|
|
|
IWE Spulen und Handling GmbH
|
|
 |
Handling – Standard- and Specialconstructions
Placing the take-apart process reel on the reel tilter with a jib crand and the exact adjusted lifting device
| | |
 |
Reels according to DIN
Typ EG
High speed wire drawing and annealing reel for use in high speed machines | | |
|
|
|
|
INSYS MICROELECTRONICS GmbH
|
|
 |
Embedded systems
Embedded systems | | |
 |
Modems for 19" Rack
The INSYS 19" rack is designed for application areas in which many data transmission units are to be accomodated at the same place. Due to its modular design, analogue modems for dial-up lines and dedicated lines as well as digital ISDN adapters may be integrated as slot cards according to performance requirements. | | |
|
|
|
|
Institut für Mikrotechnik Mainz
|
|
 |
CNC and EDM Machining
CNC and EDM Machining
Robotics ,Automation ,control and assembly | | |
|
|
|
|
INOTEC GmbH
|
|
 |
Automatic processing
Automatic processing | | |
 |
Inline emulsifiers
Inline emulsifiers | | |
 |
Screw feed emulsifiers
Screw feed emulsifiers | | |
 |
Vacuum emulsifiers
Vacuum emulsifiers | | |
|
|
|
|
Inoex GmbH
|
|
 |
pipe and tube extrusion
pipe and tube extrusion | | |
 |
profile extrusion.
profile extrusion. | | |
|
|
|
|
inocermic GmbH
|
|
 |
Ceramic membranes
Ceramic membranes offer specific advantages in separation techniques:
Chemical, mechanical and thermal stability
Ability of steam sterilization and back flushing
High abrasion resistance
High fluxes
High durability
Bacteria resistance
Possibility of regeneration
Dry storage after cleaning. | | |
|
|
|
|
InnovMetric Software Inc.
|
|
 |
PolyWorks
The Standard Point Cloud Engineering Solution | | |
|
|
|
|
INNOTEC - Netzgeräte GmbH
|
|
 |
DC-UPS power supplies
These types of power supplies are used to hold the DC-output voltage at a stable level during a line failure for a limited time. These power supplies are used in industrial and safety applications. The safety of a system depends mainly on a safe supply. Even the best electronic system will not work if the line fails. Standard power supplies have hold-up times up to 20 ms for short line failures. Depending on the system safe operation times are from seconds | | |
|
|
|
|
Ingrif
|
|
 |
Clam bucket for bulk material handling
- Handling solutions for the metals industry, loose products such as minerals, forestry products, industrial trash, domestic garbage etc.
- Electro-hydraulic or mechanical grabs with 4 or 8 arms, clamshell grabs, suitable for any density, wide range of lifting capacity.
- Underwater grabs. | | |
 |
Coil lifting magnet
Electromagnets, Lifting Magnets
The Lenoir Magnetic Systems lifting magnets handle any kind of hot or cold steel products. Hot items from the production plant, finished steel coils from the warehouse, scrap from the recycling unit etc. By their sturdy design and conception these equipments are perfectly suited to harsh environments | | |
 |
Handling pliers
Lifting tongs for steel products
The Slingofer hoisting tongs handle any kind of hot and cold steel products, be it ingots from the continuous casting or finished steel coils from the warehouse. Other models are dedicated to the handling of equipments in a steel production plant, such as rolls, electrodes, pallets etc. | | |
 |
Hot steel lifting magnet
Electromagnets, Lifting Magnets
The Lenoir Magnetic Systems lifting magnets handle any kind of hot or cold steel products. Hot items from the production plant, finished steel coils from the warehouse, scrap from the recycling unit etc. By their sturdy design and conception these equipments are perfectly suited to harsh environments. | | |
 |
Lifting magnet
Electromagnets, Lifting Magnets
The Lenoir Magnetic Systems lifting magnets handle any kind of hot or cold steel products. Hot items from the production plant, finished steel coils from the warehouse, scrap from the recycling unit etc. By their sturdy design and conception these equipments are perfectly suited to harsh environments | | |
 |
Package lifting clamp
Lifting tongs for steel products
The Slingofer hoisting tongs handle any kind of hot and cold steel products, be it ingots from the continuous casting or finished steel coils from the warehouse. Other models are dedicated to the handling of equipments in a steel production plant, such as rolls, electrodes, pallets etc. | | |
|
|
|
|
Ingersoll Rand Fluid Technologies
|
|
 |
Diaphragm Pumps
Ingersoll Rand / ARO Diaphragm Pumps provide stall-free, ice-free operation. Their patented “Unstallable” unbalanced air valve design avoids stalling issues associated with other pumps. The “Quick-Dump” exhaust valves divert cold exhaust air from ice-prone components, preventing freezing. Backed by a five-year warranty, we have the most reliable pump line on the market today.
Compact Pumps 1/4", 3/8", 1/2" & 3/4" ports
Ideal for OEM and General Industrial applications where peak performance, endurance, and reliability are a must, our compact pumps feature big performance in a small package. With flow rates up to 14.8 GPM (56 LPM) and a large range of material and porting configurations, we have the right pump for your application.
