|
|
|
Metrofunk Kabel−Union GmbH
|
|
 |
| | |
 |
Cables & lines
Cables & lines | | |
 |
Coaxial cables
Coaxial cables | | |
 |
Your supplier for special electrical wires and cables
We deliver ex stock, quickly and on time | | |
|
|
|
|
Micron Machinery Co., Ltd.
|
|
 |
Flexible Cantilever Centerless Grinder
@‰ÁH•¨’¼Œa(mm) @φ2 ` φ50
@Œ¤í“uΡ–@(mm) @φ610 ~ 205 ~ φ304.8
@˜•t°–Ê Ï(mm) @2,800 ~ 1,600
@–{‘ÌŽ¿—Ê (kg) @6,000
| | |
 |
Midsize Dual-Support Centerless Grinder
@‰ÁH•¨’¼Œa(mm) @φ2 ` φ75
@Œ¤í“uΡ–@(mm) @φ610 ~ 205 ~ φ304.8
@˜•t°–Ê Ï(mm) @2,800 ~ 1,500
@–{‘ÌŽ¿—Ê (kg) @5,500
| | |
 |
Table Top Centerless Grinder
Desk-sized high-efficuency/high-precision centerless grinder developed to satisfy customer demand for a machine that is easy to operate, and requires a minimum footprint. | | |
 |
Tangentialfeed Centerless Grinder
High speed continuous production utilizing a part carrier drum in place of the workrest blade. This mechanism rotates the part past the grinding wheel and when the part passes tangent to the centerline of the grinding wheel the grinding action is complete. | | |
|
|
|
|
microtap GmbH
|
|
 |
TTT - tapping-torque-test system
TTT - tapping-torque-test system
Laboratory comparing measurement equipment
| | |
|
|
|
|
MIKROMAT GmbH
|
|
 |
MIKROMAT 12V
MIKROMAT 12V | | |
 |
MIKROMAT 60S
MIKROMAT 60S | | |
 |
MIKROMAT 8V
MIKROMAT 8V | | |
 |
MIKROMAT G.
MIKROMAT G. | | |
|
|
|
|
Mikron SA Agno
|
|
 |
high speed maching
high speed maching | | |
 |
Ideo 2 a good idea
For unbeatable flexibility and optimal productivity
Flexibility
A unique production system opening new perspectives; more details...
Versatility
A revolutionary concept that fulfills the modern production requirements; more details...
Precision
Of course, it's a Mikron; more details...
Productivity
Two powerful spindles and two efficient automatic tool changers to follow the changing market needs; more details...
| | |
 |
Machining Systems CX Series
Especially Suited for
Volume production of small precision parts from non-ferrous metals, steel or stainless steel
Workpiece Ø ranging from 0,4 to 25 mm
All chip removal operations possible in addition to the assembly of balls or pins, respectively cold forming operations
Machining from premachined blanks or coil material
Features
Fast, entirely mechanically, driven Rotary Transfer Machine
Production up to 150 pcs./min (single cycle)
Excellent accessibility and easy tool change, extremely operator friendly
Possible to machine
| | |
 |
Mikron NRG-50 The concept of the future
Suited for high precision work pieces up to 50x50x50 mm or Ø35x70 mm
Precise
Latest "state of the art" technology guarantees highest precision; more details
Productive
Innovative machining concept for highest performance; more details
Flexible
Change-over, up-grading, adaptability... in shortest time; more details
Versatile
Turning, drilling, milling... machining at different angles... no limits! more details
| | |
 |
Multistep XT-200 Where linear machining comes full circle!
We now present our new innovation, the high-performance Multistep XT-200 with incomparable change-over flexibility, which also proves to be very economical!
Precision
High-tech solutions for a precision worthy of the name Mikron; more details...
Productivity
Multistep XT-200 the "killer" of the "dead-times"; more details...
Flexibility
Change over in few minutes; more details...
Versatility
More than the traditional machining operations; more details...
| | |
|
|
|
|
MIL-TEK DANMARK A/S
|
|
 |
Baling press
Air-Operated baler =
• Low Energy Consumption!
• Fast Pressing Cycle!
• High Degree of Compaction!
• Easy Maintenance!
• Safe Operation!
Very versatile bale press for large amounts of e.g. Cardboard, Plastic, Paper and Big Bags | | |
 |
Can press
Air-Operated Can Press for pressing cans of up to 30 litres:
• No Oil
• No electrical parts
• Safe & easy to use
• Easy to clean
• Takes up very little space | | |
 |
Front loading baling press
Air-Operated Baler for cardboard, paper, plastic and big bags:
• No oil
• No electrical parts
• Safe & easy to use
• Easy to clean
• Fits anywhere
The baler model 205 and 205TS are powerfull balers with very small footprints | | |
 |
Shredder
The number one solution for compacting your EPS (Expandable Polystyrene) minimum 20:1 measured on weight.
Mil-tek EPS Model 900:
• Capacity: 15 kg. per hour
Mil-tek EPS Model 1800:
• Capacity: 80 kg. per hour | | |
|
|
|
|
Miller Weldmaster
|
|
 |
acrylic welding
acrylic welding | | |
 |
hot wedge
hot wedge | | |
 |
Plastic welding
hot air | | |
|
|
|
|
Minimax GmbH & Co. KG
|
|
 |
Our versatile foam extinguishing systems
Storage facilities, incineration plants, refineries or plastics/tyre depots have one thing in common: they pose a special risk. When flammable liquids or plastics catch fire, the fire spreads very quickly and toxic combustion gases are emitted. This results in damages that cost millions as well as environmental pollution.
Foam extinguishing systems are the most effective fire protection for this risk area, particularly in the fire categories A and B.
With a versatile foaming agent range, Minimax offers safe and flexible application. Perfectly aligned components are supplied in line with the individual needs of clients and according to respective fire protection requirements.
| | |
 |
We prevent fires
Structural fire protection helps to prevent and limit fires and to secure escape and rescue paths in the event of a fire. Take preventive measures - with Minimax.
Preventive fire protection must be designed to keep damages to a minimum in the event of a fire. Consequently, structural fire protection installations have to function at all times and be maintained in working order, also in the event that installations are modified or retrofitted. Our nationwide service network ensures the fire-safe state of installations in accordance with regulations, because fire protection is not something that can be postponed.
All Minimax systems are tested and approved in accordance with DIN 4102 and conform to the state of the art.
| | |
 |
We protect the drinking water.
Extinguishing water technology is an indispensable part of preventive fire protection. Water is the no. 1 extinguishant and as drinking water it is also an important resource for our world. Therefore the specific requirements imposed on planning and design of systems, which are directly connected to the drinking water supply, are very high. Minimax extinguishing water systems correspond to valid standards as well as the statutory provisions and guarantee highest possible safety. | | |
 |
We provide fire extinguishers for all fire risks.
In the beginning all large fires were small. And with a fire extinguisher they might have been prevented. We provide the corresponding top quality extinguisher for all ranges of application and all fire classifications.
One thing must be clear from the beginning: the operation of a fire extinguisher. In case of emergency nobody will be in the position to think twice. The operation of our fire extinguishers is very easy because it is standardized.
Our CO2 overcharge is really clever: When entering the extinguishing fluid via a perforated pipe the propellant is fine sprayed and thus, it mixes the extinguishing fluid very well. A constantly high operating pressure is achieved at nearly all operating temperatures. The mixture is not segregated. Thus, a steady extinguishant stream with a constant and very effective extinguishing capacity is provided.
| | |
|
|
|
|
Minini Imballaggi S.r.l.
|
|
 |
Conductive Bag
During falling and emptying high electrostatic charges can be generated on both the product and the container, resulting in a very high electrostatic field. If left unchecked this static build-up may results in the charging of adjacent isolated conductors or in spark discharges which can ignite flammable atmosphere. | | |
 |
FIBC
An FIBC is a flexible container, sometimes called a big bag or bulk bag, made from polypropilene tapes with a capacity up to 3 cubic metres, carrying loads from half tonne to 2 tonnes.
FIBCs are suitable for any free-flowing material in powder, granular or flake form. They are lifted from above by conventional handling equipment such as forklift trucks and cranes. They are the most cost-effective packaging and transport unit load system of all, as they require no secondary packaging or pallets. | | |
 |
Stable Form Bag
After filling, standard big bag becomes cylindrical in shape due to the effect of the filled material. This cylindrical shape is extremely disadvantageous during transportation and storage, definitely because it takes up a large area of volume.
