|
|
|
Numatics GmbH
|
|
 |
Compact Modules
Compact Modules | | |
 |
Cylinders
Rotary Actuators | | |
 |
Filters, Reg's, Lub's
Flexiblok | | |
 |
Handling Modules
Euro Grippers | | |
|
|
|
|
NORIS Ernst Reime Vertriebs GmbH
|
|
 |
Chuck inserts
The quick-release inserts in the WE series are designed for use in our quick-release UNI and UNI/HP mounts. | | |
 |
Cutting oil
Special cutting fluid tested for use with our tools. Perfected for the material group being machined or for use as a universal cutting fluid. Also available in chloride-free version | | |
 |
HelixPro chucks
The direction of the spindles can be set off against the feed axis and thus synchronised on many modern CNC machining centres. | | |
 |
Multiple-tooth thread mill
Time-tested thread cutters in either a full carbide metal version with or without countersink section, or in modular form as a holder with a carbide metal multiple-tooth plate. | | |
 |
Single-tooth thread mill HR & EIR
Solid carbide thread mill specifically designed for machining hard materials. | | |
 |
Thread gauges
All conventional thread types (M, MF, G, NPT, UNC and UNF).
Dimensions from M1 to MF 250x6 | | |
 |
Thread Plug Gauges
Choose from an enormous range of thread plug gauges. Thread tools and testing equipment from a specialist. All conventional thread types (M, MF, G, NPT, UNC and UNF).
Dimensions from M1 to MF 250x6 | | |
 |
UNI chucks
The quick-release mounts in the UNI range are ideally designed for use on CNC machining centres, CNC lathes and conventional machine tools. | | |
 |
UNIversal thread cutters NW & AERO
Patented high performance solid carbide thread mills for aluminium. | | |
|
|
|
|
Nomura Automatic Lathe Co., Ltd.
|
|
 |
NN-10CS
The 10CS has the same tool configuration as the 10C
but adds 3 live cross mill/drill/tap spindles for added
capability in a small machine package.
Features:
5 OD turning tools
4 ID tools
3 Live Cross Mill/Drill
Optional Cut-off Tool Breakage Detector
| | |
 |
NN-13 Series
The NN-13/16SB5
Has the same tooling configuration and optional capability as the NN-13SII
but adds a Sub Spindle and 3 Face/Back working tools to accomplish finish drilling
work on the back side of a part
| | |
 |
NN-U3 Series
The design with renewed tool layout ensures a wide space
for easier operation.Four frontal machining tools are provided.
A variety of options including a frontal eccentric
drilling unit are also provided for easier use.
A variety of options including a frontal eccentric drilling unit
are also provided for easier use.
NN-U3 series realize higher speed and cost down
while maintaining the ease of operation
and high precision of the existing machines. | | |
 |
NN-UB7
The UB7 series of machine are enhanced U3 machines
for the machining of more complex parts.
With X , Z-axis capability and an additional 4 ID tools
for the back-spindle, many complex parts can be
completed without the need for secondary operations.
Automatic Lathe needs, Nomura now offer the NN-UB7
6-axis CNC Automatic Lathe.
This machine reflect Nomura's extensive experience in cam-operated
and CNC-drived Automatic Lathe machines.
The NN-UB7 is highly reliable Automatic
Lathe Machine for the machining of small high-precision parts.
| | |
 |
NN-YB
NN-YB series offers more flexibility with sub-spindle operations,
including Turning, Milling and Cross drilling.
Thanks to this new concept, the machining time
can be drastically reduced. | | |
 |
NN-YB Series
NN-YB series offers more flexibility with sub-spindle operations,
including Turning, Milling and Cross drilling.
Thanks to this new concept, the machining time
can be drastically reduced. | | |
|
|
|
|
NOCK Fleischereimaschinen GmbH
|
|
 |
Derinder Machines for Conveyor System
Equipment: With cast-off unit, skinning thickness infinitely variable, spring-beared pressure unit, with steering rollers with locking device, foot switch for turning on and off and a working table for hanging in for manual working. Ergonomic working height. Reinforcement sheets inside the machine for a long durability. Machines are uncomplicated to maintain and easy to serve.
Hygiene: The pressure unit, conveyor belts, blade holder, working table and metal sheet for removal can be taken out of the machine without any tools.
» show technical data «
Cortex CB430
Developped for the small trade or for processing of medium thick pieces of meat.
With short detachable conveyor belt for supply and metal sheet for removal, pressure unit spring-beared but not adjustable in height, conveyor belt for removal optional.
Cortex CB435
Developped for the trade and industry for processing of medium thick pieces of meat.
With detachable conveyor belt for supply and metal sheet for removal, pressure unit spring-beared but not adjustable in height, conveyor belt for removal optional.
Cortex CB495
Developped for the trade and industry for processing even thick pieces of meat. Product and pressure wheels are saved by the additionally infinitely variable adjustment in height.
With detachable conveyor belt for supply and metal sheet for removal, pressure unit spring-beared but not adjustable in height, conveyor belt for removal optional.
Cortex CB495/5
As CB495 but with a cutting width of 500 mm and a through-pass of 120 mm. | | |
 |
Kebab- and Gyros- cutting Machines
Economy CB435/5 KEBAB
Cutting width 500 mm, cutting thickness infinitely variable between 1,5-6 mm. Other thickness of meat slices upon request. | | |
 |
Membraning Machines
The NOCK membraning machines distinguish themselves by a very low loss of meat. Therefore quick amortization of the machines.
Equipment of the machine: With tooth roller and cleaning roller, spring-beared blade holder, pneumatic cleaning system, wheels with locking device, foot switch for turing on and off. Ergonomic working height. Reinforcement sheets inside the machine for a long durability.
Hygiene: A big, entire working table protects the meat from contact with inside parts of the machine and flung away parts of meat. | | |
 |
Poultry Skinning Machine for Conveyor System
Cortex CBP495
Tooth roller with rough or medium toothing, with cleaning roller and air cleaning unit.
Excellently qualified for smooth and efficient skinning of complete chicken legs, chicken tights, upper legs and chicken breasts.
Different types of pressure rollers can be delivered:
poultry pressure roller with soft pressure wheels
roller for treating chicken tights and upper legs. | | |
|
|
|
|
NOBAG NOBS ENGINEERING AG
|
|
 |
Belt tension unit particularly for delicate surfaces
Belt tension unit particularly for delicate surfaces
| | |
 |
Coil processing equipment
Coil unloading equipment
| | |
 |
Customized slitting lines
Light range lines
for non-ferrous metal
| | |
 |
Edge trimming shear for all strip widths and thicknesses
Edge trimming shear for all strip widths and thicknesses
| | |
 |
Manual or automatic tool loading systems
Manual or automatic tool loading systems
| | |
 |
Recoiling equipment
Recoiling system for delicate surfaces >
Recoiling system to guarantee uniform tight coils >>
| | |
 |
Slitting lines - Recoiling equipment
Slitting lines - Recoiling equipment | | |
 |
Standard slitting lines
Standard slitting lines | | |
|
|
|
|
Nivell AG
|
|
 |
levelling of machines
Basically there are two different methods for the levelling of machines. The necessary height adjustment is achieved either by vertical screw systems in a threaded sleeve i.e. threaded rodand nut, or by means of screw-adjustable wedges. Whenever precision is required in the installationor subsequent levelling of machinery, it comes down to how much effort and how many screw-turns ittakes to achieve a set height. With vertical screw systems the height adjustment is directly linked to the amount of movement achieved per turn, whereas with the wedge systems it is the pitch angle which is adjusted. For the levelling wedges illustrated in parts 6 to 8 in the catalogue, 4 to 6 turns are equivalent to 1 mm of
vertical movement. The amount of effort required is critical for all further consideration of possible systems. We give below the approximate figures for the adjustment effort Pu on the average screw radius Rm. For this calculation the pitch angle and the coefficient of friction and also the oscillation levels are needed. To make a meaningful comparison the free collar in the threaded sleeve or rod should not be longer than the diameter of the thread, otherwise overstressing will arise. Such stress increases the load severalfold. The diagrams below illustrating both these levelling systems give the means of calculating the adjustment force Pu needed to raise a load G. | | |
 |
Precision wedges
Bolting to machine | | |
 |
Precision wedges
Bolting to floor > Protection of vibrations 1 daN = 10 N = 1 kp | | |
 |
Round mounts
Aluminium | | |
 |
Vibration damping plates
Elastic supports | | |
 |
Vibration isolators
Singles elements
Silent Delta
Bolting to machine | | |
|
|
|
|
NISSIN MFG. CO., LTD.
|
|
 |
CMH-100-P-6H
CMH-100-P-6H | | |
 |
Engine parts for the vehicle and the motorcycle
Engine parts for the vehicle
and the motorcycle
| | |
 |
Fully automated honing machine for labor-saving and cost-reduction
With users' needs fully in mind, we put all of our up-to-date technical know-how into every stage from planning and designed to delivery. The fully-automatic honing machine is ideally designed to fit right into your production lines and working environment. | | |
 |
Parts for industrial sewing machine
Parts for industrial sewing machine
| | |
 |
Vertical type Super Precision Automatic Honing Machine.
