|
|
|
IWE Spulen und Handling GmbH
|
|
 |
Handling – Standard- and Specialconstructions
Placing the take-apart process reel on the reel tilter with a jib crand and the exact adjusted lifting device
| | |
 |
Lifting tackles
Handling system for lifting and transporting of steel and plastic reels. | | |
 |
Reels according to DIN
Typ EG
High speed wire drawing and annealing reel for use in high speed machines | | |
 |
Tilting device – Thorn gripping Type WGK/WGZ
For safe lifting and tilting of steel reels
Sturdy construction in various types | | |
 |
Typ EGS
Heavy duty reel for drawing of thin steel-, copper-, Al-alloy wires | | |
 |
Typ NE
Stranding reels for use in stranding machines | | |
|
|
|
|
INSYS MICROELECTRONICS GmbH
|
|
 |
Cabled solutions
Products for cable communication, e.g. via modem, ISDN or ethernet | | |
 |
Embedded systems
Embedded systems | | |
 |
High-security locks
Overview of all INSYS High-security locks | | |
 |
Modem-Router-Switch
MoRoS:
Remote Access to Industrial Ethernet Networks
| | |
 |
Modems for 19" Rack
The INSYS 19" rack is designed for application areas in which many data transmission units are to be accomodated at the same place. Due to its modular design, analogue modems for dial-up lines and dedicated lines as well as digital ISDN adapters may be integrated as slot cards according to performance requirements. | | |
 |
Wireless Products
Wireless communication products, e.g. GSM, GPRS and WLAN | | |
|
|
|
|
Institut für Mikrotechnik Mainz
|
|
 |
CNC and EDM Machining
CNC and EDM Machining
Robotics ,Automation ,control and assembly | | |
 |
Current development projects in the chemical process engineering field
Current development projects in the chemical process engineering field | | |
 |
Current development projects in the cross-sectional technologies field
Current development projects in the cross-sectional technologies field | | |
 |
Current development projects in the microfluidics field
Current development projects in the microfluidics field | | |
|
|
|
|
INOTEC GmbH
|
|
 |
Automatic processing
Automatic processing | | |
 |
Inline emulsifiers
Inline emulsifiers | | |
 |
Screw feed emulsifiers
Screw feed emulsifiers | | |
 |
Vacuum emulsifiers
Vacuum emulsifiers | | |
|
|
|
|
Inoex GmbH
|
|
 |
cable extrusion.
Whether the purpose is to obtain an increase in efficiency through the modernisation of older lines, or one's own recipes are created to distinguish oneself from competitors - retrofitting with the SAVEOMAT will in any case be a decisive step for companies of this sector to automate existing lines.
This system serves for the optimisation of insulation layer thickness, the minimisation of safety tolerances within given standards, and therefore to save material. saveomat permits a quick commissioning, helps to avoid start-up scrap and guarantees the transparent and safe direct extrusion of liquid reactive materials such as silane and peroxide.
| | |
 |
film extrusion
What counts among competitor's strategies in the film sector, is the development of complex multi-layer film with special material composites or raw material compositions. Highly developed processes require proven measuring and control technologies and precise dosing and material mixing.
Today, our multi-component dosing stations permit the dosing of up to twelve components on one extruder. In a co-extrusion process up to ten layers and 30 components can be monitored. In addition, wall thickness and width measuring systems as well as cooling rings can be integrated.
| | |
 |
pipe and tube extrusion
pipe and tube extrusion | | |
 |
pipe and tube extrusion.
This field is faced with an ever stronger competition. Prospects arise from product niches and special material recipes which are usually manufactured in smaller lots. This additionally requires an efficient and flexible process and underlines the need to make full use of any potential for optimisation.
The iNOEX SAVEOMAT and AUREX stand for a constant weight per metre, optimised wall thickness, flaw detection and higher performance through precision measuring and control techniques.
Furthermore, the ADVANTAGE-components applied for the automatic change of product dimensions reduce set-up times, product change times, start-up scrap and storage capacities and they guarantee a higher flexibility.
| | |
 |
profile extrusion
Concepts that have a future.
For the profile extrusion.
Many factors add up to ever growing requirements in the profile extrusion industry: higher outputs, recipe changes, complex profile systems, colour changes, co-extrusion of special layers and the use of recycled material.
For such needs the iNOEX PROMEX is the standard in profile measurement, quality data recording and documentation. Surfaces are scanned online, profiles that show flaws are sorted out, cameras deliver images of profile dimensions.
Through the combination with our gravimetric systems, dimensional accuracy and the weight per metre are monitored and all components can be precisely dosed.
| | |
 |
profile extrusion.
profile extrusion. | | |
|
|
|
|
inocermic GmbH
|
|
 |
Advanced ceramics for industry and research
Advanced ceramics are recommended for all applications where:
high hardness and abrasive resistance,
high toughness,
low porosity,
high strength,
low specific gravity,
good thermal shock resistance,
high elastic modulus and
corrosion resistance
are required.
These characteristics are the basis for the application of these materials in many fields like mechanical engineering, heat technology, chemical engineering and medicine. | | |
 |
Ceramic membranes
Ceramic membranes offer specific advantages in separation techniques:
Chemical, mechanical and thermal stability
Ability of steam sterilization and back flushing
High abrasion resistance
High fluxes
High durability
Bacteria resistance
Possibility of regeneration
Dry storage after cleaning. | | |
 |
Components for ceramic differential pressure sensors
We manufacture components useful in ceramic differential pressure sensors (capacitive principle). Sensors equipped with these components are suitable to measure differential pressures smaller than 1 Pa.
Possible applications are devices of the medical technology, e.g. in the artificially respirating technology and in household appliance for sleep apnoea therapie.
Further applications are sleep monitoring of babies to the prevention of sudden child death. | | |
 |
Polymer ceramics - novel inorganic-organic composites
Polymer ceramic materials are inorganic-organic composites consisting of ceramic fillers and a matrix of organic polymers. The formation of the polymer ceramics is based on the chemical interaction of reactive groups on the surface of the filler particles with functional groups of the organic polymers.
Polymer ceramics combine useful properties as ceramic-like thermal stability and plastics-like high-performance and energy saving manufacturing technologies (plastic forming techniques, thermal curing up to 200�C without sintering).
Two types of polymer ceramic materials have been developed. The polymer ceramics CERMOPOL® can be processed as a granulate for dry pressing. The maximum long term service temperature of CERMOPOL® is 200�C.
The polymer ceramics CERMOSIL®- were developed to increase the thermal stability beyond 600�C. For this type of polymer ceramics a broad variety of plastic forming techniques like ceramic injection moulding, cold and hot extrusion can be applied besides dry pressing. Both types of polymer ceramic materials are distinguished by low shrinkage and therefore a high dimensional stability and precision. Furthermore they can be machined and recycled easily. Polymer ceramics have good electric insulation behaviour. Properties of the material and technological parameters can be especially adjusted and customized. This way systems with high electrical or thermal conductivity of with metal like thermal expansion behaviour and zero shrinkage for high precision parts could be developed.
The polymer-ceramic foam CERMOPOR® can be produced based on the system CERMOSIL® by the use of suitable foaming agents. CERMOPOR®-foams are not combustible, have no toxic constituents and combine inherent bonding strength and variable processing with high temperature stability. The foaming materials can be prepared as powders, pastes, or knifing fillers. Polymer ceramic foams show low thermal conductivity and good electric insulation behaviour. Basic characteristics of the foams like volume, size and structure of the pores, the density, the mechanical, thermal and electric properties can be controlled in several ways and adapted to individual requirements | | |
 |
Silk screen printable pastes made of special ceramic powders
Fabrication of screen printable pastes of special ceramic powders
Bottom layers as adhesion promoter for functional ceramic layers
Functional ceramic layers on ceramic substrates
Pastes for high temperature joining of ceramics
Anti-Sublimation layers for heaters and electrodes useful in high temperature applications
Ceramic layers for sensor applications
Diffusion barrier layers | | |
 |
Ultrapure Al2O3 membranes for capacitive pressure sensors
Capacitive ceramic pressure sensor elements are useful for pressure transducers and pressure transmitters in the most diverse ranges, e.g. in chemical process engineering and vacuum engineering.
The function is based on the capacitive measurement principle. On a rigid target two electrodes are applied, by those the internal forms the test electrode and the outer one the reference electrode. Over it in a small distance the common back plate electrode is on a pressure-sensitive ceramic membrane. For increased corrosion resistance and for the improvement of the relaxation behaviour of the sensor utilizing of highly pure membrane materials as Al2O3-materials (Al2O3-content ≥ 99,9 %) is necessary.
