|
|
|
Z-LASER Optoelektronik GmbH
|
|
 |
LP CUBE laser projector
Especially for the projection of simple contours (21 lines or 5 objects)
Red laser source
Upgradable to full projector
Fan angle up to 80° by 80°
serial or Ethernet data transfer
Air cooled housing
Optional: Active air cooling | | |
 |
ZB Imaging
Smallest line laser (40° fan angle, equal light distribution along the line)
Smallest hand focusable dot laser | | |
 |
ZD - The Mini
Universal mini laser module for line, cross and dot projection
Output power / Wavelength: 1 - 15 mW/635nm +/-10 nm (other wavelength upon request)
Dimensions: Ø 11 x 52 mm
Input voltage: 4 - 6 VDC (option: 24VDC)
Laser driver: APC with current limiter, reverse polarity protection | | |
 |
ZT - The Flexible
Laser with exchangeable optics: dot, line, line-point, small cross, large cross
Output power / Wavelength: 1 to 10 mW, 635 nm or 650 nm +/- 10 nm
Adjustable light intensity
Dimensions: Ø 14 x 69 mm
Operating voltage: 3,5 - 5,5 VDC
Laser driver: APC with current limiter and external intensity control, reverse polaty protection | | |
|
|
|
|
Zollern GmbH & Co. KG
|
|
 |
foundry castings
foundry castings | | |
 |
foundry castings
foundry castings | | |
|
|
|
|
Zirox Sensoren & Elektronik GmbH
|
|
 |
sensors
sensors | | |
 |
CO2-Sensor
Room air monitoring
Control of biological and technical processes
Application for operational safety | | |
 |
High-Precision Oxygen measuring Device SGM5
Precision measuring device for the determination of oxygen traces in gases | | |
 |
O2-Measuring Device SGM7
Compact measuring device for the determination of oxygen residues | | |
|
|
|
|
Zip-Pak
|
|
 |
3- or 4-Side Seal
Pouch features full-panel graphics on front and rear
More available area to promote product, benefits
No rear fin-seal to split rear panel text messages
Zipper located on short or long side
Often used for: produce, confections, rice, popcorn, IQF poultry and frozen vegetables
Equipment options-can be produced on Horizontal or Vertical/Form/Fill/Seal or Pre-made Pouch machines | | |
 |
Pillow Pouch
Package features a 'fin seal' down back of package
Zipper located on long or short side of package
Can be produced in wide range of sizes
Often used for: cereal, produce, and salty snacks
Equipment options-Vertical/Form/Fill/Seal machines or Horizontal Flow-Wrappers | | |
 |
Stand-up/Block-Bottom Pouch
Stand-up/Block-Bottom Pouch
Pouch has a flat bottom, with gussets
Zipper located at top of package
Often used for: cookies, pet foods, confections, and snacks
Equipment options-produced on Horizontal or Vertical/Form/Fill/Seal or Pre-made Pouch machines | | |
|
|
|
|
ZINSER Schweisstechnik GmbH
|
|
 |
Flame cutting machines
ZINSER Schweisstechnik is one of the leading manufacturers worldwide for flame cutting machines. The well proved manually driven flame cutting and pipe cutting devices as well as flame cutting machines for every use belong to the wide product range.
The variety of machines does include simple and robust flame cutting machines with optical tracers as well as modern CNC-controlled machines for oxyfuel, plasma or waterjet cutting.
Programming systems for the creation of NC-programs are the interface between CAD
and production.
ZINSER Schweisstechnik does deliver worldwide.
| | |
 |
The pipe cutting devices
Portable flame cutting technology from ZINSER
for simultaneous cutting and chamfering of steel pipes
ZINSER pipe cutting devices (RSV-0, 1, 2, 3)
The pipe cutting devices are designed to be fitted onto an endless pipe.
With the fast clamping device the pipe cutting device can be clamped at any position on the pipe.
The movement around the pipe is achieved by the means of 2 hand cranks and 4 wheels. The hand cranks are fitted for the operator not to have to change his position when the pipe is being cut. The cutting torch can be swivelled by ± 45° and is equipped with a horizontal and vertical adjustment (2 coordinates slide).