Seeking the inner cylindrical beauty
The challenge to ultra-precision honing by applying the most advanced technology to the foundation of finishing technology.
The Nissin has been manufacturing and marketing a wide variety of sewing machine parts, automobile and motorcycle components and other precision parts throughout the last half century. Applying this manufacturing know-how, our production engineers came up with a broad line of original machinery's.
Nissin's honing machines are highly rated in many fields. Driven to achieve "100% customer satisfaction",the Nissin has been researching and developing precision-finishing technology and techniques, year after year.
| | |
|
|
|
|
Nippon Thompson Co., Ltd.
|
|
 |
C-Lube Linear Way ML
C-Lube Linear Way ML is lightweight and compact Linear Way incorporating built in lubricating parts, C-Lubes, in Linear Way ML of miniature series. Long term maintenance free can be achieved. | | |
 |
linear motion rolling guide
linear motion rolling guide | | |
 |
Linear Motion Rolling Guide Series
The Linear Motion Rolling Guide Series is a range of machine parts that are indispensable for reducing linear motion friction in the positioning mechanisms of machinery. We supply a large range of products including the linear way and linear roller way rail guiding systems, and a ball spline-based shaft guiding system. Available sizes range from the world’s smallest track rail at just 1 mm wide, to a very large version which provides high rigidity and high-load capacity. The Linear Motion Rolling Guide Series is widely used in various fields ranging from the most advanced semiconductor manufacturing devices to large machine tools or construction equipment. | | |
 |
mechatronics series as the third pillar
mechatronics series as the third pillar | | |
 |
needle roller bearing series taking the lead in the industry
needle roller bearing series taking the lead in the industry | | |
|
|
|
|
Nilfisk-Advance A/S
|
|
 |
AX 651 Multi EDS
Unique multi surface machine
Nilfisk AX 651 MULTI EDS is a battery-powered automatic multi surface machine. Unique is that the same machine can be used for both hard floors and soft floors (carpets) by a simple converting function, giving you full flexibility and driving down the total cost of cleaning.
Superior cleaning result on carpets both in LIFT mode or restoration mode and help you protect your carpet investments. Standard is EDS - ECO Dosage Solution - on-board detergent for optimal savings of water and detergent.
Multitasking machine for both hard floors and soft floors, driving down total cost of cleaning
EDS,ECO Dosage Solution for longer running time and precise detergent metering
High cleaning result, CRI Seal of Approval for deep cleaning of carpets
Easy to use and maintenance | | |
 |
Portable commercial vacuum cleaner
New range of Nilfisk backpack vacuum cleaners
Nilfisk-Advance has introduced its GD 5 / GD 10 range of back-pack vacuum cleaners. Aimed primarily at cleaning contractors and institutional maintenance departments, these units complement the company’s existing backpacks to provide productive and ergonomic cleaning in all applications. | | |
 |
Street sweeper
Efficient outdoor sweeping for all seasons
The Nilfisk-Advance Road Sweepers all have high suction and a strong airflow which allows them to pick-up bottles, stones and other heavy debris without clogging and a hydraulically operated flap ensures that these objects are picked up without having to stop the machine. The range in capacity from 500 to 1,300 litres, with large water tanks for enhanced cleaning time. All machines are equipped with stainless steel hoppers for longer working life.
The small model can easily be transported from one job to another on a trailer. With a small wheel base it features an amazing turning radius that allows it to operate in narrow and congested spaces, such as parking lots, footpaths, sidewalks and loading bay areas.
The larger models in the range combine powerful sweeping with compact design. Rear wheel drive and a short wheelbase allow the machine to manoeuvre easily even in the tightest situations and operate close up to walls and other obstacles. Both models have a joystick on the central console that operates all functions and minimizes any possible operator error. | | |
 |
Sweeper-scrubber-dryer
The CR1200/1400 are complete floor cleaning solutions as they can sweep, scrub and dry in a single pass or be used for just sweeping or scrubbing depending on the application.
All models are available as diesel, petrol, LPG versions. CR 1200 is also available in battery versions - to meet the specific cleaning application. The tank capacity is larger than with any other comparable machine, providing longer running time, higher productivity and lower cleaning costs. Operator comfort is at an all-time high, thereby reducing fatigue and increasing safety and performance. Plus maintenance has never been easier thanks to the "no tools" service access points. | | |
|
|
|
|
NILES-SIMMONS-HEGENSCHEIDT
|
|
 |
cnc lathes from the n-series
cnc lathes from the n-series | | |
 |
SPECIAL-PURPOSE MACHINES
Our special purpose machines are conceived on divide-specific requirements of the customers. The special purpose machines for machining camshafts, giant crankshafts, turbine shafts and automotive crankshafts are based on the concept of the NILES- SIMMONS slant bed turning machines.
CNC-turning machines for the machining of main and lifting bearings for crankshafts, such as the N 30 CM represent the NILES-SIMMONS range of special purpose machines for efficient machining operations.
Gladly we advise you individually in a personal discussion and compile complex solutions according to your requirements. | | |
 |
UNIVERSAL AND VERTICAL MILLING MACHINING CENTERS
HPM-Series
The vertical milling centers, developed and manufactured in Chemnitz, have been specifically designed for the tool and die industry. The cross bed conception in connection with efficient, water-cooled motor spindles and a five-axes-control are conditions for a machine concept with high dynamics and highest accuracy.
The series cover the machine types HPM 1150U, 1350U, 1350, 1850U, implemented with rotary swivel and angle table. | | |
 |
vertical turning centers
vertical turning centers | | |
|
|
|
|
Nikken Kosakusho Works Ltd
|
|
 |
Back Side Motor CNC Rotary Tables
Nikken's Back Side Motor CNC Rotary Tables are designed to offer a more compact footprint for use on a wider variety of machine tools.
As the drive motor is repositioned to the rear of the Rotary Table the potential area of machine guard interference to the left and right of the faceplate is eliminated.
The motor itself drives the faceplate, via the worm screw, through a sealed gearbox incorporating hardened and ground precision gears. | | |
 |
Compact Tilting Rotary Tables
Compact Tilting Rotary Tables | | |
 |
Multi Spindle CNC Rotary Tables
Nikken's Multi Spindle Rotary Table range is a more bespoke solution to offer increased productivity and versatility for machine tools.
Available with twin or multiple faceplate configurations to suit numerous centre line pitches they instantly provide extra additional scope for the manufacturer.
Normally fitted to machine tools incorporating multi-spindle heads the Multi Spindle Rotary Table provides and additional axis for each spindle. Another option is for multiple set-ups on a single spindle machine to allow higher productivity per spindle or cater for un-manned operation.
| | |
 |
Multi Spindle Tilting Rotary Table
Nikken's Tilting Multi Spindle Rotary Table range is a more bespoke solution to offer increased productivity and versatility for machine tools.
Available with twin or multiple faceplate configurations to suit numerous centre line pitches they instantly provide extra additional scope for the manufacturer.
Normally fitted to machine tools incorporating multi-spindle heads the Multi Spindle Rotary Table provides and additional two axes for each spindle. Another option is for multiple set-ups on a single spindle machine to allow higher productivity per spindle or cater for un-manned operation
| | |
 |
NC Tooling
Nikken Kosakusho's tooling range falls into two main categories which one might categorize as either "Standard Technology" or "Advanced technology"
"Standard Technology" products provide customers with high quality, reliable manufacturing solutions. They represent outstanding value and deliver unrivalled performance to precision manufacturers operating in high added value market sectors i.e. aerospace, medical, motor sport, oil/gas, power engineering, mould tool and die etc.
