|
|
|
Cyklop GmbH Transportgutsicherungs-Systeme
|
|
 |
Ampag 36 Transit strapping machine
System-independent strapping machine for the secure and reliable strapping of newspaper bundles and magazines. Normal and cross strapping on one machine.
Special customer benefit:
• Availability > 99% due to very high production accuracy
• Minimal maintenance and life cycle costs due to maintenance-free
assemblies and a closing unit with dustproof enclosure
• Investment in the future due to modular machinery design. Options
which can be retrofitted at any time.
• Optimum return tensioning force for different package heights due to precision package height measurement
• Convenient, easy-to-understand operation due to plain text
display with symbol guidance
| | |
 |
CLT 100 Handtool
The battery-driven, semi-automatic hand tool.
For general application with light packages. The battery-driven hand tool is very comfortable – one-handed operation is possible - and processes different strap widths and thicknesses. The valuable friction seal and fully automatic sealing mode guarantee efficient and professional strapping cycles, even without a specialist.
• Fast and easy strapping: 1 button for 3 functions (tensioning, sealing and cutting off)
• Simple insertion – strap on strap, without lever
• Simple pre-selection: Strap tensioning and welding time within seconds per potentiometer
| | |
 |
Cyklop PET Strap Premium
Cyklop - PET - Premium - the first choice!
not only better for many applications, but also more economic than Cyklop Classic:
• Best quality raw material
• Greater elasticity / mm2
• Tensile strength up to 550 N/mm2
• Lower strap cross section, less material consumption per
strapping cycle thus environmentally friendly
• Significant savings on transport and storage costs
• Optimum retention
Cyklop Premium has a tensile strength of 550 N/mm2. Through low strap cross section Cyklop Premium has a higher elasticity which results in optimum retention. Cyklop Premium is ideal for heavy-duty strapping applications - with the same economic efficiency!
| | |
 |
per straps
per straps | | |
 |
Semi-automatic machines > M-PAC 3
As universal as a hand tool, irrespective of package size
If the daily package volume is only limited, the M-PAC 3 can be considered
• For straps 5 – 15.5 mm wide, adjustable
• 10 to 20 strappings/min
• Mobile, with lockable castors
• Irrespective of package size
• Working height adjustable
• Energy-saving stand-by mode
| | |
 |
Steel strapping
Sometimes simply better.
Steel strapping is the classic method of securing loads – and despite the numerous advantages of plastic strap it is sometimes the better solution, even today. For example, when strapping very heavy loads or if the items have particularly sharp edges which might possibly damage a plastic strap.
Consequently, the question of 'plastic or steel' cannot be answered in general terms but only with careful examination of the applications in operations.
In the case of loads where circumference tends to decrease steel straps are not to be recommended though: Owing to their low elasticity they are unable to restore their original length – tensioning force declines considerably or even disappears completely.
Cyklop supplies steel straps in widths from 9 to 32 mm, plus a comprehensive range of strapping devices: From the simple manual tensioning tool to the convenient automatic strapping machine nothing is left to be desired in terms of customers' requirements.
| | |
 |
Steel strapping Handtools CH 45
Pneumatic tensioning and closing for straight-surfaced packages.
| | |
 |
Steel strapping > Machines > AF/AP 111
The AF / AP 111 M series
Operation:
The load is conveyed to the required strapping position. The automatic strapping process is started. The strap is guided round in the strap guide and stretched round the load at an optimised tension, then sealed and cut off. The procedure is repeated for each load, depending on the number of strapping cycles. The strapping head is located on top of the package.
AF/AP 111 MVB
Only the strapping head is lowered to the package height. The difference in height between the highest and the lowest load can be a maximum of 550 mm.
AF/AP 111 MKB
Not just the strapping head lowers onto the pallet load but the entire upper strap guide frame. Strapping can be performed even if pallet height is only 300 mm or less.
Main advantages:
• Compact, minimal space required
• Easy access to all mechanical components,
to facilitate service and maintenance
• Fast and economical to manufacture
• High strap tension, up to 7 KN
• Modular adaptation to type and size of package
• Strapping head service-friendly
• Easy to integrate into existing conveyor lines. Adjustable in height
• No need for a base. Minimal space required.
• Fully electric, 3-ph. + N or electric/hydraulic
• All the machine functions are electronically program controlled, with plain text display
• The modules are manufactured in series, each to the same specifications and with the
same precision
• The results are high reliability and minimised servicing
| | |
|
|
|
|
CLEPA
|
|
 |
CLEPA is the European umbrella membership organisation for the global Automotive Supply Industry
CLEPA is the European umbrella membership organisation representing the interests of the global automotive supply industry. 75 of the world's most prominent suppliers for car parts, systems and modules and 27 National trade associations and European sectoral associations are members of CLEPA, representing more than 3,000 companies, employing more than three million people and covering all products and services within the automotive supply chain. Based in Brussels, Belgium, CLEPA is recognized as the natural discussion partner by the European Institutions, United Nations and fellow associations (ACEA, JAMA, MEMA, etc).
| | |
|
|
|
|
Cleveland Präzisions Systeme GmbH
|
|
 |
Components & systems for linear motion
We supply Rail Sets, Cross Roller and Needle Roller Bearing Slides, Ball Bushing and Dovetail Slides as well as other Guideways for the mechanical engineering, measuring, automotive, aircraft, electronics and medical technology industries to mention only a few. We can also provide complete custom-made systems with drives and CNC.
Project planning of complete systems
Designing of linear elements according to application, environment, load and forces
Planning of drive components and combination, parameterisation and start-up with control | | |
 |
Machine Grinding Technology
Machine Grinding Technology | | |
 |
Screw Jacks
The jobs that worm gear screw jacks are expected to do are varied as their applications: lifting, lowering, tipping or moving. In each case, the different industry sectors and parameters require a powerful, reliable screw jack that is easy to adapt to the specific application, and to extend to a complete worm gear screw jack system.
The MULI®, JUMBO® worm gear screw jack product range stands for reliability in use and versatility in application. Technically matured and with its easy-to-mount cubic case it can be easily extended to form complete screw jack systems together with the wide range of accessories.
| | |
|
|
|
|
CLEVERTECH S.R.L.
|
|
 |
Automatic storage system for pallets
Automatic storage system for pallets | | |
 |
Empty/filled glass jars palletising/depalletising lines
Empty/filled glass jars palletising/depalletising lines | | |
 |
Lock and key making machine
Lock and key making machine
| | |
 |
Magnetic head pusher palletisers for empty cans
Magnetic head pusher palletisers for empty cans | | |
 |
Packs handling and palletising lines
Packs handling and palletising lines | | |
 |
Pallets conveying lines
Pallets conveying lines | | |
|
|
|
|
Clyde Material Handling Ltd
|
|
 |
Dense Phase Pneumatic Conveying - PD Pump
The PD Pump is a batch transfer vessel developed for maximum economy. The solution utilises small bore pipelines operating at low conveying pressures with reduced air flow and power consumption.
Highly efficient conveying allows transfer rates of up to 75t/hr over conveying distances of 500 metres or more, making this system particularly suitable for transfer of dry, fluidisable materials.
| | |
 |
LOCK HOPPER VALVES
LOCK HOPPER VALVES
DV300mm Dome Valve complete
with Drop Tube Assembly
Top Dome Valve
Type - Inline
Body - Cast Iron/Armourcoated
Dome - 316 St. St./Armourcoated
Seal - Silicone
Flange - OKS - 450-DFG-01
Actuation - Kinetrol
Bottom Dome Valve
Type - Inline
Body - Carbon Steel/Armourcoated
Dome - 316 St. St./Armourcoated
Seal - Silicone
Flange - OKS-450-DFG-01
Actuation - Kinetrol
Drop Tube
Fabricated Mild Steel complete with Flanges and Inspection Port, internal surfaces PTFE coated.
Duty - Discharge from centrifuge
Media - STPP, SodiumCarbonate, Sodium Sulphate
Pressure - 0.05 Kg/M2
Temperature - 150C
Additional Features - Open/Close proximity switches
The Dome Valve replaces existing competitor's Valves
| | |
 |
Moduload
The Moduload, modular hopper loader is the vacuum vessel used to collect the conveyed product and separate the air / product mixture. The hopper has a primary filter mounted in the lid of the vessel, which prevents material being carried over in to the vacuum unit
Benefits include
Modular Construction for quick and simple
adaption to changing process needs
Flexibilty to meet present and future needs
Time and cost savings from guaranteed
performance
Easy clean
Can be added or adapted to ANY negative
pressure system
Reduced maintenance downtime
Fluidisation for cohesive powders
| | |
 |
Pneumatic Conveying Components
Components available for Pneumatic Conveying Systems Include:
Dump Valves
Terminal Boxes
Dome Type Switch Valves
Tube Valves
Density Stabilisers | | |
 |
Powder and Bulk Loading Systems
LOADING SPOUT
Clyde Materials Handling provide complete bulk loading systems for dust free applications with the capacity and flexibility to perform in any industrial environment.
Our systems are capable of dealing with the varied demands of a wide range of industries ranging from the robust, aggressive conditions present in the Cement, Chemical and Metals Industries, through to the easy clean, hygienic conditions demanded in the food industry.