Instead of the manual drive by means of hand cranks an electric drive with spur gear and infinitely variable speed control is also available.
| | |
 |
ZINSER 2315/2325 - gantry machine for plasma and oxy-fuel cutting
With this New Cutting Machinery Generation, requirements of our customers became consequently realized.
The special advantages of the machines are as follows:
- extraordinary robust design, linked with a high stiffness
- precise linear guides on the gantry bridge
- heavy duty runway, based on milled railway profiles S49
- excellent and powerfull digitally controlled AC-drive system with
high precision planetary gears
- selected racks
By use of a wide number of tools and additional components customer requirements become fulfilled most favourable.
The ZINSER 2315/2325 is available in track widths up to 3.6m and up to 4 torch carriers can be combined with the machine.
Basic equipment of the machine - ready to cut:
- CNC-controller attached version (stand alone version on request)
- Three-hose machine torch for up to 200mm material thickness
- Cutting speed up to 6 000mm/min
- Positioning speed up to 15 000mm/min
Additional Components
- Hole piercing unit with fast preheating by means of proportional valves,
central gas supply included
- Electric torch ignition device
- Motorized and capacitive torch adjustment
- Additional machine cutting torches
- Plasma power sources
- Plasma interlock and dialog system
- Drawing unit (ZINSER-2325)
- Marking unit
| | |
 |
ZINSER 2425 A flexible machine for high standards
With the development of this new generation of cutting machines the already high standard of the forerunners could be increased further. The use of an extended cross drive increases significantly the rigidity of the . The overall extraordinary robust construction, precise linear guides of the gantry bridge and a heavy duty runway based on milled railway profiles S 49 guarantee very best quality and a long duration of life.
Excellent and powerful digitally controlled AC-drive systems with high precision planetary gears as well as selected racks give the excellent motion characteristics, even at higher speeds and shift in direction. The result of all these features is an outstanding quality of cut.
| | |
|
|
|
|
Zinner GmbH Präzisionswerkzeuge
|
|
 |
Boring tools
Boring tools | | |
 |
Carbide drills
Carbide drills | | |
 |
Chip removing tools
Chip removing tools | | |
 |
End mills
End mills. | | |
 |
Lathe tools
Lathe tools. | | |
 |
Surface milling cutters
Surface milling cutters. | | |
|
|
|
|
ZIMMER + KREIM GmbH & Co. KG
|
|
 |
Genius 1000
genius 1000 – The Cube
stable, precise, large surface | | |
 |
genius 1700 – powerful, accessible, warp resistant
machines for demanding tasks: genius 1200 and genius 1700. They have both been built with a portal structure. Their rigid casings allow for highly precise operations even with very heavy work pieces. They come with simultaneously running drive trains, each equipped with measuring systems for the portal of the X-axis. Their advantage: They can handle bigger electrode dimensions as well as smaller sections of larger work pieces.
In their respective classes, genius 1200 and genius 1700 range within the most space saving machines and they combine a clear-cut design with maximum stability.
Both machines are equipped with a 5-axes CNC controller. They are suited for manual operation and for working with any of our handling-systems.
Within our product range, genius 1700 offers the largest table and the highest travel lengths. It is mainly employed in large-mold construction: in processing the largest work pieces it realizes a degree of precision that can otherwise only be achieved with smaller machines.
You want more information about the genius 1700 series? Just send a request to our marketing team.
| | |
 |
genius 700 – fast, powerful, all-purpose
Step into a new dimension of cavity sinking with genius 700. With high processing speed and reduced non-productive times it guarantees you the shortest possible job processing. The table / travel length ratio is currently unsurpassed in the market – the size of the table is used to its full capacity. And genius 700 enables you to enter the world of automation anytime and on a grand scale: it is especially adapted for working together with the Eagle changer or our Chameleon handling-system.
genius 700 offers by far the greatest clearance between dielectric fluid and the table in its class, thus giving you yet another advantage in terms
of flexibility. In addition, we have facilitated
and accelerated the tracking of the dielectric fluid inside a reservoir that is infinitely adjustable.
