|
Cyklop GmbH Transportgutsicherungs-Systeme
|
|
 |
per straps
per straps | | |
|
|
|
|
COILTEC Maschinenvertriebs GmbH
|
|
 |
Rolling mill plant
Rolling mill plant as well as the corresponding auxiliary machines for processing ferrous and non-ferrous metals form the core activities of our company. They are the centre of our product range for both second-hand and new machines.
| | |
|
|
|
|
Cognex ID Products
|
|
 |
id products
DataMan™ 7500 Series | | |
|
|
|
|
CODERE SA Industrial furnaces
|
|
 |
Batch furnaces
Fields of application
- Solution annealing of light alloys
- Annealing of aluminium parts for the automobile industry
- Maturation / aging of nonferrous alloys
- Treatments up to 650°C
| | |
 |
Pot furnace
Austenitizing, carburizing, carbonitriding
- Annealing, tempering, brazing (Annealing of beryllium bronze and brass
- Nitriding, nitrocarburizing, oxynitriding
- Treatments up to 1100°C
| | |
|
|
|
|
Clyde Material Handling Ltd
|
|
 |
| | |
 |
Bulk material conveyors
Bulk material conveyors | | |
 |
Industrial vacuum cleaners
Industrial vacuum cleaners | | |
|
|
|
|
CLEVERTECH S.R.L.
|
|
 |
Automatic storage system for pallets
Automatic storage system for pallets | | |
 |
Empty/filled glass jars palletising/depalletising lines
Empty/filled glass jars palletising/depalletising lines | | |
 |
Lock and key making machine
Lock and key making machine
| | |
 |
Magnetic head pusher palletisers for empty cans
Magnetic head pusher palletisers for empty cans | | |
 |
Packs handling and palletising lines
Packs handling and palletising lines | | |
 |
Pallets conveying lines
Pallets conveying lines | | |
|
|
|
|
Cleveland Präzisions Systeme GmbH
|
|
 |
Machine Grinding Technology
Machine Grinding Technology | | |
|
|
|
|
Clemco International GmbH
|
|
 |
Surface treatment products
Blast Machines
» Big Clem
» Remote Controls
» Operator - Safety - Equipment
» Nozzles
» Blast Hose, Holders & Couplings
» Suction Gun
» Dust free blast equipment
» Internal Pipe Cleaning and Pinting Systems
» Wet Blast Equipment | | |
|
|
|
|
Classen apparatebau Wiesloch GmbH
|
|
 |
Biermann Heaters
up to 400°C, with salt solutions up to 500°C
Fuels
• all standard fuel oils
• all standard fuel gases
• flammable dusts
• special oils and off-gases
Range of Capacity
• 1,000 kW to 25,000 kW
Design
• single-pass upright with vertical up-firing
• Biermann heater may be designed according to any required specifications of customer in detail
Heat Transfer Media
• organic heat carriers
• salt solutions
• high-pressure hot water
• pressured gases
Special Characteristics
• Biermann heaters have a large combustion chamber and are therefore especially suited for combustion of special fuels. The high intake allows the use of atmospheric burners without combustion air blowers. High efficiency levels are attained through the use of downstream economizer units and high-
efficiency combustion air preheaters. The space requirement (floor area) for this equipment is very small. The specific equipment design is very flexible due to the various standards of the chemical and etrochemical industry.
| | |
 |
Dust & Fines Combustors
For thermal fluid heating up to 350°C with single and multiple-pass boilers
Range of Capacity
• 300 kW to 10,000 kW
Fines and multiple fuel combustion systems with integrated pilot and ancillary burners for natural gas and heating oil.
Combination of fines combustions with grate firing is possible.
| | |
 |
Electric Heaters
For liquid and vapour phase operation
Range of Capacity
• 4 kW to 10,000 kW
Design
• tube bank construction
• as horizontal vaporizer
Special Design
• design for installation in hazardous areas
• immersion heating elements with sleeves
• continious regulation
• TPC-systems without internal heating rods for "any temperature at any pressure and any medium"
| | |
 |
Reciprocating Grate Systems
For hot gas generation thermal fluid heating and use in stream and hot water boilers
Fuels
• wood residues, chips, bark
• rice husks
• solid biomass
Range of Capacity
• 5,000 kW to 50,000 kW
Proven Design
• automatic charging through hopper without bottlenecks
• tipping grate above deashing shaft
• automatic deashing
• PLC control system
• automatic firing regulation
Special Execution
• Fuel storage and supply facilities
• flue gas treatment systems
• turn-key installations
• injection systems for particulates and dust as primary and secondary fuels
| | |
 |
Thermal Exhaust Facilities
For neutralisation of pollutants by thermal oxidation
Range of Capacity
• 500 to 150,000 Nm³/h
Reaction Temperature
• 700 to 1,250°C
Pollutants
• organic steam in exhaust air or exhaust gas inert gas or steam in various concentrations
Design
• as combustion chamber with interior lining
• as all-steel combustion chamber
• each with integrated or external waste heat recovery heater
Additional Fuels
• natural gas
• heating oils
• special fuels
Special Design
• facilities for combustion of explosive gas mixtures
| | |
 |
Underfeed Stoker
For thermal fluid heating up to 350°C
Fuels
• wood residues, chips, bark
• solid biomass
Range of Capacity
• 300 kW to 10,000 kW
Design
• standard execution contruction with upright three-pass heaters
• internal ash collection box for
• manual deashing
• multi-cyclone dust precipitator
• automatic firing regulation
Special Design
• hydraulic grate vibration system
• mechanical water-cooled deashing system
• PLC control system
• pilot burner for automatic start up and back-up burner for supplement firing
• ancillary dust firing
• combustion air preheating for damp fuels
| | |
|
|
|
|
Clariant International Ltd
|
|
 |
colorants,optical brightening agents and chemicals
colorants,optical brightening agents and chemicals | | |
|
|
|
|
Claas GmbH & Co. KG
|
|
 |
wire
Cold heading wire
Through-hardened bearing steel
Quench and temper spring steel wire
Tool steel for cold-working
Wire from unalloyed steel | | |
|
|
|
|
CJSC GRASYS
|
|
 |
Air separation unit
Air separation plants
From our general experience, we know that the basic components constituting the ambient atmosphere are oxygen (21%), and nitrogen (78%).
