|
|
|
Tyco Electronics AMP GmbH
|
|
 |
Distribution switch-box
A range of truly versatile MCB distribution board systems providing unobtrusive final circuit management solutions for applications up to 200A. The range offers robust TP&N and SP&N distribution boards with an extensive selection of MCBs, RCBOs, RCCBs, switch disconnectors, MCCBs, fuse switch incomers, service centres and modular control and command devices. | | |
 |
High voltage cable splice
Using its knowledge and experience in the field of material design, Raychem has pioneered some of the most important technical advances in cable accessory technology. Heat-shrinkable accessories are well accepted for medium-voltage distribution by utilities, equipment manufacturers and industrial users throughout the world. For fifteen years, accessories have also been available for 69kV, 72kV, 84kV transmission-voltages. For higher voltage classes we offer 145kV to 170kV prefabricated joints and terminations for indoor and outdoor switchgear and transformers | | |
 |
Insulated flexible conductor bar
Our range of connectors and fittings covers every application in an electrical network. We provide a full line of connectors and accessories for low, medium and high-voltage cable and overhead networks, substations, grounding applications, rail transport infrastructure, industrial applications and accessories for overhead optical fiber lines (OPGW and ADSS). We have established a first class reputation as experts in the design, testing and manufacture of these products.
| | |
 |
Low voltage surge arrester
Low Voltage Arresters provide protection for low voltage overhead lines, consumer in house supplies, distribution transformers and other systems. The MOV (Metal Oxide Varister) without series gap incorporated in the surge arrester reliably imposes low-value limits on surges caused by atmospheric overvoltages and switching transients, thus protection the insulation of the cumsumer side networks and equipment | | |
 |
Network Solutions
Network Solutions is a global supplier of infrastructure components for the telecommunications and energy markets. Our products include connectors, above- and below-ground enclosures, heat shrink tubing, cable accessories, surge arrestors, fiber optic cabling, copper cabling and racks for copper and fiber networks. | | |
 |
Porcelain insulator
Trading under the names Raychem, Axicom, Morlynn, Dulmison and Zibo, Tyco Electronics Energy Division offers a comprehensive range of porcelain, polymeric and hybrid solutions for the electricity supply industry. Experience in the design and manufacture of insulators exceeds 80 for porcelain, 30 years for polymeric and 20 years for hybrid products. The manufacturing processes employ some of the most advanced technologies in the field of insulator production. A commitment to quality is evidenced by independent certification of quality systems complying with international standards. | | |
 |
Thermal magnetic circuit breaker
Loadline Y-Frame MCCBs span a range of current ratings from 20A to 1600A in just 6 modular frame sizes. All electronic Y Frame devices comply with IEC 947-2 selectivity utilisation category B, and all frame sizes are complete with a full range of accessories including shunt trips, under voltage releases, auxiliary contacts, pre-trip alarm contacts, earth fault protection, motor operators, terminal covers, rotary handles and plug-in capability. The advanced technologies employed within the range ensure problems caused by harmonics, DC applications, temperature rise and discrimination / selectivity issues can be easily overcome by simple selection of the appropriate device. | | |
|
|
|
|
TOX Pressotechnik GmbH
|
|
 |
Column press
Column press | | |
 |
Joining Technique
the leading clinching system with many advantages:
economic - Clinching is significantly more cost efficient than spot welding
reliable - We guarantee joint strength values
versatile - Clinching is usable for numerous material combinations
environmentally friendly - Clinching is energy saving, clean, quiet
user oriented - TOX = technology + production equipment from one source
The TOX Joining Technique combines two closely related technologies, already well established and proven since many years in mass production, and finding new and innovative clinching applications every day in the sheet metal joining industry:
| | |
 |
Pneumatic press
Pneumatic press | | |
 |
Punching press
Punching press | | |
|
|
|
|
Torwegge Holzbearbeitungsmaschinen GmbH
|
|
 |
Door and door frame processing
Double End Tenoner for lock and lock hinge processing,
Door frame processing,
Machines for the production of door leaf blanks, | | |
 |
Double End Tenoner/Special solutions for wooden and non-wooden products
Angular Double End Tenoner Lines for large-size panels with transfer systems for:
Chipboard and MDF-panels
Plywood panels
Fibre panels
Gypsum panels
Laminates
etc. | | |
 |
Panel Machine
Honeycomb Panel Machine PWR 500 | | |
 |
Solid Lumber Double End Tenoner for
5-Piece-Doors
Crosswise window processing
Crosswise rail processing | | |
|
|
|
|
TORREDA-TORMADEX S.A
|
|
 |
HIDROPAL E
HIDROPAL E | | |
 |
LITORMATIC E5 Sanders
Distances available 1000/1200/1400/1600/1800/2000/2500
Maximum Diameter to turn 250
Num. of copys 1
Num. tenoning turrets 0
Num. of turrets 0
Loader / Magazine op
Ejector no
Centering device no
Tailstock HID
Spindle motor (hp) 5.5
Hidraulic motor pump (hp) 2
Stedy rest --
| | |
 |
MANUTOR ECO
Manul lathe, specially designed for small series or for the sanding of any post or baluster. It's economical price, robustness and reliability construction, simultaneously with a simple handling. makes imprecindible in any furniture shop that it requires of small series or sanding. | | |
 |
METOR UNIVERSAL
The Metor Universal it's the most economical machine for the professional stair builders or any turning manufacturer. Recognized worldwide for ti's low maintenance and Big capabilities. Also it's usefull options, as Twin copy's, Frontal copy head or the Twisting and flutting attachment give and unlimited capabilities too this entry level but heavy and well done lathe. | | |
 |
PALPATOR COLUMNS
PALPATOR COLUMNS | | |
 |
SALOMONIC
Distances available 1000/1200/1400/1600/1800/2000/2500
Maximum Diameter to turn 250
Num. of copys 1
Num. tenoning turrets 0
Num. of turrets 0
Loader / Magazine no
Ejector no
Centering device no
Tailstock HID
Spindle motor (hp) 5.5
Hidraulic motor pump (hp) 2
Stedy rest 160/90
| | |
|
|
|
|
TORNOS S.A.
|
|
 |
DECO 7-10a
NC automatic, single-spindle sliding headstock lathe
Capacity up to 10 mm | | |
 |
Micro 7
NC automatic, single-spindle sliding headstock lathes
Capacity up to 7 (8) mm | | |
 |
MULTIDECO 20/6b
Automatic, NC multispindle lathes
6 spindles
Capacity: 4-20 (24) mm (with preparation) | | |
 |
ROBOBAR SBF-210
Bar feeder for the DECO - single-spindle | | |
 |
SAS-16.6
Automatic, cam-operated multispindle lathes
and programmable 6-spindle controller
Capacity: 4-16 (17) mm | | |
 |
Sigma 20
NC automatic, single-spindle sliding headstock lathes
Capacity up to 20 (25.4) mm | | |
|
|
|
|
TopTier Palletizers Inc.
|
|
 |
Palletizes cases, bundles, and trays at 10-20 per minute
TT-H10/20
Palletizes cases, bundles, and trays at 10-20 per minute. Options include concurrent stretch wrapping, tie and slip sheet, pallet dispenser, and more. Compact footprint, and easy to use interface.
• Up to 50 different patterns stored
• Quick changeover between patterns
• Column or interlocked stacks
• Simple new pattern programming
• Redundant contact safety monitoring
• Touchscreen standard
| | |
 |
Palletizes cases, bundles, and trays at 8-20 per minute.
TT-L10/20
Palletizes cases, bundles, and trays at 8-20 per minute. Options include concurrent stretch wrapping, tie and slip sheet, pallet dispenser, and more. Compact footprint, and easy to use interface.
• Up to 50 different patterns stored
• Quick changeover between patterns
• Column or interlocked stacks
• Simple new pattern programming
• Redundant contact safety monitoring
• Touchscreen standard
| | |
 |
Palletizes cases, bundles, and trays at up to 50 per minute
TT-H50e
Palletizes cases, bundles, and trays at up to 50 per minute. Options include concurrent stretch wrapping, tie and slip sheet, pallet dispenser, and more. Compact footprint, and easy to use interface.
• Up to 50 different patterns stored
• Quick changeover between patterns
• Column or interlocked stacks
• Simple new pattern programming
• Redundant contact safety monitoring
• Touchscreen standard
| | |
 |
Palletizes cases, bundles, bags, buckets and trays at 30 per minute.