Q-Bag is far more advantageous when it is fully loaded since it keeps its original shape, being more cubical or rectangular rather than cylindrical.
As a result, Q-Bag has gained in importance and its usage and production have greatly increased. Due to the fact that Q-Bag has plain sides, when they are arranged side by side, there are no gaps. This is why it is possible to transport and stock more product by using Q-Bags instead of standard big bags.
So, for the same container space, it is possible to transport and stock 16-23% more product with a Q-Bag than a conventional one. .
| | |
|
|
|
|
MINIPAN S.r.l., Food Processing Machines
|
|
 |
GRX. The SCRAP FREE make up line for FLAT BREADS
The flexibility of GRX® is now powered by an automatic sheeting line featuring the SCRAP FREE® system. Thanks to flanged guaging rollers, the GRESEX® LINE is capable to deliver to the forming machine a sheet of dough accurately controlled in thickness and length, which consent to avoid the nasty re-cut of the sheet edges.
The SCRAP FREE® system is a great development, to reduce toward zero any kind of scrap on the raw product, to obtain a perfect shape, enhancing the production efficiency. With an immediate result: great flexibility with low labour costs.
| | |
 |
Laminators
MINIPAN INDUSTRIAL SHEETING LINES
The top level of the range is populated by a series of reliable and extremely durable machines intended for the most strenuous production environments. Having useful widths from 800 to 1600mm, the industrial GRISS® line is suitable for automatic panning or direct loading on tunnel ovens. Their high performance capability is supported by an endless and unique selection of dough sheeting and preparation solutions, driven by the highest customization available on the market.
With tremendous respect for the artisan recipes, we industrialize production without any compromise, and give taste to the shape of tradition.
| | |
 |
Wire-cut and roll-out biscuit machines
3 cylinders cookie depositor and wire cutter
A new achievement in cookie and biscuit production. Comby³ 800, with its mobile head, a heavy duty and extremely versatile industrial machine, capable to deliver on tunnel ovens or tray conveying systems. Comby³ 800 maintains the traditional features of wire-cutter, extruder and depositor, including Minipan’s 3 cylinder head, now powered by the most advanced technologies: head movement controlled by brushless motor and touch screen control panel. Strong and reliable, Comby³ 800, with its high performance capability, is already a benchmark for the industrial pastry forming machinery field.
| | |
|
|
|
|
The Minster Machine Co
|
|
 |
Coil Line
Coil Line | | |
 |
Controls
The Minster Machine Company offers a complete line of press and production controls and production monitoring software.
Minster's user-friendly controls and software allow for complete system integration for increased production, reduced downtime and increased efficiency. | | |
 |
Presses
Presses | | |
 |
Pressroom Products
Selecting Minster for your press room products and equipment upgrades allows you to tap into the experience of the world's premier press builder.
The press room products offered here have been selected by Minster because of their quality, value and ease of integration. Minster's Application Specialists are able to assist with configurations for any of the press room products whether they will be used in conjunction with existing or new material forming equipment. | | |
 |
Repair Parts
The Minster Machine Company helps you maximize equipment productivity by providing parts and components based on Minster's latest design technology; developing alternatives for parts that are no longer commercially available; and maintaining a large inventory of replacement parts which can be shipped | | |
 |
Twintec Bihler Centers/Minster Presses
New applications demand new ideas. They demand machine concepts that can be flexibly adapted to new manufacturing strategies as applications expand and develop. For example, the combination of Bihler centers and Minster presses for high forming capacities unites all the capabilities of Bihler's multi-technology with the advantages of Minster's progressive press technology for the end-to-end manufacturing of large parts. Bihler has created the optimum mechanical and control conditions necessary for such a venture.
Press variants offering greater or lesser punching capacities can be supplied to meet all requirements. The following diagram illustrates the possible combinations. | | |
|
|
|
|
MIRCONA AB
|
|
 |
Boring heads
MIRCONA offer two different performances of boring heads, with which axial grooves, trepanning or alternatively internal turning can be made with a rotating tool in a milling machine or machining centre. The smaller size (BFG-20) covers diameter range 20 to 60 mm | | |
 |
Groove and slot milling tools
A complete range of slot and groove milling cutters are offered by MIRCONA to cover most machining operations performed by these tools.The MIRCONA slot milling cutter is used for deep grooving or cut-off. Due to the design of the patented clamping system, consisting of a sprung loaded integral top clamp, the clamping force on the insert increases proportionally with the cutting force. The clamping is based on a reverse angle on the insert seat, which effectively ”dove tails” the insert into position and completely eliminates the risk of the insert being thrown centrifugally out of the milling cutter body. | | |
 |
MIRCONA micro-lubrication system
Average cost for use of conventional cutting fluids lies on approximately 17 % of the ennobled product value, and the fluids are the cause of a not desired, influence of the surrounding environment.
These problems are eliminated with the new MIRCONA micro-lubricating system.
The system is based on the use of a biological oil that through a ”minibooster” is turned into micro-drops of oil and air, which in turn are supplied through the applied tool holder onto the cutting edge. For the system as a whole the following is valid;
The lubricant is fully biological and lacks toxic additives, which implies that nor man or environment is affected or damaged.
A complete system that replaces existing conventional cutting fluid systems.
An oil consumption of 2 - 10 ml an hour, without leaving any waste.
A lower machining temperature is achieved, which makes machining of close tolerances and fine surface finish possible.
| | |
 |
Parting-off and grooving tools
MIRCONA offer the largest range on the world market of parting-off and grooving tools. 25 different tool types are manufactured and stocked in more than 3000 different tool holder performances. | | |
 |
Special purpose tools
Specially adapted tools manufactured in accordance with your requirements and instructions - MIRCONA can offer you specially adapted tool holders and inserts for most machining applications.
To save time and cost the extensive MIRCONA range on standard cutting tools is utilised, which, with as few modifications as possible, are converted into exactly the special purpose tool required by you to solve your machining problems
| | |
|
|
|
|
MIT Moderne Industrietechnik
|
|
 |
Ball valves
Ball valves | | |
 |
Butterfly valves
Butterfly valves. | | |
 |
Stainless steel valves
Stainless steel valves | | |
|
|
|
|
Mitex Gummifabrik Hans Knott GmbH
|
|
 |
Brush Rollers
Paster Rollers in the Gravure and Offset Printing
Since a few years MITEX is using brush roller as covering for the paster roller in the splicing process with great success. | | |
 |
Cleaning Rolls
Remove dirt and dust from your final product"
Cleaning rolls for sensitive materials like metal, plastic, film, paper, steel and many other applications.
The tacky surface removes dirt and dust from sensitive surfaces | | |
 |
Measuring Rolls
Shapemeter Rolls / Stressometer Rolls
MITEX manufactures special coverings based on high temperature and wear resistant materials. MITEX is world-wide supplier of Sundwig shapemeter rolls and ABB stressometer Rolls.
The coverings are adapted to the conditions in the rolling process. They are world-wide available and offer optimised properties. A constant roughness and the excellent rolling oil resistance are the important features of these materials. | | |
 |
Products - Plastic Industry
In extrusion, hot melt and lamination lines MITEX roller coverings are used for the manufacturing of plastic film and foils and for the converting process of paper and cardboard.
High tech foils, composite materials, embossed dashboard coverings for automotives, hygienic medical care materials, adhesive tapes, reflective foils for license plates, coverings and other special tapes are manufactured with MITEX roller coverings. | | |
 |
Siegling Hannover - Largest calender in the world for the production of transport belts
MITEX superfinished, temperature resistant embossing rolls have set new standards in the holographic industry. At maximum production speed the high performance materials withstand extreme temperatures, ozone, UV light, high voltage and aggressive chemicals.
MITEX high performance silicone THERMODUR offers excellent mechanical properties and optimal heat conductivity up to 4,5 BTU on heattransfer and chill rollers. | | |
 |
Special Rolls/Rollers
MITEX coverings for your applications:
• Drive Wheels
• Jockey Wheels
• Sandwich rolls
• Complete manufacturing of sandwich rollers
• Paster rollers/sponge coverings with highly resilient covers
• other rolls, rollers and wheel applications
with high performance materials made of rubber, polyurethane and silicone in a hardness range from 20° Shore A to 85° Shore D.
| | |
|
|
|
|
Mitsuba Mfg. Co., Ltd
|
|
 |
Fluoride Resin Tube Line
Tubes with stable diameters can be produced by means of outer gauge sizing. The thickness gauge can also be controlled. | | |
 |
Four-Layer Resin Profile Extruder
By analyzing the capillary rheometer data of each resin, extrusion heads with superior resin flow characteristics can be designed.