GRASYS Air Separation Units are provided to disengage each one of these components with the scheduled purity at the output. When it comes to the air separation process it is worth talking of the two major ends of this method, namely:
- the production of gaseous nitrogen
- the production of gaseous oxygen. | | |
 |
Carbon dioxide purifier
Hydrocarbon plants
GRASYS hydrocarbon separation plants are produced with the use of the company brand-new proprietary membrane capable of delivering substantial benefits in comparison with other gas separation technologies.
Due to their cost-effectiveness combined with required longevity GRASYS membranes may be efficiently used in industrial applications where operating conditions excludes the adoption of other polymer membrane types. Besides, this membrane gas separation technology has a modular structure allowing expansion or modification of operated systems and prompt response to any changes in feed composition during the entire life cycle of a given source (e.g. increasing CO2 concentration or changing hydrocarbon flow composition in a natural gas field) — and all this without unnecessary additional costs. The description below features some of the primary applications of GRASYS gas separation systems | | |
 |
Hydrogen plant
Hydrogen Plants handle synthetic gases and water-containing gases that serve the purposes of hydrotreating and hydrocraking in the oil refining industry; ammonia production, fat, coal and oil hardening; in the chemical industry where hydrogen-bearing gas mixtures are featured; as well as in the metal industry.
| | |
 |
Methane purification unit
Hydrocarbon plants
GRASYS hydrocarbon separation plants are produced with the use of the company brand-new proprietary membrane capable of delivering substantial benefits in comparison with other gas separation technologies.
Due to their cost-effectiveness combined with required longevity GRASYS membranes may be efficiently used in industrial applications where operating conditions excludes the adoption of other polymer membrane types. Besides, this membrane gas separation technology has a modular structure allowing expansion or modification of operated systems and prompt response to any changes in feed composition during the entire life cycle of a given source (e.g. increasing CO2 concentration or changing hydrocarbon flow composition in a natural gas field) — and all this without unnecessary additional costs. The description below features some of the primary applications of GRASYS gas separation systems.
| | |
 |
Nitrogen plant
Nitrogen Plants and Stations
Membrane nitrogen plants
The most advanced, completely automated plants designed for production of nitrogen from atmospheric air.
Nitrogen purity — up to 99.95%, Recovery — up to 5000 nm³/hr
Adsorption nitrogen plants
Up-to-date stationary automated systems designed for gaseous nitrogen production from air.
Nitrogen purity — up to 99.999%, Recovery — up to 5000 nm³/hr | | |
 |
Oxygen plant.
Oxygen Plants and Stations
Adsorption oxygen plants
High-performance plants designed for oxygen production from atmospheric air and cylinder filling.
Oxygen purity — up to 95%, Capacity — up to 3000 nm³/hr
Membrane oxygen plants
Fully automated membrane plants designed for air oxygenation.
Oxygen purity — up to 45%, Capacity — up to 10000 nm³/hr
Cryogenic oxygen plants
Plants for deep air freezing designed to produce both liquid and gaseous oxygen from air.
Oxygen purity — up to 99.9%, Capacity — up to 30000 nm³/hr
| | |
|
|
|
|
Cinpres Gas Injection Ltd
|
|
 |
Gas preparation systems
A complete range of highest quality industrial gas generation and compression systems for un-interrupted gas supply. | | |
 |
GENERIC GAS CONTROLLER FEATURES
Precise pressure control using State of the Art Gas Control Module
Integral in-line gas filters
Independent control of up to four GCM's on up to two moulding machines
Full closed loop pressure control
Start delay plus 5 control phases per cycle, each with ramp and hold time, giving a total of 11 timed control steps per cycle.
Maximum standard operating pressure 345 Bar (5000 psi)
Full audible and visual alarm with safety interlock system.
GCM control cables available in a range of lengths | | |
|
|
|
|
CIMBRIA SKET GmbH
|
|
 |
Veg. Oil Extraction-Screw Presses
Veg. Oil Extraction-Screw Presses Roller Mills and Stack Cookers Screw Presses Refining Plants Oleo chemistry | | |
|
|
|
|
Chronos Richardson GmbH
|
|
 |
dosing systems
dosing systems | | |
 |
loose fill bagging systems
loose fill bagging systems | | |
|
|
|
|
Christof Reinhardt Maschinenbau
|
|
 |
Cut-off saws CROSS CUT AND AUTOMATION
Precise, speedy positioning - even if the wood is wet or frozen.
