|
|
|
Binder
|
|
 |
compact glass processing
compact glass processing | | |
 |
criterion plus
criterion plus | | |
|
|
|
|
BOHNACKER AG
|
|
 |
Automated bending presses and press brakes
Automated press is a hydraulic press brake with programmed automated device of changing the tools. It provides the high productivity, flexibility of production process and permanent accuracy. | | |
 |
Automatization and system equipment
Special solutions for any posed problem
Press brakes GWF MENGELE reach its maximum efficiency in combination with technology of atomization in the systems of equipment/ owing to its combination it is possible to increase the economic load of machine. Send us your detailed concept of necessary equipment and formulate your task. We will be glad to consult you and will help to find customized solution in close accordance to your requirements.
| | |
 |
Automatization and system equipment
Useful accessories, providing the significant efficiency
--------------------------------------------------------------------------------
Special solutions for any posed problem
Press brakes GWF MENGELE reach its maximum efficiency in combination with technology of atomization in the systems of equipment/ owing to its combination it is possible to increase the economic load of machine. Send us your detailed concept of necessary equipment and formulate your task. We will be glad to consult you and will help to find customized solution in close accordance to your requirements.
Advantages of automatization
Saving of auxiliary work time
processing part, even complicated due to the several different radii and edges, can be processed till the completed part without any additional operations.
Saving of the set-up times
set-up times (during the often readjustment of the equipment) becomes unnecessary in the case of small, often repeated series.
Place saving
Lack of intermediate storage of parts during the processing. This saves place in the zone of machine installation.
Improved production quality
Programming production process, spoilage is detected from the first part.
Decreasing of production expenses
Saved production time improves productivity.
Increased efficiency
Efficient production of the necessary number of parts, absence of excess storage expenses, money is not spent to the storage expenses, that allow saving of interest rates.
Accessories facilitate the production process
Electronic CNC-unit with graphic user’s manual
Automated rear support with programming adjustment of pins on then height (axis R) + side adjustment (axis Z)
Front console with height adjustment by means of fly-wheel or automatically
Front support, programming auxiliary bending devices
Device for making convex form , with control board and hydraulic clamping fixation of a die
Increased working speed, larger table
Increase mounting height for large-format equipment
Possibility of servicing by several operators (2nd adjusting column)
Light lock
Hydraulic clamping fixation of punch for the 2nd punch
Production of profiles with a shell by means of robots
Here the bodies with shells, having 12 edges for partitions in the lavatories are produced automatically.
GWF MENGELE press brake equipped by the robot, completely automated, with control board, with the function of feeding and stacking by means of robot, automated press for nuts punching, press force is 1600 kN, length up to 4000 mm.
| | |
 |
Bending Presses
Machines of the oldest German manufacturer of hydraulic bending presses and press brakes prove due to their accuracy and efficiency.
Stable: High quality welded monolithic steel construction guarantees the long service life. Complex production and assembly of machines at the main plant in Waldstenn (Gunzburg).
Accurate: Precision machines with the system of accurate adjustment and control system and the device of microprocessor control.
Handy to operate: Easy and quick change of operational tools of all types of equipment. Easy accessibility. Very low level of noise. The modern devices of parallel CNC-control.
Reliable: first-class system of quality control. Careful assembly and documentation preparation. Optimal correspondence to the specifications for production, required by the customer.
| | |
 |
GWF MENGELE Sheet metal shears
Sheet metal shears for wide range of application
Hydraulic Sheet metal shears of company GWF MENGELE meet the high requirements of metal-working industry: productivity, cutting quality and efficiency. Accuracy is the most important criteria. Solid monolithic construction and simplicity and reliability in usage provide the long service life. Sheet metal shears GWF suit perfectly to the effective processing of various types of sheet metal of different thickness due to the quick adjustment of cutting clearance.
Aggregate system provides the optimal coordination and maximum efficiency:
Well thought aggregate system GWF MENGELE and production equipment makes serial production with the compliance with the particular clients’ requirements possible. As a result we can produce the machines, that are adjusted before the shipping according to the individual requirements of the clients with a very good ration of price and quality and in the shortest term of delivery.
| | |
|
|
|
|
Bollé Safety
|
|
 |
Electric arc welding without protection is harmful
Our line of products is entirely researched and designed to meet the requirements of prevailing standards, your comfort and aesthetic appeal.
