|
|
|
DYROS ApS
|
|
 |
Connector sleeves.
Dyros connector sleeves for repair of thread pipes are turned of brass or steel in sizes of 3/8” bis 2”.
All connector sleeves are supplied with stainless steel compression ring, stainless steel slide ring, and mould seals of EPDM rubber, which can endure temperatures
from -40 degr. to +140 degr. C. | | |
 |
Hose clamps.
Dyros hose clamps of electroplated steel or stainless steel are available in sizes
from 9 mm to 35 mm | | |
 |
Hose connector fittings
Dyros adapter pieces – hose connector fittings are all turned of solid brass with mould seals of nitril-rubber, suited for both water and oil.
Dyros adapter pieces are supplied chromium – plated.
Dyros hose connector fittings are supplied both of raw brass and nickel-plated. | | |
 |
Quick Connectors
Dyros quick connectors series 6 – 10 – 30 – 40 – 80 – 90 are specially developed for cooling fluids on plastic moulding tools and are to be found in all places, where small dimensions, trustworthiness and safety are appreciated. | | |
 |
Water hose connectors
Dyros water hose connectors series 100 – 2000 – 3000 with respectively 11 – 15 – 20 mm passing capacity are one of the most popular on the market, and are widely used in many places, f.inst. in plumbing installations, on high pressure scrubbers, on laundry machines, on garden hoses, in industry and by private consumers.
All connectors are turned of massive brass and chromium – plated.
Locking balls and – springs are of stainless steel, O-rings and thread packing of
Nitril-rubber, which is especially suited for water from -30 dgr. to +100 degr. C. | | |
|
|
|
|
Dr. BOY GmbH & Co. KG
|
|
 |
BOY 12 A-M
The BOY 12 was specially designed and built for the manufacturing of micro-parts.
It is exceptionally compact and designed as a reliable small machine for continuous industrial duty.
The BOY 12 plasticizing units feed very small injection volumes of up to 0.1 cm³ with precision and repeatability.
Three plasticizing units are available with diameters of 12, 14, and 18 mm.
The BOY 12 is a fully controlled, hydraulic reciprocating screw injection moulding machine with a two-platen clamping unit. The clamping cylinders are integrated into the fixed platen. The clamping platen with linear guides, the special design for small moulds with precision centring of the clamping platens, specially designed feed openings, stainless steel hopper, a drawer for catching the micro parts and screw stroke recording with higher resolution are all examples of how the BOY 12 is optimally equipped for micro part manufacturing.
| | |
 |
BOY 22 A-M-D
This model has been produced since 1968 with the same basic technical design. To this day, more than 25.000 machines of this series were sold, with the machine concept being continously refined and the capacity increased. The BOY 22 has been perfected down to the last detail and excels through its high reliability and an extremely low machine hour rate.
This injection moulding machine is extremely compact and has a cantilevered clamping unit. The design is simple, organized, and ergonomic, with platen dimensions that are very generous. The injection unit can be optionally mounted vertically for parting-line injection.
The BOY 22 is available with three different controls:
• BOY 22 A with the high-end microprocessor Procan ALPHA control
• BOY 22 M with the mid-range Procan MD control
• BOY 22 D with the Dipronic control
| | |
 |
BOY 22 A/M VV/VH
The BOY 22 V injection moulding machines are used especially for the fully automatic encapsulation of inserts or for continous production lines. They are a modification of the BOY 22 and are manufactured with largely the same components.
The 90° rotation of the two-platen clamping unit results with the advantage of a fixed lower platen. Thus, the inserted parts will not move during the clamping process.
The BOY 22 VV offers the best possibilities for inserting and removal, compact dimensions, and ample free space for peripheral equipment on the rear machine table.
The vertical clamping unit can be equipped with either a vertical injection unit as with the
BOY 22 VV or with a horizontal (parting line) injection unit as with the BOY 22 VH.
| | |
 |
BOY 35 A/M VV
The BOY 35 VV injection moulding machine is equipped with a vertically arranged injection and clamping unit.
The 90° rotation of the two-platen clamping unit results with the advantage of a fixed lower platen. Thus, the inserted parts will not move during the clamping process.
Compact dimensions, ample free space for peripheral
equipment, and the ability to use smaller injection units make the
BOY 35 VV with four tie bars an ideal solution for fully
automatic encapsulation of inserted parts.
The BOY 35 A VV is equipped with the high-end
Procan CT ® control, the BOY 35 M VV with the mid-range
Procan MD ® control.
| | |
 |
BOY 55 A/M
The fully hydraulic BOY 55 injection moulding machine is characterized by its precision, high efficiency, and compact design.
Its low operating costs and reliable performance make it ideally suited for mass production.
The very compact design of the two platen clamping unit reduces the space required by the BOY 55 compared to conventional machine designs with the three-platen principle. Due to the cantilevered clamping unit, no additional space is required for part conveyors or containers. The ejector chute is freely accessible from all sides, permitting optimum removal of the moulded parts.
| | |
 |
BOY 55 A/M VV
With the introduction of the BOY 55 VV insert moulding
machine, BOY have expanded their range of machines.
As with the successful BOY 22 VV and BOY 35 VV
models, the design of the new BOY 55 VV is based upon
proven technology.
A clamping force of 550 kN, as well as shot weights up to 158.9 g (PS) max.
Generously spaced tie bars (360 x 335 mm) allow the mounting of both large and family moulds.
Low table height (distance between fixed lower platen and floor) of 975 mm.
The fixed lower platen was achieved by turning the standard horizontal machine´s two-platen clamping unit by 90 degrees. This advan-tageous configuration prevents the move-ment
of insert parts during the mould-closing phase of the cycle!
Compact dimensions and ample space for peripheral equipment on the machine sup-port guarantee optimum
opportunities for integration into automated production lines.
The new BOY 55 A VV is equipped with the Procan CT ® control,
the BOY 55 M VV with the mid-range Procan MD ® control | | |
 |
BOY 90 A/M
The fully hydraulic BOY 90 injection moulding machine (the largest machine in the BOY range) is characterized by its precision, high efficiency, and compact design.
Its low operating costs and reliable performance make it ideally suited for mass production.
The very compact design of the two platen clamping unit reduces the space required by the BOY 90, compared to conventional machine designs with the three-platen principle. Due to the cantilevered clamping unit, no additional space is required for part conveyors or containers. The ejector chute is freely accessible from all sides, permitting optimum removal of the moulded parts.
| | |
 |
Procan ALPHA ®
Since its introduction in 1998, the high-end control for the A series with touchscreen operation and windows-based display pages, has set standards which other companies were forced to follow.
Direct screen selection and input via touchscreen greatly simplifies operation.
The choice of six selectable speed ranges with additional ramp function for open, close, injection, and plasticizing are included in the standard scope and ensure smooth, harmonious movement sequences.
By using six individual hardware comparators, the shortest cycle and reaction times are achieved and the highest reproducibility is reached.
Communication with peripheral equipment and a visual display system are possible via the integrated industrial-standard personal computer. | | |
 |
Procan MD
This microprocessor control system, which has proven its value thousands of times, was introduced in 1993 and has become one of the most successful microprocessor control systems.
High reliability and simple operation are characteristic features of this control system for the M series.
The combination of hardware control and microprocessor facilitates shorter sequence and cycle times - an advantage that is welcomed by many users.
Further advantages of the PROCAN MD include integrated help texts, message and alarm signalling systems, and SPC / SPQ functions meeting the requirements of Q 101 standards.
Via keycard, the Procan MD control is protected against unauthorized access.
| | |
|
|
|
|
Dow Automotive (Deutschland) GmbH
|
|
 |
Dow Calcium Chloride
Calcium Chloride products from Dow have been trusted for over a decade. Our products, sold under the trademarks of PELADOW™, LIQUIDOW™, DOWFLAKE™ Xtra, COMBOTHERM™ and BRINERS CHOICE™ are used in a wide variety of applications, including snow and ice control, dust control, ready-mix concrete and agriculture. | | |
|
|
|
|
Dornbusch Gravuren GmbH
|
|
 |
Embossing Plates
Embossing Plates are produced in large variety of sizes for an extemely extensive range of applications. First class skill and precision are crucial. | | |
 |
Hand Engarvers.
In spite of high technology, it is still necessary to utilise the highly skilled abilities of the Hand Engarvers | | |
 |
Production and engraving of Embossing Rollers
Production and engraving of Embossing Rollers of varying dimensions for numerous applications, requires a high degree of experience and skill. | | |
|
|
|
|
Dorit Fleischereimaschinen GmbH
|
|
 |
Ham presses
Our presses enable three-dimensional form pressing of various products at 8 bar working pressure.