Palletizes cases, bundles, bags, buckets and trays at 30 per minute. Options include concurrent stretch wrapping, tie and slip sheet, pallet dispenser, and more. Compact footprint, and easy to use interface.
• Up to 50 different patterns stored
• Quick changeover between patterns
• Column or interlocked stacks
• Simple new pattern programming
• Redundant contact safety monitoring
• Touchscreen standard
Link to further Information | | |
 |
Stacker
TopTier’s new breakthrough line of entry-level palletizers provides fully-automated palletizing at a breakthrough price. The full-featured palletizer is designed to replace manual palletizing operations. The Stacker is easy to setup and operate using AB controls and color touchscreen. The compact 10’ x 12’ footprint includes palletizer, pallet dispenser, and full load exit. The Stacker builds any load at rates faster and more reliably than manual palletizing, and provides the industry’s first cost effective solution to manual loading.
• Rates: 10-20 CPM
• Infeed: Floor level
• Pallet Handling: Automatic pallet dispenser and full load exit
• Controls: EasyStack™ load building interface and color touchscreen HMI
• Safety: Category III enclosure
• Options: Automatic slip sheet inserter, layer clamping for different sized layer patterns
| | |
 |
Stretch-film wrapping machines
Palletizer Stretch Wrap Option
Internal stretch wrapping operates concurrently with layer building, with no impact on rates. All wrap settings are configured through EasyStack HMI touchscreen.
| | |
|
|
|
|
TOOL-TEMP AG
|
|
 |
Automatic cable cutting and crimping
Automatic cable cutting and crimping | | |
 |
Powder Coating Machine
Powder Coating Machine | | |
 |
TOOL-TEMP Units
TOOL-TEMP Units » Temperature control units » Pressurised water units | | |
 |
Welding Department.
Welding Department. | | |
|
|
|
|
Tonello Srl
|
|
 |
Barrier Washing Machines
The machine is located within a barrier wall and is specifically designed to wash polyester and polyester-cotton garments in an aseptic environment. Soiled garments are automatically loaded into the machine, from an overhead bag storage system or conveyor, via a hopper located on top of the machine.
Clean garments are unloaded through the main door directly into the clean room. The machine is equipped with a single motor variable speed drive system which may be programmed to suit particularl applications. It is controlled by a B&R industrial PC with Intel Celeron processor, 64 mb ram, compact flash 256 mb. LCDTFT display and modem for trouble-shooting and on-line assistance. Connection to the Tonello supervision system is am option via Ethernet.
The G1 130 E1 machine is particularly suited to washing protective garments used in controlled atmosphere environments (laboratories, pharmaceutical, medical device and semiconductor manufacturing, high quality paint spraying, food processing and other clean room
applications such as hospital operating theatres etc.)
| | |
 |
Dryers
E/12 - E/25 | | |
 |
dyeing machines
professional dyeing machines | | |
 |
Sampling Machines
G1 WM / DM Line | | |
 |
Used Look
Brush Robot E4 | | |
 |
Washer-Extractors
HS EV1 Line | | |
|
|
|
|
TMCI Padovan S.p.A., Newpack Division
|
|
 |
CARTON FILLING
Chemtech is the world’s leading supplier of systems for production of margarines, shortenings, bread improvers, bakery ingredients and cocoa/chocolate products. In addition to the well known Chemetator processing equipment, Chemtech designs and builds carton filling machines for "bag-in-box" systems.
The custom built Chempac Carton Filler machines have capacities up to 10 tonnes/hr and are usually designed to fill cartons from 5 to 25 kg. The machines are designed to meet individual customer’s needs with single or multiple fill stations, manual or automatic carton indexing, manual or automatic tare, no-box no-fill sensing etc. | | |
 |
Chemetator Scraped Surface Heat Exchanger
The Chemetator is a scraped surface heat exchanger ideal for many applications in the food, pharmaceutical and chemical industries. During operation, the product flows through a jacketed cylinder containing a rotating central shaft on which the scraper blades are mounted. These rotating blades continuously remove the product from the heat transfer tube.
The Chemetator is particularly suitable for the continuous processing of high viscosity and heat sensitive materials that cannot be handled efficiently using batch methods or conventional heat exchangers.
Increased Efficiency
The Chemetator features variable speed rotating scraper blades which clean the heat transfer surface several hundred times a minute. This ensures excellent product mixing and high heat transfer efficiency on a continuous basis. Product mixing can be improved still further with the use of an optional eccentric shaft.
Flexibility
The Chemetator will handle a wide range of heat sensitive and viscous materials at temperatures from –35ºC to 170ºC and operating pressures up to 120 bar
| | |
 |
FORM-FILL-SEAL
Newpack thermoforming machines are designed and manufactured according to the most advanced technologies, which allow them to strike a perfect balance between safety, respect for environmental regulations, hygiene and economical use.The Form-Fill-Seal Standard Machine starts with a reel of plastic material and forms in into containers, according to the chosen shapes. Then the machine automatically fills the container and seals the lid by thermo sealing.Its sturdy and reliable construction and low maintenance requirements allow to increase productivity and reduce labour employments, also thanks to operator-friendly diagnosis. The Form-Fill-Seal Standard Machine is available in its intermittent model and in its special continuous version. The patented continuous system ensures high output with minimal space between the product and lid inside the containers, thus reducing product oxidation and increasing the product’s shelf life. Without the problems of overflowing linked to most intermittent machines, accurate fill amounts, reliable seals and positive trimming can be easily accomplished.Aiming at optimizing the replacement of expendable supplies, Newpack has designed two systems to change films without wasting time and not requiring the machine to be stopped. | | |
 |
Universal automatic filling machine Mod. RAU 200 - RAU 300
This machine is able to fill jars and cans from 70 gr. to 5000 gr. with all kinds of fruit and vegetable without damage to the product. General characteristics: • stainless steel product collecting tank • slat feeder elevator in alimentary plastic material, with adjustable speed control system • stainless steel vibrating loader hopper with adjustable vibration control (L=1000 RAU 200; L=1500 RAU 300) • mechanical vibrators • straight-line can transporter with stainless steel chain and variable speed • the containers are vibrated during filling to allow the product to settle • adjustable vibration of the containers after filling • overfill control system with rotating brush and blower • return of the excess product to the feeding tank with belt in alimentary plastic • stainless steel frame • centralised greasing points • waterproof control panel for the machine and electrical circuit with low voltage switches • change over size easy made, without any extra equipment • the machine can be manufactured in right or left version Optional extras • feeder disks with Ø 1000mm spaces and stainless steel frame • automatic control system to minimise the • electric panel with plc and inverter product recycle for RAU 300 Technical characteristics • production - mod. RAU 200; 200 jars/1’ 500gr. - mod. RAU 300; 350 jars/1’ 500gr. • installed power - mod. RAU 200; 7,5 kw - mod. RAU 300; 12 kw | | |
|
|
|
|
Titech Visionsort
|
|
 |
TiTech AutoSort
With TiTech AutoSort, you are choosing the most flexible sorting system from our range of offerings. TiTech AutoSort combines NIR and VIS sensors into a universal sorting system that meets a wide variety of needs as well as highlyspecialized ones. The VIS sensor, for example, can be used to recognize print media by CMYK spectral analysis. TiTech AutoSort sorts a wide variety of materials, everything from paper and carton (printed, coated or untreated), to many types of plastic. You get reliable fractions at top purity grade. | | |
 |
TiTech ColourSort®
If you need to sort PET and PE by colour, you need to look no further than TiTech ColourSort® systems. TiTech VIS technique (visual spectrometry) enables you to precisely define the colour of the objects that you wish to sort. Being a flexible system, TiTech ColourSort® is able to define the boundaries between colours in line with your specific needs. TiTech ColourSort® detects all colours within the visible light spectrum, both of transparent and opaque objects. Moreover, TiTech ColourSort® provides simplified material detection.
