|
|
|
Lutz-Jesco GmbH
|
|
 |
chemical pumps
chemical pumps | | |
 |
Chlorine Control Valve
Chlorine control valve (ATE) control range: up to 200 kg Cl2/h
C 7700 chlorine control valves are electrically adjustable plastic control for chlorine gas metering under vacuum. They allow a continous proportional metering of chlorine gas but can also be used as the final control element within an automatic control system. The drive is a servomotor (ATE). The unit is controlled either manually by an open/close key or a controller with three-point switch.
0 (4) ... 20 mA control upon request.
Fields of application
Public baths, swimming pools
Water stations
Waste water treatment
Water treatment
| | |
 |
diaphragm pumps
diaphragm pumps | | |
 |
Motor-driven Diaphragm Metering Pumps
MEMDOS E / DX 4...150 | | |
 |
Motor-driven Piston Metering Pumps
KARDOS KN
| | |
 |
piston pumps
piston pumps | | |
|
|
|
|
LINSINGER MASCHINENBAU GmbH
|
|
 |
Carbide circular saws for billets
For solid material, tibes and profiles of steel | | |
 |
Carbide vertical circular sawing machine
Carbide vertical circular sawing machine KSA 1010 for billets and special profiles (at a manufacturer for chassis of track laying vehicles) | | |
 |
Tube cut-off machine
Clamping device for tube cut-off machine
Multi-Cut MC4-610 CNC
| | |
 |
Tube cut-off machine Multi-Cut
For cutting pipes in a tube plant (ERW line) | | |
|
|
|
|
Linnhoff & Partner Galvanotechnik GmbH
|
|
 |
Barrel materials
Barrel materials | | |
 |
Bearing systems
In order to guarantee a sufficient plating current in the barrel and to realize high batch loads we can offer you two different standard types:
Plastic plain bearings
Plastic plain bearings with cable pear contact | | |
 |
Contact systems
In order to supply you with the optimum contact for your product range, we have developed a number of standard solutions.
Cable pear contact with plastic plain bearing
Cable contacts are the most cost-effective and cmmonly used type of contact. They are particularly suitable for ompact bulk material and therefore cover a wide range of applications.
Disc contact with metal plain bearing
Disc contacts are particularly suitable for high current transfer. They can be used for bulky, compact and sharp-edged materials and for sensitive goods which could be damaged by fixed contacts.
Strip contact with metal plain bearing
Strip contacts are placed in the drum corner bars and transmit the current evenly from the liquid-tight metal plain bearing through the contact discs to the entire internal length of the drum. In doing so, the inside of the drum remains smooth. With strip contacts, a wide range of products can be galvanised. This type of contact is particularly suitable for rod products.
| | |
 |
Perforations
The quality and cost-effectiveness of drum galvanising depends to a large degree on the type and size of the perforation.
Filter-plug
The filter-plug perforation system offers you the following crucial advantages:
ease of replacement* * - the filter plug always facilitates optimum adjustment to the product so that a decision in favour of a particular perforation is no longer irrevocable
· the doming of the filter-plug cap in the direction of the inside of the drum ensures that flat components will not adhere to the drum
· The filter gauze properties minimise drops in voltage and carry-over losses. The large filter plug recesses increase the pump effect and ensure optimum electrolytic exchange | | |
|
|
|
|
Lift products Inc
|
|
 |
MAX-LIFT
The best value in lift tables with unparalleled features! Reduces awkward bending and lifting since the work load is always at the correct level. The possibility of back injuries is also reduced and productivity is increased.
The MAX-Lift is a superior scissor lift table currently offered in the 2000-6000 lb capacity range.
The MAX-Lift Scissor Lift table is a quality table with features such as: Built in safety bars
Trapped top & bottom scissor arms
Grease fittings on pivot points & cam rollers
Magnetic backed control box
| | |
 |
MAX-M22
The MAX-M22 series lift table is designed for those medium duty applications where a lift table is required. Similar in design to premium MAX-LIFT series the M22 is a quality table that offers an economical solution. | | |
 |
Maxx-Stacker Mini-Lift
Manual Push Manual Lifter | | |
 |
Maxx-Stacker MXPDM
Walkie Self Propelled Electric Stacker 2,000-3,000 lb. capacity | | |
 |
Maxx-Stacker MXPTE-45
Walkie Electric Pallet Mover | | |
 |
Moto-Cart Jr
The MOTO-CART is a battery operated self-propelled electric platform truck. It can be used almost anywhere equipment and supplies have to be moved. This unique cart increases productivity and reduces injuries caused by pushing and pulling ordinary non-powered carts. This flexible vehicle can travel over carpeting, tile or any hard surface, go in and out of elevators and handle 1,000 lbs. on inclines up to 6 degrees. | | |
 |
The Lift-N-Spin
The Lift-N-Spin has a raised height of 35". This is an ideal height for work positioning applications. The rotating top avoids the need to walk around or reach across. | | |
 |
Tilting lift table
Tilting lift table
900kg - 2200kg (2000lb - 5000lb)
Lift Products MAX-Tilt & MAX-LIFT & TILT tables are designed for those applications where tilting or lift and tilting the load provides for improved access to the product. Table available with 45, 60 or 90 degree tilt.
Both series are electric hydraulic with the 45 degree models powered up and gravity down while the 60 and 90 degree models are powered both up and down with double acting cylinders. With capacities of 2,000 - 6,000 lbs., the MAX-series table can handle most applications.
| | |
|
|
|
|
LIECHTI ENGINEERING AG
|
|
 |
5-Axis Machining Center
5-Axis Machining Center for dynamic machining of Blisk, Impeller und Turbine Blade.
Torque-Motors for dynamic machining
Max. part length 335mm
Max. part Ø 350mm
Vertical Spindle
Tail stock CNC controlled
Spindle power 16 kw, 20000 rpm, 82 Nm
Tool magazine 30 tools HSK-63
Pallet pool 8/16 Positions | | |
 |
g-Mill: 5-axis HMC
5-axis Ultra-Dynamic HSC Machining Center for producing Turbine Blades, Blisks , Impellers and other complex parts.
g-accelerated 5-axis machining
Max. part length 550 mm
Max. part Ø 550 mm
20° slanted mono-block gantry concept
Tailstock CNC controlled
Spindle power 22 kW, 15000 rpm, 183 Nm
Toolmagazine 50, 97 or 144 tools
Palletchanger 2 positions, automatic | | |
 |
MULTIMILL 3215-HD
6 spindle, 5-axis Heavy Duty Machining Center for producing Turbine Blades, Blisks , Impellers and other complex parts | | |
 |
TURBOBLISK 1005
5-axis Ultra-Dynamic HSC Machining Center for producing Blisks, Impellers and other complex parts.
g-accelerated machining
Max. Part dia. 1000 mm (51")
Spindle speed 18000 rpm or 24000 rpm
Spindle power 44 KW or 30 KW
Spindle torque 57 Nm (42 ft lb) - 135 Nm (99 ft lb)
Toolmagazine 30, 60 or 80 tools
Spindle taper HSK A 63 or HSK A 80
Palletchanger optional | | |
 |
TURBOMILL: 5-axis VMC
5-axis VMC: Ultra-Dynamic HSC Machining Center for producing Turbine Blades.
g-accelerated 5-axis machining
Max. part length 1400-2600 mm (47"/71")
Max. part dia. 650 mm (26")
Second synchronously workpiece drive
20° slanted C-Frame
Tailstock CNC controlled
Spindle 12000, 15000 or 18000 rpm
Toolmagazine -32 tools
| | |
|
|
|
|
Liebherr-Verzahntechnik GmbH
|
|
 |
Gear Tools
The Liebhherr-Verzahntechnik GmbH in Ettlingen is a specialist for the manufacturing of gear cutting tools. The complete equipment program contains the following tools:
Shaping cutter, wafer
Shaving cutter
Hob cutter, form milling cutters
Master gear
Rolling discs, rolling racks
Pressure wheels and deburring discs
Clamping arbors, clamping nuts
Matrices and stamps for chipless gear production
Broaching rings, rack type cutter
Shaping cutter holder
Sharpening machines, sharpening fittings and sharpening service | | |
 |
Liebherr-gear hobbing machine platform 1
gear cutting machines program contains:
Production machines for gear hobbing and shaping for the automobile industry.
Universal machines featuring up to 6,000 mm workpiece diameter.
Special machines for finishing by generation and profile grinding.
| | |
 |
Liebherr-generating and profile grinding machine
With the production of gear cutting machines, Liebherr is a worldwide leading manufacturer of gear hobbing machines, gear shaping machines, generating- and profile grinding machines as well as cutting tools. These products are used by notable companies of the international vehicle industry.