For ultra-productive manufacturing solutions, including highspeed machining applications, customers should consider our 'Advanced Technology' products. These products represent Nikken's leading edge technology and can be relied upon to deliver the optimum manufacturing solution. In specific applications such as high-speed machining (HSM) or where difficult-to-machine materials are being used - Nikken 'Advanced Technology' products will improve performance.
Benefits of using 'Advanced Technology' products:
Improved part accuracies and repeatability
Improved surface finish
Higher, faster (and more accurate) removal rates
Improved tool life
Reduced cycle times
Customers who are unsure as to whether they require Standard technology or Advanced Technology products for their specific manufacturing requirements can contact their local Nikken sales representative for further advice and information.
You can search for Milling, Drilling and Boring products by using the search facility below:
| | |
 |
Standard Rotary Tables
Nikken's Standard Rotary Table range is designed to offer increased productivity and versatility on all machine tools. Instantly transforming a standard 3-Axis machine into 4-Axis provides extra additional scope for the manufacturer. Added to the lower costs of updating a machine rather than selecting a bespoke solution then the benefits for our customers are endless.
Nikken Standard Tables are now increasingly specified with a new machine tool purchase rather than opt for a manufacturer supplied solution. This keeps budgets down and offers the versatility and support that can be provided with every Nikken investment. | | |
 |
Tilting Rotary Tables
Nikken's tilting Rotary Table range is designed to offer increased productivity and versatility on all machine tools. Instantly transforming a standard 3-Axis machine into 5-Axis provides unlimited scope for the manufacturer. Added to the lower costs of updating a machine rather than selecting a bespoke 5-Axis solution then the benefits for our customers are endless.
Also proving popular for many customers is to specify Nikken Tilting Tables with a new machine tool purchase rather than opt for a manufacturer supplied solution. This keeps budgets down and offers the versatility and support that can be provided with every Nikken purchase.
Nikken's solutions are becoming ever popular on wider variety of machines as the demand for 5-Axis technology and higher productivity keeps increasing year on year. | | |
 |
Top Side Motor CNC Rotary Tables
Nikken's Top Side Motor CNC Rotary Tables are designed to offer a more compact footprint for use on a wider variety of machine tools.
As the drive motor is repositioned to the top of the Rotary Table the potential area of machine guard interference to the left and right of the faceplate is eliminated. This style of Rotary Table is particularly beneficial on horizontal and pallet change style machines where often a special 'swing-box' is incorporated to allow pallet changing without supply cable interference.
The motor itself drives the faceplate, via the worm screw, through a sealed gearbox incorporating hardened and ground precision gears. | | |
|
|
|
|
Noritake Co., Limited
|
|
 |
Polishing tools
It is a grinding wheel, which has made fixed grain bonded abrasive grinding possible. Comparing loose grains with the lapping and polishing of grinding process, the grinding efficiency is high and the grinding affected layer is small. Besides, the work can be conducted in a good environment. The notable point is that it can adjust grain size and grade in the same way as it does with grinding wheel. Other concerned products in grinding wheel are Lapping wheel, PM-wheel, MF-Plate, CE-wheel, Legato and honeycomb grinding wheel. | | |
 |
Resinoid grinding wheels
This grinding wheel uses a phenol themal hardening resin liquid or powder as the bond, and is used for a wide range of application from high efficiency, heavy-duty grinding utilizing its extreme toughness to light-duty wet grinding and polishing utilizing its elasticity. Typical grinding wheels are the heavy-duty 3-Z grinding wheel, steel ball Z grinding wheel, double disc grinding wheel, roll grinding wheel and tool grinding wheel. The MIRRORLU grinding wheel which is specialized for mirror finishing is also available | | |
 |
VITRIFIED GRINDING WHEELS
This is a grinding wheel using feldspar and inorganic slay as the bond, and is used in a wide variety of primarily precision grinding. Due to the recent technological advances, porous, high wheel speed, machine speed, extremely fine particle, and micron self-sharpening types as well as other types of high performance vitrified grinding wheel(CX grinding wheel) are available. | | |
|
|
|
|
NORMTEILWERK ROBERT BLOHM GmbH
|
|
 |
springs
springs | | |
|
|
|
|
NUM AG
|
|
 |
cnc control with analog interface
cnc control with analog interface | | |
 |
cnc control with digital bus
cnc control with digital bus | | |
 |
drive booster with analog interface
drive booster with analog interface | | |
 |
drive booster with digital bus
drive booster with digital bus | | |
 |
feed and spindle motors
feed and spindle motors | | |
|
|
|
|
NTM Oy
|
|
 |
front loader refuse trucks
front loader refuse trucks | | |
 |
KGLS-2B
KGLS-2B was designed to completely eliminate cross-contamination. It has 2 separately operated bodies and tailgates which makes mixing of the two fractions impossible. The reliability is guaranteed by the simple design. KGLS-2B is built on chassis between 18 to 26 tonnes.
Standard equipment
Binlift (hydraulic levers on both sides)
Pneumatic bin catcher bar
Control buttons on both sides
Proportionally controlled hydraulic levers for the bin lift, the carriage plate and the packer plate
Automatic work cycle
High speed compaction
Hose break valves for raised hoppers
Hopper clearance when raised
Automatic r.p.m. regulation
Amber beacons
Vehicle work lights
Side under run protection
Access door with interlock on both sides
Dustpan and brush with holder
Units are sandblasted to Sa 2.5, following which they are given two coats of paint
Colour rear view camera with in cab-monitor
| | |
 |
multi chamber loaders
multi chamber loaders | | |
 |
OM-2K
NTM OM-2K
M-2K is a fast and reliable two compartment, Automated Side loader. OM-2K is designed in a way that makes it impossible for the two fractions of waste to be mixed.
| | |
|
|
|
|
NT TOOL Corporation
|
|
 |
High Precision Collet Holder
High Precision Collet Holder for high performance drilling, reaming, light milling | | |
 |
High Speed Collet Holder
High Speed Collet Holder for high speed milling, hard milling | | |
 |
Micro Collet Holder
Micro Collet Holder for micro machining
Tool Extension for ERC Micro Collet Holder | | |
 |
Precision tooling systems
Provides innovative precision tooling systems for use in the most advanced cutting technologies | | |
|
|
|
|
www.nskeurope.de
|
|
 |
BALL SCREWS
BALL SCREWS | | |
 |
bearings, automotive components and steering systems
NSK is a global leading supplier of bearings, automotive components and steering systems, precision and mechatronic products. With a turnover of 5 billion euro, the NSK Group employs more than 23,000 people worldwide. The NSK Group’s European arm, NSK Europe, brings together: pan-European sales operations; Manufacturing bases in the UK, Poland and Germany; distribution centres in the Netherlands, Germany and UK; state-of-the-art technology centres; and a comprehensive network of local Authorised Distributors. The sales operations consist of three autonomous business units focused on Bearings, Precision products and Automotive markets with local sales offices throughout Europe. | | |
 |
Linear guides
Linear guides | | |
|
|
|
|
NS Tool Co., Ltd.
|
|
 |
[MUGEN-COATING 2-Flute Inner Radius Cutter]
• Tool life is exceptionally extended as MUGEN-COATING provides additional wear resistance. | | |
 |
[MUGEN-COATING 2-Flute Taper Ball End Mill]
• It is possible to cut both taper and ball simultaneously.
• The available sizes are from radius 0.1 and single angles up to 15¡ë.
| | |
 |
3-Flute Long Shank End Mill for Alminum
• Slimmed shank suits milling.
• Curner-R at flute end effects an accurate side step milling. | | |
 |
Solid Carbide ASHINAGA CHUCK Set¦Õ12
• Holder is made of heavy and stiff carbide.
• It is very suitable for precise cutting at deep area without chattering.
| | |
|
|
|
|
NPE Kulconsult Oy
|
|
 |
Chemical and Petrochemical Industry
Our projects in the chemical and petrochemical industry have included among others, oil refineries, plastics industry and chemical factories.
We can provide process knowhow for the chemical and petrochemical industry for certain sectors. Project management and basic and detail engineering services make it possible to successfully execute extensive projects and provide locally diversified maintenance engineering services. | | |
 |
Process and Mechanical Engineering
Process and Mechanical Engineering
Process Engineering
dimensioning
PI-diagrams and lists
process descriptions
Mechanical Engineering
mill and department layouts
foundation layouts
piping, tanks
steel structures
Mechanical Engineering
machine layouts
assembly drawings
machine components
strength calculation
Assistance in Tendering of Machine and Project Supplier
process diagrams
layouts
| | |
 |
Projects
Our main fields of expertise are different sizes of industrial rebuild projects. In addition, we carry out different kinds of projects for machine and project suppliers, and we execute small greenfield projects, too. Diverse knowledge, strong professional skills and a systematic project management process make it possible successfully implement projects of max 50,000 working hours.