Expert Series Pumps (EXP) 1”, 1½”, 2” & 3” ports
ARO's PROCESS GRADE, Expert Series Diaphragm Pumps feature the best total cost of ownership of any diaphragm pump on the market. A favorite among process professionals, the EXP Pump family provides optimum energy efficiency and downtime solutions. With flow rates up to 275 GPM (1041 LPM) and a large range of material and porting configurations, ARO has the right pump for your application.
Pro Series Pumps 1”, 1½”, 2” & 3” ports
ARO's INDUSTRIAL GRADE, Pro-Series Diaphragm Pumps provide high performance and stall-free reliability. With flow rates up to 237 GPM (897 LPM) and a large range of material and porting configurations, we have the right pump to match your application needs.
Specialty Application Pumps
Utilizing technology identical to other ARO Pumps, these Specialty models will provide the same high level of performance and satisfaction but in a design tailored for your specific application. Specialty pumps include: Drum Packages, Flap Valve pumps, Powder Transfer pumps, High Pressure pumps, Sanitary Transfer pumps, Natural Gas Operated pumps, Centrifugal De-watering pumps, and Fuel Pumps
| | |
 |
piston pumps
ARO piston pumps provide industry proven dependability, economy, and precision control for the delivery of a wide range of flowable materials. The efficient, simple design and construction of ARO piston pumps are the reason they are recognized as one of the most dependable, versatile and accurate on the market. Whether you’re moving a small amount of low viscosity fluid a few feet or a large amount of high viscosity material a longer distance, ARO has a pump to meet your application needs.
Pneumatic Driven Pumps & Packages
Ingersoll Rand / ARO pneumatic piston pumps have been used for decades to increase productivity and minimize the costs associated with transferring, extruding and applying a wide range of fluid and semi-fluid materials. Let our pumps contribute to your bottom line by minimizing downtime and increasing efficiency.
Hydraulic Driven Pumps
ARO hydraulic-powered piston pumps offer the same great quality and reliability as air operated pumps with increased versatility and efficiency. Hydraulic-powered pumps are a great choice when compressed air is limited or when enhanced efficiency and lower noise levels are preferred.
Piston Pump Accessories
Use only genuine ARO accessories and replacement parts to assure compatible pressure rating and longest service life possible. ARO offers a full range of parts and accessories to help you obtain the best results in your operation.
Piston Pump Feature Tour
Whether you’re moving a small amount of low viscosity fluid a few feet or a large amount of high viscosity material a longer distance, ARO has a pump to meet your application needs. See what differentiates our pumps from others on the market by taking the Piston Pump Tour.
| | |
|
|
|
|
Ingersoll Machine Tools Inc.
|
|
 |
machine tool solutions
introducing the next generation of machine tool solutions for the die & mold industry. | | |
|
|
|
|
Inge AG
|
|
 |
dizzer220.
dizzer220. | | |
|
|
|
|
Ing. Gerhardt Höfer & Co. Maschinenproduktions-gesellschaft m.b.H
|
|
 |
Hydraulic press
Hydraulic press EXPERT
The expert class offers you decades of high working safety. Pressure is well distributed by both large and small workpieces ensuring maximum profitability. | | |
 |
Solid wood slate press MHP with edge gluer
We designed this machine, taking into account the trend for solid wood usage. It can be used for both hard and soft wood. A newly developed bonding technique ensures high profitability. | | |
 |
VENEER- and PANELSAW "FSP - Automatic"
The newly developed veneer and panel saw FSP-Automatic, has been adapted to suit the requirements of the present-day manufacturing processes. Because of its future orientated total concept, featuring
- central control of all machine functions
- double linear guide systems
- synthetic safety cover for the cutting area
- automatic cutting procedure sequence
the rationalization potential can be expanded.
For the cutting of all tiypes of veneer, wood and chipboards, panels with synthetic or veneered surface, plexiglass, non-ferrous metals and various panels used in the construction branch.
For the veneer and panel saw FSP-A there is a number of additional equipment making it possible to equip your machine to suit a varies of applications. Thanks to the modular construction, components can be added later.
| | |
 |
VENEER- and PANELSAW "FSP"
Reliable veneer- and panel saw with pneumatic pressure beam and massive base construction. The finishing cutter ensures high cutting quality which is of extreme importance when cutting hard and brittle veneers or thick veneers. | | |
|
|
|
|
INTERLUBE SYSTEMS LTD
|
|
 |
SLX Range
ELECTRICALLY OPERATED-SINGLE LINE SYSTEMS
The SLX Product Range - suitable for medium to large machine tools, fixed plant in quarries, steel works, coal mines, cement works and large cranes where a choice of lubricant from SAE 90 oil to NLGI grade 2 grease is required. | | |
|
|
|
|
Interspiro AB
|
|
 |
FILTER PROGRAM
FILTER PROGRAM – Clean air in every situation. Hazardous situations, harmful particles, high concentrations, long duration operations. In these situations, there is no room for compromise when it comes to respiratory protection equipment. The secure and comfortable fitting of the mask and the safe performance of the filter must be perfect for the absorption and removal of toxic substances from breathable air.