| | |
 |
TiTech CombiSense®
TiTech CombiSense® is a sorting device designed to identify colours, shapes and metals from bulk solids. The metal sensor in TiTech Finder® is combined with a colour camera. The high spatial resolution in conjunction with precise colour measurement enables sorting complex material streams of used electrical devices and the recovery of nonferrous metals with a high purity. | | |
 |
TiTech Finder®
TiTech Finder® ensures the recovery of valuable metals in the recycling process and increases the added value of metal fractions. TiTech Finder® guarantees high accessibility and product quality as well as flexibility for every customer. It is tailor-made to the specific wishes of the recycling market and secures the highest degree of recovery. | | |
 |
TiTech PaperSort®
TiTech PaperSort® systems offer precision sorting of different types of paper. In addition to an NIR sensor, TiTech PaperSort® also uses a VIS sensor to detect colours printed with CMYK technology. This technique enables TiTech PaperSort® to sort printed paper from printed carton of similar colour. More over, the system can sort deinking-capable material with a high purity grade. | | |
 |
TiTech X-Tract®
Innovation and progress in one. Based on high-resolution x-ray transmission image processing, the sorting machine uses dry-mechanic techniques to separate materials and waste streams based on specific atomic density. This innovation opens new frontiers in efficient processing of recovered valuable materials | | |
 |
working pinciple Bild_Illu
working pinciple Bild_Illu | | |
|
|
|
|
TIRA GmbH
|
|
 |
TIRA Environmental Simulation
Environmental simulation is actually an integral part of future- and market-oriented businesses and manufacturer, a decisive argument and tool for persistent competitive leads and such image features as safety, quality, reliability, and comfort. | | |
 |
TIRA Material testing
Automotive industry | | |
|
|
|
|
Timesavers International B.V.
|
|
 |
eccentric-rotating-disc
eccentric-rotating-disc | | |
 |
Grinding masters
Grinding masters | | |
 |
Series 1100/1200
Get it right with The Series 1100/1200
1100 seriesWhether you're starting a business or need a small footprint machine for your existing business that's packed with mighty features, these wet and dry machines out perform others in their category.
We know you want the peace of mind that your shop will keep up and running. That's why we've always offered a line of smaller machines expressly for the plant that is looking to replace hand finishing -- or who just wants an efficient, high quality machine that produces the finest finishes.
Perfect for parts as short as 125 mm and as wide as 600 mm. These machines get it right from the start. If you're in the market for a workhorse family of worry-free products, plus a host of features that others call options, the Timesavers 1100 and 1200 Series is designed for you. | | |
 |
Series 1300
Get it right from the start with the Series-1300
Series 1300 Wide belt sander
Your bussiness may be in its beginning stage, but we know you still want the piece of mind that your shops will be up and running for years to come.
That's why we've always offered an integrated line of products designed for the finisher who is just starting out. If you're looking for a workhorse family of worry-free products, plus a host of features that others call options, The Timesavers Series 1300 is designed for you.
| | |
 |
Series 3100
Boost performance with the Series 3100
It's performance that counts, not the size of your shop. Wheter your a large or small shop the Series 3100 is ideal for high production deburring and finishing. That's because wheter you're deburring stamped parts or improving edges in punched areas, the Series 3100 makes the job a breeze.
With the Series 3100 you will increase process quality and never have to worry about down-time. In short, you can trust them with all your finishing project needs. Big on throughput, and scrupulous on details, the Series 3100 boosts performence no mather the size of your shop.
| | |
 |
Veneer sanding
Goal of the process is the FINISH of products after sanding. A veneer sanding process is a fine sanding process on a thin layer of solid wood, glued on a (chipboard) panel.
The product surface should be finished, with sanding through the veneer. Generally the grit size of the abrasive belt of the last sanding head defines the finish. | | |
|
|
|
|
Tim Environment Products A/S
|
|
 |
Closed Thermal Composting (TC)
The TC-6000 is a highly efficient closed system for thermal composting of household waste material.
It is specially designed for densely populated housing areas.
| | |
 |
Drum Screen TS-7020
Drum Screens (TS)
Our Drum Screens are flexible machines for the screening of soil, slags or organic material.
The sorting is carried out in two or three fractions as required, the size of the screened material depending on the chosen mesh size of the drum.
| | |
 |
drum screen.
drum screen. | | |
 |
shredders
shredders | | |
 |
Stationary Screening Systems
The stationary versions of our Drum Screens are very individually adapted to different purposes.
| | |
 |
windrow turners.
windrow turners. | | |
|
|
|
|
TIGRA GmbH
|
|
 |
HSS and HPS knives
In addition to the back corrugated HSS and HPS knives (TIGRA's new High Performance Steel) of excellent quality, TIGRA offers two carbide blank systems which incorporate the carbide blank and the backing plate with high precision positioning. With this, both the SuperPac (with a back corrugated carbide blank) and the EcoPac (with two precision bored holes) can be resharpened several times which gives you an excellent price-performance ratio. | | |
 |
Product range for the woodworking industry
TIGRA offers a wide varierty of thousands of standard and special reversible knives and edge rounding knives in different carbide grades. Due to our large stock and our efficient production methods on highly accurate special machines, we can help you to drastically reduce your delivery times.
We also specialize in producing special reversible knives according to your drawings. | | |
 |
profile blanks
In 1984, TIGRA started the world's first serial producion for profile blanks for woodworking tools. Ever since then, TIGRA has continuously improved production methods and developed special carbide grades for blanks. Together with our customers, TIGRA has also designed a wide variety of special blanks. Permanent quality control and efficient machines offer you the optimum blanks at competitive prices. | | |
 |
Woodworking - General
Since its founding in 1983, TIGRA has specialized in the production of tungsten carbide for woodworking tools. Our carbide research and development as well as our building of special production machines are the guarantee that the products and production processes are continuously developing.
Our extensive production range includes reversible knives, blanks for profiling, planer knives, rods, bars and preforms for brazed cutters and many other products. Additionally TIGRA is qualified to develop special carbide products together with our customers.
The most modern pressing, sintering, and working technologies with a high level of automation guarantee the optimum cutting inserts for all kinds of woodworking applications.
| | |
|
|
|
|
TIGERWERK Lack- u. Farbenfabrik GmbH & Co. KG.
|
|
 |
General Industry
The demand for an optimum surface coating are permanently on the increase. Product characteristics, such as high operating efficiency and environmental friendliness, appropriate chemical and physical properties, as well as a great number of color and surface effects, are the prerequisite to meet the growing demands for an ideal powder coating. Demands that TIGER perfectly fulfills with its product range. 1200 colors and effects available from stock are used daily in general industry, such as in the furniture industry, in shelf and storage technology, for fences and railings, and for electronics and computer housings.
Special products, such as TIGER Shield duplex coating for heavy duty corrosion protection, anti-graffiti, thin-film powder and flexible powder coatings, round off the multifaceted program to perfection. | | |
 |
power coatings
power coatings | | |
 |
TIGER Drylac® Wood
The transfer and adaptation of this modern coating technology for industrially produced engineered wood, expecially medium density fiberboard (MDF) is ready for commercialization and TIGER has been a major contributor.
The TIGER concept is based around the development of the new TIGER Drylac® Wood powder coating system. This new concept combined with the knowledge gained in the fields of powder application, curing techniques, oven design, MDF quality requirements, text equipment and quality assurance has provided a process environment essential to industrial production.
After considering all these parameters the technology of powder coating MDF has become a technically and economically attractive alternative to wet lacquering and PVC foil lamination. It shows enormous potential with regard to economic efficiency, surface toughness plus the availability of a wide spectrum of color designs and effects, while being environmentally friendly with zero emissions.
The high quality of powder coating using TIGER Drylac® Wood makes it suitable for use across a whole spectrum of applications in the furniture industry, ranging from kitchens, bathrooms, offices, children's rooms to ready-to-assemble furniture, along with shop fittings and the audio & video sector. | | |
|
|
|
|
TIEMANN Schutz-Systeme GmbH
|
|
 |
Accessories
Adequate accessories to our protective fence systems complete our product portfolio. | | |
 |
Protective fence systems
Four protective fence systems for individual requirements including gate and door solutions are available. | | |
 |
Specail Designs
We offer customised solutions for special use cases. | | |
|
|
|
|
TOYO ADVANCED TECHNOLOGIES CO.,LTD.
|
|
 |
Centerless grinding machine
Centerless grinding machine | | |
 |
Centerless grinding machine.