Our heavy-duty ham presses with pneumatic control to improve and promote the maturing process
of raw ham and long-life products, for optimum shaping, reduced cutting losses, solid consistency
and well-balanced distribution of the brine.
Information:
COMBI-PRESS CP-50
COMBI-PRESS CP-50-C
COMBI-PRESS CP-70
HAM PRESS
HAM PRESS WITH 1 ATTACHMENT
HAM PRESS WITH 2 ATTACHMENTS
Rugged, all stainless steel press designed for prepressing to the required calibre
and airless stuffing into casings, nettings, or bags in fully pneumatic operation
Pneumatic safety controls for simple operation and initiation of pressing and filling
processes by shutting the safety hood. Moulding and netting components can
be replaced in seconds without tools
Moulds come in 9 sizes, in calibres of 80 to 170 mm with a mould length of 500 mm
For cooked and drey cured meat products such as butt, shank and rolled ham,
picnic ham, various types of bacon, etc.
Compressed air controls: minimum 6 bar working pressure | | |
 |
Pickle injector
Typical for all Pickle injectors produced by the Meat Processing Equipment Group DORIT/DFT, is an even brine distribution achieved by an ideal needle pattern.
Appropriate injection and brine filtering systems ensure injection success with all kinds of brine of different viscosities. On top of this, our pickle injectors are also userfriendly in operation, in maintenance and in cleaning.
Sturdy new pickle injector for automated industrial production
Rugged, heavy-duty stainless-steel construction throughout
Needle head of air-cushioned needles in 4.5 mm / 3.0 mm diameter with
3.0 mm / 2.0 mm injection tips, easy to remove and replace
For injection of bone-in and boneless products | | |
 |
Vacuum Tumbler
DORIT/DFT is able to supply a complete range of vacuum tumblers with a capacity from 20 to 10.000 litres, due to our long history of production in this field. Within our expansive range of equipment, we can offer the ideal unit for butcher, shops or restaurants and hotels, as well as units for medium and large industrial processors. Further technological alternatives available to our customers are our vacuum pressure- and cooling tumblers, which work either together as a double-jacket version with glycol or as units, injecting liquid nitrogen or carbon dioxide. This procedure guarantees an optimal protein extraction.
Advanced meat processing machine in rugged stainless steel construction for
industrial meat processing plants and other large-scale operations
Ideal for the massaging of cooked cured products, salt impregnation and
braising and in-depth salting of dry cured products; dry salting, seasoning
and marinating, game and goulash; mixing of salads. dressings and sauces;
tenderising of fresh meats; salting, seasoning and processing of fish and
seafood products
Horizontally rotating drum with 3-point support on solid frame
| | |
|
|
|
|
Doranova Oy
|
|
 |
Cost-effective options for every farm
Doranova Ltd. offers new innovative concepts for controlling agricultural waste flow's, especially for handling sludge. With the help of our system, dry matter, concentrated fluid and pure water can be separated.
By that the sludge quantity can be reduced by as much as 70%. The gathered dry matter can be used as soil supplement or phosphate fertilizer. The concentrated liqud is easy to store due to its small capacity and, furthermore, it cantains nutrient fertilizer in a compact medium. The gained water is safe and can be reused or released into the nature.
| | |
 |
DoAct® product family - achievement of our own product development
Cost- efficiency and simplicity are at their best if you use our DoAct product family. We have developed and produce all DoAct filters ourselves and their operation does not demand, in normal circumstances, any additional measures besides monitoring the quality of purified water. The long maintenance intervals and the possibilities to change filtration media guarantee durability and ease of use.
If you order a DoAct filtration system from us, we will tailor the filtration media for the system always according to the purification project and harmful substances. The DoAct filtration systems is suitable for a wide variety of needs and projects of all sizes. The system is designed to be easily removable. The appealing features of DoAct systems are its speed and cost-efficiency. We have delivered a perfectly functioning filtering system in 12 hours!
TECH servicing package can be added to any DoAct filtering system. In this case, we take care of everything for the customer - transportation of the filtering system, implementation, starting, operation, checking, necessary maintenance works and termination. Could a purification project be easier than that?
| | |
 |
Soil - Water - Air Techniques for purification
Among others, we use technology as follows:
In-situ bioremediation
In-situ electrokinetic remediation
Biowall / Reactive walls
Bioventing
Pump & treat
Soil vapour extraction
Groundwater air sparging
Wet sorting technique
Microfiltration systems
Reverse osmosis system as well as landfill systems
Oil separators
Raw- and wastewater treatment systems
DoAct® -product family
Removal of radon from internal air and water of drilled wells
Removal of iron, fluoride and arsenic from drinking water
Wide choice of means ensures that our customers always get the best and most innovative technology in a cost-effective way. We know our equipment well and offer always the best solutions for our customers to deal with their environmental problems.
| | |
 |
The very likeable members of our DoAct product family are:
DoAct LIGHT easy filtering
DoAct MAXI container filtration system
DoAct BOOSTER pressure filtration system
DoAct METRO underground filtration system
DoAct GAS-TECH gas treatment centre | | |
|
|
|
|
DONAU Werkzeugmaschinen GmbH & Co KG
|
|
 |
cnc rapid radial drilling machine
cnc rapid radial drilling machine | | |
 |
DANUFLEX® 135 and 145
Quality and an excellent Price / Performance Ratio
With the DANUFLEX series of machines, reflecting the modern state of art in engineering, DONAU offers a successful drilling concept that has been proven worldwide. Particularly in machining single pieces and small batches DONAU earned a name. Some of the problems encountered in this field , such as marking out, centre punching and time-consuming centering on milling machines, can now be done seperatly, thanks to an intelligent position indicator offered by DONAU as an optional accessory.
DONAU machines are versatile and convince users by an unmatched cost – performance ratio. Every application is a particular challenge for the professionals at DONAU.
Quite a number of practice-oriented solutions for problems were brought forward in dialogue with customers and users, and matured into series production.
DANUFLEX Advantages . Attractive cost-performance ratio . Drill moving to the machining position in working cycle. Unrestricted accessibility from all sides. Also suitable for series work | | |
 |
DANUMERIC®...
The DANUMERIC® ... Setting standards and saving costs
Designed to be used for one-off and small series production, the DANUMERIC® is setting standards of drilling technology and economical production.
Savings of up to 75 % of costly set-up and non-productive times make the DANUMERIC an investment that’s paying itself. For drilling work there is hardly another solution at hand that would be more intelligent and flexible than the CNC-controlled Rapid Radial Drill of DONAU. With a DANUMERIC®, marking out, centre punching and time-consuming aligning of workpieces are history. The combined advantages of a rapid radial drilling machine and an efficient CNC control deliver cost savings and are helpful in avoiding manual errors. | | |
 |
DANUPORT®
The DANUPORT® from DONAU presents a combined technology. It delivers the advantages of a travelling column & pendular machining center and a CNC controlled rapid radial drilling machine.
Large voluminous workpieces are welcome. With the 5th CNC axes (travelling column) the possibilities of the DANUPORT® are multiple. With a X-axis travel of up to 20,000 mm / 65 ft machining large-surface workpieces gets possible. As an option, this machine can be equipped with a tool magazine, reducing off-times especially in a pendular situation.
DANUPORT® Advantages
No marking out or center punching
5 CNC axes
Pendular machining possible
No aligning of workpieces
Also suitable for large series production
Simple programming, no prior CNC knowledge required
Unrestricted manual operation | | |
 |
DONAU® alpha
Drilling – straight to the point
The alpha-type rapid radial drilling machine from DONAU offers high drilling capacity at a low price! It covers a vast range of workpieces, is very easy to operate and of robust structure. It is cost effective to use the drill for one-offs as well as for small series.
The machine is particularly suitable for workpieces where drill positions are easy to define. Three feed speeds and one spindle speed range, providing 18 spindle speeds, are making the alpha an ideal drill for all standard applications.