Hardened guideway, designed for the highest load.
Double holding system - which is capable of controlling different work pieces, even round cross-sections.
Single- or package processing of the work pieces.
Processing of the entire work piece with minimum waste. | | |
|
|
|
|
Christian Gierth GmbH
|
|
 |
Tooling
Cutting tools, coated
Slot millers | | |
|
|
|
|
Coko-Werk GmbH & Co. KG
|
|
 |
Injection Moulding
The individual requirements of injection-moulded parts determine the manufacturing method. Constant improvements to and modernisations of this technical process are the basis for our high standard of work and services. We have made a name for ourselves as a system supplier. | | |
|
|
|
|
COMAS SpA
|
|
 |
Biscuit and wafer filling machines
Vertical and Horizontal Injection Machines | | |
 |
Biscuit Depositor
Moulding machines | | |
 |
Layer Cake Equipment
Decorating equipment | | |
 |
Pie Equipment
Pie Equipment | | |
|
|
|
|
Comau S.p.A.
|
|
 |
Metal cutting Machine tools
Metal cutting Machine tools | | |
|
|
|
|
CTU Conzepte Technik Umwelt AG
|
|
 |
inside partly loaded catalytic converter
inside partly loaded catalytic converter | | |
 |
flue gas cleaning
flue gas cleaning | | |
 |
hazardous waste treatment
hazardous waste treatment | | |
|
|
|
|
CTI SYSTEMS S.A.
|
|
 |
Docking systems
The system consists of four (4) dock modules: 2 taildocks, left right one side equipped with the hoist, 2 windocks left right, 2 landing gear docks left right, 2 hydraulic docks left right. The dock can be used on the whole A320 family (A318 to the A 321). Equipped with numerous features the A320 dock modules successfully commissioned at Air France Paris in March 2007 allow aircraft access for heavy maintenance. The entire tail and wing sections are covered in most comfortable and ergonomic way for the entire A320 aircraft series (from the A318 to the A321). The passway and workplatforms at tail dock allow not only heavy duty application and high platform loads, but a | | |
|
|
|
|
Cryo Store BV
|
|
 |
per straps
per straps | | |
|
|
|
|
Cross Hüller GmbH
|
|
 |
specht
specht | | |
 |
transfer lines
transfer lines | | |
 |
xs series
xs series | | |
|
|
|
|
Crippa S.P.A.
|
|
 |
tube bending machines.
tube bending machines. | | |
|
|
|
|
CRAFTSMAN TOOLS LTD
|
|
 |
COROMANT CAPTO® TOOLHOLDING
Sandvik Coromant Capto® is the first universal quick-change tooling system suitable for turning, milling, boring and drilling. Combining Coromant Capto® toolholders with CNC machines shortens set-up times and increases your productivity. | | |
|
|
|
|
COVENTRY TOOLHOLDERS LTD
|
|
 |
HSK
HSK | | |
 |
STEEP TAPER
STEEP TAPER | | |
 |
STRAIGHT SHANK
STRAIGHT SHANK | | |
|
|
|
|
COSTA machinery GmbH
|
|
 |
Warehouse 1
used machinery | | |
 |
Warehouse 2
Warehouse 2 | | |
|
|
|
|
Cosberg S.p.A
|
|
 |
ADER BOWL FEEDERS
They are electroresonant circular vibrating bases.
The vibrations produced by the new Piezo technology allow:
Stable and constant feeding
Easy regulation of the optimal frequency
No intervention of technicians is required for the frequency adjustment
Eletricity consumption 70% less than electromagnetics systems
Easier product change. | | |
 |
ADER LINEAR FEEDERS
They are electroresonant linear bases.
The vibrations produced by the new Piezo technology allow:
Stable and constant feeding
Easy regulation of the optimal frequency
No intervention of technicians is required for the frequency adjustment
Eletricity consumption 70% less than electromagnetics systems
They are suitable for feeding small pieces. | | |
 |
ADERAF BOWL FEEDERS
They are high frequency electroresonant circular vibrating bases.
The vibrations produced by the new high frequency Piezo technology allow:
Vibrators with very small dimensions
High frequency vibrations
Centesimal level tollerances
Bowls machined with CNC
No intervention of technicians is required for the frequency adjustment
They can operate without dampers.
| | |
 |
DOUBLE MOVEMENT TRIPLE DRIVE
They are composed by a vibrating base on which 3 grooved-rails independent one from the other are fit. One of them provides the forward motion and the other two provide the backward motion. These grooved-rails are appropriately shaped so that the parts orientation is carried out on the forward motion of the linear. The grooved-rails are machined on CNC–machine tools for a better repeatibility and they are fit on the base by means of centering pins. They are suitable for feeding small pieces. | | |
 |
DOUBLE MOVEMENT TWIN FEEDER - PARALLEL FEEDER
They are composed by a vibrating base on which two grooved-rails independent one from the other are fit. One of them provides forward motion and the other one provides return recycling motion. These grooved-rails are appropriately shaped so that the parts orientation is carried out on the forward linear grooved-rails. The grooved-rails are machined on CNC-machine tool for a better repeatibility and they are fit on the base by means of centering pins. They are suitable for feeding small pieces | | |
|
|
|
|
CORNE Packaging Group
|
|
 |
Paper bags
Shop packaging, image vectors. Using appropriate, customized packaging, offers you the edge on your competitors. | | |
|
|
|
|
COPACO Gesellschaft für Verpackungen mbH & Co. KG
|
|
 |
Smart Packaging and RFID
Smart Packaging and RFID | | |
|
|
|
|
Coopbox Europe S.p.A.
