|
|
|
EMG presses
|
|
 |
IMPACTOR PRESSES
Manual Presses 600 Kg / 3T / 6T
Wide range for marking, numbering, riveting, crimping with high performance and precision.
| | |
 |
Manual bench-top toggle press
TOGGLE PRESSES 700 kg / 1500 kg / 2000 kg
On these articulated lever models, the maximal power is obtained attaining the Bottom Dead center of the stroke. | | |
 |
Manual rack and pinion bench press
RACK PRESSES 400 kg / 600 kg
The rack and pinion main feature is providing constant linear power over the whole travel according to the applied load. | | |
 |
MECHANICAL PRESSES
6t / 15t
High performance, they will carry out your most demanding jobs accurately and reliably.
| | |
 |
Pneumatic press
360 kg / 700 kg
Assembly, connections, crimping, bending forms or small cutting, these models are suitable for work requiring faster target speed.
1t / 3t
Versatile, these double acting models are also perfectly suitable for numerous assemblies, connection and crimping jobs and for your small cutting or stamping work. | | |
 |
PNEUMATIC PRESSES
Manual Presses 600 Kg / 3T / 6T
Wide range for marking, numbering, riveting, crimping with high performance and precision.
| | |
|
|
|
|
EOS GmbH, Electro Optical Systems
|
|
 |
e-manufacturing solutions
e-manufacturing solutions for the plastic and rubber industry | | |
 |
EOSINT M 270
Laser-sintering system for the production of tooling inserts, prototype parts and end products directly in metal
EOSINT M 270 builds metal parts using Direct Metal Laser-Sintering (DMLS). The technology fuses metal powder into a solid part by melting it locally using a focussed laser beam. The parts are built up additively layer by layer. Even highly complex geometries are created directly from 3D CAD data, fully automatically, in just a few hours and without any tooling. It is a net-shape process, producing parts with high accuracy and detail resolution, good surface quality and excellent mechanical properties.
A wide variety of materials can be processed by the EOSINT M 270, ranging from light alloys via steels to super-alloys and composites. EOS has developed novel alloys especially for the DMLS process, and has also optimized and qualified standard industrial materials such as stainless steels for this machine. Further materials are continually being developed and qualified.
New Perspectives in Manufacturing with DirectPart
EOSINT M 270 is widely used to produce positive parts directly from CAD data. This application is called DirectPart. The components can be prototypes, series production parts or even spare parts. Whether the requirement is to deliver a functional metal prototype within one day, or to economically manufacture hundreds of individualized implants in bio-compatible alloy each week, EOSINT M 270 offers the solution.
Rapid and High-Performance Tooling with DirectTool
DMLS is well known as a leading technology for toolmaking, an application known as DirectTool. With its high accuracy and surface quality, EOSINT M 270 is an ideal platform for this application. The direct process eliminates tool-path generation and multiple machining processes such as EDM. Tool inserts are built overnight or even in just a few hours. Also the freedom of design can be used to optimize tool performance, for example by integrating conformal cooling channels into the tool. Increasingly, both strategies are combined to create improved performance in shorter time. DirectTool is best known for plastic injection moulding. However, the technology is also used for other tooling types including blow moulding, extrusion, die casting, sheet metal forming etc.
EOSINT M 270 is a state-of-the-art laser-sintering system. Its solid-state fibre laser offers high performance and reliability over a long lifetime. Fine focussing optics enable excellent detail resolution and part quality, while a variable focus diameter allows increased productivity and broad process control. The gas-tight process chamber offers an efficient use of a protective atmosphere. This enables a wide range of materials to be processed
| | |
 |
EOSINT P 390
Plastic laser-sintering systems for the direct manufacture of series products, spare parts, functional prototypes and patterns for investment or vacuum casting | | |
 |
EOSINT P 730 - up to 40 percent increased productivity
Plastic laser-sintering system for the direct manufacture of series, spare parts, functional prototypes and patterns for investment or vacuum casting
The EOSINT P 730 is an advancement of the EOSINT P 700, the world-wide first double-laser system for laser-sintering of plastics. It is one of the largest plastic laser-sintering systems available on the market. The EOSINT P 730 is up to 40 percent more productive compared to the EOSINT P 700 and combines increased productivity with highest part quality. IntelliScan 20, a digital scanner of the latest generation, exposes the respective layers in a so-far unknown speed and stands for highest precision. The system is ideally suited for the economic production of small series and individualised products, especially with complex geometries. At the same time it provides capacity for the fast and flexible creation of prototypes or patterns for investment and vacuum casting. Within a very short time, the machine also produces large and complex plastic products or castings. These often occur in the automotive, medical and aerospace industry.
Production of Plastic Products and Investment Casting Patterns
The EOSINT P 730 processes a wide range of materials. It generates fully functional plastic products and investment casting patterns of any complexity. The components are built layer by layer, directly from CAD data, in a single process. The technology requires no support structures. That saves time and costs. With its build volume of one metre diagonal, even large geometries are realized in just a few hours. Building larger parts horizontally significantly reduces the number of layers to be built. As a consequence the building process shortens. In addition, the quality of the resulting plastic parts or casting patterns is optimized: these can be built in one piece rather than having to be assembled. For example, the EOSINT P 730 manufactures a fuel tank with a size of 607 mm x 330 mm x 491 mm (23.9 x 13 x 19.3 in) faster than any other laser-sintering system. The tank is built in one piece and is ready for use in just 4 days. The parts are ideally suited for extensive functional tests with aggressive substances such as petrol. And for small components, EOSINT P 730 delivers convincing advantages as well: the system produces more than a thousand parts economically in a single laser-sintering process.
Excellent Integration into an Industrial Production
Due to its ergonomic peripheral devices and the high degree of automation, the EOSINT P 730 offers user-friendly handling, the optimum level of productivity as well as excellent integration into an industrial environment. The automatic powder conveying system, the unpacking and sieving station with exchangeable frame docking system as well as the powder recycling form part of the Integrated Process Chain Management (IPCM). Additional productivity is gained by the use of EOSPACE. This software guarantees an optimum utilization of the build envelope and minimizes the build height. As a consequence, turn-around times and costs decrease.
EOSINT P 730 offers its users totally new dimensions in time and space
| | |
 |
EOSINT S 750
Double laser-sintering system for the direct, tool-less production of sand cores and moulds for metal castings
The EOSINT S 750 is the only double laser-sintering system world-wide for the processing of Croning moulding material. Using the DirectCast method, the system builds cores and moulds for sand casting. Directly from CAD data, fully automatically, with a building speed of up to 2,500 cm3/h (0.09 ft3/h.) and without any tooling. Sand parts of any complexity are built layer by layer, with high accuracy, detail resolution and surface quality. The maximum part size adds up to 720 mm x 380 mm x 380 mm (28.4 x 15 x 15 in.). The resulting cores or core packages are realized with significant savings in time and costs compared to conventional technologies. Usually they also consist of less parts which are thus assembled faster and more precisely.
Innovative Production of Castings for a broad Range of Applications
DirectCast with EOSINT S 750 enables the production of castings in batch sizes that would be extremely laborious, economically unviable or even impossible to manufacture with conventional techniques. In this way, high-quality castings are produced for the engine development, for pumps or hydraulic applications. These castings can be used as fast, cost-effective prototypes or as final products in small series. The technology allows foundries to cater for new trends such as spare parts on demand.
Intelligent Combination of proven and new Technologies
Your company is looking for a solution to produce cast parts in small series economically? Combine laser-sintered cores and conventionally produced moulds and fit them together in a single core package. This intelligent combination opens up previously unknown potentials.
Application-optimized Materials
EOSINT S 750 uses different Croning sands which are commonly used in foundries. These sands have been optimized by EOS for the DirectCast application. The system is ideally suited for building highly complex, detailed sand cores and moulds for premium castings in series quality. Laser-sintering of foundry sand achieves excellent results for light-weight constructions using aluminium or magnesium. The technology also opens up new applications for cast iron and steel.
Designed for Industrial Process Chains
EOSINT S 750 is not a technological island, but can be seamlessly integrated into today’s industrial environment. The Integrated Process Chain Management (IPCM) developed by EOS offers a full range of ergonomic and highly automated peripheral devices. IPCM takes care of the moulding material cycle and includes automatic sand recycling as well as a post-curing station. These features further increase the productivity and user-friendliness of the system. At the same time, IPCM ensures a high level of workplace safety.
| | |
 |
FORMIGA P 100 - small, fast, efficient
Plastic laser-sintering system for the direct manufacture of series, spare parts and functional prototypes
The FORMIGA P 100 represents laser-sintering in the compact class. With a build envelope of 200 mm x 250 mm x 330 mm, the FORMIGA P 100 produces plastic products from polyamide or polystyrene within a few hours and directly from CAD data. The machine is ideally suited for the economic production of small series and individualised products with complex geometry – requirements which apply among others to the medical device industry as well as for high-value consumer goods. At the same time, it provides capacity for the quick and flexible production of fully functional prototypes and patterns for plaster, investment and vacuum casting. With turnover times of less than 24 hours the FORMIGA P 100 integrates itself perfectly in a production environment that requires the highest level of flexibility. The system distinguishes itself also by comparatively low investment costs.