Large working area for much flexibility
Large drilling capacity
Easy sliding manual movement
Ideal for small seires at low tarif costs per hour | | |
 |
milling drilling center
milling drilling center | | |
|
|
|
|
DOMO Caproleuna GmbH
|
|
 |
floor coverings
DOMO® - one of the largest manufacturers of floor coverings - bases growth and innovation on their own production of high-quality chemicals and plastic intermediates. | | |
|
|
|
|
DOJATEC Sonermaschinen GmbH
|
|
 |
Eggwash systems
Eggwash systems | | |
 |
Fat Glazing systems
This part of our homepage gives you an overview of all the Fat Glazing systems we offer. Feel free to contact us for further informations and informations about special constructions | | |
 |
Glazing/Icing systems
Glazing/Icing systems | | |
 |
Special machines
This are just a few of the Special machines and constructions we have already built - to give you an short overview of possible solutions for special tasks. Feel free to contact us for further informations | | |
 |
Transport systems
This part of our homepage gives you an overview of all the Transport systems we offer. Feel free to contact us for further informations and informations about special constructions.
| | |
|
|
|
|
DOERKEN MKS - Systeme GmbH & Co. KG
|
|
 |
Dip draw coating system
Dip draw coating system | | |
 |
Dip spin coating system
Dip spin coating system | | |
 |
EC-Automat 2000 +
Coating lines / EC-Automat 2000 + / | | |
 |
Spin coating system
Coating lines / Spin coating system / | | |
|
|
|
|
DOCERAM GmbH
|
|
 |
| | |
 |
DOCERAM
Ceramic centring pins
Locating pins
Change and base electrodes
Complete electrodes
Alignment pins
Gas nozzles
CAD/CAM blanks for dental application
Various ceramic parts for machinery equipment | | |
 |
DOCERAM Advanced Ceramic Solutions
DOCERAM
Advanced Ceramic Solutions | | |
|
|
|
|
DoALL Sawing
|
|
 |
2013-V3 - Vertical Contour Saw
PRODUCTIVITY PACKAGE
Frame
Unitized Frame arc-welded steel
Band Speed
Variable Band Speed 30 to 320/550 to 5,500 fpm (9 to 98/168 to1,675 mpm)
Work Height
13 in. (330 mm)
Band Wheels
Wheels aluminum with crowned rubber tires
Band Width Capacity
Band Width Capacity 1/16 to 1 in. (1.5 to 27 mm)
Table Size
Table 26 x 26 in. (660 x 660 mm), tilt 45°R, 10°L
Band Length
Saw Band Length 12 ft. 10 in. or 154 in. (3,910 mm)
Upper Wheel Adjustment
Upper Wheel Adjustment 3 in. (75 mm)
Band File Length
File Band Length 153 in. (3,890 mm)
Color
DoALL Blue
| | |
 |
C-430A - Production Power Saws
Max Cutting Capacity
17 in. high x 17 in. wide (430 x 430 mm) rectangles, 17 in. (430 mm) rounds
Blade
Band saw blade 1-1/4 x 180 in. (34 x 4,575 mm)
Band Speed
Infinitely variable band speed drive 60-400 fpm
Motor Capacity
Total motor capacity 7.5-hp (5.5 kw)
Band Drive
Band drive 5-hp (3.7 kw)
Hydraulics
Hydraulic system 2-hp (1.5 kw)
Band Wheels
Wheel diameter 20 in. (510 mm)
Coolant Pump
Coolant pump 1/10-hp (.075 kw)
Min Butt End
Min. butt end with automatic feed 4 in. (100 mm)
Pass Line Height
(minimum) 30-1/2 in. (775 mm)
Index Length, Single
Single automatic index length 20 in. (510 mm)
Color
DoALL Blue
Index Length, Min
Min. automatic index length 3/8 in. (10mm)
| | |
 |
C-916M - General Purpose Saws
Max Cutting Capacity
At 90° 9 in. high x 16 in. wide (230 x 405 mm) rectangles 10-3/4 in.(275 mm) rounds
Band Tension
Band Tension spring loaded by handwheel
Max Cutting Capacity-Right
At 45° 9 in. high x 8 in. wide (230 x 200 mm) rectangles 8 in. (200 mm) rounds
Band Wheels
Wheels 14-1/2 in. (370 mm) dia. cast iron
Band Length
Band Length 158 in. (4015 mm) max.
Vise
Vise manual
Band Speed
Band Speed variable, 105 to 275 fpm (32-84 m/min)
Coolant Capacity
Coolant System 5 gal. (19 liters)
Band Feed
Feed Control infinitely variable, hydraulic control, spring-balanced head
Color
DoALL Blue
| | |
 |
C-916S - Angle Cutting Saws
PRODUCTIVITY PACKAGE
Max Cutting Capacity
At 90° 9 in. high x 16 in. wide (228 x 406 mm) 10-3/4 in. rounds (273 mm)
Band Tension
Band Tension spring loaded by handwheel
Max Cutting Capacity-Right
At 45° 9 in. high x 10-3/4 in. wide (228 x 273 mm wide) 10-3/4 in. rounds (273 mm)
Band Wheels
Wheels 14.5 in. diameter cast iron (368mm)
Band Length
Band Length 159 in. maximum (4038 mm maximum)
Vise
Vise manual
Band Speed
Band Speed variable, 105 to 275 fpm (32 to 83 mpm)
Coolant Capacity
Coolant System 5 gallons (19 liters)
Band Feed
Feed Control infinitely variable, hydraulic control, spring-balanced head
Color
DoALL Blue
| | |
 |
DoALL Plate Saws - Special Application Saws
Work Height
18" (460 mm)
Band Drive
15 HP (11 kw)
Band Width Capacity
2" to 2-5/8" (54 - 71 mm )
Band Wheels
Dual-size band wheels
Band Speed
Variable Band Speed 40-360 FPM (12-110 m/min)
Color
DoALL Blue
| | |
 |
saw blades
Bi-Metal saw blades
| | |
|
|
|
|
DMH Maschinenhandel Deutschland GmbH
|
|
 |
CANDY PROCESSING MACHINES
Confectionery production and packaging lines
Complete lines and spezial machinery for manufacturing and processing of chocolate, cocoa, nuts
Mogul plants, Hardcandy lines, Starchless lines | | |
|
|
|
|
DMA Maschinen- und Anlagenbau GmbH & Co. KG
|
|
 |
Cage stack transfer device with cage storage
Empty containers are efficiently put into storage with the help of this system, or are added to the manufacturing process as needed. The greatest possible ground clearance of the system offers a high degree of hygiene through optimal cleaning possibilities | | |
 |
Combining
The arriving multi-lane product lines are combined to one line | | |
 |
Conveying systems
In large bakeries, the DMA systems are already in successful use for the automation and support of a trouble-free manufacturing process | | |
 |
Conveying systems
Transportation of bottles / glasses from pressureless separation up to the palletiser infeed. Upon customer request, available in single-strand or multi-strand design with the appropriately required guide rails.
| | |
 |
conveying technology
conveying technology for the food industry | | |
 |
Heliflex Storage System
To increase product line efficiency, it is necessary to intercept system-bound faults. By using the Heliflex Storage System, the effectiveness of an entire product line can be increased by 5% to 20%. | | |
 |
Spiral conveyor
Long conveying distances (e.g. product cool down) are implemented in a space-saving manner with the spiral conveyor. | | |
 |
Stacker and Destacker
For plastic cages, for example
With a capacity of 2,500 cages per hour, the containers are stacked or destacked to load them onto downstream transport lines or to cage storage.
| | |
|
|
|
|
DISKUS-WERKE Schleiftechnik GmbH
|
|
 |
grinding elements
grinding elements | | |
 |
horizontal spindle
horizontal spindle | | |
 |
IONIC
IONIC18 in machine control panel
The Diskus IONIC18 is a measuring control for computer-supported regulation of the finished dimensions of parts produced in continuous operation with face grinding machines. It is available as a single unit or as an integrated version in the machine control panel. | | |
 |
Vertical spindles
Vertical spindles | | |
|
|
|
|
Diosna Dierks & Söhne GmbH
|
|
 |
Crumbing Machines
Commercial use of unsold products
· Rough grinding of grain and seeds
· Reduction of ingredients just before they are used to cut purchasing costs, improve freshness and simplify storage
Standard equipment: · 2 plate sieves (10 and 20 mm)
· 1 screen (6 mm)
· 1 collecting bag
· 1 filling hose
· 1 spreader ring for continuous feeding
Description:
The DIOSNA RZ 4 Crumbing Machine for waste bread is universal, highly effective and therefore also very efficient.
The effectiveness of the DIOSNA RZ 4 Crumbing Machine is due to the interaction of the crumbing tolls with sieves. Plate sieves and sreens of varying sifting fineness to produce all grades from pulverized breadcrumbs to coarse reduction of waste bread, cake, etc.
The DIOSNA RZ 4 is made almost entirely of stainless steel. It is mobile, of compact space-saving design and the official German GS safety approval. The filling funnel with antiscatter opening features a rapid-action lock so that the entire unit can be easily folded back for easy cleaning.