One considerable field of our knowhow is pre-engineering of investments preceding the implementation phase of projects.
Projects can be total projects consisting of all necessary fields, or they can include one or more fields of engineering.
Large projects are managed from our main office in Tampere with regional project support from other regional offices, which carry out minor client projects, too.
| | |
 |
Regional Service
For different engineering assignments and support services for industrial and process plants we provide assistance from our regional offices. The assignments are mainly related to maintenance and development of production. We serve our clients from the office nearest to the project.
For machine and project suppliers we also provide reinforcement for their own engineering organisations.These assignments often include engineering of their own products, project support and commissioning services.
All NPE’s engineering and consulting services are available through regional offices. Regional service is often carried out at our client’s premises. | | |
|
|
|
|
Novopress GmbH Pressen und Presswerkzeuge & Co. KG
|
|
 |
bar bending bench
The bending bench with digital display, metering device and automatic length stop is an example of the advanced design of Novopress products. The bending angle required is entered on a keypad and any spring-back on the material compensated for automatically. With the automatic length stop, both leg lengths and bending angles can be programmed to allow a fast production cycle.
The bending bench combines maximum accuracy with ultimate efficiency and is designed for copper and aluminium busbars up to max. 160 x 13 mm, with a maximum strength of 250 N/mm² | | |
 |
Combined tool for working copper busbars
The "Ready to Operate" high end busbar fabrication system for large production scales.
Three individual stations for cutting, punching and bending of busbars up to 160x13mm (6"x1/2").
Fast and easy workflow due to conveyor links between all stations. The foremost busbar fabrication from Novopress with "DigiPunch 160" and BGD-4, for unsurpassed precision on all punching and bending jobs | | |
 |
Hydraulic punching machine
All necessary components except hydr. power pack and work cylinder are included in delivery.
For operation only a regular 110V/60Hz or 220V/50Hz power source is needed. The LCD measuring system works on a permanent battery basis. Possible hydr. Power Packs: HA1 ES, HA3 and HA4. | | |
 |
Rebar Cutter EMC 10
Portable rebar cutters up to 16 mm in diameter
bringing advanced technology to your building site | | |
|
|
|
|
Novisa S.p.a.
|
|
 |
) TRANSPORTABLE UNIVERSAL RADIAL DRILLS
TUG 60 S
TUG 80-I | | |
 |
DRILLING MACHINES FOR TUBE PLATES
F 100/2000 4000 | | |
 |
RADIAL DRILLS
TRO 55/65/1600
TRO 65/80/2000
TRO 80/2500 | | |
 |
RADIAL DRILLS WITH TRACK-TYPE BASE
100/2500SP
100/4000SP
150/5000 | | |
|
|
|
|
Novindustra AG
|
|
 |
Barrel filling machines
Automatic drum filling system
consisting of:
- semi-automatic sack inserter
- automatic filling station with vibrating
butterfly valve Vibro-Dos
- automatic sack expanding and
welding machine
| | |
 |
Big Bag Filling machines
equipped with:
- platform balance
- hydraulic lifting column
- Vibro-Dos® dosing unit
- filling nozzle with counter ring and
blowing seal
- pneumatic load hook
- inlet folder as closing aid
- vibrating station
| | |
 |
Box filling machines
Automatic filling line for cardboard boxes with inliner
Equipment of the filling line:
Automatic bag presenter to prepare the inliner, inliner inserter, automatic filling place with sampling device, welding machine for bag closing and conveying system. | | |
 |
Combined Filling Station for Big-Bags and Drums
Filling nozzle with inflatable hose and counter ring loop attachment with pneumatic clamps.
Drum filling
For the drum filling, the filling nozzle with inflatable hose is exchanged by a nozzle with counter ring. | | |
 |
Sack filling machines
Sack Filling machines | | |
|
|
|
|
Norsonic
|
|
 |
Calibrators
The use of sound calibrators dates back to the days when it was easier to design a stable sound calibrator than a stable sound level meter. Today, sound measuring instruments, in general, are as stable as the sound calibrators.
However, measuring microphones are very delicate devices designed to fulfil very rigid specifications. This makes them vulnerable and subject to damage unless care is taken.
One may therefore say that a calibrator is just as much a verification of proper operation as it is a device for re-adjustment of sensitivity of sound measuring instruments.
The Norsonic selection of sound calibrators comprises three types, viz. the Nor1251, the Nor1252 and the Nor1253. The difference between them lies in their accuracy; while the Nor1251 is a class 1 calibrator and the Nor1252 is a class 2 calibrator, the Nor1253 is no less than a class L calibrator. It also satisfy all class 1 requirements!
| | |
 |
Nor117 Vehicle Noise Analyser
Measurements of noise in accordance with ISO 5130
General type 1 sound and noise measurements
The Norsonic Vehicle Noise Meter Nor117 is a sophisticated sound level meter designed with ISO 5130 vehicle noise measurements in mind. The Nor117 extracts the rpm directly from the sound level by use of advanced FFT and cepstrum technique. This means that your vehicle measurements can be made in a much faster and convenient way than before.
The ISO 5130 requires three consecutive measurements to ensure repeatability. The Nor117 knows this and guides you through. You simply key in the rpm value and the instrument will prompt you to release throttle as soon as this value is reached. Once three valid measurements have been made, the highest will be taken and used as the valid result - a procedure in accordance with ECE Regulation No. 51.01.
| | |
 |
Nor118 Sound Level Meter
Everything you need inside the instrument!
Industrial hygiene
Product development
Quality control
Noise mapping
Sound power
Environmental noise
Building acoustics
Speech intelligibility
The modular design of the Nor118 enables functional expansion to take place when you need it.
1/1 and 1/3 octaves
Statistics
Level vs. Time
Multispecter
Building acoustics acc. to ISO11052, 140 & 717
Reverberation time calculations
Trigger
STIPA
FFT
| | |
 |
Nor121 Real Time Analyser
Specifically designed for environmental noise assessments and building acoustics
Records the sound signal itself
Stand-alone building acoustics mode - no PC needed
Pure tone detection mode
Parallel measurement reports with six levels of nesting each having individual time settings plus profile and event based data
Real time frequency analysis (0.1-20 000 Hz) in octave and third octave bands with the results as instantaneous, Leq or percentile spectra
Measures all time constants and the A, C and Linear weightings simultaneously
High dynamic range - optional 120dB dynamic range
Full size graphics display with backlight
Internal hard disk and standard PC card for the storage of data
Results can be exported via the PC slot, RS-232 serial or the Centronics parallel ports
Advanced trigger functions
Comprehensive marker functions with user selectable data labels
Powered by long life rechargeable batteries or from external 11-18 V supply
Internal oscillator to support automatic calibration of Norsonic weather protected microphone systems
Accepts weather data from approved meteorological stations and integrates the results into the measurement files
Allows the measurement in broadband and frequency domain of structural vibration levels | | |
 |
Nor133 and Nor136 Vibration Meters
The Precision Vibration Meters Nor133 and Nor136 are designed in accordance with ISO 8041. In their basic versions, both meters are well suited for measurement of whole body and hand arm vibration measurements. | | |
 |
sound level meters
sound level meters | | |
|
|
|
|
Nihon Almit Co. Ltd
|
|
 |
consumables
Almit offers an expanding range of consumable products
to provide the highest quality total soldering solutions to
electronics manufacturers. Again, the emphasis is on
consistency underpinned by a company-wide commitment
to proactive support and fast delivery across Europe | | |
 |
Lead Free
Almit's lead-free solder paste and solder wire range
embraces today's environmentally responsible manufacturing
strategies while still including innovative formulations, such
as Bismuth, for lower melting points with no mechanical
disadvantage.
Companies wishing to change to a lead-free solder
should, in the short term, seriously consider Almit's LFM-48
Sn/Ag/Cu range of alloys. Alternatively, look at the addition
of either Bismuth or Antimony, the choice being dependant
on temperature or strength requirements.
Overall, the Almit range of lead-free and low-lead alloys
have superior mechanical properties than that of standard
Sn/Pb.
| | |
 |
Solder Flux
Almit produces specialised fluxes designed to
complement the specific properties of Almit solder products.