Centerless grinding machine. | | |
 |
Centerless internal grinding machine
Centerless internal grinding machine | | |
 |
Face grinding machine
Face grinding machine | | |
 |
Internal grinding machine
Internal grinding machine for large bore parts | | |
 |
Internal grinding machine
Internal grinding machine | | |
 |
Super-finishing machine
Super-finishing machine | | |
|
|
|
|
Toyota Industrial Products
|
|
 |
3-wheel electric forklift truck
1 000 - 1 500 kg
The FBESF range is our smallest, most compact electric forklift - This 3 wheel design forklift is designed for light to medium product weights and product movements.
Its compact dimensions ensure it can navigate in tight production areas and rack and stack products in storage systems where operating aisles are at their minimum.
It is flexible enough to be used both inside and outside.
| | |
 |
Diesel engine forklift truck
1 500 - 5 000 kg Tonero
The 7FGD series is a multipurpose truck, designed for light, medium and heavy weights and movement, single and multiple loads and inside and outside use.
It offers the perfect blend of productivity, safety and comfort making it one of the soundest investments one can make. The choice of a dedicated LPG engine allows productivity whilst reducing exhaust emissions.
| | |
 |
Electric pallet truck
Toyota's powerful pedestrian models can operate at speeds of up to 6 km/h, regardless of load. Their extremely robust design is based on a narrow chassis and fully-rotating internal castor wheels - for easy, safe and durable operation.
Models
The 7PM18 (1800 kg)
The 7PM20 (2000 kg) | | |
 |
Hand pallet truck
Toyota hand pallet trucks are a common sight in factories, warehouses and retail environments everywhere. Because they’re ideal for transporting lighter loads over shorter distances, they’ll get goods off a production line and onto the truck as quickly, safely and comfortably as possible. | | |
 |
Reach truck
1 400 - 2 500 kg
Thanks to their advanced, modular construction, Toyota Reach Trucks can be precisely customised to suit your specific task. A wide range of chassis, mast and battery combination means they provide even more effective, reliable operation in almost any working environment.
| | |
|
|
|
|
TVM termoventilmec s.p.a.
|
|
 |
DUST EXTRACTION SYSTEMS
DESCRIPTION: Complete systems used in filtering air containing dust and shavings coming from the materials processing, they are designed according to the endusers requirements.
APPLICATIONS: Woodworking industry, metal industry, rubber-plastic, glass and textile industry, foundries, steelworks, paper industry, shoe factories, pottery industry and others.
| | |
 |
RECYCLING OF WOOD
Recycling has become an increasingly important factor in industrial processes.
TVM is present with projects of systems and supplies of machines to industrial recycling companies.
We are talking about milling machines, about flat, rotary and roller type screens, about inductive, magnetic, wind and mechanical separators and about pneumatic and mechanical conveyors.
| | |
 |
SCRUBBER
DESCRIPTION: Wet scrubber with possibility of sludge-removal system.
APPLICATIONS: Hygroscopic dust, they can be used in the mining industry, mainly in scrubbing the inert materials.
DATA:
- capacity: up to 120.000 cum/h - Dust emissions guarantee: up to 150 mg/Ncum
| | |
|
|
|
|
TURBOTECNICA S.r.l.
|
|
 |
rotating shot blasting unit alfa
rotating shot blasting unit alfa | | |
 |
Dust Collectors
The self-cleaning dry cartridges dust collectors type “FCA” are employed to remove the dust generated during the shot-blasting and sand-blasting operation.
The number and type of cartridges ensure a dust concentration in the discharged air far below the limit requested by the law in force.
The cartridges are cleaned by periodic impulses of compressed air. The dust is collected by a wheeled box placed underneath the filtering cabin.
The blowing impulses are controlled by an electronic panel.
TURBOTECNICA design and manufacture dust collection systems also for grinding and polishing lines, and special units for metallization plants.
| | |
 |
Hook type shot-blasting machine - DELTA
The shot-blasting machines type “DELTA” are the most versatile in terms of typical employment and size of the materials to be treated.
In fact the customer can choose the size and loading capacity of the machine according to the parts to be shot-blasted.
The materials are hanged on the hook, and this is manually or automatically transferred into the blasting room. Once in position, the hook starts to rotate on its axis and move back and forward in front of the turbines (mounted on one side of the machine). These combined movements ensure the complete shot-blasting of the parts external surface. | | |
 |
Shot blasting machine with conveyor - NTOR
The tunnel type machine “NTOR” is a continuous shot-blasting unit with a special wear-proof steel wire conveyor.
The layout of the machine consists of a tunnel having the blasting room in the middle section. The 4 or 8 turbines are mounted above and below the belt conveyor, and are orientated in a way to ensure the perfect surface covering even for the most complex parts.
The final section of the tunnel is provided with a blowing system to remove the shots possibly remaining on the parts.
The machine does not require a pit, and is supplied complete with a self-cleaning dry cartridges dust collector. | | |
 |
Shot-blasting machine with rolls conveyor - GAMMA
The tunnel type machine “GAMMA” is a continuous shot-blasting unit with a motorised rolls conveyor, employed for surface treatment of plates, profiles, pipes and steel structures.
The number and location of the turbines are optimised to ensure the full coverage of the materials transported by the conveyor.
By the frequency inverter for the rolls conveyor driving unit, the operator can choose the best compromise between the production speed and the final result, depending on materials condition before shot-blasting.
A blowing and brushing device ensure the shots removal from the surface of the blasted parts.
The machine type “GAMMA” can be installed “in-line” with a painting facility. For plates only it is also available the model with the conveyor in vertical position (type “VERT”).
The shot-blasting unit is supplied complete with a self-cleaning dry cartridges dust collector.
| | |
 |
tumble blast machines
tumble blast machines | | |
|
|
|
|
Turbine Technology Services
|
|
 |
Control System Solutions
The TMS-1000 Series of turbine controllers are built on the most advanced PLC platforms available today; these systems are designed using the latest in Distributed Control System philosophy. With our hardware independent approach, one can use technology and parts already common to their plant. The following benefits result from the implementation of a fully integrated TMS® system:
Improving existing control system performance and reliability
Optimizing unit output and efficiency
Eliminating dependence on the OEM for spare parts and/or repair
Reducing the cost of spare parts and/or repair
Improving the amount and quality of information the system provides to operators and engineers
Providing additional features to enhance unit operation and maintenance
We supply a complete package of engineering, hardware and technical support to complete the control system upgrade, which includes overall system design; all controller and operator interface hardware, software, and installation drawings; instruction manuals; and technical direction for startup and load tests.
From our corporate headquarters in Florida, lead engineers have the capability of monitoring, troubleshooting and solving any situation at your plant, day or night. Our facilities are equipped with the latest technology to provide you with all of our services online. From this, you can receive informed solutions in a timely and cost-effective manner.
| | |
 |
ElectroFlo® Electronic Fuel Control Valve
Fast and accurate flow control for combustion turbine applications is more accessible with the ElectroFlo® Electronic Control Valve. Developed by TTS, the ElectroFlo® Valve surpasses the response and accuracy of most pneumatic and high pressure hydraulic systems, while eliminating many of the complications associated with each. With the ElectroFlo® Valve and other suggested modifications, TTS can completely eliminate all hydraulic and pneumatic accessories found on typical gas turbines.
The ElectroFlo® value has over 10 million installed hours in applications controlling fluids from natural gas and diesel fuel to steam and water for NOx abatement.
| | |
 |
Mastermind™ Operation and Maintenance Software Package
Mastermind™ is a universal operation and maintenance softwarepackage developed to provide the user with prompt, relevant information necessary to keep a gas turbine in operation. Mastermind™ serves as an extensive reference library that draws from a variety of related documents including connection diagrams and real time I/O to inventory documents and procurement information. Mastermind™ can be launced by clicking on a device shown on the Operator Interface System or automatically from an alarm.
Mastermind™ supplies critical information by highlighting important data, then pointing the right way to a solid solution. Thus, the consolidation of multiple forms of infomation permits a greater volume of date to be maintained, updated and analyzed. A variety of protocols are available, including Ethernet (TCP/IP), DH+ and MODbus, which allows communication with
| | |
 |
Operator Interface System
TTS's Operator Interface System (OIS) is an interactive program, offering you exceptional flexibility. The MS Windows based OIS utlilizes many advanced features like networking, sharing data with other programs, and multitasing through its windows-based program. Displays are available in multiple formats, each designed to put essential information at the operator's fingertips. With these troubleshooting and diagnostic capabilities, gas turbine operators duties are simplified.
| | |
 |
Turbinator®
This wireless human/machine interface communicates with the turbine via radio frequencies and transmits I/O in real-time. Three methods of command are possible including voice activation, point and click, and a handheld touchscreen display unit.
