|
|
|
DYROS ApS
|
|
 |
Burner Management Systems, Automatic Burner Controls
BCS 300 | | |
 |
Connector sleeves.
Dyros connector sleeves for repair of thread pipes are turned of brass or steel in sizes of 3/8” bis 2”.
All connector sleeves are supplied with stainless steel compression ring, stainless steel slide ring, and mould seals of EPDM rubber, which can endure temperatures
from -40 degr. to +140 degr. C. | | |
 |
Hose clamps.
Dyros hose clamps of electroplated steel or stainless steel are available in sizes
from 9 mm to 35 mm | | |
 |
Hose connector fittings
Dyros adapter pieces – hose connector fittings are all turned of solid brass with mould seals of nitril-rubber, suited for both water and oil.
Dyros adapter pieces are supplied chromium – plated.
Dyros hose connector fittings are supplied both of raw brass and nickel-plated. | | |
 |
Quick Connectors
Dyros quick connectors series 6 – 10 – 30 – 40 – 80 – 90 are specially developed for cooling fluids on plastic moulding tools and are to be found in all places, where small dimensions, trustworthiness and safety are appreciated. | | |
 |
Water hose connectors
Dyros water hose connectors series 100 – 2000 – 3000 with respectively 11 – 15 – 20 mm passing capacity are one of the most popular on the market, and are widely used in many places, f.inst. in plumbing installations, on high pressure scrubbers, on laundry machines, on garden hoses, in industry and by private consumers.
All connectors are turned of massive brass and chromium – plated.
Locking balls and – springs are of stainless steel, O-rings and thread packing of
Nitril-rubber, which is especially suited for water from -30 dgr. to +100 degr. C. | | |
|
|
|
|
DOMO Caproleuna GmbH
|
|
 |
floor coverings
DOMO® - one of the largest manufacturers of floor coverings - bases growth and innovation on their own production of high-quality chemicals and plastic intermediates. | | |
|
|
|
|
DONAU Werkzeugmaschinen GmbH & Co KG
|
|
 |
cnc rapid radial drilling machine
cnc rapid radial drilling machine | | |
 |
DANUFLEX® 135 and 145
Quality and an excellent Price / Performance Ratio
With the DANUFLEX series of machines, reflecting the modern state of art in engineering, DONAU offers a successful drilling concept that has been proven worldwide. Particularly in machining single pieces and small batches DONAU earned a name. Some of the problems encountered in this field , such as marking out, centre punching and time-consuming centering on milling machines, can now be done seperatly, thanks to an intelligent position indicator offered by DONAU as an optional accessory.
DONAU machines are versatile and convince users by an unmatched cost – performance ratio. Every application is a particular challenge for the professionals at DONAU.
Quite a number of practice-oriented solutions for problems were brought forward in dialogue with customers and users, and matured into series production.
DANUFLEX Advantages . Attractive cost-performance ratio . Drill moving to the machining position in working cycle. Unrestricted accessibility from all sides. Also suitable for series work | | |
 |
DANUMERIC®...
The DANUMERIC® ... Setting standards and saving costs
Designed to be used for one-off and small series production, the DANUMERIC® is setting standards of drilling technology and economical production.
Savings of up to 75 % of costly set-up and non-productive times make the DANUMERIC an investment that’s paying itself. For drilling work there is hardly another solution at hand that would be more intelligent and flexible than the CNC-controlled Rapid Radial Drill of DONAU. With a DANUMERIC®, marking out, centre punching and time-consuming aligning of workpieces are history. The combined advantages of a rapid radial drilling machine and an efficient CNC control deliver cost savings and are helpful in avoiding manual errors. | | |
 |
DANUPORT®
The DANUPORT® from DONAU presents a combined technology. It delivers the advantages of a travelling column & pendular machining center and a CNC controlled rapid radial drilling machine.
Large voluminous workpieces are welcome. With the 5th CNC axes (travelling column) the possibilities of the DANUPORT® are multiple. With a X-axis travel of up to 20,000 mm / 65 ft machining large-surface workpieces gets possible. As an option, this machine can be equipped with a tool magazine, reducing off-times especially in a pendular situation.
DANUPORT® Advantages
No marking out or center punching
5 CNC axes
Pendular machining possible
No aligning of workpieces
Also suitable for large series production
Simple programming, no prior CNC knowledge required
Unrestricted manual operation | | |
 |
DONAU® alpha
Drilling – straight to the point
The alpha-type rapid radial drilling machine from DONAU offers high drilling capacity at a low price! It covers a vast range of workpieces, is very easy to operate and of robust structure. It is cost effective to use the drill for one-offs as well as for small series.
The machine is particularly suitable for workpieces where drill positions are easy to define. Three feed speeds and one spindle speed range, providing 18 spindle speeds, are making the alpha an ideal drill for all standard applications.
Large working area for much flexibility
Large drilling capacity
Easy sliding manual movement
Ideal for small seires at low tarif costs per hour | | |
 |
milling drilling center
milling drilling center | | |
|
|
|
|
Doranova Oy
|
|
 |
Cost-effective options for every farm
Doranova Ltd. offers new innovative concepts for controlling agricultural waste flow's, especially for handling sludge. With the help of our system, dry matter, concentrated fluid and pure water can be separated.
By that the sludge quantity can be reduced by as much as 70%. The gathered dry matter can be used as soil supplement or phosphate fertilizer. The concentrated liqud is easy to store due to its small capacity and, furthermore, it cantains nutrient fertilizer in a compact medium. The gained water is safe and can be reused or released into the nature.
| | |
 |
DoAct® product family - achievement of our own product development
Cost- efficiency and simplicity are at their best if you use our DoAct product family. We have developed and produce all DoAct filters ourselves and their operation does not demand, in normal circumstances, any additional measures besides monitoring the quality of purified water. The long maintenance intervals and the possibilities to change filtration media guarantee durability and ease of use.
If you order a DoAct filtration system from us, we will tailor the filtration media for the system always according to the purification project and harmful substances. The DoAct filtration systems is suitable for a wide variety of needs and projects of all sizes. The system is designed to be easily removable. The appealing features of DoAct systems are its speed and cost-efficiency. We have delivered a perfectly functioning filtering system in 12 hours!
TECH servicing package can be added to any DoAct filtering system. In this case, we take care of everything for the customer - transportation of the filtering system, implementation, starting, operation, checking, necessary maintenance works and termination. Could a purification project be easier than that?
| | |
 |
Soil - Water - Air Techniques for purification
Among others, we use technology as follows:
In-situ bioremediation
In-situ electrokinetic remediation
Biowall / Reactive walls
Bioventing
Pump & treat
Soil vapour extraction
Groundwater air sparging
Wet sorting technique
Microfiltration systems
Reverse osmosis system as well as landfill systems
Oil separators
Raw- and wastewater treatment systems
DoAct® -product family
Removal of radon from internal air and water of drilled wells
Removal of iron, fluoride and arsenic from drinking water
Wide choice of means ensures that our customers always get the best and most innovative technology in a cost-effective way. We know our equipment well and offer always the best solutions for our customers to deal with their environmental problems.
| | |
 |
The very likeable members of our DoAct product family are:
DoAct LIGHT easy filtering
DoAct MAXI container filtration system
DoAct BOOSTER pressure filtration system
DoAct METRO underground filtration system
DoAct GAS-TECH gas treatment centre | | |
|
|
|
|
Dorit Fleischereimaschinen GmbH
|
|
 |
Ham presses
Our presses enable three-dimensional form pressing of various products at 8 bar working pressure.
Our heavy-duty ham presses with pneumatic control to improve and promote the maturing process
of raw ham and long-life products, for optimum shaping, reduced cutting losses, solid consistency
and well-balanced distribution of the brine.
Information:
COMBI-PRESS CP-50
COMBI-PRESS CP-50-C
COMBI-PRESS CP-70
HAM PRESS
HAM PRESS WITH 1 ATTACHMENT
HAM PRESS WITH 2 ATTACHMENTS
Rugged, all stainless steel press designed for prepressing to the required calibre
and airless stuffing into casings, nettings, or bags in fully pneumatic operation
Pneumatic safety controls for simple operation and initiation of pressing and filling
processes by shutting the safety hood. Moulding and netting components can
be replaced in seconds without tools
Moulds come in 9 sizes, in calibres of 80 to 170 mm with a mould length of 500 mm
For cooked and drey cured meat products such as butt, shank and rolled ham,
picnic ham, various types of bacon, etc.
Compressed air controls: minimum 6 bar working pressure | | |
 |
Pickle injector
Typical for all Pickle injectors produced by the Meat Processing Equipment Group DORIT/DFT, is an even brine distribution achieved by an ideal needle pattern.