Innovation for Use in Production
The machine offers its users several technical innovations. It has been designed to produce vertical walls with maximum surface quality. The extremely fine focus diameter enables wall thicknesses of as little as 0.4 mm to be built. Thus, the system is ideally suited for small, filigree components such as connectors, just to name one example. The revolutionary dosage and recoating system ensures a high product quality and process stability. Through several new features, the machine is extremely user-friendly and requires only a minimum of accessories. As a result, energy consumption is comparatively low leading to reduced operation expenses. The FORMIGA P 100 is the first door passing laser-sintering system. As a result, there are little requirements to the set-up conditions. The installation and adjustment of the system has also been simplified and is now carried out within one working day. Data preparation is carried out easily at the user’s workplace — once again lending itself to de-centralised production.
Automation and Intelligent Functionality
Due to its ergonomic peripheral devices and the high degree of automation, the FORMIGA P 100 offers user-friendly handling, the optimum level of productivity as well as excellent integration into an industrial environment. The unpacking and sieving station and the integrated powder recycling form part of the Integrated Process Chain Management (IPCM). Additional productivity is gained by the use of EOSPACE. This software guarantees an optimum utilization of the build envelope and minimizes the build height. As a consequence, turn-around time and costs decrease.
The FORMIGA P 100 offers the flexible, cost-efficient and highly productive entry into the world of laser-sintering
| | |
|
|
|
|
Epple Maschinen GmbH
|
|
 |
Bench drills
Bench drills | | |
 |
Lathes.
Lathes. | | |
 |
Metal jig saws
Metal jig saws | | |
 |
Pallet trucks.
Pallet trucks. | | |
 |
Woodworking machines
Woodworking machines | | |
|
|
|
|
Epson robots
|
|
 |
Assembly SCARA robot
No automation task is like the other. Due to the comprehensive of robots Epson offers you a complete solution out of one hand. On top the Epson options like fieldbus, conveyor tracking, vision and others help you to solve even difficult and demanding automation tasks. | | |
 |
Cartesian robot
The EPSON EZ-modules are high-performance linear modules, which may be combined in either suitable way. They perform great thanks to a maintanence free AC-motor. High precision bearings in a stable alloy housing take care for stability and precision.
EPSON makes it easy! | | |
 |
Epson robot control software
From now on there is a new Epson robot control software available. The new Epson RC version is not only a new relaes of Epson powerful robot control software, but comes along with a bulk of new and helpful features.
One of the mostimportant improvements is, that the new software supports a french GUI. Beside German and english the new software now supports all major languages in Europe.
Also the connectivity has been improved by an important part. Beside the numerous existing interfaces, Standard I/O, Ethernet I/O, RS232, Centronics and USB, now Fieldbusses are supported %u2013 concrete Profibus and Devicenet.
Also the new Epson ProSix robot series can be equipped now with the powerful Epson vision system. | | |
 |
Robot controller
Robot controller | | |
 |
SCARA robot
The SCARA robots are one of the domains of EPSON factory automation.
There is a comprehensive choice of types available - if with yields 250mm to 850mm, in different mountings like floor, wall or ceiling, if payloads up to 15kg or an outstanding repeatability - EPSON SCARA robots are a guarantee for a perfect solution.
EPSON makes it easy!
| | |
 |
Vertical articulated robot
With the new EPSON ProSix a new product segment has been entered. It consists out of a high value cinematic arbitrated with the well known EPSON RC controller.
Regardless if cartesian, SCARA or 6-Axis robot - EPSON offers one controller for all purposes. This makes it primarily very easy to switch from one cinematic to the other, furtheron the llanguage, Userinterface and behaviour is all the same - EPSON makes it easy.
| | |
|
|
|
|
Erasteel S.A.S.
|
|
 |
A WIDE VARIETY OF GEOMETRIES
Erasteel offers a wide range of geometries and executions for High Speed Steel products, which are available in different finishes :
rolled
drawn
peeled
ground | | |
 |
CONVENTIONAL HIGH SPEED STEEL
High Speed Steels are high-performance special steels combining high toughness and high hardness levels, thanks to susbstantial proportions of elements like tungsten, molybdenum, vanadium and chromium which are able to form carbides. To improve hot hardness, cobalt may also be added.
High Speed Steels also have a high yield limit, high fatigue strength and high fracture strength and are suitable when abrasive/adhesive wear resistance is required.
Thanks to these properties, High Speed Steels are widely used in many applications: cutting tools (drills, endmills, taps, reamers etc.), saws, knives, cold- & hot-work tooling and wear parts. | | |
 |
HIGH SPEED STEEL BY POWDER METALLURGY
Erasteel has produced powder-metallurgy High Speed Steels since 1969. These grades are marketed under the ASP® brand name, of a worldwide fame.
Thanks to the powder-metallurgy process, higher-quality products can be obtained, offering the following advantages :
a higher hardness, due to a higher content of carbide-forming elements
a higher toughness, because the material is free from carbide segregation. In addition, the ESH process removes about 90% of non-metallic inclusions, ensuring better reliability of powder-metallurgy HSS tools | | |
 |
high speed steels
high speed steels | | |
|
|
|
|
Erema Engineering Recycling Maschinen und Anlagen GmbH
|
|
 |
Automatic Edge Trim Recycling System KAG
KAG - the innovative EREMA solution …
… for fully automatic edge trim recycling.
Fully automatic control available*
Self-adjusting operating range when reprocessing edge trim – no manual adjustments necessary*
Low-key service and maintenance
Minimal thermal damage to the reprocessed material
Extremely low specific energy consumption
Low noise emission (low sound level)
* for KAG 806 only within limits | | |
 |
EREMA Double Disc Technology DD
Many Erema-type plastic recycling applications suffer under problematic feeding influences such as high residual moisture and large density variations in the feed material, as well as too large feeding portions, which typically have a negative influence on the subsequent extrusion process. The extruder has to deal with these “adverses” and shows this in common with reduced or varying output performance, possibly inconsistent melting performance (moisture!), reduced product quality and increased wear, besides reduced overall productivity.
| | |
 |
EREMA Filter Systems for Thermoplastics
As the worldwide leader in manufacturing of plastics recycling equipment Erema has a wealth of experience in filtering polymer melts.
Over the years polymer filtration has become one of Erema's key areas of expertise, due to its quality-defining aspects. There are currently more than 2000 Erema polymer filters being used all over the world for numerous different applications to the satisfaction of Erema's customers.
As your reliable partner for filtration solutions we offer a wide production program of advanced filter systems, comprehensive advice, prompt service and worldwide support. The Technical Centre at our headquarters in Linz/Austria gives you the opportunity to conduct filtration tests under realistic production conditions.
Different melt filter systems for almost any specific requirement
Criteria such as throughput capacity range and type of application, besides individual process requirements, are critical factors in choosing the most cost-efficient melt filter solution. Our wide range of filters and the various sizes available mean that you will nearly always find a custom Erema filter system to meet your specific needs.
Erema melt filters meet the very highest quality standards and are characterised by their heavy-duty construction, high degree of automation and high-performance availability.
Our products range from simple, manual lever-operated pivot disc safety filters to one-, two- or four-piston partial area backflush screen changers as well as the high end laser filter for heavily-contaminated polymers.
| | |
 |
Laser Filter: The Filter with the extreme separating capacity
The name ”Laser Filter“ originates from the fact that the core elements of this filtering system, the filter screens, are drilled (shot through) using laser technology, with the holes designed conically, making them self-cleaning.
(see picture below)
Used plastic waste contains a large proportion of unwanted material and contamination. Despite complex washing and separating processes, the removal of residual contamination through the melt filtration system in the subsequent extrusion process causes huge problems, particularly in terms of economic efficiency.
Conventional melt filtering technology on the market fails to meet the demands in many cases. This is all the more so if the used plastic waste is to be used to manufacture pellets (recyclate) in film quality.
In order to perform these tasks, Erema has developed a continuous high-capacity filtering system: the EREMA LASER FILTER.
A quantuum leap in filtering capacity
When traditional cartridge filters with wire mesh screens are used, heavy contamination of the screens rapidly results in excess pressure, switching off the extruder in seconds. Using the Laser filter, a continuous filtration and thus extrusion process can be maintained for days and even weeks.
Comparisons made in the Erema’s technical centre and in many customer applications confirm the impressive capacity of the new filtering system, e.g. in filtering plastic melt from washed post-consumer plastic waste.
The results:
3 –5 minutes screen change interval
using traditional cartridge screen changers
high personnel costs
high risk of injury
limited filtering capacity
2 hours screen change interval
with modern state-of-the-art partial area backflush
screen changers (e.g. Erema SW 8/170 RTF)
reduced personnel costs
reduced risk of injury
increased filtering capacity
600 –1000 hours screen change interval
with the EREMA LASER FILTER!
extremely high filtering capacity
practically no need for personnel
minimum melt loss
fully automatic constant pressure operation
| | |
 |
The Erema VACUREMA technology for PET processing and PET recycling
This unique, well proven and extremely flexible technology can process PET materials and any blends of materials coming along
in the form of virgin pellets, post consumer bottle flakes, preground preform flake, preground cut out frames from thermoforming, precut fibre waste, and others,
without external upstream crystallisation and without upstream predrying,
in various bulk densities,
into melt filtrated, virgin-like pellets or directly into end products such as sheet, fibre or strapping.