| | |
 |
Respiratory masks
Respiratory masks | | |
|
|
|
|
ITT Engineered Valves
|
|
 |
Ball valve
Cam-Tite ball valves are engineered to provide the very best performance for demanding hazardous and corrosive applications. Designed to overcome such inherent valve problems as high operating torque and stem leakage, Cam-Tite ball valves feature a unique, non-spherical ball with a bevel at the lip of the port. This configuration minimizes pressure on the seating areas, thus reducing cold flow and prolonging seat life. | | |
 |
Diaphragm valve
Dia-Flo diaphragm valves are the workhorses and foundation of Engineered Valves' product offerings. Durable, dependable Dia-Flo diaphragm valves are engineered for tough work environments in the chemical processing, water treatment, pollution control, food and beverage, mining, pharmaceutical, pulp and paper, and power generation industries. ITT is a leader in valve technology and the foremost innovator of diaphragm type valves. The diaphragm valve is dependable, cost effective and versatile and is installed across the world in virtually every type of process plant. | | |
|
|
|
|
ITL INDUSTRIES LTD.
|
|
 |
| | |
 |
horizintal bandsaw machines
twin column construction horizintal bandsaw machines | | |
 |
tube staightening machine
staightening machine | | |
 |
sawing machine
circular sawing machine | | |
|
|
|
|
ITEC GmbH
|
|
 |
Packing systems
Attec Danmark A/S and ITEC Germany offer solutions for packing fresh products into film or plastic bags.
The packing ensures that the durability demands and a correct hygiene standard are observed during storage and transportation.
The arrangement and efficiency of the working places in the packing area is optimised by a correct ergonomic composition.
| | |
 |
Sausage production
Within the sausage production there are some processes, which today are possible to automate. The automation increases the yield and the quality of the final product. | | |
|
|
|
|
Italpresse Engineering SpA
|
|
 |
CABINET ASSEMBLING CLAMPS AND PRESSES
A full range of clamping presses for assembling furniture parts, drawers, writing desks and frames in general.
Available in mechanical, hydraulic and mixed versions.
Manual loading, or automatic with a conveyor belt.
High manufacturing accuracy is guaranteed by superior-quality mechanical components and numerous NC machining processes.
Configurable with various options to personalise the process according to the type of assembly.
| | |
 |
COLD PRESSES - STANDARD MODELS
| | |
 |
EMBOSSING AND MOLDING PRESSES
vast range of heavy hot/cold hydraulic presses for forming and molding by means of steel or aluminium dies/molds.
They are used for numerous applications with various types of material, including solid wood, plywood, MDF, HDF, hardboard, plastic, aluminium, light alloys and composite materials.
These presses by ITALPRESSE are much appreciated in the car industry, where they are used for making briarwood and aluminium inserts, insulation panels for engine and passenger compartments, as well as decks for vans and lorries. Please take a look at the section of this catalogue named ‘AUTOMOTIVE ‘
Special technology has been developed for producing shaped door-skins made of thin MDF (GL/HD).
Available in various sizes and with various powers/pressures, with closing from above or below, and electric or thermal oil heating system.
They can be configured at will thanks to a large number of optional devices that can be used to adapt the press to your personal requirements.
Control of the pressing functions and the cutting/deformation depths is extremely accurate, with computerized interfaces and colour graphics for plotting and monitoring particular pressure or temperature curves.
High manufacturing accuracy is guaranteed by superior quality mechanical components and numerous NC machining processes.
| | |
 |
FRAME CLAMPS
Frame clamping presses by Italpresse are indispensable for assembling door and window frames, solid doors, French windows, indoor and outdoor shutters and numerous other types of frames.
Italpresse’s vast range of clamping presses meet the production requirements of all categories of customers, from small businesses to large manufacturers.
The basic configuration of each clamping press can be completed by a whole series of optionals. All the machines come in numerous sizes.
Series production using these machines is a guarantee of superior quality and affordable prices.
High manufacturing accuracy is guaranteed by superior-quality mechanical components and numerous NC machining processes.
| | |
 |
HOT PRESSES - STANDARD MODELS
A vast range of hot presses for all kinds of application: all types of glueing, forming, skimming, bending, drawing and so on.
Hot presses by ITALPRESSE are used in many different sectors, including the manufacture of furniture, door and window frames, parquet flooring, doors and wooden items in general, the plastics industry, motor vehicles and aircraft, insulated panels, buildings and so on.
The presses come in various sizes and powers/pressures, with closing from above or below.
They can be configured at will thanks to a large number of optional devices that can be used to adapt the press to your personal requirements.
High manufacturing accuracy is guaranteed by superior-quality mechanical components and numerous NC machining processes.