Appropriate injection and brine filtering systems ensure injection success with all kinds of brine of different viscosities. On top of this, our pickle injectors are also userfriendly in operation, in maintenance and in cleaning.
Sturdy new pickle injector for automated industrial production
Rugged, heavy-duty stainless-steel construction throughout
Needle head of air-cushioned needles in 4.5 mm / 3.0 mm diameter with
3.0 mm / 2.0 mm injection tips, easy to remove and replace
For injection of bone-in and boneless products | | |
 |
Vacuum Tumbler
DORIT/DFT is able to supply a complete range of vacuum tumblers with a capacity from 20 to 10.000 litres, due to our long history of production in this field. Within our expansive range of equipment, we can offer the ideal unit for butcher, shops or restaurants and hotels, as well as units for medium and large industrial processors. Further technological alternatives available to our customers are our vacuum pressure- and cooling tumblers, which work either together as a double-jacket version with glycol or as units, injecting liquid nitrogen or carbon dioxide. This procedure guarantees an optimal protein extraction.
Advanced meat processing machine in rugged stainless steel construction for
industrial meat processing plants and other large-scale operations
Ideal for the massaging of cooked cured products, salt impregnation and
braising and in-depth salting of dry cured products; dry salting, seasoning
and marinating, game and goulash; mixing of salads. dressings and sauces;
tenderising of fresh meats; salting, seasoning and processing of fish and
seafood products
Horizontally rotating drum with 3-point support on solid frame
| | |
|
|
|
|
Dornbusch Gravuren GmbH
|
|
 |
Embossing Plates
Embossing Plates are produced in large variety of sizes for an extemely extensive range of applications. First class skill and precision are crucial. | | |
 |
Hand Engarvers.
In spite of high technology, it is still necessary to utilise the highly skilled abilities of the Hand Engarvers | | |
 |
Production and engraving of Embossing Rollers
Production and engraving of Embossing Rollers of varying dimensions for numerous applications, requires a high degree of experience and skill. | | |
|
|
|
|
Dow Automotive (Deutschland) GmbH
|
|
 |
Dow Calcium Chloride
Calcium Chloride products from Dow have been trusted for over a decade. Our products, sold under the trademarks of PELADOW™, LIQUIDOW™, DOWFLAKE™ Xtra, COMBOTHERM™ and BRINERS CHOICE™ are used in a wide variety of applications, including snow and ice control, dust control, ready-mix concrete and agriculture. | | |
|
|
|
|
Dr. BOY GmbH & Co. KG
|
|
 |
BOY 12 A-M
The BOY 12 was specially designed and built for the manufacturing of micro-parts.
It is exceptionally compact and designed as a reliable small machine for continuous industrial duty.
The BOY 12 plasticizing units feed very small injection volumes of up to 0.1 cm³ with precision and repeatability.
Three plasticizing units are available with diameters of 12, 14, and 18 mm.
The BOY 12 is a fully controlled, hydraulic reciprocating screw injection moulding machine with a two-platen clamping unit. The clamping cylinders are integrated into the fixed platen. The clamping platen with linear guides, the special design for small moulds with precision centring of the clamping platens, specially designed feed openings, stainless steel hopper, a drawer for catching the micro parts and screw stroke recording with higher resolution are all examples of how the BOY 12 is optimally equipped for micro part manufacturing.
| | |
 |
BOY 22 A-M-D
This model has been produced since 1968 with the same basic technical design. To this day, more than 25.000 machines of this series were sold, with the machine concept being continously refined and the capacity increased. The BOY 22 has been perfected down to the last detail and excels through its high reliability and an extremely low machine hour rate.
This injection moulding machine is extremely compact and has a cantilevered clamping unit. The design is simple, organized, and ergonomic, with platen dimensions that are very generous. The injection unit can be optionally mounted vertically for parting-line injection.
The BOY 22 is available with three different controls:
• BOY 22 A with the high-end microprocessor Procan ALPHA control
• BOY 22 M with the mid-range Procan MD control
• BOY 22 D with the Dipronic control
| | |
 |
BOY 22 A/M VV/VH
The BOY 22 V injection moulding machines are used especially for the fully automatic encapsulation of inserts or for continous production lines. They are a modification of the BOY 22 and are manufactured with largely the same components.
The 90° rotation of the two-platen clamping unit results with the advantage of a fixed lower platen. Thus, the inserted parts will not move during the clamping process.
The BOY 22 VV offers the best possibilities for inserting and removal, compact dimensions, and ample free space for peripheral equipment on the rear machine table.
The vertical clamping unit can be equipped with either a vertical injection unit as with the
BOY 22 VV or with a horizontal (parting line) injection unit as with the BOY 22 VH.
| | |
 |
BOY 35 A/M VV
The BOY 35 VV injection moulding machine is equipped with a vertically arranged injection and clamping unit.
The 90° rotation of the two-platen clamping unit results with the advantage of a fixed lower platen. Thus, the inserted parts will not move during the clamping process.
Compact dimensions, ample free space for peripheral
equipment, and the ability to use smaller injection units make the
BOY 35 VV with four tie bars an ideal solution for fully
automatic encapsulation of inserted parts.
The BOY 35 A VV is equipped with the high-end
Procan CT ® control, the BOY 35 M VV with the mid-range
Procan MD ® control.
| | |
 |
BOY 55 A/M
The fully hydraulic BOY 55 injection moulding machine is characterized by its precision, high efficiency, and compact design.
Its low operating costs and reliable performance make it ideally suited for mass production.
The very compact design of the two platen clamping unit reduces the space required by the BOY 55 compared to conventional machine designs with the three-platen principle. Due to the cantilevered clamping unit, no additional space is required for part conveyors or containers. The ejector chute is freely accessible from all sides, permitting optimum removal of the moulded parts.
| | |
 |
BOY 55 A/M VV
With the introduction of the BOY 55 VV insert moulding
machine, BOY have expanded their range of machines.
As with the successful BOY 22 VV and BOY 35 VV
models, the design of the new BOY 55 VV is based upon
proven technology.
A clamping force of 550 kN, as well as shot weights up to 158.9 g (PS) max.
Generously spaced tie bars (360 x 335 mm) allow the mounting of both large and family moulds.
Low table height (distance between fixed lower platen and floor) of 975 mm.
The fixed lower platen was achieved by turning the standard horizontal machine´s two-platen clamping unit by 90 degrees. This advan-tageous configuration prevents the move-ment
of insert parts during the mould-closing phase of the cycle!
Compact dimensions and ample space for peripheral equipment on the machine sup-port guarantee optimum
opportunities for integration into automated production lines.
The new BOY 55 A VV is equipped with the Procan CT ® control,
the BOY 55 M VV with the mid-range Procan MD ® control | | |
 |
BOY 90 A/M
The fully hydraulic BOY 90 injection moulding machine (the largest machine in the BOY range) is characterized by its precision, high efficiency, and compact design.
Its low operating costs and reliable performance make it ideally suited for mass production.
The very compact design of the two platen clamping unit reduces the space required by the BOY 90, compared to conventional machine designs with the three-platen principle. Due to the cantilevered clamping unit, no additional space is required for part conveyors or containers. The ejector chute is freely accessible from all sides, permitting optimum removal of the moulded parts.
| | |
 |
Procan ALPHA ®
Since its introduction in 1998, the high-end control for the A series with touchscreen operation and windows-based display pages, has set standards which other companies were forced to follow.
Direct screen selection and input via touchscreen greatly simplifies operation.
The choice of six selectable speed ranges with additional ramp function for open, close, injection, and plasticizing are included in the standard scope and ensure smooth, harmonious movement sequences.
By using six individual hardware comparators, the shortest cycle and reaction times are achieved and the highest reproducibility is reached.
Communication with peripheral equipment and a visual display system are possible via the integrated industrial-standard personal computer. | | |
 |
Procan MD
This microprocessor control system, which has proven its value thousands of times, was introduced in 1993 and has become one of the most successful microprocessor control systems.
High reliability and simple operation are characteristic features of this control system for the M series.
The combination of hardware control and microprocessor facilitates shorter sequence and cycle times - an advantage that is welcomed by many users.
Further advantages of the PROCAN MD include integrated help texts, message and alarm signalling systems, and SPC / SPQ functions meeting the requirements of Q 101 standards.
Via keycard, the Procan MD control is protected against unauthorized access.
| | |
|
|
|
|
DR. COLLIN GmbH
|
|
 |
Measuring Roll Mills Type M
Instrumented roll mills by COLLIN are indispensable for all processes of development and production control. The high precision of the setting parameters and the high number of integrated measuring equipment allow a reproducible determination of characteristic material data which helps establishing the optimal setting parameters for all production machines.