Active welding filters provide continuous protection against UV/IR emissions, heat, sparks and projectiles. The degree of protection provided by the filter is designed to avoid blinding by the electric arc.
When an electric arc is activated, active welding filters darken automatically. When the arc is extinguished, they go back to their initial transparent state. Thus, active welding filters free up both of the welder’s hands, which saves time, helps avoid fatigue and ensures much better quality, because the arc can be positioned more accurately.
Welding methods :
Amperes
Covered electrodes
MIG steel
MIG light metals leg
TIG wig
MAG
Arc-Air gouging
Plasma cutting
Micro plasma welding | | |
 |
LASER PROTECTION
Manufactured in polycarbonate, the range of Bollé laser filters combines lightness with reliability and is offered at an attractive price.
This range has CE approval to European Standards 207 and 208 and confoms to standard IEC 825.
With their simple, attractive design, Bollé protective spectacles are a synonym for aesthetics and comfort. | | |
 |
Safety glasses
Bollé Safety caters to all markets where it is most needed, including industry, public works, construction, aeronautics and the military, all the time supplying products that comply with the most stringent European standards. | | |
 |
SQUALE LASER
Fully moulded from the requisite filter material, this eyeshield also fits over most spectacles.
Offering all-round protection and ease of vision, the indirect side air vents provide efficient vetilation.
Weight : 44 g | | |
|
|
|
|
BOMAFA Armaturen Gmbh
|
|
 |
Medium controlled recirculation valve
The application of the medium controlled re-circulation valve is to protect the pump against
damage during low load. Automatically the bypass opens when the flow through the pump
reaches a minimum flow. The medium will be bypassed to prevent the condensate from heating up, which would lead to cavitation. Therefore, the minimum flow valve has the function of a pump safety valve. | | |
 |
safety control valve
safety control valve | | |
 |
steam conversion valves
steam conversion valves | | |
 |
valves of the turbine area
valves of the turbine area. | | |
|
|
|
|
New Borel SA
|
|
 |
Annealing furnace
Chamber furnace 3 doors from 50 liters to 1000 liters | | |
 |
Chamber furnace
Chamber furnaces 1250° c
Standard product range from 50 to 1000 liters. | | |
 |
Drying oven
Drying oven | | |
 |
Retort furnace
Technical data :
Types : 4,5/650S 17/650M 48/650L
Max. temperature : 650°C 650°C 650°C
Frequency: 50Hz 50Hz 50Hz
Voltage : 3x400V 3x400V 3x400V
Power : 3,5 kW 6 kW 9 kW
Weight of the furnace : 120 kg 280 kg 450 kg
Useful dimensions Ø95 mm Ø140 mm Ø250 mm
of the retort H 200 mm H 300 mm H 400 mm
Useful dimensions Ø 150 mm Ø 250 mm Ø 350 mm
of the furnace : H 250 mm H 350 mm H 500 mm
External dimensions : W 600mm W 690mm W 840mm
(±10%) H 940mm H 1100mm H 1400mm
D 700mm D 790mm D 945mm
Equipment :
- Metallic casing containing the insulated ceramic fibre (according to directive 97/69/EC).
- Heating by cartrige heaters.
- Inner parts of the furnace made in stainless steel.
- Turbine for air convection integrated at the bottom of the furnace.
- Digital temperature control unit (sizes 17/650M and 48/650L are equipped with a system of temperature control by cascade, master/slave).
- Rack for 2 retorts mounted at the side of the furnace.
- Retorts with turbine for gas circulation (for sizes 17/650M and 48/650L). | | |
|
|
|
|
Born AG, Peter
|
|
 |
Combi-system KS
Binding – Banderoling – Labeling in one machine with one pallet-stop.
Advantage for bornbinder® customers: the existing bornbinder® HB can be used.
Twine in the upper area for the pallet-securing.
Banderole in the lower area for the labeling after EAN-128.
Foil jig welding: the welding parameters are continuously adjustable. Also by very different ambient conditions there is a constantly safe welding. Because of that there is a very high availability and security. | | |
 |
Foil-Banding Machine FB
In the course of passing through the banding machine, one or two foil bands are wrapped around the goods being packaged. In the lower area, the foil place at a variable height wich is product-specific.