For instance, in conjunction with high-tensile SJ-7 solder,
Almit's BM1 flux gel formulation is ideal for manufacture and
rework of solder bumps. In addition, the BM1 gel dispensed
from an Almit flux pen is perfect for BGA repair | | |
 |
Solder Paste
Consistency is the key to Almit's advanced solder paste
formulation. Almit uses only the purest raw materials with a
perfect particle size to ensure its solder paste never varies.
That means there's always the same amount of paste in
your stencil aperture to give ideal printability and eliminate
adjustments on your screen printer. The result is higher
yields, less rework and a reduction in the quantity of paste
used.
Stringent processing controls also give Almit solder
paste an exceptionally extended life. In fact, Almit paste
permits a generous 24-hour process cycle with up to one
hour on the stencil between print strokes, eight hours on
the board before placement, and a 16-hour window before
reflow. Add a six-month shelf life and excellent wetting
properties and you can see why Almit solder paste is
specified by so many of Europe's top manufacturers. | | |
 |
Solder Wire.
Quicker wetting, absolute consistency and special
processing make Almit solder wire the unchallenged leader
in manual and automated soldering applications industry-
wide. Using the purest raw materials, solder properties are
guaranteed to be constant from the start of the wire to the
end of the reel - and on to the next reel | | |
 |
Super Dry Cabinet
Super Dry Cabinet
Super Dry cabinets are auto-electronic, moisture-proof
storage solutions.
Store and protect your electronic components at less
than 5%RH or 10%RH, as per IPC/JEDEC J-STD 033.
Storage of components at this ultrahumidity level can
reset the clock and extend your components shelf-life.
It can eliminate baking. Room temperature dessication of
electronic parts will reduce potential defects introduced
during aggressive "bake-out". Can be used for Bare-Board
storage - put an end to Oxidation!
Create constant RH controlled environments in the
laboratory, inhibit the formation of moulds on precision
optics. Super Dry cabinets are damp-proof storage that
keeps your dry materials dry and your tools rust-free.
Protect your audio/video data, priceless treasures,
valuable collectables etc.
Why is Super Dry the No.1 Dry Cabinet in the world?
Quality Manufacturing - Built to exacting ISO 9001 standards with quality control
and perfect performance in mind.
ESD Safe Design - Cabinet body, doors and glass panels are shielded with a
conductive coating. All cabinets are equipped with a 1MOhm ground wire.
Special Dehumidification - Super Dry cabinets are installed with U-2001 dry units to
absorb the moisture and finally discharge it as vapour through the rear of the
cabinet.
Exceptional Recovery Times - Every cabinet has contact switches on each of the
doors to control an air circulation fan inside the unit. When the door is opened
the fan stops, when the door is closed the fan starts again to accelerate the
absorbing of the moisture inside the cabinet.
Super Dry cabinets have been successfully put to the test at customers facilities
all over the world.
1400 users in 26 countries have decided that Super Dry is their choice!
| | |
|
|
|
|
Niehoff GmbH & Co. KG, Maschinenfabrik
|
|
 |
Super Fine Wire Drawing Lines
Super Fine Wire Drawing Lines | | |
|
|
|
|
Nidaplast
|
|
 |
extruded polypropylene honeycomb materials for use as core materials
nidaplast® is a family of extruded polypropylene honeycomb materials for use as core materials for structural sandwich panels. | | |
 |
nidaplast
nidaplast® is a family of extruded polypropylene honeycomb materials for use as core materials for structural sandwich panels. | | |
|
|
|
|
Nelco Contact AB
|
|
 |
Nelco manufactures and keeps in stock a competitive range of electrical components, installation material, tools and cables for industrial applications
Nelco has with its wide product range and efficient logistics become one of Swedens leading distribution companies in the electrical and electronic field.
Nelco manufactures and keeps in stock a competitive range of electrical components, installation material, tools and cables for industrial applications.
We introduce our range through wholesalers in the electrical, electronic and automotive field and also directly to OEM-customers.
| | |
|
|
|
|
Nehlsen GmbH
|
|
 |
Chemical-physical treatment plant
A chemical-physical plant (CP plant) is used to dispose of emulsions, oil-water mixtures, rinsing liquids, used oil, acids and bases. The aim of the process is to break down the liquid into its components.
Delivery
Emulsion, for example, is delivered to the plant by suction trucks. In the first step, the solid material is filtered out and then treated in a high-temperature hazardous waste incinerator. The emulsions are then pumped into a storage tank and the exhaust air is dissipated through a filter.
Separation of oil and water
Emulsion is separated into water and oil by adding hydrochloric acid. The acidic mixture of oil and water is further treated in an emulsion cascade, allowing the oil to float to the surface before it is conveyed into the holding tank for decanting. The water is transferred into a different holding tank to remove any remaining oil before being discharged into the public sewer.
Cleansing (oil)
The oil is pumped into the holding tank of the decanter where it is separated into sludge, water and oil using a heat exchanger. The sludge is burned in a high temperature hazardous waste incinerator, while the water is pumped into a holding tank to be further treated before being released into the public sewer. The oil is conveyed into storage tanks, from where it can be picked up for either thermal recycling or refining.
Neutralization
The acidic water from the holding tank is conveyed into the separating plant where it is neutralized with the use of chemicals. Before the neutralized water can be released into the sewer, it is analysed at the on-site laboratory to ensure that indirect discharge thresholds are not being exceeded.
De-watering of sludge
Sludge is formed when acidic water is treated and this is then dewatered using a membrane filter press. Depending on its composition, the dry sludge will be either recycled thermally or disposed of. Before the filtered water can be released into the sewer, it is analysed to ensure that discharge thresholds are not being exceeded.
| | |
 |
Mechanical-biological treatment-stabilisation plants
Mechanical-biological stabilisation/treatment (MBS/MBT) plants are used to treat household and commercial waste in order to gain an organically stable fraction that can be disposed of safely.
Since 1 June 2005, it is no longer allowed in Germany to dispose of untreated waste in landfills. Currently, Germany has 45 MBS/MBT plants in operation with an overall capacity of 5 million tonnes per year.
The aim of an MBS/MBT plant is to treat and stabilise waste in such a way that prevents or minimizes any damage done to the environment due to greenhouse gas emissions and highly contaminated landfill leachate. In addition, it is the aim to recover valuable secondary raw materials such as metals and to produce refuse-derived fuel (RDF) of high calorific value. So MBS/MBT plants not only reduce the volume of the landfill fraction and greenhouse gas emissions but they also produces RDF that can be used as a substitute for fossil fuels.
Nehlsen developed, built and operated its first MBS/MBT plant in 1998. Today, three modern MBS/MBT plants have resulted from this first pilot project and are operated at an annual capacity of 163,000 tonnes. Want to learn more? Click here for details of completed projects.
The main treatment steps of a typical MBS/MBT pant are described in the following paragraphs.
1. Mechanical pre-treatment
Firstly, the waste is delivered to a fully encapsulated plant where rejects and secondary raw materials such as metal, wood and plastic are extracted before the waste is fed into a mechanical shredder. The waste is then reduced in size and homogenised before being separated into two fractions: the organic fraction is treated biologically and the fraction containing high calorific material is turned into RDF, which can be used in a waste-to-energy (WtE) plant for the production of steam, heat or electricity.
2. Biological stabilisation/treatment
In this step, the organic fraction is dried for 8 days using an in-vessel system, which reduces the weight of the drier and more stabilised material by 25%. There are a number of in-vessel systems available, such as containers or tunnels, which should be chosen according to the waste composition and the local conditions. After the drying process, further material of high-calorific value is then mechanically separated from the material.
3. Encapsulated intensive rotting and open rotting process
The Nehlsen concept is based on the encapsulated intensive rotting process, where air is added to the biologically dried waste fraction to speed up the process of achieving biological stability. As a result the rotting time and the floor space required are reduced. The advantage of the fully automated encapsulated intensive rotting system is also, that dust and odour are collected and cleaned in the waste gas purification system. In order to break down the organic material quickly, the intensive rotting process is optimised by controlling the amount of air and water added during the 2-week process. The material then undergoes a 2 - 8 weeks open post-rotting process before being deposited in a landfill.
