|
|
 |
# Hârtie, carton gros şi subţire
# Materiale mixte
# Mijloace de împachetare
# Mijloace complementare şi auxiliare de împachetare |
| angajaţi : |
200+ |
| Anul înfiinţări : |
1869 |
Tip afacere : |
Manufacturer |
Numele Færch a fost legată de Holstebro de aproape 130 de ani, si astazi este locul de sediul societatii. În 1869, o companie de tutun numit "R. Færch de trabuc-og Tobaksfabrikker A / S "a fost fondată în oraş. Firma sa extins rapid in urmatorii 100 de ani şi în 1961 a fuzionat cu CW Obel A / S şi Chr. Augustinus Fabrikker A / S, doua mari si cunoscute companii daneze de tutun, ceea ce duce la formarea de astăzi "Skandinvisk Tobakskompagni A / S". În 1969, familia Færch si alte doua companii de tutun a demisionat de la managementul de zi cu zi a preşedintelui Skandinavisk Tobakskompagni A / S, şi Jørgen Færch, apoi R. Færch Plast A / S, a fondat fabrica de mase plastice în Holstebro. Producţie extins rapid, după o nouă fabrică a fost construit în 1973. Færch Plast a devenit rapid unul dintre principalii producători în Danemarca, şi a început exportul în Anglia, unde, în acelaşi an, compania cuplat cu George Harrison Ltd., o agenţie de afaceri în limba engleză. Aceasta a dus la înfiinţarea unei filiale, Harrison Europac Ltd., în 1991. Compania apoi a avut la dispozitie este o zonă de producţie de aproximativ 7.000 m2. În 1987 Heinrich Kusch a devenit Managing Director şi sa pensionat în aprilie 2001. La data de 1. Aprilie 2001 Jens Bornstein a devenit noul nostru Managing Director. Scurt timp, societatea este necesar să se extindă, şi un nou 750 m2, cu aripi administrativ, proiectat de cunoscutul arhitect danez Henning Larsen, a fost adaugat in doi ani mai târziu. Acest repede s-au dovedit insuficiente, iar după doi ani într-un antrepozit 7.500 m2 avansate de produse finite a fost construit. Scopul Færch Plast de a fi unul dintre producătorii de top din Europa a fost realizat în 1991. Achiziţionarea unui extruder nou film, care ar putea produce film cu până la 9 straturi, îmbunătăţit considerabil capacităţile de barieră din materiale plastice Færch. Acest împins Færch Plast în prim-plan a industriei europene de materiale plastice. Compania a primit diverse premii de peste ani. În 1991, de exemplu, Harrison Europac Ltd., filiala sa în engleză, a primit "Medalia de ASR Printul Henrik lui de onoare" şi daneză Execuţia Diploma. concentrarea companiei puternic cu privire la igiena în ultimii zece ani sau aşa se reflectă în opinia sa, faptul că respectivele containere alimentare ar trebui să fie produse la aceleaşi standarde înalte de igienă ca hrană. În 1998, Færch Plast a devenit prima companie daneză pentru a obţine certificarea igiena de la ADAS, o dezvoltare britanică şi institut de consultanţă. Această certificare a fost înlocuit cu un BRC / certificare a PIO (vezi mai jos). Participarea la un proiect privind eficienţa energetică şi reducerea substanţială a consumului de energie a dus la societatea beneficiară 1999 "Energie şi Mediu Award" pentru eforturile sale în acest domeniu. În martie 2002 Færch Plast a fost acreditat cu BRC / standard PIO ca primul producător danez de ambalaje pentru contactul direct cu produsele alimentare. Noile cerinţe standard de standarde mai ridicate de control al igienei, siguranţa produselor de calitate ANS pentru producătorii de ambalare a produselor alimentare. În anul 2003 a fost acreditat pentru mediul său de lucru. Compania a fost printre primele 10 companii daneze urmează să fie atribuite OHSAS 18001 si statutar Ordinul nr 923 din cadrul Ministerului Muncii. Færch Plast se dezvoltă rapid, şi spaţiu noua fabrica a fost construita. Acest lucru aduce suprafaţa totală a dezvoltat la aproximativ 46.000 m2. În 2005 Færch Plast a fost acordat şi premii Scanstar Worldstar pentru TWIN / IT capac dublu. Capacul dublu este o soluţie unică pentru combi-cutii alcătuită din mai multe tipuri diferite alimente. La data de 3 martie 2008 Faerch Plast a inaugurat o fabrică complet nouă de producţie în Liberec, Republica Cehă. Investitia intr-o fabrica de 13,500 de metri patrati la sumele DKK 200m.
| Disposables Færch Plast has a large range of disposable packaging, typically made from PS and PP. These products are not made at Færch Plast, and other production, sales and hygiene conditions apply |
| Packaging for Cold Food and Snacks This product group is used widely in the food industry and retail trade, e.g. for sandwiches, burgers, snacks, salads, bakery, confectionery, and convenience products.