High quality and competitive prices are guaranteed by ITALPRESSE’s mass production
| | |
 |
MEMBRANE PRESSES
THE STATE OF THE ART IN MEMBRANE PRESSES: ITALPRESSE’S RANGE
Thanks to lengthy experience in designing and developing membrane presses for the wood industry, ITALPRESSE now turns out a huge range of membrane presses with specific features designed to meet all possible production requirements.
Membrane presses are widely used for 3D coating shaped wooden panels with thermoplastic sheeting, sliced veneers, laminated plastic sheets and transfer foils.
Typical products are furniture doors, desk and table tops, shelves and three-dimensional rustication panels for doors of all sizes. New applications are added all the time thanks to the users’ ideas and imagination.
The ongoing quest for new applications is supported by the manufacturers of the materials used - mainly glues and thermoplastic sheets - who continually market new technologies and innovative designs.
In such a dynamic situation, membrane press manufacturers should never feel complacent - technological solutions that appear to be ideal today may well be obsolete by tomorrow.
ITALPRESSE’s philosophy has always been to develop different products for different requirements, identifying the advantages of each technology with reference to each type of application.
This is why ITALPRESSE’s range of machines includes FLUID-OPERATED MEMBRANE PRESSES, AIR-OPERATED MEMBRANE PRESSES and AIR-OPERATED MEMBRANELESS PRESSES.
The range of loading systems includes presses for HAND, TRAY MOTORIZED BELT LOADING. High output systems are also available, such as the MULTI-TRAY CAROUSEL, with return below or at the side of the press.
The already long list of basic equipment can be completed with optional devices, such as SHEET UNWINDERS/TRIMMERS, tray PARTIALISERS and KITS FOR ECOLOGICAL MATERIALS.
A special mention goes to the exclusive PSS, a revolutionary panel-supporting system that entirely eliminates the need for templates or panels for coating with thermoplastic sheets. Ease of use, efficiency and reliability are the strengths of this system.
| | |
|
|
|
|
I.S.V.E.
|
|
 |
Four shaft shredder
shredders, combined systems and granulator grinders customised to meet customer requirements.
Its plants have been widespread for years in all European and in many extraeuropean countries.
ISVE products come in 3 lines:
“Tritotutto” industrial shredders line are machines specifically made to shred both urban and industrial wastes such as plastic, paper, cardboard, wood and packagings, fruit shells, fruit stones hide scraps and leather, barks, cans, tyres, waste wood, etc.
Models range from the smallest and simple one (5,5 KW) to the model with a larger loading inlet and higher performance, with the installed power capacity up to 30 KW.
Please visit the “shredding demo videos” area of our website, to see this versatility.
“Combi” series: shredder with an in-line granulator, capable of producing final chips ranging between 12 and 4 mm suitable for shredding bulky plastic material, paper documents and wood.
Industrial single-shaft shredders with hydraulic pusher-drawer, complementary systems for double and four shafts shredders.
These machines complete the range of I.S.V.E precrushing system. Said machines are particularly suitable for shredding high specific weight elements such as plastic blocks, big pieces of wood, pallets, paper documents, extruded polymer pipes, etc | | |
 |
One shaft shredder
"M" SERIES SHREDDERS
Alongside the traditional 4-shafts equipped shredders, I.S.V.E. proposes a series of single-shaft equipped shredders with pusher-drawer.
These machines are purposely studied to shred thick materials and highly resistant to cut such as plastic blocks and sheets, various types of timber, paper, extruded polymer pipes, etc.
Operation drawings:
A pusher-drawer with hydraulic drive pushes the material towards a tools-holder roller which carries out the first breaking and thanks to its rotation and to the COUNTER-BLADE action makes a first breaking and the shredding of the product.
The product passes through a drilled screen, which allows establishing the final sizes of the material. | | |
 |
Spraying impregnation machine for wood protection
SPRAY MATIC series Impregnation-Spraying Machine
(SPRAY MATIC 250/100, 300/300, 300/400, 300/600)
Spraying machine made for applying solvent or water based impregnating products, on square, rectangular, circular or shaped wooden profiles or beams.
The items are at first impregnated with the atomised product and then brushed to remove any excess primer. The result is uniform treatment and colouring of all the surfaces of the profile, without smears or stains. | | |
 |
Vacuum impregnation machine for wood protection
Vacuum-Pressure Impregnation Plants mod. IMP-VAC
(IMP-VAC 4- 6- 7- 8- 10 -12)
It is composed by two autoclaves laid one upon the other or by a single autoclave subdevided in two chambers.
