|
|
|
gwk Gesellschaft Wärme
|
|
 |
Hot applications require perfect solutions
As a rule, gwk temperature controllers that are designed for operation with heat carrying oil are used for circulation temperatures above 200°C
| | |
 |
Model active and moldclean
Safe production with clean water.
Efficient cleaning of polluted circuits.
The gwk active incorporates almost all processes for processing, conditioning and care of top up and circuit water for open and closed heat transfer systems in one appliance. | | |
 |
Model integrat direct
One single turn and you're there.
Safe and reproducible temperature - control processes.
The integrat direct is innovative gwk-technology for cooling, multiple temperature - control and temperature monitoring for plastic processing.
| | |
 |
Temperature Control
Precise and effective temperature management.
Significantly increasing producitvity.
For this trend-setting procedure of dynamic mould cavity temperature-control gwk is using the new integrat evolution from its integrat-family, which is known to be innovative. It uses several integrat components. The technology of the integrat 4D is used for the close-to-cavity arrangement of the temperature-control channels in the mould. The energy-saving, individual regulation of the water-quantity per cooling channel for the cooling stage is done by the integrat direct. The new integrat process control is responsible for communication and regulation between the heating and cooling elements.
| | |
|
|
|
|
Grabher INDOSA AG
|
|
 |
INDOSA-matic 100 proGAS with INDOSA TR2
Automatic Vacuum Can Seaming Machine with integrated Filling Station & Check Weigher | | |
 |
INDOSA-matic 100 with INDOSA TR 2
Automatic Can Seaming Machine with integrated Filling Station & Check Weigher for all Can Types | | |
 |
Membrane Line for Tin Cans
INDOSA TWIN-matic 100 TinMem "Direct Seal" with MST 131 | | |
 |
Milkpowder Filling & Seaming Line
Milkpowder Line for Cleaning, Spoon spending, Filling, Evacuating, Gassing, Seaming, Turning and Capping of Cans | | |
 |
Packaging technologny
machine for heat sealing cardboard | | |
 |
slope conveyor
slope conveyor | | |
|
|
|
|
GPS Perimeter Systems Ltd
|
|
 |
Perimeter Systems Ltd specialise in the provision of security systems for intruder detection in an outdoors environment
Perimeter Systems Ltd specialise in the provision of security systems for intruder detection in an outdoors environment | | |
 |
Buried Detection Systems
The main feature of these types of system is that they are invisible once installed and therefore difficult for an intruder to locate.
They can follow the shape and contours of irregular boundaries and are not constrained to "line of sight" applications. This makes them ideal for irregular shaped sites.
This means that they do not require a specific physical barrier such as a wall or fence
It is essential that they work under many different surfaces such as grass, gravel, asphalt and paving.
We have different systems available to suit different applications (click on the name to see more information): | | |
 |
Fence Mounted and Taut Wire
The main feature of these types of system is that they are simple to install and unobtrusive.
They follow the shape and contours of irregular fence lines and are not constrained to "line of sight" applications. This makes them ideal for irregular shaped sites.
This means that they do, usually, require a specific physical barrier such as a wall or fence, although the Taut Wire systems can form their own physical barrier
It is essential that they work on many different types of structure such as chain link, welded mesh and palisade fencing. The Taut Wire systems must also have a free-standing capability
We have different systems available to suit different applications: | | |
 |
FPS - Fibre-optic Cable Detection System
The FPS detection system is based on a fibre optic cable that has the highest level of detection while at the same time has a very low false alarm rate. It is completely immune to electromagnetic interference generated by fast transients of current /voltage or atmospheric phenomena (lightning).
The system is particularly suited to deployment in the protection of gas, water and oil pipelines where the main pipe is above ground.
The fibre, clipped to the pipe, will detect attempts to drill into or damage the pipe and pass this information back to the processing unit. At least 20km of pipe can be protected in this way using a single fibre.
Principle of Operation
A mechanical disturbance on the fibre (generated by vibration, pressure or movement) changes the light transmission characteristics of the fibre. The changes are very small but using a very accurate light source (such as obtained with a laser diode) and with a very sophisticated amplification and processing system it is possible to generate a voltage signal that is similar to that generated by a microphonic cable (see the CPS Plus perimeter protection system).
The laser diode injects an impulse of coherent light into the optical fibre. This light propagates along the fibre and is reflected from the extreme opposite end of the fibre. An inteferometric analysis between the light transmitted and the light reflected allows the generation of an optical signal that is converted by an opto-electric converter and sent to a processing unit.
The processing unit passes the electrical signal to an analogue bus and generates two synchronisation signals: one to the coherent light generator (laser) and one to the zone processing devices. The zone processors operate in a very similar way to the microphonic cable sensor (CPS Plus) and, like these, are compatible with the COM115 bus, used in the latest generation of perimeter sensors, managed by the UCP2000/MX2000 system.
| | |
|
|
|
|
Goudsmit Magnetics Groep BV
|
|
 |
Coil lifting magnet
LONGITUDINAL ELECTRO LIFTING MAGNETS
These magnets are used to lift bundles of material with an irregular surface, which complicates lifting operations. Longitudinal magnets, however, have a particularly deep penetration field that makes them unsusceptible to such irregularities. This enable safe and effortless transport of bundles of material. Moreover, two or more of these magnets can be used, depending on the length of the bundles. In the event that people are present in the lifting area, however, extra mechanical slings must be fitted for safety purposes.
| | |
 |
Lifting magnet
The use of electro & permanent lifting magnets offers the following advantages:
- Speed, simplicity and the damage-free transport of workpieces of various
shapes and lengths.
- The possibility of precisely positioning the workpiece to be lifted
- Saving valuable storage space and manpower
All magnets can be supplied with electronic control. The control is equipped with an IGBT that switches the current to the magnets. Both voltage and current can be set at, for example, 80-100 and 120% for lifting, transport and compression. | | |
 |
Magnet for recycling
for the removal of iron, steel and non-ferrous items from (recycled) materials, such as household refuse, glass, rubber, timber, coal and building & Demolition waste
| | |
 |
Metal detector
Metal detectors remove ALL metals, also non magnetic such as aluminium, copper, brass, etc; from 0,5 mm
On detection, a signal follows driving a valve or stops the belt Suitable for belt widths up to 2000 mm or free-fall and vacuum or pressure transport.
Electrical current required
Operation by powerful ADM05 touch screen control
Can be used in accordance with ATEX regulations for dust explosion zone 20.
Specific application for metal detectors: recycling, foodstuffs, bulk-handling, pharma and ceramic industries. | | |
|
|
|
|
Goratu Maquinas Herramienta S.A.
|
|
 |
machining centres
machining centres vertical. | | |
 |
milling machines
bed type milling machines | | |
 |
turing horizontal bed lathes
turing horizontal bed lathes | | |
 |
turning slant table lathes
turning slant table lathes | | |
|
|
|
|
Globe Machine Manufacturing
|
|
 |
composite wood&plastic lines
Globe Machine, Burelbach Industries, and Globe International's principal mission is to be a major contributor to process technology, and supplier of machinery and systems to the wood based and mineral bonded panel and plastics industries in North America and International markets. The Materials Handling equipment division is focused on North American markets, providing material handling solutions and systems to all industries. | | |
|
|
|
|
Gleason-Hurth Maschinen und Werkzeuge GmbH
|
|
 |
Bevel Grinding Gear Machines
PHOENIX®II 275G Bevel Gear Grinding Machine
Gleason's latest addition to the PHOENIX®II product line is an advanced Bevel Gear Grinding Machine that utilizes the revolutionary monolithic column design. This concept reduces floor space and significantly reduces cycle times.
The PHOENIX®II 275G Bevel Gear Grinding Machine accommodates gears with up to a 275 mm pitch diameter, but with a machine footprint that measures just 2.3 x 3.4 meters (excluding the filtration unit). This compact design includes a self-contained electrical enclosure and hydraulic unit, helping make installation fast and simple
| | |
 |
Blade Profile Grinding Machine Bevel Cutter Sharpening
BPG
The Gleason Blade Profile Grinder is designed to significantly reduce floor-to-floor times -- and the cost of blade resharpening -- by combining a unique Gleason Quickedge™ grinding process (patent pending) with high-speed, flexible automation. The Quickedge process features faster stock removal rates, while reducing wheel wear. In addition, the process offers fast, highly repeatable results for a wide variety of Gleason and non-Gleason “stick type” blades of high speed steel and carbide materials. Sharpening of all geometries including those with front face sharpening is provided
| | |
 |
Gear Cutting Tools
Cyclocut™
The Gleason Cyclocut™ method was developed with the goal of creating a modern jobbing method which incorporates the advantages of the classic jobbing methods and the advantages of modern high production methods.