Different plant concepts can be configured depending on customers' individual requirements regarding required IV and required degree of decontamination.
| | |
 |
TVE Extruder
Recycling technology for plastic/rubber industries | | |
|
|
|
|
Erhardt + Leimer GmbH
|
|
 |
Arcnet interface DI 2000
CAN-Arcnet interface for data transfer from 8 CAN groups | | |
 |
Edge trimmer 01
Edge trimmer with two driven blade shafts to trim the edges of running webs of textiles, carpet, paper, cardboard, film and foil. | | |
 |
Web cuttter BT 05
Web cutter with two driven blade shafts to cut running webs of textiles, carpets, paper, cardboard, film and foil.
Cutting speed is either dedicated or variable | | |
|
|
|
|
Eriez Magnetics
|
|
 |
Eddy current separator
Ideal for material recovery facilities wishing to automate removal of aluminum beverage cans from commingled recyclables. Available in feed widths of 24, 36 and 48 inches (610, 914 and 1220 mm). | | |
 |
Magnetic drum separator
Permanent magnetic separators used for the automatic separation of ferrous metals and stainless steel
Ferrite models remove tramp and fine iron from dry bulk materials and Rare Earth models with 25 times the field strength of conventional ferrite magnets are able to separate very fine irons from both dry bulk materials/powders and slurries.
Key features: versatile, low maintenance, self-cleaning, choice of drum widths, custom-design
| | |
 |
Non-ferrous metal separator
High sensitivity metal separators for installation in free-fall (gravity-fed) systems
E-Z Tec 9100 Metal Separators can detect all types of metal, including stainless steel, in a variety of industries, including plastics, wood, textiles and recycling. High speed diverter ensures minimum loss of clean product.
| | |
 |
Suspended magnetic separator
Suspended Permanent Magnets are employed to protect machinery, such as crushers, from damaging effects of ferrous metal contamination
They are positioned in a chute or more commonly over a moving conveyor belt specifically either over head pulley or across the belt and are used in the recycling, minerals extraction/quarrying industries as well as for other bulk materials applications, such as grain handling. | | |
 |
Tunnel metal detector
Tunnel metal detector | | |
 |
Vibratory feeder
Eriez offers a complete line of vibratory equipment to convey, screen and feed materials in quantities ranging from a few spoonfuls to tons per hour. If the many standard systems available are not quite right for your operation, Eriez' Technical Center can develop custom-designed vibratory and screening equipment to precisely meet your needs. | | |
|
|
|
|
ERLENBACH GmbH
|
|
 |
EHV-C moulding machine
The Erlenbach EHV-C moulding machine has become the yardstick in the EPS processing field through continuous further development and optimisation. You will be able to cover all the market's requirements and demands in the EPS and EPE fields when you use the EHV-C machine.
Performance characteristics of the EHV-C moulding machine:
Highest corrosion resistance through robust hot dip galvanised steel construction with high quality surface lacquering
Energy-saving, internally-insulated steam chamber system of aluminium
Optimally-dimensioned media piping and all-electronic control system
Modern SPS control with touch panel
Operator-oriented display surface with process-oriented menu configuration - integrated malfunction administration - integrated maintenance schedule - teleservice-compatible (EM Service)
Highest moulded part quality using the Erlenbach low pressure technique when using conventional moulding engineering.
Improved logistics through separating material flows on the machine
System efficiency of the moulds
Economical manufacturing of smaller lots, reduction of the inventory stock
Higher availability of the processing machines using the quick mould changing system
Optimum utilisation of the production area; the machines can be placed next to each other to save space, as the mould change is carried out from the rear
Logistically clearly structured operation sequences by applying an integrated manufacturing system
Realisation of special applications on standard machines such as:
foil lamination
skin moulding
double filling
realisation of two different volume weights | | |
 |
ERLENBACH ENGINEERING.DE-DUSTING UNIT
The feeding of the Erlenbach de-dusting system is carried out continually using the mill blower. Specially designed turbulence strips create a tangential turbulence as well as transporting the grains axially against a screen mesh. The dust particles are blown through the screen mesh into the downstream hose filter unit using air from the blower and are filled in special dust sacks. The coarse grains are directed through a separate outlet to a conveyor blower from where the material is then carried to the next processing unit.
Advantages:
Residual dust in the mill grain lies below 1%
Maintenance-friendly and self-cleaning
Small installation area / little space required
A downstream filter unit is individually dimensioned for the respective operating conditions whereby maintenance of the limit values for the residual dust concentration of discharged air is guaranteed. | | |
 |
ERLENBACH ENGINEERING.EPS & EPP MATERIAL SILOS
Erlenbach silos for storage and stabilising pre-expanded EPS and EPP as well as for recycled material - safe in construction and function. Special solutions upon request.
Types of silos:
Silo size < 20 m3 for a max. density of approx. 70 kg/m3
Silo size = 20 m3 for a max. density of approx. 50 kg/m3
Silo size > 50 m3 for a max. density of approx. 35 kg/m3
Silo base frame:
Corrosion protected
Silo reinforcement:
With woven steel thread
Uncoated
Breathable
Antistatic
Silo cover:
Antistatic
Dust-repellent on the inside
Ground clearance:
800 mm (other dimensions on request)
Accessories:
Pipelines
Pneumatic changeover switch
Level sensor
Silo control
| | |
 |
Three different versions of the Erlenbach EHV moulding machine are available:
Three different versions of the Erlenbach EHV moulding machine are available:
EHV + EHV-E for processing EPS
EHV-LF for processing / manufacturing lost-foam-components
EHV-PP for processing EPP
The machines of these types are especially suitable for manufacturing medium to large lot sizes. Performance characteristics of the EHV moulding machines:
Highest corrosion resistance through the robust steel construction with high quality surface lacquering
Optimally dimensioned media piping and all-electronic control systems
Operator-orientated display surface with process-oriented menu configuration
- integrated error message administration
- integrated maintenance schedule
- teleservice-compatible (EM Service)
Machine stroke 1,000 mm (max. 400 mm moulding depth)
- optional stroke variants 1,500 mm (max. 650 mm moulding depth)
- optional stroke variants 2,000 mm (max. 900 mm moulding depth)
Filling system of 30 to 600 l with electronic pressure regulation
Realisation of special applications on standard machines such as:
foil lamination
skin moulding
double filling
realisation of two different volume weights
Economical utility of the type series EHV:
production cost advantages through the use of economical and flexible handling systems. | | |
|
|
|
|
CONSTRUCCIONES MECÁNICAS ERLO, S.A.
|
|
 |
Bench drilling machine
Bench drilling machine | | |
 |
Bench type tapping machine
Bench type tapping machine | | |
 |
Drill press
Drill press | | |
 |
Milling-drilling machine on base.
Milling-drilling machine on base. | | |
|
|
|
|
Ernst Maschinenfabrik GmbH
|
|
 |
Brushing Machines
The BM series of brushing machines called BM2 - BM4 is incorporating 2 to 4 brush heads at a diameter of 400 mm.
As BM 2/1 this machine has been deliverd over 50 times to companies that produce 3-D membrane pressed doors.
As rustical / texturing brushing machine it is installed at many well knows solid Wood floor manufacturers all over the world for removing the soft Wood zones.
| | |
 |
Deburring machines:
The company Paul Ernst is technology leader in the market of deburring equipment.
Machines are available as well for deburring of punched and laser cut parts, as well as deburring/deslagging machines for flame- and plasma cut parts.
With a complete range of machines in a building set design these machines are build 100% to the customers application.
| | |
 |
Dry deburring machines
Dry working deburring machines are characterized by very little amount of maintanance.
They are extremely robust and should be choosen, if no material mix has to be processed, as e.g. in steel service application.
| | |
 |
Models 830 / 840
For the door, furniture and Wooden floor industry using lacquering lines, at feed speed over 20 to 24 m/min ERNST suggest the usage of 3 head sanders with one cross and two wide belts.
These heavy Industry machines are running in many well knows companies throughout Europe and North America.
For very high feed speeds ERNST is offering 4 head sanders with up to 5 pressure beams achieving feed speeds of up to 50 m/min.
| | |
 |
The model 810 is a sanding machine with one wide belt sanding unit and two brush heads
This model typically is used for laquer sanding in laquering lines with feed speed of up to 25 m/min.
It also is used for a fine veneer sanding of pre sanded parts, directly in front of laquering lines.
The type 810 is available in Simlex and Duplex execution, which incorporates 2 pressure beams in one wide belt.
For feed speeds over 25 m/min the TYPE 850 is recommended, incorporation 2 wide belt units and 2 brush heads.
| | |
|
|
|
|
Enviroburners Oy
|
|
 |
Dedicated NCG incinerator
Among various industries Pulp and Paper Industry is one of Enviroburners’ most important customer groups.
Enviroburners is supplying non-condensable gas (NCG) burners and back-up flares for pulp mills' NCG systems including flame arresters, valve trains for oil, natural gas and liquid methanol and turpentine.
