|
|
|
 |
Вертикальні та горизонтальні конструкції, що використовуються в сучасному виробництві гуми. |
| yearestablished : |
1985 |
biznestype : |
Manufacturer |
Вертикальні та горизонтальні конструкції, що використовуються в сучасному виробництві гуми.
| Our new models - all thoroughly revised and with detailed improvements - can be delivered in vertical and horizontal construction, which are used in the modern rubber manufacturing.
These machines are produced for injection capacity of 150 cm³ to 6000 cm³ > more... and according to requirements clamping force sizes of 450 to 6000 kN > more.... Therefore our machines meet all future-oriented demands for the manufacturing of quality mould parts from elastomeres.
Because of intensive research and consistent development we can grant a very good price performance ratio as well as modern technology and high quality.
Continuous innovation and the flawless mastery of their technology combined with the thorough knowledge of the profession of rubber manufacturers and their demands as well as perfect knowledge of the market makes it possible for RIMM to always be a step ahead.
Concerning the economic efficiency and quality of the produced goods, these machines pave the way for the rubber manufacturing trade.
|
RIMM Additional equipment
To be able to suit the production surroundings at the best RIMM machines can be designed with various additional equipments.
• ejector equipment on the fixed and moving platen
• automatic rubber strip intake
• Stock feeder for silicone
• Vacuum pump
|
 | c-frame Summar C-frame 150/45C
Clamping unit
Screw diameter mm 25
Max. plasticising capacity cm³/min 400
Max. screw speed U/min 0-180
Max. shot volume cm³ 150
Rubber strip intake length x width mm 42x15
Clamping unit
clamping force kN 445
Max. mould opening stroke mm 300
Min. mould height mm 100
daylight of heating platens mm 400
Min. mould height of heating platens mm 300x300
Working height mm 1000
Heating power W/cm³ 0,45
Rated heating power kW 2x2,5
General data
Operating pressure bar 280
Motor capacity kW 7,5
Connected load kW 17
Reservoir capacity l 130
Total weight kg 1600
Floor space area length x width mm 1400x1200
Max. height mm 2500
|  | Horizontal Screw diameter mm 25 28 32 40 50
Max. plasticising capacity cm³/min 400 600 800 1000 1500
Max. screw speed U/min 0-180 0-200 0-190 0-180 0-180
Max. shot volume cm³ 150 500 850 1500 2500
Rubber strip intake length x width mm 42x15 45x16 50x16 54x18 85x20
Clamping unit
clamping force kN 450 900 1600 2600 4000
Max. mould opening stroke mm 300 400 500 550 750
Min. mould height mm 75 100 100 200 250
Max. daylight of heating platens mm 375 500 600 750 1000
Heating platens standard mm 300x300 350x450 450x520 550x650 660x800
Working height mm 1000 1110 1125 1230 1590
Heating power W/cm³ 0,45 0,46 0,47 0,43 0,42
Rated heating power kW 2x2,5 2x4 2x6 2x8,4 2x12,8
General data
Operating pressure bar 280 280 280 280 280
Motor capacity kW 7,5 11 22 22 45
Connected load kW 21 28 43 50 77
Reservoir capacity l 120 120 190 200 250
Total weight kg 1300 3400 5200 7700 10000
Floor space area length x width mm 2800x800 3200x850 3800x1200 4800x1400 5000x1550
Max. height mm 2500 2660 3020 3455 3750
|  | Vertical rubber injection moulding machines Vertical rubber injection moulding machines | |
|
RIMM brochure German-English
Click on our Logo to view this Catalog
|
|
|
<