The advantages of this new method as opposed to all known older jobbing-processes are many-fold. Lower investment, smaller cutting times, better surface finish and convenient hard finishing are some of the more important advantages.
| | |
 |
Genesis 130H
The Genesis® 130H Hobbing Machine is a vertical hobber capable of producing gears and shafts with an outside diameter as large as 130mm. The Genesis Hobber was designed as a totally new product incorporating the most modern features and capabilities required to today's gear production.
| | |
 |
GRS-2 Double Flank Gear Roller System
Efficient and reliable functional testing
Accurate and affordable manufacturing process control
Windows-based, user-friendly software
| | |
 |
MicroTop Gear Inspection System
Micro-top Gear Inspection System
Full four-axis inspection capability in a portable, affordable turnkey system. | | |
 |
SIGMA 175GMM Gear Inspection System
The 175GMM Gear Inspection systems offers all the
advantages of Gleason-M&M
Precision’s SIGMA technology in gear measurment,
including four-axis, generative motion,
3D scanning probe system, linear drive
motors and Gleason-M&M GAMA
(Gleason Automated Measurement &
Analysis) software, plus
• Economy and versatility
• Compact design for minimum
footprint
Like all SIGMA series GMMs, the
accuracy of the SIGMA 175GMM is certified
via the ISO17025 and A2LA® quality
systems adopted by Gleason-M&M
Precision Systems.
| | |
 |
Spiral Bevel Gear Cutting Machines
PHOENIX®II 275HC Bevel Gear Cutting Machine
The PHOENIX®II 275HC bevel gear cutting machine is the next generation in cutting machines. The unprecedented monolithic column design is leading edge technology in chip flow, ergonomics, stiffness, cutting process, and maintainability. Pivoting the cutter spindle permits the shortest structural overhang of both the cutter and work for maximum stiffness and thermal stability. A simple chip collector is the only object below the cutter and work spindles. Chips never touch the machine structure.
| | |
|
|
|
|
GLASS GmbH & Co. KG
|
|
 |
AGM-S
Vacuum-high speed mixer with turbohead or knifehead at the bottom of the vessel. For emulsifying fluid or pasty products. Also available with heating and cooling capabilities. Sizes 80 to 600 litres.
| | |
 |
AGM-S LABMIX
Vacuum-high speed mixer with turbohead or knifehead at the bottom of the vessel. For emulsifying fluid or pasty products. Also available with heating and cooling capabilities. Sizes 10 to 40 litres.
| | |
 |
BestCut
Continuous fine cutting system
Rotor/ Stator system with cutting rings and cutting heads for fine-cutting, emulsifying, dispersing and homogenizing,
Capacity up to 4.500 kg/h
| | |
 |
VAS
Vacuum- high speed mixer for powders, fluid or pasty products. Sizes up to 2200 litres.
| | |
|
|
|
|
GLAMA Maschinenbau GmbH
|
|
 |
GLAMA forging manipulators
GLAMA forging manipulators meet all
requirements of modern production machines.
The manipulators have been specially designed for
the use with rapid-acting forging presses and possess
all necessary prerequisites for the integration with a
forging press and the automation of the forging
process as well as for a programme and computer
controlled forging procedure. | | |
 |
GLAMA forging manipulators mobile
GLAMA forging manipulators meet all
requirements of modern production machines.
Since 1961, we have been manufacturing forging
manipulators for open die forging under hammers
and presses and for transporting ingots from the
furnace to the hammer or the press and from there
to the warehouse. Taking into account the latest
technical standards and increasing demands, we have
continuously developed our forging manipulators.
The compact design and manoevrability of the
manipulators allow to transport even in limited
space conditions. Thus, additional devices for
ingot transport are almost unnecessary. | | |
 |
Glama robots and manipulators
Glama robots and manipulators are engineered
to solve tough material handling problems. Based
on an articulated boom system the GLAMA-design
results in the following advantages:
articulated boom system with mechanical coupling
(patented) so that straight line coordinates can be
followed using only a single drive per axis.
small dimension but large work envelope
robust design
fully hydraulic drive system
no rearwards collision space
low wear construction on roller bearings
low installed electric motor driven pump power by
hydraulic accumulator drive
actual value determination by absolute encoders
custom tooling designs | | |
 |
ladle charging trucks
Our ladle charging trucks are designed to transfer
liquid aluminium from one furnace to another
sturdy design
sensitive servo-controls with infinitely adjustable
speed control for all working movements
hydraulically operated tilting system with integrated
pouring spout
interchangeable ladle system
different heights of ladles possible, without
changings at the vehicle
large vertical parallel lift
independently operated ladle cover
180° revolving driver's cabin for best view | | |
 |
The tapping trucks
The tapping trucks are designed for charging
and discharging furnaces in the aluminium
and magnesium industry.
sturdy design
sensitive servo-controls with infinitely adjustable
speed control for all working movements
integrated electronic weighing system to show
the operator the actual crucible content
hydraulically operated specific lever system for
linear movements of the crucible in horizontal
and vertical direction
independently operated crucible cover in vertical
and rotational direction
| | |
|
|
|
|
GKD - Gebr. Kufferath AG
|
|
 |
Automatic backwash filter
Maxflow combines filtration without filter aids - or, if they are required, with considerably reduced quantities of filter aids - and briquetting in a single unit. The main fields of application for Maxflow are particle filtration, the retrieval of recyclable materials and the purification of aqueous solutions.
Maxflow is available in three variants:
- The plug&play solution is a fast and effective solution to a great number of typical process requirements.
- Adaption of the individual components, for example by adding another filter disc to the unit.
- Implementation of a complete system, which can be custom adjusted to meet both known or as yet unencountered customer requirements.
GKD-CompactFiltration's Maxflow concept is a tried and tested serial product with the flexibility needed to be integrated into any customer-specific process. It has proven its efficiency in terms of meeting established standards and as a made-to-measure individual solution. Thanks to worldwide standardized parts and the global presence of GKD through six production facilities, the Maxflow system can be deployed anywhere in the world with equal efficiency. Comprehensive solutions competence, covering all stages from initial layout and dimensioning through to commissioning of the equipment and later expansion or modification to adapt it to changing production conditions, qualifies GKD-CompactFiltration as an efficient systems supplier and reliable technology partner in all stages of the process. | | |
 |
Filter unit for machining fluid
Maxflow combines filtration without filter aids - or, if they are required, with considerably reduced quantities of filter aids - and briquetting in a single unit. The main fields of application for Maxflow are particle filtration, the retrieval of recyclable materials and the purification of aqueous solutions.
Maxflow is available in three variants:
- The plug&play solution is a fast and effective solution to a great number of typical process requirements.
- Adaption of the individual components, for example by adding another filter disc to the unit.
- Implementation of a complete system, which can be custom adjusted to meet both known or as yet unencountered customer requirements.
GKD-CompactFiltration's Maxflow concept is a tried and tested serial product with the flexibility needed to be integrated into any customer-specific process. It has proven its efficiency in terms of meeting established standards and as a made-to-measure individual solution. Thanks to worldwide standardized parts and the global presence of GKD through six production facilities, the Maxflow system can be deployed anywhere in the world with equal efficiency. Comprehensive solutions competence, covering all stages from initial layout and dimensioning through to commissioning of the equipment and later expansion or modification to adapt it to changing production conditions, qualifies GKD-CompactFiltration as an efficient systems supplier and reliable technology partner in all stages of the process.
| | |
 |
Self-cleaning filter for liquids
Maxflow combines filtration without filter aids - or, if they are required, with considerably reduced quantities of filter aids - and briquetting in a single unit. The main fields of application for Maxflow are particle filtration, the retrieval of recyclable materials and the purification of aqueous solutions.
Maxflow is available in three variants:
- The plug&play solution is a fast and effective solution to a great number of typical process requirements.
- Adaption of the individual components, for example by adding another filter disc to the unit.
- Implementation of a complete system, which can be custom adjusted to meet both known or as yet unencountered customer requirements.