|
|
 |
AERDRY ABSORBENT BARRIER TRAYS
B16-40 AERDRY 320 x 130 x 40 mm | | |
 |
AERPACK BARRIER TRAYS
1CA LIGHT 193 x 146 x 50 mm | | |
|
|
|
|
Conntronic Prozess
|
|
 |
Welding machines
Welding machines
| | |
|
|
|
|
Con-Slot Screens Development & Trading GmbH
|
|
 |
Con-Slot Screens
Screens | | |
 |
SCREENS
SCREENS | | |
|
|
|
|
Compar AG
|
|
 |
Industrial robots
Industrial robots | | |
 |
Linear modules
Linear modules | | |
|
|
|
|
CompAir UK Ltd
|
|
 |
screw compressors
screw compressors | | |
 |
vane compressors
vane compressors | | |
 |
piston compressors
piston compressors | | |
 |
portable compressors.
portable compressors. | | |
|
|
|
|
CHIRON-WERKE GmbH & CO. KG
|
|
 |
high-speed workpiece production.
high-speed workpiece production. | | |
 |
vertical cnc maching centres
vertical cnc maching centres | | |
|
|
|
|
Chemineer Inc
|
|
 |
Agitator
Chemineer Agitators are robust, simple and designed for ease of maintenance. The drive has a minimum of moving parts, while NC machining of the housing and the subassemblies ensures trouble-free interchangeability and precision parts mating.
Engineered for the ultimate in process compatibility, Chemineer manufactures a range of agitators to suit almost all applications
Available in drive sizes from 0.25 to 1,000 kW - even more for specialized applications. A wide selection of mounting methods, materials of construction, shaft seals, shafts, impellers and accessories can provide the best turbine agitator for virtually any process. | | |
|
|
|
|
CARBIDE A/S
|
|
 |
Floor treatment
Sanding disc for edge sander
For grinding and sanding floor edges and small surface areas.
Exclusively for use with edge sanders and only together with a rubber backing pad.
Size: Ø125 x ø 25 mm, Ø150 x ø25mm,Ø180 x ø25 mm x 0,8 mm
Grit: 14, 24, 36, 60 | | |
 |
Handtools
Hand-held Sanding Block
Time-saving and durable all-round hand-held sanding block with
interchangeable base. Made of nylon/fibre with ergonomic grip.
Replaces sandpaper and Carborundum stone.
Also for use with sandpaper.
Patent pending.
Size: 100 x 60 mm
Grit: 24, 36, 60, 80, 120, 180, 240
| | |
 |
Power Tools
Flat grinding disc for angle grinder
Designed for heavy-duty surface treatment and grinding of materials
mentioned below. Discs are available in several types and fit all standard angle grinders.
Size: Ø115 x ø22,2 mm, Ø125 x ø22,2 mm, Ø180 x 22,2 mm
Grit: 14, 24, 36
| | |
|
|
|
|
Capway Systems BV
|
|
 |
compact baking oven
To complete our product range Capway Systems have developed a compact baking oven, the “BakeStep” oven. This convection type oven with built in ZAP system (Zigzag Airflow Principle) and adjustable top / bottom heat diversion has been designed especially for crusty type products like baguettes, petit pains, Kaiser rolls, Schrippen, and so on.
Manufactured with steel, aluminium or stone plates the oven can also handle freestanding hearth baked products, for example artisan baguettes, ciabatta, hard rolls, pizzas and etc.
This vertical oven is the most compact system available and gives you a great efficiency of your floor space.
In combination with “CapStep” type proofers, coolers and / or freezers complete high capacity production lines can be installed in small areas.
By using the proven concept of a solid and reliable vertical elevator system, in combination with a very flexible indirect heating system, you can produce a wide range of products.
| | |
 |
Robo-Cap:
Robo-Cap: our specially designed bakery robot for bread production lines. | | |
 |
robots in bakeries
Capway Systems has been the pioneer in the application of robots in bakeries and was the 1st to do so in 1987. Since then the Capway RoboCap has become the benchmark for robots in bread production lines.
The RoboCap is a portal mounted robot especially designed for metering, storing and retrieving a wide range of baking forms, baking sheets and lids. In-house developed software and patented tooling complements the extreme effectiveness and flexibility of the RoboCap. | | |
|
|
|
|
Capital Machine International Corporation
|
|
 |
Capital clippers
Capital builds more types and sizes of cutters than any other manufacturer in the world. Whatever the material or the specific cutting requirements, from the thinnest material to metals; from 100 cuts per minute to 1000, Capital clippers perform!
You have a choice of cutting actions; straight with a cutting stick, angled with a shear bar, and even a sine wave motion. Capital clippers are available in sizes from 36" (91.4cm) to 213" (541cm) with knife openings up to 6" (15.2cm). We have mechanical and air operation as well as an optional 3 position delivery table for clipping packs of veneer. We offer the latest in laser lighting for assisting your operators to find the cut line and scanner sensors for operator protection.