4. Refuse-derived fuel production
Nearly half of the original input material becomes refuse-derived fuel (RDF), a substitute for fossil fuel that can be used in combined heat and power plants in order to produce electricity and steam. This high-calorific material undergoes various mechanical treatment steps such as cutting, sorting, classifying and compacting, in order to achieve the various qualities customers require. For more information on RDF-CHP plants please click here.
5. Air cleaning technology
To comply with the required legal limits, the waste gas from the mechanical and biological process is treated and cleaned in a waste gas purification system. Highly polluted waste gas is cleaned by using regenerative thermal oxidation plants (RTO), while the less polluted waste air is treated using biofilters.
| | |
 |
Plastic treatment plant
Plastic treatment plant
In this treatment plant mixed plastic, such as crisps packets, yoghurt containers or plastic bags, are refined into agglomerate that is then used as a reducing agent for pig iron in the steel production process.
Screening and sifting
The refining process starts in the rotating drum, where the packaging is freed from contaminants. The plastic is shredded and ferrous and non-ferrous metals such as iron and aluminium are extracted using a metal separator. An air separator is used to sort light and heavy plastics.
Agglomeration
Pressure and friction heat are used to compact light plastics during the agglomeration process producing granular agglomerates of different sizes. These are again freed from ferrous and non-ferrous metals and before it is conveyed to a sieve.
Screening & sizing
The agglomerate is separated into three different sizes using sieves. The agglomerate with a size exceeding 1mm is collected in a bunker and can be used in thermal recycling. The medium-sized fraction between 1 – 8 mm is placed into the silo via a conveyor screw. The fraction that is greater than 8 mm is shredded and also conveyed into the silo.
Loading & utilisation
The agglomerate is stored in silos, then placed in bags and transported to the steel plant. The plastic agglomerate, together with hot air, is injected into the steelwork’s furnace creating gasses that draw oxygen out of the iron ore. Normally, heavy oil is used for this process but using plastic agglomerates helps to protect the environment by preserving valuable primary resources.
| | |
 |
Pressing of bales
This technology is used for single material streams – such as paper, foil or polystyrene – that do not require treatment, but can pressed into bales for easy transportation straight away. Our presses are able to compress voluminous materials such as foil into easy-to-handle bales using metal bands for safety. That way more material can be loaded on our trucks and transported to the recycling plants, which both reduces costs and protects the environment.
| | |
 |
Recycling at -120° C - Cryogenic separation technology
To be able to re-use contaminated packaging, Nehlsen has developed a technology that can separate harmful residues, such as chemicals or oil, from sought-after raw materials like metal and plastic. We can also recycle oil filters and composite material made of plastic/metal and rubber/aluminium.
At the present time the cryogenic plant can treat around 9,000 tonnes a year and we are receiving material from across the whole of Germany, and also from the Netherlands, Belgium, Luxemburg and other parts of the EU.
To be able to use the contaminated metal and plastic packaging as secondary raw materials, it must be cleared of harmful residues. This process happens in a low temperature tube, that is twelve metres long, with a diameter of one and a half metres. The material is conveyed through the pipe and cooled to approximately minus 120°C by a special quick-freeze process using liquid nitrogen. The brittle and friable residues, along with any adhering substances are then mechanically separated in a hammer mill. After automatic sorting, just the clean plastics and metals are left, ready to be reutilised. After being packed into practical multi-compartmented big bags and containers, the recycled raw materials are sent to our customers.
With the aid of the cryogenic plant we are able to achieve purity levels between 60-70%. These metals are then used commercially under the product name of CyroTall, and the plastics under the name CyroPlast. | | |
 |
Sorting plant for commercial and packaging waste
In sorting plants, different types of consumer goods packaging waste and commercial waste are separated.
Sorting and screening
On arrival, the waste is crudely separated and freed from large anomalies. The sorting process starts in a rotating drum where smaller contaminants are separated from the material. The rotating drum with its different sized holes allows the material to fall onto different conveyor belts. Larger items are sorted manually and put into their relevant boxes.
Separation, sifting & sorting
The small-sized fraction first passes a magnetic separator to remove ferrous metal and then a separator for non-ferrous metals removes items such as aluminium and tin.
The medium-sized fraction is divided into light and heavy fractions by an air separator. The ballistic separator then sorts the secondary raw materials according to their size and weight, before another separator removes the metals and divides them into ferrous and non-ferrous fractions to further improve the quality of the secondary raw material streams.
Near-infrared technology
Secondary raw material streams pass near-infrared devices before they reach the manual separation station. These devices use compressed air to extrude materials such as paper, foil or different types of plastics (PE, PP and PET), which are then moved into different storage boxes via conveyor belts.
Pressing & Loading
After manually checking the quality of the secondary raw materials they are pressed into bales, loaded onto vehicles and then supplied to manufacturing industry.
| | |
 |
Treatment of refuse-derived fuels (RDF)
processed in a special treatment plant for substitute fuels to ensure that they are specifically tailored for their use in either combined heat and power plants or the cement industry.
Shredding and separation
A mechanical gripper is used to load the refuse-derived fuels into the shredder. Ferrous and non-ferrous metals, such as iron and aluminium, are first separated and then the remaining material is sorted according to its size and weight by means of a ballistic separator.
Near-Infrared technology
Both the small-sized and heavy fractions are conveyed into a bunker for later use in thermal recycling. The lighter large-sized fraction is further shredded and sorted using near-infrared devices. Compressed air is used to extrude polyvinyl chloride, which is then collected in a bunker, compressed and recycled.
Milling & loading
The refuse-derived fuel fraction is again separated from ferrous and non-ferrous metals and then milled. The material is grinded by a millstone and then pressed through a sieve to produce a grainy material of defined quality.
Utilisation
The refuse-derived fuel can now be used in either combined heat and power or cement plants as a substitute for primary raw materials.
| | |
 |
waste to product services.
waste to product services. | | |
|
|
|
|
NDC Infrared Engineering Ltd
|
|
 |
Model 300 Series Beta Transmission Sensors
The NDC Model 300 Beta Sensors are designed with accuracy, precision, and safety in mind. Their ultra-high efficiency detector allows them to outperform competitive sensors and an innovative detector design allows NDC to use lower activity sources. This design is safer to implement; and due to these sources' lower shielding requirements, we can provide a lighter weight sensor, thereby reducing long-term wear on the scanning equipment.
Model 301 Strontium 90 sensor is used when a beta sensor is most applicable, and when the product weight range is from 100 to 5500 grams per square meter.
Model 302 Krypton sensor is used when a beta sensor is most applicable, and when the product weight range is from 25 to 1200 grams per square meter.
| | |
 |
Scanning Frames
Scanning Frames are a critical factor in making a profile measurement. If the material is not presented to the sensor in an accurate and repeatable way, you will not be able to get the most accurate and repeatable measurement. This is why NDC places emphasis on engineering and producing the most accurate scanning frames in the industry. Our scanning frames' registration performance, coupled with our sensors' accuracy and repeatability, give you the most accurate profile measuring tool available.
The type of scanning frame required depends on the application:
Single-sided Scanning Frames
These are used with sensors measuring from one side of the moving web such as NIR, X-Ray or Gamma Backscatter Sensors.
Dual-sided Scanning Frames
These frames are installed for use with sensors measuring through the product or from both sides of the product such as NIR, X-Ray, or Beta Tranmission Sensors, as well as Laser Caliper Sensors. | | |
 |
Scanning Profile Systems
To meet the needs of the many different types of web processes, NDC has created a range of scanning system solutions which generate profile information by incorporating measurement data from the measurement sensors and positional data from the scanning frames. There is a wide choice of system configuration from single to multi-measurement scanning, with and without control.
To facilitate the implementation of these systems and to provide maximum performance with greatest flexibility and convenience, NDC created its TDi (Total Distributed Intelligence) platform. In the TDi system platform, each sensor and scanning frame comes with its own built-in intelligence for higher speed and greater accuracy in measurement and superior connectivity.
This distributed intelligence is achieved by a state-of-the-art processing engine called a D-BRIC. Each D-BRIC measures just 4” X 6” (10 cm x 15cm), yet is powerful enough to run an entire gauging system on its own. This dedicated processing engine turns a product measurement sensor into an iSensor™ (intelligent sensor) that independently performs all measurement tasks; in the same vein, each iFrame™ (intelligent frame) uses its D-BRIC to generate cross-web profiles, perform controls, and work with other iFrames to manage more complex processes. These iSensors and iFrames connect via standard Ethernet to form a network with intelligent operator workstations, thereby eliminating proprietary cabling, making TDI the least complex of any gauging system.