Clyde's bulk loading systems provide for a cleaner more efficient handling of the product, excellent product flow and reduction of product loss, operating costs and maintenance expenses.
Our range of equipment includes
Loading spouts
Spout positioners
Airflow conveyors
Flow control gates
Pulse jet dust collectors
Product diverters
TYPICAL INSTALLATION
The equipment is used for loading a wide range of materials into open or enclosed containers, such as railcars & ships, stockpiling, or totes through round hatch openings, and has been supplied to major blue chip companies and government bodies worldwide
| | |
 |
STURTEVANT Turbine type Air Exhausters and Blowersare constructed for continuous duty, every day, year after year without adjust
Designed and engineered to produce suction from 50mm Hg to 250mm Hg and air pressure from 0.068Bar(G) to 0.54 Bar (G). With air flows up to 60 cubic metres per minute, STURTEVANT offer a unit to suit most applications.
Advantages
Straightforward design with good internal clearances
No wearing parts requiring lubrication
Air produced free from oil vapour, moisture
or other contamination
Power consumption varies with volume of air produced
No need for relief valves or other safety devices
| | |
|
|
|
|
CODERE SA Industrial furnaces
|
|
 |
Batch furnaces
Fields of application
- Solution annealing of light alloys
- Annealing of aluminium parts for the automobile industry
- Maturation / aging of nonferrous alloys
- Treatments up to 650°C
| | |
 |
Continuous
Fields of application
(under protective gas)
- Hardening
- Carburizing
- Carbonitriding
Production: hardening 50 - 500 kg/h
Conveyor width: 200 - 650 mm
Heating length: 2000 - 5000 mm
Maximum temperature: 950ºC
Automatic production line with belt conveyor including:
- loading systems
- handling systems
- weighing device
- washing machines
- treatment furnace - quenching baths
- tempering furnace
- tank to stop tempering process
The elements can be heated by electricity or gas.
These continuous lines are used for carburizing, carbonitriding, tempering and hardening with quenching in oil, water, polymers or salt.
They serve to treat series pieces, e.g. screws, bolts, ball-bearings, springs etc.
The high degree of informatization, the quality of the materials and the simple construction guarantee a reliable and at the same time profitable production.
The elements of our installations can be easily integrated into already existing production lines.
Advantages
- Gas-tight channel with preheating zone
- The upper part of the furnace consists of several elements,which can be dismantled easily.
- The engine-turbine-units are mounted on a system of weight compensation, which allows expansion
- Dismantling of turbines and O2-probes from the top of the furnace
- Heating elements and burners can be dismantled without complete standstill of the installation
- Continuous, controlled drive of the conveyor
- System to dry the conveyor
- Easy access to all regulating elements
- Regulation of the carbon potential for every single zone (Econox oxygen probe)
- Homogeneity and reproducibility of the treatments
- Quick change of the treatment cycles
| | |
 |
Hardening automate
Field of application
(under protective gas)
- Austenizing of stainless, self-hardening and high-speed steels (tools, dies, punches)
- chambers for cooling under nitrogen
- Venting of the furnace chamber by prevacuum and purging with nitrogen
- Treatments up to 1250°C
| | |
 |
Modular construction
The modules will be adapted to your heat treatments carried out under controlled atmosphere.
These patented systems do not need any mechanical locking of the charges.
Fields of application
(under protective gas)
- Austenizing (hardening)
- Carburizing
- Carbonitriding
- Nitriding, nitrocarburizing, oxynitriding
- Annealing, tempering and brazing
- Treatments up to 1100°C
- Alkaline washing
- Washing with solvents
| | |
 |
Pot furnace
Austenitizing, carburizing, carbonitriding
- Annealing, tempering, brazing (Annealing of beryllium bronze and brass
- Nitriding, nitrocarburizing, oxynitriding
- Treatments up to 1100°C
| | |
 |
Pusher type
Fields of application
(under protective gas)
- Annealing of precious metals (gold/silver) with integrated cooling
- Treatments up to 1100°C
- For sections, wires, plates
| | |
|
|
|
|
Cognex ID Products
|
|
 |
Checker
New Checker 252!
Checker 252 adds new software sensors that verify height, width, and diameter and deliver reliable pass/fail results on high-speed production lines.
The new Checker 252 model has been added to our award-winning Checker vision sensor product line. In addition to all the inspection capabilities of the Checker 232, the 252 model adds new sensors to verify height, width and diameter, making pass/fail measurement verification simple and reliable.
Key to the simplicity of the Checker 252 is its One-Click Setup™. By simply clicking on the center of the part feature to be inspected, an image of a familiar caliper appears and locks on the edges of the part feature, sets the minimum and maximum thresholds, and learns edge polarity…all automatically.
Checker 200 Series
The simple, powerful vision sensors from Cognex
The Checker 200 series are all-in-one vision sensors with built-in lighting and a variable working distance, capable of inspecting over 6,000 parts per minute — all in a package small enough to fit into tight spaces. They pack a host of new advantages into a small size.
Inspects features that other sensors cannot. Checker actually understands what your part looks like.
Inspects unlimited multiple part features simultaneously with a single Checker.
Overcomes varying part positions. Parts on a line typically vary in position, and Checker tracks all of them without requiring precise part handling.
Detects a part by finding an actual part feature. This provides extremely reliable part detection unattainable with photoelectric sensors.
Most Checker models are available with the Cognex SensorViewTM 350, a compact, industrial, panel-mount display.
Models
Checker 200 Ideal for Part Detection, over 6000 parts per minute
Checker 201 All the features of Checker 200, plus unique inspection software sensors
Checker 202 All the features of Checker 201, plus Ladder Logic for custom inspections
Checker 232 All the features of Checker 202, plus functions to inspect smaller features and a wider field of view. 1,500 parts per minute
Checker 252 All the features of Checker 232, plus new sensors to verify height, width and diameter
| | |
 |
Food and Beverage
More than 25 years of experience in food and beverage applications uniquely positions Cognex to help customers achieve the highest levels of confidence in packaging, safety, and productivity. | | |
 |
id products
DataMan™ 7500 Series | | |
 |
Semiconductor and Electronics Products
Cognex has been the leading vision supplier to the semiconductor and electronics industry since its inception in the early 1980’s as a provider of wafer ID solutions. Since then, Cognex has expanded its offerings to include programmable vision software, application-specific solutions for electronics OEMs, as well as turnkey wafer readers and vision-based wafer pre-aligners. These are designed to keep pace with the increasing need for high-resolution alignment and inspection, as well as the growing use of ID solutions to track wafers and ICs through all stages of manufacturing.
| | |
 |
Solar Production
Cognex® provides solar manufacturers with a wide array of vision products that provide specific production solutions — from wafers to finished panels. | | |
 |
Vision Guided Robotics
Innovative new products and capabilities from Cognex make integrating vision systems into 2D robotic applications faster and easier than ever before. | | |
|
|
|
|
COILTEC Maschinenvertriebs GmbH
|
|
 |
Rolling mill plant
Rolling mill plant as well as the corresponding auxiliary machines for processing ferrous and non-ferrous metals form the core activities of our company. They are the centre of our product range for both second-hand and new machines.
| | |
|
|
|
|
Coko-Werk GmbH & Co. KG
|
|
 |
Injection Moulding
The individual requirements of injection-moulded parts determine the manufacturing method. Constant improvements to and modernisations of this technical process are the basis for our high standard of work and services. We have made a name for ourselves as a system supplier. | | |
|
|
|
|
Clemco International GmbH
|
|
 |
Big Clem
No Job too big, even for the biggest jobs CLEMCO designed a wide range of Bulk Blasters. Customers can choose between 1.500 and 10.000 Liter capacity, either stationary or portable design. On request we offer mobile units Highway towable. The additional choice on outlet quantities makes any BIG CLEM to fit your needs.
| | |
 |
Blast Hose, Holders & Couplings
Nozzle Holder:
Nylon
For nozzles with a
25 mm or 50 mm thread
For hoses
13x7, 19x7, 25x7,
32x8, 38x9, 42x9
Metal Coupling:
Includes safety pin
Sandcast construction
Materials:
BronzeAluminium
Cast Steel
Nylon Coupling:
Injection molded for consistent shape
Integral steel safety spring
Blast Hose:
Inner tube of wear-resistant rubber or super wear-resistant rubber quality
Intermediate layers for higher pressures or high flexibility
Working pressure:
12 bar
Any length up to 60 meters in one continuous piece.
| | |
 |
Blast Machines
With 60+ Models, CLEMCO´s range offers the customer the best variety to combine size, piping dimensions and valve selection according to his specific needs. All models are designed and built to highest quality and safety standards.
