Chamfer Gauge

Measuring surface and hardened steel taper Scale graduation of indicators: 0.01 mm Calibration at factory or via setting master Special designs on request Internal taper gauge (IKT) Direct gauging of major diameter of internal tapers or tapered slots Models with 60°, 90° and 127° taper Application range: Ø 0.5 mm to 120 mm Measuring range: 11.5 mm for 60° taper/19.5 mm for 90° and 127° taper The low-cost Alternative: The Internal Taper Gauge IKT-OS The term OS is an abbreviation which means “without stop bar”. By the omission of the bar, the alternative internal taper gauge can be manufactured at a lower cost which in turn renders a favourable sales price. The IKT-OS is implemented to measure the largest diameter of internal tapers or tapered grooves. In contrast to its brother product, the IKT-OS requires a contact surface and cannot be used with thin-walled work pieces. Available in the following models: IKT90-1-OS Measuring range 0,5-20 IKT90-2-OS Measuring range 20-40 IKT60-1-OS Measuring range 0,5-12 IKT60-2-OS Measuring range 10-21 IKT127-1-OS Measuring range 0,5-20 Standard setting masters can be utilised, as well as the corresponding dial indicator or digital dial indicator IKT-MU1086W. Available on request.

Dial Indicators

MU-1 m/MU-01Z Scale graduation: 0.001mm or 0.0001“ Travel: 1 mm/0.04“ Accuracy according to DIATEST standard Various measuring pressures MU-10 m/MU-1Z Scale graduation: 0.01 mm or 0.001“ Travel: 10 mm/0.5“ Accuracy according to DIN 878 or DIATEST standard Various measuring pressures Micro comparator (F-1000) Scale graduation: 0.001 mm Measuring range: ± 0.05 mm Accuracy according to DIN 879 Various measuring pressures MDU-125 Measuring range: 12.5 mm or 0,5“ Resolution: 0.01 mm/0.001 mm (0.0005“/0.00005“) LCD digital display Can be switched from mm to inch Data output: opto-RS232 Model MDU-A with traffic light display and min/max function Model MDU-M with min/max function (only for split-ball and plunger probes)

Gear Gauges

Internal gear gauges (IV) For gauging of measurement between balls (Mi) Constructed in the same way as the split-ball and plunger probe system Application range: Mi = 3.5 mm up to 333 mm/ 0.14" to 13" Measuring range: 0.6 mm to 1.6 mm for split-ball system (Mi = 3.5 mm to 26.1 mm/0.14" to 1.03") 3 mm for plunger probe system (Mi = 26.1 mm to 333 mm/ 1.03" to 13") Split-ball and plunger probe accessories can be applied Tungsten carbide measuring balls Special designs and gauge slides on request External gear gauges (AV) For gauging of measurement across balls (Ma) Application range: Ma = 10 mm to 140 mm/0.4" to 5.5" Measuring range: 30 mm/1.2" Tungsten carbide measuring balls For use in MST-102 measuring stand

Plug Gauge

Self-centring high-precision indicating plug gauge allowing static and dynamic measuring Application in manufacturing of high-precision bores from Ø 2.98 mm to 270 mm/0.117" to 10.62" Measuring range: 0.1 mm to 0.8 mm depending on diameter and type Calibration in setting ring Various contact points (material and design) depending on work-piece type Many designs in standard programme Special design on request Extensive range of accessories Setting rings according to DIN2250-C in standard programme (range Ø 1 mm to 300 mm/0.04" to 11.8") Holders and depth extensions are manufactured from temperature stabilised material, ensuring minimal gauging errors.

Plunger Probe

Modular design, universal bore gauge system for larger bores (M5678 and M68-FB) Large measuring range (± 1.5 mm) Application range: Ø 26.3 mm to 330 mm/1.03" to 13" (Ø 38.5 mm to 348 mm/ 1.5" to 13.7" for blind bore FB) Calibration in setting master or micrometer Adaptability to most bore gauging applications Blind bore type (FB) in standard programme Tungsten carbide contact points Holders and depth extensions are manufactured from temperature stabilised material, ensuring minimal gauging errors

Split-Ball Probe

Universal bore gauge for indicating bore gauging Modular design system with extensive range of accessories, enables gauging of most bores. Application range: Ø 0.47 mm to 41.3 mm/0.02" to 1.6" (in 3-point version up to 150 mm/5.9") Calibration in setting master Styles for blind bores (FB) and parallel distances (PA) included in standard programme Special designs on request Setting rings according to DIATEST company standard or to DIN 2250-C in standard programme