Roaming freely around the site, operators can monitor signals previously seen only in the control room. With this freedom, operators have the ability to perform all control room functions, including:
Inspect equipment
Troubleshoot problems
Acknowledge alarms
Calibrate equipment on the turbine base
Turbine control | | |
|
|
|
|
Tungaloy Corporation
|
|
 |
Cutting Tools
Application of cutting tools is varies and generally categorized into turning, milling to drilling. Tungaloy has extensive lineup of TAC inserts with combination of various grades, dimensions and chipbreakers. These inserts respond to “high-speed and precision cutting” needed with time. | | |
 |
Indexable insert
Lathe mounted TAC holders can be used for many applications including turning and boring, threading, grooving, and parting. We also produce modular tools for such turning applications. | | |
 |
Milling Tools
These tools, mounted on milling machines, are employed for tasks that include face milling, shaping, excavation, and profiling. Face-milling cutters and end mills that utilize TAC indexable inserts are main products. | | |
 |
PCB Drills
「Micron-Drills」, designed for drilling printed circuit boards, play significant roles for developing electronics-related industry. They promise high-precision and high-efficiency drilling of various circuit boards with long tool life, including multilayer boards. Tungaloy’s advanced technology, with development and manufacturing of carbide materials for drills, does not allow competitors to imitate.
| | |
 |
PCBN and PCD tools
cBN is an ultra-hard cutting tool material consisting of polycrystalline cubic boron nitride with a metallic or ceramic binder. cBN is applied to TAC inserts (indexable inserts), drills, endmills, etc. cBN tools permit metal cutting at feeds and speeds much higher than conventional cutting tools materials. | | |
 |
Toolholders
Lathe mounted TAC holders can be used for many applications including turning and boring, threading, grooving, and parting. We also produce modular tools for such turning applications. | | |
|
|
|
|
TSE Troller Schweizer Engineering AG
|
|
 |
curtain coating.
curtain coating. | | |
|
|
|
|
TS Plastics Sdn Bhd
|
|
 |
4-gusset-bag
4-gusset-bag | | |
 |
4sealing-bag
4sealing-bag | | |
 |
bag-form
bag-form | | |
 |
rice bag
rice bag | | |
 |
roll-form
roll-form | | |
 |
stand-up-pouch-bag
stand-up-pouch-bag | | |
 |
thermoforming
thermoforming | | |
|
|
|
|
TRUMPF GmbH + Co. KG
|
|
 |
Bending Tools from TRUMPF Maschinen Austria
The performance of a press brake or bending machine does not solely depend on the quality and performance of the machine itself, but also on the quality of the tools used!
That is why TRUMPF pays the ultimate of attention to first class, practical and well-thought out top and bottom tools, capable of correspondingly solving the most extremely wide-ranging and complex cases in practical use. The basis behind this are the decades of experience boasted by a trained team of experts.
Quality is Standard:
Tool elements are self-centering, inter-exchangeable and for turn-around use
Securing to ensure the die does not fall out
Laser-hardened working zone (58-60 HRC)
Durable laser-labelling with a high degree of information
Quality-safety packaging | | |
 |
Guillotine Shears from TRUMPF
High productivity and cut quality – The TruShear system of shears | | |
 |
Punching machines
Punching machines | | |
 |
punching tool
punching tool | | |
 |
TruBend 7018 / 7036
TruBend Series 7000 - an perfect interplay between human and machine: high speed and acceleration values for preasure bars and the backstop make the machines to the fastest bending machines in the world. | | |
 |
TRUMPF machines for laser processing – laser cutting and laser welding
The laser beam is a multi-functional tool. The workpiece geometry can be simple or intricate – the laser beam can handle it all.
Sheetmetal working without laser machines is no longer conceivable today. The strength of the laser for cutting lies in its ability to process a vast range of materials, whether thick or thin. The lasered workpiece have cut edges of highest quality and do not need to be refinished. They are ready for assembly – a huge advantage.
In laser welding, the great benefits are the top welding speed and excellent seam is narrow and deep, with little distortion of the joined parts.
| | |
 |
TruPunch punching machines and technology
TruPunch punching machines and technology | | |
|
|
|
|
Trojan Technologies Europe B.V
|
|
 |
About Ultraviolet (UV) Light and Water Quality
Confidence in our water -- clean, safe water -- has been increasingly challenged over the past decade.
Ten years ago, how many of us had heard of E. coli, Cryptosporidium or Giardia? Today, these waterborne bacteria and parasites are almost as well known as polio, typhoid, and cholera were to a past generation. High-profile, waterborne disease outbreaks in Canada and the United States have made us all aware that water contaminated with microorganisms can cause serious illness and death. | | |
 |
The Challenges
While contaminated water is generally seen as a Third World problem, there is mounting evidence that most industrialized countries have not properly managed their water resources and, as a result, are now facing serious challenges as well.
Important aquifers in many parts of the world are at critically low levels because of overuse. Farming and industrial activities are contaminating water resources throughout North America and Europe. Harmful chemicals such as pesticides, NMDA and 2-4 dioxane have entered our water supplies.
The European Environmental Agency (EEA) estimates that some 200,000 square kilometres of European territory may be seriously polluted in 50 years if no remedial action is taken. This is a staggering problem since 65 per cent of public drinking water in Europe is drawn from groundwater.
Confidence in our ability to protect our water has been further eroded by questions about the effectiveness and safety of traditional chlorine water treatment. Evidence of chlorine-resistant pathogens, and concerns about cancer-causing disinfection by-products resulting from chlorine treatment, have led to new EPA guidelines requiring municipalities in the U.S. to reduce or eliminate their use of chlorine.
The UV Solution
As governments and regulators around the world move to protect their water, those responsible for its treatment and delivery are looking for solutions.
The answer lies in ultraviolet light. UV technology is a proven, cost-efficient, and highly effective way to destroy microorganisms and micropollutants. Increasingly, municipalities and plant operators are turning to UV to ensure the safety and quality of their water - to regain confidence in these supplies.
The case for UV
A tested and established technology, UV water disinfection has earned the confidence of thousands of municipalities in North America and Europe as a highly effective way to disinfect drinking water, wastewater, and water for industrial processes. Over 2,000 municipal groundwater and surface drinking water installations in Europe, and 1,000 groundwater installations in the United States, rely on UV disinfection.
Backed by 60 years of operating experience and sound research, UV is rapidly becoming the technology of choice for wastewater treatment and a critical component of multi-barrier drinking water treatment systems. So what is UV? And why is it a superior solution?
Each time we go outside, we are exposed to ultraviolet (UV) light. Invisible to the eye, you can't see it, but you certainly can feel its burning effects on your skin if you stay out in the sun too long without proper protection. In water treatment applications, specialized lamps are used to produce UV light. As water rushes by these lamps, microorganisms in the water are exposed to a lethal dose of UV energy which destroys their ability to function and reproduce. The process is simple and 99.99 percent effective.
The advantages and benefits of UV are numerous. For example, UV technology:
· is EPA-endorsed
· destroys bacteria (E. coli), viruses (hepatitis and polio), and virtually all other water-borne pathogens
· destroys Giardia and Cryptosporidium which are resistant to chlorine
· eliminates harmful micropollutants (such as herbicides and pesticides)
· is safe to handle
· works at least 20 times faster than chlorine
· is environmentally friendly -- no toxic chemicals, no chlorine leaks
· produces no known disinfection by-products, unlike chlorine
· is more cost-effective than chlorine systems
UV. It all adds up to water confidence. | | |
 |
TrojanUV3000™B
An upgrade of the original TrojanUV3000™, the TrojanUV3000™B is the most installed UV wastewater system in the world. The UV3000B offers an effective UV disinfection solution for larger-sized treatment plants with limited resources. The system uses low-pressure, low-output lamps.
Customers
Municipal Wastewater plants
Water Reuse applications
Industrial Wastewater applications
Bathing Area Recirculation
Fish Hatcheries
Characteristics
Automatic level control
Electronic ballasts and enclosures
Optional cleaning tank
Peak flows of 1 to 5 MGD (160 to 800 m³/hr)
Low-pressure, low-output lamps
Manual cleaning
| | |
 |
TrojanUV3000Plus™
TrojanUV3000Plus™
Designed as one of the most intelligent disinfection solutions on the market, the TrojanUV3000Plus™ features fully Automatic Chemical/Mechanical cleaning (ActiClean™) to ensure the lamp sleeves are continuously kept clean. Incorporating high-output, low-pressure lamps, the system automatically dims the lamps to match any drop in flow demand or increases in water clarity.