Screw design can also be optimized, even for the most difficult to handle material, by testing the material in advance. | | |
 |
Gear Pump for Rubber
When combined with a feeder extruder, the MITSUBA Gear Pump can achieve low temperature extrusions and high precision extruding operations.
As a key component in our next-generation extrusion systems, our gear pumps are anticipated in a wide range of applications. | | |
 |
Multi-layer Extruder
Our experience in automobile body seals (metal inserts, etc.) is quite extensive.
The pin extruder has good effects on high viscosity solid rubbers, leading to improved product quality.
| | |
 |
PE Pipeline
High performance outputs are achieved by MITSUBA original screw and cylinder designs.
Our technology is also applied to Cross Linking PE | | |
 |
Three-layer Medical Tube Line
High-precision extrusions can be performed by adopting a gear pump.
The thickness of each of the three layers can be continuously changed with MITSUBA's original control technology.
| | |
|
|
|
|
MICRODYN-NADIR GmbH
|
|
 |
BIO-CEL
Biological wastewater treatment with submerged membrane modules in the form of membrane bioreactors (MBR) is the process of the future.
This advanced membrane technology offers operational safety, high efficiency and cost effectiveness. MBR’s produce a high effluent quality which cannot be achieved with typical conventional systems.
The new BIO-CELmodule combines for the first time the advantages of submerged hollow fiber and flat modules.
This application of self-supporting membrane sheets allows the construction of modules with high packing density.
| | |
 |
BIO-CEL submerged membrane module for biological wastewater treatment
Advantages of the BIO-CEL
• Absolute separation of bacteria and suspended solids
• Resistant to clogging e.g. with hairs and fibers or sludge
• High packing density due to self-supporting membrane sheets
• Efficient use of surface area by a hydrodynamically optimized design
• Effective membrane cleaning with permeate
| | |
 |
Nadir Membranes and Formats
Advantages of NADIR Membranes
• High flux capacity
• Exact cutoffs
• Partially back washable
• High thermal and chemical resistance
NADIR membranes are permanently hydrophilic. These chemically resistant membranes with this unique property are manufactured by NADIR Filtration in a specially developed, patented process.
The unequalled hydrophilic properties of NADIR membranes increase performance (higher flux) and longevity and significantly reduce fouling tendencies
NADIR membranes are available with cutoffs covering the full spectrum of micro-, ultra- and nanofiltration.
NADIR membrane polymers consist of:
• permanently hydrophilic polyethersulfone and polysulfone
• extremely hydrophilic, highly solvent resistant cellulose PVDF. These materials can be used over a wide range of applications.
• PVDF
These materials can be used over a wide range of applications
| | |
 |
SEPRODYN Modules for Finest Filtration
Advantages in the use of SEPRODYN-Modules:
• Flow conditions in the membrane tube are well defined
• High packing density per module
• Unused space inside the module is minimized
• The membranes can filter in both directions
• Membranes can be cleaned through back-washing with filtrate or cleaning solutions
• Extreme stability against chemicals and abrasion | | |
 |
SPIRA-CEL Spiral Wound Modules
Advantages of SPIRA-CEL Spiral Wound modules
• High packing density
• High thermal and chemical resistance
• High quality standard
• Economic and simple module replacement
• Diversity in module sizes
| | |
|
|
|
|
MICROBORE TOOLING SYSTEMS LTD
|
|
 |
Gear Adjust Tooling
The MICROBORE Gear Adjust "GA" tooling system provides additional ease of adjustment, accuracy and
precision for use in conjunction with standard
MICROBORE fine boring cartridges.With a graduated
dial wrench, fast adjustment of the MICROBORE
cartridge is achieved through the mating worm and
helical gear to achieve precise diameter setting in
2 micron increments.
• Standard "GA"boring range 7mm to 475mm.
• Dynamically balanced "GA" boring heads for 7mm 27mm bore diameter.
• Standard boring bars for 23mm to 134.5mm bore diameter.
• Standard "GA" boring rings for 93mm to 475mm bore diameter.
• Special "GA" boring bars are designed for specific customer applications.
| | |
 |
Lay-In Cartridges
To complement MICROBORE design and manufacture of special tooling, Lay-in cartridges offer ISO insert designation of the most common inserts, allowing special tooling to be manufactured to a customer’s design with a degree of adjustment and flexibility.
| | |
 |
MICROBORE FINE BORING CARTRIDGES & UNITS
The MICROBORE micro adjustable fine boring cartridges and units pioneered the provision of quick, easy boring tool adjustment while holding precise limits of accuracy. MICROBORE offers more standard cartridges in more sizes and in more grades, including the provision for indexable inserts, than any other manufacturer of adjustable cutting tools, to ensure that, the correct tool geometry can be selected for a specific application.
Select from:
• ISO triangular, centre screw, indexable
insert cartridges.
• ISO 80º Rhomboid, centre screw, indexable insert cartridges.
• Posicut 75º Rhomboid, centre screw, indexable insert cartridges.
• ISO Triangular, pinlock/clamp headed indexable insert cartridges
both boring and turning applications using industry standard carbide
or diamond inserts.
• Brazed, carbide tipped cartridges for square (90º) or angular mounting.
• High speed steel cartridges.
| | |
 |
Short Hole Drills
The MICROBORE indexable Short Hole Drill ranges offer a wide selection of high speed/high feed drills that will produce a hole from solid prior to finish boring. The whole range will machine to depths of 3 x diameter with through coolant for
chip removal and long insert life. All drills throughout the range offer the following qualities:
• 80° - drill styles.
• Unique geometry for accelerated swarf evacuation.
• Composite shank for lathes and rotary tool holders.
• Self centering drilling, even on uneven surfaces.
• Low axial and balanced radial cutting forces.
• Quick and simple insert changing.
• Special spiral flute design to eject the chips rapidly and efficiently
• Special drills made to customer specification.
| | |
 |
Standard Boring Bars & Boring Rings
A comprehensive range of standard boring bars and boring rings, with sizes and shanks to suit the vast majority of milling machine, boring machine and machining centre applications, is available to complement the MICROBORE fine boring cartridges and units.
| | |
 |
Twinbore Tooling & Tribore Tooling
Twinbore (2 cutting edges) and Tribore (3 cutting edges) provide a range of heavy duty rough boring
tools which enable high metal removal to yield increased productivity while maintaining levels of accuracy which in most cases will eliminate the need for semi-finishing operations. Whether used in the standard or step boring arrangement, the rigid design has proven successful in the machining of bores with noncentral
cores and Tribore is ideally suited to the machining of bores with interrupted cuts where the rugged construction is essential to absorb the resultant cutting forces.
• Twinbore boring range 28mm to 1,015mm.
• Tribore boring range 48mm to1,015mm.
• Each cutting edge can be independently adjusted for accurate setting of the bore size.
| | |
|
|
|
|
Micro Air
|
|
 |
Air purifier
The industrial models offer three types of filtration. Media units utilize a series of filters to collect the particulate. These include pre-filters, media bag filters, HEPA filters, and charcoal modules. The unit can be configured with any combination of media to most effectively capture the specific particulate or fume. | | |
 |
Dust collector
Micro Air® dust collectors utilize cartridge filtration and are available in a large range of configurations up to 24 cartridge models. All are sized and rated for the proper air-to-cloth ratio to solve a wide variety of applications such as weld smoke, powder dust, grinding dust, paper dust, etc. | | |
 |
Mobile welding fume filter extractor
Micro Air manufactures a complete line of portable collectors. from the M2150 media collector, for light duty or small volume applications to the MC1500 cartridge collector for heavy duty production.
Cartridge units utilize self-cleaning, high efficiency cartridge filters, that reduce filter replacement costs, as the filter elements are continually cleaned by compressed air. All Micro Air cartridge collectors utilize Micro Air's exclusive Roto-Pulse cleaning system. Because this cleaning system cleans the entire surface of the cartridge, it has proven to be far more effective, than the traditional reverse-jet system, thus extending filter life. Cartridge collectors can also be equipped with HEPA filters or Charcoal Modules. | | |
 |
PORTABLE COLLECTORS
Portable Collectors Product Specifications
Micro Air manufactures a complete line of portable collectors. from the M2150 media collector, for light duty or small volume applications to the MC1500 cartridge collector for heavy duty production.