Our membranes are characterized by:
corrosion resistance,
highest strength and
extreme overload strength. | | |
|
|
|
|
InnovMetric Software Inc.
|
|
 |
PolyWorks
The Standard Point Cloud Engineering Solution | | |
|
|
|
|
INNOTEC - Netzgeräte GmbH
|
|
 |
DC-UPS power supplies
These types of power supplies are used to hold the DC-output voltage at a stable level during a line failure for a limited time. These power supplies are used in industrial and safety applications. The safety of a system depends mainly on a safe supply. Even the best electronic system will not work if the line fails. Standard power supplies have hold-up times up to 20 ms for short line failures. Depending on the system safe operation times are from seconds | | |
 |
Laboratory power supplies "Standard"
These power supplies are linear controlled. The ripple on the output voltage is very low and contains no HF-noise. Based on the innovative circuit layout a high power density is achieved with only a small amount of power loss.
Most of the power supplies are equipped with a convenient presetting of the voltage, current and OVP. The outputs are electronically switchable.
The power supplies can be used in either constant voltage or current mode. The voltage is adjusted by 10-turn potentiometer for a good resolution and easy setting. The power supplies are equipped with temperature-controlled ventilators. All power supplies are protected against permanent short circuits, overloading and inverse currents.
The outputs are galvanically separated and can be used serial or parallel. The power supplies are developed and produced according to standard EN61010 for laboratory equippment. The output voltage of outputs with less than 60 Vdc are SELV voltages. The power supplies can be optionally controlled by external analog signals (voltage and current).
Guarantee: These power supplies have a 5 year warranty.
Notice: For some of the power supplies are datasheets as pdf-files available. To start the download, please click the Type specification.
| | |
 |
Linear controlled 19" plug-in power supplies
For highest quality in control and lowest ripple the linear controlled power supplies type SMCP are the best choice.
To guarantee superb technical performance the transformer is located separately from the control electronics to prevent direct coupling of parasitics from the line to the control circuit. Only linear-controlled power supplies deliver output voltages with such a low ripple and high stability. These power supplies are mainly used in measurement applications. All outputs are equipped with sense lines to compensate the voltage loss on the output lines. The 5V outputs are equipped with an overvoltage protection circuit (OVP) to protect the load from overvoltage.
The supply voltage is a low AC voltage. Based on the application an external ring core transformer or a ferroresonant transformer can be used. A ferroresonant transformer reduces line disturbances up to 80 dB and compensates the voltage variations from the line. The power supplies are made to fit in a 19" rack with 3 units height.
Guarantee: This power supplies have a 2 year warranty.
Notice: For some of the power supplies are datasheets as pdf-files available. To start the download, please click the Type specification. | | |
 |
Magnetic controlled power supplies
Type MAG power supplies are made simple, have high output power and a high reliability even under bad environment conditions. These power supplies are made for rough industrial use.
Based on the ferroresonance principle, the noise reduction can be up to 80dB for line disturbances. In respect of the few elements used for such a power supply the reliability is very high. The power supply needs no service and no special protection. It can handle up to 50% overload for a limited time.
The resonance circuit on the transformer is the basic part for the control of the output voltage and the noise reduction. The advantage over switch mode power supplies is the additional controlled 230 Vac output (MAG 480 and MAG 960).
Type MAG power supplies have a low feedback to the line and do not need an additional power factor correction circuit (PFC).
These powersupplies can easily be converted in DC-USV power-supplies.
Guarantee: These power supplies have a 2 year warranty.
Notice: For some of the power supplies are datasheets as pdf-files available. To start the download, please click the Type specification.
| | |
|
|
|
|
Ingrif
|
|
 |
Clam bucket for bulk material handling
- Handling solutions for the metals industry, loose products such as minerals, forestry products, industrial trash, domestic garbage etc.
- Electro-hydraulic or mechanical grabs with 4 or 8 arms, clamshell grabs, suitable for any density, wide range of lifting capacity.
- Underwater grabs. | | |
 |
Coil lifting magnet
Electromagnets, Lifting Magnets
The Lenoir Magnetic Systems lifting magnets handle any kind of hot or cold steel products. Hot items from the production plant, finished steel coils from the warehouse, scrap from the recycling unit etc. By their sturdy design and conception these equipments are perfectly suited to harsh environments | | |
 |
Handling pliers
Lifting tongs for steel products
The Slingofer hoisting tongs handle any kind of hot and cold steel products, be it ingots from the continuous casting or finished steel coils from the warehouse. Other models are dedicated to the handling of equipments in a steel production plant, such as rolls, electrodes, pallets etc. | | |
 |
Hot steel lifting magnet
Electromagnets, Lifting Magnets
The Lenoir Magnetic Systems lifting magnets handle any kind of hot or cold steel products. Hot items from the production plant, finished steel coils from the warehouse, scrap from the recycling unit etc. By their sturdy design and conception these equipments are perfectly suited to harsh environments. | | |
 |
Lifting magnet
Electromagnets, Lifting Magnets
The Lenoir Magnetic Systems lifting magnets handle any kind of hot or cold steel products. Hot items from the production plant, finished steel coils from the warehouse, scrap from the recycling unit etc. By their sturdy design and conception these equipments are perfectly suited to harsh environments | | |
 |
Package lifting clamp
Lifting tongs for steel products
The Slingofer hoisting tongs handle any kind of hot and cold steel products, be it ingots from the continuous casting or finished steel coils from the warehouse. Other models are dedicated to the handling of equipments in a steel production plant, such as rolls, electrodes, pallets etc. | | |
|
|
|
|
Ingersoll Rand Fluid Technologies
|
|
 |
Diaphragm Pumps
Ingersoll Rand / ARO Diaphragm Pumps provide stall-free, ice-free operation. Their patented “Unstallable” unbalanced air valve design avoids stalling issues associated with other pumps. The “Quick-Dump” exhaust valves divert cold exhaust air from ice-prone components, preventing freezing. Backed by a five-year warranty, we have the most reliable pump line on the market today.
Compact Pumps 1/4", 3/8", 1/2" & 3/4" ports
Ideal for OEM and General Industrial applications where peak performance, endurance, and reliability are a must, our compact pumps feature big performance in a small package. With flow rates up to 14.8 GPM (56 LPM) and a large range of material and porting configurations, we have the right pump for your application.
Expert Series Pumps (EXP) 1”, 1½”, 2” & 3” ports
ARO's PROCESS GRADE, Expert Series Diaphragm Pumps feature the best total cost of ownership of any diaphragm pump on the market. A favorite among process professionals, the EXP Pump family provides optimum energy efficiency and downtime solutions. With flow rates up to 275 GPM (1041 LPM) and a large range of material and porting configurations, ARO has the right pump for your application.
Pro Series Pumps 1”, 1½”, 2” & 3” ports
ARO's INDUSTRIAL GRADE, Pro-Series Diaphragm Pumps provide high performance and stall-free reliability. With flow rates up to 237 GPM (897 LPM) and a large range of material and porting configurations, we have the right pump to match your application needs.
Specialty Application Pumps
Utilizing technology identical to other ARO Pumps, these Specialty models will provide the same high level of performance and satisfaction but in a design tailored for your specific application. Specialty pumps include: Drum Packages, Flap Valve pumps, Powder Transfer pumps, High Pressure pumps, Sanitary Transfer pumps, Natural Gas Operated pumps, Centrifugal De-watering pumps, and Fuel Pumps
| | |
 |
piston pumps
ARO piston pumps provide industry proven dependability, economy, and precision control for the delivery of a wide range of flowable materials. The efficient, simple design and construction of ARO piston pumps are the reason they are recognized as one of the most dependable, versatile and accurate on the market. Whether you’re moving a small amount of low viscosity fluid a few feet or a large amount of high viscosity material a longer distance, ARO has a pump to meet your application needs.
Pneumatic Driven Pumps & Packages
Ingersoll Rand / ARO pneumatic piston pumps have been used for decades to increase productivity and minimize the costs associated with transferring, extruding and applying a wide range of fluid and semi-fluid materials. Let our pumps contribute to your bottom line by minimizing downtime and increasing efficiency.
Hydraulic Driven Pumps
ARO hydraulic-powered piston pumps offer the same great quality and reliability as air operated pumps with increased versatility and efficiency. Hydraulic-powered pumps are a great choice when compressed air is limited or when enhanced efficiency and lower noise levels are preferred.
Piston Pump Accessories
Use only genuine ARO accessories and replacement parts to assure compatible pressure rating and longest service life possible. ARO offers a full range of parts and accessories to help you obtain the best results in your operation.