The programme of the gear cutting machines is completed ideally by the product range automation- and handling systems. In this sector, gantry robots, automatic loading- and unloading devices for machine tools as well as manifold transport devices are offered.
| | |
 |
material handling
The material handling division is concerned with the automatic handling of workpieces in production systems including loading and unloading of machine tools as well as storage of parts.
As a partner of the international automotive industry, Liebherr-Verzahntechnik GmbH, Kempten, has integrated more than 12,000 machine tools into production systems since 1970.
| | |
 |
Material handling systems
The material handling technology from Liebherr offers a customized program for automotive and machine tool industry requirements.
Gantries
Pick and Place
Robotics
Palletizers
| | |
 |
PHS pallet-handling system
The PHS pallet-handling system is designed to automatically supply machining centres with workpieces mounted on pallets. It is available in three sizes and accommodates transport loads ranging from 500 to 5,000 kg. Each size is a modular system with individual adaption possibilities for the respective application. The number of connected machines as well as equipment and storage slots remains variable. With an option to include handling of unmachined and finished parts using euro-pallets, the system meets every requirement for state-of-the-art production. Easy access to the machine is also provided thanks to an optional front access unique in this product segment. This access allows for both manual and automatic operation free of restrictions.
| | |
|
|
|
|
Liebherr Hausgeräte GmbH
|
|
 |
Display freezers
In the food sector the correct presentation of goods is of particular importance when it comes to encouraging customers to buy. These freezers with display prove how invitingly ice cream and frozen food can be presented to your customers - and what benefits state-of-the-art refrigeration technology can offer professional users. In addition to the properties of the re-circulated air system, these appliances offer a whole range of other benefits. In conjunction with the interior light, the illuminated display is very eye-catching. The heated outer pane ensures that the insulation glass of the triple-glazed door does not mist up. With these appliances, the temperature can be set between -10°C and -22°C.
| | |
 |
Freezers
A wide range of freezers | | |
 |
Ice cream chest freezers
Even the most intensive usage leaves them unimpressed. Liebherr's sales chest freezers are designed for heavy-duty use. Top quality ensures a long service life in all conditions - whether in a restaurant kitchen, a retail outlet or in an ice-cream kiosk. Every business is bound to find exactly the right appliance for its own individual needs in Liebherr's wide range of sale chest freezers. | | |
 |
Universal appliances with re-circulated air cooling
Liebherr's universal refrigerators with re-circulated air cooling are ideal when fresh goods have to be chilled fast. For example, large quantities of cold drinks can be chilled and sold in a much shorter time than in a statically cooled refrigerator. This refrigeration system keeps the temperature even and the humidity constantly high throughout the interior. The temperature can be set between +0 °C and +15 °C. | | |
|
|
|
|
Leuze electronic GmbH + Co KG
|
|
 |
cubic series
cubic series | | |
 |
Forked photo electric sensors
Forked photo electric sensors | | |
 |
measuring sensors
measuring sensors | | |
 |
Ultrasonic Sensors
Ultrasonic Sensors | | |
|
|
|
|
LEUCO LEDERMANN GmbH & Co. KG
|
|
 |
Boring Bits
Boring Bits | | |
 |
Circular Saw Blades
Circular Saw Blades | | |
 |
Clamping Systems
Clamping Systems for Through Feed Machines
Clamping Systems for Stationary Machines | | |
 |
DIA - Tools
DIA-Saws
DIA-Hoggers
DIA-Cutters with Bore
DIA-Shank-Type Cutters | | |
 |
Hoggers
Twin Tec Hogger
Segmented-Hoggers p 200 mm / 430 mm
Folding-Segmented Hoggers p 200 mm / 250 mm
Hoggers for Finger Joint Machines | | |
 |
Profile Knives, Turnover Knives
Profile Knives, Turnover Knives | | |
|
|
|
|
LEONI Kerpen GmbH
|
|
 |
Automation Cables
Automation Cables
| | |
 |
Data Cables
Data Cables
| | |
 |
Fibre optic Cables
Fibre optic Cables
| | |
 |
Logging Cables
Logging Cables
| | |
|
|
|
|
LEONHARD KURZ GmbH & Co. KG
|
|
 |
ALUFIN Special
LUXOR®/ALUFIN® HC
Heavy Coverage
Opaque quality for use on untreated cardboard and paper surfaces with good
suitability for embossing and textured stamping.
Main Characteristics
suitable for stamping cardboard or rough, unprinted paper
excellent processing capability on all commonly used stamping machines
in the graphics industry
very good coverage
well suited for relief embossing
good adhesion in structure embossing (micro embossing among others)
very high gloss
also suitable for paper, PVC, PE, PP and PET labels at high speed
on rotary stamping units
Fields of Application
Greeting cards, paperbacks, advertising material, folding cartons,
sheet labels, various stickers.
Stamping Temperature
90 - 100 °C / 194 - 212 °F on up-and-down and platen machines
150 - 170 °C / 302 - 338 °F on cylinder machines
170 - 220 °C / 338 - 428 °F on rotary stamping stations
| | |
 |
Labelling
Labelling
For a striking appearance
| | |
 |
Thermal Transfer Ribbons Color Ribbons for Every Purpose
Desktop or inline printers, flat head or near edge head - our program of Thermal Transfer Ribbons covers the suitable quality for every type of printer and almost every substrate. The formulas are free of heavy metals in accordance with the European standard EN 71 part 3, and based on a large choice of colors open up almost unlimited creative possibilities.
Individual Support
KURZ attaches great importance to flexibility. Customized designs, individual roll lengths, widths, cores and markings, test runs on different printers and substrates are possible. Our company-owned R & D department sees to detailed consideration of special demands.
Easy to dispose
The polyester carrier along with its coatings means that KURZ Thermal Transfer Ribbons are easy and safe to dispose of. They are not subject to ordinances governing hazardous materials and may be disposed of in the same manner as regular household waste according to DIN 38414/S4.
| | |
 |
TOUCHWOOD®
TOUCHWOOD® is a dry transfer finish with thin layers of protective top lacquer, decorative and adhesion coats all super-imposed onto a polyester carrier. During the application process, the combination of heat and pressure causes the lacquer package to separate from the carrier film, the heat-activated adhesive allows the whole package to adhere perfectly to the substrate to form a permanent bond. Unlike other decorating techniques, TOUCHWOOD® transfers the lacquer layers only and not the carrier film which is rewound and subsequently disposed off.
TOUCHWOOD® - the advantages:
TOUCHWOOD® offers a real alternative to commonly used decoration techniques
TOUCHWOOD® is comparable to a high quality lacquered surface in appearance
TOUCHWOOD® allows your furniture to stand out from the crowd when compared to conventional finishes
TOUCHWOOD® adheres almost perfectly to your part without unsightly seams | | |
|
|
|
|
Leonhard Breitenbach GmbH
|
|
 |
Calender, Mixing and Smoothening Rolls
Calendering, pressing, mixing and smoothening for these manufacturing processes, precision rolls are used in order to guarantee that the final products have the optimum properties.
It is obvious that rolls used for these purposes must meet extremely high standards, since the quality demands for production, converting and treatment of materials in continuous runs can only be achieved using rolls of maximum precision with respect to geometry, runout and surface finish.
Throughout the world, machine and equipment manufacturers as well as end-users involved in the processing of paper, foils, plastics, rubber etc. are our customers. All sizes of rolls are supplied in any design which may be required.
Through close co-operation with our customers we are fully familiar with their requirements. By purposefully gearing our production range and services to suit our customers' needs, we are able to develop and provide products now, which will meet future demands.
Rolls produced by Breitenbach are manufactured to comply exactly with customers' specifications or they are designed and produced in close co-operation with the end-user. Mechanical and thermodynamic strains are taken into account.
One-hundred-percent inspection is of great importance to us. Each manufacturing step is fully documented, because complete quality assurance is a matter of course for us. Research and development are considered as means of constant improvement of materials, processes and service, and these processes are continuous.
| | |
 |
Coating and Doctor Rolls
Coating, painting, impregnating of materials in continuous runs such as paper, cardboard, plastics and metal foils, textile fabrics and non-wovens, this is the range of application for our rolls. Whenever materials in continuous runs are processed, high-precision coating rolls are needed, in order to meet the high quality standards which are specified for all final products. The slightest deviation in cylindricity and runout may lead to significant differences in the coating quality and thickness. The more precise the roll, the better coating quantity and uniformity specifications can be met. When calculating the savings for one production year or even for the service life of the rolls, the investment in roll precision will pay off.