The most typical materials used here are PS, PP, APET and OPS. The latter is not made at Færch Plast, and other production and hygiene conditions apply.
Packaging for Cold Food and Snacks in PS
PS- has a good impact strength and a high resistance to fat. PS can also be used for frozen products.
Packaging for Cold Food and Snacks in PP
PP- is produced in two varieties. Ho-PP is transparent and more rigid than Co-PP, which unlike Ho-PP is contact-clear, and has a softer and more flexible structure. The two types of material are used at different temperatures. Co-PP can be used below freezing point whereas Ho-PP is suitable for use to a minimum temperature of +20 C. Both materials are suitable for heating food in microwave ovens.
Packaging for Cold Food and Snacks in APET
APET is a glass clarity material, but is also avaible in a range of colurs. It is especially suitable for food products where maximum exposure of the product is desired. APET is a tough material with a good impact strength.
Færch Plast has a large range of disposable packaging, typically made from PS and PP. These products are not made at Færch Plast, and other production, sales and hygiene conditions apply.
|
| Packaging for fresh meat Fresh meat products, fish and poultry are packed using Færch trays.
Packaging for fresh meat in PS
Products in Færch trays provide a good presentation in refrigerated supermarket shelves, and come in a variety of colours and shapes. Products in Færch trays can be frozen quickly, and the trays are also available with a Supporter® base pattern, which gives a better oxidation of the underside of the meat. The trays can also be supplied with fitted absorbers. The trays are made from Polystyrene - PS.
We have a wide range of special packaging for specific needs. These products are for use in the food industry, retail trade and the pharmaceutical industry, where, due to our high hygienic standards, Færch Plast is an approved supplier. The products are made from CPET, APET, PP, PS and OPS, and range from cheese/sausage containers to a variety of "click-on" lids. OPS is not made at Færch Plast, and other production, sales and hygiene conditions apply.
Packaging for fresh meat in APET
APET is a glass clarity material, but can also be supplied in a range of colours. It is eminently suitable for food products where maximum exposure of the product is desired. APET is a tough material with good impact strength.
Packaging fresh meat in PP
PP is produced in two varieties. Ho-PP is transparent and more rigid than Co-PP, which unlike Ho-PP is contact-clear, and has a softer and more flexible structure. The two types of material are used at different temperatures. Co-PP can be used below freezing point whereas Ho-PP is suitable for use to a minimum of +20 C. Both materials are suitable for heating food in microwave ovens.
APET and PP have relatively good barrier properties, and can therefore be top-sealed for MAP prepacking.
Our little mascot Mr. T. Ray can guide you through the factors you should be aware of when selecting trays for packing meat. Contact Faerch Plast to get a copy of the guide.
|
| Packaging for Ready Meals Færch Plast is one of the leading manufacturers of packaging for ready meals and convenience products. In Europe, changing consumer behaviour and lifestyles means that the market for these products is expanding rapidly.
There is a wide variety of packaging for ready meals, both as regards heating and preparation. These are usually made from CPET or PP. For information on packaging for ready meals not requiring heating, please see packaging with and without lids.
We have a wide range of special packaging for specific needs. These products are for use in the food industry, retail trade and the pharmaceutical industry, where, due to our high hygienic standards, Færch Plast is an approved supplier. The products are made from CPET, APET, PP, PS and OPS, and range from cheese/sausage containers to a variety of "click-on" lids. OPS is not made at Færch Plast, and other production, sales and hygiene conditions apply.
Packaging for Ready Meals in CPET
Due to its high-temperature stability, CPET is well-suited as packaging for ready meals, and can be taken directly from the freezer and heated in either a conventional oven or microwave oven. In addition, our CPET containers have a top layer of co-extruded APET, which gives this type of packaging extremely good sealing properties and a superb glossy appearance.
Packaging for Ready Meals in PP
PP is produced in two varieties. Ho-PP is transparent and more rigid than Co-PP, which unlike Ho-PP is contact-clear, and has a softer and more impact resistant structure. The two types of material are used in different temperature ranges. Co-PP can be used below freezing point whereas Ho-PP is suitable for use to a minimum temperature of + 2°C. Both materials are suitable for heating food in microwave ovens.
| |
|
|