GKD-CompactFiltration's Maxflow concept is a tried and tested serial product with the flexibility needed to be integrated into any customer-specific process. It has proven its efficiency in terms of meeting established standards and as a made-to-measure individual solution. Thanks to worldwide standardized parts and the global presence of GKD through six production facilities, the Maxflow system can be deployed anywhere in the world with equal efficiency. Comprehensive solutions competence, covering all stages from initial layout and dimensioning through to commissioning of the equipment and later expansion or modification to adapt it to changing production conditions, qualifies GKD-CompactFiltration as an efficient systems supplier and reliable technology partner in all stages of the process. | | |
|
|
|
|
Gildemeister AG
|
|
 |
CNC UNIVERSAL MILLING MACHINE
DMU 50 | This is the new machine for entry into CNC-universal milling with innovative DMG technology | | |
 |
CTV- Vertical Lathes
CTV- Vertical Lathes | | |
 |
DMU | CNC universal milling machines
With the DMU 50, DECKEL MAHO offers innovative
high tech components in this – the compact class. Both the forward-looking entry-level user and operators in mould construction will find the DMU 50 fully equipped.
| | |
 |
HSC- High-speed cutting precision centres
With the HSC 20 linear SAUER enters the sector of micro- and precision machining. High Tech on highest level compact on 3,5 m2 footprint. Linear drives in all axes with > 2g acceleration and surface qualities up to Ra 0,2 µm represent highest precision and dynamics. Upgrading up to 5-axis simultaneaous due to the integrated swivel-/ rotary table stands for absolute flexibility. The watercooled SB 42 working spindle opens a wide spectrum of materials for different applications in the HSC sector. The stable mineral fibre stand in monoBLOCK® design guarantees a maximum absorbing of vibrations, highest stiffness and stability. Optional the HSC 20 linear can be upgrated by an integrated linear magazin with up to 99 pallets, a 60-fold automatic tool changer as well as a extensive package for graphite manufacturing. | | |
 |
SPEED | CNC swiss-type automatic lathes
Simple axis configuration for simultaneous processing of up to three tools, is the main feature of this machine. More highlights include, a future orientated complete design, stable castiron structure in monoBLOCK® design, a high level of comfort, short setup times, a bar passage of up to 15 mm, linear drive on the axis X and integrated motor spindles and numerous options that range all the way up to the dynamic drives. With the SPEED 12-5 linear, shaft machining, and complete machining of turning parts, can be completed in the shortest possible time. Maximum productivity is achieved with a rotational speed of the main and counter spindle at up to 12,000 rpm., a rapid traverse speed of 40 m/min and an axis acceleration of 10 m/s2. The main and counter spindles can operate simultaneously with different cutting speeds with the two integrated,independently operating spindle drives. The linear drive in the X1-axis makes processing with the highest positioning precision possible.
| | |
 |
universal lathes
NEF-CNC universal lathes | | |
|
|
|
|
Giesserei Heunisch GmbH
|
|
 |
Our range is convincing – down to the smallest detail.
Our areas of competence include high-quality; core-intensive automatically moulded gray and ductile iron castings. Unit weights of approx. 5 to 600 kg are poured at our Bad Windsheim (D) and Slevarna-Heunisch Brno (CZ) locations. In Steinach (D), we produce complex hand-moulded gray and ductile iron castings weighing approx 150 to 2,500 kg.
Our foundry Slevarna Heunisch Krasna (CZ) produces castings in all commercially available aluminum grades. Utilized processes include gravity die casting and low pressure die casting. The highest customer demands of the construction vehicle and machine building industries are met for each and every piece – certified and delivered on time.
Through our own mechanical processing in Krasna (CZ), Heunisch-Guss is able to supply ready-to-assemble components. State-of-the-art processing equipment, including turning and milling centers, finishes our castings such as pump covers and transmission housings. Our internal logistics assures delivery directly to the assembly lines of our customers, allowing for precise planning.
| | |
|
|
|
|
Giana S.P.A.
|
|
 |
Metal cutting Machine tools
Metal cutting Machine tools | | |
 |
Metal cutting Machine tools
Metal cutting Machine tools | | |
|
|
|
|
GGB AUSTRIA GmbH
|
|
 |
Bimetallic Materials
Designed for lubricated applications, these materials are suitable for use in a wide range of operating conditions. They are made of various alloys, such as aluminum-tin, aluminum-silicone, sintered copper alloy, and steel –lead-bronze compounds. Products include SY™, SP™, SZ™, AI06™, AI20™, AI40™, and AI50™. | | |
 |
Fibre-Reinforced Plastic Composite Materials
Various fibre-reinforced thermosetting plastic bearings, including high-performance, filament-wound products such as GAR-FIL®, GAR-MAX®, High Strength GAR-MAX®, SBC™. | | |
 |
Metal-Polymer Materials
Bearing materials for non-lubricated applications (DU®, DU®B, DP4™, DP4B™), marginally lubricated (DX®, DS™, HX™) and lubricated applications (DP4™, DP4B™, DP31™). | | |
 |
Monometallic Materials
A range of oil-impregnated sintered bronze and solid bronze bearings. Products include sintered bronze (similar to Sint A50) and solid bronze (LB9-Machined Bronze, Turned Solid Bronze/ISO4379, MBZ-B09™, LD™, LDD™).
| | |
 |
Other Products
Additional product families to complement the above GGB product portfolio, e.g. specialized housings and assemblies, bi-metallic bearings. | | |
 |
Solid Polymer
Thermoplastic materials processed by injection moulding. These engineering polymers include polyamid-based EP™, polyoxymethylene-based EP12™, polybutyleneterephthalate-based EP22™, polyphenylensulfide-based EP43™ and EP44™, polyetheretherketone-based EP63™ and EP64™, and polyamidimid-based EP73™ and EP79™. EP™ is available in standard cylindrical and flanged bearings, as well as special dimensions and shapes. EP22™, EP43™ and EP63™ are available as semi-finished parts. All of the other EP materials are available by special order. Also offered are POM- or acetal-based Glacetal KA™ and Multilube® engineering thermoplastics | | |
|
|
|
|
GfG Gesellschaft für Gerätebau mbH
|
|
 |
air monitors
osha respiratory air monitors | | |
 |
gas measurement.
gas measurement. | | |
 |
measurement of water refigerants
measurement of water refigerants | | |
 |
multi-gas detectors
multi-gas detectors | | |
 |
ph factor-redox
ph factor-redox | | |
|
|
|
|
GFC AntriebsSysteme GmbH
|
|
 |
Servo motors
Servo motors | | |
 |
Worm gear pair motors
Worm gear pair motors | | |
 |
Worm gearboxes
Worm gearboxes | | |
 |
Worm gears
Worm gears | | |
|
|
|
|
Gerresheimer AG
|
|
 |
Cosmetics glass and finishing
The almost limitless malleability of glass ensures that a suitable get-up can be produced for very type of cosmetic product - from breathtaking perfume flacons to elegant cream pots and exquisite vials for aromatherapy.
Spoil the consumers in your markets with the unique appeal of our products. We give you advice, carry out the computer-aided design work and individual mould-making and realise your exact wishes to the highest quality standards. Every possibility is open to you, from feeder colouring and colour spraying to the sublimation technique, from crystal-clear brilliance to acid etching and printing. We even manufacture and finish white opal glass or elegantly tinted OpalNuance for our customers. And of course we also deal with all the details of accessories, etc. | | |
 |
Pharma containers made of plastic
Pharma containers made of plastic
Plastic packaging solutions: Intelligent diversity covering all aspects of pharmaceutical products
Comprehensive expertise in the sector of pharmaceutical plastic packaging is an important part of the division Gerresheimer Plastic Systems. We offer a wide range of high-quality and innovative packaging solutions for solid and liquid dosage.
A wide, deep and innovative product range
Our product range is highly diversified. It is tailored to the widely differing requirements of the pharmaceutical industry in terms of shapes and sizes. Through innovative developments we contribute to making the delivery of modern medications simpler and safer for patients.
• Our standard range includes containers and closures for tablets, PET bottles, eye droppers, nasal sprays and nebulisers.
• A wide choice of different standards for dosage, closure and security systems makes the range fully adjustable in all categories: tailored to the individual requirements of our customers.
• We offer the total packaging solution from a single source, including internally produced desiccant.
• For many drugs we have found particularly user-friendly forms for handling, precise dosage and application.
• Our supply packaging is designed to ensure problem-free and efficient use in pharmaceutical production.
• For different applications we use a wide spectrum of materials (LDPE, HDPE, PP, PET).
Production and quality
Our manufacturing operations use state-of-the-art technology and apply the most rigorous quality and hygiene standards. This covers all production technologies from injection moulding and injection blow moulding to blow moulding processes. The greater part of our production is carried out in modern clean-room systems which are classified in the 10,000 or 100,000 category. All plants apply the rules of Good Manufacturing Practice (GMP) and are certified in accordance with ISO 9001 and other relevant international norms.
