubrication systems
components for centralized lubrication systems | | |
 |
Centralised lubrication systems
Centralised lubrication systems feed lubricant from a central source to the points on a machine or machining system at which friction occurs.. In this way, undesired wear is minimised and sometimes some of the heat generated by the friction is dissipated with the help of the lubricant.
VOGEL centralised lubrication systems are practically maintenance-free. Maintenance is limited to refilling the lubrication reservoir and occasional visual inspection of the connected lubrication points.
Centralised lubrication systems are divided up into total loss and circulating lubrication systems.
Minimal quantity lubrication systems (MQL) are used mainly in modern production processes.
| | |
 |
Piston pump unit for multiline grease lubrication Click on image to enlarge
Feed pumps feed lubricant from the lubricant reservoir into the tubing system of the centralised lubrication system.
The manometric pressure has to be high enough to compensate for pressure drops in the tubing, components (filters, valves, distributors) and friction points.
Criteria for the selection of feed pumps
Type of centralised lubrication system
Total loss lubrication system, circulating lubrication system
Quantities required by the system
cm3 per delivery stroke, cm3/min or l/min
Lubricant
oil, fluid grease, grease
Pressure ranges
Low pressure up to 1 MPa, intermediate pressure up to 5 MPa, high pressure up to 40 MPa
Temperature ranges
–25 to +80 °C (e.g. automotive sector)
0 to +40 °C (e.g. industrial sector)
–20 to +80 °C (e.g. chain lubrication)
| | |
 |
spendau pumps
spendau pumps | | |
|
|
|
|
Wilson Tool International Ltd.
|
|
 |
press brake tooling
press brake tooling | | |
 |
x-sharp
x-sharp | | |
 |
accessories
accessories | | |
 |
punch press tooling
punch press tooling | | |
|
|
|
|
Winbro Group Technologies
|
|
 |
CNC electrical discharge machining (EDM) center
CNC electrical discharge machining (EDM) center | | |
 |
CNC laser machining center
CNC laser machining center | | |
 |
Electrochemical machining (ECM) machine
Electrochemical machining (ECM) machine | | |
 |
HSM - High Speed EDM Milling
Winbros’ acclaimed HSD6 machine in its latest MK-III incarnation, has been specially developed for the machining of aero and IGT turbine blades, vanes, segments and similarly sized components. | | |
 |
Laser Drilling
Winbros’ LMC Laser machine has been designed to machine blades, vanes and similar sized components. The LMC system can be configured to allow fitting of the most suitable Laser for the application, the four Laser types generally used are Pulsed High Peak Power Nd:YAG, predominantly for drilling, Continuous Wave CO2 or Fibre Laser for cutting, cladding and welding and High frequency Diode Pumped Nd:YAG for ablation. | | |
 |
STEM Drilling
Winbros’ SD1-A drilling machine have been designed for the drilling of IGT axial cooling holes.
Some of the features of the machine include:
Single or three axis system
1000 amp power supply
High speed polarity switching
Integrated acid system
4 channel acid delivery
Heidenhain control system
Closed loop pressure control
Large work area | | |
|
|
|
|
Wodschow & Co.A/S
|
|
 |
10L - table
10L - table mixer | | |
 |
AR40 Pizza model
Floor mixer with 40 L (40/20 L) bowl and impact-resistant surface. The AR40 Pizza is always on hand to help, be it with kneading, stirring or whipping.
The AR40 Pizza has a more powerful motor which enables the machine to mix up to 24 kg yeast dough (50%) compared to the 18 kg handled by the standard version.
| | |
 |
BEAR Varimixer 20L
BEAR Varimixer 20L | | |
 |
Blenders, Mixers and Forming Equipment
Blenders, Mixers and Forming Equipment | | |
 |
Meat Mincer
Quality meat mincer in stainless steel with a diameter of 62 mm. In order to achieve the highest performance of the mincing process, the walls of the housing are twisted.
The meat mincer is delivered complete with one knife and one disc (with 4 mm holes). | | |
 |
Vegetable cutter, 3VC
Quality vegetable cutter in stainless steel.
This vegetable cutter is very reliable in operation for slicing, cutting and shredding of all types of vegetables as well as bread, fruit and nuts.
It is also well suited for production of french fries.
The vegetable cutter is very simple in its construction and consists of few parts, which makes it very easy to clean.
The vegetable cutter is delivered complete with 4 discs and plunger.
| | |
|
|
|
|
Wohlenberg Werkzeugmaschinen Gmbh
|
|
 |
CNC - Machining Center PC 4
CNC - Machining Center PC 4 with machining tower and tool changing palettes | | |
 |
CNC - Turning Lathes - Type PT
CNC - Turning lathe PT1 - II | | |
 |
Deep Hole Boring Machines - Type PB
CNC - Deep Hole Boring Machine PB 2 | | |
|
|
|
|
Wolf Blechverarbeitung
|
|
 |
Cladding of Tubes
According to your specifications, our technical experts will manufacture claddings and casings for complex industrial plants using our computer-controlled sheet metal processing machines. | | |
|
|
|
|
WOLF Gruppe
|
|
 |
Mold and tool construction
Today we would like to introduce the latest branch of our company to you, the Wolf mold and tool construction sector.
To meet our own with high demands as a system deliverer, we have added the Wolf mold and tool construction sector to our Wolf group.