Available models:
Type W 150 M, Type W 200 M, Type W 250 M
| | |
 |
Strand Pelletizers Type CSG 171/1
Strand Pelletizers Type CSG 171/1
The basic system has one drive for a pre-defined pellet length of approximately 3 mm.
Strand Pelletizers Type CSG 171/2
with two drives.
Two independent, variable drives allow infinite adjustment of the pellet length from 0.8 up to 5 mm.
| | |
 |
table top compounders
table top compounders | | |
 |
table top platen presses
table top platen presses | | |
 |
table top roll mills
table top roll mills | | |
 |
Testing Extruders for Thermoplastic Material
Different processing lengths and screw geometries guarantee a wide area of application. Venting zones, interchangeable grooved bushes, stroke adjustment systems and many more features allow for an extremely versatile application in setting up extrusion lines.
As standard, all extruders are equipped with microprocessor control contained in a swing-out unit above the extruder.
Available models:
Screws Ø in mm: 16/20/25/30/45
Processing lengths in L/D ratio: 10 to 40
| | |
|
|
|
|
DOJATEC Sonermaschinen GmbH
|
|
 |
Eggwash systems
Eggwash systems | | |
 |
Fat Glazing systems
This part of our homepage gives you an overview of all the Fat Glazing systems we offer. Feel free to contact us for further informations and informations about special constructions | | |
 |
Glazing/Icing systems
Glazing/Icing systems | | |
 |
Special machines
This are just a few of the Special machines and constructions we have already built - to give you an short overview of possible solutions for special tasks. Feel free to contact us for further informations | | |
 |
Transport systems
This part of our homepage gives you an overview of all the Transport systems we offer. Feel free to contact us for further informations and informations about special constructions.
| | |
|
|
|
|
DOERKEN MKS - Systeme GmbH & Co. KG
|
|
 |
Dip draw coating system
Dip draw coating system | | |
 |
Dip spin coating system
Dip spin coating system | | |
 |
EC-Automat 2000 +
Coating lines / EC-Automat 2000 + / | | |
 |
Spin coating system
Coating lines / Spin coating system / | | |
|
|
|
|
Dietz & Rollwa Automation GmbH
|
|
 |
Automatic assembly units with speed-controlled rotating systems for fully-automated final assembly of multipart production items
The high-speed automatic assembly units from Dietz & Rollwa are innovative systems for the
final assembly of multipart production items. They are designed as single-line, modular complete
plants and can be supplied with one or more turntables depending on the requirements of the
particular application. Depending on the requirements and the type of product being handled,
the assembly throughput rate can be set between 350 and 1500 parts per minute | | |
 |
Bunker systems and bulk material conveyors
Bulk goods are usually transported with filler bunkers, bunker conveyors and sloped bunker conveyors.
These systems enable level-controlled filling of sorting devices and need to be specifically adapted
to the production process in order to ensure that the requirements in terms of output volumes
and cycle intervals are satisfied. Dietz & Rollwa supplies standard and special versions for a wide range
of applications.
| | |
 |
connectors
connectors | | |
 |
Feed magazines in many different forms as linear vibration rails, step magazines, conveyor belts or pneumatically driven supply rails
Feed systems ensure that parts are delivered to a process stage in the required quantity and in an
accurately defined position and orientation. We can supply single or multiple line guide rails with a
variety of conveyor technologies - equipped with an integrated jam monitor for a continuous and
steady feed rate, accurately matched to the properties and geometry of the parts being transported | | |
 |
pipe fittings
pipe fittings | | |
 |
Sorting systems in many different guises from slope conveyors, step conveyors and oscillating conveyors to disk sorters
For most applications, oscillating conveyors represent an ideal - and cost-effective - means of delivering
bulk materials in exactly the required manner to the next stage in the production chain. We develop solutions
which are perfectly matched to the particular production task and take into account both the geometry of the
parts being conveyed as well as the required throughput rate. | | |
|
|
|
|
Dinnissen BV
|
|
 |
Conveying equipment and systems
Our product manufacturing and process design activities are carried out in-house, thereby ensuring that we have maximum control of quality and delivery time. This also gives us added flexibility and ensures that we can always deliver on our agreements. | | |
 |
Feeding & Weighing
Filling and weighing Big-Bags and FIBCs in situations which are just a tad more complex? It should be reassuring to know that we already have experience in solving practically any kind of problem that can arise in the food, feed, pharma and chemical sectors. Efficiently and ergonomically. | | |
 |
Milling & Grinding
Grinding to the exact particle structure desired – quickly and efficiently – while minimizing energy consumption, product loss and contamination; mixing solid and liquid ingredients to obtain exactly the right composition, as homogeneously as possible and as flexibly as possible – by switching, combining and varying | | |
 |
Mixing & Processing
Dinnissen mixing systems for a wide range of materials – including powders, granules, and flakes – and for injecting and spraying on liquids have proven themselves in various industries. Our point of departure is always the quality required for the mixed product. | | |
|
|
|
|
Diosna Dierks & Söhne GmbH
|
|
 |
Crumbing Machines
Commercial use of unsold products
· Rough grinding of grain and seeds
· Reduction of ingredients just before they are used to cut purchasing costs, improve freshness and simplify storage
Standard equipment: · 2 plate sieves (10 and 20 mm)
· 1 screen (6 mm)
· 1 collecting bag
· 1 filling hose
· 1 spreader ring for continuous feeding
Description:
The DIOSNA RZ 4 Crumbing Machine for waste bread is universal, highly effective and therefore also very efficient.
The effectiveness of the DIOSNA RZ 4 Crumbing Machine is due to the interaction of the crumbing tolls with sieves. Plate sieves and sreens of varying sifting fineness to produce all grades from pulverized breadcrumbs to coarse reduction of waste bread, cake, etc.
The DIOSNA RZ 4 is made almost entirely of stainless steel. It is mobile, of compact space-saving design and the official German GS safety approval. The filling funnel with antiscatter opening features a rapid-action lock so that the entire unit can be easily folded back for easy cleaning.
A powerful direct drive is combined with an effective braking facility for simple and completely safe operation.
| | |
 |
Kneading Machines
Convincing mixing technique in dough-making | | |
 |
Mixing Plants
High economy with automatic dough-making | | |
 |
Rapidojet
The revolution in dough-making | | |
 |
S 200 A to S 240 AZ The kneading strength for successful bakeries
High mixing intensity
· Guarantees increase volume of product
· Especially suitable for wheat, rhy and whole-meal doughs
· Functional bowl covering cap for non-penetration of dust
· Movable bowl with standard DIOSNA bowl clamping device
· Simple cleaning
· Easy to operate, almost maintenance-free
· Programmable time sequence, manual intervention possible at any time
· Optional data memory with membrane keyboard
| | |
 |
Spiral Mixers
mobile with fixed bowl
· or 12 kg, 24 kg, 40 kg, 80 kg, 120 kg, 160 kg dough
· large kneading zone for short mixing times
· ideal mixing process for batches of all kinds
· easy to operate
· smooth surfaces, easy to clean
· requires practically no maintenance
· ideal mixing process for programmable time sequence, manual intervention possible at any time
· Optional data memory control with membrane keyboard
· practical bowl cover for dust-free working
· large power reserves, convincing quality assurance
Description:
The DIOSNA Spiral Mixer SP will convince you with its performance in preparing all kinds of dough: from demanding wheatmeal dough via mixed bread dough through to wholemeal dough. Batches of every size, from small batches through to full bowl loads, are mixed with optimum results. | | |
 |
Stirring and Beating Machine RS 40 CS N
made from stainless steel
· suitable for bowls from 16 to 40 l bowl content
· infinitely variable speed regulation
· high speed range (120 to 2600 rpm)
· beater deflection and height of bowl infinitely variable
· bowl lightning
· additional socket
This is progress:
· easy operating computer control for simple programmation of 100 recipes.
· respectively 5 time and 5 rotational speed intervals can be assigned to each program.
· the speed is infinitely variable. A large display shows the actual status of the process at anytime.