Burner management system is an important part of our scope.
Our experienced personnel is available to provide start-up and commissioning as well as operator training services.
Enviroburners’ customer support service covers burner maintenance, trouble shooting and spare part deliveries
| | |
 |
HYDROGEN-GAS-FUELED-BOILER
HYDROGEN-GAS-FUELED-BOILER | | |
 |
industrial burner
general industrial burner | | |
 |
Natural gas and oil fired burner
Natural gas and oil fired burner for drying rotary kiln in Chile | | |
 |
PARTICLE-BOARD-MILL250 burner
PARTICLE-BOARD-MILL250 burner | | |
 |
Typical NCG burner
With the help of our burners and flares your pulp mill odor problems can be reduced down to a minimum by:
Converting non-condensable gas and methanol to useful energy
Oxidizing odor causing compounds up to 99%
Burning low volume high concentration (LVHC) and high volume low concentration (HVLC) NCG, liquid methanol and turpentine in the same burner or flare
Additionally flare type incinerator is frequently used as a stand-by backup with rapid start-up.
Enviroburners’ NCG burner models are custom designed for dedicated incinerator, power boiler and recovery boiler applications.
There are no refractory linings needed in our burners and flares.
All materials are stainless steel.
| | |
|
|
|
|
Entsorungstechnik Bavaria GmbH
|
|
 |
sorting plants
waste sorting plants | | |
|
|
|
|
Endoline Machinery Ltd
|
|
 |
Case Erecting Machinery
Endoline 200 Series
Endoline is a pioneer in designing case erectors for challenging environments and was the first to introduce many unique features.
Case Erectors are designed to automatically erect cases from a flat "blank" to an open case with tape or glue applied to the bottom flaps.
Dual Opposed Vacuum Case Opening for reliable opening of each case.
Cases produced are perfectly square and ready for case packing.
Designed to offer 24-hour production with little operator interface.
Replaces manual case erecting and helps eliminate the risk of RSI.
Compact footprint for ease of installation.
Clear access for quick set-up and cleaning.
Quick size change is suitable for short production runs
| | |
 |
Case Forming - Phoenix
P1-SF-H / P2-SF-H / P3-SF-H
Each machine is suitable for a range of case sizes; P1 allows for a small range, P2 medium range and P3 a large range. Each machine can be used either on its own or close-coupled to a case sealer to provide a simple and effective system for case forming, loading and sealing. The H denotes that these machines are fixed in the horizontal position, which is ideal for most applications | | |
 |
PACKING STATIONS (tapers with infeed tables)
Infeed tables
Increased productivity
The benefits of case taping machines are well known, but less well known is the fact that to achieve maximum productivity from your case taper you should mount an infeed table directly to it. This reduces unnecessary operator movements and improves packing efficiency. Many of Endoline’s semi-automatic case tapers are supplied as standard with horizontal infeed tables for this reason, as without them the case taper can deliver only part of it‘s savings.
Improved ergonomics
A correctly specified, designed and fitted infeed table can allow an operator to erect, pack, seal and palletise cases in an ergonomic way without moving from his or her station which is as productive as any packing operator can be
| | |
 |
Pick and Place Machinery
Endoline 310 Series - Linear Axis
The Endoline 300 Series of pick and place machines is designed to fully automate the packing of products into cases, trays or crates on new or existing production lines, which will remove labour intensive operations, which are a major cause of cost and repetitive strain injuries.
It includes many features aimed specifically at customers seeking efficiency through simplicity in terms of set-up, operation and maintenance, which makes the 300 Series a particularly cost-effective investment.
The modular nature of the range means that each installation is ideally suited to its application by drawing from a wide range of variants; each of which is designed to cover a wide range of applications.
This approach means that customers can benefit from a system that meets their own specific needs but without the high costs often associated with more complex and less versatile traditional machines.
Every aspect of the 300 Series has been developed to make it particularly simple to use and efficient in operation to reduce running costs and ensure the maximum return on investment.
The 300 Series is designed to compliment new or existing packaging machines such as case or tray erectors and sealers and crate handling equipment to give a fully flexible layout that is ideally suited to the demands of the installation.
This means that the efficiency of the system is greater because each machine performs only one specific function and can be positioned to achieve an ideal flow of products, packaging and people.
| | |
 |
Pre-Set Semi-Automatic Case Tapers
Simple adjustments for quick size change.
Floating bridge improves belt life and reduces setting time.
Secure, accurate and consistent taping reduces material costs and damage through poor sealing.
Instantly removable interchangeable tape heads reduces tape re-loading time.
Twin columns ensure accurate taping.
| | |
 |
Versapack Case Loaders
At up to 100 picks per minute and 20 cases per minute the Versapack has been developed based on the well-established success of Endoline’s 220 Series of case erectors and Quin System’s Rtheta™ high speed picking head | | |
|
|
|
|
Endress + Hauser Metso AG
|
|
 |
flowmeter
eletromagnetic flowmeter. | | |
 |
Levelflex M FMP40
Smart Transmitter for
- Level Measurement in Bulk Solids and Liquids
- Interface Measurement in Liquids
Your benefits
Probes are available with threaded process connections
from ¾" and flanges from DN40 / 1½.
Rope probes, above all for measurement in bulk solids, measuring range up to 35 m.
Rod probes, above all for liquids
Coax probes, for liquids
Simple, menu-guided onsite operation with four-line plain text display.
Onsite envelope curve on the display for easy diagnosis.
Easy remote operation, diagnosis and measuring point documentation with the free operating program supplied.
Optional remote display and operation.
With coax probes the measurement is independent of internals in the tank and of the installation in the nozzle.
Probe rod and probe rope can be replaced/shortened.
Approvals: ATEX, FM, CSA, TIIS, NEPSI, IECEx.
Level measurement
Continuous level measurement of powdery to granular
bulk solids e.g. plastic granulate and liquids.
Measurement independent of density or bulk weight, conductivity, dielectric constant, temperature and dust e.g. during pneumatic filling.
Measurement is also possible in the event of foam or if the surface is very turbulent.
The HART with 4 to 20 mA analog, PROFIBUS PA and
FOUNDATION Fieldbus protocols are available for
system integration.
Application in safety related systems (overspill protection) with requirements for functional safety up to SIL 2 in accordance with IEC 61508/IEC 61511-1.
WHG approval
Interface measurement
Continuous measurement of interfaces between two liquids with very different dielectric constants, such as in the case of oil and water for example.
Measurement independent of density, conductivity and temperature
Electronics version for the simultaneous measurement of the level of interfaces and the total level in liquids. The HART with 4 to 20 mA analog protocol is available for system integration.
Special version for the measurement of the level of interfaces at a constant total level. The PROFIBUS PA and FOUNDATION Fieldbus protocols are available for system integration.
| | |
 |
Liquicap T
Capacitive level measurement
Two-rod probe for continuous measurement in liquids
Your benefits
Safe function regardless of tank geometry thanks to probe design
No calibration necessary (preconfigured from factory 0 %...100 % to probe length ordered)
High quality, non-corrosive materials (carbon fibre, stainless steel) for use in aggressive liquids and liquids which present a hazard to water (WHG-approved (German Water Resources Law))
No moving parts in tank - long operating life - dependable function without wear
Cost-effective solution for continuous measurement of levels in conductive liquids
Optimised storage by simply shortening the probe rods on site (probe shortening set)
Field of application
The Liquicap T sensor is used in conductive liquids (as of 30 μS/cm) for continuous level measurement and is preconfigured from factory 0 %...100 % to probe length ordered.
As of a conductivity of 30 μS/cm, the measurement is independent of the dc-value (dielectric constant) of the liquid. It can also be deployed in Ex area, Zone 2.
The Liquicap T is particularly suited to the following applications:
Small measuring ranges (as of 150 mm)
Cistern measurements
Aggressive liquids (many acids and alkalis)
Independent of the tank material (plastic, stainless steel or concrete) or the tank shape
Used in conjunction with the Fieldgate FXA320 (remote measured value interrogation using Internet technology),
Liquicap T is an ideal solution for inventorying material and optimising logistics (inventory control).
| | |
 |
Prosonic T
Compact transmitters for non-contact level measurement of fluids and coarse bulk materials
Your benefits
Non-contact measurement method, therefore almost independent of product properties
Integrated temperature sensor for time-of-flight correction. Accurate measurements, even for temperature changes
Linearisation function for measured value output in any units
with optional display
simple mounting via NPT 1½" thread
Two-wire instrument; level indicated by 4-20 mA output current
Field of application
The compact transmitters Prosonic T are used for continuous, non-contact level measurement in fluids and coarse bulk and lumpy materials (grain size from 4 mm onwards).