At Leonhard Breitenbach GmbH, the standards for quality and precision are extremely high. This has made us the market leader for this product range on a worldwide basis.
| | |
 |
Crushing Rolls
Grinding, refining, squeezing, crushing, flaking these are tasks putting rolls into focus as the most important tool. Highly precise crushing rolls made by Leonhard BREITENBACH GmbH are, amongst other applications, used for preparing the following products:
foodstuff including luxury foods
animal feed
pharmaceutical products
colours
fertilizers
ceramics and stoneware
BREITENBACH crushing rolls enhance the efficiency and profitability of various production processes in several respects. On the one hand, maintenance intervals are significantly extended without affecting reliability. This means longer machine cycles without interruption, and the repair costs are cut down to the required minimum. Reduction in energy consumption during grinding is another important benefit offered by our rolls. Furthermore, we have continuously developed our products and adapted them to actual market requirements, in close cooperation with renowned mill and plant manufacturers.
This dialogue in partnership along with our experience over many years makes BREITENBACH a reliable partner specialising in the field of roll manufacture for all crushing applications. | | |
 |
Heat Transfer and Chill Rolls
Heating and cooling. The production of paper, foils, plastics, rubber etc. in continuous runs usually requires thermal treatment of the material during the production process.
Whether during manufacture, converting or processing, a correct roll temperature with least tolerance is vital.
In order to guarantee constant product quality and properties, the standards set for both heat transfer and chill rolls are extremely high.
With regard to planning and design, we place our trust in our in-house research department. Thermodynamic simulation and calculation is made, on the basis of which design engineers develop individual solutions. This enables us to design and to manufacture heat transfer and chill rolls which are characterised by an extremely uniform distribution of temperature on their surface.
Controls and checks accompany the complete production process and guarantee a consistently high quality level.
| | |
|
|
|
|
Leon Engineering A.S.
|
|
 |
Industrial Scales
Crane Scale Pyrrhus - L | | |
 |
Industrial Scales
Platform Scales Beta 1- 2 - 3 | | |
 |
Industrial Scales
Floor Scale M 40 | | |
 |
Weighbridges, Truck Scales
The TS-1100 is a new, transportable, steel weighbridge, truck scale an innovative design, which offers everything the users expect: Perfect weighing performance, strength, easy installation and maintenance, therefore a profitable investment. | | |
|
|
|
|
VACMAGIC
|
|
 |
Dies and moulds , Vacuum moulds
Easy installation taking just 1/2 an hour on the first installation and can be re-installed only 10 minutes.
Fixtures and fittings can be changed as quickly as 15 seconds.For regular jobs the tools can be left set in machine so this job could be reset in less than 1 minute. Longer running jobs could be set up at less labour intense periods i.e. evening shift, weekend or if an operator goes sick the machine could be kept productive for virtually the whole shift.
Running costs
Based on an Ingersoll rand uni-10-115 7.5 kW compressor capable of 42 cfm which would cost 30p an hour run our unit uses 2cfm and would cost less than 2p an hour to run continuous. We actually have a fixture demo unit which runs perfectly off a £70 screwfix compressor.
Vacuum Chuck The vacuum chuck works on the same principle as the pallet changer. This unit is for use mainly on manual milling and grinding machines. This unit has a steel base to enable its use on magnetic chucks. Easy to change silicon 0-ring. (see animation below
| | |
|
|
|
|
Leitz GmbH & Co.KG
|
|
 |
Boring
Leitz covers the whole programme of boring tools for all common machines. No matter what application, the answer which drill to use can be found in the Leitz boring programme.
Producing precise and tear-free holes on boring machines requires precision dowel drills. The Marathon dowel drill is of the highest quality by far increasing the boring performance of standard dowel drills. Diamond-tipped drills are suitable for highly abrasive materials like acoustic ceilings or used as a hinge boring bit. The Levin-type drill is designed for boring deep holes without intermittent chip clearance. Rounding the program, Leitz offers all kinds of special drills like stepped drills, plug cutters or countersunks. | | |
 |
Clamping systems
Leitz offers clamping and adaptor systems to position and connect tools to nearly all machines in the woodworking industry. Clamping systems which are perfectly tuned to the tools are the precondition for optimum results.
Leitz with the complete range of tools and tooling systems for processing wood and plastics offers suitable, precise and safe adaptors for all standard or special machines either in stationary or through-feed technology. The tool seatings are equipped with the necessary adaptors for the task and the machine and are suitable for the whole machining process. Leitz standard and special clamping systems stand out because of their high precision and give the user various processing methods with high flexibility and safety.
| | |
 |
Hogging
One of the most important tasks in panel processing is sizing. Untreated or pre-sized panels are cut accurate to size and shape. This often influences the quality of the final product. The extensive range of Leitz hoggers includes cutter, segment, compact, TurboWing and folding hoggers with tungsten carbide or polycrystalline diamond cutting edges for efficient processing of various types of materials on all types of machines. | | |
 |
Planing
Planing creates chips. Cutterheads and planerheads by Leitz guarantee perfect surfaces and high efficiency. The Leitz planerhead program offers an efficent solution for all applications, whether pre- or finish planing, whether on standard planers, automated planers or high-performance planers.
As well as conventional knife clamping systems, the Leitz precise quick clamping systems reduce set-up times to a minimum.
Maintenance-free Hydro-clamping systems with special cutting geometry mean the highest planing quality at high feed speeds on high-performance machining centres. By the way, Leitz offers the world's only resharpenable planing cutterhead with quick clamping system and a constant diameter eliminating machine adjustments - VariPlan. | | |
 |
Profile tooling systems
The market requirements for profile tooling systems are varied: on one hand some parts are produced in large numbers, on the other small batches of many components. It is too much to expect every company to have a complete set of tools for each profile or if the tool would outlast the life of a profile. Here flexible intelligent tooling systems are required which help the user achieving cost-effective production. Leitz offers solutions for all kinds of applications whether it be for windows, doors, furniture or mouldings.
| | |
 |
Routing
Leitz offers an extensive range of router bits for stationary router machines with or without CNC, for portable routers with collet chucks or threaded shank. Leitz has the right tool with the optimum cutting material for all applications and materials, tipped tungsten carbide, tungsten carbide turnblades, solid tungsten carbide, or tipped diamond.
The complete routing programme includes tools for sizing, grooving, or profiling of solid wood, board materials or plastics.
Needless to say, Leitz has the adaptors from the tool to the machine in SK, HSK design with or without clamping chuck seating and shrink chucks for up to n.max 36,000 RPM.
Hobby, craft or industry - Leitz has the solution. | | |
 |
Sawing
Leitz developed a wide, high quality circular sawblades program for solid wood and panel processing. The sawblades are produced with cutting edges either of tungsten carbide or polycrystalline diamond to considerably increase the quality of workplaces, the cut quality and the environment of the performance for the applicants.
Besides the extensive standard sawblades program, Leitz offers a large selection of thin-kerf circular sawblades for the processing solid wood, and a range of low noise circular sawblades for wood derived materials. | | |
|
|
|
|
Leistritz Thommen GmbH
|
|
 |
Automation solution
Automation solution | | |
 |
burnishing machine
Burnishing machines with rolling force up to 40 kN
| | |
 |
Burnishing machine 40 kN
Burnishing machine for rolling rotationally symmetrical parts,
as plunge process or through process in each case.
A variety of burnishing heads are available as accessories:
- Diameter range: 1.2 -4 mm
- Diameter range: 4-20 mm
- Diameter range: 12-32 mm
or special rolling heads for:
e.g.:
- lettering
- jointing
- bead rolling
| | |
 |
Profile Rolling machines
Compact rolling machine for versatile use:
Knurling
Thread rolling
Burnishing
as plunge process or through process in each case
Automation solutions
CNC solutions for difficult materials
| | |
 |
Tools and accessories
Tools and accessories | | |
|
|
|
|
LISSMAC Maschinenbau und Diamantwerkzeuge GmbH
|
|
 |
Aluminium-Grinding machine
Edge rounding and deburring of aluminium
Aluminium-Grinding machine
Deburring and edge rounding in one pass on both sides of aluminium.
Reduce your processing time compared to conventional deburring machines up to 60 %
The essential benefits
Deburring and edge rounding of aluminium work piece up to 20 mm thick.
Dry operation- no cords by emulsion on the plates
The operation of the work pieces on both sides saves cost-intensive turn-over alternatively double operation of the work pieces.
Machine deburrs all internal and external edges.
Will even deburr sheet covered in protective film without damaging the film
Easy and safe operation with minimal maintenance.
Equal tool strain
Infinitely variable feed speed
Compact and modular construction (less space needed)
Optimal aligned wet exhaust receivable
| | |
 |
Deburring System SBM-GS.jpg
Reciprocal deburring and edge rounding in only one processing step | | |
 |
Grinding machine SBM - S.jpg
The only system which deburrs and rounds off corners in steel and stainless steel etc., in one step. Available with optinal vacuum device. | | |
 |
Oxide film removal
LISSMAC SBM-B automatic steel brushing machines remove the oxide film at inner and outer contours of laser-treated steel sheets in only one step. | | |
|
|
|
|
LOEMI GmbH
|
|
 |
Metal Swarf and Cooling Lubricant Recycling Units
Metal Swarf and Cooling Lubricant Recycling Units
Models LRA-150 E and SEA-2400 / LRA-3000 | | |
 |
Process Engineering Units explosion-proof
All LÖMI units are client-specific – they are developed and manufactured according to your needs. We will gladly make an offer for a unit solving your process engineering tasks!