Documentation and worldwide registration
For our products in general, full conformity with the European pharmacopoeia, the United States pharmacopeia and the requirements for FDA registration with a Drug Master File is a minimum standard as part of our total concept. Knowing the extensive requirements of our customers we focus on providing a high level of documentation with our products.
Technology and know-how: the basis for market-oriented product development
Continuous dedication to technology and product development is Gerresheimer’s key in setting the standard for packaging design. On this basis we are able to serve the pharmaceutical markets with the latest developments in packaging systems. We know, understand and reinforce our customers’ business.
As our customers’ total solution provider focusing on innovation, documentation and technology we want to be the preferred global partner in pharmaceutical plastic packaging with the aim to create a preference for our customers’ products.
| | |
 |
Pharma containers made of tubular glass
Clear or amber borosilicate glass of type I is used by us to produce high-quality medicine vials as well as ampoules and cartridges - which overall make up a comprehensive tubular-glass range of primary packaging for pharmaceutics. Highly refined production technologies also allow us to offer extremely intricate shapes. As a vertically integrated manufacturer we also produce the borosilicate tubes internally as intermediate products. | | |
 |
Tablet Containers
Tablet Containers
Plastic packaging solutions: Intelligent diversity covering all aspects of pharmaceutical products
Comprehensive expertise in the sector of pharmaceutical plastic packaging is an important part of the division Gerresheimer Plastic Systems. We offer a wide range of high-quality and innovative packaging solutions for solid and liquid dosage.
A wide, deep and innovative product range
Our product range is highly diversified. It is tailored to the widely differing requirements of the pharmaceutical industry in terms of shapes and sizes. Through innovative developments we contribute to making the delivery of modern medications simpler and safer for patients.
• Our standard range includes containers and closures for tablets, PET bottles, eye droppers, nasal sprays and nebulisers.
• A wide choice of different standards for dosage, closure and security systems makes the range fully adjustable in all categories: tailored to the individual requirements of our customers.
• We offer the total packaging solution from a single source, including internally produced desiccant.
• For many drugs we have found particularly user-friendly forms for handling, precise dosage and application.
• Our supply packaging is designed to ensure problem-free and efficient use in pharmaceutical production.
• For different applications we use a wide spectrum of materials (LDPE, HDPE, PP, PET).
Production and quality
Our manufacturing operations use state-of-the-art technology and apply the most rigorous quality and hygiene standards. This covers all production technologies from injection moulding and injection blow moulding to blow moulding processes. The greater part of our production is carried out in modern clean-room systems which are classified in the 10,000 or 100,000 category. All plants apply the rules of Good Manufacturing Practice (GMP) and are certified in accordance with ISO 9001 and other relevant international norms.
Documentation and worldwide registration
For our products in general, full conformity with the European pharmacopoeia, the United States pharmacopeia and the requirements for FDA registration with a Drug Master File is a minimum standard as part of our total concept. Knowing the extensive requirements of our customers we focus on providing a high level of documentation with our products.
Technology and know-how: the basis for market-oriented product development
Continuous dedication to technology and product development is Gerresheimer’s key in setting the standard for packaging design. On this basis we are able to serve the pharmaceutical markets with the latest developments in packaging systems. We know, understand and reinforce our customers’ business.
As our customers’ total solution provider focusing on innovation, documentation and technology we want to be the preferred global partner in pharmaceutical plastic packaging with the aim to create a preference for our customers’ products.
| | |
|
|
|
|
Graf, Otto, GmbH
|
|
 |
Diamond drinking water reservoir
Containers made from robust, long-life polyethylene
Food-safe design with test certificate in accordance with KTW recommendation
Easy to transport, install and quick to fit due to low weight.
Easy to clean due to smooth tank interior surfaces
TÜV safety-tested | | |
 |
Herkules percolation shaft
TÜV safety-tested
Awarded product of the year by the German Trade Association for Plastics Processing (FKVV)
Cost-effective thanks to good price-performance ratio
Patented fast connection (no screws required for fitting)
Durable seal through solid profile sealing (lifetime of over 25 years proven in laboratory tests)
Can be extended as required. Volumes of several 1,000 l are possible using preformed connections and connection points
Easy to transport due to low weight and practical size (fits through every 80 cm wide door) | | |
 |
Rainwater Harvesting Complete packages
The right one for every situation
GRAF complete packages include all system components needed for rainwater harvesting.
The Carat underground tank packages consist of 4 components of the Carat module system:
1. Carat underground tank
The Carat underground tank is the foundation of the modular system.
2. Cover
suitable for pedestrian loading
or suitable for vehicle loading
3. Extension Pack
Contains all components needed in the tank
4. Technical Pack
Garden or household use
| | |
 |
Septic tank three chambers
Septic tanks with partial biological processes are used to extract floating and removable substances. Due to the sizing of 1500 ltrs per inhabitant, the wastewater passes through the system in approx. 10 days. This allows the microorganisms that have emerged in the sludge to effect partial breakdown of the organic waste, in addition to pure mechanical purification (partial biological purification). These septic tanks require 1500 ltrs per inhabitant and must comprise at least 3 chambers. | | |
|
|
|
|
GRAFE Advanced Polymers GmbH
|
|
 |
Additive master batches for every application
GRAFE Additiv Batch offers you an extensive standard assortment of additive master batches for many thermoplastics, including filled and reinforced types. Through highly concentrated additives, we double the efficiency of color additive batches. In addition, of course, we also deliver combined master batches with color and additives in one batch. | | |
 |
Electrically conductive compounds
GRAFE Polymer Technik offers you an extensive assortment of electrically conductive carbon black filled compounds of PP, PE, and EVA, as well as colored compounds - for instance, for the following applications:
Storage and transport containers as well as packaging material for electronic components to protect them against destruction by electrostatic discharge.
Containers and packaging materialwith a low tendency toward to soiling
Containers and piping systems for areas subject to explosion hazards
Equipment items at electronics work places and in ultra-clean rooms
Electromagnetic shielding of electronic modules and systems for housing parts and comprehensive compacts shielding of different electronic modules | | |
 |
Raw Materials and Auxiliary Agents for Plastics Processing
Raw Materials and Auxiliary Agents for Plastics Processing | | |
|
|
|
|
Gustav Scharnau GmbH
|
|
 |
Transformator
Transformator | | |
|
|
|
|
Gustav Göckel
|
|
 |
Göckel Precision Universal Grinding Machines G 50 elT
Range of application:
grinding of machine-knife, all kinds out of HSS and carbide
Selectable executions - steps to automation
electromagnetic quickchange device for wheels
electronic demag units
steplessy variable grinding motors
automatic sizing units with wheel wear compensation
programm controls for automatic grinding cycles
swing and creep feed grinding
CNC-Controls
grinding system for tapered gibs
grinding system for curved knives
multiple chuck arrangements
special fixturing
two stationary grinding
grinding dust extraction units
handling systems
grinding lengths of 1000 to 6500 mm
grinding motor capacity of 2 to 11 kW | | |
 |
Grinding Machines
Grinding Machines, Tool grinding machines | | |
 |
Horizontal Rotary-Table Surface Grinders With Peripheral Grinding Head
All work pieces which demand highest precision and surface quality
Wood cutting circular saw production
| | |
 |
Vertical Rotary-Table surface Grinders With Segmental Grinding Head
All work piece which demand the most precision at high grinding capacity
Metal cutting circular saw production (concave) | | |
|
|
|
|
Gullco International (UK) Ltd
|
|
 |
KAT® Travel Carriage
The KAT ® is used throughout the world to automate a wide variety of welding automation and cutting automation operations. It is a durable, reliable precision automatic welding machine designed for welding in any position. | | |
 |
KBM ® Bevelling Machine
Gullco KBM ® bevelling machines are used throughout the world for high speed weld preparation of mild steel, stainless steel, and aluminum plate.
| | |
 |
PIPE KAT® Orbital Welding System
Gullco PIPE KAT Automate Pipe Welding Systems with intergrated wire feeder unit incorporates 40 IPM welding carriage design with quick action mounting for ease of installation, linear oscillatorr with adjustable weave width and weld joint centerline adjustment. All electronic motorized functions incorporate jog settings. System comes with main control box with 12ft. umbilical and 27ft. of gas hose and ground cable, wire feed spool capacity of 10lbs. with a maximum wire speed of 720 IPM and a wire size range of 0.8 to 1.4mm. The welding torch uses Abicor Binzel consumables. | | |
 |
Seam Tracker
The KAT ® Tracker is used with a sensing probe to automate a wide variety of welding operations and comes in MIG welding or submerged arc models
| | |
|
|
|
|
Gühring OHG
|
|
 |
Countersinks
Countersinks | | |
 |
Gun Drills
Gun Drills | | |
 |
Indexable Inserts
Indexable Inserts | | |
 |
Machine Tooling ,Work holding devices, Tools
twist drill taps milling cutters reamers countersinks short counterbore systems gun drills | | |
 |
Milling Cutters
Milling Cutters | | |
 |
Reamers
Reamers | | |
 |
Taps
Taps | | |
 |
Tool Systems
Tool Systems | | |
 |
Twist Drill
Twist Drill | | |
|
|
|
|
GSW Schwabe AG Coilhandling Pressen Automation
|
|
 |
Coil Feeding Lines
Pictured above is a 12 tons coil reel with a pulling force-controlled drive, that operates synchronously with the subsequent straightener. This line is capable of processing materials with a thickness of up to 16mm.
| | |
 |
Coil Processing Machinery
GSW Schwabe AG offers you a complete range of machines for the processing of coil material.