The pots are approved to latest CE directives but we also offer other approvals on request. | | |
 |
Nozzles
Measurement and Inner Contour:
Inner diameter: 3 - 16,0 mm
Length: 45 - 230 mm
Inner shape: Venturi and straight bore
Entry: 25 and 32 mm
Special Nozzles:
Angle nozzles wuth single or multiple orifices
Flange mount nozzles fit quick coupling
nozzles holders
Jacketiing Materials:
Aluminium
Urethane
Rubber
Liner Materials:
Silicon Carbide
Tungsten Carbide
Boron Carbide
| | |
 |
Operator - Safety - Equipment
Abrasive Blast cleaning requires specially designed protective clothing and an air-fed respirator. CLEMCO´s Apollo helmets, blast suits, filters and related equipment deliver the highest level of protection you can buy. Wearing CLEMCO Operator Safety Equipment lets you concentrate on the job of abrasive blasting. Inside your comfortable Apollo helmet, you breathe clean, filtered air, while the CLEMCO blast suit and gloves protect you from rebounding abrasive. | | |
 |
Remote Controls
The RMS 2000 is a consequent further development of the prior model RMS-100. Offering highest operating comfort, minimized pressure loss, quick reaction time as trouble free working, she sets new standards and has highest reputation in the market within the pneumatic Control Valve.
With the following accessoris you make the RMS 2000 a complete package of highest reliable pneumatic or electro-pneumatic remote control system.
| | |
|
|
|
|
Classen apparatebau Wiesloch GmbH
|
|
 |
Biermann Heaters
up to 400°C, with salt solutions up to 500°C
Fuels
• all standard fuel oils
• all standard fuel gases
• flammable dusts
• special oils and off-gases
Range of Capacity
• 1,000 kW to 25,000 kW
Design
• single-pass upright with vertical up-firing
• Biermann heater may be designed according to any required specifications of customer in detail
Heat Transfer Media
• organic heat carriers
• salt solutions
• high-pressure hot water
• pressured gases
Special Characteristics
• Biermann heaters have a large combustion chamber and are therefore especially suited for combustion of special fuels. The high intake allows the use of atmospheric burners without combustion air blowers. High efficiency levels are attained through the use of downstream economizer units and high-
efficiency combustion air preheaters. The space requirement (floor area) for this equipment is very small. The specific equipment design is very flexible due to the various standards of the chemical and etrochemical industry.
| | |
 |
Dust & Fines Combustors
For thermal fluid heating up to 350°C with single and multiple-pass boilers
Range of Capacity
• 300 kW to 10,000 kW
Fines and multiple fuel combustion systems with integrated pilot and ancillary burners for natural gas and heating oil.
Combination of fines combustions with grate firing is possible.
| | |
 |
Electric Heaters
For liquid and vapour phase operation
Range of Capacity
• 4 kW to 10,000 kW
Design
• tube bank construction
• as horizontal vaporizer
Special Design
• design for installation in hazardous areas
• immersion heating elements with sleeves
• continious regulation
• TPC-systems without internal heating rods for "any temperature at any pressure and any medium"
| | |
 |
Reciprocating Grate Systems
For hot gas generation thermal fluid heating and use in stream and hot water boilers
Fuels
• wood residues, chips, bark
• rice husks
• solid biomass
Range of Capacity
• 5,000 kW to 50,000 kW
Proven Design
• automatic charging through hopper without bottlenecks
• tipping grate above deashing shaft
• automatic deashing
• PLC control system
• automatic firing regulation
Special Execution
• Fuel storage and supply facilities
• flue gas treatment systems
• turn-key installations
• injection systems for particulates and dust as primary and secondary fuels
| | |
 |
Thermal Exhaust Facilities
For neutralisation of pollutants by thermal oxidation
Range of Capacity
• 500 to 150,000 Nm³/h
Reaction Temperature
• 700 to 1,250°C
Pollutants
• organic steam in exhaust air or exhaust gas inert gas or steam in various concentrations
Design
• as combustion chamber with interior lining
• as all-steel combustion chamber
• each with integrated or external waste heat recovery heater
Additional Fuels
• natural gas
• heating oils
• special fuels
Special Design
• facilities for combustion of explosive gas mixtures
| | |
 |
Underfeed Stoker
For thermal fluid heating up to 350°C
Fuels
• wood residues, chips, bark
• solid biomass
Range of Capacity
• 300 kW to 10,000 kW
Design
• standard execution contruction with upright three-pass heaters
• internal ash collection box for
• manual deashing
• multi-cyclone dust precipitator
• automatic firing regulation
Special Design
• hydraulic grate vibration system
• mechanical water-cooled deashing system
• PLC control system
• pilot burner for automatic start up and back-up burner for supplement firing
• ancillary dust firing
• combustion air preheating for damp fuels
| | |
|
|
|
|
Christian Gierth GmbH
|
|
 |
Tooling
Cutting tools, coated
Slot millers | | |
|
|
|
|
Christof Reinhardt Maschinenbau
|
|
 |
BASIC-LINE
3 model series with various widths of cut.
Pneumatic or hydraulic saw movement.
Also available as a bevel saw.
Sturdy reel tables in various lengths and widths.
5 length fence systems.
Clearly legible dimension scales.
Available with complete conveying systems.
| | |
 |
Cut-off saws CROSS CUT AND AUTOMATION
Precise, speedy positioning - even if the wood is wet or frozen.
Hardened guideway, designed for the highest load.
Double holding system - which is capable of controlling different work pieces, even round cross-sections.
Single- or package processing of the work pieces.
Processing of the entire work piece with minimum waste. | | |
 |
ECONOMY-LINE The Clever Solution.
Electronic marking of defects and grading by laser beam.
Mirrors assess base of workpiece.
Positioning of the work pieces by a heavy roll feed system.
Maximum performance by simultaneous assessment and cutting on different levels.
Optimum wood utilisation using computer technology to determine production priorities.
Sorting according to quality.
Saw device has cutting width up to 1.000 mm | | |
 |
QUICK-STOP
Precise, speedy positioning - even if the wood is wet or frozen.
Hardened guideway, designed for the highest load.
Double holding system - which is capable of controlling different work pieces, even round cross-sections.
Single- or package processing of the work pieces.
Processing of the entire work piece with minimum waste. | | |
 |
SLIM-LINE
Single- or package processing of the work pieces.
Processing of the entire work piece with minimum waste.
Reliable, sturdy saw unit.
Precise control of the work piece using a lateral push device.
Customized solutions for your requirements through modular construction.
| | |
 |
VARIO-LINE
Marking of defects using either bar codes, laser beams or a scanner.
Optimising using quality, width and thickness as the criteria.
Maximum flow rate by efficient work piece handling.
Trouble-free waste disposal at the saw blade without additional saw cuts.
For wood cross-sections up to 160 x 260 mm (other cross-sections upon request). | | |
|
|
|
|
Chronos Richardson GmbH
|
|
 |
CHRONO-PAL™ PL 150 SB
The CHRONO-PAL™ PL 150 SB high level automatic palletizer is designed to stack 1 kg bags at speeds of up to 9,000 bags per hour. It fulfils the demands of modern bagging plants and the high performance of this palletizer is achieved through the use of dual feeding belt conveyors. Each layer is formed on the layer table in such a way that the upper fold always points towards the middle, thereby ensuring a smooth outside of the pallet. Even if one bag loses product, the contents remain in the centre of the filled pallet and - as a result - the outside remains clean. Another special feature of this palletizing system is the fact that an interlayer is not used as with common palletizers of this type to stabilise the filled pallet. The output pallet can thus be placed directly at the point of sale. | | |
 |
CHRONO-VAL™ E-VAL
CHRONO-VAL™ E-VAL | | |
 |
dosing systems
dosing systems | | |
 |
FFS-200 Series Horizontal Form, Fill and Seal Bagger
The FFS-200 Series Horizontal Form, Fill and Seal Bagger is an automatic system which makes its own bags from heat sealable rolls of polyethylene pre-printed centre-folded film (U film). The combination of a unique non-stop operation design and the horizontal configuration allows the use of a large film roll providing continuous operation for many consecutive hours. The FFS-200 Series is designed to package a wide range of loose fill materials at rates of up to 1,920 bags per hour. It can be integrated upstream with either a weighing or volumetric feeding system and downstream to conveying and palletizing system | | |
 |
loose fill bagging systems
loose fill bagging systems | | |
 |
VF-2000 Series Volumetric Feeder
The VF-2000 Series Volumetric Feeder is designed to handle a wide variety of hard-to-handle products. It is used as a feeding system for the FFS-200 Series Horizontal Form, Fill and Seal Bagger. The VF-2000 is equipped with highly reliable product level detectors and a 2-speed belt conveyor, driven through a pneumatic clutch-brake. A motorized leveling device ensures a constant delivery of product into the bag. The combination of the dual speed conveyor and vertically adjustable leveling device allows for optimization of bagging rate for a wide range of bag sizes. | | |
|
|
|
|
CIMBRIA SKET GmbH
|
|
 |
Chain Conveyor RL-RM / 40-1000 TPH
Cimbria chain conveyors are supplied in easily assemble modular sections, in galvanised plate, alternatively a painted finish can be supplied for types RL/RM 3-12, or hot dip galvanised for types RL 14-16. The conveyors are also available with a wide range of accessories | | |
 |
Dry Stoners TS 90-S / 2.5-5 TPH
The granular material to be separated is taken to the table deck (in its conveying direction) through an adjustable spring-actuated flap.