LÖMI manufactures, among others, the following explosion-proof units:
LRA-100
Rectification units
Small column units
Units for production of
Bio-Alcohol / Bio-Ethanol
Biodiesel (small local units, developed by LÖMI in a research project funded by "Deutsche Bundesstiftung Umwelt" (German Federal Environmental Fund))
Units for
Recycling of model waxes from lost-wax casting (in cooperation with Fraunhofer-Gesellschaft)
Waste water purification
| | |
 |
Units for Injection Molding Debinding Metal and Ceramics Injection Molding
Debinding Units by LÖMI
The Debinding procedure is an important step in the injection molding process chain
Shaping – Debinding – Sintering.
Depending on your desired throughput capacity, our system consists either of one unit with integrated distillation functionality (EDA) or of two separate units (EBA plus external distillation unit LRA).
| | |
 |
Units for Solvent Recycling.
lra_250_2g_Units for Solvent Recycling. | | |
|
|
|
|
Loeser Maschinenfabrik GmbH
|
|
 |
Centerless grinding and polishing
12 Station belt grinding and mirror polishing line with 8 belt heads and 4 angled buffing stations. Complete material handling to packing system and final storage of the finished and plastik wrapped product in a bundle unload system. Bundle load systems with load capacity over 1 metric ton. | | |
 |
Centerless grinding and polishing
Quick and easy operation with computer controls and pressure controlled grinding. Wear compensation on buffing and polishing wheels. Extended comsumable life with pressure control.
Applications:
Surface improvement and conditioning for : plating, descaling, decorative grinding, finishing, linishing, degreasing, cleaning, calibrating, deburring, satin finishing, brushing, polishing, mirror finishing, superfinishing, microfinishing, removing defects, edge rounding, levelling, decor finish, precision cutting, slaggrinding
Workpiece and parts:
tubes, bars, pipe, profiles for furniture industry, decorative stainless, shop interior, engine components, axles, precision engine parts, paper tubes, fiber and kevlar tubes, golf shafts, stainless tube, heat element, door handle, peeled bar, hydraulic cylinder rod, telescopic cylinders, chrome bar, steel bar, boiler tube, rods
| | |
 |
Flatgrinding
Quick and easy operation with computer controls and pressure controlled grinding. Wear compensation on buffing and polishing wheels. Pressure control maximizes the life of the consumable items.
Applications:
Surface improvement and conditioning for : plating, descaling, decorative grinding, finishing, linishing, degreasing, cleaning, calibrating, deburring, satin finishing, brushing, polishing, mirror finishing, superfinishing, microfinishing, removing defects, edge rounding, levelling, decor finish, precision cutting, slaggrinding
Workpiece and parts:
Strip, tubes, squares and profiles for furniture industry, decorative stainless, shop interior, engine components, sintered metal parts, punched, laser cut, sheet metal, stamping, double disc ground parts, textile parts, ceramic parts,
| | |
 |
Roll grinding and center type grinding
Rollgrinding machines turn the workpiece on driven rolls and center type machines hold the part between center,cone or chuck and tailstock. Between centers tight tolerances can be achieved and heavy stock removal can be applied also on light parts. The roll grinding machines with the roller bed are easy and quick to load and unload and can handle parts without center. On both systems the grinding head is travelling along the workpiece.The heads can be configured with belt grinding, polishing, stone grinding, superfinish and microfinish with tape as well as with lapping stones
Applications:
Surface conditioning prior to surface coating or plating. Finishing of coated surfaces like HVOF spray coatings, chrome plated rolls, rubber coatings and ceramic coatings. Stripping of hard materials like ceramic or chrome plated printing rolls for quick rework. Fine superfinishing of rotogravoure rolls prior to copper plating or engraving. Grinding, polishing, superfinishing and microfinishing of pressure rolls, sleeves, anilox rolls or printing rollers used in the graphic industry.
Hydraulic cylinder surface preperation for extended life times of the product lip seals and o-rings.
Tolerance grinding and grinding to specific shapes in the HSD machines. Decorative grinding and preperation of special surface textures for increased life time of doctor blades in printing machines. Descaling and removing of turning marks prior to ultrasonic testing for billerts and steel rolls and bars for steel works. Therefore machines with roller bed are most suitable.
Microfinish down to Ra < 0.004 µm on mirror polished rolls for the film and foil industry. Polishing operations for the rolls used in paper mills.
Workpiece and parts:
paper rolls, rotogravoure rolls, cylinders, printing rolls, sleeve rolls, billets, drums, rubber rolls, steel work rolls, calander rolls, anilox rolls, ceramic rolls, HVOF rolls, granit rolls, telescopic cylinders, axles, hydraulic bars, tubes, pipes...
| | |
 |
Superfinish machines
The shape of the workpiece and the desired surface to superfinish determins the machine used. The use of microfinish tape, honing stone or both in combination give the result in superior surface quality and geometry. We offer centerless systems, superfinish between centers, plunch superfinishers and other microfinish machines.
...learn more about these finishing technologies
Applications:
Surface improvements after belt grinding to Ra <0,004µm.
High demand to on wear resistant coatings. Superfinish on extremly hard materials with diamond tape. Honing of hydraulic parts and axles, removing the spin characteristics on stone ground sealing surfaces, improved bearing surface, for reduced wear of seals, reduced stip slick effect. Superior surface texture compared to roller burnishing. Superfinish incorporated in automated production cells as stand alone systems or superfinish heads used in many stone grinding systems from Hercules, Naxos, Waldrich, Voith. Use in the paperindustry, military, sience, racing. Simple exchange of the abrasive enable for easy to reach finishes. To remove high peaks on steel rolls or finest superfinishing to mirror surface on foil rolls and pressure rolls.
Workpiece and parts:
Rolls for magnetic foil production and high gloss foils, print rolls, rotogravoure cylinders, stretch rolls, rubber rolls, sleeves, steel work rolls, cast iron rolls, granit and ceramic rolls, HVOF spry coatings, rolls for paper mills, form rolls, hydraulic parts like telescopic cylinders and bars and rams, axles, gear shafts, balancers, crankshaft, camshaft, piston rings, piston pins, valves, shock absorbers and many more ...
| | |
|
|
|
|
Lutz GmbH & Co. KG
|
|
 |
Coatings
LUTZ Blades – Hard and frictionless coatings for extended lifetime and better blade performance
What applies to our materials, also applies to our coatings: there is no standard solution!
Instead, our experts advisors will recommend to you precisely the right coating for your specific cutting application.
Your benefits of LUTZ highperformance coatings include
Higher cutting speed, blade lifetime and process output
Improved cutting quality (e.g. through less edge build-up with film)
Better edge protection due to less friction and heat
Reduced cutting start-off or downtime during blade changes
The LUTZ coatings range includes the following choices:
TiN TiC TiCN TiAlN
ZrN DLC CrN Teflon®PTFE
Based on our many years of manufacturing and coating experience we will be pleased to recommend you the coating that improves your cutting application. Please contact our expert staff for further assistance!
| | |
 |
LUTZ Blades - range of materials
There is no single perfect material. Many factors are involved in selecting exactly the right material to match your cutting application. Skill and experience are necessary to know what material best suits you for your application, environment, process, etc.
Our goal is to provide you a blade that gives you the maximum cutting quality at the most cost efficient price. Material selection is an important part of this equation. With that in mind, Lutz is happy to provide the following chart as a guide in the best material selection for the job.
| | |
 |
LUTZ Blades – Sharpness
Geometry and tolerances
Triple-bevel grinding
Application-specific cutting-edge configuration
Cutting edges can be anything from "razor-sharp" to "defined blunt"
Grinding processes
There are numerous grinding processes, including some for multi-sided blades
The grinding parameters are designed to match the geometry and material
Automatic in-process gauging of key parameters
Coatings and materials
The hardening process and material used are adapted to match the cutting application
Hard-material and frictionless coatings
Stainless steel, tungsten carbide, HSS, ceramic and others
Please contact our expert staff for further assistance!
| | |
 |
Packaging systems by LUTZ – more than just a wrapper
There is hardly another product on the market with such a high level of safety awareness as blades. The greatest risk is obviously where end-users are at work with unprotected blades.