The entire family of NDC sensors including Beta, Gamma, IR, Laser and X-Ray are supported as iSensors. The NDC MiniTrak single-sided and O-frame scanners as well as the high performance AccuTrak scanner are all supported as iFrames. What's more, all NDC legacy systems can be upgraded to take advantage of TDI’s simplicity and speed.
| | |
 |
System 5400
System 5400 | | |
|
|
|
|
Natural Packaging Co.
|
|
 |
Chips and Dried Nuts Packaging Group
Packaging Structures
Mono Layers
OPP, Met OPP
| | |
 |
Ice-Cream and Ice-Cream Cone Sleeve Packaging Group
The punching and cone sleeving machines for ice-cream cone sleeve production are able to produce different angle, diameter and size cone sleeves. The cone sleeve pack is composed of
Aluminium and Kraft Paper lamination..
| | |
 |
Natural packaging machine
Natural packaging machine portfolio is furnished with the most updated technology. Natural serves with graphic reproduction department, two eight colours flexo printing, cutting and slitting machines, paper bag machines, ice-cream cone sleeving and punching machines, warehouse and dispatching departments for staying ahead of customer demand. Natural Packaging continue to improve its technology with new investments. Natural also puts its signature on Turkish packaging sector with the highest technology and ten colour WindMöller & Hölscher Rotogravure printing machine.
Natural Packaging which aims to follow the latest technology is also going to take a place in the rotogravure printing market with high quality products. | | |
 |
TEA PACKAGING GROUP
Our process lines which produce paper based , undercoated multilayered, different OPP, MetOPP, PET and Aluminium combinated rectangular sole bags and food packaging sacks are the highest capacity and technology in Turkey.
The production can be made with fast, high quaity and quantity printing possibilities.
Tea Bag Packaging Structures
OPP/Alu/LDPE, OPP/Alu/Paper/Paper, OPP/MetOPP/Paper /Paper, OPP/Paper /Paper
| | |
|
|
|
|
NAP Autoteile GmbH
|
|
 |
Double-Tailpipe with y-piece; straight, square, rolled in
Product No.: E8020230 | | |
|
|
|
|
Nanotec Electronic GmbH & Co. KG
|
|
 |
Brushless DC Motors
The competitive electronically commutated 3-Phase Brushless Motors (EC-Motors) are especially suited for applications requiring high running smoothness and lifetime. The highly energetical permanent magnets allow for a very good degree of efficiency, fast acceleration as well as rotational speeds up to 14.000 revs./min. Three 120° shifted hall sensors electronically provide feedback about the rotor position. Optional encoders up to 1000 imp./rev. allow for high resolution positioning controls.
Advantages
significantly higher degree of efficiency and power density than induction motors (for the same power, about 35% volume and weight reduction)
highest lifetime and running smoothness in brushless technics with precision ball bearings.
the linear torque curve allows for a very big speed range at full motor power and thus better tuning to the required load rations
reduced electric interference radiation and good thermal properties
mechanical exchangeability to standard stepper motors means lower construction costs and higher parts diversity | | |
 |
Encoder
Our 3-channel encoders are, besides their compact design and extremely small mass, above all distinguished by the fast and simple mounting.
Available Types
HEDS These Encoders are 3-channel Encoders without linedriver, they do have 5V TTL-signals A´, B´ and I´(Index).
HEDL- Series Encoders come with an additional linedriver
HEDM -Series have a very high resolution but only 2 channels A´and B´(withot an Index)
NEDS/ NEDL -Series is a smaller and more cost efficient encoder from Nanotec (24V Version available, too!).
We recommend an integrated encoder in a terminalbox -Motor for for rough enviromental conditions- see steppermotors with protection class IP!
| | |
 |
Linear-Actuators
Nanotec's universal linear drives offer a host of new, low-cost and powerful potential applications.
Simple and flexible motor design slashes system costs
Stroke-independent traversing of any position
High, reproducible resolutions (<1?m) and fast feed rates (>250mm/sec.) with identical unit volume pave
Direct coupling of power into the load does not require additional components and consequently features a rigid and light mechanical system
With a stationary screw, highly dynamic and rigid machine designs and multimotor mode are possible
Even high power can be sensitively controlled with low energy requirement
Partially self-restraining, thus additional brake not necessary
Stroke depends solely on available screw length
| | |
 |
Stepper Motors
Stepper Motors | | |
|
|
|
|
Nakamura-Tome Precision Industry Co.,Ltd.
|
|
 |
CNC universal milling machine
CNC universal milling machine | | |
 |
Four turret twin-spindle CNC lathe
Four turret twin-spindle CNC lathe | | |
 |
Super NTJX
World Premiere Y-axis on high rigidity lower turret
40tools Number of stock tool (op.80,120tools)
140mm / 70mm Y-axis on upper and lower slides!
6000min-1 Milling speed (Tool spindle)
10HP Built-in tool spindle motor
20HP / 15HP Motor power L 15 / 11kW R 11 / 7.5kW
7.5HP Lower turrets milling motor
230degree B-axis positioning range (±115degree) | | |
 |
Twin-turret twin-spindle CNC lathe
Twin-turret twin-spindle CNC lathe | | |
|
|
|
|
Naigai Ltd.
|
|
 |
Automatic Film Taping Machine for PP (Polypropylene) Tape
This model straps by new developed 30mm wide PP film tape around the package. The unique new PP film tape, gPure Tapeh, substantially reduced running cost and built-in 2,000 meter film coil releases you from frequent coil change. The material of PP film tape is made of mono-polypropylene (PP), which is environmentally friendly. This model is able to use other wide tapes by changing attachments as traditional F61 series use. Letters or bar codes are legible trough the tape. This model has also many other excellent features.
| | |
 |
automatic strapping machine
Compact and supple in design,
The functional beauty of gband-A-matichlies in our pursuit of energy efficency, safety and comfort.
The unique, highly quality, high speed mechanism of gband-A-matic7110hgreatly improves the operational efficiency in strapping
| | |
 |
Fully Automatic Strapping Machine
Designed for use in fully automated conveyor lines at a factory. F112's table height is adjustable, so it can be set up to fit perfectly into an existing driven table belt or roller conveyor line. Either a driven table belt or roller conveyors are available for use on this model. | | |
 |
Semi-Automatic Random Carton Sealer
Designed to provide optimum flexibility for production runs of random carton size, and recommended for taping high/low profile, light or heavy weight, special and versatile profile carton.
Built for dependable performance and easy operation. | | |
 |
Semi-Automatic Strapping Machine (Full Cabinet)
Strapping Machine
(Full Cabinet) A band-A-matic original model. Equipped with an internally located strap coil. F20X is constructed with a durable cabinet for operator safety. This full cabinet model can be easily used by novice operators. | | |
 |
Standard Automatic Strapping Machine
gband-A-matic 7110h, a high quality, safe, high speed strapping machine. Utilizing a newly developed sealer head, a custom-made CPU and many other innovative features, 7110 paves the way for high quality general purpose stapping machines. With 50 strapping cycles per minute, 7110 gets the job done in less time than competing machines. The"band-A-matic"one-touch strap setting and unique one master operation button makes set-up and operation easier than previous models. "band-A-matic 7110"is so efficient, it's like magic! | | |
 |
Table Type Mini Semi-Automatic
These super compact strapping machines are safe and economical. The Mini series of machines are perfect for stores and offices with limited space. Semi-automatic, automatic models, as well as models specially designed for small packages are available. Please choose the model that best meets your needs. | | |
|
|
|
|
Nagel Maschinen- und Werkzeugfabrik GmbH
|
|
 |
Finishing Machines
Finishing Machines | | |
 |
Tools and Abrasives
Tools and Abrasives | | |
|
|
|
|
Nabtesco Corporation
|
|
 |
Dry Vacuum Pump
The dry vacuum pump is intended to evacuate the inside of wafer processing units in the process of semiconductor fabrication. It features the worldfs first 2-stage screw design that offers both proper resistance to byproducts, which has been unavailable so far, and savings in energy (electric power, cooling water, nitrogen). It meets the increasing need for energy conservation aimed at the prevention of global warning and reductions in production costs | | |
 |
GH Series
The GH series has been widely adopted in industrial robot transferring, gantry loader robots and other applications. The high-speed and highly accurate positioning capability and highly rigid design make this series best suited for transferring heavier objects. In addition, the gear head type design allows simple one-touch mounting to the main types of servomotors.
| | |
 |
RD-E and RD-C Series
The RD-E and RD-C Series may be applicable to every type of factory automation (FA) equipment. The advantageous gear head feature based on the RV reducer provides ease of design and configuration of highly accurate position alignment systems | | |
 |
RV-E and RV-C Series
The RV-E and RV-C reducers are used as the joints of industrial robots. They are very compact and lightweight, while at the same time being highly rigid and overload resistant. In addition, these series feature reduction in backlash, rotational vibration and inertia, which ensures higher accelerating capability, smoother motion, and higher positioning accuracy, thus leading to further enhanced robot controllability.
| | |
|
|
|
|
NELSON Bolzenschweiß-Technik GmbH & Co. KG
|
|
 |
Stud welding machines
Stud welding machines | | |
 |
Welding accessories
Welding accessories | | |
|
|
|
|
Nerling GmbH Systemräume
|
|
 |
clean room cabin
Air-conditioned clean room cabin for the assembly of micro parts | | |
 |
Clean room, highest technology for a clean job
Five factors make your clean room a tailor-made place of work.