The main focus of our tool building section is the production of plastic die casting tools, as well as forming and punching tools. A special task of our company is the production of prototypes that are close to production in very short time. Furthermore, we are ideally equipped to produce cavities for crank shafts for cars and lorries.
| | |
 |
tool technology
tool technology | | |
 |
WOLF coating technology LLC
In our coating centre, it is extremely important for us, to offer our customers an individual consultation, as well as a competent support of our customers.
In a tight co-operation with our customers, we develop and modify our layers, for the concrete needs of our customers.
The goal of all our efforts is an individual coating of tools and high precision parts, that is especially fitted to the needs of the customer.
| | |
|
|
|
|
Wolfangel GmbH
|
|
 |
Compressed Air Angle Grinder DLWS 110
Operating Pressure: 6 bar
Air Consumption: 350 l/min
Speed: 12,000 1/min
Diameter holding attachment: 16 mm
Weight: 1.8 kg
| | |
 |
Dosing Unit
Wall Mounted Dosing Unit | | |
 |
Grinding Discs
Grinding materials play an especially important role in mould construction. Defined upper surfaces will be produced through the corresponding application. Our experience of many years is also available in the selection of the correct discs.
| | |
 |
Standard Injection Plant
Standard Injection Plant for quantities up to 5 kg-min | | |
|
|
|
|
WOMA Apparatebau GmbH
|
|
 |
Accessories
The accessory programme contains an extraordinarily wide range of high-pressure hoses, valves, nozzle carrier heads with different drives, nozzles for any application, guiding and positioning devices as well as accessory for water-abrasive blasting | | |
 |
Pumps
High-pressure plunger pumps for operating pressures up to 3000 bar. Millennium-line with HVC®-technique. ARP®-line for the use of abrasive containing water. Compact pumps in Y-design. | | |
 |
Tools
The unique tool programme for high-pressure applications includes guns, lances, mechanical tools, tools to clean pipes, tube bundles and tanks, as well as abrasive water jet tools for on-site cutting and demolition. | | |
 |
Units, Systems and Compact Units
High-pressure units for any industrial application. All systems can be driven by combustion engines or electric motors, respectively. They can be used in a stationary mode or on-site. | | |
|
|
|
|
WSW Wälzlager Wolfgang Streich GmbH & Co.
|
|
 |
Ball joints
Ball joints | | |
 |
Hydraulic rod ends
Hydraulic rod ends | | |
 |
Slide bearing bushes
Slide bearing bushes | | |
 |
Spherical plain bearings
Spherical plain bearings | | |
|
|
|
|
WTO GmbH
|
|
 |
Cycle Controled lathes
Cycle Controled lathes | | |
 |
Multiple Spindle
Multiple Spindle | | |
 |
Toolholder
Static Toolholder | | |
|
|
|
|
WTT A/S Wood Treatment Technology
|
|
 |
WTT - ENERGY VACUUM DRYER
WTT - ENERGY VACUUM DRYER
• Turnkey drying plant tested in our
factory for placement in the open
air.
• Approved quality with work test
certificate, construction in CE
standard.
• Up to 24 months' guarantee.
• Fully integrated and insulated pump
and technique room
• Energy system with integrated
additional heating system without
the need for connection of water
and heating
• Heat treatment for export
packaging timber with data
documentation.
• Automatic PLC control with optional
graphics software under WIN
98/2000/XP
• Ready-made transport and
operation system, complete with
rails.
In short – we offer you an all-in-one-hand solution:
Manufacturing – Transportation – Installation – Start-up – Guarantee – Service
| | |
 |
WTT - PRESSURE IMPREGNATION PLANTS
Impregnation of sawn and round
timber
• Effective volume from 5 to 100 m3
In order to ensure a long life span of the impregnated timber, the special type of timber and its construction is of the utmost importance.
Chemical timber preservation is recommended where the type of timber and its inherent characteristics cannot protect it from attacks of heart rot, dry rot and insects.
The correct combination of type of timber, construction and chemical timber preservation can ensure the timber a lifetime of up to 40 years.
• The hardwood has a natural
self-protection, and through the
surrounding impregnated sapwood
the protection is even higher.
• The wood preservative is applied to
the timber under vacuum and
pressure. The preservative is fixed
in the wood and cannot be washed
out.
• Colour pigment can be mixed with
the wood preservative when other
colours, in stead of the usual green,
for instance brown, are required.
• Impregnated timber is
environment-friendly. The wood
preservative that is used today in
the vacuum/pressure process is
environment-friendly, clean and
odourless and is normally
quality-supervised
IMPREGNATION
• Initial vacuum, the first phase of the
impregnation process ventilates
the wood cells and improves the
penetration of wood preservative.
• At a pressure of up to 13 bars the
wood preservative is applied to
the timber.
• Final vacuum, the final vacuum
phase of the impregnation process
absorbs the excess wood
preservative from the timber.
TURNKEY DELIVERY OF IMPREGNATION PLANT
• Turnkey impregnation plant tested in
our factory.
• Approved quality with work test
certificate, construction in CE
standard.
• Up to 24 months’ guarantee.
• Compact T10, integrated HD 606 and
big-sized T20 plants available
• Fully automatic, hydraulic
quick-locking door
• Compact turnkey plant with storage
tanks in 8 mm steel plates
• Storage tank with 30% higher
storage capacity than the pressure
vessel
• All aggregates installed on solid frame
• Water-cooled vacuum pump without
aerosols
• Fully automatic processes with
relay or computer control under
Windows
• Ready-made transport and operation
system, complete with rails.