These stirring and beating machines have been developed for all users who place high demands on quality when producing different mixtures and want to work very efficiently. These machines have made an excellent reputation for themselves | | |
 |
Universal Mixer
Universal Mixer V 10 - V 200
Mixing, moistening, agglomerating and wet granulating | | |
|
|
|
|
DISKUS-WERKE Schleiftechnik GmbH
|
|
 |
grinding elements
grinding elements | | |
 |
horizontal spindle
horizontal spindle | | |
 |
IONIC
IONIC18 in machine control panel
The Diskus IONIC18 is a measuring control for computer-supported regulation of the finished dimensions of parts produced in continuous operation with face grinding machines. It is available as a single unit or as an integrated version in the machine control panel. | | |
 |
Vertical spindles
Vertical spindles | | |
|
|
|
|
DMA Maschinen- und Anlagenbau GmbH & Co. KG
|
|
 |
Cage stack transfer device with cage storage
Empty containers are efficiently put into storage with the help of this system, or are added to the manufacturing process as needed. The greatest possible ground clearance of the system offers a high degree of hygiene through optimal cleaning possibilities | | |
 |
Combining
The arriving multi-lane product lines are combined to one line | | |
 |
Conveying systems
In large bakeries, the DMA systems are already in successful use for the automation and support of a trouble-free manufacturing process | | |
 |
Conveying systems
Transportation of bottles / glasses from pressureless separation up to the palletiser infeed. Upon customer request, available in single-strand or multi-strand design with the appropriately required guide rails.
| | |
 |
conveying technology
conveying technology for the food industry | | |
 |
Heliflex Storage System
To increase product line efficiency, it is necessary to intercept system-bound faults. By using the Heliflex Storage System, the effectiveness of an entire product line can be increased by 5% to 20%. | | |
 |
Spiral conveyor
Long conveying distances (e.g. product cool down) are implemented in a space-saving manner with the spiral conveyor. | | |
 |
Stacker and Destacker
For plastic cages, for example
With a capacity of 2,500 cages per hour, the containers are stacked or destacked to load them onto downstream transport lines or to cage storage.
| | |
|
|
|
|
DMH Maschinenhandel Deutschland GmbH
|
|
 |
CANDY PROCESSING MACHINES
Confectionery production and packaging lines
Complete lines and spezial machinery for manufacturing and processing of chocolate, cocoa, nuts
Mogul plants, Hardcandy lines, Starchless lines | | |
|
|
|
|
DoALL Sawing
|
|
 |
2013-V3 - Vertical Contour Saw
PRODUCTIVITY PACKAGE
Frame
Unitized Frame arc-welded steel
Band Speed
Variable Band Speed 30 to 320/550 to 5,500 fpm (9 to 98/168 to1,675 mpm)
Work Height
13 in. (330 mm)
Band Wheels
Wheels aluminum with crowned rubber tires
Band Width Capacity
Band Width Capacity 1/16 to 1 in. (1.5 to 27 mm)
Table Size
Table 26 x 26 in. (660 x 660 mm), tilt 45°R, 10°L
Band Length
Saw Band Length 12 ft. 10 in. or 154 in. (3,910 mm)
Upper Wheel Adjustment
Upper Wheel Adjustment 3 in. (75 mm)
Band File Length
File Band Length 153 in. (3,890 mm)
Color
DoALL Blue
| | |
 |
C-430A - Production Power Saws
Max Cutting Capacity
17 in. high x 17 in. wide (430 x 430 mm) rectangles, 17 in. (430 mm) rounds
Blade
Band saw blade 1-1/4 x 180 in. (34 x 4,575 mm)
Band Speed
Infinitely variable band speed drive 60-400 fpm
Motor Capacity
Total motor capacity 7.5-hp (5.5 kw)
Band Drive
Band drive 5-hp (3.7 kw)
Hydraulics
Hydraulic system 2-hp (1.5 kw)
Band Wheels
Wheel diameter 20 in. (510 mm)
Coolant Pump
Coolant pump 1/10-hp (.075 kw)
Min Butt End
Min. butt end with automatic feed 4 in. (100 mm)
Pass Line Height
(minimum) 30-1/2 in. (775 mm)
Index Length, Single
Single automatic index length 20 in. (510 mm)
Color
DoALL Blue
Index Length, Min
Min. automatic index length 3/8 in. (10mm)
| | |
 |
C-916M - General Purpose Saws
Max Cutting Capacity
At 90° 9 in. high x 16 in. wide (230 x 405 mm) rectangles 10-3/4 in.(275 mm) rounds
Band Tension
Band Tension spring loaded by handwheel
Max Cutting Capacity-Right
At 45° 9 in. high x 8 in. wide (230 x 200 mm) rectangles 8 in. (200 mm) rounds
Band Wheels
Wheels 14-1/2 in. (370 mm) dia. cast iron
Band Length
Band Length 158 in. (4015 mm) max.
Vise
Vise manual
Band Speed
Band Speed variable, 105 to 275 fpm (32-84 m/min)
Coolant Capacity
Coolant System 5 gal. (19 liters)
Band Feed
Feed Control infinitely variable, hydraulic control, spring-balanced head
Color
DoALL Blue
| | |
 |
C-916S - Angle Cutting Saws
PRODUCTIVITY PACKAGE
Max Cutting Capacity
At 90° 9 in. high x 16 in. wide (228 x 406 mm) 10-3/4 in. rounds (273 mm)
Band Tension
Band Tension spring loaded by handwheel
Max Cutting Capacity-Right
At 45° 9 in. high x 10-3/4 in. wide (228 x 273 mm wide) 10-3/4 in. rounds (273 mm)
Band Wheels
Wheels 14.5 in. diameter cast iron (368mm)
Band Length
Band Length 159 in. maximum (4038 mm maximum)
Vise
Vise manual
Band Speed
Band Speed variable, 105 to 275 fpm (32 to 83 mpm)
Coolant Capacity
Coolant System 5 gallons (19 liters)
Band Feed
Feed Control infinitely variable, hydraulic control, spring-balanced head
Color
DoALL Blue
| | |
 |
DoALL Plate Saws - Special Application Saws
Work Height
18" (460 mm)
Band Drive
15 HP (11 kw)
Band Width Capacity
2" to 2-5/8" (54 - 71 mm )
Band Wheels
Dual-size band wheels
Band Speed
Variable Band Speed 40-360 FPM (12-110 m/min)
Color
DoALL Blue
| | |
 |
saw blades
Bi-Metal saw blades
| | |
|
|
|
|
DOCERAM GmbH
|
|
 |
| | |
 |
DOCERAM
Ceramic centring pins
Locating pins
Change and base electrodes
Complete electrodes
Alignment pins
Gas nozzles
CAD/CAM blanks for dental application
Various ceramic parts for machinery equipment | | |
 |
DOCERAM Advanced Ceramic Solutions
DOCERAM
Advanced Ceramic Solutions | | |
|
|
|
|
Dr. Faulhaber, Fritz, GmbH & Co. KG
|
|
 |
Brushless DC Motors
Brushless motors are electronically commutated and have extremely long operational lifetimes
Consists of a brushless motor with integrated drive electronics
Feedback output available
No cogging
Dynamically balanced for extremely smooth performance
| | |
 |
Coreless DC Micromotors
Coreless rotor means no cogging or preferred rotor position
No iron losses
Extremely low current consumption
Low starting voltage
Low rotor inertia for extremely fast acceleration and braking
Extremely light and compact
Smooth and accurate speed, position, and torque control
Custom systems available from design to production
Higher power to volume than other DC motor technologies
High precision gearboxes available in all sizes
Feedback components available in all sizes
Control electronics available for all motor series
| | |
 |
Encoders
Integrated with the motor
Diameter matching the motor type
Extremely low current consumption
Extremely light and compact
Available in analog and incremental output
Easy to interface
Custom systems available from design to production
| | |
 |
smoovy® Miniature Drive Systems
No cogging or preferred rotor position
No iron losses
Extremely low current consumption
Extremely light and compact
Smooth and accurate speed, position, and torque control
Electronic commutation for extremely long operational lifetime
High precision gearboxes available in all sizes
Control electronics available for all motor series
Available as linear actuator
Custom systems available from design to production
| | |
|
|
|
|
DR. JOHANNES HEIDENHAIN GmbH
|
|
 |
Encoders
Rotary encoders | | |
 |
Gauges
Length gauges | | |
 |
Measuring systems
Length measuring systems | | |
 |
Position Display Units
Position Display Units
Digital Readouts
Position display units serve to visualize the values measured with linear encoders, length gauges, rotary encoders or angle encoders. Areas of application include:
Measuring and inspection equipment
Dividing apparatuses
Monitoring of measuring equipment
Manual machine tools
Measuring machines
Position displays from HEIDENHAIN are designed to be highly user-friendly. Typical characteristics are:
Highly readable, alphanumeric display
Simple, logically arranged keypad
Ergonomically designed push-button keys
Splash-protected front panel
Sturdy die-cast housing
Most position display units feature a data interface for further processing in the higher-level electronics or simply to print out the measured values.
| | |
 |
Position indicators
Position indicators | | |
 |
TNC 320 - The Compact Contouring Control for Milling, Drilling and Boring Machines
Thanks to its flexible operating concept – workshop-oriented programmability with HEIDENHAIN conversational programming or external programming – and its scope of features, it is especially suited for use on universal milling, drilling and boring machines for
series and single-part production
tool and die making
manufacture of machines
research and development
prototype production and testing facilities
repair departments
educational and training institutes
The TFT 15-inch color monitor shows a clear overview of all relevant information for programming, operating and inspecting the machine tool and control such as program blocks, comments and error messages. More information is provided through graphic support during program entry, test run and actual machining.