The two tanks contain respectively the preservative and the wood to treat. | | |
|
|
|
|
Iseli & Co. AG Maschinenfabrik
|
|
 |
Leveling
Products Leveling | | |
 |
Sharpening
Products Sharpening | | |
 |
Side-grinding
Products Side-grinding | | |
 |
Stellite-tipping
Products Stellite-tipping | | |
 |
Swaging
Products Swaging | | |
|
|
|
|
Iscar Ltd.
|
|
 |
cylindrical drills
cylindrical drills | | |
 |
turning
turning | | |
|
|
|
|
IPTE Germany
|
|
 |
BAT Dispensing Cell
Multiple Nozzle Applications
G-Command Based Dispense Profiles
High-Speed Precision In-Line Dispensing System
Modular Cell Structure for Easy Integration into PCB or Final Assembly Lines
PCB or Carrier Transport
Modular Dispensing System
High Process Reliability With Auto Weighin, Calibration and Needle Check
Wide Variety of Applications | | |
 |
SpeedMounter²
Flexible and Modular Odd Form Component Placer
In-Line and Off-line Capable
For ‘Standard’ Odd Form Components and Special Applications
Maximum Efficiency and Productivity
Small Footprint
Rotational Head for Fast and Efficient Placement
Intuitive Operator Interface | | |
 |
SpeedRouter
Depaneling system
High Speed, Low Stress, Separation Process
Linear Motor Technology
Robust Cast Aluminum and Granite Construction
Broken Bit Detection with Automatic Tool Change
Capable of Routing and/or Sawing
In- and Off-Line | | |
|
|
|
|
IPSEN INTERNATIONAL GmbH
|
|
 |
Furnace Technology
The atmospheric chamber furnaces built by Ipsen have a modular design an are made of standardised assemblies | | |
|
|
|
|
IPS, Innova Packaging Systems
|
|
 |
Plastic Boxes
HyBox
hygienic multi-trip packaging
The HyBox is the first hygienic mult-trip packaging that delivers substantional performances:
hygienic packaging
multi-trip
users friendliness
transport optimisation
| | |
|
|
|
|
I-Pac Technologies N.V.
|
|
 |
sippr
sippr | | |
|
|
|
|
INTERTRADE Kürbis & Müller oHG
|
|
 |
Hydraulic cylinders
Hydraulic cylinders | | |
 |
Hydraulic lifting cylinders
Hydraulic lifting cylinders | | |
 |
Hydraulic pumps
Hydraulic pumps | | |
 |
Shop presses
Shop presses | | |
|
|
|
|
INDUSTRIAS PUIGJANER S.A
|
|
 |
| | |
 |
Edge trimming machine
These trim, mark, bead and seam round and polygon shaped parts, formed either by first operation pressing or spun processes. | | |
 |
Tube necking machine
These are capable of hot closing tank-ends and pressure tanks up to 350 mm in diameter.
Avialable as either hydraulic sensitive, automatic or CNC compatible. | | |
|
|
|
|
Industrias Hidráulicas, S.A
|
|
 |
Scrap Baling Presses
Scrap Baling Presses
| | |
 |
Scrap metal baling press / guillotine shears
Scrap metal baling press / guillotine shears
| | |
|
|
|
|
Indumasch Eberhard Sting GmbH & Co. KG
|
|
 |
Bevel edge forming.
Bevel edge forming. | | |
 |
Profile bending technology
Profile bending technology | | |
 |
Punching machines-nibblers
Punching machines-nibblers | | |
 |
Universal bending technology
Universal bending technology – flexible and versatile, for a range of applications | | |
|
|
|
|
Ilapak Verpackungsmaschinen GmbH
|
|
 |
vegatronic
vegatronic packaging technology | | |
|
|
|
|
II-VI Deutschland GmbH
|
|
 |
CO2 Laser Optics
Welcome to II-VI Infrared, the CO2 laser optics and infrared (IR) optics business unit of II-VI Incorporated. This site features information on our complete line of industry-leading precision optics products, including:
OEM-quality replacement CO2 laser optics and nozzles
The MP-5® ultra-low absorption focusing lens
The Variable Radius Mirror (VRM) -- also known as a deformable mirror or adaptive mirror
Scanning laser system optics for low-power applications such as marking, engraving, and via hole drilling
Information on proper cleaning and handling of CO2 laser optics
Tutorials on choosing a focusing lens, polarization, and additional topics
... and more | | |
|
|
|
|
igus® GmbH
|
|
 |
Cable drag chains
Cable drag chains | | |
 |
Control lines
Control lines | | |
 |
Spherical plain bearings.
Spherical plain bearings. | | |
|
|
|
|
ifm electronic gmbh
|
|
 |
convenient optical distance measurement
convenient optical distance measurement | | |
 |
efector gwr-the microwave sensor
efector gwr-the microwave sensor | | |
 |
m18 photoelectric sensors
m18 photoelectric sensors | | |
|
|
|
|
|
|
 |
eddy current separator.
eddy current separator. | | |
 |
heavy duty screens
heavy duty screens | | |
 |
vibrating feeders
vibrating feeders with electromagnetic drives | | |
|
|
|
|
IDEAL−Werk C. + E. Jungeblodt GmbH + Co. KG
|
|
 |
Coil Welding Machine
With an IDEAL Coil Welding Machine you can weld steel and non-ferrous metal coils in a most economical way.