• Steam fixation processes under
vacuum. Optional automatic dosing
and mixing device
• Hydraulic tilt of the autoclave for
improved dripping off
• Laboratory plants for research
institutes as well as renovation of
all makes of impregnation plants
In short – we offer you an all-in-one-hand solution:
Manufacturing – Transportation – Installation – Start-up – Guarantee – Service
IMPREGNATION PLANTS IN ALL SIZES
• Autoclaves with diameters of 1400,
1600, 1800, 2000, 2500 and
3000mm
• Autoclaves in standard lengths of
6000, 9000, 12000, 15000, 18000,
21000, 24000, 27000 and 30000mm.
Special lengths available upon
request.
REQUIREMENTS AT YOUR BUILDING SITE
• Concrete foundation, rails in front of the plant,
building above the autoclave
• Crane for unloading
• Connections to electricity and water.
| | |
 |
WTT - SSV VACUUM DRYER
WTT - SSV VACUUM DRYER
• Quality in its essence
• Effective volume from
5 to 260 m3
Since 1985 the SSV vacuum dryer has been successfully in operation in all fields of the wood industry. The process advantages are numerous:
• Quick-drying of drying-resistible
wood types , e.g. 65mm oak from
40-10% in 288 hours.
• Bigger dimensions , e.g. 120mm
spruce/construction timber from
80-15% in 96 hours.
• Strain-free drying , e.g. beech
parquet 33mm from 80-6% in 144
hours.
• Value for money: 3 – 8 times
faster than conventional dryers.
• Natural colours of wood
maintained , e.g . beech, maple,
ash and birch .
• Uniform colouring, e. g. of oak
• No cracks or mould, due to 100%
oxygen-free drying.
TURNKEY DELIVERY OF VACUUM DRYER
WTT - SSV VACUUM DRYER
• Turnkey drying plant tested in our
factory for placement in the open
air.
• Approved quality with work test
certificate, construction in CE
standard.
• Up to 24 months' guarantee.
• Fully integrated and insulated
pump and technique room - as
option with heating unit, oil tanks
and chimney.
• Heat treatment for export
packaging timber with data
documentation.
• Automatic PLC control with
optional graphics software under
WIN 98/2000/XP
• Ready-made transport and
operation system - complete with
rails.
In short – we offer you an all-in-one-hand solution:
Manufacturing – Transportation – Installation – Start-up – Guarantee – Service
VAKUUM DRYERS IN ALL SIZES
• Stainless steel autoclaves with
diameters of 2200, 2600, 3000,
3500, 4000 and 4250mm
• Stainless steel autoclaves in
standard lengths of 6000, 9000,
12000, 15000, 18000, 21000,
24000, 27000 and 30000mm.
Special lengths available upon
request.
REQUIREMENTS AT YOUR BUILDING SITE
• Foundation under the autoclave
• Crane for unloading
• Connections to electricity, water,
wastewater, and heating.
| | |
 |
WTT - VACUUM DRYER WITH "SMOKING" EQUIPMENT
Noble and dark wood colours by new WTT procedure
Veneers, boards and even strong and massive wood planks are thoroughly coloured by a completely new procedure for treatment of tannin-bearing timber.
Wood species especially suited for this treatment are oak and acacia.
The technical equipment needed for this process is supplied as additional device for the WTT vacuum drying plant, whereby "smoking" with ammonia is accomplished in an additional step to the drying process. The obvious advantage of this concept is that the plant is capable of operating with this special treatment while being fully functional as one of our traditional vacuum dryers as well.
Even thick oak planks (65mm) are through-coloured perfectly within approximately two weeks. This should be seen in contrast to existing smoking systems that with the double time consumption are capable only of colour penetrating a few millimetres into the timber.
A further substantial advantage of the WTT "smoke"-drying procedure can be found in a completely new subsequent treatment procedure whereby a smell-free wood product is available immediately at the end of the treatment. Until now it has been necessary to store the smoke-treated timber several weeks in buildings equipped with costly air purification systems.
Implementation of the newest technology ensures that all requirements regarding impact to the surrounding air and water are met immediately, as is the case with requirements to operational and industrial safety. Thus only short time is needed to obtain the operation permit of this plant type.
The first two vacuum drying plants equipped with the smoking feature were taken into use recently by a German oak wood and veneers specialist.
| | |
|
|
|
|
WMH TOOL GROUP AG
|
|
 |
JDS-12 Disc Sander
Disc Sander | | |
 |
JSG-96 Combination Disc-Belt Sander
Combination Disc-Belt Sander | | |
 |
JTS-250CS Circular Saw
Circular Saw | | |
 |
JTS-315S Construction Saw
Construction Saw | | |
|
|
|
|
WIXROYD INTERNATIONAL LTD
|
|
 |
Ball End Thrust Screws
Ball End Thrust Screws | | |
 |
Clamps
Clamps
| | |
|
|
|
|
Winkler+Dünnebier AG
|
|
 |
Cutting
Depending on your needs, the materials to be processed and the lifetimes requested - the most optimum cutting system.
| | |
 |
Embossing
On the basis of W+D technologies a wide variety of embossing devices for various applications. | | |
 |
High Speed Envelope Machine W+D 102 RE
High Speed Envelope Machine W+D 102 RE | | |
 |
Modular flexo print stand
Modular flexo print stand | | |
 |
Rotary cutter W+D 400
Rotary cutter W+D 400 | | |
|
|
|
|
Winterthur Technology Ltd
|
|
 |
Abrasive belt
Abrasive belt | | |
 |
Diamond dresser
Diamond dresser | | |
 |
Flexible cut-off wheel.