This is where we see an urgent need for our own creativity to create packaging systems which meet two needs: to make the application as safe as possible for the worker and to promote sales of the product.
| | |
 |
Rapid prototyping
LUTZ Blades – Rapid prototyping
Do you need to test a blade design you are developing within a few days?
LUTZ-Engineering and Product Development Department has the solution: Rapid prototyping and Manufacturing.
Using our Rapid prototyping Approach we design and develop your custom blades within few days in production quality without the expenses and risk of a large production run!
Your benefits of LUTZ Rapid prototyping include:
Pre-launch samples within a few days
Maximum flexibility
Smallest batch sizes
Efficient, accelerated product development
Development and optimization prior to series launch
LUTZ Blades has what you expect and more!
Broad choice of expertly picked materials
Blades in every conceivable shape and size, even odd shapes
CNC based grinding and cutting
Electronic inspection and measurement of critical requirements Heat treatment know-how
High performance coatings
| | |
|
|
|
|
Luna Verktyg & Maskin AB
|
|
 |
CNC Controlled Machine for 0,5-3mm Sheet thickness (Steel)
Characteristics of the Luna MBC 8344 CNC rolls:
CNC-control with the capacity to store 200 programs. Pre-bending and final bending in one cycle. All four rolls are driven. All axis are programmable. All movements are mechanical for highest accurracy. Can bend complicated elliptical shapes. Rolls mounted in inter-changeable cassette system. Adjustable crowning of the lower roll. | | |
 |
MBA (4126)
Manually operated bending rollers with centerless ground rolls dia. 25 to 45 mm, which are asymmetrically placed. The sides of the machine are produced from solid aluminium and anodised. The stand is made from steel chanel. The setting of the bottom and bending rolls is carried out by means of handwheels. The bending roll can also be set diagonally for cone bending. The top roll can easily be swung out for the removal of finished workpieces.
| | |
 |
MBC 8268 CNC
The MBC 8268 rolls are designed to meet the requirements for longer CNC rolls for tight radius bending. The machine is designed with a welded steel frame and cast guides. The design with three rolls mounted independently in separate guides enables high productivity and easy adjustment of the rolls. These functions as prebending, bottom and bending rolls. The top roll is mounted above the middle roll e.g. a four-roll machine with symmetrically placed rolls.
In order to control the bending result over the working length, the machine can be equipped with hydraulic crowning supports for the lower roll. This is carried out by three support blocks with four pressure bearings. The crowning is adjusted with a hand pump.
All four rolls are driven in order to prevent scratches on easily damaged sheets from slipping rolls. The movement of the three lower rolls is carried out by lead screws.
The four-roll system eliminates the need for any intermediate handling of the sheet between pre-bending and the final bending. This ensures high repetition accuracy as well as a rapid and rational production.
When the bending is finished the lock clamp on the right hand side opens to allow removal of the pent part. This function can be eliminated in the program if not required.
| | |
 |
MBT (8264)
MBT (8264) is motor-powered and delivered complete with motor 220/380 V 3-phase as well as foot-operated forward and reverse switch with a protective casing – protection form IP54. MBT (8264) can also be equipped with emergency stop with wire as well as brake motor.
| | |
|
|
|
|
LUMERA LASER GmbH
|
|
 |
ps-laser HYPER RAPID 25
ps-laser HYPER RAPID: It uses a novel LUMERA LASER amplifier concept to reach higher average power for high through put applications in ps-laser micromachining!
Please contact us for details, sales[at]LUMERA-LASER.de
| | |
 |
ps-laser HYPER RAPID 50
ps-laser HYPER RAPID 50: 50 W @ 1000 kHz, options for harmonics | | |
 |
RAPID
The RAPID series of picosecond lasers are designed for industrial microprocessing; they offer a new level of precision and versatility.
The RAPID series - integrated into a work station - can ablate (micromill) any material without thermal side effects, without force onto the work piece and with high precision (µm-range lateral, about 10 nm depth control).
The RAPID consist of a sealed, compact laser head and a power supply; it only requires an ordinary mains connection.
The internal cooling system makes it independent from environmental conditions.
The included intuitive software controls all laser functions via internal industrial PC; an optional DLL allows to control the laser via external net work.
The laser output consist of 10 ps-pulses at 1064 nm with excellent beam quality (M²<1.2) for ideal focussing.
The pulse energy varies with pulse repetition rate (30 µJ @ 0-10 kHz up to 4 µJ @ 500 kHz, 2 W).
The ps-pulses (or programmed pulse sequences) can be triggered internally, externally on demand or externally gated with an internally set repetition rate.
Options are available
to generate 532, 355 or 266 nm pulses, or pump an OPG for tunable radiation
to lock the pulse energy (independent of repetition rate ) to a programmed value
to synchronize the ps-pulse to an external clock
The RAPID is designed to operate reliable and stable for long maintenance free periods (coolant change after 6 month, inspection after 12 month recommended).
| | |
 |
SUPER RAPID
The RAPID series of picosecond lasers are designed for industrial microprocessing; they offer a new level of precision and versatility.
The RAPID series - integrated into a work station - can ablate (micromill) any material without thermal side effects, without force onto the work piece and with high precision (µm-range lateral, about 10nm depth control).
The SUPER RAPID is an amplified version of the RAPID. It consist of a sealed, compact laser head and a power supply; it only requires an ordinary mains connection.
The internal cooling system makes it independent from environmental conditions.
The included intuitive software controls all laser functions via internal industrial PC; an optional DLL allows to control the laser via external net work.
The laser output consist of 10 ps-pulses at 1064 nm with excellent beam quality (M²<1.3) for ideal focussing.
The pulse energy varies with pulse repetition rate (200 µJ @ 0-10 kHz up to 20 µJ @ 500 kHz, 10 W).
The ps-pulses (or programmed pulse sequences) can be triggered internally, externally on demand or externally gated with an internally set repetition rate.
Options are available
to generate 532, 355 or 266 nm pulses, or pump an OPG for tunable radiation
to lock the pulse energy (independent of repetition rate ) to a programmed value
to synchronize the ps-pulse to an external clock
The SUPER RAPID is designed to operate reliable and stable for long maintenance free periods (coolant change after 6 month, inspection after 12 month recommended).
| | |
|
|
|
|
LUKAS Hydraulik GmbH
|
|
 |
Hydraulic cutters
Hydraulic cutters | | |
 |
Hydraulic rescue equipment.
Hydraulic rescue equipment. | | |
 |
Hydraulic units
Hydraulic units | | |
 |
Telescopic cylinders.
Telescopic cylinders. | | |
|
|
|
|
LUGER GmbH Werkvertretungen & Service
|
|
 |
HB-Therm Series 5 Module units and increased heating capacity
New power range of HB-Therm’s latest “Series 5” temperature control units to be shown in Friedrichshafen. | | |
 |
Motan presents extensive product range at the Fakuma
Motan dryer METROLUX A 80 with integrated conveying system – first time on display at Fakuma.
| | |
|
|
|
|
Lubas Maschinen und Geräte Vakuumhebezeuge
|
|
 |
Lifting device
A fully automatic unpiling installation. Copper electrodes are lifted and supplied by means of a tipping mechanism. Remarkable is the feature which allows to process piles of relatively bad quality and extremely rough surfaces. Besides, it does not matter, whether the electrodes are longitudinal or radially corrugated, folded or smooth. The installation works in a three-shift work and is located at the feed of raw materials of a manufacturing chain. Already during the planing phase of this installation, the operational safety was of course taken into consideration. | | |
 |
Pile storage
Fully automatic piling system for the sorting and unloading of a manufacturing chain of steel panels to four shipment terminals. A special feature is the variance of tapes-widths from 700 to 3,800 mm (~27.3 to 148.2 in.) and thicknesses starting at 4 mm (~ .16 in.). The processable length of the tapes starts at 1,200 mm (~ 47in.) and reaches to 21,000 mm (~820 in.).
The maximum weight of the plates is 15,000 kg (~33,000 lbs.). The system is designed for working in a three-shift work at the end of a manufacturing chain. On account of the intensly automated production process, it was given great importance to the reliability and a nearly maintenance-free operation.
| | |
 |
Plate deloader
A fully automatic lifting and storing installation to unload a manufacturing chain to several shipment terminals. A special feature of this installation is the variance of tape-widths going from 700 to 3,400 mm (~27 to 132 in.) and thicknesses starting at 4 mm (~ .16 in.).
The processable length of the tapes starts at 1,200 mm (~47 in.) and reaches up to 17,000 mm (~663 in.). Also asymmetrical and parallel lifting are possible.
The maximum weight of the tapes is 6,000 kg (~13,200 lbs.).
The tapes are flooded with water. The vacuum system is designed in a way that manual drainage is unnecessary. The installation is designed for running in a three-shift work at the end of a manufacturing chain.