There is no need to worry about size, height or difficult tasks anymore: with genius 700 you can process a great bandwidth of work pieces. Thanks to
its rigid construction, the moment of inertia of the C-axis equals 0.6 kgm2 and is thus significantly higher than that of all similar cavity sinking machines on the market. And that is how you can carry out even difficult cavity sinking processes
with maximum precision.
genius 700 has an rigid casting with pre-stressed rolling contact guides. The generator is integrated into the machine, effecting more clarity and less susceptibility to failure. The filter can be changed “on-the-fly.” All in all the features of genius 700 add up to a higher rate of operational availability.
You want more information about the genius 700 series? Just send a request to our marketing team.
| | |
 |
The handling-system Chameleon – modular, linear, fully automated
You are looking for a trendsetting solution to ensure a safe, automated production process? We are offering Chameleon: the automation system that combines unrivalled adaptability and versatility with a reliable mounting process even when working with a variety of different types of machines. Chameleon will grow indefinitely with your demands and it will continue to handle several machines simultaneously.
Chameleon is a handling-system that can be used universally, being suited for work pieces, electrodes and milling-tools. It is a stand-alone solution with open interfaces that can be employed in any periphery – independent of Zimmer&Kreim machines.
Chameleon works in a technology-spanning way:
All other machines that are part of your production process – e.g. milling or wire-cutting machines – can be integrated into the handling-system effortlessly. The different grippers – e.g. electrode grippers, milling grippers or pallet grippers – are operated by its control unit.
Quality assurance and an increased flow-rate – these are the benefits in money's worth that Chameleon obtains in your production line: because Chameleon offers a fully automated identification system that quickly implements the changing process and thus significantly reduces changing times in permanent operation.
Chameleon quickly mounts machines flexibly, i.e. horizontally or vertically, even during the work process, and thus facilitates stacking and sorting. And this gives you the advantage of shorter cycle times and improved adherence to delivery dates.
You want more information about Chameleon? Just send a request to our marketing team.
| | |
|
|
|
|
ZIEMANN Ludwigsburg GmbH
|
|
 |
Brewhouse plants
The ZIEMANN brewhouse: Designed according to the customer’s wish. Tailored to meet the demand of the brewery. Perfectly manufactured for the highest beer quality. Efficient operation for high returns.
The brewhouse standard at ZIEMANN: Maximum wort quality and at the same time increased brew frequencies with reduced use of water and energy for efficient, economical production. Based on worldwide practice and own research and development work, ZIEMANN boasts a unique pool of experience and know-how in brewing techniques and brewing technology. This pool enables ZIEMANN planning engineers and designers to provide the brewery management with competent advice and to implement the given specifications on a tailor-made basis. This applies to the new construction or the conversion of a brewhouse, as well as to any process optimization. The production block of the brewery is made in the high-tech factories of the ZIEMANN GROUP. A whole range of reference projects across the globe speak for ZIEMANN. Drop in and visit one near to you. We can make the appropriate arrangements. | | |
 |
ZIEMANN Cold block
The cold block sector is decisive for the quality of the beer. With its highly developed tank engineering technology this is yet another field where the ZIEMANN GROUP ranks top of the international league.
Taking the actual situation of the individual brewery into account, ZIEMANN design engineers coordinate the design, technology and version of the yeast storage, fermentation and storage cellar. Many different factors in the cold block are decisive for the economic efficiency and quality of the beer production. The ZIEMANN+BAUER bright beer tank cellar with its complex pipework, valves and control engineering makes up the most important part of the cold block. | | |
 |
ZIEMANN Energy block
Beer production requires different forms of energy as heat, steam, electricity. ZIEMANN implements the project planning, design and delivery of the entire power supply for the brewery, regardless of where it is to be.
ZIEMANN sets up brewing plants all over the world and is familiar with having to face many different situations and stipulations. This has led to a well-established and comprehensive knowledge of solution possibilities. All local conditions and frameworks set by authorities are, of course, already taken into account during the design and the planning phase. Wherever possible and necessary, a cooperation is planned with local partners already in the general engineering. In this respect, the on-site manufacturing of parts is also included | | |
 |
ZIEMANN Process automation
ZIEMANN was one of the world’s first companies in the sector to implement the complete process automation at the customer location. Experience, innovative drive and quality without compromise guarantee that ZIEMANN customers will continue to produce beer in fully automatic or semi-automatic operation at a consistent high quality, cost effectively and in an environmentally sustainable manner.