Cutting-off Wheels and Rough Grinding Wheels
Type T41
Type T42
Type T27
Type T29
Cutting-off Wheels RAPOFLEX Super + Extra
Cutting-off Wheels RAPOFLEX Super Light
Cutting-off Wheels RAPOFLEX Extra Light
Rough Grinding Wheels RAPOFLEX Super Extra
Cutting-off Wheels for Foundry Industry
Cutting-off Wheels for Cutting Stones
Cutting-off Wheels for Deburring
Sharpening and Cutting-off with Non-reinforced Wheels
Cutting-off Wheels 300 - 350 for Offhand Grinding
Cutting-off Wheels 250 - 500 for Stationary Machines
Large Cut-off Wheels 600 - 2000 mm
Large Cut-off Wheels for Warm- and Hot-cutting
Ronden | | |
|
|
|
|
Wipotec GmbH
|
|
 |
multi track application
multi track application | | |
 |
weighing of coins
weighing of coins | | |
|
|
|
|
Witels Apparate-Maschinen Albert GmbH
|
|
 |
Drive units
Drive units | | |
 |
Guides
Guides | | |
 |
Straightener for strip
Straightener for strip
| | |
|
|
|
|
WITT Gasetechnik GmbH & Co. KG
|
|
 |
Gas Analysers
WITT analysers are available as stationary or portable units for different types of gases and areas of application. Depending on type of application, they can be supplied separately or integrated with mixing systems. For local or remote monitoring and control extensive sensor technology and electronics are available. WITT are happy to design and build equipment to meet special requirements. | | |
 |
Gas Mixers
WITT gas mixers are available as mechanical or electronic systems for different types of gases, capacity ranges and areas of application. The gas mixtures produced are either variable or pre-set. For local or remote monitoring and control extensive sensor technology and electronics are available. Gas mixers are also supplied with integrated analysers. WITT are happy to design and build equipment to meet special requirements.
| | |
 |
WITT SAFETY VALVES
Spring-loaded, direct action relief valves for venting excess gases from pipelines and other equipment. | | |
|
|
|
|
Wittenbauer GmbH
|
|
 |
Robotic fitting system
Robotic fitting system for vehicle front axle assembly | | |
|
|
|
|
Wittmann Robot Systeme GmbH
|
|
 |
7-Series Pneumatic Robots
"Pick and Place" Robots:
The economic solution providing high performance at affordable prices for smaller molding machines up to 150 tons locking force.
| | |
 |
7-Series Robots
Integrated Control Cabinet
Use of state-of-the-art compact servo modules integrated on the robot itself eliminates the need for an external control cabinet. The integrated control cabinet is mounted behind the horizontal axis for valuable space savings in the molding shop.
Advantages:
Short motor and encoder cables
Less cables and connections to fail
Highest reliability of robot operation
| | |
 |
DOSIMAX Blenders
Volumetric Dosing Systems
Continuous output from 70 g/h to 180 kg/h. | | |
 |
Palletizing Solutions
Palletizing routines are commonly used and their support is optimized in WITTMANN's robot control systems CNC 6.2 and R7. Special palletizing programs provided by the control system minimize user entries and perform multiple background calculations. The interconnection of various routines allows the setup of complicated palletizing patterns. The variable setting of second and last palletizing position and per axis and the customization of axis orders allow unlimited program-flexibility. | | |
 |
W702 Sprue Picker
For the removal of sprues and parts from an injection molding machine. The solid construction allows fast movements with low vibration for precise removal. | | |
 |
W733 - W743 With Telescopic Vertical Arm
Low overall height - double speed
All larger robots starting from model W733 are equipped as standard with our patented telescopic vertical arm.
The main vertical arm is driven via rack and pinion. A belt drives the front arm at double speed.
| | |
|
|
|
|
WITZENMANN GmbH
|
|
 |
Axial Expansion Joints
Axial Expansion Joints | | |
 |
Metal Bellows
Metal Bellows | | |
 |
Pressure hoses
Pressure hoses | | |
|
|
|
|
Witzig & Frank GmbH
|
|
 |
DUE-series
High-precision, progressive, user-friendly, safe and authentic VDF-quality -
These are the properties of the conventional lathes of the VDF-DUE-series.
| | |
 |
DUS 1600 TI - Cycle controlled turning machine
MAG Boehringer is expanding its machine program with the new DUS 1600 TI. Workpieces up to 1600 mm turning diameter and 12,000 mm turning length can be machined to the well-known MAG Boehringer quality standards. C- and Y-axis for complete machining in one clamping are available. | | |
 |
machining centers and transfer
machining centers and transfer
lines for workpieces with high quality and productivity requirements.
