30-30 Air Filter

For warranteed longer-lasting filters, the smart money is on Camfil Farr 30/30® filters. Our exclusive media is bonded to a welded wire grid and then shaped into a radial pleat, allowing full use of the media. This configuration allows the 30/30 filter to hold more dirt and last longer. The 30/30 frame is made of water-resistant beverage board instead of recycled cardboard, so the 30/30 can withstand the worst conditions presented by an HVAC system. No filter distortion or blowouts. Features and benefits: Radial Pleat Design with 11-16 pleats per linear foot allows full use of the media area for higher dirt-holding capacity. Welded Wire Grid eliminates distortion of the media pack under high air flow conditions. Exclusive Media of a specific blend of cotton and polyester provides consistent dirt removing efficiency for the life of the filter. Radial Pleat combined with Exclusive Media maintains uniform low resistance to air flow over the life of the filter and saves energy. 28-point Beverage Board Frame for high filter rigidity in any application. The Camfil Farr 30/30 has been setting the standards by which other medium-efficiency ASHRAE filters have been judged since 1963. With more than 26 design improvements, it continues to provide the best return on your air filtration investment. The 30/30 is available in the "sa" version with a header, and is also available as UL 900 Class 1.

Air pollution control.

Air pollution control.

Airopac

The Camfil Farr Airopac® is unaffected by varying air flows or repeated start-ups and shut-downs. The media is resistant to extended periods of high humidity, making the Airopac an excellent choice for humid climates or moisture-laden conditions. The Camfil Farr Airopac Incorporates microfine glass fibres shaped into a wet-laid continuous media sheet. Although no air filter should be continuously operated in saturated conditions, glass mat media offers a higher degree of performance in saturated conditions than high-lofted media products. Includes safe-edge aluminium media separators to assure a rigid and durable filter pack. The separators also ensure uniform air flow throughout the media pack for full media utilization (longer filter life). Includes a media pack sealed into the enclosing frame eliminating air bypass. The media is bonded to the enclosing frame on the sides, and sealed with high-efficiency media on the top and bottom. A rubber based adhesive seal assures a durable and stable filter pack. Includes an enclosing frame manufactured from a unique blend of galvanized steel with a pre-processed aluminized finish. This combination provides a 50% increase in corrosion resistance when compared to standard galvanized metals. Is available with a single header or a double header depending on installation requirements. Each header includes a gasket strip to ensure a leak-free seal between the filters, or between the filters and the filter housing. Available in a variety of sizes, the Aeropac offers high efficiency particulate filtration unaffected by varying air flows or adverse moisture conditions. The Airopac is available in three efficiencies. Typical applications include medical facilities, commercial facilities and food processing plants.

Hi-Flo

The Camfil Farr Hi-Flo® offers high-efficiency ASHRAE grade filtration to address today's indoor air quality problems. The Hi-Flo can remove contaminants such as fumes, smoke, bacteria, fungi and virus-bearing droplet nuclei. The Hi-Flo is the filter of choice for the removal of nuisance contaminants such as pollens, paper dust and other atmospheric impurities. The Camfil Farr Hi-Flo incorporates high lofted air laid microfibre glass media to ensure reliable efficiency throughout the life of the filter. Equipped with a high quality filter material, with small fibre diameter and uniform lofting, it guarantees consistent and reliable sub-micron particle capture throughout its life. Synthetic micro mesh media backing ensures medium protection and support in turbulent or varying air flows. Particle capture performance and filter configuration are unaffected by dust loading and/or humidity Controlled media spacing minimizes pocket-to-pocket contact, ensures uniform airflow and full utilization of the media area Optimized design of the pocket stitching Hi-Flo is made with a rigid steel frame These features result in minimum life cycle product cost for your facility. Your selection of the length and number of pockets should be based on the required air flow through the system. For fully incinerable bag filters, we recommend Hi-Flo Green. Hi-Flo Green has a very reliable plastic frame which enables complete incineration of used filters. Apart from the frame, it is made of the same superior materials, design and performance as Hi-Flo. Hi-Flo filters are also available with plastic frames "Hi-Flo Green".

Opakfil Green

The Camfil Farr Opakfil Green® provides high efficiency filtration in a light weight and compact format. OpakfilFor use in any air conditioning application and preparatory filtration in cleanrooms. It can remove all contaminants such as fumes, smoke, bacteria, fungi and virus-bearing droplet nuclei which makes it a very good choice for improving your indoor air quality. The Camfil Farr Opakfil Green: Contains a very small fiber diameter material in a rigid and safe frame design. This guarantess a very high and consistent filter efficiency for sub micron particles. Reliable performance makes it the ideal final stage filter to meet the European standard for ventilation of non-residential buildings, EN13779. Is equipped with a handle for easy handling and installation. Frame has drainage for condensation water. Filter can be installed in both senses and furnished with a gasket. Filter is fully incinerable. By optimizing the material configuration, we can furnish an extremely large filter area (19 m2) and still utilize the entire material within. This large filter area allows for the high filter efficiency. It also enables a very low pressure loss over the filter, both initial and when dust loaded, even at high air flows. This makes it the best available compact filter when an optimized filter economy is required.

Sofilair - Sofilair Green

The Camfil Farr Sofilair H13 H14 is a high capacity HEPA filter. The glass fibre paper media is ideal for final filtration applications in air conditioning systems. The Sofilair advantages are: High air flow rates, up to 4000 m3 per hour. Optimal filtration sequence in clean rooms. Individual test certificate according to EN 1822. New ergonomic handle. Camfil Hint! To ensure the expected operating life is achieved, very high efficiency filters must be protected by effective OPACIMETRIC prefiltration (F/7F/8) using Hi-Flo, S-Flo W, or Opakfil.