A powerful direct drive is combined with an effective braking facility for simple and completely safe operation.
| | |
 |
Kneading Machines
Convincing mixing technique in dough-making | | |
 |
Mixing Plants
High economy with automatic dough-making | | |
 |
Rapidojet
The revolution in dough-making | | |
 |
S 200 A to S 240 AZ The kneading strength for successful bakeries
High mixing intensity
· Guarantees increase volume of product
· Especially suitable for wheat, rhy and whole-meal doughs
· Functional bowl covering cap for non-penetration of dust
· Movable bowl with standard DIOSNA bowl clamping device
· Simple cleaning
· Easy to operate, almost maintenance-free
· Programmable time sequence, manual intervention possible at any time
· Optional data memory with membrane keyboard
| | |
 |
Spiral Mixers
mobile with fixed bowl
· or 12 kg, 24 kg, 40 kg, 80 kg, 120 kg, 160 kg dough
· large kneading zone for short mixing times
· ideal mixing process for batches of all kinds
· easy to operate
· smooth surfaces, easy to clean
· requires practically no maintenance
· ideal mixing process for programmable time sequence, manual intervention possible at any time
· Optional data memory control with membrane keyboard
· practical bowl cover for dust-free working
· large power reserves, convincing quality assurance
Description:
The DIOSNA Spiral Mixer SP will convince you with its performance in preparing all kinds of dough: from demanding wheatmeal dough via mixed bread dough through to wholemeal dough. Batches of every size, from small batches through to full bowl loads, are mixed with optimum results. | | |
 |
Stirring and Beating Machine RS 40 CS N
made from stainless steel
· suitable for bowls from 16 to 40 l bowl content
· infinitely variable speed regulation
· high speed range (120 to 2600 rpm)
· beater deflection and height of bowl infinitely variable
· bowl lightning
· additional socket
This is progress:
· easy operating computer control for simple programmation of 100 recipes.
· respectively 5 time and 5 rotational speed intervals can be assigned to each program.
· the speed is infinitely variable. A large display shows the actual status of the process at anytime.
These stirring and beating machines have been developed for all users who place high demands on quality when producing different mixtures and want to work very efficiently. These machines have made an excellent reputation for themselves | | |
 |
Universal Mixer
Universal Mixer V 10 - V 200
Mixing, moistening, agglomerating and wet granulating | | |
|
|
|
|
Dinnissen BV
|
|
 |
Conveying equipment and systems
Our product manufacturing and process design activities are carried out in-house, thereby ensuring that we have maximum control of quality and delivery time. This also gives us added flexibility and ensures that we can always deliver on our agreements. | | |
 |
Feeding & Weighing
Filling and weighing Big-Bags and FIBCs in situations which are just a tad more complex? It should be reassuring to know that we already have experience in solving practically any kind of problem that can arise in the food, feed, pharma and chemical sectors. Efficiently and ergonomically. | | |
 |
Milling & Grinding
Grinding to the exact particle structure desired – quickly and efficiently – while minimizing energy consumption, product loss and contamination; mixing solid and liquid ingredients to obtain exactly the right composition, as homogeneously as possible and as flexibly as possible – by switching, combining and varying | | |
 |
Mixing & Processing
Dinnissen mixing systems for a wide range of materials – including powders, granules, and flakes – and for injecting and spraying on liquids have proven themselves in various industries. Our point of departure is always the quality required for the mixed product. | | |
|
|
|
|
Dietz & Rollwa Automation GmbH
|
|
 |
Automatic assembly units with speed-controlled rotating systems for fully-automated final assembly of multipart production items
The high-speed automatic assembly units from Dietz & Rollwa are innovative systems for the
final assembly of multipart production items. They are designed as single-line, modular complete
plants and can be supplied with one or more turntables depending on the requirements of the
particular application. Depending on the requirements and the type of product being handled,
the assembly throughput rate can be set between 350 and 1500 parts per minute | | |
 |
Bunker systems and bulk material conveyors
Bulk goods are usually transported with filler bunkers, bunker conveyors and sloped bunker conveyors.
These systems enable level-controlled filling of sorting devices and need to be specifically adapted
to the production process in order to ensure that the requirements in terms of output volumes
and cycle intervals are satisfied. Dietz & Rollwa supplies standard and special versions for a wide range
of applications.
| | |
 |
connectors
connectors | | |
 |
Feed magazines in many different forms as linear vibration rails, step magazines, conveyor belts or pneumatically driven supply rails
Feed systems ensure that parts are delivered to a process stage in the required quantity and in an
accurately defined position and orientation. We can supply single or multiple line guide rails with a
variety of conveyor technologies - equipped with an integrated jam monitor for a continuous and
steady feed rate, accurately matched to the properties and geometry of the parts being transported | | |
 |
pipe fittings
pipe fittings | | |
 |
Sorting systems in many different guises from slope conveyors, step conveyors and oscillating conveyors to disk sorters
For most applications, oscillating conveyors represent an ideal - and cost-effective - means of delivering
bulk materials in exactly the required manner to the next stage in the production chain. We develop solutions
which are perfectly matched to the particular production task and take into account both the geometry of the
parts being conveyed as well as the required throughput rate. | | |
|
|
|
|
DR. COLLIN GmbH
|
|
 |
Measuring Roll Mills Type M
Instrumented roll mills by COLLIN are indispensable for all processes of development and production control. The high precision of the setting parameters and the high number of integrated measuring equipment allow a reproducible determination of characteristic material data which helps establishing the optimal setting parameters for all production machines.
Available models:
Type W 150 M, Type W 200 M, Type W 250 M
| | |
 |
Strand Pelletizers Type CSG 171/1
Strand Pelletizers Type CSG 171/1
The basic system has one drive for a pre-defined pellet length of approximately 3 mm.
Strand Pelletizers Type CSG 171/2
with two drives.
Two independent, variable drives allow infinite adjustment of the pellet length from 0.8 up to 5 mm.
| | |
 |
table top compounders
table top compounders | | |
 |
table top platen presses
table top platen presses | | |
 |
table top roll mills
table top roll mills | | |
 |
Testing Extruders for Thermoplastic Material
Different processing lengths and screw geometries guarantee a wide area of application. Venting zones, interchangeable grooved bushes, stroke adjustment systems and many more features allow for an extremely versatile application in setting up extrusion lines.
As standard, all extruders are equipped with microprocessor control contained in a swing-out unit above the extruder.
Available models:
Screws Ø in mm: 16/20/25/30/45
Processing lengths in L/D ratio: 10 to 40
| | |
|
|
|
|
Dr. Faulhaber, Fritz, GmbH & Co. KG
|
|
 |
Brushless DC Motors
Brushless motors are electronically commutated and have extremely long operational lifetimes
Consists of a brushless motor with integrated drive electronics
Feedback output available
No cogging
Dynamically balanced for extremely smooth performance
| | |
 |
Coreless DC Micromotors
Coreless rotor means no cogging or preferred rotor position
No iron losses
Extremely low current consumption
Low starting voltage
Low rotor inertia for extremely fast acceleration and braking
Extremely light and compact
Smooth and accurate speed, position, and torque control
Custom systems available from design to production
Higher power to volume than other DC motor technologies
High precision gearboxes available in all sizes
Feedback components available in all sizes
Control electronics available for all motor series
| | |
 |
Encoders
Integrated with the motor
Diameter matching the motor type
Extremely low current consumption
Extremely light and compact
Available in analog and incremental output
Easy to interface
Custom systems available from design to production
| | |
 |
smoovy® Miniature Drive Systems
No cogging or preferred rotor position
No iron losses
Extremely low current consumption
Extremely light and compact
Smooth and accurate speed, position, and torque control
Electronic commutation for extremely long operational lifetime
High precision gearboxes available in all sizes
Control electronics available for all motor series
Available as linear actuator
Custom systems available from design to production
| | |
|
|
|
|
DR. JOHANNES HEIDENHAIN GmbH
|
|
 |
Encoders
Rotary encoders | | |
 |
Gauges
Length gauges | | |
 |
Measuring systems
Length measuring systems | | |
 |
Position Display Units
Position Display Units
Digital Readouts
Position display units serve to visualize the values measured with linear encoders, length gauges, rotary encoders or angle encoders. Areas of application include:
Measuring and inspection equipment
Dividing apparatuses
Monitoring of measuring equipment
Manual machine tools
Measuring machines
Position displays from HEIDENHAIN are designed to be highly user-friendly. Typical characteristics are:
Highly readable, alphanumeric display
Simple, logically arranged keypad
Ergonomically designed push-button keys
Splash-protected front panel
Sturdy die-cast housing
Most position display units feature a data interface for further processing in the higher-level electronics or simply to print out the measured values.
| | |
 |
Position indicators
Position indicators | | |
 |
TNC 320 - The Compact Contouring Control for Milling, Drilling and Boring Machines
Thanks to its flexible operating concept – workshop-oriented programmability with HEIDENHAIN conversational programming or external programming – and its scope of features, it is especially suited for use on universal milling, drilling and boring machines for
series and single-part production
tool and die making
manufacture of machines
research and development
prototype production and testing facilities
repair departments
educational and training institutes
The TFT 15-inch color monitor shows a clear overview of all relevant information for programming, operating and inspecting the machine tool and control such as program blocks, comments and error messages. More information is provided through graphic support during program entry, test run and actual machining.