Media units utilize a series of filters to collect the particulate. These include pre-filters, media bag filters, HEPA filters and charcoal modules. Any of the media units can be configured with any combination of media to most effectively capture the specific particulate or fume.
| | |
 |
SOURCE CAPTURE EXHAUSTER ARMS
Micro Air® model SCA exhauster arms are used on a wide variety of fume and particulate exhaust applications. Designed to control airborne pollutants at their generation point, SCA arms can be equipped with a motor to vent outside, or used with Micro Air® air cleaners or dust collectors to filter the material and then return fresh air back into the facility. | | |
|
|
|
|
Metso Panelboard
|
|
 |
Bark handling, storage and biomass drying
Bark handling and storage
The bark from the debarking process can be transformed into useful energy in the mill's power plant. The energy value is dependent on the dry content of the bark.
Metso Paper has supplied several hundred bark presses, systems and equipment for handling and storage of bark worldwide:
bark shredders
bark crushers
disc scalpers
drum chippers for bark
MagicChute bark presses
receiving pockets
bark silos
bark stockpiling and stackers
RecAll storage and reclaiming systems
traversing reclaimers
rotary reclaimers
| | |
 |
Chip handling and storage
Metso Paper supplies all the systems and equipment needed for handling and storage of chips, including
rechippers and ChipCutters
chip receiving pockets
disc scalpers
chip silos
chip stockpiling and stackers
GentleStore storage and reclaiming systems
RecAll storage and reclaiming systems
RotaRecAll storage and reclaiming systems
traversing reclaimers
rotary reclaimers
Our storage systems operating on the FIFO principle are designed to maintain the high quality of the chips while they are in storage. All our reclaimers provide 100% automatic and reliable reclaiming to prevent chip pile deterioration. | | |
 |
Chip screening
A screening stage is often necessary to achieve the uniform chip size demanded in different processes.
EasyScreen
CSR chip screen
EasyScreen and CSR chip screen are designed for effective removal of oversize and fine fractions from the chip flow.
| | |
 |
Chipping
The impact of chip quality on pulp and paper quality is indisputable.
Metso Paper's outstanding chipper designs are:
Camura GS chipper
Carthage chipper
Camura GS incorporates the benefits of eleven different patented features. Its chipping geometry produces more uniform chips with an extremely high accept content and high raw material yield. Camura GS was developed with over 100 years of chipping expertise gained from the famous Carthage, Murray and Rauma chippers.
In addition to the chippers Metso Paper offers a High Chip Quality Package to improve the total quality and economy of the chipping process:
GentleKnife system
DuraKnife system
QuickLock
EasyTool
EasyTurn
ZeroGap
SmartDiagnostics
EasyDrive
VisiChips
Total Chipper Service | | |
 |
Woodhandling
Metso Paper's wood processing expertise is based on over one hundred years of worldwide experience in the business. Our scope of supply covers wood processing solutions from single machines to complete wood handling lines and plants as well as various services needed in the pulp, paper and panelboard industries.
Metso Paper's innovative wood processing solutions are designed to treat valuable wood raw material as gently as possible to make it ideal for further processing and to get the best possible yield from it. | | |
|
|
|
|
Metso Power Oy
|
|
 |
Crusher for raw material
We stock the most complete line of high quality laboratory and pilot-plant products for sample preparation and size reduction. Available immediately for mining and industrial applications.
Metso Minerals supplies bench scale jaw crushers, and cone crushers under the Marcy, Morse and Nordberg brand names. These units come in a variety of sizes to provide operators with laboratory mineral processing circuits. | | |
 |
cymic & boilers
cymic & boilers using CFB technology | | |
 |
Metal and waste recycling machine
Among scrap processing techniques, shredding offers the greatest potential for quality scrap production. We at Metso Minerals know how every detail must be designed and carried out for efficient long-term shredder operation, based on our experience gained from supplying a large number of Lindemann shredder plants.
Our new generations of energy-efficient high-performance Power Zerdirators, Shredders and Kondirators have proven themselves, providing high plant availability and increased process flexibility.
Lindemann Shredders are available as single machines and turn-key plants. They can be used by metal recyclers, municipal waste incineration plants and non-ferrous metal remelting industry. | | |
|
|
|
|
Metzl & Seitz Industrieautomation GmbH
|
|
 |
assembly workstations
assembly workstations | | |
 |
Assembly, test and packing machine for automotive clutching systems
Assembly, test and packing machine for automotive clutching systems | | |
 |
handling equipment
handling equipment | | |
|
|
|
|
Metzner Maschinenbau GmbH
|
|
 |
| | |
 |
Cable and Corrugated Tube Processing
Metzner automatic cable processing machines are powerful, precise and exceptionally versatile to use and, in addition, are surprisingly simple to operate and program.
Besides processing with V-knives and double-blade cutting heads, we can also offer you vital processing with a rotary cut for various series, which offers crucial advantages in processing coax and other demanding cables. | | |
 |
Cable processing machines, cutting and stripping
AM 2000: With us, your requirements are the main focus.
Automatic cutting- and stripping machines from Metzner, like the AM 2000 series, are specially designed for your requirements: Process reliability, flexible and fast production, minimum set-up times, as well as user-friendliness, low noise level and a standard scope of equipment which is unique in this class, define the benefit profile of these machines.
| | |
 |
corrugated tube machines!
Standard and split corrugated tubes and flexible conduits are used for protecting cables and wiring harnesses. Cutting these protective coverings to length depends on cutting accurately on the crest of the ridge. Otherwise sharp cut edges are formed which results in damage to the drawn in cables. The models in the CT series are an example of absolute precision: They process the corrugated tubes precisely on the crest of the ridge guaranteeing a high quality result. Metzner corrugated tube machines are also designed to process a broad range of tubes and hoses. | | |
 |
Cutting to length
When length precision and cutting quality are important for cutting in the cable assembly, Metzner automatic cutting machines are the right equipment for the job. They allow round and flat materials to be perfectly cut. Whether it's cables, cords, wires, flat cables, tubes, profiles, paper or labels – Metzner cutting machines can handle these requirements.
Metzner has been a leading manufacturer of elastic material cutting machines for many years and offers an additional range of machines for rubber and plastic processing.
| | |
|
|
|
|
Meusburger Georg GmbH & Co Formaufbauten
|
|
 |
Ancillaries
Two-stage ejectors
hydraulic, strong and compact
Can be used in two different ways - there is a leading and a following type
Hydraulic channels can be integrated into the ejector set
Have zero backlash and are especially useful where demoulding requires high forces
| | |
 |
F-plates
Precision-engineered standard moulds made from high-grade steel after stress-relief heat-treatment
Lever slots at the mould plates without additional charge
The reference edges of the F 50 mould plates have a tolerance of 0.01 mm c/c to the guide bores | | |
 |
FB split tool
Coordinates compatible with F-plates
The sliding cores cover the full length of the mould
A solid closing plate ensures optimum force transfer to the slides
The favourable ratio of length to width of the guide and the central inclined pin prevent any jamming
Robust and fully aligned guide system
3D-Data in various formats are available to designers | | |
 |
N-bars
Extensive stock programme in 10 mm increments up to a width of 500 mm
Width/length sawn with machining allowance (+4/+6 mm), thickness ground (+0.40/+0.45 mm)
In all common steel grades (now also in 2085)
For use in many applications - mould making, tool making, die and punching tools | | |
 |
P-plates
Plates that are machined on all sides for all applications in mould and tool making as well as for gauges and rigs
Heat-treated for stress relief to enable low-warp processing
Milled to tight tolerances, thickness precisely ground | | |
 |
Round bars
Round material for inserts and cores as well as jig making
High-grade steel with stress-relieving heat treatment
Diameter pre-turned, length sawn with oversize | | |
 |
Standard parts for moulds
Standard parts for moulds | | |
|
|
|
|
MeWa Recycling Maschinen und Anlagenbau GmbH
|
|
 |
tyre recycling plant
tyre recycling plant | | |
 |
E-Scrap-Recycling
Setting global standards
The heart and soul of our WEEE recycling system is the UNI-CUT® QZ Universal Querstromzerspaner.
The procedure utilised achieves unrivalled results in regard to environmental impacts, recycling quotas and profitability. Average intakes of up to 15 t/h are attainable. The system was developed on the basis of the EU directive (WEEE) and exceeds all mandated standards and criteria.