TURMAT:
Multi-way rotary transfer machine for flexible automated manufacturing
LSA:
Multi-way production cell for 3-sided machining in one clamping
TRIFLEX:
Modular multi-station CNC machining center
TWINFLEX:
Multi-spindle two station CNC machining center for 5 axis machining
TWINFLEX MD:
Four spindles, two stations CNC machining center
| | |
 |
Multiple technology machining center XG 242
With its vertical design, high technological flexibility, multiple spindle design and an innovative drive concept the XG series can provide the most comprehensive turning solutions. All axes are directly driven and, for the first time, linear motors, which have a considerable influence on the machine dynamics, are used for the X-axes. The patented triangular X-slide allows completely independent or parallel machining in small spaces. | | |
 |
Special Machines for Coldforming of Profile
Worldwide, MAG Powertrain Coldforming Machines are synonymous with top productivity, quality and reliability when it comes to the manufacturing of straight and angular serrations, oil grooves, threads, etc. Our unique experience enables us to provide the most economical solution to specific production requirements. | | |
|
|
|
|
Wuppermann Stahl GmbH
|
|
 |
Complete solution
Over the years, we have developed into a system supplier for complex components. Today, the brand Wtec stands for absolute excellence in the production of high-grade metal components
We can step in at a very early stage of product development with consultancy services and support you all the way with our know-how. We simulate production sequences for you and provide detailed production engineering to ensure an optimal solution to your tasks in component manufacture.
By selection of the most efficient method of manufacture, by IT-supported production sequencing and control, and by optimal logistics, we ensure that a highly competitive product is available on the spot and just-in-time.
| | |
 |
Flat Rolled Steel
Hot-dip galvanized strip
Slit coils
Hot rolled coils | | |
 |
Sheet Metal working componets
When it comes to demanding, complex components, a partner that has mastered the whole spectrum of today's manufacturing techniques from edging and bending to welding and laser cutting can be a decisive advantage. Our customers are used to benefiting from our vast experience in the working of steel, alloyed steel, aluminium, nonferrous metals, glass, and ceramic materials.
To be successful in today's highly competitive environment, the availability of reliable process technologies with a clear and transparent cost structure is needed. | | |
 |
Tube and sheet metal products
Tubes
Slotted tubes for standard systems
Processed tubes
Tube components | | |
|
|
|
|
Wenzel Präzision GmbH
|
|
 |
Bridge Machine | X-Orbit
The XOrbit combines the concentration of essential features, experience of Wenzel with top mechanical engineering in a budget form.
The CNC bridge measuring machine is best suited for quick inspection tasks in production, receiving areas and for classic quality assurance. | | |
 |
Horizontal-arm Machines | RS / RSD Plus
The RSplus is a roller-bearing, high-performance coordinate measuring machine. The RSplus does not require a separate foundation, so it can be used in the most locations.
A particularly high measuring efficiency can be achieved by the simultaneous application of several measuring units. Larger measuring volumes are possible by combining multiple measuring units.
| | |
 |
Mythos01
Mythos01 | | |
 |
SMART CMM
SMART CMM | | |
|
|
|
|
W + K IndustrieTechnik GmbH & Co. KG
|
|
 |
Building Component Technology
Sandwich Panel Production Lines
Wall and Roof Cladding
Sandwich Panel Production Lines
Construction of Cold Stores
Sandwich Panel Production Lines
Sectional Doors
Strip Profiling Installations
Profiling Tools
| | |
 |
Pipe Mill Technology
Spiral Pipe Welding Machines -
Conventional Production Process
Spiral Pipe Forming and Tack-Welding Machines -
Two-Step Production Process (System HOESCH)
Submerged-Arc Final Welding Stands
Machines and Installations for Spiral Pipe Mill Finishing Lines
Advantages of the Spiral Pipe Production and Application of Spiral Pipes
HF-Longitudinal Welded Pipe Plants
Machines and Installations for HF-Longitudinal Welded Pipe Finishing Lines
Plants for the Polyethylene Pipe Outside Coating
Equipment for the Production of Tubing / Casing | | |
 |
Sandwich Panel Production Lines Wall and Roof Cladding
W + K IndustrieTechnik supplies components and complete production lines for the continuous production of sandwich panels with PUR/PIR-foam core or mineral wool.
Sandwich panels are used as prefabricated building components in pretentious industrial buildings.
W + K IndustrieTechnik offers different plant concepts, which can be adapted to the customers' individual wishes:
Technical Plant Data:
Panel Thickness: 40 mm - 120 mm
Panel Width: 500 mm - 1,000 mm
PUR-Foam System: 5 Components
Production Speed: 1.0 m/min. - 15.0 m/min.
Coil Weight: max. 10 tons
Facings: Steel / Aluminium
Material Thickness: 0.5 mm - 1.0 mm
Panel Design: Wall and Roof acc. to customers' specifications
| | |
 |
Spiral Pipe Welding Machines
Spiral Pipe Welding Machines
Conventional process
W + K IndustrieTechnik supplies machines and plants for the conventional spiral pipe production.
In the conventional production process, the pipes are formed in the spiral pipe welding machine and are simultaneously final-welded by means of multiple wire submerged-arc welding.
| | |
|
|
|
|
Walki Wisa Group
|
|
 |
Reel End Discs
Walki produces outer reel end discs and a special inner reel end disc.
WALKI®Disc Jumbo
WALKI®Disc Jumbo is a inner reel end disc especially developed for to protect big so called Jumbo-reels. The disc is a sandwich construction of pieces of paper between two paper webs.
WALKI®Disc Jumbo manages heavy loads and moisture without any risk of collapsing.
WALKI®Disc Fric
WALKI®Disc Fric outer reel end discs are available in different qualities: PE-coated testliner, kraftliner or board.
| | |
 |
Reel Wrap
The function of the reel wrapper is to give mechanical protection, moisture protection and to protect the paper and board reels from dirt and other hygiene hazards.