Depending on the grain size, the deck surface, with its adjustable inclination of 6-15°, is covered by a fine-meshed or a large-meshed wire cloth, through which is a steady and adjustable airflow is aspirated.
The combined effect of the vibrating movement and of the air passing through the deck causes an arranging in layers of the material flowing in (fluidization).
The heavy admixtures sink towards the bottom and are moved to the highest point of the table deck surface (stone outlet) by the contact with the rough deck covering.
| | |
 |
Dryer Top
Material
The top can be supplied in either:
2 mm aluminium sheets according to DIN 1725-part 1 or
2 mm galvanised steel plate according EN 10142.
Top Section
The top section is delivered with an inlet flange see type in table 1. The flange is located centrally at the top section. Furthermore the top section is supplied with an inspection hatch (500 x 540 mm) and a stand for level meters. | | |
 |
Gravity Separator GA 31 / 0.5-2.0 TPH
The deck is fluidised by a completely uniform pressurised air system stratifying the light material to the top of the product bed and allowing the heavy material to contact the deck surface.
The deck is inclined from side to side and inlet end to discharge end at adjustable angles. | | |
 |
Super Universal Cleaners
Super Universal Cleaners (100-series) | | |
 |
Veg. Oil Extraction-Screw Presses
Veg. Oil Extraction-Screw Presses Roller Mills and Stack Cookers Screw Presses Refining Plants Oleo chemistry | | |
|
|
|
|
Cinpres Gas Injection Ltd
|
|
 |
Gas Control - CPC Standard Features
GENERIC GAS CONTROLLER FEATURES
* Precise pressure control using State of the Art Gas Control Module
* Integral in-line gas filters
* Independent control of up to four GCM's on up to two moulding machines
* Full closed loop pressure control
* Start delay plus 5 control phases per cycle, each with ramp and hold time, giving a total of 11 timed control steps per cycle.
* Maximum standard operating pressure 345 Bar (5000 psi)
* Full audible and visual alarm with safety interlock system.
Options
* GCM Recovery modules to reclaim N2 gas
* Full range of connecting cables and flexible hoses
* Standard booster (A8 model) - 8 m3/hr nom
* Increased Operating Pressure 620 Bar (9000 psi)
* Integral Hydraulic Power Pack with up to 4 Independently Controlled Valves
* Oxygen Analyser to monitor the Purity of the Nitrogen Supply Gas
* CPC 3000 MF
* CPC 3000 SF
* CPC 3000 Pilot | | |
 |
Gas Control - PPC Standard Features
GENERIC GAS CONTROLLER FEATURES
* Precise pressure control using State of the Art Gas Control Module
* Integral in-line gas filters
* Independent control of up to four GCM's on up to two moulding machines
* Full closed loop pressure control
* Start delay plus 5 control phases per cycle, each with ramp and hold time, giving a total of 11 timed control steps per cycle.
* Maximum standard operating pressure 345 Bar (5000 psi)
* Full audible and visual alarm with safety interlock system.
* GCM control cables available in a range of lengths
Options
* GCM Recovery module to reclaim N2 gas
* Full range of connecting cables and flexible hoses
* GCM control cables available in a range of lengths
| | |
 |
Gas Preparation - GENTEC Gas Generation - Low pressure N2 gas generation systems
* A comprehensive range of capacities for generation of N2 gas
* N2 generation by 'pressure swing adsorption', using carbon molecular sieve (CMS) to adsorb Oxygen.
* Integral pre-treatment of inlet compressed air.
* Standard N2 purities from 98% to 99.5%.
* Low pressure gas storage, including recovery capability for recycling gas recovered from gas controllers
* Filtration of low pressure (inc recovered N2) gas.
Options
* Oxygen analyser with calibration and alarm functions.
* Dedicated air compressor systems for generator feed air.
| | |
 |
Gas Preparation - HICOM Compression - High Pressure N2Gas Compression
* A comprehensive range of capacities for N2 compression.
* Single and Duplex (twin compressor) versions.
* Industrial high pressure gas compressors rated for continuous operation at output pressures up to 350 Bar (5000 psi).
* 2000 hour service interval
* Ultra low lubricating oil consumption and carry over
* Filtration of high pressure gas.
* HP gas storage module.
* Fully automatic microprocessor control with condition setting and monitoring.
Options
* Recovery module for recycling gas recovered from gas controller
| | |
 |
Gas preparation systems
A complete range of highest quality industrial gas generation and compression systems for un-interrupted gas supply. | | |
|
|
|
|
CJSC GRASYS
|
|
 |
Air separation unit
Air separation plants
From our general experience, we know that the basic components constituting the ambient atmosphere are oxygen (21%), and nitrogen (78%).
GRASYS Air Separation Units are provided to disengage each one of these components with the scheduled purity at the output. When it comes to the air separation process it is worth talking of the two major ends of this method, namely:
- the production of gaseous nitrogen
- the production of gaseous oxygen. | | |
 |
Carbon dioxide purifier
Hydrocarbon plants
GRASYS hydrocarbon separation plants are produced with the use of the company brand-new proprietary membrane capable of delivering substantial benefits in comparison with other gas separation technologies.
Due to their cost-effectiveness combined with required longevity GRASYS membranes may be efficiently used in industrial applications where operating conditions excludes the adoption of other polymer membrane types. Besides, this membrane gas separation technology has a modular structure allowing expansion or modification of operated systems and prompt response to any changes in feed composition during the entire life cycle of a given source (e.g. increasing CO2 concentration or changing hydrocarbon flow composition in a natural gas field) — and all this without unnecessary additional costs. The description below features some of the primary applications of GRASYS gas separation systems | | |
 |
Hydrogen plant
Hydrogen Plants handle synthetic gases and water-containing gases that serve the purposes of hydrotreating and hydrocraking in the oil refining industry; ammonia production, fat, coal and oil hardening; in the chemical industry where hydrogen-bearing gas mixtures are featured; as well as in the metal industry.
| | |
 |
Methane purification unit
Hydrocarbon plants
GRASYS hydrocarbon separation plants are produced with the use of the company brand-new proprietary membrane capable of delivering substantial benefits in comparison with other gas separation technologies.
Due to their cost-effectiveness combined with required longevity GRASYS membranes may be efficiently used in industrial applications where operating conditions excludes the adoption of other polymer membrane types. Besides, this membrane gas separation technology has a modular structure allowing expansion or modification of operated systems and prompt response to any changes in feed composition during the entire life cycle of a given source (e.g. increasing CO2 concentration or changing hydrocarbon flow composition in a natural gas field) — and all this without unnecessary additional costs. The description below features some of the primary applications of GRASYS gas separation systems.
| | |
 |
Nitrogen plant
Nitrogen Plants and Stations
Membrane nitrogen plants
The most advanced, completely automated plants designed for production of nitrogen from atmospheric air.
Nitrogen purity — up to 99.95%, Recovery — up to 5000 nm³/hr
Adsorption nitrogen plants
Up-to-date stationary automated systems designed for gaseous nitrogen production from air.
Nitrogen purity — up to 99.999%, Recovery — up to 5000 nm³/hr | | |
 |
Oxygen plant.
Oxygen Plants and Stations
Adsorption oxygen plants
High-performance plants designed for oxygen production from atmospheric air and cylinder filling.
Oxygen purity — up to 95%, Capacity — up to 3000 nm³/hr
Membrane oxygen plants
Fully automated membrane plants designed for air oxygenation.
Oxygen purity — up to 45%, Capacity — up to 10000 nm³/hr
Cryogenic oxygen plants
Plants for deep air freezing designed to produce both liquid and gaseous oxygen from air.
Oxygen purity — up to 99.9%, Capacity — up to 30000 nm³/hr
| | |
|
|
|
|
Claas GmbH & Co. KG
|
|
 |
Annealing
The latest HICON®-H2 annealing technique achieves moulding levels up to 100%. Automated annealing processes ensure joining properties, which can be reproduced. | | |
 |
Application Samples
Application Samples | | |
 |
drawing
The drawing machines cover a dimensional range of 0.50 to 50.00mm Ø. Production tolerances are monitored online using laser-measuring equipment. | | |
 |
Pickling
A modern automatic pickling plant meets the highest demands on surfaces. The integrated tunnel extraction considerably reduces environmental pollution. | | |
 |
wire
Cold heading wire
Through-hardened bearing steel
Quench and temper spring steel wire
Tool steel for cold-working
Wire from unalloyed steel | | |
|
|
|
|
Clariant International Ltd
|
|
 |
Chemicals for Paper
Clariant paper chemicals provide you with products, service & innovation
For the last 40 years Clariant has been a leading supplier of paper chemicals. Our products have achieved a reputation for quality and excellence and our clients trust the expertise, experience and knowledge of technical people.
Working closely with our clients in this way our research technicians have developed and enhanced desirable characteristics with specific function in mind, including hydrophobicity, surface strength, film forming ability and reactivity. We have also worked within end-user parameters to take qualities such as ink-jet printability, toner adhesion and co-efficient of friction into consideration.
Clariant recognizes the importance of identifying the optimum product for any given application. We ensure that each chemical provided is not only fully compatible with the other ingredients, but will combine in a positive manner providing the desired result for the fibers used.