This includes coil reels, straighteners, straightener-feeders, roll feeds, pneumatic, hydraulic and electric shears, and also complete lines including mechanic, hydraulic and hydromechanic presses. | | |
 |
Hydromechanical Presses, Leinhaas - Technology
The centerpiece of the Leinhaas-press is the hydro-mechanic drive system.
This system achieves an optimal, automatic adaption of the tappet speed during the individual phases of the working cycle.
Function of the tool: closing, transforming, opening.
The reversion of the movement in the lower dead center is switchable depending on distance and pressure. The repitition accuracy is +/- 0.01 mm.
The height at which the tool is being mounted is infinetely variably adjusted to the different tools in steps of 0.01 mm with a powered tappet adjustment.
| | |
 |
Lifting & Moving Equipment
Be it commissioning, wrapping or moving, GSW offers the optimal ergonomic solution for every case of use. | | |
|
|
|
|
GSG GmbH
|
|
 |
Cold rolling cassettesc
The cold rolling cassette PKG / DMM-T is used for low and high carbon wires with plain (smooth) surface within a finished diameter range from 0,8 – 3,0 mm. The necessary forces to pull the wire through the cassette is supplied by the drawing machine.
The roller bearings are mounted on cooling bolts which are connected to a central water circuit (water cooling). At this type of cassette one roller has a fixed position whereas the second roller is eccentrically adjustable by means of the cooling bolt.
For this reason it is not necessary to point the wire because the adjustment range is approx. 1 mm. A simple and precise setting of the rollers is possible due to the graduation at the eccentrically adjustable cooling bolt.
| | |
 |
combi-lines
bending descaling with position control
feeding device
rotator brushes against scale remains
lubricant coating device with suction
two cassettes PKG/T or PKG/TS
scale disposal
completely dustfree
sound absorbing design
individual design due to modular prinzipl
| | |
 |
Rolling, straightening, cutting
driven rolling device with trio system
max. forces 13000 N (4 - 8,5 mm ribbed)
rolling speed up to 10 m/s
easy handling and maintenance
central setting of rollers
set point control
suitable for smooth and ribbed wire
| | |
 |
WRS
The illustrated GSG-cold rolling line to produce straightened wire bars joins the functionalities of a wire drawing line and seperate straightening and cutting machines. The production speed of up to 6 m/s is three times higher than conventional straightening and cutting machines are operating. | | |
|
|
|
|
Grotefeld GmbH
|
|
 |
Dowel holes, hinge holes or line boring
with Grotefeld aggregates you are optimizing the
output on your machine.
Drive adapters for multiple hole drilling patterns are also available with pneumatic or hydraulic control.
Motor power up to 3,0 kW with max. 6000 RPM
| | |
 |
Grooving, sawing and or parting cuts
Drive adapters for conventional sawing application are also available with pneumatic or hydraulic control.
Motor power up to 3,0 kW with max. 6000 RPM. | | |
 |
Roughing, smoothing, planning profiling or routing
Routing and sawing units for profiling and sizing also available with pneumatic or hydraulic control.
Motor power up to 3,0 kW with max. 18000 RPM | | |
 |
Tracing aggregates from Grotefeld
Floating and Tracing aggregates for tolerance compensation on all sides of the work-piece (from top, from bottom and from the side). | | |
|
|
|
|
Grossmann Maschinenbau GmbH
|
|
 |
Automatic scrap transport system
The fully automatic system takes wagons with scrap, recognizes the type of scrap and empties the wagon over the corresponding container. The weight of the scrap and the charging level of the container are detected automatically. The control sends an SMS to the forwarder when the containers are full. The monthly billing of the forwarder for the disposed amount of scrap is also drawn up automatically by the control. | | |
 |
Presses
Frame structure: Al-profil-system / steel
Conveyor: structured, unruffled, roles, gliding
Drive: three-phase traction drive
Speed of conveyor: according to customer‘s demand
| | |
 |
Robotics gripper for separating flat single sheets
The robot gripper picks up glasses reliably, even if they stick together due to condensation. | | |
 |
Shears
Shears | | |
|
|
|
|
GROB-WERKE GmbH & Co. KG
|
|
 |
Flexible Systems from GROB
High PRODUCTIVITY, high FLEXIBILITY
Flexible Systems from GROB
Complete manufacturing systems, consisting of several machining centers, part handling equipment and automation
Commonly used for medium- and high-volume batch production
High degree of flexibility, with fast changeover and optimum adaptability to changing production needs
High productivity thanks to powerful machining centers and fast linear gantries from GROB
Hybrid solutions
Reduction in interfaces necessary (single-source supplier) | | |
 |
Machining Centers
Economical, fast and highly accurate
Machining Centers from GROB
Individual solutions for flexible manufacturing tasks
Modular design, increased part commonality
Highly dynamic designs: high velocities, high accelerations, high spindle speeds
Models available with ball screw or linear drives
Horizontal single- and twin-spindle models available
High productivity with maximum flexibility | | |
 |
MODULAR TRANSFER SYSTEM
| | |
 |
Special Machine Tools from GROB
Optimized Manufacturing Solutions
Special Machine Tools from GROB
Transfer lines, dial table machines and other special designs
High level of manufacturing effectiveness through equipment customization to meet your individual machining requirements
Extremely low operating costs, thanks to high degree of machine automation
Complete machining of parts on continuous manufacturing lines
Machining of high-volume parts
Can also be used in flexible manufacturing systems
High degree of standardization | | |
 |
System Solutions from GROB
Single-Source Supplier
System Solutions from GROB
Complete systems from GROB: homogeneous concept, eliminates interface problems, simple procurement and commissioning
Single partner for all production requirements
Task-specific configuration of machining centers
Planning and realization of corresponding automation- and assembly systems from GROB
Additional part cleaning equipment, if required
Well qualified personnel with many years of experience
Modern planning methods (Simultaneous Engineering) and planning tools (computer-assisted simulation) | | |
|
|
|
|
Grenzebach BSH GmbH
|
|
 |
Dryers
Our latest generation of high capacity drying devices is proof of many years of Grenzebach experience in building veneer dryers.
The world's biggest veneer dryer was furnished by Grenzebach BSH GmbH: 6 decks high, 50 m long and capable of producing 36 ccm of veneer per hour.
For further information, please, contact Dr. Christoph Habighorst. | | |
 |
Slicers
Proven by satisfied customers, vertical slicers maufactured by Grenzebach are operating successfully in many veneer producing companies. The precision of the slicing technology guarantees even veneer of high-quality.
Further development and technical innovation has resulted in the design and construction of the world's fastest vertical slicer for veneer and to stay-log (half-round) machines. | | |
 |
Veneer Scanners
Veneer scanners evaluate and recognise defects such as holes, splits, discolorations etc.
A digital scan camera with high resolution and intelligent hard- and software ensure cutting optimisation. | | |
|
|
|
|
Greda snc di Daschini N. & C
|
|
 |
Argo Gantry is a 5-axes machining centre
Argo Gantry is a 5-axes machining centre engineered to process elements made out of solid wood, plywood, laminate wood.
The large section working area allows to execute different working operations (through holes, carving, milling, cutting, shaping, holes for doors and windows etc) on 5 sides of pieces of any shape and size thus avoiding any handlings from the operator.