As pioneer of brewhouse automation ZIEMANN, together with its technology partner SIEMENS, continues to boast outstanding competence in process automation control and monitoring. The »BRAUMAT« system used by ZIEMANN has proven its worth for over 20 years. It ensures the maximum level of reliability while maintaining maximum flexibility, and permits continuous further development and adjustment to future requirements. A clear and logically designed menu management makes it easy to work with. The major control functions and parameters are clearly laid out and documented. All supplements and further developments such as the plant control with artificial neural networks - artificial intelligence - are designed in such a way that the existing system can be upgraded without difficulty. | | |
|
|
|
|
Zico Zimmermann GmbH & CO. KG
|
|
 |
Distance Rings
Standard steel and stainless - INOX | | |
 |
mincer plates and-knives
mincer plates and-knives | | |
 |
separating-set
separating-set | | |
 |
Seydelmann
Seydelmann | | |
|
|
|
|
ZF Friedrichshafen AG
|
|
 |
Diesel lift-trucks
Highest Precision. With intelligent Driveline Systems.
Material handling vehicles with combustion engines are real "all-rounders". In outdoor application, for example, they must be able to quickly transport extremely heavy loads over long distances
| | |
 |
Electrically driven lift-trucks
Optimum Productivity. With pre-finished System Solutions.
Drive systems for electrically driven lift-trucks of up to 6 tons lifting capacity are distributed under the name ZF-ERGOMAT
| | |
 |
System enlargement
Thinking Forward. With new Driveline Systems.
As the world's largest independent manufacturer specializing in driveline and chassis systems, ZF always comes up with new technology trends. ZF's innovations extend from the component to the complete drive system
| | |
|
|
|
|
Zeropack Co., Ltd.
|
|
 |
FILM tray p.e bag
- Adjustable length from 265mm to185mm
- Permanent use
- No twisted after applying
| | |
 |
Roll : 11" roll / 8" roll
Roll : 11" roll / 8" roll
for longer food preservation with low oxygen permeability.
Environment friendly barrier materials;
| | |
 |
vacuum sealer
vacuum sealer
Vacuum-packing is a process of removing air inside a bag and sealing it to prevent air from going back in.
It is a economical way of storing food that blocks air, micro-organisms and bacteria. It prevents decaying and discoloration of food, keeping it fresh for as much as to 2 to 3 times longer.
| | |
 |
Vacuum Sealer 200
Vacuum-packing is a process of removing air inside a bag and sealing it to prevent air from going back in.
It is a economical way of storing food that blocks air, micro-organisms and bacteria. It prevents decaying and discoloration of food, keeping it fresh for as much as to 2 to 3 times longer.
| | |
|
|
|
|
Zellwag AG
|
|
 |
de-stacking systems
de-stacking systems | | |
 |
filling and capping machine
filling and capping machine | | |
|
|
|
|
Zeller + Gmelin GmbH & Co. KG
|
|
 |
Calibration lubricants
Calibration lubricants for series parts in the area of powder metallurgy
We offer advantages:
Good lubricating and separating effect
Increasing of the serviceable life of the tool (die)
Easily removable
Environment-friendly and safe for the skin
Suitable for spray application
Good protection against corrosion | | |
 |
Dry offset printing on containers
Dry offset printing on containers is just one of the numerous services provided by Zeller+Gmelin. | | |
 |
Extrusion oils
Extrusion oils for cold massive metal forming for all materials.
Specially designed for use in modern fast running machines
Special products for highly alloyed steels and difficult geometries
Your advantages:
can be used on single-stage and multi-stage presses
lubrication: good EP-properties, high pressure absorption capacity
high temperature stability
easy application, good adhesion
good degreasing after processing
compatible with surface coatings and follow-up operations
protection against corrosion
environmentally friendly | | |
 |
Industrial lubricants
Zeller+Gmelin is a specialist for industrial lubricants and offers products and solutions for the most diverse areas of use.
Specialists such as Zeller+Gmelin can react flexibly and with a high degree of professional proficiency to specific customer wishes offering complete packages for the highest requirements. This leads to success even in the tough industrial lubricants market.