On account of the intensively automated process, great importance was put on the reliability and the nearly maintenance-free operation.
| | |
 |
Universal vacuum-unit UniTravMini
The UniMini is designed for the use up to about 1,000 kg (~2,200 lbs.). Different suction cups or groups of suction cups, but also cross beams can be easily attached. Barrels, wooden boards, plates, entire bundles etc. are tranportable. The device will always be adapted to your specific demands. For higher capacities, please look for the series UniTrav. | | |
 |
Vacuum cross beam UniTravMega, designed for work in sloping positions
This vacuum cross beam is suitable for loads up to 20,000 kg (~44,000 lbs.) with dimensions ranging from 1,000 x 1,000 mm (~39 x 39 in.) to 3,700 x 12,000 mm (~144 x 468 in.) and thicknesses between 4 and 50 mm (~ .156 to 1.95 in.). In the picture shown, additional hooks have been added for the transportation of bundles, in order to avoid time consuming set-up times.
Optional pedestals for putting-down can be attached to the cross beam, if requested. This series of cross beams can be equipped for outside use as well.
| | |
|
|
|
|
LTG Aktiengesellschaft
|
|
 |
Compressing of Fine Particles
| | |
 |
For any air technology requirement LTG High-Performance Fans
For any air technology requirement LTG High-Performance Fans LTG offers a full range of high-performance fans for industrial, process and room air technology: - Axial fans for gaseous media with low solids contents - Centrifugal fans with single or double-sided suction for gaseous media with low solids contents - Centrifugal conveying fans with single-sided suction for gaseous media with high solids contents - Tangential fans for gaseous media without solids content, for conveying media temperatures of -40 to +800 °C. | | |
 |
High Pressure Humidifier Type HPH
Function
With the High Pressure Humidifier water in the air stream is diffused extremely fine under pressures of up to 130 bar (1.885 psi). With this process the air can absorb more of the sprayed water than conventional adiabatic cooling systems. An insignificant residual amount of water condenses on the drop separator and is removed by drainage.
Advantages:
energy and water savings
suitable for hygienic applications due to use of only fresh water
precise control over the entire humidity range
maintenance-friendly
super saturation possible
| | |
 |
LTG Collector System, Process Level Separating + Compacting
Separating and Compacting of Coarse Particles
Function
The air stream with particles enters the unit through the inlet, passes through a perforated sheet metal cone and leaves through the lower outlet. The airborne solids deposit on the inside of the perforated sheet metal cone and are continuosly stripped off by an auger, pushed downwards against a diaphragm, compacted and discharged to the outside.
Advantages
separator and compactor in one unit
continuously working principle
high material and air volumes
pressureless material discharge
no pressure fluctuations in the suction system
sturdy construction, requiring very little maintenance
| | |
|
|
|
|
LTA Lufttechnik GmbH
|
|
 |
Air suction and cleaning
Air suction and cleaning are made at source. | | |
 |
Dust- and Chipfilter
Dust- and Chipfilter | | |
 |
Exhaust air
Exhaust air coming from a group of machines is collected at one point where it is then decontaminated. | | |
 |
Hall air cleaning
This application can be used for open machines or in case special requirements regarding air purification are made. | | |
 |
Piping
Design and installation of complete piping systems | | |
 |
The exhaust air is collected via a tube
The exhaust air is collected via a tube which conveys it to a central device where it's purified | | |
|
|
|
|
LOSMA S.p.A
|
|
 |
AIR FILTERS
For the air cleaning we offer many different models of mist collectors: centrifugal (in the versions turbine, single centrifuge and double centrifuge), static filters and specific units for very high throughputs or centralized systems. All the models are ready for being arranged with a range width of modules of pre and after-filtration therefore to resolve in specific way any type of problem. Our mist collectors can be directly installed on the machine tools. They remove the polluting from the source, and can easy be moved, and used again on other machines or switched off in case they are not used. | | |
 |
ASPIROFILTER
Ten models to give the perfect response to every requirement. Throughput from 800 to 2800m³/h to provide the right solution for everything from small lathes to huge machining centres. | | |
 |
COOLANT FILTERS
The Losma Liquid Filtration Range is made up of various types of filter to cope with all eventualities. Losma’s expertise in this area shows in all its products, from the simplest of cloth filters to more complex integrated systems with several filtration stages. This know-how also means that tailor-made solutions and one-off designs can be proposed for special customer requirements. The Liquid Filtration Range comprises seven product lines, DETEX, DEMAG, DECOM, RIVER, SKIM; SPRING and MASTER Series which can all be equipped with refrigeration systems to order. | | |
 |
DARWIN
Air filter for mists and vapours from soluble or neat oil for machine tools.
The DARWIN series, patented and available in 4 models, covers throughput range of 600 to 3.000 m³/h. This means that it can cope with widely differing applications, from small lathes to grinding machines or complex machining centres.
Darwin with turbine (T): filtration of air containing soluble oil mist with the presence of heavy particulate.
Darwin with single-centrifuge (M): filtration of air containing mists of soluble and neat oils with presence of small quantities of particulate.
Darwin with double-centrifuge (D): filtration of air containing mists and vapours of soluble and neat oil with presence of small quantities of particulate | | |
 |
GEMINI
Air filter for oilmist, micro-mist, vapours and smokes for machine tools.
Gemini is available in 3 sizes, 700 to 2.000 m³/h, with 3 standard configurations each (filtration efficiencies from < 95% to < 99,95%).
Gemini has a particular patented design, which makes maintenance operations and filters replacement very easy and represents the perfect solution for all cases where the customer in little spaces has the need of both a pre and post-filtration. | | |
 |
MODULAR FILTERS
All models in the DARWIN and ASPIROFILTER series can be coupled to special units that provide real and proper superfiltration. Their use permits many permutations and gives performance levels of up to 99.7% efficiency. These special units can be added at any time, even after the installation of the air filter.
Pre-Filters
GUARD: is a two stage (metal and synthetic) pre-filter for coarser particles and significant quantities of metal dust and oil mist.
Post-Filters
SYNTHESIS: an electrostatic post-filter for eliminating oil mist particles, smoke and micromists.
CLIPPER/NITOR: is a glass fibre post-filter for the absolute filtration.
MICROFILTER: is an activated carbon post-filter for unpleasant or noxious smells. | | |
|
|
|
|
Lorch Schweisstechnik GmbH
|
|
 |
Lorch inverter plasma cutting units
Lorch inverter plasma cutting units.
Z 70 and Z 110.
4 times hotter than the sun itself.
Incredible speed, durability, mobility. | | |
 |
Lorch M 3030
Lorch M 3030 automotive.
MIG-MAG welding,
and MIG-brazing all in one. | | |
 |
MIG-MAG welders
The 2nd generation M series has taken on a cult status.
The MIG-MAG welding system for thin sheet and lightweight steel construction. | | |
 |
TIG-welders
H 150
Ideal for electrodes up to 4 mm.
Higher powered with 150 A.
Good for TIG welding
| | |
|
|
|
|
LOOMIS PRODUCTS Kahlefeld GmbH
|
|
 |
Continuous Piston Extruder
Model CPE - 40V - 6 x 20 | | |
 |
Isostatic Dry Bag Presses
Isostatic Dry Bag Presses | | |
 |
Loomis Laboratory Piston Extruders
Loomis Laboratory Piston Extruders | | |
 |
PISTON EXTRUDER - 232 DT MODEL
PISTON EXTRUDER - 232 DT MODEL | | |
 |
piston extrusion tooling
piston extrusion tooling
| | |
|
|
|
|
LOKE−Engineering
|
|
 |
Distance meter
Measurement principle:
The measurement principle of the ACCURA gauges is optical triangulation. The principle is based on a laser light that is emitted on an object in a predefined measuement range. The detector used, is a CCD array, which consists of light sensitive cells (pixels). When the light causes a reflection o the measurement object, some pixels on the CCD array are activated via a lens system. Depending on which pixels are activated the distance to the object can be calculated. By software the resolution in the calculated distance value is 1/8 of a pixel. All ACCURA gauges use this method of measuring distance | | |
 |
LCG - LOKE Crane Guidance Systems
LCG - LOKE Crane Guidance Systems | | |
 |
LMC-J-0310
The laser distance-meter LMC-J-0310 is robustly engineered especially for industrial applications. It works at distances up to 3000 m. Up to 300m and more (depending on target reflectivity) no special reflector is needed. Measuring values are provided continuously via the integrated RS422/RS232 or analogue 4..20 mA interfaces. As option, ProfiBus and SSI interface is available. In this way the device is providing position and velocity information during the production process.
The LMC-J-0310 can be used in distance and speed measurement mode. All measuring parameters are adjustable.
The high measuring speed allows the distance measurement of extremely fast moving objects.