Customers
Municipalities with populations between 25,000 and 300,000 people.
Characteristics
Peak flows of 5 to 20 MGD (800 to 3200 m³/hr)
High-output, low-pressure cost-saving amalgam lamps
Hydraulic System Center
ActiClean™ - Automatic Chemical/Mechanical cleaning system
Flow and dose pacing | | |
 |
TrojanUVSwift™
The TrojanUVSwift™ Municipal Drinking Water system offers proven performance against waterborne pathogens including viruses, bacteria and protozoa. Our advanced systems meet disinfection targets with unsurpassed reliability. The TrojanUVSwift™ offers disinfection with no known disinfection by-products. The UVSwift provides a flexible platform that allows for upgrades to meet new or more stringent requirements, such as changes in flow rate, regulatory requirements, disinfection redundancy demands, or changes in intake water quality. With the smallest reactor dimensions in the industry, the UVSwift is ideally suited for post filtration applications.
The UVSwift's flexibility, cost-effectiveness, small footprint, and optional advanced chemical/mechanical cleaning system made it the UV technology of choice for the City of Seattle, Washington, which is implementing the world’s largest UV drinking water project (180 MGD).
Advanced Sensor Technology
Featuring smarter sensors for more reliable UV measurement, the new TrojanUVSwift™ sensor technology offers advanced components that maintain system integrity and accurately reflect UV measurement. The UVSwift also provides advanced self-cleaning sensor technology via the TrojanAccUVSensor™ which reduces fouling and improves reliability
ADVANCED CONTROLS - TROJAN UVDOSIMETER
The TrojanUVDosimeter™ predicts dose online, based on reactor hydraulics and certain operating parameters of the system. From this information, the UVDosimeter calculates the bioassay-equivalent UV dose, and then, constantly adjusts the lamp operating power levels to meet the design or target dose. As a result, the UVDosimeter can provide instant, status-of-dose delivery and effectively respond to events, such as changes to flow rate and source water quality
High-intensity lamps
Variable output optimizes energy use. The TrojanUVSwift™ system requires fewer lamps to achieve disinfection targets, lessening space requirements and decreasing installation and maintenance costs. The output of the system's high-intensity lamps can be varied as water quality or flow rates change. This variation optimizes energy use and lowers annual operating costs.
Flexible lamp cleaning options
The UVSwift system offers a range-of-cleaning technologies, allowing you to match your system to site-specific water quality. As well, a flexible design enables you to easily upgrade your UVSwift system if water conditions change.
| | |
 |
TrojanUVSwift™ECT
The TrojanUVSwift™ECT utilizes Trojan's high-intensity medium pressure lamps and employs sophisticated controls to optimize the treatment of environmental contaminants. The broad spectrum of light emitted in the TrojanUVSwift ECT makes it extremely well-suited for the treatment of many contaminants, particularly certain pesticides and taste and odor-causing compounds found in surface waters. Its ultra-compact footprint and large flow capacity make it an excellent reactor for use as part of a multi-barrier system in large municipal applications. In such applications, the TrojanUVSwift ECT destroys contaminants such as pharmaceuticals and taste and odor-causing compounds while providing disinfection of microorganisms such as Cryptosporidium and Giardia.
Characteristics
The most compact UV reactor available
Validated disinfection
Applicable for ECT in drinking water, groundwater remediation, and industrial applications
Capable of treating hundreds of millions of gallons per day
Available in a variety of power configurations
Designed for hydraulic efficiency using computational fluid dynamics
All wetted surfaces constructed of NSF-listed materials
Integrated (via control algorithms) with the hydrogen peroxide delivery system to provide UV-oxidation
Available with Trojan Acticlean™, a chemical/mechanical wiper mechanism for maximization of quartz sleeve transmittance
| | |
|
|
|
|
TRIBO HARTSTOFF GmbH
|
|
 |
Hobs
Blanks for hobs and broaches | | |
 |
Metal forming
Blanks and semi-finished products for forming tools for squeezers, pulling and rolling | | |
|
|
|
|
TRENNJAEGER
|
|
 |
LKM 300 x 3.300
Trennjaeger LKM 300 x 3.300 mm
| | |
 |
TES 350
Wellknown spurwheel gearbox for cutting profiles, angles, tubes and regular steel.
Cutting range
90° 120 mm round 170x100 mm rectangular - TES 350 L 130 mm round 180x100 mm rectangular
45° 100 mm round 120x100 mm rectangular
30° 80 mm round 80x 80 mm rectangular | | |
|
|
|
|
TREMA Verfahrenstechnik GmbH
|
|
 |
Custom-designed air pollution control solutions
TREMA Verfahrenstechnik GmbH specializes in the engineering, supply and construction of custom-designed air pollution control systems featuring wet and dry technologies. Drawing on a long and successful track record in waste gas and exhaust air cleanup, TREMA commands the knowhow and expertise to provide you with cost-effective high-efficiency air pollution control solutions.
We are your competent partner for:
Stand-alone units
Integrated air pollution control solutions
Turnkey air pollution control packages | | |
 |
Cyclone separators
Cyclone separators | | |
 |
Flue gas purification systems
Flue gas purification systems | | |
 |
Rotation scrubbers
Rotation scrubbers | | |
|
|
|
|
TRAVAGLINI SpA
|
|
 |
Maturing Technology
Our company has been equipping sausage-manufacturing plants for over 50 years and is today the leader with its technology resulting from a long research study. The "Travaglini System" is able to solve, in all its different applications, all problems related to the maturing of sausages and raw hams. | | |
 |
Ovens for Cooking processes
Ovens for Cooking processes | | |
|
|
|
|
TRAUB DREHMASCHINEN GmbH
|
|
 |
Automatic lathes
Quick and precise: INDEX automatic lathes are especially designed for fast, cost-optimized production of typical automatic turned parts and complex NC turned parts.
The flexibility of CNC technology, combined with the high speed of classic automatics, allows the production of small to medium lot sizes at competitive prices. Our extensive range of attachments, including, for example, a polygonal turning attachment, allows a high degree of complete machining.
Automatics of the INDEX SpeedLine offer high performance with smallest floor space requirements.
| | |
 |
Automation
There are various possibilties available to load and unload your turning machine. They vary from integrated systems to portal solutions to robot handling.
Further functions such as measuring, assemling and cleaning can be integrated into the automation as well. | | |
 |
Sliding headstock automatic
CNC long turning machine with a maximum spindle opening of 32 mm. The machine has a modular design and up to four tools can be used simultaneously depending on the configuration level. | | |
 |
Technology integration
Complete maching with turning machines provides short processing times and hence high profitability. For this reason many different technologies can be integrated into our turning machines. Grinding, broaching, welding or hardening are just a few technologies which have been already successfully integrated into the machines of INDEX and TRAUB. | | |
 |
TNX65/42
Manufacturing cost-effectively at all times - the modular concept of the TNX65/42 makes it possible. Whether with two, three or even four tool carriers that can all be optionally equipped with a Y-axis, the TNX65/42 adapts to your requirements and manufacturing needs. | | |
 |
Vertical turning machine
Simple, fast and cost effective tool changing due to 3-dimensionsional movement of the headstock
- Easy integration of all technologies: Turning, milling, laser hardening, laser welding, grinding, assembling.
- 8 to 12 tool stations on mounting plates, fixed or driven
- Extremely short idle times due to new tripod concept:: 1 g acceleration and rapid movement up to 60 m/min
| | |
|
|
|
|
Tranter International
|
|
 |
Introducing The MAXCHANGER® Welded Shell & Plate Heat Exchanger
A quick look at the MAXCHANGER® may lead you to dismiss it as a CBE heat exchanger. Yet there is nothing brazed in this unit—it is truly 100% same-same material. Consider MAXCHANGER® ratings: to 70 barg (1,015 psig) and 538°C (1,000°F). No CBE can survive under those conditions.