We produce more than 700 high-performance lubricants at our own production site. These are summarised in the product groups below:
| | |
|
|
|
|
Zayer S.A
|
|
 |
CNC MILLING MACHINE AND MACHINING CENTERS
Bridge type | | |
 |
CNC MILLING MACHINE AND MACHINING CENTERS
moving column type | | |
 |
CNC MILLING MACHINE AND MACHINING CENTERS_BED TYPE
BED TYPE | | |
|
|
|
|
ZAUGG AG EGGIWIL
|
|
 |
Airport-snow plough SP 3000
The Zaugg airport snow plough SP 3000 is available in 6 m and 7,5 m wide. It is characterised by an especially simple construction and a particularly low weight.
The 6 m wide model for example weights less than 1600 kg. Its cross-section is designed in such a way that it always adapts optimally to the road-surface. Besides it has a snow shield that still functions at high clearing speed. Of course it is also equipped with the approved trip edge system operating on two rubber-sprung elements (only available at ZAUGG), which protects the plough and the vehicle against damages even at high clearing speed, this in particular thanks to its small measures.
| | |
 |
Ice mill EG 20 Vario
The ZAUGG Ice mills are designed for use on highly iced roads, pavements and open lots. They easily cut their way through up to 10 cm thick ice layers, or can be used to roughen up iced areas making them passable.
The cutting width is variable and can be adjusted.
| | |
 |
Mower MG 130
to mow green areas between crash barriers and mileposts.
Description:
Steady tubular construction, mounting on VSS-A-plate, actuated by power take-off shaft or hydraulic system (min. 110 l/min. at 180 bars), mowing plate driven by toothed belts, good visibility in working and travelling position, controlled by proportional valve with 2 Joysticks, economic cutting knife, change-over system for right or left travelling gear, excellent mowing capacity at average motor speed, low-noise and few fuel consumption.
Hydraulic adjustment: traversing 60 cm, height 65 cm, lateral inclination, spreading of mowing plates, single-operator control.
| | |
 |
Rail snow plough
Projects realized by ZAUGG AG EGGIWIL:
Bex-Villars-Bretaye CH
| | |
 |
Snow blower SF 110
The ZAUGG SF 110 is designed for mounting on large vehicles, tractors, Unimogs and loaders with 60 kW output or more. Clearing width up to 260 cm. | | |
 |
snow blowers
Crawler type snow blowers. | | |
|
|
|
|
ZANDER Aufbereitungstechnik GmbH
|
|
 |
Activated charcoal adsorption unit
High efficient activated charcoal adsorption purifier series AKM / AKN
Oil vapour adsorption from compressed air and gases.
Oil aerosols down to a particle size of 0,01 micron can be removed by a ZANDER X grade Microfilter. Modern industry and process plants need compressed air free of oil vapour, which can only be removed effectively by a ZANDER oil vapour adsorber. Design and Operation:The ZANDER AKN activated carbon adsorber is filled with a special grade of activated carbon*1 for the removal of oil vapour from the top to bottom of the vessel. Thanks to an optimum contact time, velocity, bed depth and quality of activated carbon, the remaining oil content is reduced to 0,003 mg/m3. The quality of the air can be monitored by the oil indicator, which is fitted as standard. Experience has shown that a carbon life of 10,000 hours can be achieved, when a ZANDER X grade Microfilter is fitted up-stream. The exact life of the carbon depends on efficiency of the compressor, the type of oil used and the relative humidity of the compressed air.
Capacity from 8 m³/h up to 6100 m³/h, referred to 1 bar and 20° C. Residual oil content: up to 0.003 mg/3. Paint compatible units available!!!
www.zander.de | | |
 |
Compressed-air / technical-gas microfilter
liquid (e.g. water or oil) and solid
particles down to 1µ from compressed air and gases.
Efficiency at normal capacity: 99,9999% (1µ).
Residual oil content: ≤ 0,5 mg/m3 (1 bar (abs.), 20°C).
Recommended temperature range: 1,5°C - 80°C.
Standard equipment: Complete filter including automatic condensate drain.