Maximum measuring range:
4 m in fluid
2 m in bulk materials
For larger measuring range see FMU231A:
7 m in fluids
3,5 m in bulk materials
| | |
 |
Prowiel monitors
Prowiel monitors the flow volumes of the fully desalinated water | | |
 |
Silopilot T
Electromechanical Level System
Your benefits
Measurement of levels up to 32 m, regardless of bulk solid properties
Accuracy ±2.5 cm or ±1 pulse, thus measured level recorded precisely
Process temperatures up to 150°C possible
Compact transmitter with 0/4 - 20 mA current output and additional freely programmable signal outputs (e.g. counting pulses)
Easy menu-guided local operation via four-line plain text display
Fully electronic digital minimum fail-safe mode, thus no movement into silo outlet, conveyor elements not affected
Supply voltage 90 - 253 VAC (wide-range voltage power unit) as well as 24 VDC, depending on version selected
Optional version with "dust ignition-proof" certificate for use in dust incendive hazard areas, Zones 20, 21 and 22 (measuring environment) or Zones 21 and 22 (instrument environment), Category 1/2D.
Field of application
The Silopilot T FMM20 is an electromechanical level system for light bulk solids such as wheat, plastic granules and powder. Depending on the sensing weight, the level can be measured in bunkers or silos with dusty, fine-grain or coarse-grain bulk solids.
| | |
|
|
|
|
Energetic Cleaning Technologies BV
|
|
 |
on-line-boiler cleaning.
on-line-boiler cleaning. | | |
|
|
|
|
Engel Vertriebsgesellschaft mbH
|
|
 |
Automated handling
Automated handling. Transforming an injection moulding machine into a production cell | | |
 |
automation tools
The flexible equipment programme for the automation in injection moulding
End of Arms – the customized solution to fulfill your requirements
- construction and installation of end of arm tooling
- at minimum-cost and adjusted to your special requirements
- extensive know-how from decades of experience
| | |
 |
Electric Injection
Electric Injection – the efficient way to manufacture precision components | | |
 |
Engineered for the future
Precise, compact and economical
We had a vision. A machine – compact like no other, equipped with state-of-the-art technology and with every single detail optimised for maximum performance, to guarantee our customers a machine that is as economical as it is precise. This was how the e-max came to be:
maximum precision – 100% ENGEL maximum quality – made to stringent standards compact to the max – optimal performance on a small footprint | | |
 |
Powerful machines
Powerful machines for big parts | | |
 |
Premium performance for maximum output
With its the speed series, ENGEL continues its tradition of toggle clamp technology in line with state-of-the-art developments. Systematic re-engineering in conjunction with an efficient hydraulic drive system are the essential basis of this series of high-performance injection moulding machines.
Because:
Toggle style clamping mechanism: Fast – smooth – robust "Wide platen“ option for optimized clamping force even for high cavitation moulds Short overall cycle times thanks to fast dry cycle times of 1.2 to 1.7 seconds, fast injection speed (up to 1000 mm / s) and parallel motion Machine system geared for high-performance and durability: Stable base frame / modular system components / tried-and-trusted high-performance hydraulics / maintenance-free ultrasonic sensors Complete system range with four sizes | | |
 |
The key to injection quality
The key to injection quality. The ENGEL e-motion injection unit | | |
 |
Tie-bar-less machines
Tie-bar-less machines for universal applications | | |
|
|
|
|
Engelfried Maschinentechnik
|
|
 |
4 side moulder
4 side moulder | | |
 |
Briquetting press
Briquetting press | | |
 |
Drying kiln
Drying kiln | | |
 |
Edge banding machine
Edge banding machine | | |
|
|
|
|
Engineering Firm Cymontkowski
|
|
 |
Monti Vision Image Analyser
Acquire, Calibrate, Inspect and Archive Images!
Acquisition from Framegrabber,
FireWire or USB Camera
Calibrate optical/display metrics
Inspect and measure lengths, diameters, areas and angles, etc.
Export results into Excel table
User rights management
Acquisition from video files
Field of application
Industry (E.G. Quality control)
Microscopy (E.G. Medicine, Biology
| | |
 |
MontiVision Development Kit
Supports Framegrabbers, FireWire,
GigEVision-, USB and Network Cameras
Comprehensive Imaging Library,
DirectX (DirectShow Filter) Support
Easily integrated into your Application
No Runtime Fees (Royalty Free)
Components
MontiVision Workbench
Intuitive, contemporary IDE
Imaging Modules (DirectShow Filters)
Fully interactive property pages
MontiVision Filter SDK
Fast Implementation of New Algorithms
MontiVision Smart ActiveX Control
Rapid Integration into Existing Applications
Sample Applications
C/C++, C#, VB6, VB .NET, VBA, Delphi | | |
 |
Steribar 2D Vision Software
Barcode Decoding and Quality Analysis
Acquisition from Framegrabber,
FireWire or USB Camera
Decode Window, Activity Log
Export to RS232, TCP/IP Port, Network Drive,SQL, Access, Excel, Word | | |
|
|
|
|
Enidine GmbH
|
|
 |
Air Mounts
Enidine Incorporated offers an excellent vibration isolator with high lateral stability for those applications where vibration isolation is required for machinery or equipment with high centers-of-gravity. The Enidine Air Mount provides the solution for these types of applications, extending your industrial machinery’s life.
Literature Downloads
Find Your Local Distributor...
With its heavy-walled construction and air-cushioned isolation, the Enidine Air Mount system will provide resiliency and prevent static deflection and permanent set/drift with your machinery. It also has neoprene padded top and bottom surfaces for soft interface with all connecting and supporting surfaces.
Typical applications for the Enidine Air Mount are as follows: air compressors, CMM machinery, most rotating industrial equipment, tools, fans, laundry and general machinery.
Typical Applications:
Air compressors
CMM machinery
Forging hammers
Industrial equipment, tools and machinery
Specifications
--------------------------------------------------------------------------------
Air Mounts
Air-cushioned isolation
Low natural frequency (3 ~ 5 Hz at operating load)
High deflection
Neoprene padded top and bottom bases
Heavy wall construction
High lateral stability
Low maintenance
Extends machinery life
Combined resiliency and air prevents high static deflection, drift or permanent set
Wide load range available
| | |
 |
Airsprings
Airsprings | | |
 |
Compact Wire Rope Isolators
For the best in vibration isolation capabilities, Enidine Incorporated's Compact Wire Rope Isolators are a proven solution. Smaller than traditional wire ropes, these unique isolators provide simultaneous shock and vibration attenuation where sway and package space are a premium.
Literature Downloads
Find Your Local Distributor...
They are ideal for lightweight applications such as:
Disk drives
Medical equipment
Sensitive mobile electronics
Electronic cabinets
Small pumps & motors
Shipment of sensitive items
The all-metal design of Enidine Incorporated's Compact Wire Rope Isolator (WRI) provides unsurpassed multi-axis shock and vibration isolation and maximum reliability. Ideally suited for hostile environments, Compact WRI require virtually no maintenance and are unaffected by chemicals, oils, ozone, and abrasives. By implementing the Compact WRI products, the effects of the shock and vibration incurred by machinery can be reduced significantly and prevent or eliminate premature equipment failure and costly downtime.
If your application falls outside the standard Compact WRI product range, please consult the standard Wire Rope Isolator product line. Enidine Incorporated's WRI products are ideally suited for a broad range of applications. If a standard solution is not available, Enidine Incorporated can custom design an isolator to suit your specifications.
Specifications
--------------------------------------------------------------------------------
Compact Wire Rope Isolators
Easy 2-point installation.
Cost effective and durable multiaxis shock and vibration isolation.
Ideal for sensitive equipment and electronics.
Small size permits isolation of individual system components.
Suitable for temperature ranges of -150º to 500ºF (-100º to 260ºC).
All-metal design is suitable for hostile environments.
Static load capacities
| | |
 |
HD Series Shock Absorbers
These heavy duty hydraulic shock absorbers protect equipment from large impacts in applications such as automated storage and retrieval systems as well as overhead bridge and trolley cranes. They are available in a wide variety of stroke lengths and damping characteristics to increase equipment life and meet stringent deceleration requirements.
Literature Downloads
Find Your Local Distributor...
Utilizing a special compact design, these shock absorbers smoothly and safely decelerate large energy capacity loads up to 8 million in-lb per cycle. These models incorporate an internal, air charged bladder accumulator, replacing mechanical return springs, providing a shorter overall length and reduced weight. The zinc plated, external components provide enhanced corrosion protection, while epoxy painting and special rod materials are available for use in highly corrosive environments. All of Enidine Incorporated's heavy duty hydraulic shock absorbers are engineered to meet OSHA, AISE, CMMA and other safety specifications such as DIN and FEM.
Enidine Incorporated's heavy duty hydraulic shock absorbers are offered with a wide variety of optional configurations including bellows, clevis mounts and safety cables. Standard adjustable or custom-orificed non-adjustable models are also available as well as optional fluids and seal packages to expand standard operating temperature range from (15º F to 140º F) to (-40º F to 210º F). For easy maintenance, all sizes of Enidine Incorporated's heavy duty hydraulic shock absorbers are fully field repairable. These products also offer piston rod extension sensor systems for reuse safety requirements.
Specifications
--------------------------------------------------------------------------------
HD Series Shock Absorbers
Compact design smoothly and safely decelerates large energy capacity loads up to 8 million in-lbs. per cycle.
Engineered to meet OSHA, AISE, CMMA and other safety specifications such as DIN and FEM.
Internal air charged bladder accumulator replaces mechanical return springs, providing shorter
overall length and reduced weight.