Having installed 50 recycling systems worldwide, MeWa is the leading provider of technology in the electronic scrap-processing sector.
| | |
 |
oil filter recycling plant
oil filter recycling plant | | |
 |
refrigerator recycling plant
refrigerator recycling plant | | |
 |
Refrigerator-Recycling
Cool inset for environmental protection
Through investigative development work, the MeWa cooling recycling system defines a new brand of technology with regard to effectiveness and profitability.
Our Querstromzerspaner QZ is characterised by its process recovery of nearly 100% of the FCKW or pentane found in old cooling systems. The results achieved exceed the mandated standards set in the EU, and contribute to the protection of the ozone layer.
| | |
 |
Tyre Recycling
Whether from cars, lorries or light construction machine tyres - our tyre recycling systems will process them all - without any manual pre-processing. The concept involves pre-shattering, fine granulation and flexible separating techniques. | | |
|
|
|
|
MEWAG Maschinenfabrik AG
|
|
 |
3 axis tube and profile bending machine
Bending capacity
ø 15 /ø 20 / ø 42 / ø 60 / ø 90 / ø 100 / ø 120 / ø 150
Short description
- Forward drive (L), rotation (R), bending (A), and additional axes are electronically, CNC controlled
- Ideal for shift production with tubes having normal to complicated geometric forms.
- Free form protruding bending head
- Left and right bending
- Using a modern control system
| | |
 |
Automatic bending and machining machine
Production using robots
- Automatic production line for the manufacturing of bent parts
- Work Steps, Bending / Pressing and foam insulation covering | | |
 |
Automatic tube bending machine
Bending capacity
ø 15 /ø 45 / ø 60 / ø 76 / ø 100 / ø 150
Short description
- Forward drive (L), rotation (R), bending (A), and additional axes are electronically, CNC controlled
- clamp die and pressure die positioning with additional CNC electronically controlled axis
- Ideal for shift production with tubes having normal to complicated geometric forms.
- Two free form protruding bending heads
- Eight or more sets of bending tools can be used during the same production sequence
- Automatic left and right bending direction
- Using a modern control system
| | |
 |
Cutting and Bending
- In the revolving magazine 350 tubes having a length of 6 meters are fed separately into the bending machine.
- The tubes are bent, cut to length and placed in various containers.
| | |
 |
MEWAG production centre
The MEWAG production centre provides manufacturing services for the following;
- Tube and profile bending,
- Welding & general locksmith work,
- Machining and various product.
- Machine housing construction
Customers experiencing delivery delays of tubes, profiles or bending machines can request the support of our MEWAG manufacturing centre to complete urgently needed tube parts. When the production work load of a company exceeds the manufacturing capacity MEWAG is pleased to assist and regulate production.
The manufacturing centre is in continual contact with the requirements of our customers.
New fabrication techniques and production methods together with the latest machining standards are continually updated that the acquired knowledge is permanently available to in design and construction. | | |
 |
ZiDrill
The larger and powerful CNC machine for the production of serial parts also for drill dimensions of drill diameter from ø 2 to 16 mm with a drill depth of 550 mm. | | |
|
|
|
|
Meyer Industrie-Electronic GmbH
|
|
 |
Incremental, Absolute and Bus Encoders
Incremental, Absolute and Bus Encoders | | |
 |
Relays
Relays | | |
|
|
|
|
MEZGER Heftsysteme GmbH
|
|
 |
Automatic machine for stapling empty and filled carton
Automatic Stapling Machine SHM LRS-B 6/X for stapling carton bottoms and lids of filled folding boxes with overlapping flaps.
Coiled staples are firmly anchored in the carton by clinching anvils.
| | |
 |
Automatic Stapling Machine SHM LRS-B 6/X for stapling carton bottoms and lids of filled folding boxes with overlapping flaps.
Stapling Heads for Coiled Staples,
basic versions A, B, C, D
Complete pneumatic stapling and nailing units with automatic feed travel for stationary applications in stapling devices and special purpose machines.
| | |
 |
Blind stapling head for coiled staple
For closing filled folding boxes by means of coiled staples designed as blind staples which means that the staples are automatically clinched without clinching anvils.
| | |
 |
Box bottom stapling machine
L 323 Single head, foot operated
L 323 D Twin heads, foot operated (2 stapling operations simultan.)
Bottom-stapling folding boxes with joining flaps with stapling pillar for bottom stapling empty folding boxes made from solid or corrugated cardboard.
| | |
 |
Box bottom stapling machine with 4 stapling heads
RECORD P 323 SP with 4 stapling heads. 2 staples automatically placed longitudinally, 2 (or more) at an angle of 45° exactly over the carton flap joint | | |
 |
Carton stapler
SGR 2/QE B 36-60, Cross Stapling
SGR 2/LE B 36-60, Longitudinal Stapling
Pedestal with 2 side arms for stapling carton blanks, carton trays, carton sleeves etc. made from solid or corrugated cardboard. | | |
 |
Long handle stapler for oversized carton
Long-handle staplers are used to close the bottoms of oversized folding boxes and for nailing such boxes onto wooden pallets.
These mechanical staplers are easy to use independently of all energy sources. BL 535 used for strong double and triple-layered corrugated cardboard.
| | |
 |
Nail gun for nailing carton onto wood
TACKER N 200 ZH 16 with POGOSTICK
Well suited for nailing cardboard with large sized staples
23 mm crown size.
Loading capacity: 150 king size staples.
| | |
 |
One-handed blindstapler for box closing
For one-handed operation.The operator has one hand free to shape the carton. Empty cartons can be bottom-stapled. Staple from inside to outside | | |
 |
Pneumatic blind stapler for carton closure
Blind stapling without clinching anvils, with silencer.
The operator has one hand free to shape the carton.
Empty cartons can be bottom-stapled. Staple from inside to outside.
| | |
 |
Pneumatic carton stapler with coiled staples
MEROLOCK 3 soundproofed stapler with 1000 coiled staples is used for closing filled folding boxes made from corrugated cardboard. | | |
 |
Pneumatic stapler
For closing filled folding boxes made of strong double
and triple corrugated cardboard. | | |
 |
Side arm stapler
Side Arm Stapling Machine ST Q 270 with stapling arm for mechanical or pneumatic stapling carton blanks, carton carrying handles, insert lids, cardboard blanks, trays etc..
| | |
 |
Side arm stapler with one stapling head
SGR 1 Pedestal with side arm and 1 stapling head for
stapling carton blanks, carton trays, carton sleeves etc.
made from solid or corrugated cardboard.
| | |
 |
Stapling hammer
Light Stapling Hammers A 11 for nailing thin materials such as foils, textiles, papers, thin cardboard etc. onto wood. With ergonomic handle. Loading capacity: 168 staples, weight: 960 gm. For staples with 11 mm crown and 6, 8 and 10 mm leg length.
| | |
 |
Stapling pliers
Versatile hand stapler for stapling each kind of box blanks, carton trays etc. of solid or corrugated cardboard.
Very strong stapling due to flat by-pass legs 10 - 16 mm.
Available in hand and pneumatic version. Special execution with 250 mm clinching support available. | | |
 |
Stapling pliers for strong cardboard
Z 200 ZH 16 Plier
for strong cardboard up to a max. thickness of 30 mm.
For staple: crwon size: 23, leg length 19 - 38 mm.
| | |
 |
Tabletop stapler with 1 - 3 stapling head
Stapling device as a table-top unit for stapling of cardboard headers onto polythene bags, paper-bags, blister packages and carton strips. | | |
 |
Tray forming and stapling machine
forms and staples large carton trays in Semi- and Eurosize in different measurements. | | |
 |
Tray forming and stapling machine
forms and staples large carton trays in Semi- and Eurosize in different measurements. | | |
|
|
|
|
MHF GMBH
|
|
 |
Double unrolling units
with automatic attachment for a continuous process.
| | |
 |
Intake station
with dusting brushes broad surface brush that can be steplessly adjusted for height. Infrared beams that can be rgulated an adhesive application.
| | |
 |
MHF double cross cut saw DGS
cut to size profiles, working width: 2.600 mm (other widths possible). 2 motors rotation speed adjustable, sawaggregat 45°...90°...-45° adjustable Digital scala.