The head features two rotating axes (A and C axis) controlled by NC, which allow the unit to reach all the possible inclinations in the area. The two rotating movements of the head are interpolated and driven by two precision reducers.
The electro-spindle has a power of 16 HP and a maximum speed rotation of 24.000 rpm with liquid cooling system. The tool-magazine is a rotating plate with 12 stations placed at side of the operating head.
The table is divided into working areas in order to enable the operator to load and unload pieces with a no-stop cycle.
On request, the pieces can be fixed through a vacuum system, blower pumps and/or special customized clamps.
The “open” structure allows an easy loading/unloading of large element by means of loading conveyor or gantry crane. | | |
 |
Simple boring and glue-dowel inserting machine
IFS/CS Simple boring and glue/dowel inserting machine
Standard boring unit 3 spindles (center distances on request)
Dowels inserting units n. 3
Min. distance for dowel driving 19 mm.
Dowel diam 8 ÷ 12 mm.
Dowel length 30-60 mm.
Vibrator for dowels feeding: N.1
On request special customized versions available.
| | |
 |
Simple boring machine
FS Simple boring machine
Standard boring head 5 cross-spindels - center distances 17/32 mm
Head rotation 0-360°
Boring motor 3 HP
Net weight 240 Kg.
Dimensions 1200x850x950 mm.
| | |
 |
SPIRIT is the last patented innovation of Greda.
The machine has been engineered to perform working operations on mitered doors, frames and cabinet doors.
SPIRIT is equipped with two independent units: one for cutting, boring and mortising, and the second one for tenoning.
The machine is divided into two working areas that allow to work no-stop with safe and simple loading/unloading handlings.
Each area is equipped with a working table, a 45° fence complete with a digital read-out (visualisation in mm and inches) and clamp.
Moreover, the standard equipment of the machine includes mechanical read-outs for table adjustment, saw-blade for end-cutting and tenoning head.
On request, the machine can also be equipped with special multi-spindle drilling heads.
SPIRIT complies with the international safety norms.
| | |
 |
Tenoning Machine Tsda
The automatic double end-tenoner mod. T.S.D.A. has been designed to execute round and bevelled tenons (vertical, horizontal or inclined) on straight or curved pieces with different dimensions.
The machine features a solid structure and is equipped with a twin-table with non-slipping beds.
The tables slide on rectified cylindrical bars and they are controlled by pneumatic cylinders with hydraulic brake. Both tables can be independently adjusted for height and inclination.
The working cutter speed can be adjusted according to the dimensions, the type of tenon and the kind of wood.
The anti-splintering working cycle together with the alternating movement of the tables assure a clean and precise shaving.
The thickness, the length and the inclination of the tenon can be easily and quickly adjusted thanks to the equipment of graduated scales and mechanical digital read-outs.
The standard equipment of T.S.D.A. includes piece registers and a shaving cutter with throwaway TCT knives.
| | |
 |
The automatic double end-tenoner model
The automatic double end-tenoner mod. T.S.D.A. is designed to execute round and bevelled tenons (vertical, horizontal or inclined) on straight or curved pieces with different dimensions. The machine has a solid structure and is equipped with a twin-table with non-slipping beds. The tables slide on rectified cylindrical bars and they are controlled by pneumatic cylinders with hydraulic brake. Both tables can be independently adjusted for height and inclination. The working cutter speed can be adjusted according to the dimensions, the type of tenon and the kind of wood. The anti-splintering working cycle together with the alternating movement of the tables assure a clean and precise shaving. The thickness, the length and the inclination of the tenon can be easily and quickly adjusted thanks to the equipment of graduated scales and mechanical digital read-outs. The standard equipment of T.S.D.A. includes piece registers and a shaving cutter with throwaway TCT knives. | | |
|
|
|
|
GreCon Greten GmbH & Co. KG
|
|
 |
Density Profile Measuring System STENOGRAPH
The wish of operators and technologists in the wood-based panel industry to scan the raw density profile online during the running production has been regarded as impractical for many years.
By means of the GreCon Inline Raw Density Profile Measuring System StenOgraph, it is possible for the first time to scan the raw density profile, as one of the most important criteria of the quality of particle board and fibreboard, online after continuous presses.
This enables the operator to influence the raw density profile and thus the features of MDF and particle board during the production process.
Shorter running-in times of new production plants and during product changes as well as an optimised production process lead to substantial savings in cost and material while the panel quality is improved. | | |
 |
Mat Scanner with Recognition of Foreign Bodies
Uneven material distribution, glue lumps, superdense fibre lumps and other foreign bodies within fibre, chip or OSB mats can cause material accumulations of high density which cannot be compressed to the adjusted panel thickness by the press. Such superdense zones may cause irreversible damage to the steel belts of continuous presses, especially when producing thin panels.
In cooperation with the press manufacturer Dieffenbacher, GreCon developed the so-called DIEFFENSOR, which is able to detect all metallic and non-metallic foreign bodies of high density in fibre, chip or OSB mats, such as glue lumps, superdense fibre lumps or plastic and aluminium parts, which are not identified by usual metal detectors or magnets. With the DIEFFENSOR, the steel belts of continuous presses can be, for the first time, effectively protected against permanent damage through non-metallic foreign bodies of high density.
| | |
 |
Moisture Measuring System IR 3000 WBPi
Produkt Info
Technology
Components
Brochures
Moisture Measuring System IR 3000 WBPi
Permanent monitoring of the moisture content of chips and fibres is essential for optimum panel quality. The GreCon Online Moisture Analyser IR 3000 WBPi is therefore used to monitor the material moisture after the dryer as well as before and after the blender and above the forming belt.
Overdrying of the material by the dryer can thus be quickly detected and corrected. An optimum panel quality is ensured by the permanent monitoring of the material moisture after the blender and in the forming station.
The GreCon Online Moisture Analyser IR 3000 WBPi saves ressources and ensures quality during the running production.
| | |
 |
Online Bond Analyser UPU 3000
When producing wood-based panels, such as particle board, fibreboard, OSB, plywood and veneered panels, air voids and unbonded areas may occur. Depending on size and frequency, they can represent a loss in quality.
The GreCon Online Bond Analyser UPU 3000 inspects the panels and automatically assigns them to different quality classifications.
Furthermore, the Online Bond Analyser UPU 3000 is able to detect higher density fluctuations which are often an early indication of blisters. This enables the operator to rectify the production process to avoid the production of blisters and air voids and thus the production of bad panels.
In combination with the GreCon Thickness Gauge DMR 3000 and a board scale, GreCon offer the Online Bond Analyser UPU 3000 as quality assurance station. | | |
 |
Spark Extinguishing System BS 7
Filters may burn or even explode because of sparks within exhaust ducts. GreCon Spark Extinguishing Systems are designed to prevent this. They detect small sparks within the ducts and extinguish them in a split second. Spark sensors detect the infrared radiation of glowing particles. Immediately, a dense water mist spray which extinguishes passing sparks is created in a specified distance downstream from the spark sensors. The production process can continue without interruption during the whole procedure.
Fire insurance companies have noticed the minimised risk when installing spark extinguishing systems and may grant discounts on insurance premium rates of up to 15 %. The regulations of the German Association of Property Insurers (Richtlinien der VdS Schadensverhütung), form 2106, specifically stipulate all requirements on spark extinguishing systems. Precondition for achieving discounts on premium rates is the use of an extinguishment system that is approved by this association.
Spark extinguishing systems are amongst the most efficient fire protection systems as a result of their highly-developed technique and their reliability. The use of these systems for various applications is even prescribed by the employer's liability insurance associations and by national factory inspectorates. The German Association of Property Insurers (Verband der Schadenversicherer e.V.), Cologne, have published recommendations on premium rate discounts. All these factors, i.e. discounts on premium rates and technical innovations, help to justify the investment required.
Where do Spark Streams appear?