WALKI®Reel reel wrappers from Walki Wisa are tailor made to give maximum protection.
WALKI®Reel reel wrappers are available both as traditional paper-PE-paper laminates as well as specially designed wrappers for the so called hot-pack process.
Mechanical protection
The required level of protection depends on:
- Paper grade and size of the paper reels.
- Transportation modes: Type of vehicle, length of the journey, climate conditions and number of reel handling operations.
The WALKI®Reel family reel wraps are produced at five different performance levels.
Moisture protection
The function of the barrier layer in the reel wrap is to protect the wrapped material from changes in the humidity during transportation and storage. With the right level of moisture protection the wrapped reels will keep their original moisture level.
Printing
A printed reel wrapper gives an identity to the reel packaging and a possibility to promote brand names etc.
A printed reel wrapper will also have a positive effect on safety: For example, right print design makes it easy even at poor light conditions to see how many reels are stored on top of each other.
Recycling
WALKI®Reel confirms with the EU Packaging and packaging Waste Directice 94/62/EC and fulfils the requirements for packaging material recoverable by material recycling and packaging material recoverable in the form of energy recovery. | | |
|
|
|
|
WALTER AG
|
|
 |
Adapters
Walter adapteor systems offer maximum precision and reliability. With a wide range of connection adaptors for almost any application, they ensure optimum stability with maximum flexibility and freedom of movement.
Here, you will find a selection of Walter Capto and Walter NC clamping units and adaptors, including HSK adaptors and ScrewFit systems. | | |
 |
drilling.
drilling. | | |
 |
milling
milling | | |
 |
Standard reamer with parallel shank
Standard reamers with parallel shank and guide pads (solid carbide + cermet) for all common dimensions in H6 tolerance, for through-hole and blind-hole boring with a defined selection of cutting plate geometries for all common workpiece materials. | | |
|
|
|
|
Walter Kames Maschinen-Vertriebs-GmbH
|
|
 |
drilling tools
drilling tools | | |
 |
milling
milling | | |
|
|
|
|
Walter Surface Technologies
|
|
 |
Abrasives for the Metal Working Fabricating and Metal Finishing Industries
WALTER is commited to supply high productivity abrasives that will help you work better. Whether in general purpose grinding and cutting or specific job-matched applications, we offer performance based solutions for all your metal removal and surface finishing needs. Our commitment to reducing grinding and finishing costs is reflected in the quality and performance of all abrasives listed in this catalogue. | | |
 |
tooling
WALTER tooling is specially designed for use on portable power tools. As such it resists the high strains caused by tough operating conditions and allows you to take full advantage of your power tool's performance | | |
|
|
|
|
Walter+bai ag
|
|
 |
Customized Testing Systems
Specific testing tasks demand appropriate testing equipment!».
This is our motto. Therefore, besides our standard range of testing machines, we have developed hundreds of customized testing machines for static and dynamic material and component testing.
Testing Systems to Suit Your Specific Testing Needs!
Due to the extensive know-how in development and production of material testing systems as well as the modular design of our testing machines, electronics and application software, w+b can offer testing machines, test stands and testing systems according to your individual testing needs at cost-effective prices in w+b quality.
| | |
 |
Digital Controller & Material Testing Software
Modular digital controller for closed loop control in load-, displacement-, deformation or external mode and data acquisition. Specially designed for w+b testing machines to ensure accurate and repeatable results with the use of the latest digital technology
Digital Closed Loop Material Testing Controller
This high resolution controller is specially designed for static and dynamic testing up to 20 Hz in connection with w+b testing machines. Beside of many other features the controller include a digital hand wheel for easy test set-up. Enhances productivity is given by automatic crosshead return after specimens failure. All sensors are automatically recognised with integrated calibration.
| | |
 |
Dynamic Multipurpose Testing Systems
For static and dynamic tensile, compression or bending tests on materials, biomaterials, components and finished goods. | | |
 |
Static Universal Testing Machines
Ergonomical table-top Testing Machines for tensile, compression, bending, sheer or peel but also strain and other more advanced tests on a wide range of different materials. It combines high performance with compact dimensions. These machines offer force, displacement or deformation closed loop testing. | | |
|
|
|
|
WALTHER Spritz- und Lackiersysteme GmbH
|
|
 |
Complete systems
WALTHER PILOT supplies complete system solutions
Paint logistics and paint supply systems
Two-component metering systems
Application equipment
Overspray extraction systems
Ventilation and extraction systems
Process visualisation and control
We also develop tailor-made systems for clean-room requirements. | | |
 |
PILOT Vario
This spray gun for the finest surface finishes has an ergonomic design that makes it extremely comfortable to use, and weighing just 390 grams it is exceptionally light. The front part can be exchanged using a special tool. This is particularly useful when working with different material quantities, as the front part with a material connection (for pressure tanks or pumps) can quickly be replaced by a front part with a gravity flow cup connection. | | |
 |
PILOT WA 800
The new automatic spray guns of the PILOT WA 800 series are fitted with an adapter plate. This allows the guns to be quickly exchanged for maintenance purposes.
The front body is made entirely of stainless steel. The large material duct allows almost all types of material to be sprayed.