Piston Pump Feature Tour
Whether you’re moving a small amount of low viscosity fluid a few feet or a large amount of high viscosity material a longer distance, ARO has a pump to meet your application needs. See what differentiates our pumps from others on the market by taking the Piston Pump Tour.
| | |
|
|
|
|
Ingersoll Machine Tools Inc.
|
|
 |
Body die components at 6 meters/minute....
MASTERCENTER'S nutating spindle unit with a built-in rotary axis provides for 5-axis contour machining with large diameter face mills or end mills. | | |
 |
Ingersoll Machine Tools
Ingersoll Machine Tools are at work making important products of cast iron and steel, of aluminum and titanium, and of advanced composites. We serve these industries worldwide: automotive, aerospace, construction, agriculture, power generation, and primary metals. Products range from general purpose machines such as the MASTERCENTER to aluminum scalpers; from advanced fiber placement machines to massive High Velocity Aerospace Aluminum Profilers. | | |
 |
machine tool solutions
introducing the next generation of machine tool solutions for the die & mold industry. | | |
 |
New levels of performance to 4-sided, 5-axis contour machining....
The Octahedral Hexapod is ideal for multiple-axis contour machining and the high-speed, high precision production of plastic injection molds and stamping dies.
Ingersoll's patented approach combines the rigidity of the closed Octahedral frame with the inherent stiffness of the Hexapod structure. Like a truss, each of the six struts on the Ingersoll Octahedral Hexapod are under tension and compression. This eliminates the structural bending moments that are created on conventional orthogonal machines. This combination provides unparalleled machine rigidity/stiffness for better part accuracy, surface finish and increased tool life
| | |
|
|
|
|
Inge AG
|
|
 |
dizzer220.
dizzer220. | | |
 |
dizzer 3000-5000
dizzer 3000 dizzer 5000
Membrane surface 30 m2 50 m2
Length of the module 1180 mm 1680 mm
Mounting Vertical
Capillaries Multibore
Operating mode (Filtration) Dead-End, Cross-Flow
Operating mode (Reinigung) Backwash, Forward Flush
| | |
 |
dizzer 5000 SB
Membrane surface 30 m2
Length of the module 1680 mm
Mounting Vertical
Capillaries Singlebore
Operating mode (Filtration) Dead-End, Cross-Flow
Operating mode(Reinigung) Backwash, Forward Flush
| | |
 |
T-Rack
Easy rack-and-ready-installation
In the T-Rack, 8 dizzer®5000plus modules, each with 50 m² of membrane surface area, are combined to form one basic unit. The rack headers are integrated in the module endcaps.
Advantages at a glance
easy rack-and-ready installation
stress-free rack headers integrated in module endcaps
enormous space-saving
up to 50 % less footprint
optimized rack solution
save costs and time
high membrane surface area without difficult handling
no additional personnel assistance or cranes | | |
|
|
|
|
Ing. Gerhardt Höfer & Co. Maschinenproduktions-gesellschaft m.b.H
|
|
 |
Hydraulic press
Hydraulic press EXPERT
The expert class offers you decades of high working safety. Pressure is well distributed by both large and small workpieces ensuring maximum profitability. | | |
 |
Solid wood slate press MHP with edge gluer
We designed this machine, taking into account the trend for solid wood usage. It can be used for both hard and soft wood. A newly developed bonding technique ensures high profitability. | | |
 |
VENEER- and PANELSAW "FSP - Automatic"
The newly developed veneer and panel saw FSP-Automatic, has been adapted to suit the requirements of the present-day manufacturing processes. Because of its future orientated total concept, featuring
- central control of all machine functions
- double linear guide systems
- synthetic safety cover for the cutting area
- automatic cutting procedure sequence
the rationalization potential can be expanded.
For the cutting of all tiypes of veneer, wood and chipboards, panels with synthetic or veneered surface, plexiglass, non-ferrous metals and various panels used in the construction branch.
For the veneer and panel saw FSP-A there is a number of additional equipment making it possible to equip your machine to suit a varies of applications. Thanks to the modular construction, components can be added later.
| | |
 |
VENEER- and PANELSAW "FSP"
Reliable veneer- and panel saw with pneumatic pressure beam and massive base construction. The finishing cutter ensures high cutting quality which is of extreme importance when cutting hard and brittle veneers or thick veneers. | | |
|
|
|
|
INDUSTRIAS PUIGJANER S.A
|
|
 |
Circular shears
Specific machines to cut blanks and rings with a circular cutting roller. These machines are able to cut from 0.2 to 12 mm. steel thickness and diameter up to 5 meters. | | |
 |
Edge trimming machine
These trim, mark, bead and seam round and polygon shaped parts, formed either by first operation pressing or spun processes. | | |
 |
Flow Forming Lathes
The flow forming lathes can work starting from a blank or a pre-form getting from the initial thickness the desired final length. The volume of the material keeps unchanging. | | |
 |
Necking Machines (CTA, CTS)
These machines deform tubes that have been pre-heated before in order to ease the deformation of the material.
They are equipped according to their application and its final use. There are different processes and devices to heat up the tubes: gas, induction, … These devices can be installed on the same machine or separately.
| | |
 |
Tube necking machine
These are capable of hot closing tank-ends and pressure tanks up to 350 mm in diameter.
Avialable as either hydraulic sensitive, automatic or CNC compatible. | | |
|
|
|
|
Industrias Hidráulicas, S.A
|
|
 |
Moros GC-F, GC-J, GC-H Series Three Compression Scrap Balers
Reliable.
Heavy-duty construction.
Shearing and compression action.
Continuous production.
Available bale sizes; 12"x12", 16"x16", 20"x8", 20"x20", 20"x24", 24"x24".
For baling of ferrous and non-ferrous scrap. | | |
 |
Moros H-P Series Shears: "Adjustable Angle Side Squeeze Compression"
With the "Adjustable-Angle" Side Squeeze Compression System you are offered an enormous advantage compared with other designs.
The Adjustable Side Squeeze Compression System is extremely effective for quickly precompressing heavy bulk scrap, including such items as tanks and boilers.
The Shear can be installed on a flat slab
Additional options available:
Hydraulic pre-loading hopper.
Horizontal side reducer.
Full Automatic programing.
Extra wide "full-lid".
Remote control | | |
 |
Scrap Baling Presses
Scrap Baling Presses
| | |
 |
Scrap metal baling press / guillotine shears
Scrap metal baling press / guillotine shears
| | |
|
|
|
|
Intelligente Sensorsysteme Dresden GmbH
|
|
 |
Customer-specific Sensors
Owing to our various and experience of many years in the development and the serial production of sensors we have an extensive knowledge and potential, so as to convert your requirements fast, solution-oriented and efficiently. We develop and manufacture sensors for them regarding
Safety critical applications
Harsh environmental conditions
Tailored assembly and packaging
Special mounting conditions
Multiple measuring quantities
Cost optimizing
Other specific requirements
Please send us your enquiry for your specific sensor. We are in a position to develop together with you a specific sensor which will be exactly suitable for your applications.
| | |
 |
Pressure Sensors
Our family of pressure sensors is based on technologies adapted to application (stainless steel, ceramics, silicon). A large number of available pressure ports, electronic modules and types of connector plugs allows their flexible application. The mechanical as well as the electronic design is perfectly suitable for automotive and industrial applications. The calibration of pressure sensors is performed by using state-of-the-art, highly productive electronic trimming technology in self-designed highly efficient calibration systems. The pressure sensors are characterized by the following features:
For automotive, hydraulic and industrial applications
Pressure from 0 to 2200 bar
Media-compatible design
Total error band ≤ 1%; including temperature errors from 0 to 90°C
Cost-efficient
High quality and reliability
Protection and diagnostic features
Certification for CNG and LPG applications
Special designs for hydrogen applications
We have summarized general information and explanations in respect of our pressure sensors. An overview about our pressure sensor portfolio you will find in our Summary of Pressure Sensors (45kB). All associated data sheets are available in the download area.
The particular pressure sensor, which conforms exactly to your requirements, you will find by way of our selection form.
| | |
 |
Temperature Sensors
The temperature sensor families are based on a media-compatible technology. The mechanical as well as the electronic design is perfect for automotive and industrial applications. They have a short response time and are particularly suitable for applications with high pressures and temperatures. The calibration of the temperature sensors is performed by using state-of-the-art, highly productive electronic trimming technology in self-designed highly efficient calibration systems. The temperature sensors are characterized by the following features:
For motorcar manufacturing, hydraulic and industrial applications
Temperatures from -40°C up to +800°C
High ambient pressures
Media-compatible design
Total error band ≤ 1,5%
Cost-efficient
High quality and reliability | | |
|
|
|
|
INTERLUBE SYSTEMS LTD
|
|
 |
AX RANGE
The automatic multi-line AX Range provides centralised lubrication at a fraction of the cost of conventional grease systems. They are constructed of waterproof and corrosion resistant materials, making them ideal for all types of industry and can be used on applications with up to 60 points where a multi-line system can be installed.