OPTIONS:
2 lamello moulding units / 2 dowel units / position control
| | |
 |
MHF flying saw
to cut endless profiles with horizontal or vertikal sawing support, heavy contruction, welded baseframe motor 2,6 kW rotation speed frequency controlled support drive with 3 servo motors for x-, y- and z-axle, electric controlled and high capacity.
| | |
 |
Portalsystem
depositing with accommodate lifting platform for a high frequenzy.
| | |
 |
Profile wrapping system WS 300 DA.
with nozzle application up to 300 mm and premelter extruder for coating with paper, PVC and CPL.
Adhesive: EVA, PO and PUR hot melts.
| | |
|
|
|
|
MHG Heiztechnik GmbH
|
|
 |
Gas heating boilers
Gas heating boilers | | |
 |
Gas units
Wall-mounted ProCon gas condensing boilers
Output ranges from 4 to 15 kW, 6.5 to 25 kW, 12 to 45 kW
From a flat, through detached houses and apartment blocks, to commercial properties - the wide range of wall-mounted ProCon gas condensing boilers with their various equipment packages leaves nothing to be desired.
The space-saving ProCon devices can be installed practically anywhere in the house - this is made possible by their attractive design and in particular by their low-noise operation.
Particularly low heating costs as a result of low fuel consumption with a high standard performance level.
High-performance, stainless steel heat exchangers guarantee high reliability and long service life.
Particularly cost-effective maintenance as a result of easily accessible construction.
The option of using inexpensive and at the same time high-quality plastic exhaust systems, cost-effective flue renovation.
Modern, appealing design
Integrated, calorifically optimised, convenient control system, extremely simple adjustment and operation
The ProCon GWB 25 S and the ProCon GWB 45 S offer the ultimate in hot water luxury, with an integrated plate heat exchanger and a three-way changeover valve for heating drinking water by the continuous flow principle.
Extremely flexible adaptation to all types of heating requirements: The ProCon GWB 25 S modulates between 6.3 and 24.2 kW. In its 45 S version, the gas condensing boiler covers an output range from 11.7 to 43.5 kW. At 15 l/ min (25 S) or 20 l/ min (45 S), the ProCon delivers the ultimate hot-water output, continuously heating drinking water from 10 °C to 40 °C.
Design and technology in perfect harmony: You can choose between a wall-mounted THERAMAT EMW hot water storage tank, holding 60 litres, and a floor-standing THERAMAT EMT hot water storage tank with a capacity of 120 litres.
ProCon Plus:
The highlight: The Plus version minimises consumption through the use of modulating pumps.
The modulating pumps ensure that only the amount of water that is actually required flows into the heating system – a requirement for keeping heating costs as low as possible on a long-term basis.
Lower power consumption than conventional pumps
ProCon Kompakt:
Combination of a gas condensing boiler and an 80-litre stratified hot water storage tank.
Infinitely variable modulation between 6.5 and 25 kW.
High energy efficiency along with the ultimate in hot-water luxury.
The appliance is supplied entirely preassembled, and takes no time at all to install.
Especially simple, clearly accessible construction, for convenient operation and time-saving maintenance.
Tailor-made hot water luxury: In the MHG heating technology range you will find a large number of other THERAMAT enamelled or stainless steel hot water storage tanks, holding up to 500 litres.
All the devices in the ProCon family can be combined perfectly with our SOLARMAT thermal solar energy systems for further heating cost savings.
| | |
 |
Oil and gas burners
Oil and gas burners | | |
 |
Solar plants
Solar plants | | |
|
|
|
|
MHG Maschinenfabrik Hombak GmbH
|
|
 |
Wood and fiber materials
Wood and fiber materials recycling technologny | | |
|
|
|
|
MIAG Fahrzeugbau GmbH
|
|
 |
3-wheel explosion proof electric forklift truck
3-wheel explosion proof electric forklift truck | | |
 |
Automatic guided vehicle (AGV)
- Lifting height up to 2,8 m
- Both way material transfer
- Minimum space requirement | | |
 |
Explosion proof diesel engine forklift truck
- Creep speed option allows quick lifting at slow speeds
- Car like with only one accelerator and one brake pedal
- Manual foward and revearse gear
- cabin or all-weather protection available for outdoor use. | | |
 |
Explosion proof electric pallet truck
Explosion proof electric pallet truck | | |
 |
Explosion proof electric reach truck
Explosion proof electric reach truck | | |
 |
Explosion proof high lift pallet truck
Explosion proof high lift pallet truck | | |
 |
Portable lift platform
- High stability of the platform
- Large platform-size (10 / 15 m2)
- Precise manual control via Joystick | | |
|
|
|
|
Michael Weinig AG
|
|
 |
Autom. planers and moulders
As simple as that — the WEINIG Variomat:
Longitudinal and end profiling in one
The Variomat is the only moulder in the world today that can handle four-sided planing and profiling, and longitudinal and end profiling of workpieces. The Variomat is just as flexible as you are and can grow to keep pace with your requirements. Its secret is simple: retrofit modules.
We develop our technology for your benefit: Equipped with the WEINIG Memory system and featuring PowerLock technology, the user-friendly Variomat can be reset in a matter of seconds. Once produced and stored, a profile can be reproduced at any time with maximum precision and minimum setup effort. Available in two different tool arrangements with four or five tool holders, each of which can be supplemented by a multi-function table. The Variomat will grow with your future needs!
| | |
 |
Cross-cut saws
OptiCut C 50 - safe and fast cutting to length
The DIMTER OptiCut C 50 is a cross-cut saw that even as a manual chop-saw is certified under strict safety standards as it has a two-hand-operation control and a safety shield. Optional rollertables on both sides of the saw guarantee an easy transport of the working piece. Pneumatic clamping and precise stop devices assure high length- and angle-accuracy. The OptiCut C 50 can be upgraded to a full optimizing cross-cut center S 50, if the demands on cross-cutting increase in the production
| | |
 |
Finger-jointing lines
Shortwood lines
In accordance with your requirements the machines can be upgraded on the basis of a flexible modular system. The specific use of modules does not only allow standards but also customer-specific solutions – for finger-jointing lines with wood entry lengths smaller than 1000 mm but also customer specific solutions with wood entry lengths larger than 1000 mm.
This principle can be used for all performance classes. From the entry model ProfiJoint via the models Ultra, CombiPact and Turbo-S to the heavy-duty class of the flat finger jointing lines HS120 and HS180. All in all, system concepts for the highest demands of quality in all performance classes.
| | |
 |
Gluing
The new Dimter ProfiPress L-Series – Flexible, Compact, Compatible
You want the flexible board production with (dead straight and) lastingly closed joints? And this with the easiest operation?
We have the solution: The new press generation ProfiPress L from the company Dimter has been especially developed for the flexible production of solid-wood boards: The board carpet freshly covered with glue is moved into the press in longitudinal direction. The heavy cover closes. No vertical step joints in the board! It does not make any difference what board width you move in: The positionable pressure straight-edge adjusts automatically to the new width: no costly resetting required! Pressure elements, tightly arranged, let the full pressing power have an even effect over the entire length of the pressing bed also in case of tolerances. Continuously closed joints are the result. Tolerances in width are simply equalized. Precisely controllable high frequency technique hardens the joint completely in a fraction of the normal pressing time.
The new sliding technique of the ProfiPress L provides the flexibility of your production with an additional thrust.
Depending on demand the ProfiPress L can be upgraded in the modular system: From the simple basic machine up to the highly automated production line with automatic feed systems and board cutting.
With the ProfiPress L – Series the gluing of solid-wood boards is the connecting conclusion of the complete processing with products of the Weinig Group.
1/1Zoom
| | |
 |
Rip saws
The universal genius from RAIMANN:
FlexiRip is the synonym for the flexible size cutting line
Efficient utilization opportunities for every size of a company: In minor, medium-sized or major plants – everywhere planks, boards or panels are cut, the FlexiRip made a good name for itself as universal, flexible longitudinal buzz saw. Predominantly the good production performance, the optimal wood yield, the fast change of saw blades and the comfortable one-man operation are held in high regard by the customers. FlexiRip is the name of the solution when you talk about universal uses in solid wood cutting.
The name RAIMANN stands for user-friendly, rationally producing buzz saws. The longitudinal buzz saw FlexiRip is a clever development towards the cutting saw for different way of utilization.
Ripping down, cutting-off, diagonal cutting, mitre cutting, cutting, longitudinal and cross cutting – everything with just one machine. Any amount of flexibility for any business demands: In combination with a cut-off saw expandable into a heavy-duty size-cutting line and
| | |
 |
Rip saws ProfiRip series
Cutting Solutions from RAIMANN – Optimize your Wood Yield
Width cutting, generally described as rip sawing, together with lengthwise cutting represents the first processing step of any solid-wood working. It thus builds the “foundation” of a rational and modern production.