Spark streams are a very common danger. They cannot be easily detected and this means they are existing but not known! Consequently attention is paid to a spark stream only when it is too late, namely when there has been an explosion or a fire. When working combustible materials sparks are created very quickly. A dull tool, a damaged bearing in the fan, an overheated motor or a foreign body within the material can be the cause. This is a constant danger for all those factories where combustible materials are being worked, exhausted, transported, filtered or dried. The damage statistics provided by the insurance companies point out that filters, dust collection bins, silos and even complete production lines are the areas of plant at greatest risk. Foreign bodies in the conveyed material, defective parts of the production machinery, friction processes as well as electric sparks and self-ignition are all identified as fire-generating. Here are the main danger areas known:
Fibre and Particle Board Industry: The fibre and particle board processing
as well as the further processing of the panels by means of sawing and
sanding
Wood Working Factories: Working of materials by means of saws, planes,
mortisers, hoggers, sanders and other wood working machines
Chemical Industry: Pneumatic conveyors of dusts and powders
Foodstuff Industry: E.g. coffee roasting, tobacco drying and pneumatic conveying of powders
| | |
 |
Surface Inspection System SUPERSCAN
Online Surface Inspection System to visually inspect the surfaces of laminate floorings. SUPERSCAN makes an objective defect recognition, and thus significant quality standards are possible. | | |
|
|
|
|
Gräbener Maschinentechnik GmbH & Co. KG
|
|
 |
3 or 4 roll bending machines
For standard dimensions of SAW pipes the 3 or 4 roll bending machine as a traditional bending process still has several advantages.
GRAEBENER GROUP offers this alternative bending process with its own machine design | | |
 |
4 column-type presses
The column design is characterized by the fact that the crown and the bed are connected to each other and clamped by means of four columns. A main advantage of this design is the easy accessibility to the press and the die space area from all four sides.
4-Column-type presses are standardized for closing-forces of 1,000 , 1,500 ,1,700 and 2,000, 3,500 and 5,000 metric tons.
| | |
 |
Continuous root tacking presses
The main task of the continuous root tacking presses is to close the groove that remains after bending the pipes as a preparation for later welding processes.
By means of a combination of several hydraulically operated press rolls the pipe edges are pressed together at the groove. At this groove a tack-welding will be carried out. After this, the pipe can be finished inside and outside by means of welding at other workstations.
| | |
 |
Frame presses
The crown of the frame press is supported by solid side columns. This type of press is particularly suited for the production of large quantities of a limited scope of products (T-parts, reducers). | | |
 |
Hydroforming / hot stamping
The hydroforming process as a generic term covers different hydroforming processes such as internal high pressure forming, hydromechanical deep-drawing as well as the hydrostatic deep-drawing. By means of hydromechanical or hydrostatic deep drawing, metal sheets can be given complex shapes which can either not be reached at all with the conventional deep drawing processes or could only be reached at extraordinarily high expenses | | |
 |
pipe forming presses
When forming metal sheets into pipes the pipe forming presses are an alternative to the roll bending machines.
The pipe bending process is based on a hydraulically driven bending tool. By means of this bending tool the metal sheet is pressed down between two bending support units. Then the metal sheet is gradually moved through the press until it has reached the desired form
| | |
 |
Post bending presses
If the metal sheet has not been pre-bent before the forming and bending process, there will still be straight ends at the longitudinal edges after the bending. By means of post bending rollers (in case of post bending roller machines) these straight edges are brought into an even shape. In case of post bending presses these edges are rounded gradually (by moving step by step through the machine in a tool). | | |
 |
Pre-bending presses
Pre-bending presses pre-bend the straight plate edges in the area of the longitudinal edges. By means of the pre-bending presses an even rounding of the pipe can be achieved. | | |
|
|
|
|
Gravostar SEH Technik GmbH
|
|
 |
Automatic deburring of undefined edges
Our engraflexx range of deburring tools has been designed to allow the automatic deburring of any undefined workpiece edges directly on the
CNC machine or with robotics.
Benefit: reduces the need for any subsequent manual deburring work.
Our deburring tools provide the following user benefits:
- Lowering production costs
- Improving product quality
- Increasing process reliability
- Shortening the production time | | |
 |
engraflexx AP
The milling tool on the engraflexx AP is independently driven by the integrated milling spindle using compressed air. This tool is mainly used in robotic plants as well as in machines and plants requiring a tool with a driven spindle.
Technical data:
- receiving shaft diameter 20 mm
- milling tool actuated by integrated compressed air spindle
- idle speed 30'000 rpm, rating 280 Watt
- air feed either through receiving shaft or from side
- lateral milling tool deflection to allow positional correction: 8 mm
- lateral milling tool contact force is fully adjustable
- engraved scale to allow precise adjustment of the contact force
- tool clamping by means of precision collet diameter 6 mm
(other clamping diameters available on request)
- use of standard deburring cutters | | |
 |
engraflexx EC
The engraflexx EC deburring tool is clamped in the collet like a conventional milling tool and is automatically selected via the automatic tool changer. The milling cutter is directly actuated by the machine spindle to allow the engraflexx EC to be used on any kind of machine tool. The short video presentation visually demonstrates the pro-
cedure.
Technical data:
- receiving shaft diameter 20 mm
- milling tool actuated by machine tool spindle
- lateral milling tool deflection to allow positional correction:
up to 5 mm as standard, enlarged up to 10 mm, special versions on request
- lateral milling tool contact force is fully adjustable
- engraved scale to allow precise adjustment of the contact force
- tool clamping by means of precision collet diameter 6 mm
(other clamping diameters available on request)
- use of standard deburring cutters | | |
 |
Machine Tooling ,Work holding devices, Tools
Machine Tooling ,Work holding devices, Tools | | |
|
|
|
|
RUDOLF GRAUER AG
|
|
 |
Clip making machine BK-1500
From the coil to the finished packed product, the BK-1500 works fully automatic. The clip machine BK-1500 is designed for the manufacture of all common clips and includes automatic packaging. Zinc coated, painted or plastic coated wire can be processed. Depending on wire-diameter and shape of clip up to 3 wires can be fed simultaneously at production rates of up to 1500 clips per minute . | | |
 |
Coat hanger machine SMB-1
The coat hanger machine SMB-1 is designed for the manufacture of wire coat hangers. From the wire coil or crown stock the machine produces fully automatic finished formed wire coat hangers.
Cam controlled bending tools guarantee a trouble-free production at output rates of up to 3500 hangers per hour.
| | |
 |
concrete fibres machine BF-100
The concrete fibres machine BF-100 is designed for the manufacture of concrete fibres in high volumes.
At a range of wire diameter of 0,5-1,20mm up to 100 wires can be fed simultaneously and manufactured to fibres.
Depending on wire diameter and quality this high volume machine can produce up to 600kgs of concrete fibres per hour.
| | |
 |
Staple automatic machine KS-110
Staple automatic machine KS-110 | | |
 |
Whispering power press
Whispering power press | | |
 |
Wire flattener
Wire flattener | | |
|
|
|
|
Graham Engineering Corporation
|
|
 |
Industrial Shot Pot Technology
The Graham Shot Pot Industrial Blow Molding Machine can be constructed and provided with one- or two-layer parison configurations. These systems can be supplied with three or five parison heads based upon customer needs on specific applications.
These machines are designed to make parts with large annual volumes.
The secondary Shot Pot stores the entire shot capacity required for each head and cycle. The material stored in the shot pot is allowed to “relax” between shots – reducing the residual “stress” in the plastic, and allowing for a smooth and high quality parison to be extruded
Some applications for this technology are:
Consumer goods run in multiple colors (fast changeover and colorant cost savings on multi-layer head
Automotive and consumer applications where both structural and decorative layers are required (soft touch material over PP Base; vinyl co-extrusion... etc)
High-volume, multiple-cavity consumer/industrial products where reduced labor costs and increased efficiencies are required to combat price reduction from foreign or domestic competition.
MULTI-LAYER MACHINE MODEL GEC-5PDL8440
| | |
 |
Intermittent Extrusion C30
Bottled water continues to be the fastest growing segment of the beverage industry. Graham Machinery is the industry leader in extrusion blow molding machinery for producing polycarbonate water bottles, with or without handles. With nearly three decades of technological innovation, WTR has evolved from a supplier of stand-alone machines to a source for turn-key systems.
Using reciprocating screw extruder designs, these machines produce exceptionally high quality bottles at high throughput rates. This machinery is supported by a full range of ancillary equipment, from takeoff to scrap reprocessing.
Everything needed for a successful bottle production line is available globally, and on a 24-hour basis - from design assistance, to installation and testing, to total after-sale support, including spare parts, field service, and processing assistance.