CE mark in accordance with the Pressure Equipment Directive97/23/EC (PED) for Fluid Group 2. No CE mark is authorised under Article 3 paragraph 3 for smaller filters or CE mark in accordance with Article 1 paragraph 3.3.
Filters suitable for Fluid Group 1 see page 20.
As an option available DELTATRONIC filter monitoring. Real messurement of filter status incl. software to minimize the operating cost in relation to the differential pressure of each Filter.
Also available:
-Paint compatible filters
-High pressure filters (up to 350 bar ü / 5000 psig)
-Stainless steal filters
-Vent filters
-Filter silencer
-Activated charcoal filter elements
-Sterile- and steam filters
-Filter elements for competitor housings | | |
 |
Condensate drain
Pressure up to 16 bar, temp. range: 1 - 60°C
C A P A C I T Y
Model compressor refrigeration Filter Connection
aftercoooler dryer
ED2002 --- --- 720m³/h G 3/8
ED3004 240 m³/h 480 m³/h 2,400 m³/h 1 x G 1/3, G 1/8
ED3007 420 m³/h 840 m³/h 4,200 m³/h 2 x G 1/2, G 1/8
ED3030 1,800 m³/h 3,600 m³/h 18,000 m³/h 2 x G 1/2, G 1/8
ED3100 6,000 m³/h 12,000 m³/h 60,000 m³/h 2 x G 1/2, G 1/8
Standard version with BSP thread (G) for 230V/50 - 60Hz supply voltage. Alternatively versions NPT thread (N) or 115V/50 - 60Hz or 24V/50 - 60Hz available. 24V DC on request
ecodrain 2000, for pressure up to 50 bar, temp. range 1 - 60°C, intern. heater available!
C a p a c i t y
Model Compressor Refrigeration Filter 2* Connections
aftercooler dryer
ED2010 1,290 m3/h 2,580 m3/h 12,900 m3/h 2 x G 1/2
ED2020 6,000 m3/h 12,000 m3/h 60,000 m3/h 3 x G 3/4
ED2060 66,000 m3/h 132,000 m3/h 660,000 m3/h 3 x G 3/4 | | |
 |
Oil / water separator
Compressed air condensate generally has far more oil than
20 mg/l content. The user has two possibilities.
Firstly, he can have the condensate taken away by a specialist waste disposal firm at great cost. Alternatively, the user can process the condensate on site by separating the oil and the water, which forms the largest
proportion.
ZANDER’s ecosep S high efficient oil-water separator and
the ecodrain automatic drain, offer compressed air users a
complete condensate management system to achieve an oil content, in water of 10 mg/l or below which can be discharged into the effluent system.
-ecosep SL 1 - SL 60
Separating system for non emulsified compressor condensate. Usable to connect several condensate drain systems. The adsorption charcoal filters adsorb the remaining oil droplets and garant high safety in application.
Standard complete and ready for operation.
Optionally a heater is available | | |
|
|
|
|
ZÁLESÍ, s.r.o.
|
|
 |
Seznam uzávěrů a krčků
Na samotném katalogu zatím pracujeme. Připravujeme prezentaci kompletního sortimentu uzávěrů a krčků s aktivními výkresy a obrazovým přílohami. | | |
 |
ZÁLESÍ, s.r.o.
ZÁLESÍ, s.r.o. | | |
|
|
|
|
Zwick/Roell AG Zwick GmbH & Co KG
|
|
 |
Dynamic and fatigue test system
Vibrophores
For fatigue testing of materials or components by applying sinusoid loads Zwick Vibrophores offer an economical alternative using the resonance principle with constant or variable amplitude and mean load.
The Zwick vibrophores combine a maintenance-free system with maximum testing speed at minimum energy requirements.
The wide range of nominal loads (from 5 to 500 kN) enables the widest variety of dynamic tests according to the resonance principle.