The selectable split-screen display shows the part program blocks in one half of the screen and the graphics or the status display in the other half.
During the course of the program, status displays will always offer information on tool position, the current program, active cycles and coordinate transformations, and other data. The TNC 320 even shows the current machining time.
| | |
|
|
|
|
Dynamis AB
|
|
 |
Industrial robots for measuring and testing
Industrial robots for measuring and testing | | |
 |
SensActive®.
3D-shape analysis with SensActive®.
Picks unsorted components directly from transport bins, pallets or counters.
Can negotiate both half and whole pallets.
Can even scan directly on a conveyor belt.
Not disturbed by ambient light.
Can analyze complex shapes and is height-independent.
Requires only a 3D-CAD model of the object, which we can help you construct.
Saves space and requires small floor space.
Is noiseless.
Allows advanced pattern laying directly onto pallets thanks to full object control.
Can be installed quickly, even in mobile settings.
Handles most materials, such as steel, plastic, castings and forgings, problem-free. | | |
|
|
|
|
Dyadic International
|
|
 |
dyadics fibrezyme LBL
dyadics fibrezyme LBL improves the efficiency of pulp bleaching | | |
|
|
|
|
DWT GmbH
|
|
 |
Boiler portable pipe beveling
BABCOCK has developed portable pipe beveling machines with the know-how of their own people on-site. DWT GmbH in Essen, Germany is the license manufacturer of Babcock portable pipe bevelers for weld preparation and orbital welding of pipes or boiler tubes as well as panel walls and delivers a unique product range worldwide | | |
 |
Handheld tyre inflator digital and precise
The ACCURA Unit is a robust yet sophisticated handheld electronic tyre inflator designed to break the mould of existing handheld tyre inflation. With leading electronics and sensor technology as well as patented software algorithms it offers fast, accurate and trouble-free tyre inflation and deflation.
- driven by the simplicity of use and clear display - fast inflation and deflation rates - high levels of speed, accuracy and safety - long product life - flexible usage - individual testing, exceeds EC Directive 86/217 Technical features: - Robust electronic design - Ceramic sensor - Clear and easy to read digital display - Modern, lightweight and shock resistant construction - Proprietary software increasing accuracy, fine metering and eliminating the chance of false readings - Direct valve design increasing inflation and deflation rates -Individually tested and certified
Also the AIRFORCE dial unit is designed for fast inflation and deflation rates and long product life - flexible usage - individual testing, exceeds EC Directive 86/217
Technical features: Clear and easy to read dial display - Modern, lightweight and shock resistant construction - Direct valve design increasing inflation and deflation rates -Individually tested and certified
| | |
|
|
|
|
DÜRR ECOCLEAN GmbH
|
|
 |
Cleaning
offers needs-based standard solutions and tailor-made systems for cleaning and burring work pieces, thereby covering the needs of the automotive industry, its suppliers and the diversified industrial market. | | |
 |
Industrial Fluid Filtration
offers the latest filter systems for the reliable, environmentally friendly and efficient processing and reconditioning of cooling lubricants and industrial liquids.
| | |
 |
Perfectly automated and interlinked processes
develops and produces systems fit for the future ensuring the flexible handling of work pieces. And more than that, this company division uses coordinated solutions to provide a smooth material flow and optimum interlinking of individual process steps in manufacturing.
| | |
|
|
|
|
Durocas GmbH
|
|
 |
filter tubes
filter tubes | | |
 |
assembly work
assembly work | | |
 |
filter cloths
filter cloths | | |
 |
filter elements
filter elements | | |
 |
industrial nonwovens
industrial nonwovens | | |
|
|
|
|
DURFERRIT GmbH
|
|
 |
Salt bath technology
Durferrit salts are used as salt melts within a temperature range of 150°C to 1300°C:
The extremely high heat storage capacity and the heat transfer properties of salt melts are used to good effect for the transfer of heat in chemical reactors in the chemical and rubber processing industries. These chemical reactors contain up to several 100 tons of salt.
In the rubber processing industries rubber profiles, among other products, are vulcanized in continuously operating plants.
Vulcanizing plant | | |
|
|
|
|
Durbal Vertriebsgesellschaft GmbH
|
|
 |
accessories
accessories | | |
 |
heavy-duty rod ends
heavy-duty rod ends | | |
|
|
|
|
Duravit AG
|
|
 |
bathtubs
bathtubs | | |
 |
bathroom furniture
bathroom furniture | | |
 |
lavatory bowls
lavatory bowls | | |
|
|
|
|
DuPont Performance Coatings GmbH & Co. KG
|
|
 |
Coresheet Varnishes.
The family of VOLTATEX® products offers a comprehensive range of core sheet varnishes with well defined characterictics
| | |
 |
Impregnating Resins
Impregnating Resins | | |
 |
Wire Enamels
Wire enamels from DuPont™ Herberts® Electro cover the complete spectrum of product requirements.
| | |
|
|
|
|
DUO PLAST AG
|
|
 |
Packaging materials
Cover sheets
Film packaging machines
Film packagings
Packaging films
Packaging materials
Packaging technology
Strapping machines | | |
|
|
|
|
Dulevo International S.p.a
|
|
 |
Street sweeper
5000 evolution
An efficient method of cleaning town and city centres, airports, docks and large industrial complexes that make an essential part of maintaining our environment. To realise this aim efficiently, a special type of cleaning system is necessary to deal with the many problems encountered.
| | |
 |
Street vacuum sweeper
COMMANDO
The Dulevo COMMANDO is a small-sized suction sweeper, which is particularly suited for working environments where the need for high productivity is combined with a requirement for enhanced maneuverability in tight spaces. The Commando%u2019s exceptionally high quality sweeping efficiency is achieved because of improved performance from a combination of innovations, the sweeping speed reaching 12 km/h, the larger than expected waste hopper volume, the extremely powerful suction turbine and the laterally moving rear sweeping unit. In order to satisfy the widest range of requirements, the Dulevo COMMANDO is available in the EURO 3 diesel version
| | |
 |
Street washing and disinfecting equipment
The DULEVO 200 and 5000 Hydro are machines particularly studied for high pressure washing and disinfecting of road surfaces and dealing with the many problems encountered in towns, city centres and large industrial complexes where hygiene is required.
The compact dimensions of these machines, plus a special four wheel steering system make these machines unique in their category, both in working autonomy as in manoeuvrability
Washing is made through a front spray bar positioned under the front part of the cabin, this can be adjusted hydraulically in angle of incidence, side angle, ground height.
The spray bar is built in stainless steel and is equipped with eleven vertical cone type spray units for frontal work and by two side units for working both on the left or right hand side of the machine.
Water is sent to the spray bar through a high water flow volumetric piston pump with pressure that can be regulated by a valve easily accessible and adjustable.