Improved Intermittent Extrusion Equipment
The Next Generation PC Water Bottle Machine from GEC: The C30 Improved Reciprocating Screw Machine
| | |
 |
PC Based Controls
At GEC, we take pride in our investment in technology. Our proprietary PC-based blow molding machine control system, the XBM Navigator™ is just one example of our leading edge research and development. This in-house developed technology is based on the Windows platform. The result is a machine controller that is extremely user friendly and is very well suited to remote diagnostics via modem connection. This feature allows our service staff in York, PA, to dial into your machine and trouble-shoot many process or machine related problems, foregoing many of the costs or delays associated with travel to your facility. The controller is a standard industrial PC, eliminating the need for manufacturer specific components or system expertise, and features designed-in trouble shooting aides, SPC trending, alarm and set value change recording, and more | | |
 |
Rotary Technology
Wheel Technology - Transforming One Industry After Another
The highly innovative Graham Wheel quite literally reshaped entire packaging markets by redefining the standards for high volume, high quality production. Today, this technology is in production on nearly every continent around the globe. With over 250 wheel installations worldwide, the Graham Wheel represents the unchallenged standard for high capacity with superior quality standards | | |
 |
Shuttle Technology - Performance, Efficiency, and Productivity
GEC Linear Shuttle machines and the GEC Rotary Shuttle are known for their efficient operation, compact design, and short cycle time. They are ideal for high-changeover job environments, allowing extremely rapid tool changes with quick setup, while supporting high output rates.
Designed with a compact footprint and efficient layout and delivery orientation, GEC Shuttle Machines reduce capital expenditures for downline support equipment and ensure long service life - all based on precision engineering and a dedication to productivity and efficiency.
Click to see larger image
GEC Linear and Rotary Shuttle Blow Molding Systems
GEC Linear and Rotary Shuttle Blow Molding machinery is the result of advanced technology developed and refined on more than 3,000 systems installed over the last 50 years on six continents. GEC Shuttle machines process virtually any thermoplastic to produce containers from five ML to six liters. GEC equipment conforms to all international safety and operating standards including OSHA and CE certification.
GEC Linear and Rotary Shuttle machines offer maximum flexibility for delivering ideal packaging solutions:
| | |
 |
technology and products plastic industry
technology and products plastic industry | | |
|
|
|
|
Gerosa Group Flexible Packaging
|
|
 |
CHIPS
The possible laminates allows various graphical solutions, without compromising the product’s preservation.
Structures:
OPP+OPP
OPP+OPP barrier
OPP+PE
OPP+PETmet+PE
| | |
 |
CHOCOLATES’ TWISTWRAP
Suitable for packaging chocolates with single or double twist.
Gerosa is a leader in the supply of aluminium foil laminated strips: the possibility of offering a plastic film with an aluminium foil centre strip provides the sector with unbelievable and competitive opportunities compared to conventional chocolate aluminium paper.
Structures:
Cellophane+Alu strip
HDPE+Alu strip
Special PP+Alu strip
| | |
 |
COFFEE Packaging
The market proposes the use of single-portion pods. So, as well as traditional vertical packaging systems for coffee - ground or in beans - there are pod packs (lap-seal bags with heat-seal gussets and high-barrier laminates) and the pack for single-portion pods.
Structures:
PET+Alu+PE
PET+PETmet+PE
OPPmat+Alu+PE
Paper+Alu+PE
| | |
 |
ICE CREAMS Packaging
Cold seal is one of Gerosa’s core-businesses.
It provides for high processing speeds without heat-sealing, which is not suitable for ice-cream packaging, in single and multi-packs.
Tight closures for jars or thermoformed trays are available, too.
Structures:
OPP (transparent/white/metallized)+cold-seal
OPP+OPPmet+cold seal
PET+PE
| | |
|
|
|
|
GERLING Automation GmbH
|
|
 |
Automatic Automatic Polishing Machine
Automatic Polishing Machine GP
Fully automatic polishing of circular saw blades
Clear construction
Simple operation
Little auxiliary process time by use of two polishing tables
Magazine cart with large storage capacity | | |
 |
Automatic Automatic Sandblasting Machine
Automatic Sandblasting Machine GS
Very robust and compact construction
User friendly access
Minor auxiliary process time
| | |
 |
Automatic Wire Saw Brazing Machine GLED
Automatic Wire Saw Brazing Machine GLED
Fast conversion to different saw dimensions
Indexation of the saw blade by means of electric motor
Manual saw blade change
| | |
|
|
|
|
Gerhard Koch GmbH & Co. KG
|
|
 |
Case goods
Case goods | | |
 |
Drawers, cabinet door components, face frames, profiled rails, general suppliers
Drawers, cabinet door
components, face frames,
profiled rails,
general suppliers | | |
 |
Upholstered sofas and recliners, frame components, chairs
Upholstered sofas and
recliners, frame
components, chairs | | |
 |
Windows, doors
Windows, doors | | |
|
|
|
|
GEA Wiegand
|
|
 |
Crystallisation
GEA Wiegand's experience in thermal separation technology stretches back nearly 100 years:
Forced circulation crystallizer
Coarse grain crystallizer
Cooling crystallizer
Today our activities are handled by our sister company GEA Messo
| | |
 |
Distillation
GEA Wiegand's experience in thermal separation technology stretches back nearly 100 years:
Random packing columns
Structured packing columns
Sieve tray columns
Bubble cup columns
Valve tray columns
Funnel tray columns
Molecular sieve | | |
 |
Evaporation plant for food waste-water
Evaporation plant for food waste-water | | |
 |
Evaporation plant for fruit juice
Evaporation plant for fruit juice | | |
|
|
|
|
GEA Westfalia Separator GmbH
|
|
 |
Centrifugal separator
Separators from Westfalia Separator play key functions in many branches of industry.
Whether in fragmentation and ferment processing in the chemical and pharmaceutical industry, oils and fats recovery, the production of dairy products as well as beer, wine and fruit and vegetable juice production, separators have become indispensable in all areas. Whether as stand-alone machines or integrated in complete process lines, Westfalia Separator’s broad product line offers value-adding solutions that point the way forward in terms of quality and customer benefit for all sectors of industry.
The versatility and technological expertise of Westfalia Separator open up a broad process engineering application spectrum for the centrifugal separator:
Centrifugal clarifiers have the task of removing solids from a liquid.
Centrifugal separators are used when a liquid mixture has to be split up into its phases with simultaneous removal of the solids.
Nozzle separators are the absolute specialists when it comes to processing fermentation products in biotechnology, the pharmaceutical and food industry.
| | |
 |
Clarifying decanters
Chemicals and pharmaceutical industries, starch and protein recovery, industrial biotechnology, oils and fats recovery
High product yield of the processed raw materials or preliminary products
Suitable for all capacities
Machine design and process stages optimised for the individual plant
Optimised bowl design for large clarification area and therefore highest performance
Improved flow patterns in the bowl
Dynamic stability of the frame design for a long service life and high safety
Intelligent drive systems for simple differential speed adjustment available achieving optimum dry-substance values
Overload protection and protected bearings ensure permanent and reliable operation
Depending on the area of application, the scroll is faced with hard-metal for wear protection
Corrosion protection for all components which come into contact with product by the use of stainless steel materials
Rotational hard-metal wear bushes in the area of the solids discharge double the service life of the bushes
Ease of access to all relevant components reduces maintenance time
Available with gravity or pressure discharge of the clarified liquid phase
| | |
 |
Decanter
Decanters provide the benefits of high clarifying efficiency and maximum dewatering as well as the separation of liquids with the simultaneous removal of solids. The main requirements in this respect include a high bowl speed, a powerful drive for the scroll and a scroll speed which automatically adapts to the solids loading in the feed.
Due to its versatility and the technological know-how of Westfalia Separator, the decanter can be used for a wide range of process tasks; from clarification through separation, classification, concentration and washing right up to extraction:
Clarifying decanters are used to separate solids out of a suspension to obtain a virtually solids-free, clarified liquid.
Dewatering decanters ensure maximum concentration of the solids to get them as dry as possible.
Separating decanters separate two chemically immiscible liquids with simultaneous separation of the solids.
Classifying decanters split the solids mixture of the suspension into a fine (small particles) and a coarse (large particles) fraction.
| | |
|
|
|
|
GE Energy
|
|
 |
Air-Cooled Heat Exchangers
Low Cost, High Versatility
GE is a world leader in the design and manufacture of air-cooled heat exchangers. The experience we have accumulated during more than 50 years of serving the oil and gas markets qualifies us to provide clients worldwide with the highest quality equipment.
We offer heat exchangers in both forced and induced draft configurations. Plug box, cover plate and pipe and bend models are available in both configurations.
Our manufacturing plant is certified for ASME stamps R, U and U2, and is staffed with third-level NDT personnel. All activities are controlled to strictly satisfy GE's Six Sigma quality assurance system, and to meet ISO 9001 standards. LLRR certifies that we comply with the quality assurance system and ISO 9001 standards.
| | |
 |
Data acquisition module
Data Acquisiti |
| |