Many options are available, contact Capital for assistance in determining how to solve your cutting problems!
| | |
 |
Capital flitch planer
The Capital flitch planer is available in 30" (76.2cm) and 39.5" (100.3cm) models, with or without an integrated groover. This massive machine will plane both the top and bottom of the flitch to provide a flat mounting surface and to remove the initial waste before the flitch even gets to the slicer.
The conveyor can be linked to your existing flitch movement system. A laser alignment light shows the operator where the cut line will be and allows precision preparation of the flitch. The variable speed drive allows the operator complete control of the movement of the conveyor and the safety circuits limit the speed of the conveyor as the flitch is being planed. Many other options are available, please contact us for further details.
| | |
 |
Capital hog
The Capital hog allows you to become more energy efficient by using your scrap veneer to provide fuel for your boilers. High quality wood waste generates more BTUs allowing your plant to become self-sufficient. Excess can be sold to makers of particle or flake board at a profit. In some plants, wood-fired boilers provide the steam for drying the veneer as well as for cooking the logs.
Additional steam could be used to generate electricity, so your Capital Hog doesn't cost you money, it makes important profits for you. Hogs can be supplied with either a hopper feed or conveyor feed to give you the flexibility to place the scrap hog where it assists your operation the most. Roller bearings and rugged construction means extra long life and freedom from down time.
| | |
 |
Capital Staylog Lathe
The Capital Staylog Lathe is a production machine, making 80 to 90 cuts per minute of veneer that is between 0.005" (0.127mm) and 0.165" (4.2mm). The thickness tolerance of the Lathe is 0.001" (0.025mm).
The Tilt Pressure Cap allows the operator to quickly clean away debris and to whet the knife. This reduces the downtime on each shift that would be required to maintain the equipment.
The Lathe is built with knife lengths from 125" (317.5cm) to 170" (431.8cm) and can take a flitch up to 30" (76.2cm) in radius. Two grooves are used to attach the flitch to the Staylog. The Reduced Core option can provide up to a 13% additional yield.
Specifications
72" (183cm) swing
Knife lengths - 170" (431.8cm), 150" (318cm), 125" (317.5cm)
Cuts from 0.005" (0.127mm) to 0.165" (4.2mm)
Grooving machines are available to quickly prepare the flitch for use with the hydraulic gripping dogs of the Capital Staylog Lathe. An option to add grooving knives is also available for the Flitch Planer.
| | |
 |
Slicers
Capital slicers are made specifically for the production of the finest face veneers in the world. Their precise, close tolerance cutting ability is demonstrated by the fact that they are the only slicers in the world capable of cutting veneer as thin as 0.005" (0.127 mm) and as thick as 0.250" (6.35 mm).
Our massive, over-engineered, heavy design has set the standard for the industry for generations. It is common for Capital Slicers to be in daily use for as many as 90 years.
Capital's patented Computer Lead System can save up to 25 minutes per shift when used with the patented Capital Flitch Master feed and thickness controls system.
The Capital slicer is available with knife lengths of:
118" (299.7cm)
165" (419.1cm)
185" (469.9cm)
213" (541cm)
225" (571.5cm)
The opening capacity and stroke sizes available are:
30" x 30" (76.2cm)
34" x 34" (86.4cm)
39.5" x 39.5" (100.3cm)
51" x 51" (129.5cm)
Many other options are available to customize your Capital Slicer, please contact us for more details.
| | |
 |
Vacuum flitch
Capital's new, improved vacuum flitch table eliminates shim sheets and increases productivity with 7 to 10% yield improvement. The seals are easy to install and will hold up longer due to their improved material. Blocking the flitches against the table is not required. Flitch loading times as fast as thirty seconds.
The vacuum flitch table is available with either remote extension dogs for cutting diamond back flitches or without extension dogs for flat cut flitches. Messy hydraulics are eliminated on the flitch table while new ideas decrease the amount of maintenance and improve the life of the pumps in service.
Contact Capital today and let us build one for you
| | |
|
|
|
|
Caotech B.V.
|
|
 |
CAO 1000 - ballmill refiner
The attrition ballmill type CAO 1000 is specially designed for the continuous fine grinding of cocoa liquor.
Capacities up to 1.200 kg/hr.
| | |
 |
CAO 2000 - ballmill refiner
The attrition ballmill type CAO 2000 is specially designed for the fine grinding of cocoa liquor, chocolate and compound coatings.
Capacities for a complete cocoa liquor grinding line are up to 3.200 kg/hr.
Capacities for chocolate and compound coatings are up to 1.200 kg/hr.
| | |
 |
CAO B2000
The installation type CAO B2000 is specially designed for the fine grinding, mixing and conching of chocolate, coatings, compounds and bread spreads. The combination of ball mill and mixer / conche is designed to perform mixing, grinding and conching of the ingredients simultaneously.
Capacities of 500 kg/hr, with an end fineness of 18 - 20 micron
| | |
 |
CAO B5
The attrition ball mill type CAO B 5 is specially designed for the fine grinding and mixing of small batches chocolate, coatings, compounds and bread spreads at lab scale sizes.
The batch capacity of the CAO B 5 is 5 kg
| | |
 |
CHOCOCON
The installation type CHOCOCON is specially designed for the fine grinding, mixing and conching of chocolate, coatings, compounds and bread spreads. The combination of ball mill and mixer / conche is designed to perform mixing, grinding and conching of the ingredients simultaneously.