The operation principle of the LMC-J-0310 is time delay measurement, the measuring time is adjustable between 0,5 and 1000 ms (a special version with 0,1ms is also available). Within a fraction of second one distance measurement is obtained by means of several hundreds or thousands of individual measures.
| | |
 |
LMC-M-M2D-LASER for Profile-Contour Scanning
Method of operation
The Scanner M2D provides 2-dimensional measuring of profile heights. The measured objects may consist of various materials. A laser line is projected onto the target and the distance to several points of the object is measured by triangulation. The Scanner is suitable for the geometric profile recognition and distance measurement. The height (Z-axis) by distance (X-axis) is measured. The result is the contour of the object at the point of measurement. Every 20 ms a complete scan of 283 points of measurement, or every 40 ms a scan with 566 points of measurement is done. The
measurement range works from 5...1200 mm (X-axis) and 8...600mm(Z-axis). Please see overview chapter 10.1 “Scanner datasM2D/ M2D-W”. | | |
 |
PreciCura
PreciCura can be used as a single distance sensor or directly connected with another sensor for Thickness or Profile measurement. The PreciCura is designed for industrial use.
PreciCrura is a cost effective, accurate measurement sensor.
Non-contact measurement gives benefits such as no wear of the sensors or on the measurement object
PreciCura 3 point mounting bracket option makes it easy to install the sensor. In harsh environment the Air Knife option can be used to Keep the window clean.
PreciCura gives you three interfaces simultaneously: Analogue, Serial RS232C and CAN-bus. PreciCura use standard industrial connectors, 5- and 8-pin M12 with locking.
The PreciCuraSet option is a Windows® based setup software. It configures the sensor and display measured values.
| | |
 |
Precise - Robust - Reflectorless
Multi-Bus
Measuring distances with millimeter accuracy
Accurate Positioning
Motion detection / Contour detection
Level gauging
Measures surfaces up to 1250 °C
Width measurement without additional equipment
The LMC-J-0050-x is an opto-electronic distance measuring module for industrial application. The device uses a contact less measurement technique based on comparative phase measurement with amplitude modulation. The laser diode has a divergence of 0.6 mrad for measurement with pinpoint accuracy.
| | |
|
|
|
|
Logosol GmbH Holzbearbeitungsmaschinen
|
|
 |
Logosol M5
Logosol M5 – In Its Best Form
The original Logosol Sawmill – fully functional at an optimal price.
M5 IS A REFINED VERSION of the original Logosol sawmill, introduced in 1988, which has now reached its optimal function. M5 is the most sold model of all Logosol sawmills, so there is no doubt that it is a good sawmill. If you are not going to saw that much, or if you for instance are only going to use the sawmill for log house moulding, you can save some money by choosing a Logosol M5. It lacks some features that the M7 has, however, and it cannot be combined with the new accessories that have been specially developed for M7.
| | |
 |
Logosol M7
The M7 Sawmill Will Make Your Life More Complete
With the Logosol Sawmill you can saw a tree on site on a woodland plot, in the lengths and dimensions of your choice. Because it is lightweight and easy to use, you can easily take it with you without the help of others.
Since our first sawmill appeared on the market in 1988, its construction and design have been improved. This has resulted in the perfect oneman sawmill. Over 20 000 Logosol Sawmills have already been sold around the world. At the same time, the sale of spare parts is insignifi cant, and that says quite a lot.
Mobile or Stationary
Many of our customers have stationary Logosol sawmills, but one of the advantages with the sawmill is that you can take it to the place where the timber is, e.g. to the forest or to your cottage. Once you have done that, all that is left for you is to fell a tree and then process it into boards, planks and beams.
Impressive Precision
The accuracy of our sawmill is very impressive. You can saw whatever you wish, from beams for log frame structures, to millimetre thin sheets. The Logosol Sawmill can process logs from any tree you will fi nd in a forest or in a garden: oak, aspen, apple-tree, cherry-tree, and so on. The sawmill is easily handled by one man. You are only limited by your imagination.
Professional Results at Once
Logs are rolled onto the mill from a log table with the working height of 55 cm. They are then lifted up to saw height with a turn of the hand-operated crank. The sawed boards lie accessible at waist height and are easy to lift off. Hence the Logosol Sawmill not only saves your time, but also spares your back. The saw carriage slides effortlessly along a stable guide rail. Visible and audible gradations permit the adjusting of the sawmill’s settings to be both easy and accurate. All instructions can be read in the manual that comes with each sawmill. The Logosol Sawmill is made from anodized aluminium, which is resistant to corrosion, is lightweight, and yet very durable. The smooth surface of the guide rail has a low friction coeffi cient, is easy to clean, and requires minimal maintenance service. Logosol utilizes a thinner guide bar and chain, which contributes to signifi cantly faster sawing. The result of using the thinner guide bar and chain is that the cut taken is only insignifi cantly wider than the one taken by a circular saw. One sharp chain saws approximately fi ve normal sized logs before it needs to be re-sharpened.
High Production Capacity
The Logosol Sawmill is run with an ordinary power saw of a minimum capacity of 60 cc. The typical saw unit is a Stihl MS660 92 cc or a Husqvarna 385XP 85 cc. With such an equipment you can saw 5 metres per minute from a 6 inch thick beam. The powerful electric saws Logosol E5000 and E6000 nearly double the speed. If you use the Logosol Bandsaw you can even saw 16 metres per minute. But technical data is one thing, working in practice is another. The logs shall not only be sawed up, but also be stacked, new logs need to be rolled to the saw and, above all, you will need a coffee break now and then. Our customers say that one operator alone can produce between two and three cubic metres sawed lumber in one working day – and we believe them! | | |
 |
Logosol SH230
The Soloplaner Rips, Planes, and Profiles in one Single Operation
The Golden Axe – the award for the best wood processing machine presented jointly by the Swedish Land Magazine, Elmia Trade Fair and The Forest Owners Association.
Logosol SH230 – a Must for every Carpenter and Craftsman.
THE SOLOPLANER SHOULD STAND in the shop of every sawmill owner and carpenter. It is a versatile machine which squares, rips and profiles. When you have got used to the high capacity and the possibilities of the machine, the Soloplaner will be indispensable.
The Soloplaner planes the board and cuts it in the right width in one single operation. What enables this, is the 230 mm wide cutter with a circular saw positioned immediately next to it. The cutter and the circular saw rotate at a speed of 6000 rpm, which gives a quality result both on the planed and the sawn surfaces. In Logosol’s Moulding Knives Catalogue you can look at several examples of profiles you can produce. The profile knives can be utilized at the same time as the planer knives and the circular saw.
With the Soloplaner you can produce notch and groove on up to 5 cm wide panels. If you want to have wider dimensions you make a so-called overlapping half-tongue.
Planing and Squaring
The most common application of the Soloplaner is to plane and square boards. The board gets the right width and gets planed simultaneously. If you want to process all four sides, you just run the board twice through the machine. Height and width adjustments are made in two simple operations.
| | |
 |
PH260
Logosol PH260 | | |
|
|
|
|
Logopak Systeme
|
|
 |
Bulk Labeling
Logopak’s bulk labeling system is an intelligent bar code labeling system for product identification of unevenly shaped products, such as sacks, in industrial applications. Our machines' compact modular design and sturdy construction are impressive. Enclosures with trap doors can be provided to protect the systems from dust in the environment.
The integrated print engine with a print width of 8.5” (216 mm) can be used for real-time direct thermal and thermal transfer printing. It also allows serial labeling of consistently sized products. In addition, the system is equipped with a telescopic arm applicator with a stroke length of up to 20” (500mm). This makes it ideal for use with products with varying heights. The arm is combined with a hinged vacuum pad to hold the label and a roll-on device for continuous labeling applications. For use in the paper industry where labels are applied to rolls varying from 16” to 60” (406 mm to 1,524 mm), the system utilizes a telescopic arm with hinged applicator.
For cylindrical objects such as kegs, casks or steel bottles, Logopak has developed a very special system that applies labels to the top of the unit between the valve and the edge of the cylinder. These systems are intended specifically for operation in modern breweries. Thermal transfer bar code labels are printed real-time and applied to the top of the object while the object is standing still or in motion. By using the product arrestor and a laser scanner for checking the barcode, the system ensures that no unit leaves the filling station without a perfect label.
Enclosures can be provided which have trap doors to protect the systems from leaking units when the system is not applying labels.
| | |
 |
Case Labeling
Logopak manufactures a full line of systems in order to meet various case labeling requirements. All are intelligent, high-performance labeling systems designed for barcode technology and product identification in industrial operation. Logopak stands apart from the competition due in large part to the sturdy, modular design of our machines. Our integrated print engine can be used for direct thermal and thermal transfer printing and allows serial labeling in continuous operation for high-speed packaging lines without problems.