The IDEAL Coil Welder makes the continuous operation of manufacturing lines for e.g. tube welding-, profile-, rolling-, plating-, and annealing lines possible.
| | |
|
|
|
|
ndustrial Ceramic Products Inc
|
|
 |
Ceramic gating components
foundry ceramic gating components | | |
 |
Investment casting
investment casting | | |
|
|
|
|
ibW Rührwerkstechnik GmbH
|
|
 |
TurboRexDIN-mixers
IbW TurboRexDIN-mixers cover the full agitator spectrum, ranging from highly fluid to paste-like media. These include high and low-speed agitator systems for pressureless or pressurized and in vaceo usage. Mounting takes place directly at the motor flange on the sub-construction provided by the customer. | | |
|
|
|
|
IBEDA Sicherheitsgeräte und Gastechnik GmbH & Co. KG
|
|
 |
Gas manifolds and tapping points
Mobile gas manifolds and tapping points
Fixed gas manifolds and tapping points
Auto change gas manifolds
| | |
 |
Gas Safety devices and Hose Couplings
Gas Safety devices and Hose Couplings | | |
|
|
|
|
IBE Software GmbH
|
|
 |
cncCUT as an integrated control panel solution
The flexibility of cncCUT fulfills every essential sheet metal working requirement a user might have. The software program can be installed on a standard commercially available PC, or directly on your cutting machine for viewing on its control panel. cncCUT is exceptionally user-friendly and exels in its functionality and ease of operation.
IBE Software is already working in partnership with reputable control panel manufacturers, who fully integrate the software with their machines. The control panel version can be used in different ways. The basic desktop version of cncCUT can be used on a control panel, or a touch-screen, as required. If you use a control panel with soft-keys, you can operate cncCUT without the need for a mouse.
Some examples of cncCUT's integration | | |
 |
The Concept
The goal: acceleration of the sheet metal industry's workflow from entry to production! Data recorded once in the construction phase (CAD; computer aided design) and administration phase (PPS; production planning and controlling systems) shall be made immediately available for the job preparation schedule. How can this goal be achieved? Our two standard products AV32 and ncCAD32, customisable for your company, bring the goal within reach.
AV32 and ncCAD32 form the integrating link between administration / construction and production in the sheet metal forming sector. This applies to NC (numerically controlled) programming as well as to the organisation of the job preparation schedule. The increase in the efficiencies of both factors gives the results you hope for. Statistically, the organisational aspect makes up at least 50 percent of the job compared to the NC-programming. Due to immediate availability of data (parts data, article data, appointments and CAD data) a crucial time-wasting intermediate step can be omitted. Intelligent, individual interfaces communicate with the construction and the administration departments and pass the appropriate production data back. | | |
|
|
|
|
Ibarmia S.A
|
|
 |
Column drills.
Column drills. | | |
 |
Stand drills
Stand drills | | |
|
|
|
|
IBAK Helmut Hunger GmbH
|
|
 |
IBAK 3.5
IBAK 3.5 | | |
 |
Products overview
IBAK Well and borehole TV cameras are pressure-watertight axial or pan and rotate cameras. Various cable winches for cable lengths of up to 1000 m are available for different inspection depths. If longer cables are required, special solutions can be implemented with special winch models. With the larger cable winches such as KW 500 and KW 1000, the camera is positioned in the well by means of a 4-quadrant control system. To assure optimum picture quality, equalising amplifiers are used to process the video signal. Horizontal wells can also be inspected with IBAK Well TV Systems and special 4-wheel-drive camera tractors. The IBAK analysis software and an extensive range of accessories complete this product line. The systems are semitransportable or can be permanently installed in a vehicle. | | |
|
|
|
|
ILMVAC GmbH
|
|
 |
scroll pump
scroll pump | | |
 |
vac concentrators
vac concentrators. | | |
|
|
|
|
IMA Industria Macchine Automatiche S.p.A.
|
|
 |
double chamber with string folded tag and aluminium staple
double chamber with string folded tag and aluminium staple. | | |
 |
labelling machine for ampoules and vials
Medical Packaging technology | | |
|
|
|
|
Induktor GmbH
|
|
 |
Toroidal transformer
Toroidal transformer with or w/o encapsulation | | |
|
|
|
|
INDEX-Werke GmbH & Co KG Hahn & Tessky
|
|
 |
CNC Vertical Lathe.
CNC Vertical Lathe. | | |
 |
CNCTurning milling center
CNC Turning milling center | | |
 |
g160
The superior solution for the production of small or large batch sizes in a large variety up to 800 mm turning length | | |
 |
v160d
Double spindle machine with two identically
designed pickup spindles produces two
identical workpieces in a single operation. | | |
|
|
|
|
indeva group
|
|
 |
Industrial Manipulators Liftronic series
All the advantages of an INDEVA compared to traditional manipulators
The Liftronic series manipulators are evolved industrial manipulators belonging to the INDEVA class (Intelligent Device for Handling).
The INDEVA (or IAD – Intelligent Assist Devices) are electronic zero gravity balancers and represent a new ergonomic solution in material handling, solving today’s urgent neeed for increased productivity and safety.
Models are available from 80 to 320 kg capacity, including the end effector. It can be applied to different supports: column with Orbit_Arm®, ceiling, overhead rails and Liftruck®.