Shape of room and size
Cleanliness class
Heating, ventilation and air conditioning (HVAC)
Personnel and material sluice (air lock)
clean room ceiling | | |
 |
Room systems made to measure
Room systems made to measure
Making room for your Precision work | | |
|
|
|
|
Nexans Deutschland Industries GmbH & Co. KG
|
|
 |
cable sets
cable sets | | |
 |
power cables
power cables | | |
|
|
|
|
newtec packaging
|
|
 |
FFS bagging machine (form fill and seal)
Bagging machines of the Form Fill and Seal type manufacture the bag either from a plastic tubular film with a gusset (FFS) or from a flat film (VFFS).
A range of metering-weighing devices installed upstream prepares the doses before filling (net weight). | | |
 |
Layer deposit type bag palletizer
This range of palletizer can process a very broad spectrum of products in all types of bagging.
The orientation of the bags is carried out on a case-by-case basis by a claw or an orientation cross.
The layers consist of row of bags on row of bags so that the shape of the bags is retained. Each layer is moulded and pressed so as to ensure the best possible geometry of the palette. | | |
 |
Open-mouth and valve bag bagging machine
This range of bagging machines make it possible to bag granulated or powdered products in the ready-made open-mouth bags.
A range of metering-weighing devices installed upstream prepares the doses before filling (net weight).
Bags of between 5 and 50 kg can be processed with or without gussets.
Upstream, different bag closing systems are available: stitching, folding stitching, removal of crepe tab, folding and gluing, welding. | | |
 |
Pallet press
For certain highly fluid or highly aerated products, it can be useful to stabilize the load by compressing it.
Our hydraulic presses can apply pressure of 2 to 5 tons to the load for a configurable amount of time. | | |
 |
Vertical stretch hood machine
The pallet stretch hooding machine enables the protection and stabilisation of palletized loads by the application of an elastic hood on 5 sides.
The hood is manufactured from a polyethylene tubular film with a gusset. It is cut to the length corresponding to the measured height of the pallet.
The hood is mechanically stretched to then be released over the load.
This method of hood application is particularly important because it does not use any heat source (the hood is not shrunk) and at a clearly lower operating cost than that of shrink wrapping. | | |
|
|
|
|
Newman Machine Company Inc.
|
|
 |
hardwood mills double planer
hardwood mills double planer | | |
 |
hardwood mills gang ripsaw
hardwood mills gang ripsaw | | |
 |
KV-65 Chamfering Machine
The Newman KV-65 Chamfering Machine equipped with a floating head will chamfer random width lumber between 3-1/2" (81 mm) and 6" (152 mm). The unit is equipped with automatic hopper feed and stacker for ease of operation and high productivity. For fast chamfers of random width material the automatic KV-65 will provide years of reliable and dependable service at an affordable cost. | | |
 |
Planer Mills
Newman Whitney has developed the PM-1600 modular, high-speed, four-sided planer to produce a high quality finish on lumber ranging in size from 1"x2" to 6"x15".
An electrically driven planer with computer controlled roll speed synchronization, cutterhead positioning, optimized speed control and touch screen operator interface, the PM-1600 comes standard with Quick Change Head (QCH) modular assembly, allowing for a variety of tooling. It is capable of feed speeds up to 3,000 fpm. The PM-1600 is available with an inboard or outboard profiler, an additional mid-roll to make it an eight-roll machine and a high quality finish module to make it a six-head model.
The heavy-duty four-sided planer matcher with 16" diameter steel feed rolls, is built to last in a demanding environment, without sacrificing production or quality. Newman Whitney has led the industry with innovations such as QUIETCUTTM helical carbide cutterheads, quick-change cutterheads, computer diagnostics, electric and/or pneumatic feed works and fabricated steel frames.
| | |
|
|
|
|
NEUTEQ EUROPE LTD
|
|
 |
Bespoke Machine Tools
NEUTEQ EUROPE offer technical solutions for a range of engineering processes utilising the latest CAD technology, over 20 years of engineering experience (both mechanical and electrical/software engineers) and comprehensive knowledge of the production environment for the automotive, aerospace and Formula 1 industries.
NEUTEQ EUROPE's design team adopt a "working together" attitude with the customer so that the final design meets the customer's expectations. From design to manufacture to commissioning and final installation we work together with the customer so that customer satisfaction is maximised.
| | |
 |
Many machine tools
Many machine tools have the flexibility to retrofit equipment to the latest technology available in today's market. | | |
|
|
|
|
NEUMAN & ESSER GROUP
|
|
 |
Compressor Technology
Leading Recip Compressor Technology for Over 100 Years!!
For designing reciprocating compressors, a flexible product portfolio of frame sizes and construction forms, meeting special requirements and complying with API 618, API 11P and ISO 8012, is available. Dry-run as well as lubricated process gas compressors are used for compressing natural and technical gases in the chemical, petrochemical and food industry. 100,000 Nm³/h volume stream, 12,000 kW driving power and a discharge pressure of 700 bar are the basic data of NEA's performance spectrum.
| | |
 |
Grinding Technologny
Systems for Powder Technology
75 years of experience in mechanical processing and the continual dialogue with customers are the basis for the high performance- and quality level of the NEA grinding and classifying systems. To the traditional applications of grinding systems in the ceramic, chemical and pigment industries, special grinding and classifying systems have been added which are best suited for the production of powder coatings and for use in the food industry. Efficient after-sales-service, and individual solutions for modernization and reconstruction of existing powder processing systems are offered as well.
| | |
 |
Installation and Commissioning The "what, how and where" is sorted out by one of the NEA engineerng companies in collaboration with the customer. NEAC Compressor Service sees the project through in practice, reaching from anchor sleeve-position d
The "what, how and where" is sorted out by one of the NEA engineerng companies in collaboration with the customer. NEAC Compressor Service sees the project through in practice, reaching from anchor sleeve-position definition in the reinforcement to the release for the concrete foundation's grouting, and finally to the turnkey delivery of the complete compressor unit.
Attended by the NEAC supervisor at site who is in permanent dialogue with the project team of NEA Deutschland, components are installed made-to-measure and free of stress.
The NEAC supervisor coordinates the team of specialists, comprising building enterprises, crane and transport companies, electricians, I & C and NEAC service technicians in order to ensure that the compressor plant is put into operation in due time.
Operating conditions are tested by means of cold checks and unloaded test runs with nitrogen. All functions are checked, adjusted and prepared for the start-up commissioning, like simple-load and no-load control, continuously variable control of flow rate and remote control. With the documentation of technical operating parameters as well as with the delivery certificate, the start-up commissioning is concluded successfully. During the test procedure the operating staff is trained and instructed in operating modes, program flows and safety criteria.
In accordance with the SCC**-certificate of NEAC Compressor Service in Germany only trained staff following the relevant safety criteria during the whole assembly is deployed.
| | |
 |
Two-crank dry-running compressor, construction size 25
Two-crank Dry-running Compressor ZS 25
| | |
 |
Two-crank dry-running compressor, construction size 300
Two-crank dry-running compressor, construction size 300 | | |
|
|
|
|
Neuhaus Elektronik GmbH
|
|
 |
conductive stripes
neuhaus conductive stripes | | |
 |
silicone seals
neuhaus silicone seals | | |
|
|
|
|
NETZSCH−Feinmahltechnik GmbH
|
|