The selectable split-screen display shows the part program blocks in one half of the screen and the graphics or the status display in the other half.
During the course of the program, status displays will always offer information on tool position, the current program, active cycles and coordinate transformations, and other data. The TNC 320 even shows the current machining time.
| | |
|
|
|
|
Duravit AG
|
|
 |
bathtubs
bathtubs | | |
 |
bathroom furniture
bathroom furniture | | |
 |
lavatory bowls
lavatory bowls | | |
|
|
|
|
Durbal Vertriebsgesellschaft GmbH
|
|
 |
accessories
accessories | | |
 |
DURBAL® accessories
GW threaded links
DDG washers
BOK threaded bolts | | |
 |
DURBAL® BEF - heavy-duty rod ends with integral spherical plain bearing in stainless steel
female thread; maintenance free, adapter sizes according to DIN ISO 12240-4, series K, thread according to ISO 8139
rod end housing stainless steel 1.4301, rolled thread, surface with pickling treatment
joint ball stainless steel, hardened and ground, surface superfinished
race nylon / teflon / glass fibre compound
| | |
 |
DURBAL® BEM - heavy-duty rod ends with integral spherical plain bearing
male thread; maintenance free, dimensions in inches
rod end housing forged steel, tempered, rolled thread, surface galvanized, free of Cr VI
joint ball ball bearing steel, hardened and ground, surface superfinished and chromium plated
race nylon / teflon / glass fibre compound
| | |
 |
DURBAL® heavy-duty rod ends with integral spherical plain bearing
BEM, BEM in inches, BEM in stainless steel
BEF, BEF in inches, BEF in stainless steel
EM, EF | | |
 |
heavy-duty rod ends
heavy-duty rod ends | | |
|
|
|
|
DURFERRIT GmbH
|
|
 |
Masking compounds
Masking compounds are used in the thermochemical treatment of metals (mainly steel) to prevent elements such as C, N or B, which enhance the hardness, from diffusing into certain areas of the components.
Masking compounds with a solvent base to protect against carburization in a partial vacuum.
Durferrit Contradur UDK is a solvent-based masking compound which was specially developed for use when carburizing at low pressure or under vacuum, and which can also be used in gas carburizing
Some of the features of Contradur UDK are:
the protectants have a minimum vapour pressure
the product does not run while in the furnace
there are no problems during high pressure gas quenching
it can be easily removed with water in an industrial washing machine after heat treatment.
Solvent-based masking compounds are used when the thermochemical heat treatment is to be carried out in gas atmospheres. Durferrit Contradur and Contradur OX can also be used for protection when carburizing in granulate.
| | |
 |
Nitrocarburizing
The term nitrocarburizing means an enrichment of the surface layer of ferrous materials with nitrogen and a small amount of carbon. This thermochemical treatment improves the wear resistance and the fatigue strength.
Used with a strongly oxidizing cooling bath - TENIFER®-QPQ - wear and corrosion resistant surfaces with an attractive black appearance are produced.
Products used in nitrocarburizing
TF1 cyanide-free top-up salt for TENIFER® baths*; used for treating ferrous materials. Used only in combination with the REG 1 regenerator. Working temperature 480 - 630°C.
REG 1 environment-friendly, nontoxic regenerator for TF 1 baths
AB 1 oxidative salt for cooling parts treated in TF 1 baths; greatly enhances the corrosion resistance (TENIFER®QPQ process). The well-known traditional Durferrit NS salts are still available*. | | |
 |
Plant Technology
In recent years, environmental demands have led to developments which have opened completely new perspectives for the salt bath technology of Houghton Durferrit GmbH, with its more than 75 years of experience.
The concept of effluent-free salt bath heat treating systems developed by us, and in successful operation for over 10 years, enables processes to be performed without liquid wastes occurring. In addition, it is also possible to minimize the water consumption by using a modern cascade technique.
After being heat treated, the components are thoroughly rinsed in a cascade system which requires a minimum of fresh water, and which processes the relatively small amount of rinsing water very economically. This system is automatically included in offers for new heat treating plants.
Furthermore, our waste air cleaning plants remove the salt fumes occurring above
the salt baths. This means the German Regulations for protecting operators at the work place (MAK limits) can be kept to with no difficulty. The purity level of the cleaned air complies with the German TA Regulations.
Our speciality is the solving of individual heat treating problems, and we can document our success in almost all branches of industry. Given overleaf are just some of the fields of application and use in the heat treating sector.
| | |
 |
Salt bath technology
Durferrit salts are used as salt melts within a temperature range of 150°C to 1300°C:
The extremely high heat storage capacity and the heat transfer properties of salt melts are used to good effect for the transfer of heat in chemical reactors in the chemical and rubber processing industries. These chemical reactors contain up to several 100 tons of salt.
In the rubber processing industries rubber profiles, among other products, are vulcanized in continuously operating plants.
Vulcanizing plant | | |
|
|
|
|
Durocas GmbH
|
|
 |
filter tubes
filter tubes | | |
 |
assembly work
assembly work | | |
 |
Cheese moulds of plastics in various designs
from single moulds to complex block forms for soft or hard cheese. Smallest quantities and large quantities possible. | | |
 |
Draining platforms
Draining platforms in various designs made of stainless steel, aluminium and plastics. Complete complex filling units consisting of draining platforms, draining mat and cheese moulds made-to-measure the respective type of soft cheese. | | |
 |
filter cloths
filter cloths | | |
 |
filter elements
filter elements | | |
 |
industrial nonwovens
industrial nonwovens | | |
 |
Multi-purpose ribbons
Multi-purpose ribbons made of technical tissues for draining, pressing, drying. Various seam connections available! | | |
|
|
|
|
DÜRR ECOCLEAN GmbH
|
|
 |
Cleaning
offers needs-based standard solutions and tailor-made systems for cleaning and burring work pieces, thereby covering the needs of the automotive industry, its suppliers and the diversified industrial market. | | |
 |
Conveyor Techniques
Dürr conveyor techniques market success is based on ongoing innovation and compliance with customer-specific requirements.
At the same time, we follow an ongoing policy of consistent standardization of a product range on the basis of state-of-the-art quality standards. As a systems supplier within the Dürr Group, we offer integral materials-handling solutions over all stages of production of an automobile plant, from the body in white through paint shop to final assembly with the finishing area. Close integration of the customer in our project teams, whose members have good technical and personal competence and good social and communication skills, means that we achieve our supreme aim of customer satisfaction.
| | |
 |
Ecopaint Booth - Excellent paint application whatever your needs
The spray booth – the heart of the paint shop – is built up of modules incorporating easy to clean components that can be adapted flexibly to suit your requirements.
On request, Dürr designs and installs spray booths with integrated application and conveyor technologies based on process parameters, such as building details, space availability, capacities and throughput times.
Heat recovery, air conditioning and paint overspray scrubbing are all part of the product, as is its ease of maintenance.
The completeness of the system assures effective interaction of all components so that high first run rates are attained whilst energy consumption is minimized and unit costs are reduced. Process-oriented simulation at an early stage assures the best possible implementation of all processes.
All Ecopaint Booth components are brought together via standardized, well-matched interfaces. This allows us to find individual solutions and alignment with even the most varied of requirements.
Thanks to standardized and pre-assembled components, plans can be implemented quickly and production lead times kept to a minimum while maintaining high process reliability and quality. You can profit in all phases: when a new plant is installed, when a plant needs to be adapted or extended or, later, when revamping or modernization is called for.
| | |
 |
Ecopaint WetSystem – Optimal vehicle preparation
Dürr plans, implements and modernizes complete painting systems. Ecopaint WetSystem is the brand name of our modular wet treatment system that stands for perfect corrosion protection for your vehicle body and for its quality and value retention.
Ecopaint WetSystem ideally unites all components and modules via integrative interfaces to form complete systems and assure
highest quality
minimum costs per unit
resource conserving and energy saving operation
Our plants also stand for environmentally compatible water treatment and resource conserving consumption – integrated recycling systems save energy, water, chemicals and ED paint.
Throughout the entire cleaning, pretreatment and ED process we make sure that all components combine to form a well-harmonized system. We have the knowledge and expertise to handle interfaces and our processes are absolutely reliable thanks to standardized components and parts that we design, integrate and implement ourselves.
These components include:
Dip tanks and spray system tanks
Modular tunnel segments with integrated spray systems
Filter systems for bath management
Pump, filter and heat exchanger assemblies
Ultra filtration plants for paint and oil
Standardized dialysis cells
Conveyor systems perfectly coordinated to suit capacity | | |
 |
FASfloor Floor conveyors
Our product group FASfloor comprises a wide range of floor conveying systems. Conventional solutions such as skid, slat and belt conveyors are extended by trailblazing developments. Among them modular chain conveyors for use in wet production areas or TTS inverted, an efficient alternative to skid conveyors.