Capacities of 170 kg/hr, with an end fineness of 18 - 20 micron
| | |
|
|
|
|
CANNON BONO ARTES
|
|
 |
Heat recovery boiler
Bono Energia Heat Recovery Steam Generators (HRSG) have found application in a wide range of industries where the cogeneration of steam and electricity is required, in order to obtain an independent power plant and negligible emission levels.
Bono is able to produce HRSG from gas turbines (both water tube and fire tube) or from engines; heat recovery thermal fluid heaters; turn-key plants.
The standard design of our HRSG allows a "package" modular system (where the boiler and the economiser are pre-assembled), which can satisfy many different needs. In this way both the installation and the startup are faster, cheaper and safer. The proven design and the accessibility of the boilers allow high efficiency, minimal maintenance and cost-effective operation.
| | |
 |
Industrial Process Water Treatment
It is widely common to make reference to process water treatment when water is considered as a raw material in an industrial process.
When water is a raw material, it has to strictly meet the requirements due to the concerned process in terms of purity, salinity, microbiological presence, pathogens, solids, turbidity, undesirable salts. ARTES Ingegneria (BONO Artes) is able to demonstrate particular experience in supplying process water treatment for the following industrial markets:
Beverages, Soft drinks
Food
Pharmaceutical
Textile
| | |
|
|
|
|
Cannon S.p.A.
|
|
 |
mixingheads
mixingheads | | |
|
|
|
|
Camspec Limited
|
|
 |
spectrophotometer
high specification visible spectrophotometer | | |
|
|
|
|
Camfil AB
|
|
 |
Air pollution control.
Air pollution control. | | |
|
|
|
|
CAMA GROUP
|
|
 |
Packaging Lines for Coffee
High speed packaging line composed of: a coffee capsules handling system, cartoning machine with special product transport conveyor, a wrap around packer and a case transport elevator.
Production speed: 140 cartons-boxes/minute. | | |
 |
Packaging Lines for Bakery
Packaging line for square bottom bags in display-box, composed of: forming machine, 2-axis robot and lidding machine.
Production speed: 250 bags/minut | | |
 |
Packaging Lines for Confectionery
Automatic line for packing flowrapped chocolate bars in display boxes composed of: forming machine, two axis robot with multiple pocket conveyor and lidding machine.
Production speed: 650 bars/minute | | |
 |
Packaging Lines for Dairy
Automatic line for tray packing of single or OTT sleeved. The line is composed of: forming machine, robotic loading unit, sleeving machine with lane divider and buffer.
Production speed: 68.000 bottles/hour.
| | |
 |
Packaging Lines for Ice Cream
Automatic packaging line capable of handling two product types, packed both in 3-flap lid boxes (up to 120 boxes/minute) and in preglued cartons up to 330 cartons/minute. The line is composed of an electronic glue forming and glue closing machine, a 4 axis robot, electronic continuous motion cartoning machine and a wrap-around machine.
| | |
 |
Packaging Lines for Pet Food
Automatic packaging line for aluminium/plastic trays composed of: a high speed forming machine, two 2 axis robots, a linear closing machine and a wrap-around packer.
Production speed: 600 trays/minute | | |
|
|
|
|
CAM-Service GmbH
|
|
 |
Flexible NC programming for beamshaped tools
Flexible NC programming for beamshaped tools | | |
|
|
|
|
CADWORK INFORMATIK SOFTWARE GmbH
|
|
 |
Cadwork 3D Modules.
cadwork - the 3D CAD/CAM system for all fields of timber construction | | |
|
|
|
|
C.S. MACHINERY CO., LTD.
|
|
 |
8 vetélős szövőgép
Model CS-8125 byl navržen pro vysokokapacitní výrobu dutých vláken na pytle pro cementárenský prùmysl;
je ideálním strojem pro dosažení úspor energie. | | |
 |
Általános termékinformációk
Spoleènost CS machinery Co., Ltd dodává všechna zaøízení pro závody na výrobu tkaných pytlù z PP/HDPE a
protlaèovací linky na fólie PET/PLA/PP/PS. Kontaktujte nás a získejte další informace. | | |
 |
Film-extrudáló gépsorok
A film-extrudáló géppel CD tokokat és általános célú vékony fóliákat lehet készíteni napi 8 tonnás mennyiségben;
beruházása nagyon gyorsan megtérül. Keressen bennünket a további részletekkel kapcsolatban. | | |
 |
Mini 6 vetélős szövőgép
Ušetøete 30 % nákladù na energii a zvyšte výrobu o 50 %. Výrobek je navržen tak, aby vyžadoval co nejmenší údržbu,
snížené procento odpadù. Stabilní výroba a ménì operátorù, i práce s nízkým denierem. | | |
 |
Szövet extrudáló gépsor egyrétegű szövetekhez
Protlaèovací linka na fólii, kterou mùžete provozovat tak, aby vyhovovala surovinám PET, PLA, PP, HIPS.
Zajištìná kvalita fólie a rychlá návratnost investic.
| | |
 |
Szövet extrudáló gépsor poharak gyártásához
Chcete vyrábìt kelímky? Hledáte vysokokapacitní protlaèovací linku na fólii za nízké poøizovací náklady?
Spoleènost CS je vám k službám. Kontaktujte nás a získejte další informace. | | |
 |
Szövőgép óriás zsákokhoz
Tkalcovský stav navržený na výrobu pytlù jumbo z prùmyslových tkanin a pro materiály urèené na provoz pod vysokou zátìží.