We offer a complete range and a total service package. | | |
 |
Clariant Paper Colorants
Clariant paper colorants continues its tradition as a progressive and responsible supplier of innovative new products
Clariant has a long history as a colorant supplier to the industry, dating back to 1886.
With our dedicated paper research and development team, we were a pioneering company to develop anionic direct (Cartasol F), cationic direct (Cartasol K) direct and modified basic (Cartasol M) liquid dyes especially designed for paper application and remain the only company with a complete range of colorants.
We have the most technologically advanced pigment products available to the paper maker today. Our products include the extensive Cartaren and Flexonyl LAP and Hostatint ranges, as well as specialized sulphur dyes - Diresul P, all specifically developed for use in the paper industry.
The unique diversity of our products means that we can provide the comprehensive service that clients in all sectors demand.
| | |
 |
Clariant Paper Optical Brighteners
Clariant Paper Optical Brighteners have a long history as a supplier to the industry
We are the only major OBA producer to have a Research and Development team dedicated specifically to paper. This investment enables us to produce innovative products that meet the needs of specific papers and processes.
As well as innovative, our product range is extensive and is backed by a team of experts with a wide knowledge in the particularly difficult field of measurement of white papers plus vast experience in all paper OBA application areas. | | |
 |
colorants,optical brightening agents and chemicals
colorants,optical brightening agents and chemicals | | |
 |
Packaging / Board
What do your customers expect from your packaging / board?
Strength, color, whiteness, printability, surface finish,
In an evolving industry, we are constantly striving to help you meet the challenges set by market demands and legislation.
Whether you require enhanced printability, color and surface finish, or packaging which is complaint with food contact guidelines and provides barrier to oil, water, moisture or grease.
Clariant can offer solutions and develop new alternatives through extensive technical support. | | |
 |
Uncoated Wood-Free
What do your customers expect from your uncoated wood-free paper?
Improved color, whiteness, strength, printability, runnability and uniformity
In this highly competitive sector, we at Clariant understand your needs. Your goal is to deliver a cost efficient, uniform, quality product that satisfies the expectations of your customers
Whatever your needs may be - improved colors, high whiteness, excellent printability, strength or runnability - Clariant products will help you achieve your quality and cost objectives | | |
|
|
|
|
COMAS SpA
|
|
 |
Biscuit and wafer filling machines
Vertical and Horizontal Injection Machines | | |
 |
Biscuit Depositor
Moulding machines | | |
 |
Layer Cake Equipment
Decorating equipment | | |
 |
Pie Equipment
Pie Equipment | | |
|
|
|
|
Comau S.p.A.
|
|
 |
Innovative Machine Tools
Always one step ahead
Is there a better way?
We investigate relentlessly if there is a better way.
If technology and competences will let us provide our Customers new tools and new architectures; to make production ever leaner, more effective and reliable.
At Comau we are passionate in technology and invest consistently in innovation, on
- Machine tools
- Automation and assembly centres | | |
 |
Laser welding technologies
Innovation and new technologies ...
Continuously expansion and improvement of our product range allows us to be ready to answer to any request.
Our partnership with the major automotive producers, international research centers and universities insure the top level of innovation.
The laser welding technologies developed by Comau BW&A and the variety of patents pending are solid expression of this innovative strength.
Our successes:
• Openrobogate cells for body framers
• H-Gate geo systems for body sides
• Modular end-effectors and grippers
• Floor and overhead pallet conveyors
• Trunions
• Clamps and risers,
Transfer & transport systems:
• Belt and cross-belt conveyors
• Lifters
• Power roller tables
• Turning tables
• Elevators
• EMS
Our Advance Engineering and Product Certification Departments are committed to testing and certifying our products and solutions and also guarantees that products developed by our partners, comply with our quality standards. | | |
 |
Metal cutting Machine tools
Metal cutting Machine tools | | |
 |
New Control Units & Teach Pendant
New Control Unit and Teach Pendant
The new Control Unit from Comau Robotics is the expression of the technological evolution of a controller which, since its first introduction, has always been one step ahead of the market standards and represents the most recent state-of-the art of technology.
C4G is provided with the new user-friendly Teach Pendant TP4i, the lightest programming terminal on the market, ergonomically developed in co-operation with an important Italian Research Centre.
New WITP: the first wireless Teach Pendant
Wireless technology at your hand
Comau Robotics has pleasure in presenting the new WiTP, the first important application of Wireless technology in the industrial robotics sector, maintaining and implementing the typical operations of traditional networks (wiring fitted) but with no need for physical connection between the robot Control Unit and the Teach Pendant.
Revolution of programming
The innovative technology developed by Comau Robotics in cooperation with the most prestigious Engineering Universities in the world, enhances the operator's mobility inside the cell with no need to worry about wire routing, The Teach Pendant can be connected to the Control Unit as required for cell programming or monitoring activities a safe "Hot Plug-in" procedure. | | |
 |
SMART NH PRESSBOOSTER
The Smart PressBooster models, with their exceptional range of action and high acceleration performance, are designed for loading and unloading operations and are able to handle both small items and components of large dimensions.
These robots are ideal for all flexible automation solutions to handle parts between presses replacing hard-automation solutions.
Smart PressBooster are available in model for floor or shelf installation, with maximum arm reach 3526 mm a wrist torque up to 12,50 nm and a payload up to 100 kg.
Technical Features:
* Wide working volume: 3.5 m (SH version)
* Shelf version for handling of large-sized parts
* Dedicated components:
- additional motor on axis 1 (only for NH3/P)
- high-tech gear boxes | | |
 |
SMART NJ 130
The 2 smallest models of the new Smart NJ family are dedicated to medium up to high payload applications, thus maintaining unchanged the characteristics of the NJ family (the parallelogram structure, much more thinner than the NH family one).
These models are suitable for a wide range of applications: spot welding, handling, sealing, machining, foundry and harsh environment applications, press and many others.
Technical Features:
* 110 – 130 kg payload
* Reduced overall dimensions and wide working volume
* Rapidity and flexibility to optimize the cycle time
* High stiffness
* Space saving design
* Flexibility in terms of configuration of the cell: installation position Floor / Ceiling | | |
 |
Smart NX2
The Smart NX models are the strongest robot family in the world with payload capacity up to 800 kg and reach of more than 3,8 m.
These robots my replace hard automation devices providing a higher flexibility and reliability in heavy-duty tasks.
The Smart NX2 is a four axes palletizing robot: it can handle up to 800kg and represents the heart of high flexible robotized modules.
Technical Features:
* Payload capacity up to 800 kg
* Cell to cell transfer
* Cooperative spot-welding
* Warehouses
* Buffers
* Up and down-load operations | | |
 |
SMART SiX
SMART SiX
SMART SiX robots, the smallest within the Comau range, boast an exceptionally compact design particularly suitable to all those operations that require fast movement and a high degree of repeatability.
The SMART SiX range also features a model exclusively dedicated to arc welding: the SMART SiX ARC designed to optimize movement specifically for arc welding. This model also features an integrated fitting solution which involves the passage of the cables through the robot base.
Technical Features:
* 6 kg payload
* 1.4 m maximum horizontal reach
* High repeatability: 0.05 mm
* Wrist designed to maximise the grade of penetration
* Cables way internal to the axis 1
* Excellent tracking capacity
* SMART SiX ARC: arc welding dedicated version | | |
|
|
|
|
CPC Colder Products Company GmbH
|
|
 |
Drum Connectors DrumQuik® PRO Series
For safe extraction of fluids from jerry cans, drums and intermediate bulk containers (IBCs), Colder offers quick disconnect couplings and adaptors ranging in size and material. The durable and reliable DrumQuik® dispensing connectors can be easily used with common bung closures and the adaptors are offered in single and dual ports, with dip-tubes included. | | |
 |
Metal MC Series
Colder's chrome-plated brass couplings are offered in 1/8" and 1/4" nominal flow. These couplings are designed for durability and an attractive appearance. Colder also offers aluminum couplings in 3/8" and 5/8" as well as nickel-plated zinc die-cast couplings in 1/4" and 3/8" nominal flow. These couplings are designed for high performance and high flow. | | |
 |
NSF-Food Grade / PLC NSF Series
Colder Products Company manufactures many products specifically for the Food & Beverage marketplace. Colder lists many of its product lines under the criteria of NSF/ANSI Standard 169 (formerly C-2). All of our products are available with built-in shut-off valves that automatically shut off the media, whether it's air or water, when you disconnect the coupling. | | |
 |
Plastic PMC12 Series
Colder's plastic couplings cover a wide range of general-purpose applications. They are available in 1/8", 1/4", 9/32" and 1/2" nominal flow. One-hand connection and disconnection and integral terminations make the plastic coupling the choice for ease of use and manufacture. | | |
|
|
|
|
CRAFTSMAN TOOLS LTD
|
|
 |
COROMANT CAPTO® TOOLHOLDING
Sandvik Coromant Capto® is the first universal quick-change tooling system suitable for turning, milling, boring and drilling. Combining Coromant Capto® toolholders with CNC machines shortens set-up times and increases your productivity. | | |
 |
Craftsman cube range stretches across the globe
Collection complements ‘Crafticube’ system
With a client list spanning the globe and taking in major players such as Boeing, Hyde Aerospace, BNFL and BOC Edwards, Craftsman Tools forms an impressive success story.