The AX Range are of self contained, automatic, electrically driven pump units, available with a maximum of 60 outlets in a choice of 110 or 240 volt rating. Larger models for special applications can also be supplied.
Integral pumping units deliver a precise volume of lubricant to each bearing feed line and in the event of accidental damage to one line the remaining lines are unaffected.
| | |
 |
LUBEPLUS E
These products are suitable for applications with up to 20 lubrication points, such as small machine tools, woodworking and printing machines. Ideal for preventing your worst-case scenario from occurring as it provides the essential lubricants to all specified lubrication points in exact amounts.
They are a low cost, compact lubrication system which is successfully proven over many years in the small to medium size machine range. The pump supplies up to 20 flow units, calibrated to apportion oil to the specific bearing requirements.
Lubeplus 'E' is a compact automatic cyclic lubricator designed for use with the Interlube single line flow unit system.
Recommended Lubricant: Oil 10-1800 cSt. Operating Pressure:3.5 bar max
| | |
 |
LUBEPLUS GX
The Lubeplus GX is ideally suited to mechanical applications and plant used in the food processing, packaging and printing industries. Can accommodate systems with up to 200 lubrication points.
Lubeplus GX is designed to operate with a positive displacement unit (PDU) or with metering flow unit systems. The lubricator is available with a wide combination of condition monitoring features and a choice of 'with' or 'without' microprocessor control.
Gear Pump operation
Max. operating pressure 25 bar
Can use Oil or fluid grease
Available in 3 or 6 litre reservoirs.
Supply voltages 110v or 240 | | |
 |
LUBESHOT
MANUALLY OPERATED - SINGLE LINE METERED SYSTEM
Ideal for applications with up to 20 lubrication points, such as small machine tools, lathes, woodworking and printing machines.
Lubeshot has been specially developed for use on smaller machines where manually operated single line proportionate lubrication is preferred. The advantages of centralised lubrication are well established. When a properly installed and operated Lubeshot system is used on a machine its bearing life is considerably extended and maintenance costs reduced.
Hand Operated Pumps
LT / HO Range
Oil only
| | |
 |
RADIAL GREASE SYSTEMS
ELECTRICALLY OPERATED- CENTRALISED LUBRICATION SYSTEM
Ideally suited for plant in continuous operation: Steel Works, Cement Works, Rolling Mills, Large Cranes and Sewage Processing.
Designed for heavy duty performance and reliability, these multi-line radials are equipped with integral pumping units which deliver an adjustable volume of lubricant to each bearing feed line.
A maximum of 30 outlets is provided. Additional points may be covered by distribution blocks.
Radial Systems
MR/AF Range
Lubricants incl. Grade 2 grease
Ideal for larger installations such as steel works, fixed plant and coal mines
Radial Major & Minor pumps are available for direct drive (parent machine) or as complete motorised/reduction drive assemblies. Lubricant delivery is provided by individual adjustable pumping units located radially around the pump body and actuated by an internal cam.
| | |
 |
SLX Range
ELECTRICALLY OPERATED-SINGLE LINE SYSTEMS
The SLX Product Range - suitable for medium to large machine tools, fixed plant in quarries, steel works, coal mines, cement works and large cranes where a choice of lubricant from SAE 90 oil to NLGI grade 2 grease is required. | | |
|
|
|
|
ITT Engineered Valves
|
|
 |
Ball valve
Cam-Tite ball valves are engineered to provide the very best performance for demanding hazardous and corrosive applications. Designed to overcome such inherent valve problems as high operating torque and stem leakage, Cam-Tite ball valves feature a unique, non-spherical ball with a bevel at the lip of the port. This configuration minimizes pressure on the seating areas, thus reducing cold flow and prolonging seat life. | | |
 |
Dia-Flo Weir Diaphragm Valve
Caustic Applications
Dia-Flo WeirDia-Flo Weir Diaphragm Valve
Applications: causticizers
Offering corrosion resistant coatings and diaphragms, plus a wide range of linings, the Dia-Flo valves provide an excellent, yet economical, barrier to chemical attack and corrosion.
• Virtual absence of cavities makes it the ideal valve for slurry applications
• Bubble tight shut-off down to 0.1 microns
• All working parts are isolated from the process fluid | | |
 |
Diaphragm valve
Dia-Flo diaphragm valves are the workhorses and foundation of Engineered Valves' product offerings. Durable, dependable Dia-Flo diaphragm valves are engineered for tough work environments in the chemical processing, water treatment, pollution control, food and beverage, mining, pharmaceutical, pulp and paper, and power generation industries. ITT is a leader in valve technology and the foremost innovator of diaphragm type valves. The diaphragm valve is dependable, cost effective and versatile and is installed across the world in virtually every type of process plant. | | |
 |
Fabri-Valve C67
The Fabri-Valve Figure C67 provides bubble-tight, bi-directional shutoff with its patented perimeter seal. The seal is retained in the valve body by its trapezoidal shape. A relief has been cast into the valve body. The relief greatly reduces seal compression set; the shape of the seal eliminates leakage due to seat rollover, and seat pullout.
Maximum temperature rating is 400°F (214°C).
The C67 can be equipped with several options to extend the life:
* Hardened steel gates
* Ceramic-lined gates
* Chest liners prevent solids entrapment in chest area and also provide increased gate support | | |
|
|
|
|
ITL INDUSTRIES LTD.
|
|
 |
| | |
 |
horizintal bandsaw machines
twin column construction horizintal bandsaw machines | | |
 |
tube staightening machine
staightening machine | | |
 |
sawing machine
circular sawing machine | | |
|
|
|
|
ITEC GmbH
|
|
 |
Chain divider
Fully automatic separation of sausage products
| | |
 |
Clip removal
Fully automatic removal of the clips
| | |
 |
Manual and automatic soap and disinfectant dispenser
Hygienical dosage of soap and disinfectant
Soap and disinfectant dispenser
A) Sensor-controlled automatic dispenser
with 2-litre-bin and adjustable dosage
B) Arm lever dispenser of highly shock-resistant plastic
with 1-litre-bin and adjustable dosage
C) Arm lever dispenser of stainless steel,
material no. 1.4301, with 1- litre-bin | | |
 |
Packing systems
Attec Danmark A/S and ITEC Germany offer solutions for packing fresh products into film or plastic bags.
The packing ensures that the durability demands and a correct hygiene standard are observed during storage and transportation.
The arrangement and efficiency of the working places in the packing area is optimised by a correct ergonomic composition.
| | |
 |
Sausage production
Within the sausage production there are some processes, which today are possible to automate. The automation increases the yield and the quality of the final product. | | |
 |
Through-type storage systems
Completing storage for the optimum task execution | | |
|
|
|
|
Italpresse Engineering SpA
|
|
 |
CABINET ASSEMBLING CLAMPS AND PRESSES
A full range of clamping presses for assembling furniture parts, drawers, writing desks and frames in general.
Available in mechanical, hydraulic and mixed versions.
Manual loading, or automatic with a conveyor belt.
High manufacturing accuracy is guaranteed by superior-quality mechanical components and numerous NC machining processes.
Configurable with various options to personalise the process according to the type of assembly.
| | |
 |
COLD PRESSES - STANDARD MODELS
| | |
 |
EMBOSSING AND MOLDING PRESSES
vast range of heavy hot/cold hydraulic presses for forming and molding by means of steel or aluminium dies/molds.
They are used for numerous applications with various types of material, including solid wood, plywood, MDF, HDF, hardboard, plastic, aluminium, light alloys and composite materials.
These presses by ITALPRESSE are much appreciated in the car industry, where they are used for making briarwood and aluminium inserts, insulation panels for engine and passenger compartments, as well as decks for vans and lorries. Please take a look at the section of this catalogue named ‘AUTOMOTIVE ‘
Special technology has been developed for producing shaped door-skins made of thin MDF (GL/HD).
Available in various sizes and with various powers/pressures, with closing from above or below, and electric or thermal oil heating system.
They can be configured at will thanks to a large number of optional devices that can be used to adapt the press to your personal requirements.
Control of the pressing functions and the cutting/deformation depths is extremely accurate, with computerized interfaces and colour graphics for plotting and monitoring particular pressure or temperature curves.
High manufacturing accuracy is guaranteed by superior quality mechanical components and numerous NC machining processes.
| | |
 |
FRAME CLAMPS
Frame clamping presses by Italpresse are indispensable for assembling door and window frames, solid doors, French windows, indoor and outdoor shutters and numerous other types of frames.