Nižší náklady na údržbu. Maximální šíøka tkaniny ve tvaru rukávu 2 m, šíøka rozprostøené látky 4 m.
| | |
 |
Tri-srew szövet extrudáló gépsor (háromrétegű szövetekhez)
Protlaèovací linka na fólie se tøemi šroubovicemi produkuje ideálnì 3vrstvé fólie.
Pokud hledáte stroj za nízké poøizovací náklady nebo na výrobu speciálních fólií, kontaktuje nás. | | |
|
|
|
|
C.K. Teknik A/S
|
|
 |
granulation system.
granulation system. | | |
 |
miniature recycling plant
Plastic miniature recycling plant | | |
|
|
|
|
C. Otto Gehrckens
|
|
 |
O-rings
O-rings | | |
|
|
|
|
C. Hilzinger-Thum Schleif-und Poliermittelwerk GmbH & Co.KG
|
|
 |
HT-Grinding- and Polishing-Tools
The product descriptions have been intentionally kept
brief, as the best application of a tool depends upon
many factors. These factors must be established initially:
- The condition of the raw material before and after grinding,
the type of metal, the compounds in use, the tool
pressures, the required surface, required properties of
the part to be processed are all of importance in choosing
the correct tool.
- If you supply us with information about your machinery,
the revolutions per minute that the polishing tools are
turning at, the dimensions, in other words, outside
diameter, width and bore of required polishing tool, we
can supply you with the specific solution and quotation.
| | |
 |
Rubber Rollers
Varied application options provided by a multifaceted mixing range
We meet the high standards expected of modern industrial enterprises. Our own research & development department, recipe development for optimum mixing applications and the combined experience of the entire Hilzinger-Clouth Group ensure that our customers receive
optimum problem solutions tailored to their engineering tasks. | | |
|
|
|
|
C. & E. FEIN GMBH.
|
|
 |
accumulator screwdrivers
accumulator screwdrivers | | |
 |
angle grinders
angle grinders | | |
 |
Belt grinding machines
Belt grinding machines | | |
 |
Core drilling machines
Core drilling machines | | |
|
|
|
|
Carl Cloos Schweisstechnik GmbH
|
|
 |
Robot systems
ROMAT®
Robot systems
Application technology
Branches
| | |
 |
Welding machines
MIG / MAG
TIG
Plasma
MIG/MAG welding torches
| | |
|
|
|
|
Carl Leipold Metallwarenfabrik GmbH
|
|
 |
CNC turned parts
CNC turned parts | | |
 |
Coaxial connectors
Coaxial connectors | | |
 |
screw machine parts
Automatic screw machine parts | | |
|
|
|
|
Carlo Gavazzi AG
|
|
 |
Relays
Solid State Relays | | |
|
|
|
|
Chemie Produktions- und Handelsgesellschaft GmbH
|
|
 |
adhesives
adhesives for packaging-labels | | |
|
|
|
|
Chemdet, Inc
|
|
 |
washers
turbodisc tank washers | | |
|
|
|
|
Cham-Tenero Paper Mills Inc.
|
|
 |
Digital Imaging
Qualimage Inkjet Products:
dynamic and universal
Qualimage is the competence centre for digital imaging within the Cham Paper Group.
Since 1998, we have been distributing high-quality inkjet products for various applications and markets throughout the world. Our product philosophy is aimed at delivering high quality and universality. We wish to offer distributors and customers a complete solution with a product that is available either as jumbo or equipped plotter roll. We invest in R & D activities and market research in order to offer our customers added value and to anticipate changes in this dynamic market sector.
| | |
 |
FlexPack
Secure, attractive and ecological:
Flexible Packaging Papers
Our flexible packaging grades ensure ease of handling, dimensional stability and good printability. Thanks to its natural properties, paper enjoys a high degree of consumer acceptance, as it is a renewable raw material. Environmental regulations are becoming more stringent worldwide and therefore paper provides an attractive, secure and ecological medium to pack with.
| | |
 |
Self-Adhesives
The connection between innovation and quality: Base Papers for Self-Adhesives
Every day, we find ourselves facing new challenges created by constantly changing demands in the fields of silicone base and label papers. Our sales consultants, development engineers and application technologists are, therefore, continuously co-operating with converters and applying their vast know-how in developing new grades. In some cases, they adapt the properties of existing papers to meet ever higher demands. In our mills, continual controls and A to Z knowledge of the production processes guarantee consistent quality to meet the highest requirements in every application.
| | |
 |
Technical
Custom-made solutions for your specific applications: Technical Papers
The more varied the requirements, the more unique the paper. Every one of our departments works for and with you. This also applies to the Technical Paper Department, where experts use their vast experience, instinctive grasp of market trends and precise knowledge of production processes to develop special grades for the most widely differing applications in accordance with your own specifications. Our experts work closely with you on these custom-made solutions – all the way to success
| | |
|
|
|
|
Cesare Galdabini S.p.A.
|
|
 |
material testing instruments
material testing instruments | | |
 |
systems for sheet metal forming
systems for sheet metal forming | | |
|
|
|
|
CERIM SpA
|
|
 |
shoe machinery
shoe machinery | | |
 |
shoe sewing machines
shoe sewing machines | | |
 |
Special machines for the shoe industry
Special machines for the shoe industry | | |
|
|
|
|
Center-Tech Armaturen GmbH
|
|
 |
butterfly valve
butterfly valve | | |
 |
flanged butterfly valve
flanged butterfly valve | | |
 |
high performance butterflyvalve
high performance butterflyvalve | | |
|
|
|
|
Centaur, Strapping Systems
|
|
 |
BATTERY STRAPPING TOOLS
Battery operated strapping tool for PET and PP strap.