The water is withdrawn and filtered through a cartridge filter (with easy access for maintenance) from a stainless steel water tank placed on the rear part of the machine. | | |
 |
Waste compactor
This machine is manufactured on a Dulevo custom built four wheel steering chassis and has been designed and engineered to sustain a regular heavy work load. The 5000 Compatto is a unique machine for the collection, compacting and transportation of municipal solid waste. It can be use to load and compress waste, tip and empty trash bins and/or skips and quickly empty the vehicle's body into other trash compacters. The limited dimensions of the vehicle, together with the special four-wheel steering system allow a turning radius of less than 4.5 meters. This gives the vehicle unparalleled maneuverability making it ideally suited for use in congested the town centers. | | |
|
|
|
|
Düsterloh Fluidtechnik GmbH
|
|
 |
hydraulic and pneumatic drive systems
in the world of hydraulic and pneumatic drive systems -
the business field of DÜSTERLOH Fluidtechnik GmbH
| | |
|
|
|
|
DUCON TECHNOLOGIES INC.
|
|
 |
Activated carbon air filter
Activated Carbon Filter
Ducon Carbon Absorbers are custom designed to remove odor-causing components such as hydrogen sulfide, mercaptans, organic acids, aldeheydes, and ketones in various industrial and municipal applications. Single bed units are available for capacities up to 10,000 acfm. Dual bed units are utilized for higher capacities
| | |
 |
VOC ( volatile organic compound) treatment system
VOC Control Systems
Ducon supplies a complete line of VOC emissions control and solvent recovery systems. Ducon specializes in Activated Carbon DUVOC Adsorption Systems to remove/recover organic compounds and exhausts from chemical processing, coating, printing, electronics, metal cleaning and other operations.
Ducon offers modular systems from 500 CFM to 500,000 CFM. Ducon's CACR type and CASR type DUVOC systems are used to remove/recover the following compounds:
Benzene, Toluene, Xylene, Ketones, Alcohols, Phenols, Aliphatic, Aromatic and Halogenated organic Compounds, Esters, and other organics.
For highly concentrated streams Ducon provides catalyst based incineration systems. Please consult a Ducon engineer for your particular requirement.
| | |
 |
Wet and dry electrostatic precipitator
Wet Electrostatic Precipitators
Designed to achieve zero opacity and over 99.9% removal efficiency on particles down to 0.01 micron in size with 0.5 w.c. pressure drop.
Ducon also provides condensing type units for control of metal oxides.
| | |
 |
Wet scrubber
Dynamic Wet Scrubbers
TYPE UW-4 This Ducon Patented UW-4
Scrubber is a maintenance free unit, complete with integral wet fan, achieving high efficiency with medium pressure drop in applications involving heavy dust loads, and abrasive materials.
Applications:
Pulp &, Paper; Kraft Process
Black Liquor Recovery Boilers
Dissolving Tanks
Lime Kilns, Shakers & hydrators
Bark & Auxiliary Boilers
Evaporation Vents
Lime Sludge Kilns
Ore Dryers
Carbon Black Plants
Dyes Manufacture
Fertilizer Plants
Limestone Plants
| | |
|
|
|
|
Duall Division
|
|
 |
Dust collector
Dust collector
| | |
 |
Fume and gas wet scrubber
Fume and gas wet scrubber
| | |
 |
Odor scrubbing system
Odor scrubbing system
| | |
 |
Oil mist eliminator
Oil mist eliminator
| | |
|
|
|
|
Dropsa Spa
|
|
 |
Air /oil lubrication unit for spindle
Oil lubrication is a relatively new emergent lubrication system. The recent developments in lubricant technology have expanded air/oil lubrication to dry machining applications.
The air stream, that normally operates continuously, provides both a transport for the oil to the lubrication point and cooling.
The oil-injected into the air stream at regular intervals coats the surfaces to be lubricated and reduces friction and wear.
Dropsa offers many articulated solutions to Air/Oil Lubrication - the VIP4 Family of products is the latest addiction to this range. | | |
 |
Dry machining and tool lubrication unit
Used in a large range of application, total loss oil lubrication involves creating a thin oil-film between moving parts which is renewed at regular intervals by an automated lubrication system.
Dropsa has developed a wide range of standard electric, pneumatic and hydraulic pump packages suitable for oil loss systems. A custom service design is available to tailor pump packages to specific customer applications.
| | |
 |
Electric oil/grease lubrication pump Dropsa
Dropsa has developed a wide range of standard electric, pneumatic and hydraulic pump packages suitable for oil loss systems. A custom service design is available to tailor pump packages to specific customer applications.
| | |
 |
Pneumatic grease pump
wide field of application ranging from small machines such as woodworking machinery to large heavy industry such as steel plants or paper mills.
Dropsa provides an extensive line of equipment for grease lubrication and system monitoring. The most popular systems used for grease lubrication are Dual Line and Progressive Divider.
The modular design pioneered by Dropsa allows easy configuration and expandability of the system. Active components can be substituted during maintenance without the need to disrupt the interconnecting pipe-work. | | |
|
|
|
|
DREISTERN GmbH & Co. KG
|
|
 |
Cut-off machine
High performance cut-off units
You will obtain from us the most suitable cut-off units according to the profile or tubing form, material and line speeds.
Special merits: Outstanding cut-off quality and high cutting speeds. | | |
 |
Roll forming machine for medium size to heavy profiles
The P3 series has a eminant reputation among DREISTERN customers. The five models in the P3 series offer outstanding cost-effectiveness. Thanks to the numerous equipment variations, the right solution can be found for each requirement. According to the tooling changeover frequency, a suitable quick changeover system is put into action. | | |
 |
Roll forming machine for open profiles
The P3 series has a eminant reputation among DREISTERN customers. The five models in the P3 series offer outstanding cost-effectiveness. Thanks to the numerous equipment variations, the right solution can be found for each requirement. According to the tooling changeover frequency, a suitable quick changeover system is put into action. | | |
 |
Roll forming machine for thin-walled precision profiles
Frequent profile changeovers while maintaining the same high profile quality?
This is no problem for a P60/90. Thanks to a compact quick-change stand system, a tooling change can be carried out quickly. A precisely adjusted tooling stand is available for each particular profile. The advantage: No adjustments need to be carried out after tooling change. This type of machine is particularly popular with foam-filled roller shutter manufacturers, who appreciate the same high quality offered by this machine - even for difficult profile forms. | | |
|
|
|
|
Dr. MÜLLER DIAMANTMETALL AG
|
|
 |
Diamond and CBN grinding wheels
Diamond and CBN grinding wheels | | |
 |
Diamond and CBN internal grinding wheels
Diamond and CBN internal grinding wheels | | |
 |
Diamond and CBN tools for the wood and plastic processing industry
tools for the wood and plastic processing industry | | |
|
|
|
|
Dienst Verpackungstechnik GmbH
|
|
 |
3-Flap-Closer Closing machine for Top-Load folded boxes
Sequence of operation
Filled boxes arrive either continuously or randomly and are automatically timed into the machine, using servo driven infeed devices. After application of adhesive, the top and front flaps are ploughed down using a series of fixed guides. After the carton is turned through 90°, using an adjustable turning device, the side flaps are applied with adhesive, ploughed and closed. Optional coding and labelling machines can be integrated.
Design
All drives and eletronic control components are installed inside a watertight, closed cabinet.
Modular servo drives with adjustable continuous speed regulation.
Features
electronically synchronized servo systems
touch screen control panel with format memory
visualization of operation mode
light barrier style guards
quick repeatable operator size changeovers using a series of hand wheels and digital counters
hygienic balcony style construction; 3-shift engineered
| | |
 |
Blank erecting machinery
Sequence of operation
Using a vacuum head, blanks are extracted from the magazine, applied with adhesive and transported to the forming area. A servo driven plunger then forms the tray/carton through either a fixed or adjustable female forming tool. Finished boxes are discharged onto a conveyor.
Design and features:
Machine design and features achieve the latest stage of technology regarding:
speed up to 60 cycles/min. each head
modular servo technology
quick repeatable operator size changes
easy removable tooling | | |
 |
Horizontal cartoner machine HK L
HK-L: Standard machine for food and non-food industries
Sequence of operation:
Cartons are extracted from the magazine, using a rotary pick off head and placed into the moving carton transport chain. Product is then loaded into the carton, using a barrel loading device and the carton is then closed, using a series of reciprocating flap kickers and fixed guides.
| | |
 |
Horizontal cartoning machine HK III-ICS
HK III-ICS: Horizontal cartoner with integrated Individual Carrier System
Functional sequence
Cartons are extracted from the magazine, using a rotary pick off head and placed into the moving carton transport chain. Product arriving from the integrated ICS system, is then loaded into the carton automatically, using a barrel loading device and the carton is then closed, using a series of reciprocating flap kickers and fixed guides
| | |
 |
Horizontal sleeving machine with sidewise insertion
Top model HS-IV-S with integrated servo technology
Applications:
High performance sleeving machine for product banding with solid board blanks. A top-class sleever performing its working mode with product located on/over blank.
Possible closing techniques:
All required closing techniques are possible. With individual formation and combination of glue application systems and necessary folding devices, all closing techniques may be realized.
Sequence of operation with operation mode product on/over blank
Sleeves are extracted from the magazine using a rotary pick off head and placed into the moving carton chain. Product is then placed on/over the flat blank. Charged sleeves are (multi-)folded and closed using glue. Additional fixation of sleeve and product is possible.