Italpresse’s vast range of clamping presses meet the production requirements of all categories of customers, from small businesses to large manufacturers.
The basic configuration of each clamping press can be completed by a whole series of optionals. All the machines come in numerous sizes.
Series production using these machines is a guarantee of superior quality and affordable prices.
High manufacturing accuracy is guaranteed by superior-quality mechanical components and numerous NC machining processes.
| | |
 |
HOT PRESSES - STANDARD MODELS
A vast range of hot presses for all kinds of application: all types of glueing, forming, skimming, bending, drawing and so on.
Hot presses by ITALPRESSE are used in many different sectors, including the manufacture of furniture, door and window frames, parquet flooring, doors and wooden items in general, the plastics industry, motor vehicles and aircraft, insulated panels, buildings and so on.
The presses come in various sizes and powers/pressures, with closing from above or below.
They can be configured at will thanks to a large number of optional devices that can be used to adapt the press to your personal requirements.
High manufacturing accuracy is guaranteed by superior-quality mechanical components and numerous NC machining processes.
High quality and competitive prices are guaranteed by ITALPRESSE’s mass production
| | |
 |
MEMBRANE PRESSES
THE STATE OF THE ART IN MEMBRANE PRESSES: ITALPRESSE’S RANGE
Thanks to lengthy experience in designing and developing membrane presses for the wood industry, ITALPRESSE now turns out a huge range of membrane presses with specific features designed to meet all possible production requirements.
Membrane presses are widely used for 3D coating shaped wooden panels with thermoplastic sheeting, sliced veneers, laminated plastic sheets and transfer foils.
Typical products are furniture doors, desk and table tops, shelves and three-dimensional rustication panels for doors of all sizes. New applications are added all the time thanks to the users’ ideas and imagination.
The ongoing quest for new applications is supported by the manufacturers of the materials used - mainly glues and thermoplastic sheets - who continually market new technologies and innovative designs.
In such a dynamic situation, membrane press manufacturers should never feel complacent - technological solutions that appear to be ideal today may well be obsolete by tomorrow.
ITALPRESSE’s philosophy has always been to develop different products for different requirements, identifying the advantages of each technology with reference to each type of application.
This is why ITALPRESSE’s range of machines includes FLUID-OPERATED MEMBRANE PRESSES, AIR-OPERATED MEMBRANE PRESSES and AIR-OPERATED MEMBRANELESS PRESSES.
The range of loading systems includes presses for HAND, TRAY MOTORIZED BELT LOADING. High output systems are also available, such as the MULTI-TRAY CAROUSEL, with return below or at the side of the press.
The already long list of basic equipment can be completed with optional devices, such as SHEET UNWINDERS/TRIMMERS, tray PARTIALISERS and KITS FOR ECOLOGICAL MATERIALS.
A special mention goes to the exclusive PSS, a revolutionary panel-supporting system that entirely eliminates the need for templates or panels for coating with thermoplastic sheets. Ease of use, efficiency and reliability are the strengths of this system.
| | |
|
|
|
|
I.S.V.E.
|
|
 |
Four shaft shredder
shredders, combined systems and granulator grinders customised to meet customer requirements.
Its plants have been widespread for years in all European and in many extraeuropean countries.
ISVE products come in 3 lines:
“Tritotutto” industrial shredders line are machines specifically made to shred both urban and industrial wastes such as plastic, paper, cardboard, wood and packagings, fruit shells, fruit stones hide scraps and leather, barks, cans, tyres, waste wood, etc.
Models range from the smallest and simple one (5,5 KW) to the model with a larger loading inlet and higher performance, with the installed power capacity up to 30 KW.
Please visit the “shredding demo videos” area of our website, to see this versatility.
“Combi” series: shredder with an in-line granulator, capable of producing final chips ranging between 12 and 4 mm suitable for shredding bulky plastic material, paper documents and wood.
Industrial single-shaft shredders with hydraulic pusher-drawer, complementary systems for double and four shafts shredders.
These machines complete the range of I.S.V.E precrushing system. Said machines are particularly suitable for shredding high specific weight elements such as plastic blocks, big pieces of wood, pallets, paper documents, extruded polymer pipes, etc | | |
 |
One shaft shredder
"M" SERIES SHREDDERS
Alongside the traditional 4-shafts equipped shredders, I.S.V.E. proposes a series of single-shaft equipped shredders with pusher-drawer.
These machines are purposely studied to shred thick materials and highly resistant to cut such as plastic blocks and sheets, various types of timber, paper, extruded polymer pipes, etc.
Operation drawings:
A pusher-drawer with hydraulic drive pushes the material towards a tools-holder roller which carries out the first breaking and thanks to its rotation and to the COUNTER-BLADE action makes a first breaking and the shredding of the product.
The product passes through a drilled screen, which allows establishing the final sizes of the material. | | |
 |
Spraying impregnation machine for wood protection
SPRAY MATIC series Impregnation-Spraying Machine
(SPRAY MATIC 250/100, 300/300, 300/400, 300/600)
Spraying machine made for applying solvent or water based impregnating products, on square, rectangular, circular or shaped wooden profiles or beams.
The items are at first impregnated with the atomised product and then brushed to remove any excess primer. The result is uniform treatment and colouring of all the surfaces of the profile, without smears or stains. | | |
 |
Vacuum impregnation machine for wood protection
Vacuum-Pressure Impregnation Plants mod. IMP-VAC
(IMP-VAC 4- 6- 7- 8- 10 -12)
It is composed by two autoclaves laid one upon the other or by a single autoclave subdevided in two chambers.
The two tanks contain respectively the preservative and the wood to treat. | | |
|
|
|
|
Iseli & Co. AG Maschinenfabrik
|
|
 |
Leveling
Products Leveling | | |
 |
Sharpening
Products Sharpening | | |
 |
Side-grinding
Products Side-grinding | | |
 |
Stellite-tipping
Products Stellite-tipping | | |
 |
Swaging
Products Swaging | | |
|
|
|
|
Iscar Ltd.
|
|
 |
HELIDO845
45º endmills and facemills with double-sided inserts in
a diameter range of 25-125 mm
ISCAR is introducing a new, unique family of 45° milling cutters.
The new tools can carry in their pockets either the
S845 SNMU 1305... - square, double-sided inserts with 8 cutting edges or the ONMU 0505... octagonal, double-sided inserts with 16 cutting edges - the most economical insert regarding price per cutting edge. Both inserts have helical cutting edges and positive rake angles, featuring low power consumption and excellent surface finish. The new inserts are available in the most advanced SUMO TEC carbide grades.
In the first stage, ISCAR will introduce the following SOE/SOF45 8/16 tool range:
• Endmills in diameters 25 to 40 mm
• Face mills in diameters 40 to 125 mm
| | |
 |
HELITURNTG SIN
New Ceramic HELITURN Inserts with a Molded Chipformer
ISCAR is introducing new HELITURN LNMX 1506..R/L-HT IS8 ceramic inserts with a molded chipformer. The new inserts combine the advantage of the HELITURN tangentially clamped insert system with the ceramic grade and a sophisticated molded chipformer. The tangential clamping is most important when using ceramic inserts, as by means of this method bending forces are practically eliminated from being exerted on the insert. The new insert can be used for high speed machining (500-1000 m/min) of cast iron. The LNMX 1506..R/L-HT IS8 insert is the ultimate solution for Fast Metal Removal when machining disk brakes, flanges, valves and other mass production parts made from cast iron. | | |
 |
MAXIN
Power Chuck - Heavy Duty Clamping Power for
Fast Metal Removal
With the MAXIN tool, only a small tightening torque compresses the frontal nose, providing an extremely high gripping force.
It is designed for roughing and finishing applications in milling where high torque transmission, maximum accuracy, compactness and easy operation are required.
Features:
● The clamping nut is not threaded (as in ER collet chucks)
● Designed for direct chucking of the tool shank (no need for intermediate collet) for maximum gripping force
● Sealed nut construction
● No axial drawback of the tool shank as chuck is tightened
● Thick wall construction to withstand greater side loading forces
The high gripping force achieved by the MAXIN Power Chuck results from the shallow nose tapered cone with helical slot inside the internal chuck bore. It exerts a very high clamping force when the clamping nut is rotated in the axial direction. The shallow taper of the tool nose and the angled position of the needle bearing
that sit in the cage create the axial movement of the clamping nut.
This unique clamping mechanism eliminates axial movement of the shank while clamping, simplifying the preset process.
Runout Accuracy: Maximum runout at 100 mm
Overhang is less than 0.01 mm | | |
 |
PENTA 34
A New, Larger PENTACUT Insert for Economical Grooving,
Parting and Recessing
Following the very successful performance in parting and grooving of the PENTA 24 pentagonal insert, ISCAR has developed the PENTA 34 - a larger insert, for up to 10 mm depth of cut.