Balea 05 / Balea 06 / Balea 07 models for different strap dimensions and required tensions.
| | |
 |
Pneumatci strapping tools for pet/ pp
Pneumatic strapping tool
Models PT1 and PT2 for PET and PP straps.
| | |
 |
Pneumatic strapping tools for steel strap
Pneumatic strapping tools for steel strap
Pneumatic strapping tools Mod. RLG and RLP for steel stra
| | |
|
|
|
|
CCL Label GmbH, Decoration for brands
|
|
 |
Label Pictures
Label Pictures | | |
 |
Shrink sleeves
Shrink sleeve
Shrink Sleeve ist ein "anpassungsfähiges" und flexibles Dekorations-
medium für leicht bis stark konturierte Container aus Kunststoff,
Glas und Metall. Es ermöglicht eine 360° Dekoration (top to toe
decoration).
Als vielgestaltige Dekorationsmöglichkeit ist das Shrink Sleeve-
Verfahren auch für Promotion-Aktionen wie Two for One, On Pack
Promotion, Twin Pack u.a. die optimale Lösung.
Weitere Vorteile sind:
§ Komplettschutz des Druckes durch Rückseitendruck
§ feuchtigkeitsbeständig
§ Splitterschutz bei Glasbehältern
§ Öffnungsnachweis-Funktion (Originalitätsverschluss)
§ Lichtschutz für Containerinhalte
§ Banderolen können nach Gebrauch leicht von Behältern entfernt
werden (Recycling)
| | |
|
|
|
|
CCI Valve Technology AB
|
|
 |
valves
control valves and hydraulic and pneumatic actuators | | |
|
|
|
|
CB Chemie und Biotechnologie GmbH
|
|
 |
cleansing agents
The bio-chem cleansing agents are ecologically friendly beneficial alternatives to conventional products and substitutes for CFCs and other solvents. The bio-chem cleansing agents meet the latest technological requirements, improve working conditions for the user and get good marks in critical environmental examinations. | | |
 |
Lubricating with bio-chem
Lubricating with bio-chem means the application of well-chosen special lubricants with high capabilities. Extended service life and less maintenance are the advantages of the bio-chem special lubricants. | | |
 |
Maintaining
We supply special solutions for your maintenance needs. Be it rust rinser that takes effect in a matter of seconds, or be it economical oil binder, all our products are easy to use and environmentally friendly. | | |
 |
Welding with bio-chem
Welding with bio-chem means an ecological and user-friendly welding technology that guarantees an optimal welding result. The bio-chem welding accessory program consists of quality products that meet the latest technological and market requirements with respect to effectiveness, environment, and economy. Each product is friendly to the environment and economical to use. | | |
|
|
|
|
Cat Lift Trucks
|
|
 |
4-wheel electric forklift truck
Electric Powered Lift Trucks 1.0 - 5.5 tonnes | | |
 |
Diesel engine lift truck
Diesel Powered Lift Trucks 1.5 - 16.0 tonnes | | |
 |
Electric forklift truck
EC15-30N | | |
 |
Electric Powered Lift Trucks
Electric Powered Lift Trucks 1.0 - 5.5 tonnes | | |
 |
LPG lift truck
LP Gas Powered Lift Trucks 1.5 - 7.0 tonnes | | |
|
|
|
|
Case Packing Systems BV
|
|
 |
food packaging technology
automation of frozen food packaging technology | | |
|
|
|
|
Casati Macchine s.r.l.
|
|
 |
TWO KNIVES VENEER PACK GUILLOTINE SHEAR
The machine allows, with a single
operation, to cut the veneer pack
on both sides to be trimmed.
Sturdy steel made structure.
Ball-ways. The upper and lower
knife beams slide
on lateral and central guides
Ballscrews driving the moving
part
Torsion bar on the pressor
Cutting edge light
PLC automation
Electronic microprocessor
programmer
Special low wear material
working tables
Safety photocells
Hydraulic safety clamping
device on the front knife-beam
and on the pressor | | |
 |
VENEER PACK GUILLOTINE SHEARS
These machines are specially
designed to offer, thanks to
the original constructive solutions,
advantageous features to those
companies having a small
veneer department.
The structure is welded steel made,
with special table section design
ensuring high rigidity.
The knife-beam movement
takes place between three
couples of self-lubricated
slide-ways.
The pressure beam is fitted
with torsion bar. | | |
|
|
|
|
Cascade Corporation
|
|
 |
Turnaload forklift truck
Turnaload forklift truck | | |
|
|
|
|
Carrier Vibrating Equipment, Inc
|
|
 |
Fluid-Bed-Dryer
Fluid-Bed-Dryer | | |
|
|
|
|
CARMANAH Design and Manufacturing Inc.
|
|
 |
discChip
discChip | | |
 |
drumChip
drumChip | | |
 |
veneerChip
veneerChip | | |
|
|
|
|
C-METALS NV
|
|
 |
Press Brake hydraulic
Press Brake hydraulic | | |
 |
Press brakes
Press brakes | | |
|
|
|