Within its workholding range, Craftsman is able to offer a complete series of cubes, either from its plain-faced standard stock, or via bespoke designs to meet exact process requirements.
Each cube allows the loading of a horizontal machining centre pallet with the maximum number of components, helping maximise the productivity of both single and twin pallet machines.
The plain-faced type mounts directly to a standard machine pallet so its faces are ready to take fixturing items. The faces are supplied finish machined, perpendicular to the integral base and edge locations, while “parallelism” is also assured.
These can also be used to apply the “Crafticube” system, which gives incredible flexibility in the application of fixtures to horizontal machining centres. At its heart is the cube; a top quality hollow casting, stress relieved and precision machined.
Its strong construction and integral base ensures dimensional stability and a capacity for arduous work. Two precise dowels on each face guarantee permanent datums and interchangeability of fixture plates.
Other members of the cube family, including hollow tee brackets, triforms and angle brackets, can also accept fixture plates by applying the same principles. These are ideal for the mounting of a series of vice units and other modular arrangements.
US engine manufacturer Dresser Waukesha, which is based near Milwaukee, Wisconsin, has been a client of Craftsman Tools for several years.
They are worldwide leaders in the design, manufacture and marketing of highly engineered equipment and services sold primarily to customers in the flow control, measurement systems, and compression and power systems segments of the energy industry.
Robert Johnson, said: “Dresser Waukesha is in the process replacing its entire manufacturing stock, and this is being carried out as it improves or launches new products.
“As with the aerospace contract, Craftsman was chosen because of the stability and accuracy of our cube holding.
“We’ve worked with Dresser Waukesha intensively over the past three years to put together a product that best suited their needs.
“Our representatives in the US met their chief buyer not too long back who paid us the ultimate compliment by stating that the company will not go anywhere else for its cube systems.
“With so many years experience in the design and manufacture of prismatic workholding systems, we have developed the highest level of expertise in this very important product.
“Our standard range is available on very short delivery, while at the same time we have proved that we can design and manufacture bespoke items to suit any industrial sector.” | | |
 |
Craftsman Tools' Rebranding
Marketing information consolidated into three areas.
Craftsman Tools has unveiled a rebranding exercise as it looks to strengthen its position in the marketplace.
The project has been driven forward by marketing executive Claudine Dusseau, who hails from France.
Soon after joining the business earlier in the year she was tasked with updating Craftsman’s sales brochures, which eventually brought about the rebranding.
The company now has newly-designed logo, strapline – “Collaborating with the World’s Finest” – and a series of sales brochures.
Claudine Dusseau said: “When I began looking at the existing brochures, what became apparent was that although the company has essentially three arms to it – toolholding, workholding and subcontract machining – there was an array of literature covering each area.
“Coming from outside the engineering industry, my first impression of sales brochures, not only at Craftsman but across the sector, was that they were very ‘conservative’.
“During the summer we had an intern working with us called Mike Urwin, a mechanical engineering student at the University of Leeds, who helped us with the initial concepts before we got in touch with a nearby marketing communications company, Phase 1.
Robert Healey, account director at Phase 1, said: “Craftsman Tools approached us with a very thorough briefing document for us to work from.
“One main aspect was that we could not tamper with the existing corporate logo too much. We kept the ‘mandrel’ insignia – because we didn’t want it to appear that the Craftsman brand had disappeared, then we added a silver ‘C’ around that and adopted new colours.
“Craftsman works with some major blue chip companies, and this helped us greatly coming up with the strapline ‘“Collaborating with the World’s Finest’.
“We also stylised the brochures by splitting them into the company’s three core areas; to help send out the message that Craftsman Tools is a major player.
“The exercise was also mirrored for its USA sister company Chevin Tools, and this was officially unveiled at the IMTS event in Chicago.”
Robert Johnson, Craftsman Tools managing director, said: “The rebrand has come at a really exciting time for us as we look to expand into other sectors and geographical areas.
“A correctly though out rebrand, regardless of the company or sector, instills pride in the business, and ours has helped us redefine our position in the marketplace, as well as giving us renewed focus to help take the business forward.” | | |
 |
New Product: The Split Boring Bars
We are pleased to announce the launch of our new range of split boring bar holders.
These boring bar holders have been designed for use with anti-vibration bars and they will also increase performance of standard boring bars.
We currently have a range of tool holding suitable for Mazak, Doosen Daewoo, and Mori Seiki machines. The range is continually developing and more information will be posted shortly. | | |
 |
QUALITY
Craftsman Tools Limited has many years of successful experience in design, manufacture and installation of high quality equipment. The company is accredited to ISO 9001:2000 as well as following both our own in-house quality manual and any further quality plans required by our customers.
* We supply material from approved suppliers with full certification and traceability.
* We select sub-contract partners who meet our own quality requirements and provide fault-free, on-time deliveries.
* We provide after sales technical assistance to ensure customer satisfaction
In achieving these objectives, we aim to exceed the customer's expectations in terms of quality and service.
Our inspection and testing is complemented by in-house pressure testing facilities and links with several external companies who provide further NDT services | | |
|
|
|
|
CREFORM Technik GmbH
|
|
 |
CREFORM - Accessories
With different skate wheel conveyors you can transport almost any imaginable container shape in their transport structure. For every application there is a different railway bracket with stop and surrender function.
In the event of damaged castors, every single part of our CREFORM skate wheel conveyors can be exchanged separately.
A broad spectrum of castors and roles with different diameters, running coatings and installation possibilities also form part of CREFORM accessories.
Our technical advisors are more than happy to assist you with the right choice of castors and roles.
CREFORM offers different floor elements for static structures, which are chosen according to your manufacturing requirements.
Also applicable is: light elements for light structures and not vice versa! No unnecessary waste of material. With CREFORM you can always modify.
| | |
 |
CREFORM - Joints
CREFORM standard joints
Connectors are the base components of all CREFORM structures. The CREFORM pipes are connected through them. Depending on the application, metal or plastic connectors are used. Both types have the same stability but different applications:
Metal Joints:
- Suitable for most applications
- Large choice of joint types
- Standard bolt size (5mm hex head)
- High strength, long-durability steel
- Coated for corrosion resistance
- Nickel-plated version for ESD structures
- Special stainless steel connectors available
- Ø32mm and Ø42mm connectors available
Plastic Joints:
- Numerous options; more than 90 to choose from
- Economical
- Lightweight
- Easy to glue
- Durably firm
- Different colours
- UV and moisture resistant
You can find detailed descriptions regarding all joints in our online shop! | | |
 |
CREFORM - Pipes
The standard pipe H-4000 has an outer diameter of Ø 28mm. The wall consists of 0.7mm thick cold-rolled steel. Extremely light and high stability characterise this pipe.
The sheathing for ASA thermoplast is available in different colours. The length of the pipe is 4000mm and the inside of the pipe is coated with a corrosion protector. | | |
 |
CREFORM - Tools
No extra qualification!
A pipe cutter to modify structures, hexagon socket wrench, ratchet to fix nuts and bolts, tape ruler, inside and outside deburrer for pipes and a hammer to drive in the legs – only these few tools are needed to integrate your equipment with CREFORM.
We recommend a simple commercially available vertical band saw to cut larger quantities of pipes. The pipes are very easy to cut because of the adequate wall thickness. | | |
 |
FIFO Rack
FIFO (First In First Out) racks are, because of their high capacity, ideal for use in small spaces. The single levels can be set to an ergonomically optimal height.
Whether in the store or installed – there is the right solution for every application. Equipped with castors, the racks can at any time be moved for cleaning or maintenance work. | | |
 |
Handcart
The transportation of parts from one manufacturing area to another does not necessitate higher effort or force. Our handcarts, consisting of CREFORM pipes and connectors, offer a maximum load carrying capacity, tractability and dimensional accuracy with respect to the required size and height.
They are a great alternative to lift trucks and forklifts, which occupy storage space in your manufacturing department. | | |
 |
Picking Trolleys
Picking trolleys are applicable for parts of almost any size. They can be easily furnished with a towing device to be transported by a hauler or other.
Large wheels made of rubber, polyamide, or polyurethane or ESD castors with protection against electrostatic charge allow for use on any floor and under all circumstances. If necessary, the trolley structure can also be reinforced for greater loads to a point, after which it will become too heavy itself. | | |
 |
Workbench
Productivity starts with ergonomically configured workbenches with comfortable part-feeder, individually correct and adjusted workbenches and good illumination of the work area.