Like the smaller PENTACUT insert, the PENTA 34 can be used for multifunction applications including grooving, parting, recessing and chamfering.
The new family features:
• A stronger insert for higher machining parameters.
• A modified C-type chipformer with an expanded feed range of
0.05-0.25 mm/rev.
• Excellent straightness and surface quality, especially on groove
bottoms and sidewalls.
• Very rigid clamping design.
• Five cutting edges, which provide the most advantageous price
per cutting edge. | | |
 |
SOLIDDRILL
Long Solid Carbide Drills
ISCAR's new family of long solid carbide drills (up to 22*D) comprises drills in the diameter range of 5 to 10 mm. These drills feature low cutting force, excellent chip evacuation and have coolant holes through which M.Q.L. can be induced.
M.Q.L. is a very efficient method to protect the cutting edge, lubricate the machined surfaces, and help to push the chips out along the chip gullets. It is very economical and environmentally friendly.
The drills are made from ultra-fine solid carbide and are TiAlN coated, combining high toughness and wear resistance.
In addition to general use application drills, ISCAR offers drills with dimensions specially designed for the automotive industry applications crankshaft lubrication holes, engine blocks, connecting rods, etc. Deep hole drills are also widely used in the die and mold industry and for machine tool parts. | | |
 |
turning
turning | | |
|
|
|
|
IPTE Germany
|
|
 |
ATF Axial Tape Feeder
Efficient and Productive Feeding
Integrated Lead Cutting and Bending Unit
Wide Component Range
Easy Readjustment
Excellent Price-Performance Ratio
Intelligent Communication with Placement System
Easy User Interface
Fits All OFP-Equipment | | |
 |
BAT Dispensing Cell
Multiple Nozzle Applications
G-Command Based Dispense Profiles
High-Speed Precision In-Line Dispensing System
Modular Cell Structure for Easy Integration into PCB or Final Assembly Lines
PCB or Carrier Transport
Modular Dispensing System
High Process Reliability With Auto Weighin, Calibration and Needle Check
Wide Variety of Applications | | |
 |
BAT Inkjet Cell
High Speed In and Off-Line Inkjet Printing System
Low-Cost In-Line Printing
Modular Cell Structure for Easy Integration into PCB or Final Assembly Lines
PCB or Carrier Transport
Easy Configuration and Application Software | | |
 |
SpeedMounter²
Flexible and Modular Odd Form Component Placer
In-Line and Off-line Capable
For ‘Standard’ Odd Form Components and Special Applications
Maximum Efficiency and Productivity
Small Footprint
Rotational Head for Fast and Efficient Placement
Intuitive Operator Interface | | |
 |
SpeedRouter
Depaneling system
High Speed, Low Stress, Separation Process
Linear Motor Technology
Robust Cast Aluminum and Granite Construction
Broken Bit Detection with Automatic Tool Change
Capable of Routing and/or Sawing
In- and Off-Line | | |
 |
SpeedRouter
Depaneling system
High Speed, Low Stress, Separation Process
Linear Motor Technology
Robust Cast Aluminum and Granite Construction
Broken Bit Detection with Automatic Tool Change
Capable of Routing and/or Sawing
In- and Off-Line | | |
|
|
|
|
IPSEN INTERNATIONAL GmbH
|
|
 |
AutoMag®
AutoMag is designed for controlling automated atmospheric and vacuum furnace lines. | | |
 |
Furnace Technology
The atmospheric chamber furnaces built by Ipsen have a modular design an are made of standardised assemblies | | |
 |
Furnace Technology
With Ipsen's vacuum furnaces the advantages of vacuum heat-treatment can be used to the full. These include:
optimum hardness
bright surfaces
oxidation and decarburisation-free surface zone
little scaling, even on workpieces with a complex geometry
constant qualities
reproducibility
usable for a broad range of materials
Ipsen offers a large number of horizontal and vertical single and multi-chamber furnaces, from which customers can select the furnace type best suited for their intended heat-treatment Processes and Products. All of the furnace models can be equipped with convection systems to increase furnace throughput by shortening heat-up times, and to minimise warping of delicate work pieces.
Rotary-hearth technology
Depending on the type of charge loading and workpiece geometry, there may be dead zones around the charge not seeing any flow or surfaces exposed to most of the cooling gas. To solve this problem, Ipsen has designed a rotary hearth for vertical furnaces whose speed of rotation can be adjusted in line with cooling requirements. This eliminates uneven gas flow distribution.
| | |
 |
Gas supply systems
| | |
|
|
|
|
IPS, Innova Packaging Systems
|
|
 |
Plastic Boxes
HyBox
hygienic multi-trip packaging
The HyBox is the first hygienic mult-trip packaging that delivers substantional performances:
hygienic packaging
multi-trip
users friendliness
transport optimisation
| | |
|
|
|
|
I-Pac Technologies N.V.
|
|
 |
sippr
sippr | | |
|
|
|
|
IONBOND LTD
|
|
 |
Bernex CVD Equipment
Bernex brand CVD equipment is the reference for reliability and quality. Since it was launched in the early 1970s, the Bernex brand has been introduced in the production facilities of all major cutting tool manufacturers. Today, Bernex CVD equipment is also being used for numerous applications in addition to cutting tools, including extrusion and forming, component and medical applications. Several projects are underway with key customers that will broaden the application base even further.
Modular Approach
Ionbond's modular approach means past customers can upgrade their system with options.
Aluminum Trichloride Generator
The new Aluminum Trichloride Generator was designed to meet the increased requirement for functionality, reliability and reduction of maintenance. Based on all the experience with the previous model and customer information this entirely new Alu-Generator has fully achieved this ambitious target. The Alu-Generator comes with all necessary gas supplies and integrated temperature control for deposition of Al2O3 at temperatures ranging from 900 °C to 1050 °C.
Gas Neutralization System
The neutralization station allows one to connect and neutralize the gases of several CVD units. This unit has the advantage to significantly extend the time of use between refilling NaOH and to space the flushing intervals.
Gas Purification System
The gas purification system removes impurities, especially O2 and H2O, from hydrogen gas stream in an effective, safe and economical manner, allowing technical grade gases to meet the need for high purity gases in the CVD process
| | |
 |
Chemical Vapor Aluminizing (CVA) Equipment
The Bernex ATL Aluvap CVA (Chemical Vapor Aluminizing) coating systems are designed to deposit an aluminide diffusion layer on hot section turbine components such as turbine blades and stators.
In the past ten years, the inlet temperature for gas turbines has risen from 1100(°)C to 1230(°)C (gas plus cooling air) and the gas itself can be as hot as 1550(°)C. Due to the high operating temperatures and extreme operating conditions, surface treatments for turbine blades (as well as other hot section parts) have been developed to combat wear, fatigue, creep, corrosion and oxidation.
The equipment is especially suitable for coating internal cooling channels that cannot be treated by pack / out-of-pack or aluminium slurry processes. Indeed, the Bernex ATL Aluvap process is superior than other processes because it offers:
Reduced waste disposal headaches inherent in pack and out-of-pack aluminizing processes
Increased flexibility and control over active reactants, ability to add other elements for enhanced performance
Cleaning of the coating is not required after the treatment process
Superior distribution of the aluminum diffusion layer
Least surface defect density
The Bernex ATL Aluvap systems are modular in order to satisfy specific user demands. The following items are available, and can also be provided as a retrofit:
Second retort for increased output
Additional gas line for coating internal channels
All graphite retort for very high temperature heat treatment
FIC (Fluoride Ion Cleaning) module using HF or CF4
Silicon doping source
Internal generators for high activity process (using AlCl)
Chromizing module
Dedicated work trays
Exhaust neutralization device
Gas purification devices
The automated Bernex ATL Aluvap CVA systems are available with different retort sizes. Special dimensions are available upon request.
The turn-key Bernex ATL Aluvap CVA systems are delivered with the most advanced process know-how and recipes to allow ready use on high temperature industrial and aero gas turbine components.
Low activity aluminizing process
High activity aluminising process
Heat treatment
Hf doped layers
Zr doped layers
Si doped layers
Chromising process
| | |
 |
PaCVD Equipment
Ionbond's Bernex Plasma-Assisted Chemical vapor Deposition (PaCVD or PeCVD) coating equipment allows for the deposition of extremely smooth Amorphous Diamond Like Carbon (ADLC) coatings at temperatures under 200° C.
ADLC coatings have an extremely low coefficient of friction, are non-conductive and chemically inert. Primary applications include engine components and machine parts.