With suitable add-ons, testing can be carried out under different environmental conditions (temperature, aggressive media), or torsion or bending tests can be performed. Testing can be performed either force controlled or strain controlled. And, of course, testXpert® will support you with harmonized standard and master test programs. | | |
 |
Hardness tester Zwick
ZHU2.5/Z2.5 : The most Universal Hardness Tester of the World
The ZHU2.5/Z2.5 is the most versatile all-round hardness tester the world has ever seen. It is based on a materials testing machine type "zwicki": Simply mount the hardness measurement head. The hardness measurement head is constructed so that it can be used with all Zwick materials testing machines, and for automation. Equipped with other tools or grips, this modular test system is also suitable for tensile, compression and flexure tests.
testXpert® is also utilized as the test software. A cost-optimized supplement has been developed solely for optical hardness test methods.
Integrated in the hardness measurement head are a digital travel measurement system, a load cell and an
interchangeable indentor with measurement transducer.
On the whole the hardness measurement head encompasses all hardness tests with indentation depth measurement, e.g. Universal Hardness HU macro range or Martens hardness HM, Rockwell hardness, ball indentation hardness H, Vickers depth measurement HVT, and Brinell depth measurement HBT.
| | |
 |
Materials testing machine
ProLine is a simple and compact test machine that was developed to meet the demand for low-price top-class test machines for functional testing of components and for standard applications on basic materials.
With the ProLine, Zwick Roell meets your demands for fastest delivery times | | |
 |
Pendulum impact tester for plastics Zwick
Zwick offers a wide range of pendulum impact testers for tests according to Charpy, IZOD, Brugger and Dynstat as well as for impact tensile tests. And, of course, we ensure that our machines fulfill the requirements of the relevant test standards such as ASTM E 23, EN 10045, DIN EN ISO 180, ISO 179 or ISO 8256 were fulfilled.
The pendulum impact testers cover a range from 0.5 Joules to 750 Joules. They are available in a variety of models, e.g. for instrumented or non-instrumented tests, with analogue or digital displays and with a range of different options especially geared for your tests. | | |
 |
Tensile-compression testing machine
Allround-Line
The Allround-Line satisfies strictest demands and performs superior test tasks. Add-ons are available and harmonized with the test machines for clear-cut operability. These test machines cover a wide range of applications.
High Capacity Machines
These are static testing machines for load forces up to 2000 kN | | |
 |
Tire inspection machine Zwick
Dynamic Systems Testing
Zwick provides test rigs and portal frames for the dynamic testing of systems components, which are designed in conjunction with your needs. | | |
 |
Universal hardness tester Zwick
This Universal Hardness Tester with its excellent price/performance ratio is used for both: classical hardness tests on metals and for the testing of plastics, in particular.
It works, for example, according to the Rockwell R, L, M, á(alpha) test methods and determines the ball indentation hardness. All conventional optical hardness test methods (Vickers, Brinell, Knoop) and the depth measurement method (Rockwell) can also be carried out in compliance with the standards within a load range from 1 to 250 kg.
The essential features bearing out the quality of the machine are its ease of operation, an outstandingly large test area, the measurement without parallax error (with the lines of measurement being integrated in the ground-glass screen optics), a fully automatic test sequence, and the use of a high-precision closed loop system. Another plus is the extraordinary depth of focus. With the RS232 connection to the test software testXpert®, all tests can be evaluated and documented. For example, data can be transferred to quality assurance systems for further processing.
Customized accessories for a large range of applications are available to the customer.
| | |
 |
universal-testing-machine
Allround-Line
For optimum harmonization with the requirements of your test, the Allround-Line offers a variety of load frames, e.g. table-top or floor machines, with different maximum forces up to 250 kN, various heights and widths, or even with a second test area. And, of course, accessories like safety shields, temperature chambers, and further test equipment are also available in a wide range to meet your particular needs.
The test machines from the Allround-Line can also be operated with or without a PC as desired. The operation with standard PCs (no additional card necessary) and the test software testXpert® offers you the highest operating comfort, efficient data analysis and statistics, and performant networking functionality.
The test machines are all equipped with our proprietary electronics console testControl.
Advantages:
Mechanics, electronics and software as a modular system for customization with our add-ons
Crossheads with uniform mechanical interfaces for shorter re-equipment times, ideal when alternating test types
High crosshead travel and a wide test area
Robust and sturdy industrial drive system
Wide range of test equipment available for a large spectrum of applications
Ergonomic working in a seated or standing position
| | |
|
|
|
|
|