With an extensive array of applicators, whether labeling the front of the case, the side, from the top down, or even from the bottom up, Logopak has the answer to your automated print and apply application challenges. Machines can be supplied with enclosures to allow them to resist the rigors of harsh environments. For faster lines, larger off-winds for labels and thermal transfer ribbon are available, with the label stock and thermal transfer ribbon supplied in matching lengths.
| | |
 |
Label Printing
In some applications, a label printer is all that is needed. For example, a pallet label printer applicator installation can utilize a label printer when the automatic label printer applicator is off-line during maintenance.
The Logopak VLP 210 is an intelligent printing system using barcode technology for product labeling. The VLP 210 excels through its sturdy mechanical construction designed for 24-hour continuous operation. It is equipped with print heads that deliver 8 or 12 dot print resolution (200 or 300 dpi). These print heads are extremely service-friendly thanks to the Logopak quick-change system -- and they require no readjustment when installed. Each printer can be driven either externally via a serial data connection or on its own via the integrated intelligence. They are designed for use in preparing label formats and as a back-up system to automatic large format label printer applicators.
For the production of labels with embedded RFID tags, an RFID tag programmer can be supplied. An RFID Starter Kit is available for those who are starting RFID tagging programs but are not yet ready for automated equipment, such as in a “slap and ship” operation.
| | |
 |
Labeller
Labeling machines | | |
 |
Mail Order
Logopak has developed and builds an extensive line of machines to meet the requirements of mail order labeling. All of our systems are intelligent high-performance labeling systems designed for bar code technology and product identification in industrial operation. Logopak excels through the sturdy, modular design of its machine construction. The integrated print engine can be used for direct thermal and thermal transfer printing and allows serial labeling in continuous operation for high-speed packaging lines.
With its integrated machine control circuitry and communications ports, a Logopak mail order labeling system can quickly receive data and print and apply labels real-time at normal operational speeds. The TBH applicator system was designed primarily with mail order applications in mind, for both original shipment and returns handling. The labels are blown onto the top side of the trading unit by means of a telescopic applicator. The variable heights of the products are determined and the arm is extended the appropriate length to blow the label on. This can be done at speeds of up to 40 packages per minute.
Machines are often supplied with sturdy enclosures to allow them to resist the rigors of harsh environments. For faster lines, larger off-winds for labels and thermal transfer ribbon are available, with the label stock and thermal transfer ribbon supplied in matching lengths.
| | |
 |
RFID Labeling
Logopak RFID for Items and Cases
- Two Technologies in One Operation
Presenting an intelligent combination of proven Logopak printing technology with innovative RFID transponder technology.*
• Printing and coding continuously -- without stopping
• Speeds of up to 60 units/min.
• Smaller label gaps reduce material expenses
• Smaller label formats can be used
Logopak RFID allows the printing of self-adhesive labels in standard formats with clear human readable text and machine readable bar codes. The RFID tag integrated in the label can also be coded with variable data in the same operation. Currently, passive HF-transponders and UHF-transponders are being used. The coding process takes place in a split second with the visible data printed on the label and the electronic data stored in the RFID tag integrated in the label.
*Patent pending for this new Logopak RFID application technique.
| | |
|
|
|
|
LOFT Anlagenbau und Beratung GmbH
|
|
 |
DESTIMAT®
DESTIMAT® | | |
 |
DESTIMAT® NT
DESTIMAT® NT | | |
 |
Interface pretreatment
LOFT
evaporation plant
TYP DESTIMAT®
are the main item of a sewage processing plant conceived as a spot solution with a 100 per cent repatriation of the water as high pure destillat. You stand out due to high reliability and best values of the quality of destillat for absolutely maintenance-free business, our unconditional claim is high-quality execution as well as the quality of the components. | | |
 |
Special plant construction
Special plant construction | | |
|
|
|
|
Leistritz Produktionstechnik GmbH
|
|
 |
Machine Tools Division
We design and provide complex production units for economical and environmentally-sound manufacturing of screw threads and/or thread-like profiles. A customised modular design concept allows for individual solutions for specific problems, and includes complete finishing of workpieces.
Profile drawing machines and end finishing machinery complement the machine program. With our keyseating machines we offer performance-orientated solutions ranging from a simple feather slot to complete internal gear cutting. In addition to the machinery program we also offer tools that have been developed for optimal machining applications.
| | |
|
|
|
|
LEISTER Process Technologies
|
|
 |
Automatic wedge welding machine for civil and tunnel construction
COMET
The world's smallest and lightest compact machine with a integrated control box. The special wedge with optimized heat transfer guarantees top welding performance.
| | |
 |
Brushless hot air blower
MISTRAL
Its qualities become especially apparent where large quantities of heat in a limited space are required. It is so handy that even the most inaccessible places can be reached. Thanks to its new brushless motor, maintenance is reduced to an absolute minimum. That simply makes it a reliable, cost-effective and powerfull device.
| | |
 |
High speed automatic wedge welding machine
ASTRO
The world's fastest hot-wedge welding machine welds at up to 5 meters per minute — and, of course, the welding seams are also perfect at this speed.
| | |
 |
Hot air welding machine
UNIPLAN E
For efficient hot-air welding of industrial fabrics the UNIPLAN E is ideal. A guide roller keeps the tool precisely on course. Its digital display shows set and actual values of temperature and welding speed. The heating is electronically controlled.
| | |
 |
Laser welding machine
Globo Welding
The state-of-the-art welding process is based on the Contour Welding principle and generates the perfect appearance in terms of the welding quality. This launched process onto the welding technologies of plastics enables a welding method without any elaborate clamping device. Accordingly, the existing limitation on 2 dimensional welding process is eliminated. Consequently, the welding process can be extended to 3D-welding.
| | |
 |
Laser welding machine
NOVOLAS MICRO
A special mask welding system with supreme precision.
NOVOLAS TM MICRO welds fine structures as narrow as 100 µm. Any imaginable shape can be welded with a positioning accuracy down to 2 µm. Masks can be exchanged with ease, allowing for high flexibility. NOVOLAS TM MICRO can be operated as a manual workstation or integrated for mass production.
| | |
 |
Screw extruder for plastic welding
FUSION 2
Extrusion welding is carried out in wide variety of areas and is becoming evermore demanding. Leister offers the right tool for all plastics applications in process equipment manufacture and civil engineering. The specialist obtains everything with us from a single source: Devices from 0.3 to 6.0 kilo per hour. Convince yourself
| | |
 |
Semi automatic welder
TRIAC DRIVE PID
Horizontal, vertical, diagonal. This tried and tested semi-automatic welding machine can be used universally. The increased welding speed compared with hand welding gives rise to higher productivity.
| | |
 |
Side channel blower
ROBUST
Versatile and operable at high ambient temperature up to 60°C. Despite its small dimensions, ROBUST is a real powerhouse. It offers great flexibility thanks to its extensive range of accessories.
| | |
 |
Smallest hand welding tool with digital display
WELDING PEN R
The latest generation of tools presents itself as extremely handy. Because the air supply comes from a separate blower, the Leister WELDING PEN R reaches into the most inaccessible places. It also displays the welding temperature digitally.
| | |
|
|
|
|
Leifeld Metal Spinning GmbH
|
|
 |
Spinning and planishing machines
Spinning and planishing machines | | |
 |
Technische Daten WSC 700/6 H
Technische Daten WSC 700/6 H | | |
|
|
|
|
LANXESS AG
|
|
 |
Performance Polymers
Butyl Rubber
Polybutadiene
Rubber Technical
Rubber Products | | |
|
|
|
|
Lantek Sheet Metal Solutions
|
|
 |
Lantek Expert Cut is a CAD / CAM system
Lantek Expert Cut is a CAD / CAM system specially designed to automate the programming of sheet metal cutting machines (oxicut, plasma, laser, water jet). It is the result of more than 20 years experience in close collaboration with both manufacturers and users of these types of machines. It perfectly combines machine technology with customers’ programming and management requirements. | | |
|
|
|
|
Langzauner GesmbH
|
|
 |
belt sanding machines
belt sanding machines | | |
 |
edge sanding machines
edge sanding machines | | |
 |
LZK 4S - The double sided
Rear sanding station with slewable sanding table 0 – 45 º.Miter end stop with infinitely angle-adjustment and adjustable ruler. | | |
 |
LZK SD - Through-feed milling and sanding
Front side - Picture optional: Pre milling unit, Groove milling unit, Electromotive pressure beam height adjustment
| | |
 |
Veneer Guillotine Hydromatic FPS
OPTION: FPS 800 Hydromatik is equiped with an own control and hydraulic unit and can also inserted as a single machine
| | |
 |
Wood-edge gluing press
Wood-edge gluing press with hydraulic side pressure equipment and installed material chute. | | |
|
|
|
|
Lang Ma | |