Ionbond has also developed a proprietary coating removal process that means recoating is possible without damaging the substrate
| | |
 |
PVD Equipment
Ionbond equipment comes in a range of types and sizes to match your application and productivity needs. Ionbond is able to design and manufacture application specific equipment based on individual customer requirements.
In addition, Ionbond technology offers:
Excellent process control and coating uniformity
throughout the chamber power levels can be controlled throughout the chamber height.
Low running costs
The configuration of our coating systems means targets are affordable and little material is wasted.
Reliability, safety and ease of use
Ionbond equipment is industrially proven for reliability, safety, flexibility and productivity.
Ionbond introduced cathodic arc coating technology to the industry 25 years ago and the proven multiple source configuration is without question, the leading technology on the market for a broad range of applications including most cutting tools and stamping and forming tools.
Other applications where Ionbond coatings are used include machine and automobile components, aerospace components, medical and decorative applications.
Rapid cycle times
due to high plasma density.
| | |
 |
TetraBond Equipment
Ionbond TetraBond equipment allows the deposition of extremely hard, non-hydrogenated diamond like carbon coatings (DLC).
Door to door cycle times, generally under 3.5 hours, are much shorter than most DLC / diamond coating deposition cycles.
TetraBond can be deposited on both carbide and steel due to low coating deposition temperature (under 150(°)C).
TetraBond coatings are ideal for machining non-ferrous materials such as:
High silicon content aluminum alloys
Aluminum magnesium matrix materials
Titanium 6Al4V
Epoxy resins
Fiberglass and composites
Plastics
Graphite
Copper
Brass and bronze
One of the great advantages of TetraBond coatings is that they are suitable for recoating since they can be stripped using a proprietary Ionbond process.
| | |
|
|
|
|
INTERTRADE Kürbis & Müller oHG
|
|
 |
Hydraulic cylinders
Hydraulic cylinders | | |
 |
Hydraulic lifting cylinders
Hydraulic lifting cylinders | | |
 |
Hydraulic pumps
Hydraulic pumps | | |
 |
Shop presses
Shop presses | | |
|
|
|
|
Interspiro AB
|
|
 |
FILTER PROGRAM
FILTER PROGRAM – Clean air in every situation. Hazardous situations, harmful particles, high concentrations, long duration operations. In these situations, there is no room for compromise when it comes to respiratory protection equipment. The secure and comfortable fitting of the mask and the safe performance of the filter must be perfect for the absorption and removal of toxic substances from breathable air.
| | |
 |
Respiratory masks
Respiratory masks | | |
 |
SPIROMATIC 90U
SPIROMATIC 90U is an entry level SCBA/BA for fire fighting, excellent for industrial and maritime environments (Ships Wheel approval).
Spiromatic 90U is built upon the proven and reliable Spiromatic facemask, breathing valve and regulator – delivering Interspiro performance at a competitive price. The facemask positive pressure eliminates inward leakage of gases, vapours and liquids from the surrounding environment. Positive pressure is automatically activated by first inhalation and can never be forgotten or turned off by mistake.
The high capacity regulator is equipped with a safety valve for maximum safety. The audible warning is placed on the chest; the alarm will be heard even under noisy conditions. The harness is equipped with padded shoulder straps and easily adjusted hip belt buckles.
| | |
 |
Spiroscape
SPIROSCAPE, why purchasing a product you rarely use may be a matter of life and death. The traditional emergency escape breathing device (EEBD) is a basic emergency set to help your employees evacuate in the unlikely event of a hazardous emergency.
In the following text we will describe how the unique features of the Spiroscape will provide an enhanced safety solution in emergency escape situations. Spiroscape has a Ships Wheel approval for maritime use.
Spiroscape provides a safe solution in the following dangerous events
in the unlikely event that the apparatus fails to activate
if excessive amounts of CO² are collected in the hood during a stress filled escape
(increasing the risk of unconsciousness)
if employees cannot hear emergency instructions due to noisy airflow
an unconscious employee suffocates while wearing the escape hood
Emergencies that are dangerous to life and health do not follow a script.
They are by definition unpredictable. No company should risk the lives of dedicated employees by using inadequate solutions for unexpected emergencies. Spiroscape is the first emergency breathing apparatus to overcome the practical limitations of demand and constant flow type systems. Spiroscape avoids the problems with unpredictable duration, CO² build up and heavy cylinder weight.
By utilizing a unique air delivery system Spiroscape limits CO² in the hood, minimizes the apparatus weight and provides the user with accurate escape duration.
Emergencies are not predictable, but Spiroscape is.
| | |
|
|
|
|
Indumasch Eberhard Sting GmbH & Co. KG
|
|
 |
Bevel edge forming.
Bevel edge forming. | | |
 |
Profile bending technology
Profile bending technology | | |
 |
Punching machines-nibblers
Punching machines-nibblers | | |
 |
Universal bending technology
Universal bending technology – flexible and versatile, for a range of applications | | |
|
|
|
|
Induktor GmbH
|
|
 |
Converter
Converter | | |
 |
Toroidal transformer
Toroidal transformer with or w/o encapsulation | | |
 |
Toroidal transformer ready for plug-in
Toroidal transformer ready for plug-in | | |
 |
Toroidal transformer with magnetic shielding
Toroidal transformer with magnetic shielding | | |
|
|
|
|
II-VI Deutschland GmbH
|
|
 |
CO2 Laser Optics
Welcome to II-VI Infrared, the CO2 laser optics and infrared (IR) optics business unit of II-VI Incorporated. This site features information on our complete line of industry-leading precision optics products, including:
OEM-quality replacement CO2 laser optics and nozzles
The MP-5® ultra-low absorption focusing lens
The Variable Radius Mirror (VRM) -- also known as a deformable mirror or adaptive mirror
Scanning laser system optics for low-power applications such as marking, engraving, and via hole drilling
Information on proper cleaning and handling of CO2 laser optics
Tutorials on choosing a focusing lens, polarization, and additional topics
... and more | | |
|
|
|
|
IHT Automation GmbH & Co. KG
|
|
 |
CSC 500
The sensor system allows non-contact and precise clearance control of oxyfuel torches in cutting machines with built-in torch lifters. For high quality dry cuts. Ring electrodes measure the clearance to metallic workpieces by capacitive measurement.
Process: Oxyfuel
General Information
Advantages
works with almost all torch lifters with ± 10 V control input
touchless and precise clearance control
clearance remote control
splash repelling surface enhances ring electrode lifetime
Features
output signal ±10 V and inverted
output signal IN POSITION, ready for ignition
adjustable piercing height
collision protection while ring electrode touches the workpiece, automatic upwards movement protects the torch
built-in monitoring of operation | | |
 |
MSX 750 System
Clearance control for cutting machines
The torch lifter and automatic clearance control guarantees for precise cutting at highest quality. The system consists of a vertical linear drive and a combined sensor/motor control assembled in a single compact unit. An inexpensive solution for
many applications.
Advantages
Durable sensors for long-term stability.
Finds start position with Ring Electrode without touching the workpiece.
Connects to almost all cutting machines.
Different systems for manual torch lifter and automatic control.
For air plasma and oxyfuel cutting machines.
Cost effective system for high cutting quality.
| | |
 |
System C 1000
The C 1000 System is a compact standard solution for air plasma cutting applications. It contains the necessary functionality to provide good cuts and an optimal work piece utilisation. A precise height control is provided by the integrated ARC Voltage control.
Short stroke for flat bed machines.
Setting of cutting height and pierce height in mm.
Cost effective solution for air plasma.
Adapts to most cutting machines.
Tactile initial position finding.
Easy mounting.
Simple operation.
All essential functions provided. | | |
|
|
|
|
igus® GmbH
|
|
 |
Cable drag chains
Cable drag chains | | |
 |
Chainflex®
Chainflex® servo cables | | |
 |
Control lines
Control lines | | |
 |
Spherical plain bearings.
Spherical plain bearings. | | |
|
|
|
|
IFS Industries, Inc.
|
|
 |
Hot Melt
IFS has a full line of hot melt adhesives that bond the most difficult substrates. Our Dura Pro™ products range from 1,000 to 25,000 cps in viscosity at temperatures ranging from 120°C (250°F) to 175°C (350°F). Open times range from 2 - 60 seconds with immediate fiber tear, have heat resistance up to 200°F and come in colored, clear or opaque finishes.
| | |
 |
Reactive
Our Dura Pur™ product line is based on proprietary polymers that bond physically and chemically to substrates. Our products range from 1,000 cps to 40,000 cps at application temperatures range from 20°C (68°F) to 160°C (320°F). Open times can be formulated to range from 5 seconds to 20 minutes with immediate fiber tearing bonds and these adhesives have excellent resistance to heat, moisture and exterior aging once fully cured.