Design and features
Rack and user concept:
technical components are located in the upper third, above products
in-line transportation of products for optimized accessibility
ergonomic cantilevered GMP design
quick repeatable format changes, using hand wheels and digital counters
Drive mechanism:
modular operations
modular servo drive
continuous malfunction diagnosis and integrated system monitoring
automatical adjustment of transport chain
Industrial hygiene and ergonomics:
stainless steel frame and shafts
"Gullwing"style machine guards with assisted opening
movable MMI panel including coloured 10“ touch screen
Optional extras:
range of product auto feeds
configuration of several folding- and gluing stations for various requirements
additional in-feed and insertion devices
option to adopt specific customer specifications
coding- and control devices | | |
 |
Whether cereal bars, bottles or pizza - we pack it
There is not much of consumable articles in the range of food or non-food, which is not packable with Dienst technology. By using modern work equipment,such as 3D construction, an own CNC-manufacture and a specialized software development - we may realize exceptionally packaging solutions.
Pls. got to
category "applications" showing a selection of practicable application samples.
for samples of folded boxes, which may be processed with DIENST machinery, pls. click here.
Vertical range of manufacture at DIENST averages 95 %. This enables us, to offer maximized flexibility and quick service to our customers.
| | |
|
|
|
|
Diemme S.P.A
|
|
 |
Filter press AUTOMAT
Thanks to its dewatering power and flexible operation, the DIEMME AUTOMAT filter press achieves the best filtration results in all applications and industries.
Plate pack closing device
- Highly-reliable plate pack opening and closing operations
- Use of standard components
- Simple maintenance procedures
High pressure cloth washing (DIEMME patent)
- Specially-designed device to perform the most efficent and effective cloth washing at the highest level of automation
Plate shifting
- As fast as four seconds for each plate shifting, executed by means of an inverter with speed adjusted by the operator
- Fully-automatic functioning.
- Highly- reliable handing of each plate
Plates lifting hoist
- Simple maintenance procedures
Photocell safety curtain
- Use of the most modern and advanced systems for operator protection and safety
| | |
 |
Filter press GHS
The GHT 4x4 is a filter press with high productivity. The filter plates, which are hung from the upper beam, are moved automatically by a rapid shifting device equipped with a carousel system which reduces the filter press opening and closing sequence to the minimum. Four hydraulic cylinders placed on the plate pack corners ensure perfect operation and limited structural stress, even in the most unfavourable working conditions. Effectively guarded moving parts and the use of state-of-the-art electronic interlock systems mean that the GHT 4x4 conforms to the highest operator health and safety regulations. Routine maintenance operations are simple, thanks to easy access to the filter plates, both for inspection and for filter cloth replacement.
Fixed header – 4 cylinders: the fixed header is made of a stainless steel “cellular” structure in order to best resist stress and it supports four (4) hydraulic jacks which are responsible for holding the plate pack closed.
Automatic cloth washing system: successful cloth cleaning using a robotic device ensures that optimum filtration rates are maintained.
Protection of the shifting device: The plate shifting mechanism, located inside the upper beam, is effectively protected from sludge, dust and corrosive chemicals by a continuous belt of rubber-lined cloth.
Anti-releasing device: the unique anti-releasing device prevents the simultaneous and premature plate pack release during the filter press opening and it allows a perfect and sequential cake discharge.
Carousel type plate shifting: the carousel plate shifting device assures quick and sequential plate movement by means of an automatic transport system controlled by an inverter.
Laser: a laser control system ensures correct plate pack alignment and stops the filter press in case of any anomaly so that any damage can be avoided.
Mobile hoist: a mobile hoist is provided to reduce downtime in the rare event of plate removal.
Optional open-filtrate-discharge plate pack: this is an alternative solution to the standard closed-filtrate-discharge system. It allows the visual monitoring of the filtrate quality through plates with external drainage ports equipped with cocks. The filtrate discharge from each plate is collected in a launder installed at the side of the plate pack running longitudinally.
| | |
 |
Filter press JETFILTER
The JETFILTER structure is an overhead beam type and its small size facilitates its installation in small rooms or in existing plants. JETFILTER is a new concept in filter press design that outperforms all conventional filtration systems.
The innovative product injection technology, together with the unique, integrated system of cake discharge and cloth washing, allow the JETFILTER to dewater any kind of suspension very quickly. JETFILTER is fully automatic and can work 24 hours a day continuously without the operator’s presence, even when feeding viscous products resulting in very adhesive cakes which are normally difficult to discharge.
Compared to the traditional automatic filter presses, the JET FILTER hourly output is about 4 times higher. The technology implemented in this model, as well as reducing the cycle time, also minimizes the use of chemical filtration aids and consequently, cuts plant operating costs considerably
“Plate-by-plate” feed
A series of injectors puts the product in every single filtration chamber simultaneously. The injection, which is made tangentially, allows fast and homogeneous filling and high filtration speed, even with very abrasive products.
Discharging device
The discharging device is located on the lower side of each plate and is comprised of a series of washing bars. Thanks to the extremely precise design, the washing bars are able to detach the cake without smearing it on the cloths. In this way, even the most adhesive products can be discharged successfully.
Automatic cloth washing
The automatic cloth washing system is comprised of a series of nozzles attached to the discharging device and allows the cloths to be washed simultaneously, at the end of every cycle. In this way it is possible to guarantee consistent filtration rates, cycle after cycle.
Distribution system
The distribution system controls the flow of wash water to the cloth washing system by means of automatic valves located adjacent to each plate. In this way it is possible to optimize wash water consumption.
Simultaneous plate shifting
The simultaneous plate shifting system guarantees immediate and simultaneous plate pack opening and minimum idle time during the filtration cycle.
Spare cloths
A complete set of spare cloths is pre-installed on the machine
| | |
 |
Filter press KE
ME is a lateral beam filter press, extremely versatile, which can be customized in function of the applicative process and clients' needs. The filter press ME is full automatic, with short cycles and minimum idle times. Thanks to the simultaneous opening system of the plates pack the cake's release is the extremely quick. ME series offers both big and small models. The latter ones are the smallest filters in the world equipped with an integral automation.
Instantaneous release device: it manages the discharge operation of the cake, considerably reducing the work times through a rapid opening of the plates pack.
Automatic low pressure cloths washing: a close net of nozzles placed on the plates pack sprinkles the cloths with water, eliminating dust and cake's superficial residues.
Automatic high pressure cloths washing: a mechanic robotised arm equipped with nozzles cleans the cloths through high pressure water jets perpendicularly directed on the cloth surface.This action guarantees a profound and effective cleaning of the cloths, and consequently constant filtration output in the time.
Protection bellows of hydraulic jack: The piston of the hydraulic jack is protected against dust and liquids by a clothy-rubber bellows which ensures a total protection against corrosive processes.
Shaking plate device: an eccentric mechanism shakes the plates eliminating possible residues of cake away from them and so obtaining an effective solid release phase.
Aspiration hood: it conveys the vapours generated by the filtration of noxious products far from the operator's field of action, completely isolating the filter from the surrounding environment | | |
 |
GHS filter press
The new GHS filter press has a strong and elegant design. Its refined push to close type upper beam structure ensures a better functional reliability in all working conditions making the access to the filter plates much easier. GHS is an automatic filter press where the plates, which are hung from the upper beam, are moved automatically by a rapid shifting device equipped with a carousel system which reduces the filter press opening and closing sequence to the minimum.
Automatic cloth washing system
Successful cloth cleaning using a robotic device ensures that optimum filtration rates are maintained.
Protection of the shifting device
The plate shifting mechanism, located inside the upper beam, is effectively protected from sludge, dust and corrosive chemicals by a continuous belt of rubber-lined cloth.
Anti-releasing device
The unique anti-releasing device prevents the simultaneous and premature plate pack release during the filter press opening and it allows a perfect and sequential cake discharge.
Carousel type plate shifting
The carousel plate shifting device assures quick and sequential plate movement by means of an automatic transport system controlled by an inverter.
Laser
A laser control system ensures correct plate pack alignment and stops the filter press in case of any anomaly so that any damage can be avoided.
Mobile hoist
A mobile hoist is provided to reduce downtime in the rare event of plate removal
| | |
 |
Sludge & Slurry dewatering plants
Installations for sludge dewatering
The dewatering phases in municipal processes are basically of biological sludge originated from purification processes. DIEMME Filtration has realized many complete installations of sludge purification regarding the processes of water purification, purification of waste waters and SUW (solid urban waste) treatment.