Weight | | |
|
|
|
|
Wamatech Aps
|
|
 |
waste separater
mixed kinds of waste separated and baled | | |
 |
paper in bales are easier to handle
paper in bales are easier to handle | | |
 |
The cleanest powdered rubber from tires
The cleanest powdered rubber from tires | | |
 |
Tires on their way to granulating
Tires on their way to granulating | | |
|
|
|
|
Wampfler AG
|
|
 |
Cable drag chains
Cable drag chains | | |
 |
Cable trucks
Cable trucks | | |
 |
Conductor rails
Conductor rails | | |
 |
Workplace equipment
Workplace equipment | | |
|
|
|
|
Wanner Technik GmbH
|
|
 |
Compact-Series
Granulators | | |
 |
Dynamic-Series
Granulators | | |
 |
The Baby - Series
The B06.08 granulator is designed for the granulation of small sprues. Typical applications are the granulation of CD sprues and small sprues from microinjection moulding.
The granulator type B06.08CD is specially designed for the granulation of CD sprues, while the modell B06.08S is designed for general microinjection moulding applications .
The cutting chamber of the B Series granulators including rotor and screen are made of stainless steel, to fulfill also high purity standards for regrind. In addition, the cutting chamber is hermetically sealed to prevent the regrind from being contaminated by incoming air or dust when extracted by suction. It is therefore possible to use this granulator
under clean room conditions, as is typical in CD production.
Both models granulate sprues at low speed. This ensures a virtually dust-free regrind as well as maintaining a very low noise level.
The optimized geometry of the V-formation scissors cut and the cascading, multi-level rotor is providing a very effective granulation process and therefore the power required
by the geared motor is reduced without compromising granulator efficiency.
The Baby Series offers the optimal solution for the granulation of small sprues for microinjection moulding and CD production.
| | |
 |
The Cutter
Cuttersystems - designed to chop massive edge trim into smaller pieces - are built to your special application and requirements.
We are able to provide cutter systems including conveyor and granulator, which will process massive edge trim into regrind according to your needs and specifications. | | |
 |
The Energy-Series
The new E-Series (Energy-Series) granulators are very suitable as powerful central granulators for the processing of sprues and failparts up to a throughput of 800 kg/hr (depending on the products, its material, geometry and screen size). Whether bulky or thin-walled parts, sprues/runners or extruded profiles, the E Series can effectively process them all. The resulting high quality, uniform granulate can be reused directly in subsequent production processes.
By standard, these granulators come with integrated sound enclosure and a special framework design to reduce structure born noise, thus qualifying these machines also for in-line applications in the production of large blow or injection moulded parts. The extensive actions taken to reduce noise and impact sound are lowering the stress on the operator.
The large doors on the front of the enclosure provide easy access to all main components, such as the cutting chamber, blower, etc., without the use of tools.
The knives can be pre-adjusted outside the cutting chamber by means of a gauge to ensure precise tolerances once the knives are re-installed. As with all Wanner granulators, the new E Series benefits from many outstanding features and proves to be good value for money. You will find the granulator's high performance, robust design and ease of use second to none.
| | |
 |
The Xtra Series
The special granulator for demanding users
The screenless type of crusher granulators of the Xtra Series are ideal for brittle plastic materials. With large primary crushers, plastic sprues and parts are pre-crushed before being broken down to a final size via the toothed rollers (available with 4 and 5 mm teeth) without screening. There are benefits compared with blade granulators with screen, in terms of regrind quality and use, particular with brittle materials. As a result, the noise level is lower when granulating massive sprues and the regrind has fewer fine parts when processing brittle plastics. The Xtra-Series machines are also very compact and easy to clean. The hardened cutting tools made from high quality steel alloys guarantee a long service life even when processing abrasive plastics. The screenless crusher granulators are available in different configurations and are easy to adapt to specific user requirements.
| | |
|
|
|
|
Walker Hagou Magnetics B.V.
|
|
 |
lifting magnets
lifting magnets | | |
 |
fine division electro magnetic chucks
fine division electro magnetic chucks | | |
 |
Workholding & Clamping
Walker Workholding and Clamping Electromagnetic, Electro Permanent and Permanent Magnetic Chucks are cost effective chucks for grinding, machining, milling, turning, EDM, and molding. | | |
|
|
|
|
Waldburg Forstmaschinen GmbH
|
|
 |
Cranes and other forest equipment
Cranes and other forest equipment • Harvesting machines • Skidding and cable logging • | | |
|
|
|
|
W&P Wolf & Partner GmbH
|
|
 |
Brazing Technologny
Brazing Technologny | | |
 |
Dosiersteuergeräte
Dosiersteuergeräte | | |
|
|
|
|
W. Fehlmann AG Maschinenfabrik
|
|
 |
PICOMAX 95
Vertical machining centre PICOMAX 95 | | |
 |
PICOMAX® 20
The P20 fulfills even the highest requirements for maximum precision and handiness of state-of-the-art workshops. They are used for drilling, thread cutting, and milling operations in the demanding prototype and tool production as well as for training purposes and thus form the solid basis for an up-to-date machine train. The proven machine conception is permanently further developed and refined and contributes to the efficient and precise production of mechanical components on more than 10'000 shopfloors every day. | | |
 |
PICOMAX® 55 CNC 2/3
Based on decades of experience in CNC machine tool building, our PICOMAX 55 CNC 2/3 and the PICOMAX 80 CNC 2/3 form a milestone come to flexibility, precision, and proven everyday application. By simply pressing a key, the operator switches from a 3-axes controlled CNC milling machine to a 2-axes controlled jig boring machine with manual quill.