Workbenches are designed as stationary or, with the appropriate locked castors, mobile. To protect sensitive electronic parts from static charges, ESD pipe and metal connectors are recommended. | | |
|
|
|
|
Crippa S.P.A.
|
|
 |
CA 516
The range of tube bending machines CA 316, CA 416, CA 516 introduces a true innovation in the whole sector of the bending machines for small diameter tubes. The entire range embodies the most recent technological developments in the use of the single components (axis control systems, linear slideways, etc.). Thanks to this, accuracy, performance and reliability have reached levels of absolute excellence.
| | |
 |
CA 516 REVERSE
The range of tube bending machines CA 316, CA 416, CA 516 reversed version, facilitates automatic tube unloading by gravity and introduces a true innovation in the whole sector of the bending machines for small diameter tubes. The entire range embodies the most recent technological developments in the use of the single components (axis control systems, linear slideways, etc.). Thanks to this, accuracy, performance and reliability have reached levels of absolute excellence | | |
 |
TRIDIMENSIONAL LASER MEASURING SYSTEM
LASER 3 is a machine specially designed for quick and accurate measurement of tubes, thus determining all their design parameters and preparing them for interfacing with the tube bending machines.
Measurement of bends with uniform radius and with variable radius, with automatic creation of the Crippa bending machine program.
Specification:
Measuring range mm: x=2000 y=1250 z=1200
Accuracy: +- 0.1mm / +-0.1°
Repeatability: +- 0.05mm / +- 0.05°
Weight: 500kg
Power supply: 220Vac 50/60 Hz
| | |
 |
tube bending machines.
tube bending machines. | | |
 |
TUBE END FORMING MACHINES CRIPPA - CA Series
Highly flexible CNC tube end forming machine with two controlled axes and 6 forming operations. Forming mandrel capacity, 8 Ton. Possibility of using fixtures with rotary tools for end-forming, thread-cutting or roll forming Extensive range of accessories Easy to integrate in production islands with loading and unloading systems | | |
 |
TUBE END FORMING MACHINES CRIPPA - PO Series
Automatic tube end forming machine with 2, 3 or 4 forming passes. Capacity of the forming mandrel 5 ton. User friendly Hydraulic operation Wide range of accessories Machine can be easily interfaced with production islands and with automatic loading/unloading systems. | | |
|
|
|
|
Cross Hüller GmbH
|
|
 |
Coldforming Technologies
Worldwide, MAG Powertrain Coldforming Machines are synonymous with top productivity, quality and reliability when it comes to the manufacturing of straight and angular serrations, oil grooves, threads, etc. Our unique experience enables us to provide you with the most economical solution to your specific production requirements.
MAG Powertrain is the leading manufacturer of coldforming machines and has all the Know How and technology in designing and manufacturing coldforming racks. They are made of wear resistant, hardened and ground cold worked steel.
| | |
 |
Connecting Rod Fracturing & Assembly
The traditional method of manufacturing connecting rods calls for machining the crankshaft and pin bore holes in the connecting rod, and then separating the rod and cap to facilitate installation on the crankshaft. This was a difficult operation requiring extremely high-precision machining to mate surfaces of the rod and cap.
The fracturing process pioneered by MAG Powertrain eliminates the complex machining required to achieve precision mating of the cap and rod. Instead, the cap is separated from the rod at a precisely predetermined position by fracturing. The separated faces remain unmachined, their rough surface finish ensuring perfect mating during subsequent connecting rod assembly. The degree of mating accuracy far exceeds that achieved using conventional techniques.
This technique:
Significantly reduces production costs
Minimizes connecting rod production floorspace
Reduces tooling, energy and repair costs
Is being continuously further developed by MAG Powertrain also for other products
Increases the strength of the connecting rod & cap joint. | | |
 |
Machining Centers
Agile manufacturing systems are characterized by high equipment availability with parallel production processes and also high workpiece flexibility. Agile manufacturing systems are combined out of following variations STAR 500 and XS 211, the SPECHT series and the XHC series - linear motor driven machines. | | |
 |
MAG Powertrain: Market leader in dry machining
In each production process, there are processing strategies that can be optimized. Especially here, valuable production time can be reduced and the piece costs can be lowered considerably. For this reason, MAG Powertrain is continuously working on new technologies to reduce or optimize processing times and quality. One example is the minimal lubrication technology. MAG Powertrain designed a new technology for minimal lubrication where the amount of the air-oil mixture can be reduced to a minimum. The air and the oil are sent directly through the spindle to exactly where the lubrication is needed. This drastically reduces the costs for lubricants.
Consumption of procedure-specific production materials
Practical example: 10 HSC centers in 3-shift mode (yearly consumption)
Wet machining
Dry machining
750,000 litres of water
500 litres of minimum quantity lubrication
30,000 litres of coolant
150,000 m³ compressed air
1,000 litres of chemical additives
60,000 EURO
7,500 EURO
| | |
 |
Multiple Technologies
This machine convinces by its vertical design and the work piece located on top, high technological flexibility, a multiple spindle design and an innovative drive concept. All axes are directly driven and, for the first time, linear motors, which have a considerable influence on the machine dynamics, are used for the X-axes for this machine series. The use of the patented triangular X-slide allows completely independent or parallel machining on smallest spaces. | | |
 |
Special Purpose Machines
Basically, MAG Powertrain is capable of building special equipment to meet any required scope of processing. Beyond this, we can call on special equipment series with which many processing requirements can already be met. | | |
 |
The XHC Machining Center Drive Concept
Use of linear motors results in:
High levels of machining accuracy
High speeds and acceleration reduce idle times
Minimize operational wear and tear for better reliability
The following limiting conditions apply with respect to numerous machining tasks in high-speed technology:
Cutting time is 30 to 50% of machine cycle time
Idle time is 50 to 70% of machine cycle time
Therefore the cutting times as well as the idle times - consisting of chip-to-chip-time and positioning times - have to be reduced. The MAG Powertrain solution:
Shortest possible cutting times due to high spindle performance and rotational acceleration
Shortest possible idle times due to highly dynamic rapid speed
Rapid speed rates: up to 120 m/min
Axis acceleration: up to 1.4 g
Broken tool detection while machine is cycling
Shortest chip-to-chip-time (2.6 s)
The MAG Powertrain philosophy of high-speed machining includes accomplishing shorter machining times with high levels of machine availability. This requires the use of machine components resistant to wear and tear:
Use of a gearless B-axis
Use of linear motors in lieu of ball screws
The use of linear motors means that conventional transfer elements, such as ball screws, transmissions or clutches, are no longer required. Intelligent, digital drive control units offer the following advantages:
High acceleration capability with high contour and positioning accuracy as no mechanical transfer elements are needed
High contour accuracy with high path speed due to sensitive interpolation and traction-error-free internal drive position regulation with cycle times of <0.5 ms
Since the drive contains no mechanical transfer components, machining can be done completely without backlash
High degree of speed with control and accuracy
High degree of load rigidity
Maintenance free operation as a result of the absence of components affected by wear
a Sensor built into the motor coils in the drive control unit monitors temperature and prevents overload damage
High resistance to crashes
Low force ripples improve surface finish
| | |
 |
TransferCenter XT
The TransferCenter XT combines the productivity of a transfer machine with the flexibility of a machining center. By mounting all of the tools in the work area, the TransferCenter XT achieves extremely short machining paths for minimum cycle times. A pick-up type clamping unit automatically locates the workpiece and then transfers it to the various machining stations.
| | |
|
|
|
|
Cryo Store BV
|
|
 |
c\temp™
c\temp™ is the revolutionary single use preprogrammed electronic temperature recorder developed by Marathon. | | |
 |
Long-term and distribution storage
Long-term and distribution storage | | |
 |
per straps
per straps | | |
 |
Storage at temperatures between ambient and −150°C
Storage at temperatures between ambient and −150°C | | |
|
|
|
|
CTI SYSTEMS S.A.
|
|
 |
CTI handling devices are employed to
Move heavy loads quickly and accurately through all axis
Feed and remove materials, products to and from machines, ovens, furnaces, presses
Schmitz Cargobull AG [2005]
The system consists of 1 chain conveyor, 1 lifters, 1 diagnostic station, 1 maintenance station and 10 carriers. The automatic assembly line starts in the preassembling department, where the different trailer chassis are lifted up to the chain conveyor at level 2. The buffer function of the chain conveyor synchronizes the cycle of the assembly line. The preassembled chassis is taken up by a passing carrier and via a lifter transported to the different assembly areas. The working height, as the rate of speed, is adjusted automatically to the different working areas. At the end of the assembly line an additional lifter takes up the empty carrier to level 2 where before starting a new cycle, a complete automatic function control is executed in the diagnostic station. Essential system data: 1 chain conveyor, 3 lifters, 1 diagnostic station, 1 traversing carriage and 10 carriers (capacity 6000 kg, lifting height ca. 2400 mm). The length of a two-level bi-rail system, CTI Patented track, comes to 400 m. Management System and control: the generation and coordination of the process flow is executed by a master PLC which transfers the fully adjustable parameters to the local carrier PLC at the beginning of a cycle. The design of the carriers and the whole system was executed under the rule, that work below suspended load is permitted.