The non-contact energy and data transfer FASmotion is highly efficient yet requires little maintenance and offers new possibilities for all systems. Skillet conveyors can be realized in the usual way with a busbar or with FASmotion. The automatic guided vehicle FASmatic® completely eliminates the need for batteries. Instead FASmotion provides the energy for its movement and for the entire working processes carried out with it as well
| | |
 |
Industrial Fluid Filtration
offers the latest filter systems for the reliable, environmentally friendly and efficient processing and reconditioning of cooling lubricants and industrial liquids.
| | |
 |
Paint Systems Industrial – Industrial paint plant competence from a single source
The Paint Systems Industrial product line plans and builds turnkey paint shops for metal and plastic vehicle parts, heavy duty trucks, agricultural and construction machines, buses.
As general contractors we offer total solutions for:
process, application and environmental systems
conveyor systems
control, automation and supervisory control technology
Our global standards ensure that the production products we supply are of the same high quality worldwide.
We also pursue a strategy of consistent modularization. As a result plant modules can be combined easily and flexibly to form very individual systems with attractive benefits:
lower investment costs
shorter implementation times
high uptime availability
If you need support in the operation, modernization or expansion of your paint shop, our Services & Solutions Teams are also the partners to choose. In addition to supplying spare parts, training courses and plant optimization services, our Dürr revamp concept considers the bigger picture, taking a comprehensive approach to the modernization of existing plants and equipping them to meet the demands of the future.
| | |
 |
Perfectly automated and interlinked processes
develops and produces systems fit for the future ensuring the flexible handling of work pieces. And more than that, this company division uses coordinated solutions to provide a smooth material flow and optimum interlinking of individual process steps in manufacturing.
| | |
|
|
|
|
DWT GmbH
|
|
 |
Handheld tyre inflator digital and precise
The ACCURA Unit is a robust yet sophisticated handheld electronic tyre inflator designed to break the mould of existing handheld tyre inflation. With leading electronics and sensor technology as well as patented software algorithms it offers fast, accurate and trouble-free tyre inflation and deflation.
- driven by the simplicity of use and clear display - fast inflation and deflation rates - high levels of speed, accuracy and safety - long product life - flexible usage - individual testing, exceeds EC Directive 86/217 Technical features: - Robust electronic design - Ceramic sensor - Clear and easy to read digital display - Modern, lightweight and shock resistant construction - Proprietary software increasing accuracy, fine metering and eliminating the chance of false readings - Direct valve design increasing inflation and deflation rates -Individually tested and certified
Also the AIRFORCE dial unit is designed for fast inflation and deflation rates and long product life - flexible usage - individual testing, exceeds EC Directive 86/217
Technical features: Clear and easy to read dial display - Modern, lightweight and shock resistant construction - Direct valve design increasing inflation and deflation rates -Individually tested and certified
| | |
 |
membrane wall sawing system for waterwall panels of boilers in on-site steam boiler maintenance applications
In maintenance of industrial high pressure steam boilers panel wall cold cutting is an important step before weld preparations. To avoid any heat affected zone (HAZ) on the boiler tubes of the water wall panels, the sawing of the defective panel wall tubes should be done not by flame cutting but instead with the BWC cutting system, that uses abrasive saws. The system increases safety of workers and works with high productivity. Due to the straight cut you will have less wearing of cutting discs and caused by the high cutting quality you have less after work.
Advantages:
No heat affected zone
increased safety of workers
less wearing of cutting discs
high productivity
high cutting quality
less after work
| | |
 |
MF 3-R tube beveling machine
BABCOCK tube beveling machines for steam boiler maintenance of boiler tubes
Portable boiler tube beveling machines for on-site tube end preparation and bevelling of panel walls, boiler components and single boiler tubes have a high metal removal rate, are easy to handle and are constructed in a rugged and compact way. Especially for supercritical boilers and high pressure steam boilers these boiler maintenance tools are designed for narrow space applications in steamboiler service applications. A perfect weld preparation of boiler tubing is getting more and more important for modern boiler work. The quality of tube end forming and tube chamfering before welding of boiler tubes is crucial for the final result of welding.
The BABCOCK tube beveling machines have been developed by the boiler manufacturer BABCOCK for the need of their own maintenance people on-site. Their high working speed and quick readyness for use allow economic boiler manufacturing and boiler maintenance.
range: 12-44,5 mm o.d.
weight: 4,8 kg
spindle stroke: max.15mm
wall thickness: max.10 mm
drive: pneumatic / electric | | |
 |
MF 3iw pipe bevelling machine
Pipe end preparation with BABCOCK pipe bevelling machine for pipe bevelling of pipe end prep
A complete range of portable pipe bevelling machine and pipe beveller for weld preparation and orbital welding on-site makes pipe chamfering and pipe machining easy to be done. All pipe end prep machines are available with electrical or pneumatic drive. Due to aluminum housing the machines have a very low weight, which makes beveling work of heavy duty pipes with high wall-thickness on-site a lot more convenient. A large application range and special tools for bevel applications are available. Pipe end preparation is also necessary for orbital welding to achieve the best pipe weld edge preparations with outside bevelling and inside bevelling.
MF 3iw pipe bevelling machine
pipe range: 16,2-96mm i.d.
weight: 5,8 kg
spindle stroke: max.20mm
wall thickness: max.15 mm
| | |
 |
Nitrogen tyre inflation
Since more than 10 years DWT offers a complete range of nitrogen generators for nitrogen tyre inflation in more than 20 countries. We offer a high quality product and a perfect technical concept with our product range of nitrogen inflation systems for nitrogen tyre inflation | | |
 |
Portable heavy duty clamshell for cold pipe cutting of heavy wall with high wall-thickness
The portable clamshell pipe cold cutting system has been developed in cooperation with European Offshore industry. A high metal removal rate, a large adjustment range and an easy setup is given with these outperforming clamshells. The portable pipe cutter avoids any heat affected zone (haz). Specially designed for heavy wall pipes with high wall-thickness in heavy duty applications. Their high working speed and quick readiness for use allow economic manufacture.
Split-Frame Technology for endless tubes
Extremely low weight for easy handling and lifting
Compact dimensions for use in areas with limited access
Quick and safe clamping and adjustment
Developed with „On-Site Know-How“ | | |
|
|
|
|
Dyadic International
|
|
 |
dyadics fibrezyme LBL
dyadics fibrezyme LBL improves the efficiency of pulp bleaching | | |
 |
Gene Overexpression & Optimization
Dyadic has developed and continues to develop innovative tools for gene expression via its proprietary fungal host, Chrysosporium lucknowense, or C1. This host organism is Dyadic’s premier system for the overexpression of genes and the production of proteins that until now have been difficult to express and produce in other systems.
Dyadic’s C1 overcomes the limitations of other host systems – such as bacteria and yeast – commonly used by industry for expressing genes from natural sources. (View Diagram.) Unlike bacteria and yeast, C1 efficiently splices introns, and its glycosylation - or sugar structures - are similar to those observed in mammals.
Dyadic’s integrated C1 technology is primed for optimization of the host production organism as well as the manufacturing process. This creates a number of proven, differentiating advantages over current gene expression systems, including:
- Extremely efficient protein production and secretion
Protein yields from C1 are unprecedented in the industry.
- A variety of both inducible and constitutive promoters
Dyadic’s integrated gene expression system provides a variety of genetic switches to choose from, thus increasing the likelihood of successful expression.
- Varying host genetic backgrounds
Host strains with varying genetic backgrounds are currently in development, to ensure successful gene expression for each project’s objective. Whether the goal is to produce large amounts of protein inexpensively, or to produce a single protein in pure form, C1 has a host system that will be well suited for either target.
- Favorable growth conditions
C1 can grow and express proteins over a wide range of pH and temperature, allowing for gene expression under conditions optimal for the activity and stability of a wide range of targets. A particular advantage of C1 over other fungal expression systems is its ability to produce proteins at neutral pH, allowing for the production of proteins of physiological and biopharmaceutical interest.
| | |
 |
Strain Improvement and Process Development
Dyadic’s research teams have the proven ability to bring biological products to market in minimal time. This is largely due to the pairing of strain and fermentation development processes, so that information from one naturally leads to improvements in the other. When combined with the use of hyper-producing C1 strains possessing excellent promoters, expression cassettes, and transformation techniques, these processes contribute to economically viable levels of protein production achieved in a short time.
The success of this approach is evident in Dyadic’s first major research program – the discovery and development of neutral cellulases in Chrysosporium lucknowense, or C1. Within one year, the wild strain of fungus discovered in the soil of eastern Russia was brought to commercial reality by Dyadic researchers. This achievement was followed by another significant advance when the same researchers tripled C1’s enzyme levels the next year.