MAXCHANGER® single- and multiple-pass designs provide durable performance in tight spaces. The unique geometry of the patented MAXCHANGER®’s variable interspaces produce extremely high "U" values. Channels formed between the specially dimpled, welded plates direct the two heat transfer media counter currently through alternate paths for maximum efficiency, immediate thermal response and a close temperature approach capability of less than 1°C (2°F).
| | |
 |
Introducing The SUPERCHANGER® Plate & Frame Heat Exchanger
The SUPERCHANGER® heat exchanger is designed to provide maximum efficiency in transferring heat from one liquid to another, or from steam to liquid. The SUPERCHANGER® consists of a series of gasketed, embossed metal plates arranged alternately and bolted together between end frames to form channels through which hot and cold media flow. The hot fluid flows on one side of the plate while the cold fluid flows on the other, with the plate itself providing the most effective means to transfer heat from one fluid to the other. Gaskets mounted on the plates seal the channels and provide flow direction. As liquids flow counter-currently through the channels between the plates, the cold liquid becomes warmer and the hot liquid cooler.
Most units are designed for a one pass/one pass flow arrangement resulting in all nozzles being installed on the stationary end frame, which facilitates simpler piping arrangements and easier disassembly.
| | |
 |
Introducing The SUPERMAX® Welded Shell & Plate Heat Exchanger
Introducing The SUPERMAX® Welded Shell & Plate Heat Exchanger | | |
 |
Introducing The ULTRAMAX® Welded Plate Heat Exchanger
The ULTRAMAX® heat exchanger is designed for use with liquids, gases or two-phase mixtures at extreme temperatures to 343°C (650°F) and pressures up to 45 barg (650 psig) for standard range units. Extended range units are available for higher temperature and pressure applications.
ULTRAMAX® significantly high “U” values result from the unique turbulence created by the unit’s corrugated plates. The resulting velocity profile eliminates stagnant areas and promotes maximum heat transfer. ULTRAMAX® welded plate heat exchangers provide true countercurrent flow, unlike some competition cross flow units. Countercurrent flow offers full LMTD and allows for 1°C (2°F) temperature approaches. Induced turbulence scours the heat transfer surface during operation, thereby reducing fouling. This turbulence also aids the effectiveness of CIP procedures.
| | |
 |
Moving Heat More Efficiently—Through Plates
Across the Tranter product line, there's one thing all have in common—plates instead of tubes. Plates simply do the job more efficiently and with less maintenance. They consume less of expensive and precious resources, both in materials such as steel and in fuel, than do conventional shell & tube exchangers. So, they consume less of your most precious resource—money.
Plate heat exchangers are also more controllable and responsive, thanks to their higher heat transfer coefficients and lower hold-up volume. Your process stabilizes more rapidly for tighter process control and steady comfort in all applications throughout load swings. You'll also consume less cooling media, which can mean significant savings with expensive lube oils, for example.
From plate & frame to welded to prime surface designs, plate heat exchangers are the 21st Century technology for 21st Century heat exchange challenges.
| | |
|
|
|
|
TPS-Technitube Röhrenwerke GmbH
|
|
 |
OCTG mill
The OCTG mill is producing tubes for oil and gas fields in the so-called standard N.U.E. and E.U.E. class as well as premium and non-standard threads.
Tubing, casing, line pipe and drill pipe according to API belong to the product program. Furthermore, finished tubes and connections are produced until 8.5/8" outside diameter. | | |
 |
TPS-INOS
TPS-INOS produces seamless, cold-finished tubes in stainless stells and nickel alloys in the size range from OD 6.0 up to 38.0 mm.
The production process is a cold working, respectively cold pilger rolling and cold drawing process of the tubes to the required dimension.
TPS-INOS customers are mainly companies within the area of the chemical and petrochemical industry as well as oil and gas industry. | | |
 |
Welded Tubes & Pipes
A wide range of production and stock capabilities allows us to offer first class quality products in combination with reasonable prices and flexible delivery times according to your need. | | |
|
|
|
|
Thyssen Duro Metall GmbH
|
|
 |
Elmedur® for Die Casting
Due to their low weight, aluminium and magnesium alloys have found uses in many fields of industry. Apart from sheet and extrusion moulded products, they are also used chiefly for die cast products. These products are manufactured in horizontal cold chamber die casting machines in which liquid aluminium is poured into a horizontal arranged filling chamber and pressed into the mould under high pressure by a piston rod and plunger.
Plunger materials made of Thyssen Duro Metall copper alloys offer the advantage of high shot rates, good emergency running properties and preservation of the expensive filling chambers.
| | |
 |
Elmedur® for the Electro-Technics
Contact tulips
Vacuum switches
Shafts for rotary anodes
Spring contact rods for rotary and single-post isolating switches
| | |
 |
Elmedur® Hard Copper Alloys for Tool- and Mould-Making
Copper materials are typified by their high thermal conductivity. They offer advantages over steel plastic moulds have to be cooled strongly or heat has to be dissipated over long distances.
The good thermal fatigue resistance of Thyssen Duro Metall copper alloy is exploited in ingot mould making for non-ferrous metal casting.
When our materials are used as FE electrodes, the high modulus of elasticity reduces the oscillation of the electrodes in the erosion gap, thereby enabling tighter die sinking tolerances. Thin root faces are less sensitive to handling errors and mechanical damage.
| | |
 |
Flash Butt Welding
current and pressure transmitting welding jaws for all steel and stainless steel profiles
current transmitting welding jaws for steel profiles
| | |
|
|
|
|
THOME PRÄZISION GmbH
|
|
 |
3D-Measuring machine SMART manual
3D-Measuring machine SMART manual | | |
 |
CNC and manual Column-Type CMMs
CNC and manual Column-Type CMMs | | |
 |
CNC CMM RAPID and RAPID-Plus
CNC CMM RAPID and RAPID-Plus | | |
 |
CNC Measuring Machine SIGMA -TETA
CNC Measuring Machine SIGMA -TETA | | |
|
|
|
|
Tecfast Verbindungssysteme GmbH
|
|
 |
riveting tools.
riveting tools. | | |
 |
blind rivet nuts and screws
blind rivet nuts and screws | | |
 |
blind rivets
blind rivets | | |
 |
Pneumatic tools
Pneumatic tools | | |
|
|
|
|
Teamdress Stein GmbH
|
|
 |
eco-line
eco-line | | |
 |
RANGER
RANGER | | |
 |
workwear
workwear | | |
 |
workwear
workwear | | |
|
|
|
|
TDM Systems GmbH
|
|
 |
tool crib
tool crib | | |
|
|
|
|
TCS SÜSSEN GmbH
|
|
 |
3rd Generation System for High-End Engineering
CAE-System for electrical engineering (ET) and process control engineering (MSR) of machines and facilities. It offers also multi-user access and concurrent engineering. Additionally, this system has an integrated documentation and revision management. | | |
 |
The first 3rd Generation IT-CAE/DMS System
Our IT-CAE/DMS System is an object oriented CAE Framework with a modern system-architecture and engineering-database.
With this CAE Framework it is possible to project and document consistently and conform to engineering-phases for the first time. All modules are based on object oriented software technology.
| | |
|
|
|
|
TBT Tiefbohrtechnik GmbH + Co
|
|
 |
grinding machines
grinding machines | | |
 |
Tools Accessories
Please ask for more detailed informations about our deep hole drilling machines accessories | | |
 |
Tools: Deep hole drilling tools
TBT single-lip drills are manufactured for any drilling diameter (1/1000 mm steps) from 0.9 mm to well over 50 mm and in overall lengths which can even exceed 2500.
Depending on the material to be drilled, the machine utilised by the customer and the particular drilling situation, we manufacture the optimum tool for your applications.
Whether in standard version or for widening already existing bores, as step tool for making precision stepped bores with minimised centre offset or as special tool for special boring, whether without coating or in a version with coating, and for the most exacting requirements, also with diamond-tipped tool cutting edge.
TBT advises you and implements your head and shaft requirements for the tools efficiently and quickly with the latest design and production methods.
The tool head and shaft are brazed with the clamping sleeve to fit your machine.
TBT always keeps several hundred different clamping sleeves in stock.