Wide variety of optional configurations including bellows, clevis mounts and safety cables.
Available in standard adjustable or custom-orificed non-adjustable models.
Zinc plated external components provide enhanced corrosion protection.
Epoxy painting and special rod materials are available for use in highly corrosive environments.
Incorporating optional fluids and seal packages can expand standard operating temperature range
from (15° to 140°F) to (-30° to 210°F).
All sizes are fully field repairable.
Piston rod extension sensor systems available for reuse safety requirements.
| | |
 |
Industrial shock absorbers
Industrial shock absorbers | | |
 |
Wire rope insulators
Wire rope insulators | | |
|
|
|
|
Enomoto Machine Co., Ltd.
|
|
 |
BF Super High-Speed Friction Screw Press
Super High-speed Friction Screw Press of the series BF are the new type ones, based on our long term experience in this field.
In many aspects, this new type has high performance to compare with former friction press or hammer and mechanical forging press. | | |
 |
Screwpress
Screwpress | | |
 |
Vincent type Friction Screw
The design of Vincent type Friction Screw Press is based on our long term experience in this field. This machine has different mechanism from other type of friction screw presses, which the ram goes up and press the material. This machine is especially favorable for heading of the long material such as long hexagon headed bolt. | | |
 |
ySMALL TYPE SERIESz
Super High-speed Friction Screw Press of the small series BF are the new type ones, based on our long term experience in this field.
In all aspects, this new type has high performance to compare with the former hydraulic control model. | | |
|
|
|
|
Ensinger GmbH
|
|
 |
Always a step ahead of our time
Our aims for the future are also dictated to a very great extent by the development in our customers' needs. The trend is to accelerate product development and cut costs by modular development with competent suppliers. We design, develop and produce parts and components for specific applications which are then assembled, tested and packed in our works.
Efficient synchronisation with the logistics systems of our customers is also necessary today for survival as a systems supplier. Whether individual stocking, call off deliveries or just in time: We make everything possible.
We would be pleased if the information about our company on the Internet helps you in solving your problems. Perhaps you would like to know more about one or other of our products, or just want to give us a few new ideas. Talk to us. We will be pleased to answer you.
| | |
 |
At the end of the day, it's quality that counts
The highest quality of the semi-finished and finished products combined with a worldwide distribution network form the basis for our customer satisfaction. In order to guarantee this quality, the whole production process is subject to the most stringent QA controls, from the receipt of the raw materials through to the release for delivery of the finished product. For us compliance with ISO 9001 goes without saying | | |
 |
Ensinger‘s expertise and customer service
Our attention is focused on the specific demands of our customers. For this reason, our consultant engineers have not only thorough applications know-how but also knowledge of a wide variety of industrial sectors. You and they together draw up customised, convincing solutions as partners in a dialogue.
| | |
 |
plastic parts + compounds
plastic parts + compounds | | |
|
|
|
|
Entex Rust & Mitschke
|
|
 |
Calender processing lines
TP-WE 250 M2 RG for calender compounding with pelletizing and degassing | | |
 |
dosing units
dosing units | | |
 |
Pelletizing systems
Radial pelletizing with slot liner | | |
 |
Smoothing rolls-Calandrettes
Flat web unit with twin extruder | | |
 |
Stuffing devices
Twin stuffing devices
| | |
 |
Thermo-calender rollers
Calender roller | | |
|
|
|
|
ERO-Führungen GmbH
|
|
 |
cross roller guides
cross roller guides | | |
 |
Machine column rough enamelled RAL-6011
Machine column rough enamelled RAL-6011 | | |
|
|
|
|
EROWA AG
|
|
 |
EDMing
Shapes in the surface of the punches are EDMed. The reference position is provided by the chuck.
| | |
 |
EROWA PM Tooling - the rapid-action loading/unloading system for powder pressing
EROWA's PM rapid-change tooling system reduces resetting
times for punches and die plates on powder presses to less
than 2 minutes.
You increase quality while saving time and cutting costs.
Reversible carbide tips are becoming ever more refined. Punches and die plates on powder presses are often reset. In order to reduce resetting times, a rapid-change tooling system must be used.
The EROWA PM Tooling is the interface between punch, die plate and the press adapter. The system has been developed for use under high pressure. Both the die plates and the upper and lower punches are machined on the EROWA PM Tooling, from their manufacture to their use on the press.
Owing to the positioning accuracy and stability of EROWA's PM Tooling, all the punches and die plates manufactured on the system can be changed in next to no time. | | |
 |
EROWA PM Tooling - universality from milling to pressing
Punches and die plates are manufactured on pallets, with exact centricity. The EROWA PM Tooling is compatible with all EROWA's "P" chucks. The EROWA PM Tooling enables your machines to be fully automated.
Milling
Electrodes to EDM the forms are machined on ITS system holders. The reference position is provided by the chuck.
| | |
 |
Grinding
The machines used to produce punches include circular grinders. The reference position is provided by the chuck. | | |
 |
Powder pressing
The upper and lower punches and the die plate are inserted into the press. The reference positions are provided by the chuck. | | |
 |
Wire-EDMing
The contours are produced on a WEDM center. The reference position is provided by the chuck. | | |
|
|
|
|
EWM HIGHTEC WELDING GmbH
|
|
 |
PHOENIX 301 PULS forceArc
Inverter DC welding machine for MIG/MAG pulse, decompact
HIGHLIGHTS
Maximum efficiency for all requirements with reproducible welding results and low-spatter welding thanks to the fully digital inverter welding technology
EWM-forceArc – the high-pressure arc – up to 30% faster welding with thick panels
Self-explanatory, intuitive operating concepts for everyone – your choice of various control concepts – optimised for the target group and the application
Optimum preset JOBs (welding tasks) and synergic operation – so that you can concentrate fully on your welding task
Maximum mobility: Easily movable thanks to large wheels, fits through standard doors, easy loading and unloading thanks to the even wheel gauge, can be lifted by crane and moved on a fork lift
Multifunctional and ergonomic grip system: Effort-less mobility, practical holder for tube packages, impact protection
Intelligent casing design with optimised air guidance for longer duty cycle and ventilation control for less contamination in the machine
PROGRESS, EXPERT: Ideal for robot, industrial bus and mechanised applications and documentation via optional interfaces
Powerful cooling system for the torch, with centrifugal pump, cooler with large surface area and an extra-large tank (12 litres)
MAIN AREA OF USE
Unalloyed, low-alloy and high-alloy steels, aluminium alloys, copper and its alloys, special alloys
Solid and fluxed-core wire electrodes (0.8-2.4 mm), coated electrodes: Rutile, basic
Production and repair work: Chemical and food industries, machine and plant construction, vehicle, automobile, railway vehicle and ship construction, container, closed container and equipment construction, steel and metal construction work, offshore, etc.
FEATURES
Multi-process inverter DC welding machine for MIG/MAG pulse, standard TIG, TIG Liftarc and MMA welding
Mobile, gas- or water cooled, decompact with separate wire feed unit, can be lifted by crane and moved by fork lift, 5m mains supply lead
More powerful temperature-controlled fan
Pressure monitor, pump and temperature-controlled fan
PHOENIX DRIVE 4L wire feed unit: 4-roller drive with 37mm drive rollers for steel (1.0 + 1.2mm), choice of Euro or Dinse central connection
100% tested and free welded
| | |
 |
PICO 162 MV
MMA and TIG Multivolt inverter DC welding machine
Automatic adaptation to country specific mains voltage (115 V / 230 V)
Lightweight and powerful machine
Optimised casing design
Excellent ignition and welding properties, e.g. even with rutile cellulose electrodes (RC)
100% construction site compatible for assembly work in the open air
Repair and production of machines, plant, construction and agricultural machines, rail cars, ships, boilers, closed containers, equipment construction, pipelines, etc.
Assembly and construction site usage, outdoor working, offshore
Portable, gas cooled
Innovative inverter technology for small, compact design and low weight
Ergonomic, modern casing design with no corners or edges
Unrestricted operation on generators
Latest inverter technology with excellent control dynamics for a stable arc for problem-free welding of critical electrodes, e.g. rutile/cellulose electrodes
Reliable and safe thanks to the protected layout of the operating elements in a stable design and positioning of the electronics in a dust-free area | | |
 |
PICO 300
MMA And TIG (liftarc) inverter welding machine
HIGHLIGHTS
Ideal for use on construction sites thanks to the specially designed casing for less dirt penetration into the machine
Extremely simple to operate thanks to one-dial operation
Professional MMA welding with high performance
Excellent welding properties – innovative inverter technology with digital control for a stable arc, easy-to-master weld pool, improved and problem-free welding of critical electrodes and adjustment option of the welding characteristic (arcforcing) to all electrode types.
