|
|
|
* Инсталации за пропарване
* Инсталации за импрегниране |
година на основаване : |
1977 |
бранш : |
Manufacturer |
Фирмата е основана през 1977 година. Към края на 2003 г. компанията е придобита от всеки четирима колеги и сега се извършва в името на WTT - обработка на дървесина технологии. WTT разработване и производство на инсталации за промишлени за защита на дървесината и дърво сушене. Примери за растения, които са част от нашия бизнес са SSV вакуум сушилни, сушилни енергия вакуум за строителството от дървен материал, растения термо обработка, импрегниране растения, креозот растения импрегниране, фиксиране растения, двойно растения вакуум импрегниране и горещо масло пречиствателните станции. До тази дата 800 инсталации в 36 страни са доставени и се обслужва в рамките на промишлената индустрия за защита на дървесината. Разработването и производството в рамките на тази високо специализирана ресор поставени в особена тежест на един обучен и квалифициран труд сила експлоатацията на най-добрите машини. От 1985 г. на вакуум SSV сешоар е бил предаден на 250 клиенти по целия свят за сушене на първа класа твърда и мека дървесина. Нов сешоар енергия вакуум е на разположение от 2003 г. насам. Днес тези широко признати вакуум сушене растения се използват в почти всяка област на дърво сушене индустрия. Непрекъснато развитие е осигурено в сътрудничество с водещи институти, например BFA в Хамбург, на Holzfachschule Биел в Швейцария и Forintec в Канада. Примери за последното развитие на WTT са термо пречиствателни станции, както и инсталации за третиране с горещо масло (ленено масло). Тези продукти ще значително по-нататъшно развитие на производството на дървен материал защита, както и оцветяване на дървесина.
| WTT - ENERGY VACUUM DRYER WTT - ENERGY VACUUM DRYER
• Turnkey drying plant tested in our
factory for placement in the open
air.
• Approved quality with work test
certificate, construction in CE
standard.
• Up to 24 months' guarantee.
• Fully integrated and insulated pump
and technique room
• Energy system with integrated
additional heating system without
the need for connection of water
and heating
• Heat treatment for export
packaging timber with data
documentation.
• Automatic PLC control with optional
graphics software under WIN
98/2000/XP
• Ready-made transport and
operation system, complete with
rails.
In short – we offer you an all-in-one-hand solution:
Manufacturing – Transportation – Installation – Start-up – Guarantee – Service
|
| WTT - SSV VACUUM DRYER WTT - SSV VACUUM DRYER
• Quality in its essence
• Effective volume from
5 to 260 m3
Since 1985 the SSV vacuum dryer has been successfully in operation in all fields of the wood industry. The process advantages are numerous:
• Quick-drying of drying-resistible
wood types , e.g. 65mm oak from
40-10% in 288 hours.
• Bigger dimensions , e.g. 120mm
spruce/construction timber from
80-15% in 96 hours.
• Strain-free drying , e.g. beech
parquet 33mm from 80-6% in 144
hours.
• Value for money: 3 – 8 times
faster than conventional dryers.
• Natural colours of wood
maintained , e.g . beech, maple,
ash and birch .
• Uniform colouring, e. g. of oak
• No cracks or mould, due to 100%
oxygen-free drying.
TURNKEY DELIVERY OF VACUUM DRYER
WTT - SSV VACUUM DRYER
• Turnkey drying plant tested in our
factory for placement in the open
air.
• Approved quality with work test
certificate, construction in CE
standard.
• Up to 24 months' guarantee.
• Fully integrated and insulated
pump and technique room - as
option with heating unit, oil tanks
and chimney.
• Heat treatment for export
packaging timber with data
documentation.
• Automatic PLC control with
optional graphics software under
WIN 98/2000/XP
• Ready-made transport and
operation system - complete with
rails.
In short – we offer you an all-in-one-hand solution:
Manufacturing – Transportation – Installation – Start-up – Guarantee – Service
VAKUUM DRYERS IN ALL SIZES
• Stainless steel autoclaves with
diameters of 2200, 2600, 3000,
3500, 4000 and 4250mm
• Stainless steel autoclaves in
standard lengths of 6000, 9000,
12000, 15000, 18000, 21000,
24000, 27000 and 30000mm.
Special lengths available upon
request.
REQUIREMENTS AT YOUR BUILDING SITE
• Foundation under the autoclave
• Crane for unloading
• Connections to electricity, water,
wastewater, and heating.
|
| WTT - VACUUM DRYER WITH "SMOKING" EQUIPMENT Noble and dark wood colours by new WTT procedure
Veneers, boards and even strong and massive wood planks are thoroughly coloured by a completely new procedure for treatment of tannin-bearing timber.
Wood species especially suited for this treatment are oak and acacia.
The technical equipment needed for this process is supplied as additional device for the WTT vacuum drying plant, whereby "smoking" with ammonia is accomplished in an additional step to the drying process. The obvious advantage of this concept is that the plant is capable of operating with this special treatment while being fully functional as one of our traditional vacuum dryers as well.
Even thick oak planks (65mm) are through-coloured perfectly within approximately two weeks. This should be seen in contrast to existing smoking systems that with the double time consumption are capable only of colour penetrating a few millimetres into the timber.
A further substantial advantage of the WTT "smoke"-drying procedure can be found in a completely new subsequent treatment procedure whereby a smell-free wood product is available immediately at the end of the treatment. Until now it has been necessary to store the smoke-treated timber several weeks in buildings equipped with costly air purification systems.
Implementation of the newest technology ensures that all requirements regarding impact to the surrounding air and water are met immediately, as is the case with requirements to operational and industrial safety. Thus only short time is needed to obtain the operation permit of this plant type.
The first two vacuum drying plants equipped with the smoking feature were taken into use recently by a German oak wood and veneers specialist.
| |
|
|