KOCH blister packaging line KBS-PL

The Koch blister packaging line KBS-PL is the high capacity blister line for high quantities of equal or similar products. The blister film is guided through the forming station. The film with the finished blisters is cut after forming in longitudinal and transversal direction. The finished blisters are inserted into the pallets by grippers or suckers. On the inserting section the products are loaded manually or automatically into the blisters. Then the cover card is fed by the integrated card loader. Afterwards the cover film is sealed onto the blister in the sealing station. Advantages of this machine technology Highest packaging capacity Simple and robust machine construction Technics proven in several-shift operation Very high availability Most modern control technology by IPC with comfortable operator direction by touch screen Modem connection for remote fault diagnosis

KOCH Carton formers

The KOCH carton formers are employed for production of a huge number of varying boxes by application of a stamped carton blank made of solid fibre board or corrugated cardboard. The carton blank is picked out of a magazine by vacuum suckers. Afterwards the carton blank is placed into guide rails. Horizontal, oblique or pallet magazines are available depending on demand. Individual tracks or dots of hot glue are applied on the glued joints during feed via forming tool. After reaching the stopper the carton blank is pressed through the forming tool by a forming tappet, moulded in and glued together. The finished boxes are transported out of the machine via outfeed conveyor belt rising laterally or frontally out of the machine. The glue tracks are controlled via machine control. The adjustments for different formats can be entered directly on the user interface. Furthermore it is possible to employ crimp tools to form the carton blanks without using hot glue. Advantages of this machine technology Different sizes and performance ranges allow the optimal selection of a carton former depending on particular demand. Change of forming tools is not required, because the tools are equipped with adjustable spindles. Only the forming tappet must be changed. Quick format change Drives via servomotor, resulting in easy adjusting on the control monitor and format optimized motions. State-of-the-art control technology via industrial PC with convenient operator guidance via touch screen. Optionally Siemens S7. Telephone connection for remote diagnosis

KOCH Group packer SP

The KOCH group packer SP was developed to process carton sleeves (type series Fefco 020..) The sleeves are supplied via horizontal magazine and given directly to the sequential control by the carton picking device The products are taken over customized, placed and pre-arranged in groups. The products are pushed in laterally, optionally on the left or right side. Suitable inserting aids ensure a safe and product-friendly inserting of products. The carton can be closed both with hot glue or with adhesive tape. The finished cartons leave the group packer via outfeed conveyor belt. Advantages of this machine technology High operating convenience by optimal accessibility Quick format change without tool change High flexibility by arrangement of individual functional assemblies State-of-the-art control technology by industrial PC with convenient operator guidance via touch screen Modem connection for remote diagnosis

KOCH sliding table machine KST

KOCH sliding table machine KST The sliding table machine is designed for quick and economic packaging of frequently changing products with small numbers of pieces. Advantages of this machine technology Low capital costs Short set-up times through rapid tool changes lnexpensive tooling Requiring little space Low energy costs

KOCH turntable machine KDT

Provided with four stations for quick and economic forming or sealing, or for combined forming and sealing, for the production of extremely inexpensive mono-material self-service packages of cardboard (Nurpack), or of environmental-friendly blister packs. Advantages of this machine technology Low capital costs Quick tool change and low tool costs Low space requirement and low energy costs Machine transportable with swivelling lock-type casters PLC optionally with modem Connection for remote error diagnosis Control panel with clear-text display Operating modes: set-up, single-cycle, automatic Production parameters, such as forming period, sealing period etc. are stored in the programme Several programmes can be stored