It is this integrated approach to discovery and innovation that gives Dyadic the edge to develop groundbreaking new products from the earth’s vast gene pool, bringing nature to the marketplace.
Please visit Partnering Opportunities to find out how Dyadic can work with you to break the bottlenecks in your genomic research and development programs.
| | |
|
|
|
|
Dynamis AB
|
|
 |
Bin-picking
Using a robot arm, the SensActive® Bin-picking grips and moves objects directly from transport packaging, such as EURO-pallets. A material handling system like this can supply parts to a manufacturing machine or carry out a step in the assembly process.
Objects can lie in an unorganized pile in the transport packaging. Spacers do not need to be placed between layers. In fact, object layering is completely unnecessary since a 3D measurement analysis technique is used. System versatility also makes it possible to quickly adjust the system when changing components.
| | |
 |
Developing customized systems
Dynamis also develops customized systems to meet special demands. The manner in which we apply our 3D technology opens the door to a wide range of interesting possibilities and advanced solutions for the automatic handling of even intricately shaped objects.
Contact us if you have an complex component or part that you want to handle as efficiently as possible in your manufacturing process, or in any other industrial context.
We would be happy to submit a proposal for a solution and provide you with relevant references from work we have done elsewhere.
| | |
 |
Pattern Laying
SensActive® Pattern Laying makes it easy to organize objects through a remarkable 3D programming tool. With the help of an easy-to-manipulate, 3D-CAD model on the system display, the operator simply indicates the pattern in which he or she would like the objects to be organized. The robot then takes over, organizing the parts into the desired pattern automatically. | | |
 |
SensActive®.
3D-shape analysis with SensActive®.
Picks unsorted components directly from transport bins, pallets or counters.
Can negotiate both half and whole pallets.
Can even scan directly on a conveyor belt.
Not disturbed by ambient light.
Can analyze complex shapes and is height-independent.
Requires only a 3D-CAD model of the object, which we can help you construct.
Saves space and requires small floor space.
Is noiseless.
Allows advanced pattern laying directly onto pallets thanks to full object control.
Can be installed quickly, even in mobile settings.
Handles most materials, such as steel, plastic, castings and forgings, problem-free. | | |
|
|
|
|
DuPont Performance Coatings GmbH & Co. KG
|
|
 |
Coresheet Varnishes.
The family of VOLTATEX® products offers a comprehensive range of core sheet varnishes with well defined characterictics
| | |
 |
Impregnating Resins
Impregnating Resins | | |
 |
Wire Enamels
Wire enamels from DuPont™ Herberts® Electro cover the complete spectrum of product requirements.
| | |
|
|
|
|
DUO PLAST AG
|
|
 |
3PLUS - agriculture stretch
an proved top-class agriculture stretch film
3-layered, co-extruded, blown guarantee film, free of regenerates
extremely good tensile strength, best strength to piercing
dyed with best possible covering
excellent film bond, sure adhering of film end
smooth outside for problem-free transport of bales
free of chemical glue additions
100% polyethylene
food safe
No telescoping!
No impurity of the pull drums!
No outlet of glue on the edges!
The roll can be used until its end
The Film comes off easily from the roll, as the adhesive are only activated when pulled forward
high longitudinal extension– a profit in fertility
| | |
 |
Carrier Bags
Carrier bags from DUO PLAST – high quality, multiple-use advertising medium!!!
Individually matched for your needs!
Advertising effect with up to 8 colours
Also available high quality half tone printing
| | |
 |
DuoAir perforated stretch
DuoAir – perforated stretch film: the problem solver for you! No matter, which field of application:
biological products
hot palletized products
deep-frozen products | | |
 |
DuoStrap Bundlingfilm
Material:
transparent
slightly stretchable LDPE-film with defined reset force
free from any impurities
environment friendly
recyclable without any problems
absolutely food safe | | |
 |
DuoStretch pre-stretched film
Duo Stretch – pre-stretched film from DUO PLAST, manufactured out of DUOLEN stretch film.
This innovative product provides better features then any other on the market. Give it a try!! | | |
 |
Packaging materials
Cover sheets
Film packaging machines
Film packagings
Packaging films
Packaging materials
Packaging technology
Strapping machines | | |
 |
Sacks
With DUO PLAST you definitely sack things right, e.g. with
Flat- and side gusseted sacks
Valve sacks
Garbage sacks | | |
 |
TerraWrap BigBale(R) film
TerraWrap – DUO PLAST’s BigBale® film!
Produced after a patented manufacturing process | | |
|
|
|
|
Dr. MÜLLER DIAMANTMETALL AG
|
|
 |
Diamond and CBN grinding wheels
Diamond and CBN grinding wheels | | |
 |
Diamond and CBN internal grinding wheels
Diamond and CBN internal grinding wheels | | |
 |
Diamond and CBN tools for the wood and plastic processing industry
tools for the wood and plastic processing industry | | |
|
|
|
|
DRAKE MANUFACTURING
|
|
 |
Ballscrew Grinders
Drake GS:TE (Grinding System: Thread External)
2 & 3-Meter ballscrew grinders are built on proven, time-tested platforms equipped with our most advanced grinding technologies and will arrive programmed to run your specific parts.
They are the the ideal grinders for ballscrews, lead screws, feed screws, multi-start threads and complex geometries.
| | |
 |
Control System Renewals Services
1/2 the cost of a remanufacture; 1/3 the cost of a new machine.
Drake's new CS:R system is ideal for N/C or CNC cylindrical, surface, universal, thread, internal and external grinders as well as hobbers.
The system gives you unmatched control, reliability, productivity, easier set-up and quicker changeover.
| | |
 |
Gear Making
Drake GS:G2-LM (Grinding System: Rough & Finish) rough and finish grind gears one operation. The GS:G2-LM will grind precut gears from Mod 0.5 to 8 (50 to 3 DP), from 1.0” to 10” pitch diameter to AGMA 12 specification. This 2-in-1 highly productive grinder is based on a proven design with added HP and the latest Drake grinding technologies. | | |
 |
GSTE External Thread Grinder
Drake GS:TE (Grinding System: Thread External) machines grind threads for taps, power and steering worms, lead screws and feed screws, ball screws, medical screws, complex geometries and multiple leads aggressively and accurately ... with size control to ± 0.000,2".
Drake GS:TE Grinders give you the control to increase productivity with precision, shift after shift, week after week. | | |
 |
GSTE-LM2_Grinding System Thread Internal-External – Linear Motor
DRAKE’S GS:TE-LM2 (Grinding System: Thread External/Internal-Linear Motor) Now there’s a larger cousin to the GS:TE-LM linear motor grinder! The Drake GS:T-LM2, is available with a work envelope of 350mm diameter with lengths up to 2 meters. It can be equipped with a power wheel helix (A-axis) and for grinding external (±35° lead angle) and internal threads (±10° lead angle), right or left hand. This new grinder will enable us to serve a wider range of customers – especially those producing larger gears and worms, and longer lead, feed and ball screws | | |
 |
Power & E-Steering Systems_Application Solution
Drake offers a variety of internal/external grinding and rack
milling machines for each major component in modern steering systems. Our machines fit easily into a cell environment and can be equipped with our latest automation packages | | |
|
|
|
|
DREISTERN GmbH & Co. KG
|
|
 |
Cut-off machine
High performance cut-off units
You will obtain from us the most suitable cut-off units according to the profile or tubing form, material and line speeds.
Special merits: Outstanding cut-off quality and high cutting speeds. | | |
 |
Electrical Controls
Dreistern has developed a start-of-the-art control system for its line of rollforming and flying cut-off machines.
Special features:
Simplest touch-screen-operation
Complex production lines operated an monitored from central operating station
Capacity for up to 1000 different length and punch-programs
Just-in-time "main-frame controlled" production optional
Operating status and error messages clearly displayed
| | |
 |
Flying cut-off machines
You cannot afford to risk any cut-off compromise? DREISTERN cut-off machines operate with every type of cutting process. Whether you wish to use saw units, shear units or punch units, you simply exchange the cut-off unit and you immediately have the ideal cutting process at your disposal. It is not important whether you require fixed tube or profile lengths or frequently changing lengths.
You will certainly appreciate the high cut-off precision. You will discover one particular characteristic after many years. DREISTERN machines never seem to age. They are designed and built to endure many years of hard work.
High performance cut-off units
You will obtain from us the most suitable cut-off units according to the profile or tubing form, material and line speeds.
Special merits: Outstanding cut-off quality and high cutting speeds.