Sophisticated machining processes as well as set-up work can be carried out manually in a time-saving way, while batch production is executed fully automatically, and - as an option - with automatic tool changer (ATC).
| | |
 |
PICOMAX® 60-M/HSC
Perfect surface at highest precision.
Combines the advantages of a precision milling machine with the dynamic of a HSC-(High Speed Cutting) milling machine.
With its compact and easy accessible design the PICOMAX 60 is suited in fact for every factory. This machine concept combines the qualities of a precision milling machine with the dynamics of a HSC-milling machine.
Available in different types and applicable for both, the universal milling machine (-M version) or the high speed cutting milling machine (-HSC version). The configurations of the machine result entirely from the user's expectations and requirements.
The solid and rigid machine base with its massive vertical supporting stand has been grated from the very beginning in such a way to match the 5-axes machining. Whether in precision mechanics, mould and die production or in machine construction: these machining centres accomplish most versatile applications due to our decade of experience and consistently refined machine concept.
The difference is just like as visible as perceptible and measurable.
| | |
|
|
|
|
W. L. Gore & Associates, Inc
|
|
 |
Filtration
GORE® Filtration Products provide optimum performance for the chemicals, metals, minerals, and energy industries in the form of low pressure drop, near zero emissions, and consistent flow rates. We focus on delivering optimum performance through system evaluation, troubleshooting, specific product design, proper application, installation consultation/management, and periodic lab evaluation.
| | |
 |
GORE™ Cover System Principle
Take just as much favourably priced nature as possible and as much intelligent technology as necessary. Or more precisely: GORE™ Cover technology.
It consists essentially of three components: aeration, control, and a tarpaulin. Brought together in a perfect balance, the three components interact to produce a unique, economical and reliable composting system. In order to provide the essential basic requirements for the aerobic microorganisms, medium pressure aerators are connected to either on-floor aeration pipes or to in-floor aeration ducts. The bigger the throughput of the plant, the more worthwhile the investment in aeration channels, allowing vehicular access and saving on staffing costs.
The aerators are controlled by means of oxygen and temperature parameters, for which the necessary data is obtained directly from the main body of the heap using stainless steel probes. The data is fed into the computer and stored there, documenting the course of the operation. Radio-remote monitoring of the controlled composting process is possible.
The material is first mechanically prepared and homogenised before being laid on the aeration using wheel loaders. The probes are then sunk into the material to be composted and then the GORE™ Cover is immediately pulled over the body of the heap. Various handling aids are available to make this action easier. It now remains only to fill the fire hose at the edge of the tarpaulin with water to fix it in position and within a few minutes an enclosed system is functioning.
Without the cost of any further technical maintenance and without producing any conspicious odours or microorganisms, Nature now sets to work. It is inexpensive and it is in perfect tune ecologically. Three to four weeks later you can open up the heap to find its contents have been thoroughly a decomposed degraded. All you have to do is roll back the tarpaulin onto the winding gear by radio remote control, remove the measuring probes, if necessary withdraw the aeration pipes using the wheel loaders, and place the material e.g. by a winch on the maturation field and to continue biodegradation. With the right equipment and our expertise you can save yourself the bother of watering, turning — and trouble with the neighbours.
Diagram of a Plant: Composting Technology With GORE™ Cover and Aeration (On-Floor and In-Floor)
Intelligent technology allows rapid organic decomposition with integrated protection against the weather and emissions. A plant of this kind can be installed anywhere in the world within just six weeks.
| | |
 |
GORE™ Surveys – Sampling Air, Soil, and Water
Accurate, Simple, Versatile, Economical, Proven
Inclusion of a GORE™ Survey will
Focus Sampling
Reduce Costs
Optimize Remediation
Achieve Site Closure Faster
GORE™ Surveys are used for
Accurate Site Assessments
Vapor Intrusion Investigations
Ground and Surface Water Sampling
Conceptual Site Model Development
Long-term Monitoring | | |
 |
GORE® REMEDIA® Catalytic Filtration Systems
W. L. Gore & Associates, Inc., the worldwide leader in filtration technologies, is proud to offer the most cost-effective way to meet dioxin and furan emission regulations. A simple replacement of your existing filters allows you to destroy dioxins and furans right in your baghouse. This award winning system, proven in over 30 applications worldwide, is effective and cost-efficient without requiring process changes or adding costly new equipment. Safer for the environment, safer for employees, simpler to use, the GORE® REMEDIA® Catalytic Filtration System is the simplest and most cost-effective way to meet dioxin regulations. | | |
|
|
|
|
W.T.Armatur GmbH & Co. KG
|
|
 |
Change-Over Valves / Type 11.7
Product description
Three-way change-over-valve with safety gland packing in flange design in accordance with EN 1092-1 and ASME B 16.5 respectively; can be supplied in carbon steel 1.0619 (WCB), stainless steel 1.4408 (CF8M) and low temperature steel 1.6220 (LCC).
Use
The use of change-over valves allows essential maintenance work to be carried out on a safety valve, without interruption of the plant operation, simply by changing over to the relevant stand by valve, thus protecting the plant against excessiv overpressure.
Plants are protected against undue excess pressure by switching over to the relevant standby safety valves. Full blow off capacity is maintained when the change-over-val |
| |