Thanks to our modular tooling concept “MODULO” and microprocessor logic, we can design and manufacture tool heads to suit the exact requirements of our customers in all industrial fields. | | |
|
|
|
|
IMOS AG Interior Design Software
|
|
 |
Pro.Line. Manufacturing Customizations in Mass Production
for industry: It's a question of bulk production - inexpensive, fast, simple! But where standardization ceases, costs don't have to explode: imos is the expert for customized solutions!
imos can easily be integrated into every production structure, meets individual customer demands and specific spatial requirements - fast, flexible, cost-efficient. The imos components can be integrated selectively into the manufacturing process where processes concipated for mass production meet their limits. Beginning with the 3D construction and presentation, over calculation and concluding with the CNC machine interfacing: imos components warrant for continuous industry solutions | | |
|
|
|
|
imoberdorf ag
|
|
 |
imo-compact
Main Application Areas
Remachining small parts:
• Watch industry: Watch plates, shells, strap elements, etc.
• Electronics industry: Components of ABS, airbag, fuel injection, pressure die-castings, etc.
• Telecommunications: Connector parts such as pins, housings, sleeves, bayonet closures, etc.
• Various industries: Turning parts, valves, spectacle hinges, refrigeration compressor components, etc.
Advantages
• High quality, reliability and very long service life
• Good accessibility for setting up and for changing tools
• Hermetically sealed machine cabin with efficient chip flushing system
• Machining units of modular design
• Flexible, versatile, convertible and upgradeable
Benefits
• High productivity thanks to short maintenance, set up and non-productive times
• Low operating and maintenance costs due to the machine’s reliability and long service life
• Long-term investment security thanks to the ability to adapt to new parts ranges
| | |
 |
imo-trust
Main Application Areas
Remachining small parts:
• Watch industry: Winding buttons, watch plates, journal bearings, etc.
• Electronics industry: Connector parts, such as housings, plug sleeves, contact pins, etc.
• Telecommunications: Input and output connectors, antenna connectors, etc.
• Various industries: Turning parts, spectacle hinges, etc.
Advantages
• Simple machine concept that has proven itself over decades
• High quality, reliability and very long service life
• Machining units of modular design
• Easy to operate and maintain
• Flexible, versatile, convertible and upgradeable
Benefits
• High productivity thanks to short maintenance, setting-up and non-productive times
• Low operating and maintenance costs due to the machine’s high quality, reliability and long service life
• Long-term investment security thanks to the ability to adapt to new parts ranges
| | |
|
|
|
|
IMCAR s.r.l.
|
|
 |
Sheet metal forming machines
Sheet metal forming machines | | |
|
|
|
|
Imao Corporation
|
|
 |
Easy clamping
One touch clamps | | |
|
|
|
|
IMAL s.r.l.
|
|
 |
GLUE BLENDERS IPV
GLUE BLENDERS IPV
| | |
 |
STORAGE BIN SILOBIN
Particle dosing machines | | |
|
|
|
|
Imaforni Int´l SpA
|
|
 |
Bakery machines
Bakery machines | | |
 |
Baking ovens
Baking ovens | | |
|
|
|
|
IMAC Italia s.r.l
|
|
 |
Angle notcher
- Oleo dynamic working through two cylinders to guarantee a constant and smooth notching.
- A large and rigid worktable with directional triple functions engraved brass scales for measuring the various types of notches.
- Squaring guides equipped with reference holes every 15°.
- Engraved protractor.
- A head configuration allowing cuts longer than the blade length.
| | |
 |
Chamfering machine
On the variable angle model (CBV18) it's possible to vary the grading (from 22° to 45°) of the angle automatically without replacing the rollers. Moreover it's not necessary to overturn the machine to carry out the lower bevel.
| | |
 |
CNC combined plasma cutting and punching machine
The option of the Plasma cutting of Imac production offers the flexibility that the user needs to get complex geometric figures and irregular shapes. | | |
 |
Manual punching machine
The manual punching machine HP M 500 is suitable for those customers who have to produce prototypes and doesn't need any other equipment.
The big advantage of this machine, besides being at 30, 40 or 50 tonnes, is that of fitting different attacks such as Trumpf®, Rainer® or Fimm® type.
The first one is well-known for its exactness while the second one exploits the wide matrix that on the HP M500 can reach the 180mm. With these features the customer can make also holes of important dimensions with a single punch.
| | |
 |
Multi notcher
Notching station:
- The Oleo dynamic working through 2 cylinders and 5 guides allows an absolute rigidity of the notching group and guarantees the chance of notching without removing the punch in the punching station.
| | |
 |
Rapid CNC punching machine
All the numerically controlled punching machines of different dimensions (1000x1250; 1000x2000; 1250x2000; 1500x2000 mm and other dimensions under request) can be indistinctly equipped of:
- All types of Multitool (see the section tools)
- software on the machine or fitted on the office PC
- Index system
There are three categories of Imac CNC punching machines and they mainly differ for the motorization and hydraulic group. | | |
|
|
|
|
Imac Oldenzaal BV
|
|
 |
batch controller
batch controller | | |
 |
The ultimate way of sensing moisture in mixes
The ultimate way of sensing moisture in mixes | | |
|
|
|
|
IMA Klessmann GmbH
|
|
 |
BIMA 200 - milling and boring machine
BIMA 200 - milling and boring machine - the new efficient processing centre for flexible producion of idividual small batch- and single-part production of furniture components for interior fittings. The BIMA 200 emphasizes the 30 years' technological know-how of IMA in constructing trendsetting stationary processing centres.