A couple of examples to show how smart solutions can help to make your rollforming machine or tube mill even more economical:
| | |
 |
High-Speed profile cut-off machine with synchronous linear motor
The TK 123.20 LA is designed for a flying operation in rollforming and tube welding installations with high rollforming speed or high part output. It is especially suitable for cutting small and thin-walled profiles and tubes with particular cutting quality. It achieves for example a speed of 200 m/min cutting aluminium window spacer bar profiles. Cutting short profiles a part output up to 100 parts per minute and more can be reached. The machine is also suitable for punching of profiles in flying operation. Cutting and punching can be done in combined or single mode. | | |
 |
Roll forming machine for medium size to heavy profiles
The P3 series has a eminant reputation among DREISTERN customers. The five models in the P3 series offer outstanding cost-effectiveness. Thanks to the numerous equipment variations, the right solution can be found for each requirement. According to the tooling changeover frequency, a suitable quick changeover system is put into action. | | |
 |
Roll forming machine for open profiles
The P3 series has a eminant reputation among DREISTERN customers. The five models in the P3 series offer outstanding cost-effectiveness. Thanks to the numerous equipment variations, the right solution can be found for each requirement. According to the tooling changeover frequency, a suitable quick changeover system is put into action. | | |
 |
Roll forming machine for thin-walled precision profiles
Frequent profile changeovers while maintaining the same high profile quality?
This is no problem for a P60/90. Thanks to a compact quick-change stand system, a tooling change can be carried out quickly. A precisely adjusted tooling stand is available for each particular profile. The advantage: No adjustments need to be carried out after tooling change. This type of machine is particularly popular with foam-filled roller shutter manufacturers, who appreciate the same high quality offered by this machine - even for difficult profile forms. | | |
 |
Roll tooling
Roll tooling is crucial to each profile machine. The success or failure of every rollforming machine depends on the quality of the rollforming tools. That is why we always pay such careful consideration to them right from the start when advising our customers. Our technicians offer their support as from the development stages. The customers are advised on the suitability of materials. The producibility of profile shapes is verified and the required tolerances are checked. Complex profile shapes and exacting tolerances are our specialty. All this has not happened by chance.
All of our specialists had to undergo a lengthy training period before they were allowed to work on their first project. Something else that distinguishes us from the others is that DREISTERN roll tooling is tested and ready for production upon delivery. The fact that we have our own testing machines is to your advantage: You can already produce while others are still experimenting. | | |
|
|
|
|
Dropsa Spa
|
|
 |
Air /oil lubrication unit for spindle
Oil lubrication is a relatively new emergent lubrication system. The recent developments in lubricant technology have expanded air/oil lubrication to dry machining applications.
The air stream, that normally operates continuously, provides both a transport for the oil to the lubrication point and cooling.
The oil-injected into the air stream at regular intervals coats the surfaces to be lubricated and reduces friction and wear.
Dropsa offers many articulated solutions to Air/Oil Lubrication - the VIP4 Family of products is the latest addiction to this range. | | |
 |
Dry machining and tool lubrication unit
Used in a large range of application, total loss oil lubrication involves creating a thin oil-film between moving parts which is renewed at regular intervals by an automated lubrication system.
Dropsa has developed a wide range of standard electric, pneumatic and hydraulic pump packages suitable for oil loss systems. A custom service design is available to tailor pump packages to specific customer applications.
| | |
 |
Dual Line 02 System
Found traditionally on more complex heavy industrial machinery such as steel plants, the key characteristics of the Dual Line System are simplicity and reliability particularly in harsh environmental conditions. In the event of one lubrication point becoming blocked or failing, the remainder of the system is not affected and continues working without problems. Dual Line Systems often can exceed 60 meters in length.
The large section of pump packages together with many custom design options allows any grease lubrication to be developed reliably and cost-effectively. | | |
 |
Electric oil/grease lubrication pump Dropsa
Dropsa has developed a wide range of standard electric, pneumatic and hydraulic pump packages suitable for oil loss systems. A custom service design is available to tailor pump packages to specific customer applications.
| | |
 |
Flowmaster
The Flowmaster is a volumetric flow device which provides a constant positive feedback. Being volumetric the measurements are independent of temperature or viscosity ensuring accurate reading without the need for calibration or compensation.
Optionally the Flowmaster has a servomotor module that allows automatic closed-loop adjustment of the flow based on operating parameters. | | |
 |
Pneumatic grease pump
wide field of application ranging from small machines such as woodworking machinery to large heavy industry such as steel plants or paper mills.
Dropsa provides an extensive line of equipment for grease lubrication and system monitoring. The most popular systems used for grease lubrication are Dual Line and Progressive Divider.
The modular design pioneered by Dropsa allows easy configuration and expandability of the system. Active components can be substituted during maintenance without the need to disrupt the interconnecting pipe-work. | | |
 |
VIP4Chain - Conveyor and chain Lubrication
A variant of the VIP4Air, specifically aimed at chain or conveyor application can be used on any application where the lubrication cycle is not time-driven but impulse driven.
On a typical chain application, a sensor connected to the Vip4Chain monitors the number or links passing across the lubrication nozzle and fires a micro quantity of oil onto the point increasing chain or conveyor life without lubricant wastage that often can drip off the chain and contaminate the industrial process. | | |
 |
VIP4Tools - Dry Machining and Tool Lubrication
A simple yet effective system without the need for electronic monitoring. It is ideal for dry machining applications such as milling, drilling, tapping and sawing
Either a Solenoid or Pneumatic timer kit can be used to set the time interval between lubrication cycles. On this system, manually adjustable micro-pumps are used. This allows the user to individually set each point from 0 - 30 mm2 per cycle | | |
|
|
|
|
Duall Division
|
|
 |
Dust collector
Dust collector
| | |
 |
Fume and gas wet scrubber
Fume and gas wet scrubber
| | |
 |
Odor scrubbing system
Odor scrubbing system
| | |
 |
Oil mist eliminator
Oil mist eliminator
| | |
|
|
|
|
DUCON TECHNOLOGIES INC.
|
|
 |
Activated carbon air filter
Activated Carbon Filter
Ducon Carbon Absorbers are custom designed to remove odor-causing components such as hydrogen sulfide, mercaptans, organic acids, aldeheydes, and ketones in various industrial and municipal applications. Single bed units are available for capacities up to 10,000 acfm. Dual bed units are utilized for higher capacities
| | |
 |
FCC Cyclones For Refineries
Available in several design configurations,
Ducon Cyclones, (Duclones) achieve over
99.9% efficiency on particles down to 10 microns. Custom designed high efficiency Duclones are also available for unusual service conditions.
FCC Cyclones For Refineries
High efficiency cyclones for FCC processes of: UOP, EXXON, ABB, KELLOG, STONE & WEBSTER, TEXACO, FOSTER WHEELER AND OTHERS
Collection Efficiency maximized
Leading supplier of FCC catalyst recovery cyclones since 1950's.
Reactor, Regenerator and Tertiary vessel primary & secondary cyclones
Complete Reactor, Regenerator and Tertiary Plenums designed and vessels fabricated
FCC Flue Gas Cleaning Systems for removing Sulfur dioxide and Particulate
Advantages
99.9% efficiency for 5 micron size and over particles
Design selection optimized
High efficiency at low pressure drops
Compact assembly
Multiple units with various layouts available
Wide variety of construction materials
Single or multiple layer refractory lining
| | |
 |
VOC ( volatile organic compound) treatment system
VOC Control Systems
Ducon supplies a complete line of VOC emissions control and solvent recovery systems. Ducon specializes in Activated Carbon DUVOC Adsorption Systems to remove/recover organic compounds and exhausts from chemical processing, coating, printing, electronics, metal cleaning and other operations.
Ducon offers modular systems from 500 CFM to 500,000 CFM. Ducon's CACR type and CASR type DUVOC systems are used to remove/recover the following compounds:
Benzene, Toluene, Xylene, Ketones, Alcohols, Phenols, Aliphatic, Aromatic and Halogenated organic Compounds, Esters, and other organics.
For highly concentrated streams Ducon provides catalyst based incineration systems. Please consult a Ducon engineer for your particular requirement.
| | |
 |
Wet and dry electrostatic precipitator
Wet Electrostatic Precipitators
Designed to achieve zero opacity and over 99.9% removal efficiency on particles down to 0.01 micron in size with 0.5 w.c. pressure drop.
Ducon also provides condensing type units for control of metal oxides.
| | |
 |
Wet Electrostatic Precipitators
Wet Electrostatic Precipitators
This Ducon Wet Electrostatic Precipitator unit is designed to achieve zero opacity and over 99.9% removal efficiency on particles down to 0.01 micron in size with 0.5 w.c. pressure drop. Ducon also provides condensing type units for control of metal oxides.
Advantages
Non-clogging due to widely spaced electrodes
Simple |
| |