Water purification: production of potable water – sludge dewatering
In most cases, water provided to end users, given their high demand, comes from lakes (both natural and artificial), rivers and underground aquifers.
In order for it to become drinkable (potable), water is subject to a variety of processes commonly including chemical-physical treatment.
Chemical-physical treatment produces sludge as a by-product, which is dewatered using filter presses, to reduce the volume for disposal and recover additional water.
Purification of waste waters – sludge dewatering
Water used in human activities (domestic and municipal waste water) is collected by underground drainage systems (sewers) and directed to centralised plants for treatment in order to allow it to be safely discharged to the environment (or recycled). In these centralised plants, biological processes are harnessed to treat the waste water. A by-product of these processes is sludge with varying qualities, depending on the particular process. Filter presses are commonly used to dewater the sludge, thus reducing the volume and minimising the cost of disposal (or increasing the options for recycling).
Industrial waste water treatment also produces sludge as a by-product of the purification process. This sludge needs to be dewatered in order to make disposal both safe and economic. In this dewatering phase, filter presses are used extensively.
SUW (solid urban wastes) treatment – sludge dewatering
Solid wastes (domestic and industrial) are collected and brought to special sites where they are either buried in landfills or incinerated.
In the first case, filter presses are used for dewatering sludge produced from the treatment of contaminated drainage water emanating from the landfill. In the second case, filter presses are used to dewater the slurry produced by “scrubbing” the flue gas from incinerators to minimise air pollution.
| | |
|
|
|
|
Dörries Scharmann Technologie GmbH
|
|
 |
CONTUMAT - VC - V
The VC-V series extends the double column design with an additional y-axis (3rd. linear axis) with a cast iron bed and hydrostatic guided base with main drive. | | |
 |
CONTUMAT - VCE
The single column type is a compact vibration-damped cast iron design with constant temperature distribution by a symmetrical gear and frame design. | | |
 |
ECOCUT
One of the highlights of the ECOCUT line is flexibility for different applications. According to this the ECOCUT can be equipped with a wide variety of different attachments. | | |
 |
FOGS
The FOGS line provides a new dimension in high speed milling especially for the tool and die industry. | | |
 |
RVU
The new RVU-grinding machine generation sets the pace in high-precision machining. It guarantees to provide a sustainable competitive edge. In the grinding sector, the product-line is especially suitable for high-precision machining in industries as e.g. bearing industry or aerospace sector, where extreme high accuracy are the basic demands | | |
 |
TVM
The TVM range of vertical lathes has been designed to attain maximum productivity in the machining of smaller high quality products. | | |
|
|
|
|
Döhler GmbH
|
|
 |
Beverage & dairy bases
Working closely with our partner company ALKO International B.V., the DöhlerGroup offers innovative ingredients for the beverage and dairy industry.
These include milk and cream based building blocks for cream liqueurs (e.g. chocolate or creamy fruit liqueurs) as well as milk, cream, yoghurt and soya bases for use in sophisticated recipes for non-alcoholic beverages such as smoothies. The latest ALKO technologies permit the permanently stable incorporation of milk, cream, yoghurt or soya into drinks of all kinds, providing consumers with a whole new taste experience.
Cream liqueur bases
Milk and cream bases
Yoghurt bases
Soya bases | | |
 |
Flavour solutions – the world of flavours
Flavour solutions – the world of flavours
The DöhlerGroup is your ideal partner for the world of flavours. Thanks to vertical integration and a deep raw-materials expertise, the DöhlerGroup has special and unique flavours such as citrus extracts and FTNF/FTNJ add-back flavours. Completing the range are natural flavours and flavours as well as extracts and specialities.
Matching an extremely high degree of creativity and experience with a thorough understanding of your production process guarantees the performance of the specially tailored flavour to your precise specification in the finished product!
Your flavour will be developed in close cooperation with our Market Research, Sensory Science and R&D departments.
| | |
 |
Fruit juice concentrates
Fruit juice concentrates – for Döhler, nature gives of its best
To be successful in high fruit content beverages demands a truly worldwide presence with global access to the very best raw materials. Working closely with its class leading partners the DöhlerGroup connects the world’s best raw material growing areas with state of the art, environmentally compatible production technology. Add to this industry best logistics and the customer has outstanding juice quality available on time whenever and wherever it’s required.
For us, quality starts with fruit cultivation. Döhler employees, with vast local experience, are on the spot to ensure that only the finest fruit is reserved for Döhler products and processed to our exacting specification. The result is top grade fruit juice and vegetable juice concentrates and purées of a consistently high quality unaffected by harvest variability.
The Oosterhout production site in the Netherlands is our centre of excellence for Döhler’s entire range of citrus and exotic fruits. From single fruit blends to standardised multifruit blends, from orange, grapefruit and pineapple to mango and papaya right through to the tropical umbu – Oosterhout produces the goods.
At our Dinter subsidiary in Neuenkirchen native fruits such as apples, pears, raspberries, red and black currants and cherries are processed to create specific products. Juice concentrates and natural juice flavours for juices and fruit splashes being the areas of core competence. All freshly picked fruit is processed immediately on arrival, essential to ensure best quality, exceptionally fruity, drinks.
| | |
|
|
|
|
Davik Self-Adhesive Tapes
|
|
 |
Double-Sided Tapes
DS 4101 - Double-Sided BOPP
Description:
BOPP carrier coated with high grade hot-melt pressure sensitive adhesive. Bi-siliconized paper interliner.
Features:
High adhesion. Excellent ageing.
Application:
Splicing. Lamination of difficult-to-stick surfaces. General purpose.
| | |
 |
Frontal DiaperTape
FT 922 - BOPP Frontal Diaper Tape
Description:
Printed smooth BOPP carrier. Hot-melt pressure sensitive adhesive. Good adhesion to polyethylene and non-woven fabric. Uniform release value.
Application:
Frontal part of closure system for disposable diapers.
| | |
 |
General Applications
CP 310 - Masking Tape
Description:
Crepe paper carrier. Low adhesion, pressure-sensitive adhesive.
Features:
Waterproof, excellent ageing.
Application:
General papers house hold and office uses.
| | |
 |
PrestoPrint - printable tapes
PrestoPrint - PP820 PP840 PP841 PP860 PP870 PP850
Description:
BOPP carrier coated with high grade, hot-melt, and pressure sensitive
adhesive. Pre-treated backing.
Features:
Printable under a wide range of conditions. Waterproof, high tack and
excellent ageing.
Applications:
One-step surface printing on commercially available adhesive tape
flexographic printing machines. Manual/automatic carton sealing
| | |
 |
Security Tapes
Security in Packaging: A Critical Concern in Today’s World
Packaging security ranks high among the pressing issues that stand before us today. Today’s packaging theft and counterfeit figures are staggering: the International Anti-Counterfeiting Coalition estimates that worldwide, annual retail loss runs in excess of $250 billion.
The Answer: Cutting-Edge Tamper Evident Security Tapes
Eliminate the worry over customers receiving bogus goods or no goods at all by using reliable, lab-tested, cutting-edge security tamper evident and authentication tapes that literally sign and seal shipments, produced by Davik's security tape division.
Davik is a cutting-edge manufacturer of security self-adhesive tapes, using different advanced technologies in order to develop reliable security tapes capable of signaling and/or identifying fraudulent products, including:
• The world’s first chipless RFID tape with (MR) Magnetic Resonance
applications
• The world’s first Optical Authentication Tape with distance reading
capabilities
• The world’s first patented, high quality Hot-Melt Tamper Evident Tape
with true box sealing capabilities, keeping boxes sealed and contents
safe
| | |
 |
Special Applications
LPT 9220 - Label Protection Tape
Description:
BOPP carrier coated with high grade Hot-Melt Pressure Sensitive Adhesive. High transparency.
Application:
For label cover and protection against mechanical and chemical damage.
| | |
|
|
|
|
DATRON-Electronic GmbH
|
|
 |
DATRON CNC Machining Centre
Productive and economical machining!
Datron’s affordable high-speed micro CNC machining centers are designed to reduce cycle time while improving your product quality, and your flexibility.
Heavy duty industrial construction, intuitive control, high-speed spindles, high-speed tooling, and a compact footprint make the Datron machining centers the ideal machines for a variety of applications. German engineered high-speed machining technology, together with our uncompromising attitude towards customer service, provides you with the edge to stay ahead of your competitors.
| | |
|
|
|
|
DATAPIXEL
|
|
| |