Faults during (width) cutting, such as wood loss, shortage of pieces or excessive stock, continue through the entire subsequent production and have a lasting negative influence on the operating result.
For this reason up-to-date rational cutting is indispensable. Raimann supplies the optimal machine concepts for it. From the small craft workshop up to the completely automated production.
The product range extends from the JrionLine length cutting buzz saw with its almost unlimited possible application when cutting solid wood, laminated wood panels, chipboards, fiberboards (MDF, HDF), insulating materials, plastics to aluminum, via heavy duty ProfiRip multiblade buzz saws with/without automatically adjustable saw blades for optimized width cutting up the complete RaiMech cutting system for customers’ individual demands.
| | |
 |
Scanner systems
LUXSCAN Combi-Scan - the allrounder with Multi-Scan-Technology for the automatic image grabbing and processing of the timber surface
Combi-Scan C200/C400 is a 4 side-scanner, providing a high level of defect detection and / or colors inspection. This system is based on 4 multi-scan cameras for defect detection, upgradable with 2 or 4 colors cameras for color inspection.
Combi-Scan C200 may be integrated in line with the OptiCut due to the intelligent feedsystem VarioSpeed, or with a cross buffer, to feed up to 4 highspeed OptiCut.
Random width board scanning is possible in real time. For handling random width boards, Combi-Scan C200/C400/C600 measures the board width before scanning. This enables fast automatic positioning of top-bottom cameras as well as one side camera in real time.
The benefits of the scanner include decreased labor costs, increased yield, high productivity and consistent throughput. Moreover, you gain flexibility since the cutting / grading rules can be quickly and easily modified.
The scanner can be integrated with existing OptiCut built on or after 1997.
Useful options:
Color detection, using 2 or 4 additional color cameras
Skip detection
Conveyor belts
Random width module
Ink jet printer
| | |
 |
The band resaw series
A class in its own right in construction and workmanship. With the robust and massive style a strong specimen in the sector of the heavy-duty band resaws. With tremendously high feed speeds up to 120 m/min. The comfortable blade tensioning adjustable within the shortest time takes care of an excellent measuring accuracy. An easy and fast measurement setting guarantees high productivity. In addition, you get safety according to strict quality standard, fantastic operating comfort and of course the top service of the world market leader.
What are your demands? It is your choice. Select from an application-oriented product range. From the entry model BKS via the high-performance saw BKL to the power package BKW. Whether as a single saw or as twin resaw for double cut.
Useful accessories such as bevel cut and automatic middle cut attachment expand the use of the reband saw in practically every production.
| | |
|
|
|
|
Mitsubishi Electric Europe B.V. Industrial Automation
|
|
 |
Compact PLC
Full PLC performance in a tiny package | | |
 |
iQ Platform
For maximum return on investment | | |
 |
Modular PLC
Reliable control when you need it most | | |
 |
Modular PLC – process control
Process control you can count on | | |
 |
programmable logic controllers,drive solutions and industrial robots
programmable logic controllers,drive solutions and industrial robots | | |
 |
Remote I/O – MELSEC ST
Tailored for all applications | | |
|
|
|
|
Mitsubishi Heavy Industries Ltd
|
|
 |
Coal Pulverizer
MRS stands for Mitsubishi Rotary Separator.
Coal particles are carried into the separator, where the particles impinge against the rotating vanes.
As a result of the balance of forces within a separating zone, only fine particles enter the inside, whereas the coarse ones are ejected away toward the outside.
The coal particles existing in this separating zone are under the influence of centrifugal (F) and centripetal (R) forces caused by the separator vanes and the air flow respectively. | | |
 |
Combined cycle power plant
In 1984, a combined cycle power plant incorporating the latest turbine technology, supplied by Takasago Machinery Works to Tohoku Electric Power Co.'s Higashi Niigata Power Station, was first put into commercial operation. In terms of thermal efficiency, this accomplishment was epoch-making for the period. The plant saved far greater energy than possible with conventional steam power plants. In July, 1999, a new combined cycle power plant with over 50% thermal efficiency for Tohoku Electric Power Co.'s Higashi Niigata Power Station was completed and confirmed their satisfactory operations. We are proud of a number of accomplishments we have made as the only Japanese manufacturer that perform all the activities from engineering, civil work and construction to commissioning and after-sales servicing with the technologies developed by ourselves. More than 25 combined cycle power plants have also been supplied to over 20 countries in the world, including Asia, the Middle East, Europe and North and South America. | | |
 |
Gas Turbines
Gas Turbines | | |
 |
GEOTHERMAL POWER PLANT
High temperature water or steam under pressure gushes out of 300 to 3,000 meter deep (production) wells. This flow passes through separators (High pressure water/steam separators) and flushers (Low-pressure water/steam separators) as part of the process that separates the steam from the high-temperature water. The clean steam produced at this stage is sent to the turbine and the geothermal heat energy is converted into electric power. This electric power is delivered by means of power transmission lines to power consumers. The used steam that flows from the turbine is cooled in a condenser and converted to warm water. This warm water is further cooled in a cooling tower and is returned for cooling use to the condenser. The high temperature water that was separated out of the flow is sent from the underground recovery well back into earth. | | |
 |
Industrial boiler
Integrated diagnosis
Drive improvement measures construction
Fuel conversion construction
Plant operation optimaizaition construction
Periodic inspection construction
Instrumentation direct distributedcontrol system making construction
Labor saving measures construction
General engineering
Energy saving measures construction
Repair construction
Antipollution measure construction
Performance(capacity and efficiency) improvement construction
Please inquire, and give every business life claiming and requesting estimation about the catalog material. | | |
 |
Photovoltaic Power Generation
Photovoltaic Power Generation | | |
|
|
|
|
Mitsui Seiki Kogyo Co., Ltd.
|
|
 |
5-Axes Control Horizontal Machining Center
This is a built-in type horizontal 5-Axes machining center where C-axis table is placed on the B-axis.
HU40-T and HU50-T have φ360 palette four APC as standard specifications. Other specifications including 400 palette APC models, φ360 fixed table models, automatic workpiece change by 50T taper tool shank are available.
HU63-T has φ600 large fixed table and loading weight is 300 kg, which makes it suitable for 5-axes machining of large workpieces.
By adopting integrated B-axis and C-axis and three-roller bearing, rigidity is improved.
Indexing speed of B-axis/C-axis is unprecedented (Rapid feed /cutting feed rate of 30 min-1 at both B-axis and C-axis). In addition, rapid rising is realized | | |
 |
External Thread Grinder
High-precision, high-efficiency cutting of all kinds of screws including triangular screws, trapezoidal screws, ball screws, screw gauges, and worm is available.
We have the world's No. 1 delivery record of grinders for ball screw processing.
You can input the elements of the workpieces in an interactive way to process virtually all kinds of screws (No programming is necessary).
The temperature of the entire machine is controlled through coolant in sync with the room temperature, so slow temperature change can be tracked to realize high precision process stably.
lubricant in sync with the coolant temperature (room temperature) is circulating at the center of axle of the master screw for table feed to control the temperature to realize high precision process of long screws.
Dressers best suited for the thread grooves of workpieces are available. | | |
 |
Horizontal Maching Center
Box guide ways realize long term high-precision and high rigidity. Hardened box guide ways are attached to the surface which has high straightness and perpendicularity by scraping.
The load to the column sliding section is reduced by air support for smooth high-speed feed despite the sliding method.
Highly rigid Y-shaped integrated three-point support bed is adopted.
Ball screws of all axes are placed in the center of the sliding surface to minimize the position difference. (In the case of standard main axis of HU63A/HU80A) | | |
 |
Jig Borer
A mother machine in a million that has the ultimate space precision.
V-F sliding surfaces of X- and Y-axes are scraped for extremely high straightness and perpendicularity.
Optional ATC device can be attached.
50T specification can be selected as the main axis taper by option (6CN and 7CN). | | |
 |
Jig Grinder
V-F sliding surfaces of X- and Y-axes, spindle head, top and bottom sides of horizontal bridges are scraped for extremely high geometric precision.
Z-axis is NC-controlled and two types of control (Z-axis as cutting feed and Z-axis as chopping cycle) are available.