Polyurethane (PUR) adhesives can be classified as either thermoplastic or thermosetting depending on how they are formulated. Most polyurethane polymers are formed through the reaction of a di-isocyanate and a glycol. PUR adhesives can be produced in many forms including one-component, two-component, dispersion and solvent-based, depending on your application requirements. PUR adhesives have good adhesion to wood, metal and plastics and they are often used in industrial applications which require greater durability.
| | |
 |
Water-based
IFS has a full line of proprietary Polyvinyl Acetate, VAE Copolymer, Acrylic, Polyurethane, Dextrin and Natural Rubber Latex Emulsions. Products range from 35-70% in solids and 300 to 100,000 cps in viscosity. Full product range for all hot, cold and RF Pressing as well as the fastest line speeds. Our products pass Type I (D4) and Type II (D3) on hardwood and softwood assemblies | | |
|
|
|
|
ifm electronic gmbh
|
|
 |
convenient optical distance measurement
convenient optical distance measurement | | |
 |
efector gwr-the microwave sensor
efector gwr-the microwave sensor | | |
 |
m18 photoelectric sensors
m18 photoelectric sensors | | |
 |
Magnetic-inductive inline flow sensor
SM Series MagMeter - In-Line Flow Meter for Accurate Feedback in Critical Flow Applications
ifm introduces the new SM Series Magmeter – a magnetic inductive flow meter – designed to reliably detect the flow rate of conductive media up to six gallons per minute.
• SM Magmeter’s stainless steel, mechanically-robust design is mounted in-line providing a compact, low-profile installation for process control.
• Display includes a 4-digit numeric display with eight integrated LEDs that together indicate the flow rate (gal/min or l/min), total volume (gallons or liters), and temperature (°F or °C) of all conductive media.
• Simple pushbutton programming quickly establishes application parameters.
• The Magmeter can be setup to provide a switching output, analog output and pulsed output.
• High accuracy with a response time of less than 0.15 seconds and a repeatability of ±0.2%.
• Electrical connection is made through an M12 connector.
Typical applications include:
• Flow and temperature monitoring through heat exchangers
• Monitoring cooling water on welding machines
• Batching applications
• Totalize flow of process water
• Pump run dry protection
• Guard welding equipment against loss of cooling water
Operating Principle: Faraday's Law
The principle of operation of the flow meter is based upon Faraday's Law of electromagnetic induction to detect the flow velocity of an electronically conducting fluid through a defined pipe diameter. Faraday’s Law states that the voltage induced across any conductor as it moves at right angles through a magnetic field is proportional to the velocity of that conductor.
| | |
|
|
|
|
|
|
 |
Bananascreens
Bananascreens | | |
 |
Compost preparation
Compost preparation | | |
 |
Destoner
Shredding plants
| | |
 |
eddy current separator.
eddy current separator. | | |
 |
heavy duty screens
heavy duty screens | | |
 |
vibrating feeders
vibrating feeders with electromagnetic drives | | |
|
|
|
|
IDEAL−Werk C. + E. Jungeblodt GmbH + Co. KG
|
|
 |
A well-designed modular system
A well-designed modular system with machine width from 800 mm (32 inches) up to 3000 mm (118 inches) allows for great flexibility, extremely user-friendly systems, easy maintenance, all for a fair price.
Many standard accessories such as trimming equipment, cross wire cropping unit, multiple line and cross wire loader/feeders, lower cross wire feeder (for welding container mesh, pallet racks, special display products), mesh stacking units, stainless steel device, conical welding device (shopping carts). Even DC welding technology is available as a standard option for superior welding quality and cleaner welds.
| | |
 |
Butt Welding Machines-Wire
... for wire - type DS
Many wire products, wire drawing and rolling facilities, cable manufacturers and wire shops have been using IDEAL Butt Welding Machines for more than 50 years. Our customers appreciate the easy operation, top quality capabilities and durability of our Butt Welding Machines.
We offer machines for steel wire 0.10 - 18 mm and for non-ferrous wire 0.30 - 14 mm range.
Many options like annealing device, cutting device, grinders and wheels are available
| | |
 |
Coil Welding Machine
With an IDEAL Coil Welding Machine you can weld steel and non-ferrous metal coils in a most economical way.
The IDEAL Coil Welder makes the continuous operation of manufacturing lines for e.g. tube welding-, profile-, rolling-, plating-, and annealing lines possible.
| | |
|
|
|
|
ICP Industrial Ceramic Products Inc
|
|
 |
Ceramic Filters
In today's market, many metal casters consider the use of ceramic filters necessary for the production of quality castings and ICP is the leader in this industry. Our ceramic filters for metal casting come in a variety of shapes and sizes.
The use of ceramic filters for removing impurities from metals. Because ceramic filters can withstand extremely high temperatures, their use in foundry and investment casting continues to be essential.
ICP does not stop with just good products. It is a committed belief that product and service are equal partners in any successful company and we pride ourselves on both. Our personnel are aware that our future depends on our customers and they have been trained to be both knowledgeable and courteous. We appreciate the trust that current customers place in us and would like to be given a chance to talk with any foundry on the advantages of using our gating components.
| | |
 |
Ceramic gating components
foundry ceramic gating components | | |
 |
Fused Silica
THE CERAMIC FOR THE NEW MILLENIUM
After extensive R & D, ICP is proud to introduce a line of Fused Silica Products. Utilizing the unique properties of fused silica, ICP has developed a hybrid material, which can be used to manufacture refractory shapes using traditional forming processes. This proprietary material can be compression molded or extruded facilitating high production rates reducing delivery cycle times.
Shapes manufactured from Fused Silica have Zero Thermal Expansion! The excellent thermal shock characteristics of this material make it an excellent choice for areas where refractory failure may be due to repeated thermal cycling or exposure to rapid temperature changes. | | |
 |
Investment casting
investment casting | | |
 |
Thermal Processing Ceramics
ICP has modernized their manufacturing facilities and equipment to provide you the best in quality ceramic products.
ICP does not stop with just good products. It is a committed belief that product and service are equal partners in any successful company and we pride ourselves on both. Our personnel are aware that our future depends on our customers and they have been trained to be both knowledgeable and courteous. We appreciate the trust that current customers place in us and would like to be given a chance to talk with any foundry on the advantages of using our gating components. | | |
|
|
|
|
ibW Rührwerkstechnik GmbH
|
|
 |
Clamping devices HR1
Using this robust and easy-to-use structure, the agitator units are screwed at the edge of the receptacle. | | |
 |
IbW RotoRex pilot beam mixers
IbW RotoRex pilot beam mixers are designed for installation in open and closed tanks. They are designed to be used under pressure or in vacuo (0-40 bar). The optimal mounting direction is vertically from the top or slightly skewed outside the tank centre.
RR pilot beam mixers
RRS pilot beam mixers with suction device
RRSK lateral agitators
High speeds and narrow distances between rotor and turbine pipe help prevent back flow loss. A crucial factor is the strong circulation of the entire quantity of fluid - also at critical points | | |
 |
IbW UniRex heavy-duty dispersing machines
IbW UniRex heavy-duty dispersing machines for process engineering. Development of these machines is based on the effects of mechanical high frequency at rotor/stator systems with high peripheral speeds.
URC Rotor-Stator agitator
URL Inliner
URLS Inliner with suction device
High efficiency is ensured because of the excellent dispersing performance, the robust mature construction and the low energy demand. | | |
 |
TurboRexDIN-mixers
IbW TurboRexDIN-mixers cover the full agitator spectrum, ranging from highly fluid to paste-like media. These include high and low-speed agitator systems for pressureless or pressurized and in vaceo usage. Mounting takes place directly at the motor flange on the sub-construction provided by the customer. | | |
|
|
|
|
|
|
 |
IBI CHEMATUR in association with Chematur Engineering AB
IBI CHEMATUR in association with Chematur Engineering AB have built several plants in India for the manufacture of Formaldehyde, Acetic Acid, Acetic Anhydride, Ethyl Acetate, Butyl Acetate, Nitrobenzene, Nitrochloro products, Explosives, Aniline Oil and more recently Toluene DI Isocyanate ( TDI ).
| | |
 |
M/s. Narmada Chematur Petrochemicals Limited (Merged with GNFC)
Year 1997 - 98 Chematur and IBI Group of companies, had set up a plant at Bharuch - Gujarat with capacity of 20,000 TPA Aniline and 10,000 TPA TDI. | | |
 |
M/s. Vam Organic Chemicals Limited (Now Jubiliant Organosys Ltd.).
The plant entails manufacture of Vinyl Acetate monomer feedstock from molas |
| |