| | |
 |
CTI offers the following crane systems
Overhead cranes
Traveling cranes
Automatic cranes
Process cranes
Interlocking systems
Benteler [2005]
The system consists of 2 double girder cranes, 1 handling station and 5 crossbeams. Benteler Steel/Tube Ltd. carries out the pickle of tubes in the Paderborn/Germany located plant. To update the standard of used equipment and safe the work quality in future, CTI delivered in 2005 a semi-automatic system for pickle tube bundles. The cranes have to transfer the tube bundles to the handling station. The automatic hook mounted crossbeam pick up the bundles by hand of the operator. The operator works with the crane up to a special position compared to the handling station. This position is checked by limit switches. Now the automatic process can start. The two lift carriers into transfer point and advance the boom to the pick up lug on the beam. The crane hoist moves and lays down the beam. The automatic hooks decouple. The crane can go away and the handling station starts the pickling program. Hand over back to the crane runs in reverse order.
| | |
 |
CTI offers the following floor conveying systems
Roller conveyors, heavy and duty conveyors, skid conveyors
Chain conveyors, special designed chain conveyors
Lifts
Closed chain conveyors
Belt conveyors
Shuttle systems
The system consists of approx. 160 m of new patented track and corresponding powerbars, 7 switches and a monorail control station. In 2004, CTI SYSTEMS realized an extension of an existing CTI monorail system, operational already for about 30 years at Corus’ Scunthorpe (UK) facility, in order to allow for direct automatic connection to the newly installed automated CTI warehouse and in order to adapt to various other modifications executed at the same time by Corus. The approximately 100 C-hook conveyors traveling on the monorail are transporting steel rod coils with a weight of up to 2.2 t, a diameter of up to 1,3 m and a length of up to 1.7 m. They pick up the coils individually at the wire rod mill and via the large monorail system, including some 40+ switches, they pass along compactors, cooling tracks, weighing stations, labeling stations, ... directly to the input area of the new automated warehouse. Here the coils arrive with a temperature of still up to 400°C and at a rate of 106 coils/h. Prior to being unloaded onto conveyors leading into the warehouse, a check of each individual coil is made by the new CTI monorail control station, realized at the same time than the connection to the warehouse, in order to exclude any entry of an unsuitable coil into the warehouse.
| | |
 |
Docking systems
The system consists of four (4) dock modules: 2 taildocks, left right one side equipped with the hoist, 2 windocks left right, 2 landing gear docks left right, 2 hydraulic docks left right. The dock can be used on the whole A320 family (A318 to the A 321). Equipped with numerous features the A320 dock modules successfully commissioned at Air France Paris in March 2007 allow aircraft access for heavy maintenance. The entire tail and wing sections are covered in most comfortable and ergonomic way for the entire A320 aircraft series (from the A318 to the A321). The passway and workplatforms at tail dock allow not only heavy duty application and high platform loads, but a | | |
 |
Monorail Systems
The system consists of approx. 160 m of new Tarca track and corresponding powerbars, 7 switches and a monorail control station.
In 2004, CTI SYSTEMS realized an extension of an existing CTI monorail system, operational already for about 30 years at Corus’ Scunthorpe (UK) facility, in order to allow for direct automatic connection to the newly installed automated CTI warehouse and in order to adapt to various other modifications executed at the same time by Corus. The approximately 100 C-hook conveyors traveling on the monorail are transporting steel rod coils with a weight of up to 2.2 t, a diameter of up to 1.3 m and a length of up to 1.7 m. They pick up the coils individually at the wire rod mill and via the large monorail system, including some 40+ switches, they pass along compactors, cooling tracks, weighing stations, labeling stations, ... directly to the input area of the new automated warehouse. Here the coils arrive with a temperature of still up to 400°C and at a rate of 106 coils/h. Prior to being unloaded onto conveyors leading into the warehouse, a check of each individual coil is made by the new CTI monorail control station, realized at the same time than the connection to the warehouse, in order to exclude any entry of an unsuitable coil into the warehouse.
| | |
 |
Teleplatforms
The system consists of 16 painting platforms and 20 double girder under-slung cranes. The painting facilities in Hamburg for the new A380 include a CTI teleplatform system. The system consists of 4 teleplatforms with a lift height of 23.5 meters to access the fin, 12 teleplatforms with a lift height of 11.5 meters to access the upper surface of fuselage and wings and 20 double girder under-slung cranes which are installed in two identical halls. The system additionally includes cross-over systems which allow the transfer of the fuselage teleplatforms between the fuselage and wing cranes. The max load per teleplatform is 4 people plus additional load of 280kg. The proven square mast system could be optimized in terms of proper weight and stiffness. The safety of the operator is guaranteed with a selection of systems which include among others fall protection systems, evacuation system and respiratory air treatment on platform level. CTI Systems S.A. included as first manufacturer worldwide the newly developed relative motion control system in reference to the actual platform position. The platform motion direction follows the pre-selected joystick direction from the operator. This new system reduces due to its simple use the risk of operating errors.
| | |
|
|
|
|
CTU Conzepte Technik Umwelt AG
|
|
 |
inside partly loaded catalytic converter
inside partly loaded catalytic converter | | |
 |
flue gas cleaning
flue gas cleaning | | |
 |
hazardous waste treatment
hazardous waste treatment | | |
 |
Renewable energies
Biomass consists to a large extent of carbon. Carbon is formed by photosynthesis from atmospheric carbon dioxide and is incorporated in the biomass. The increased use of such biomass within a sustainable agriculture, forest and waste management scheme is one of today's most important eco-political targets.
Reduction of combustion of fossile fuels has the highest priority. Increased use of biomass largely contributes to climatic protection and to the sustainable development of rural areas. Renewable energies become more and more important which, in our area, are mainly wood, energy crops and biowaste.
CTU is world-wide licensee of the KOMPOGAS technology for production of biogas from biowastes and energy crops.
CTU builds wood gasification plants in cooperation with PYROFORCE who are the supplier of the gasifyer.
| | |
 |
Thermal Oxidation
Do you have solids, liquids, sludge and/or off-gases, which need thermal destruction? Then you are right with CTU!
Our hazwaste combustion systems may be designed for a wide range of hazardous wastes as generated e.g. from chemical production. Our extensive know-how in the field of combustion and flue gas cleaning technologies enables us to design and build plants for difficult wastes, with high concentrations of contaminants such as chlorine, bromine, sulfur, nitrogen or phosphorus. If feasible, heat as well as by-products such as HCl or HBr can be recovered.
Hence we offer complete and sustainable solutions focussing on recycling and recovery for the end of each process chain.
Our technologies include rotary kilns, combustion chambers and others. Thermal capacities typically range from 1 to 30 MW.
More than 25 CTU hazwaste combustion plants are in operation around the world
| | |
|
|
|
|
COVENTRY TOOLHOLDERS LTD
|
|
 |
AUTOMATED HYDRAULIC
AUTOMATED HYDRAULIC | | |
 |
EASY CHANGE
EASY CHANGE | | |
 |
HEAT SHRINK
HEAT SHRINK | | |
 |
HSK
HSK | | |
 |
SPECIAL TOOLHOLDERS
SPECIAL TOOLHOLDERS | | |
 |
STANDARD HYDRAULIC
STANDARD HYDRAULIC | | |
 |
STEEP TAPER
STEEP TAPER | | |
 |
STRAIGHT SHANK
STRAIGHT SHANK | | |
|
|
|
|
COSTA machinery GmbH
|
|
 |
Warehouse 1
used machinery | | |
 |
Warehouse 2
Warehouse 2 | | |
|
|
|
|
CompAir UK Ltd
|
|
 |
screw compressors
screw compressors | | |
 |
vane compressors
vane compressors | | |
 |
Construction Air Tools
CT3 to CT125 - 3 to 42.5 kg
CompAir's comprehensive range of air tools provide the correct tool for the application, be it chipping hammers for light duty demolition work, hammer drills capable of drilling the hardest concrete or pneumatic breakers for heavy duty applications.
Continuing investment in the latest design of manufacturing tools and rigorous implementation of ISO 9002 approved quality systems ensures you take delivery of a high quality reliable product.
Simplicity and Reliability
The range of tools, while delivering harder hitting power require less maintenance and parts.
Major body parts are machined on the latest CNC equipment to precise manufacturing tolerances from drop forged alloy steel. The resulting reliability and durability ensure that CompAir tools have many years of trouble free operation.
Maximum operator protection
Vibration reduced models prevent as much as 85% of vibrations from being transmitted from the tool to the user, providing protection from such hazards as vibration white finger. These lightweight machines have been designed to withstand the extreme demands of the plant hire industry.
Legislation and guidelines
On the 25th June 2002, Directive 2002/44/EC on the minimum health and safety requirements regarding the exposure of workers to the risks arising from physical agents (vibration) was published in the official Journal of the European Communities.
This directive specifies an action level of 2.5 m/s2 and a limit level of 5 m/s2 for each other hand arm vibration exposure, based on the sum of 3-axes vibration - often referred to as 'root-sum-of-squares','rss' or 'vector sum' and came into force throughout the EEC from 6th July 2005. | | |
 |
Hydrovane Compressors
Rotary Vane Compressors
Hydrovane is a dedicated business that is part of the CompAir group. It has it's own dedicated website www.hydrovane.co.uk with more specific information about the business and up to date news.
Please also see the website for your local Hydrovane sales and service provider.
The company is situated at Redditch in the UK - and has been manufacturing compressors there since the 1960s. | | |
 |
piston compressors
piston compressors | | |
|
| |