Reproducible, safe ignition – automatic management depending on the electrode being used, high open circuit voltage and infinitely adjustable hotstart current and time
MAIN AREAS OF USE
Repair and production of machines, plant, construction and agricultural machines, rail cars, ships, chemical plants, boilers, closed containers, equipment construction, pipelines, pipe construction, cast components and more
Coated electrodes (rutile, rutile/basic, basic, rutile/cellulose and cellulose)
Unalloyed, low-alloy and high-alloy steels
FEATURES
Portable, gas cooled
Robust metal casing, with practical carrying strap as standard
Problem-free operation on generators and on long mains supply leads
Reproducible, safe ignition – automatic management according to the electrode used
Integrated temperature monitor for protection against overload and positioning of the electrodes in a dust-free area
Adjustable hotstart current / time and arcforcing, antistick
| | |
 |
TETRIX 400 Plasma
Plasma inverter DC welding machine
HIGHLIGHTS
Powerful plasma welding machine for maximun weld seam quality
Precise, high stability plasma arc for targeted and concentrated heat feeding
High welding speeds, deeper fusion penetration, low material distortion
Consistent results thanks to the separate inverter for the pilot arc current
Optimum protection of the plasma welding torch from the integrated coolant flow monitor
MAIN AREAS OF USE
Plasma direct current welding on the minus pole: Unalloyed, low-alloy and high-alloy steels, nickel, copper, titanium, zircon and their alloys, special materials
Repair and production work in the aerospace and space industries, cryogenics, food and chemical industries, machine and plant construction, vehicle, automobile, railway vehicle and ship construction, mould construction, container, tank, equipment and pipeline construction, etc.
FEATURES
Mobile, water cooled
One-dial operation, up to 256 pre-programmed welding tasks (JOBs)
Non-latched, latched, tapping mode, TIG pulses, currentless gas test
Adjustable parameters: Ignition, welding, secondary and end current, gas pre-flow and post-flow times, up and down slope times, pulse and break times, ignition managements
Precise settings and display of gas amount and comfortable functions for cold wire welding
| | |
 |
TRITON 170
TIG and MMA inverter DC welding machine
HIGHLIGHTS
Maximum functionality for professional TIG welding
Ideal for use on construction sites
Problem-free use on long mains leads and on a generator
Easy to operate, digital current display
MAIN AREAS OF USE
Food and chemical industries, pipe construction, metalworking trades, assembly and workshop usage
FEATURES
Portable, gas cooled, decentral
Robust metal casing
TIG welding with HF ignition and liftarc
Non-latched, latched, tapping mode, TIG pulses
Adjustable parameters: welding current, secondary current, down-slope and gas post-flow time
MMA welding: arcforcing, hotstart, antistick
Exceptional weight/performance ratio due to the optimised cooling system
Digital display for welding voltage or current
Remote control connection
| | |
 |
TRITON 260
TIG and MMA inverter DC welding machine
HIGHLIGHTS
Maximum functionality for professional TIG welding
HF ignition or liftarc
Simple operation – direct access to all welding parameters
Optimum ignition and welding properties
High mains voltage tolerance for problem-free use on long mains leads and on a generator
MAIN AREAS OF USE
Universal use, e.g. food and chemical industry, pipe construction, metal working trade, assembly and workshop
Unalloyed to high-alloy steels, copper, special metals
FEATURES
Portable, gas cooled, decentral, modular
TIG welding with HF ignition or liftarc, TIG pulse welding
Durable and robust thanks to the professional metal casing
MMA and MIG/MAG welding (option)
Digital control T101: 100% reproducible welding results with maximum quality
Standard interface for automation (start/stop, control voltage, current flows), including digital display for welding voltage or current
| | |
|
|
|
|
ewo Armaturen- und Autogengerätefabrik H. Holzapfel GmbH + Co.KG
|
|
 |
Ball valves
G 1/4 to G 3 | | |
 |
Quick connectors
Quick connectors
for plastic hoses | | |
 |
Quick-couplings in brass and steel
DN 5 - 7,2 -7,8 -10 and 12 | | |
 |
Shut-off valves Needle valves
Shut-off valves
Needle valves | | |
|
|
|
|
EWS Werkzeugfabrik Weigele GmbH & Co. KG
|
|
 |
Prototyping for special tools
With the Rapid Prototyping we can provide our customers even more security with regards swing diameter of your turret with new tools.
The exact manufactured plastic model allows our customers to simulate the required motion sequences without risk.
A new step for a process reliability of our customer!
| | |
 |
Push Slotting with EWS
Push Slotting on your Lathe with EWS-Slot | | |
 |
Tool Technologies
Tool Technologies | | |
 |
Tooth for Tooth
New tool system allows for gear cutting on CNC lathes without rechucking.
Precise gear cutting doesn’t come cheap. Until now it has been necessary to rechuck workpieces numerous times or use costly CNC lathes.
This need not be the case: EWS design engineers have developed, in collaboration with Gildemeister, a solution that allows gear-cutting tools to be used with conventional lathes. The new technique enables the cutter head to rotate steplessly all the way around the shaft, thus eliminating the need for costly B axes on the machine and allowing the entire gear-cutting process to be realized without rechucking.
| | |
|
|
|
|
Ex-Cell-O GmbH
|
|
 |
High Performance Machining Center XS 211
With its XS 211 / XS 321 machining center concept, MAG Powertrain is setting a new standard in the field of "Lean“ production. MAG Powertrain engineers have developed a manufacturing concept to meet the highest technological requirements at the lowest cost.
The result is a machining center with MAG Powertrain quality at an unbeatably low price. The XS 211 / XS 321 machine design is based on the MAG Powertrain modular machine concept. This guarantees that every machine can be individually constructed to meet a customer’s requirements. Whether aluminum, steel or grey cast iron machining, the XS 211 / XS 321 is the right solution for your manufacturing process.
The machine concept is designed for medium to high volume manufacturing. A special feature of the XS series is that of system integration. The advantage is that, with different automation interfaces, XS machining centers can be easily integrated into existing production systems.
Advantages of the XS 211 / XS 321
- Low initial investment
- Three-point location
- Use of well-proved components
- Short commissioning time
- Flexible automation concepts (front and top loading)
- The machine can be easily adapted to customer needs
- Very compact machine design
- Small footprint of machining center
- Excellent accessibility
- Available with Siemens or Fanuc control
- Modular machine structure
- Proven MAG Powertrain principle
- Directly driven table
- Column with X/Y cross slide
| | |
 |
MACH1-500 T (Oil Hole Driller)
Flexible and highly productive
The MACH1-500 T is a 2-spindle high-performance machining center designed for oil channel gundrilling, connecting rod and other small part machining applications.
This twin spindle machining center is loaded with innovative features, is easy to set up, easy to configure and easy to operate. With our patented design, this machine is capable of compound angle machining of two parts simultaneously making it highly productive. The MACH1-500 T delivers world-class performance at the lowest possible life-cycle cost. | | |
 |
MAG Powertrain Coldforming Racks
Proposal for Coldforming Racks | | |
 |
Transfer Lines
Transfer lines are suitable for high volume production. If there are requirements for limited part flexibility, a shorter cycle time and if space is an issue, then these requirements can be met. Transfer lines are also indispensible for heavy-duty metal cutting or if high precision machining has to be performed.
The individual machining sequences are divided into several stations arranged in one line (sequential) and connected with a rigid transport system. The single stations can only perform one machining operation as previously defined. The downtime of one station causes the whole line to come to a halt and thus the output goes down to zero.
Transfer lines systems are constructed from modular units. This design ensures that the Transfer lines can be installed quickly in their final position. The individual stations are so-called "hook" stations, and this enables the line to be started up one station at a time.
The main advantages of the standardization of the slide units are:
smaller stocks of spare parts
greater flexibility in conversions
simplified maintenance and overhaul
The modular slide units can be single-axis, cross-slide, or rotating-axis units. As line extensions we can also offer high-speed triple-axis units with moving speeds up to 40 m/min; these are used with a motor spindle or a 6-spindle revolver head.
The main pipes as well as the electric power rails and the principal cable duct run via the electrical cabinet. The single-sided installation allows good access from the op-posite (free) side for maintenance and other purposes.
The control routes are short because of the control plates on the jigs.
Within the Transfer lines, the loading and unloading section forms an important functional unit together with the work-piece transporting section, which is designed as stroke-step transport and Plant mechanically. It works from a slide unit with a ball-thread drive from a servomotor.
The shavings are removed in the central section or under the floor.
| | |
|
|
|
|
Exel Lackier- und Beschichtungs- systeme GmbH
|
|
 |
Spezielle Ausrüstung zur Verarbeitung von Wasserlacken
Beim Verarbeiten von Wasserlacken müssen Pumpe und Lackbehälter isoliert in einer "Isolierblase" untergebracht sein. Dieses sehr kompakte Gehäuse kann ganz in der Nähe der Spritzkabine installiert werden. Da es mit einer breiten Schiebetür versehen ist, kann der Lackierer schnell und einfach Farbwechsel oder Druckveränderungen vornehmen.
Der Hochspannungserzeuger ist in der Isolierblase montiert und lädt den gesamten Farbbehälter inkl. Pumpe auf (Innenaufladung). Dadurch ist die Pistole extrem leicht und es wird kein Kabel zur Pistole benötigt. Durch den einzigartig hochflexiblen Materialschlauch ist das arbeiten mit der Pistole auch in engen Räumen, z.B. in der Flugzeugindustrie, dem Fahrzeugbau oder Maschinenbau.