The new BIMA 200
combines one high-capacity main spindle
with an elaborately constructed tool changing device,
offers high acceleration c-value and a high residual speed in all axis
combining these features to an intelligent machine concept with minimal processing times with a maximum of operating efficiency.
| | |
 |
ICOS QUICK STEP
Windows-based IMA-control ICOS QUICK STEP - user -friendly user interface and fully automatic drilling and guideway optimisation.
The control is a high-performance, PC-based control system with integrated SPS. Operation is accomplished from a separate operator terminal via keyboard and mouse. In addition to the hardware components of the PC-system the ICOS QUICK STEP is also equipped with the newly-developed customised user interface, as well as a drilling and guideway optimisation, incl. collision control.
The industrial PC with 17'' TFT-screen offers almost unlimited memory capacity for individual panel programs.
The user interface is equipped with a simple, dialog-based panel programming and with clear tool data administration. Reporting system for operator and error messages is standard configuration, as well as data communication via fieldbus system, uninteruptable current supply (USV) and preparation for teleservice.
The drilling/guideway optimisation is a path/time optimisation of the supports and the processing units. The processing steps can be represented during programming.
| | |
 |
Solutions - handling, transport and storage technology
Fascination handling<: IMA-MEINERT is consistently developing new concepts of latest production logistics for the woodworking and furniture industry. IMA-MEINERT plants - convincing by productivity, effieciency and quality for more than 40 years.
IMA-MEINERT know-how guarantees intelligently working production lines and logical linking by optimised material flow control and warehouse management. This applies for individual solutions as well as for linking of complete production systems.
In cooperation with the customer IMA-MEINERT engineers develop customised solutions - from the analysis of the requirements to the conception stage until the maximum of effieciency of the whole production process is achieved.
| | |
 |
Throughfeed Technique
Throughfeed Technique | | |
|
|
|
|
IAI Industrieroboter GmbH
|
|
 |
ICS(P)A2 Two-Axes Integrated Combination System
ICS(P)A2 Two-Axes Integrated Combination System
The most commonly selected IS(P)A Series configurations are offered as completed double axis systems ("P": precision design).
All cartesian ICS(P)A Series systems are lightweight, compact, and highly stable platforms.
A wide variety of unit configurations are available to suit each user`s particular needs.
Each cartesian ICS(P)A System comes with all brackets and cabling and is ready to be assembled and introduced into producton setting. This allows the user to increase productivity immediately.
X-Y-Rotary systems are also offered.
Maximum stroke x-/y-axis: 2.500 mm / 1.200 mm (Gantry Type)
Maximum Payload y-axis: 40 kg
With self-standing hose or cable track assembly
Brake and limit switch option for all linear actuators
Dedicated X and Y axes are used for combination.
All other IA linear acutuators can also be combinated.
Ask for dust shield or cleanroom systems as well as the combinations other than IS(P)A Series actuators.
Each Combination System is delivered with an appropriate multi-axis X-SEL controller.
| | |
 |
ICS(P)A3 Three-Axes Integrated Combination System
ICS(P)A3 Three-Axes Integrated Combination System
The most commonly selected IS(P)A Series configurations are offered as completed triple axis systems ("P": precision design).
All cartesian ICS(P)A Series systems are lightweight, compact, and highly stable platforms.
A wide variety of unit configurations are available to suit each user`s particular needs.
Each cartesian ICS(P)A System comes with all brackets and cabling and is ready to be assembled and introduced into producton setting. This allows the user to increase productivity immediately.
4-Axis(XYZRotary) systems are also offered.
Maximum stroke x-/y-axis: 2.500 mm / 1.200 mm (Gantry Type)
Maximum stroke z-Axis: 600 mm
Maximum Payload z-/y-axis: 19 kg / 19 kg
With self-standing hose or cable track assembly
Brake and limit switch option for all linear actuators
Dedicated X, Y and Z axes are used for combination.
All other IA linear acutuators can also be combinated.
Ask for dust shield or cleanroom systems as well as the combinations other than IS(P)A Series actuators.
Each Combination System | | |
 |
NS Series (Rotating Nut Linear Actuator)
NS Series (Rotating Nut Linear Actuator)
The NS Rotating Nut Linear Actuator is a truly innovative single-axis robot using a built-in nut rotation (hollow) motor as its drive source. The NS series also includes double-slider types like IAI's linear motor series LSA. | | |
|
|
|
|
|