Just ask for our complete offer of accessories for deep hole drilling | | |
|
|
|
|
TBi Industries GmbH
|
|
 |
Accessories
Water cooling units | | |
 |
Consumables
MIG/MAG Spare Parts
TIG Spare Parts
Plasma parts (Cutting torches)
| | |
 |
MIG/MAG Push-Pull Systems
Standard Push-Pull Torches
PowerPull Welding Torches
SpoolGun
| | |
 |
MIG/MAG Welding torches
TBi Top 2000 series (air cooled)
TBi Top 2000 Series (water cooled)
TBi Classic (air cooled)
TBi Classic (water cooled)
Remote Control Modules
Fume Extraction Torches (air cooled)
Fume Extraction Torches (water cooled)
Machine Torches (air cooled)
Machine Torches (water cooled)
| | |
 |
Plasma Cutting torches
Handheld Cutting Torches (air cooled)
Machine torches (air cooled)
| | |
 |
Plasma Welding torches
Manual plasma welding torch
Welding torches for automation
| | |
 |
Robot Torch Systems
MIG/MAG Robot Torch System TBi RoboMIG
TIG Robot Torches
Plasma Robot welding torches
Wire Feeding Systems for automation
Torch Cleaning Stations
| | |
 |
Special Use Welding Torches
Carbon Welding Torches
MIG/MAG Tandem (Twin-Wire) Welding Torches
Powder-MSG Welding Torch
Custom-designed Welding Torches
| | |
 |
TIG Welding torches
Handheld Welding Torches (air cooled)
Handheld Welding Torches (water cooled)
Machine Torches (air cooled)
Machine Torches (water cooled)
TIG Cold Wire Feeders
| | |
|
|
|
|
TAT−Technom Antriebstechnik GmbH
|
|
 |
drive elements
drive elements. | | |
 |
Spindeln und -muttern in Sonderausführung
nach Kundenzeichnung, qualitativ hochwertig
zu wirtschaftlichen Preisen und akzeptablen Lieferzeiten
| | |
|
|
|
|
Tantec GmbH
|
|
 |
Leak detection
Leak detection is a powerful electronic tool for improving quality control on processing lines for 3-dimensional plastic parts or flexible films.
| | |
 |
Measuring equipment
Changes in surface energy can be measured in a number of ways. The most common forms of surface-energy measurement involve applying test inks or by contact-angle measurement. Tantec manufactures and supplies contact-angle meters, as well as a range of test inks for accurate measurement of surface energy.
| | |
 |
Plasma treatment
Plasma surface treatment technology offers innovative solutions to adhesion and wetting problems in many industries. Component preparation is an important step prior to bonding, painting, varnishing and coating processes. Plasma treatment provides an economical solution for the cleaning and activation of component surfaces before further processing.
Plasma surface treatment provides an economical solution for the cleaning and activation of complex surfaces before further processing. This is especially true for profiles with complex surfaces that cannot be treated using regular corona treatment mechanisms.
| | |
 |
QA System
When performing corona surface treatment of polymer based products it is often neccessary to have a full control over the treatment process. Especially in the medical device industy is it a neccessety to acquire 100% quality control of the corona surface treatment of all parts at all times. A monitoring system can reduce scrap material by instant alert or reject signals. It also aids the operators to maintain an optimum Corona process at all times. | | |
|
|
|
|
Tanis Food Tec
|
|
 |
Cakes: Swiss roll & layer cake
Sheet cakes processed in a continuous oven can be further processed (after cooling) into slab cakes, layer cakes, Swiss rolls or cake bars.
Products are slit into strips and decorated with cream, jam, caramel, marshmallow, chocolate, mousse, etc. via manifold depositors.
Then, they can be rolled to Swiss roll, stacked to layer cakes, or continue as a cake bar. After cutting the product to the final length it will be enrobed or wrapped.
| | |
 |
Cakes: their batters
Dry matters like sugar and flour are pre-weighed in buffers, and glucose, eggs, water and oils are measured by flow meters into our batter premixer.
All ingredients are mixed to a slurry in this premixer.
After a pre-set time the ready mix is transferred via a pump to a buffer tank. From there the aerator will continuously draw this unaerated batter.
In the aerator the correct amount of air is dosed for a fully controlled final density.
This sponge cake like product can now be sheeted, for a layer cake or swiss rolls, on a continuous oven, or deposited into pans for pound cake type products.
For Jaffa cakes the product will be deposited with a manifold straight onto the oven belt.
Special products like chiffon and cuillere biscuits: the albumen and sugar are separated from the batter mix and separately aerated to a very light density.
The highly aerated egg white and the normally aerated remaining slurry are then mixed together in the TFT continuous dry ingredients mixer.
There other ingredients, like carrots, raisins, almond powder and sometimes flour, can be gently folded in the base batter.
| | |
 |
Candy Bar
Tanis Food Tec is a global leader in designing, engineering and producing Aeration Equipment for the Food Industry and serves three segments of this industry:
Confectionery
Bakery
Dairy industry
Examples for the application of our Rotoplus Aerators are:
Sponge cakes, tarts and aerated fillings/creams for these tarts and cakes
| | |
 |
Chocolate
Added value for all your chocolate products with TFT Tempering & Aeration lines:
The injection of gas in a cooled mixing head causes a reorganisation of chocolate crystals. The result is a better temper and heat resistance of the chocolate. TFT has been able to increase Beta-6 crystals in the chocolate during this special tempering process. With praline fillings we achieved a similar reaction. Shelf life and fat migration are improved by this process.
A special piston depositor for aerated chocolate with visible bubbles has been designed as an extension to our combined Tempering & Aeration line. It’s big advantage is that your product will only expand áfter depositing, to form beautiful big, visible bubbles in the chocolate work. | | |
 |
Gateaux lines
For the production of frozen gateaux in a variety of shapes we offer gateaux assembly lines. These lines are always custom built for your particular product and can include the full batter making process:
Raw material intake
Batter premixing
Batter aeration
Depositing in pans or sheet depositing in a continuous oven
Cutting of cake sheets or cutting of pan baked sponges
Our range of complete gateaux assembly lines include:
Production of bavarois
Production of mousse
Production of meringue
Production of cream
Production of topping
Depositing of jams and syrups
From a cake sheet, pre-cut discs can be used as a base.
From ‘tin-baked’ products the cakes are cut horizontally into sheets. This cake base arrives at our gateaux line, where they are transferred to the finishing line. There, the cake is first welted then filled with a cream or mousse or bavaroise.
This filling will be deposited onto the cake; on multiple layer cakes this process is then repeated. Some products can be made in a mould (bavaroise and mousse cakes), while other products are made without mould (flan-like products).
The next step in the process is often to go through a blast freezer for a short period, to ‘skin’ the outside. Thus it is prepared for final decoration before it goes.
| | |
 |
Machinery for the Food and Beverage Industries
Baking Ovens
Confectionery and Baking Equipment
Industrial Ovens | | |
 |
Marshmallow
New center-in-shell extruder-former for encapsulated marshmallow balls.
Tanis Food Tec has recently introduced a new line of equipment for the continuous production of encapsulated marshmallow balls. The equipment principle consists of a continuous extrusion of up to 20 ropes of centre filled mallow. This product is completely dusted with starch and runs into a special forming head, where the mallow is ‘squeezed’ around the centre while the ends are rolled flat. The Tanis Food Tec C.I.S. (centre in shell) extruder – former operates as one machine and produces up to 80.000 pieces per hour. The typical weight of such a product is 2,5 gr for the centre filling and 2,5 gr of marshmallow shell. | | |
 |
Sandwiched biscuits with filling
To make a variety of attractive sandwiches or tartlets, hard rotary moulded, soft wirecut or deposited biscuits & cookies. Bite sizes ranging from 25mm Ǿ to giants of 125 mm in round, square, rectangular or funny shapes.
Soft cookies with pectin jelly filling, sponges with marshmallow, extremely soft emulsion creams , tartlets with caramel.
Cream process
Fat, icing sugar, colour and flavour are mixed together above fat melting point. Therefore no lumb-building and no air inclusion at this point. In the Rotoplus – Temp (aerator – tempering machine) we crystallize and aerate the cream right before depositing.
Marshmallow process
Water, Sugar, glucose and a gelatine solution are mixed together by weight.
The slurry is cooked under pressure to get the correct final moisture content. In the aerator – Temp combi machine this slurry is cooled and aerated to the correct final density and then deposited on the MB&D Cookie Capper.
Pectin jelly
Water, sugar, glucose and pectin are prepared in the same kitchen as the marshmallow.
This jelly product is normally not aerated, but will run straight to the colour, flavour, acid (CFA) mixing system. The pH is measured and automatically adjusted. This product runs straigh |
| |