Ein eingebautes Sicherheitssystem sorgt dafür, das beim loslassen des Abzugshebels und beim öffnen der Schiebetür die Stromzufuhr zum Hochspannungserzeuger gestoppt wird und gleichzeitig Pumpe und Behälter geerdet werden.
Die spezielle Ausrüstung zur Verarbeitung von Wasserlacken kann für alle Applikationstechniken aus unserem Angebot verwendet werden. Luftzerstäubend und Airmix® in Hand oder Automatikausführung
| | |
|
|
|
|
Exeron GmbH
|
|
 |
AWEX 50/4
The new inexpensive automation for one machine. Four palettes and 50 electrodes make a EDM to a eroding cell and extend machine working periods and therefore its competitiveness.
All current clamping systems can be used.
The automation is also on consisting machines exchangeable. | | |
 |
Die-Sinking-Eroding-Machine
Highest stability by FEM-optimated, undivided machine frame
Optimized floor space by integration of all process-relevant systems and aggregates
Rise / fall, filled moveable tank for free accessibility to the workpiece
Fully simultaneous CNC-control on PC basis with Windows operating system
High-Power-Generator-Technology based on the n-principle with strategic operating technologies
Digisparc-optimated eroding process
Practice-oriented realization of CE-/EMV-regulations
Made in Germany
| | |
 |
EDM 312
Die-Sinking-Eroding-Machine
Characteristics
Highest stability by FEM-optimated, undivided machine frame
Optimized floor space by integration of all process-relevant systems and aggregates
Rise / fall, filled moveable tank for free accessibility to the workpiece
Fully simultaneous CNC-control on PC basis with Windows operating system
High-Power-Generator-Technology based on the n-principle with strategic operating technologies
Digisparc-optimated eroding process
Practice-oriented realization of CE-/EMV-regulations
Made in Germany | | |
 |
EDM 316 / 316 XXL
Die-Sinking-Eroding-Machine
Characteristics
Highest stability by FEM-optimated, undivided machine frame built in hybrid construction
Integrated dielectric device with automated cooling for constant working conditions (optional: reflushing filter)
Digital AC-Servo-drives in the center for highest operation- and control dynamic
Rise / fall, filled moveable tank for free accessibility to the workpiece and short fill and empty times
Fully simultaneous CNC-control on PC basis with Windows operating system
High-Power-Generator-Technology with Digisparc-optimated eroding process
Optimal proportion axes-travel to floor-space
Made in Germany
| | |
 |
exo-cell 100/8
The complete solution in the case of automation. A eroding cell which consists of 2 EDMs (exeron 312 and exeron 313) and a FANUC industry robot, which provides both machines with electrodes and palettes (up to 70 kg weight). Automation which leaves nothing to be desired concerning flexibility and composition posibilities. | | |
 |
High-Speed-Cutting-Center
The compact DIGMA-High-Speed-Cutting-Center HSC 200 offers ideal performance characteristics for the highly flexible manufacturing of electrodes in mold-and die production - excellent surfaces, perfect reproducibility and high economic efficiency on only 2 m2. | | |
 |
HSC 300
The new High-Speed-Cutting-Center HSC 300 offers its users excellent performance in small space at low investment costs.
Characteristics
Portal design with high rigidity for optimal machine dynamics, high precision and perfect work piece quality
Portal and machine base made from concrete polymer to ensure maximum damping
Digital direct drives in all axes
Direct distance measuring systems, resolution 0,1 µ
Vektor-controlled high-frequency spindles for the use of tools up to Ø 0,2 mm
Excellent CNC control systems geared to HSC technology
Intelligent high-performance dust extractor ensures trouble-free manufacturing of graphite
Optional extras
High productivity and availability at multiple shift operation with limited surveillance through pallet change systems
Increased autonomy through larger tool magazines
Maximum handling comfort is guaranteed by infrared measurement caliper in combination with optimized measuring cycles
Additional useful accessory leaves nothing to be desired | | |
 |
HSC 800
The new dimension in mold-and die making
Production benefits
Harmonious interplay of extremely high spindle frequencies, feed rate and machine dynamics
Uniform cutting parameters at the tool edge
Smooth, flowing axis movements for excellent surfaces (Ra up to 0,2 µ) and high precision (up to 3 µ) in hardened steel processing
Hardened steel workpart processing up to 64 HRC
Low thermal influence on the workpart
Fast HSC-controls with great ease of operation
Commercial benefits
Increase in ablation rate and surface quality
Reduction of finishing and lead times
Reduction of end-to-end manufacturing time by up to35 %
Key technology for mold-and die manufacturing in hardened steel processing and a cost-effective complement to die-sinking-EDM
Optimal use of the performance potential of modern EDM generators through fast, reproducible manufacturing of graphite electrodes
The technical qualities of the HSC 800
HSC 800 High-Speed-Cutting-Center with excellent performance characteristics and optimal feed in X/Y/Z axes
Perfect machine dynamics, high precision and excellent workpiece quality
Water-cooled, mineral cast portal and machine bed for great dynamic, static and thermal stability
Digital drives on all axes with direct position-measurement systems
Vektor-controlled high-speed spindles for use with tools of Ø 0,2 mm and upwards
CNC-controls of the newest generation, with great ease of operation (HEIDENHAIN iTNC 530 Windows multiprocessor controls)
Enhancement levels
Larger tool magazines (up to 90 positions with HSK 40-E, up to 81 positions with HSK 50-E)
Larger set-up area combined with longer Y feed (930 mm)
Pallet exchange system for even greater productivity and availability in multi-shift operation
Intelligent, high-performance dust exhaust system for trouble-free processing of graphite
Automatic handling systems
| | |
|
|
|
|
EXPRESSO Deutschland GmbH
|
|
 |
Four-wheel carts – order-picking carts – transport carts
Heavy loads moved easily, safely, and quickly
The use of high-quality, professional order-picking and four-wheel carts supports and improves productivity and efficiency during goods handling and transport.
Our comprehensive range of carts and trolleys offers smooth-running, application-oriented solutions that are convenient and flexible. A decisive contribution for optimized logistic procedures. This enables your employees to move loads ergonomically and at the same speed throughout the working day, and also helps you comply with increasingly strict accident prevention regulations.
With battery power on request
All order-picking carts with a minimum width of 500 mm can be fitted with the smart touch2move drive technology. Hereby, the cart obeys the user's natural, intuitive movements during manoeuvering – without physical effort.
| | |
 |
Hand trucks – efficient and safe transport of goods
Our aluminium hand trucks – as individual as your transport tasks
For more than 50 years, our aluminium hand trucks have been used successfully by professionals in countless business sectors, such as the beverage industry, the foodstuffs industry, with parcel delivery services, and generally as a vehicle companion. More than 2000 different hand truck versions, individually manufactured from our modular system, are available ex-stock. Users worldwide have been convinced by the large range of standard components such as different footplates, wheels, handles, heights & widths, plus the original spare parts service. Their exceptional strength, long service life, and permanent availability underline their outstanding economic advantages.
| | |
 |
Lift&Drive – mobile and battery-powered
Lift&Drive – Productivity increase through individual standards
Thanks to their user-oriented application possibilities, our mobile lifts increase productivity. These intelligent goods handling solutions enable complex and physically demanding operations to be carried out simply, safely, ergonomically, and therefore efficiently.
The lifting aids are adapted individually, depending on load, application location, user, and type of goods handling.
Everything is possible with Lift&Drive: Lifting, lowering, rotating, turning, gripping, tipping, holding, positioning, pushing ... and lots more.
| | |
 |
MobiCrane – the ergonomic lifting system
Unique, patented vacuum technology for that extra plus in efficiency
Loads that previously could only be handled with expensive accessories, can now be handled efficiently and ergonomically with the mobile MobiCrane vacuum lifter. Thanks to the adjustable lifting height, the operator always maintains an optimal and ergonomic posture when lifting and moving loads up to 80 kg.
| | |
 |
Modular system – customized transport solutions
We don't know yet what you need. But we can certainly provide it!
Your requirements for working equipment are just as individual as the persons using them. Regardless of whether the equipment must be application or user-oriented, or both – EXPRESSO offers a perfect solution for every professional need.
Because EXPRESSO's quality aluminium products such as the hand trucks are manufactured from a modular system and are therefore light and durable, they have made a decisive contribution towards the positive image of aluminium transport and goods handling equipment during the past decades.
Not conventional – but individual
Our modular system and top-quality materials make it possible: We rely on competent partners and quality “made in Germany”. That's not an empty phrase, but practiced company philosophy at EXPRESSO – and a new challenge every day.
| | |
 |
touch2move – the smart drive concept
Optimized logistics with powered vehicles
Thanks to the touch2move drive technology, transporting heavy goods is not only more efficient, but also significantly safer. Simply by touching the sensor handle, the trolley “obeys” the operator's natural movements, and automatically adapts to his/her walking speed. The touch2move drive concept can be fitted to practically to all four-wheel trolleys and other transport carts, which are then classified as 'walkie' type vehicles according to accident prevention regulations, and are also entitled to be marked with the CE sign.
| | |
|
|
|
|
Extramet AG
|
|
 </ |
| |