As for Z-axis chopping cycle, the ball screw drive has realized the high speed of 200 cycles/min (at 25 mm stroke). Even at this speed, the bottom dead center precision is 2µm (300G, 4GDN, 6GCN).
In 3GEN, the linear motor is adopted to the Z-axis (first practical application for machine tools). Z-axis chopping cycle of 400 cycles/min (at 25 mm stroke), which was impossible for traditional models, has been realized to drastically reduce the process time of contouring cutting.
Low thermal expansion casting is adopted for the head material. Error due to heat displacement is extremely small . | | |
 |
Vertical Machining Center
VU50A12,000 min-1 main axis, which is standard equipment, is directly driven and heat displacement is minimal because the motor and the main axis are heat insulated.
X- and Y-axes realize smooth movement by the sliding surfaces of the rolling guide ways and Z-axis sliding surfaces realize rigidity by sliding guide ways.
The surface to which guide ways are attached has high straightness and perpendicularity by scraping. Precision can be maintained for a long time, not to mention the initial precision.
Machine temperature uniformization device that realizes stable processing without effects of ambient temperature is available by option. | | |
|
|
|
|
Moxmec S.r .l
|
|
 |
Robotics ,Automation ,control and assembly
Robotics ,Automation ,control and assembly | | |
 |
Robotics ,Automation ,control and assembly
Robotics ,Automation ,control and assembly | | |
|
|
|
|
MP Filtri SpA
|
|
 |
accessories
Filler and breather plugs – Optical and electrical level indicators – Pressure gauge switches –Mounting brackets – Pressure gauges | | |
 |
In-line filters
In-line medium pressure filters are used as process filters to protect pumps, pressure reducers and hydraulic circuits from contamination as per ISO 4406.
They are available in 2 styles :
LMP 100-250-450-850 filters for mounting in-line
LMP 400-900-950 filters for mounting in-line | | |
 |
Pressure Filters
High pressure filters are used as process filters to protect individual valves or the entire hydraulic circuit from contamination as per ISO 4406. | | |
 |
Return filters
Return filters are used as process and safety filters to protect pumps and hydraulic circuits from contamination as per ISO 4406.
They are available in 4 styles :
SMP semi-immersed filters for mounting to the oil tank with external/internal filter element
MPT semi-immersed filters for mounting to the oil tank with external/internal filter element
MHP/MPI semi-immersed filters for mounting to the oil tank with external/internal filter element
FRI semi-immersed filters for mounting to the oil tank or in-line, available in the single or duplex versions, with external/internal filter element | | |
 |
Structural components
Aluminium bell housings for motors from 0.12 kW to 400 Kw. Aluminium/cast iron/steel couplings – vibration damping rings – supporting feet – aluminium tanks – inspection doors | | |
 |
Suction filters
Flow rates to 850 l/min. Mounting : immersed, external in-line, tank | | |
|
|
|
|
MP Sonder- und Biegemaschinen GmbH
|
|
 |
A75, 89TNCB
Medium tube bending machine for tubes used in exhaust systems and in shipbuilding, boilers and truck parts etc.
| | |
 |
CNC Tube Benders 1
CNC Tube Benders 1
| | |
 |
CNC Tube Benders 2
CNC automatic tube bender makes it easy to produce precision parts. All CNC tube benders have an advanced PC-based control and colourful touch screen interface. We offer flexibility and high production capacity to the manufacturing such as automotive, fashion furniture, fitness equipment, complex hydraulic tubing, and aerospace etc.
| | |
 |
TNC Tube Bender
High performance, small sized tube bender, with easy-to-use controller for easily programming and operation, mostly used in car and furniture industry.
| | |
|
|
|
|
MPK Kemmer GmbH & Co. KG
|
|
 |
cutting tools
Blades, routers, drills, reamers, following steels, counter sinks and graving tools | | |
 |
MLC-Technology
From miniature tool to complete tool
Consumable parts
The miniaturisation of electronic components requires highly precise manufacture of multilayer ceramic circuit boards (MLC) with high packing densities. MPK Special Tools develops miniature tools for MLC technology, such as extremely small carbide dies and bushes, used as part of the crucial hole punching process in the manufacture of MLC circuit boards. All miniature tools are ground on modern CNC machines.
| | |
 |
Special Tools
Special Tools
Top precision through perfection
| | |
|
|
|
|
MS Flange Mfg Co
|
|
 |
flanges
flanges for pipeline industry | | |
|
|
|
|
MSK Covertech Group
|
|
 |
Automatic Unwrapping of Packaged Pallets
MSK does the unwrapping. All those who up to now have had to unpack film-wrapped pallets one after the other in a tedious and awkward way can leave this to MSK Defotech in the future. The latter now carries out this hard job rapidly, reliably and above all fully automatically.
Careful Unwrapping
Requiring just a very small amount of space, the MSK Defotech unpacks up to 60 pallets an hour and passes the film on for recycling. If required, the flexibly mounted winding-up mandrel can even push loads that have become distorted gently back into the correct position. | | |
 |
Conveying Systems for Pallets and Unit Loads
Everything from one single source: Integrated in combination with fully automatic palletising and wrapping systems, MSK conveying systems work safely and reliably as transport and material-flow systems under the control of the MSK software EMSY. Experienced project engineers work out customized total concepts - in this way our customers are saved the time-consuming work of co-ordinating a number of different project teams. | | |
 |
Logistics and Packaging
msk Complete Systems for Logistics and Packaging | | |
 |
MSK Complete Solutions for Packaging and Logistics
MSK wrapping machines can be used as "stand-alone" solutions or integrated in complete packaging lines. This not least because everything comes from a single source - including the conveying systems and the MSK software EMSY, with which the whole system is controlled.
The advantage for our customers: Numerous component-component interfaces - which would otherwise represent potential sources of disruption - are eliminated
| | |
 |
MSK Shrink wrapping - Unique Solutions
Satisfying the unusually high demands placed in respect of securing pallet loads has characterized the engineering of MSK Shrink-Wrap units over the past three decades. On the basis of several MSK patents as well as through close co-operation with leading companies in different sectors, path-setting solutions have been created for the specific requirements of different industries. | | |
 |
MSK Stretch wrapping - Solutions with High Flexibility
Whether hood stretching or wrap stretching, MSK stretch packaging systems offer the greatest flexibility for securing pallet unit loads and large containers.
| | |
|
|
|
|
MTI Mischtechnik Industrieanlagen
|
|
 |
Horizontal Cooling Mixer Type K
high cooling efficiency by 100% utilization of the available cooling surface
large, cooled cleaning lid
simply attachable to existing machines of other brands
Available sizes: K 400 K 2400 K 5000
K 800 K 3300 K 6000
K 1200 K 3500 K 8000
K 1600 K 4250
Receive information about the machine technology and workmanship. This takes you to the Technical details
| | |
 |
MTI Heating-Cooling Mixer Combination
In vertical/horizontal construction for economical preparation of plastics.
high throughput rates with optimal mixing quality
low operating costs
space-saving compact design
optimal cleaning possibilities
Throughput rates of 7-10 batches can be achieved with a MTI Heating-/Cooling Mixer Combination with a total output of up to 6500 kg/h and more. Up to 12 batches/h are possible, if the system is equipped with two cooling mixers.
Available sizes: M 100 / K 400 M 850 / K 3300
M 250 / K 800 M 1000 / K 3500
M 300 / K 800 M 1000 / K 4250
M 300 / K 1200 M 1200 / K 5000
M 350 / K 1200 M 1350 / K 5000
M 400 / K 1600 M 1350 / K 6000
M 500 / K 1600 M 1500 / K 5000
M 600 / K 2400 M 1500 / K 6000
M 750 / K 2400 M 2000 / K 8000
Receive information about the machine technology and workmanship. This takes you to the Technical details
| | |
 |
Vertical High-Speed Mixer Type M
universally usable
available with various drive options
high filling level and flexibility by long mixer shaft and the MTI mixing blades
Available sizes: M 75 M 400 M 1000
M 100 M 500 M 1200
M 250 M 600 M 1350
M 300 M 750 M 1500
M 350 M 850 M 2000
| | |
 |
Vertical Universal Mixer Type M/HK
With a broad range of application in all branches of industry for optimal mixing of powdered, coarse-grained materials, as well as wetting, dispersion and moist granulation.
Available with high-speed chopper and various drive options.
Available sizes:
M 75 HK
M 400 HK
M 2000 HK
M 150 HK
M 600 HK
M 250 HK
|
| |