The tension of the foil is uniformly adjustable so that very different types of packed goods can be banded with foil. Differing widths and strengths of foil enable the banding roll to matched precisely to the product.
Band roll width: 100 - 250 mm, foil thickniss: 35 - 90 µm
| | |
 |
Packageing solutions
Unpacking, emptying and depalletizing machines
Strapping and banding machines
labeling machines
Shrinking equipment | | |
 |
Pallet-Destrapper PaE
With the automatic twine- or strapremover on palletized goods you will save time, money and trouble.
Remove fully automatic twine or strap on horizontal binded or strapped palletized goods - on all kinds of palletized goods.
The automatic twine- or strapremover has a ridgeless height- and transverse adjustment and can so be adjusted to any stacket height and width of loaded pallets. The automatic removed twine or strap will fall into a box.
The automatic twine- or strapremover as well as its control is fitted so, that the addition is possible on any conveyor way. | | |
 |
Pallet-Labeling System PES
Pallet security with simultaneous labelling using normal paper in size A5. New, the label will be put onto the twine without clips.
Strongly risen PE-Foil and the big Foil-Quantities of waste by the trade will make the new designed Pallet-Labelling-System LH 05 very interesting for the beverage industry with reusable goods.
| | |
 |
Pallet-Stretcher
With pressure-sensitive, lightweight and unstable loads, it is especially important that the force exercised on the pallet load during the wrapping process be low from the first to the last winding and, above all, that it remain constant. This is possible thanks to the digital tension-control. Therefore, lightweight loads can also be wrapped without the use of a pressure plate | | |
 |
Pallet-Tyer HB
Adequate loading safety saves time, money and trouble, can also be used for the return transport of the empties without untying the knot.
Horizontally ties the palletized goods fully automatic. The binding machine has a ridgeless height-adjustment and can be adjusted to any stacket height of loaded pallets.
The pallet binder as well as its control is fitted as the addition is possible on any conveyor way. The handling of the machine is very simple. Little maintenance. Perfect service and full guarantee without obligation to buy string. CE tested. | | |
|
|
|
|
Borrmann Brenner Berlin GmbH
|
|
 |
Gas burners
Gas burners | | |
 |
Gas fittings
Gas fittings | | |
 |
hoses.
high pressure hoses | | |
 |
Thermocouples
Thermocouples | | |
|
|
|
|
Bosch Packaging Technology
|
|
 |
Belt conveyor
Transver
| | |
 |
Belt conveyor with defective part
Belt conveyor with defective part eliminating system | | |
 |
Capper
Capper | | |
 |
Cartoner
Cartoner
| | |
 |
Pouch packaging machine
Sigpack systems | | |
|
|
|
|
Bosch Rexroth AG
|
|
 |
Ball Screw Assemblies
Rexroth Ball Screw Assemblies do not only work with greater levels of accuracy and at higher speeds they can also be supplied at very short notice.
A wide range of precision screws and preloaded or adjustable-preload single and double nuts is available for all feeding, positioning and conveying tasks.
Rexroth ball screw drives are the crucial components in the AOK/AGK drive units as well as in the new Electromechanical Cylinder EMC.
Please note also the eLINE Programme with pre-assembled ball screws ex stock.
NEW: Completely machined Ball Screw Assembly with front lubrication unit
Please use our Selection Guide to identify the right product | | |
 |
Ball Transfer Units
Rexroth ball transfer units allow unit loads to be pushed, turned and steered with ease. They have been fully tried and tested as key modules of conveyor and feed systems, machining units and packing lines. | | |
 |
Cam Roller Guides
Rexroth Cam Roller Guides have been specially developed for use in materials handling and automation technology applications.
They stand out thanks to their high permitted maximum speeds, compact design, extremely low weight, simple installation and low friction.
Their extremely quiet running performance represents yet another advantage.
The user can obtain each element as an individual item, if required. | | |
 |
Hydraulic motors
Hydraulic motors | | |
 |
Ready-to-mount Linear Motion Systems
Designed for a wide range of applications running from materials handling technology to light-duty machining jobs in the aluminum, wood and plastics sectors Rexroth offers its ready-to-mount Linear Motion Systems with a variety of drive configurations and control systems.
Our product range of Linear Motion Systems:
- Linear Motion Slides
- Linear Modules
- Compact Modules
- eLINE Compact Modules
- Precision Modules
- Bridge Modules
- Feed Modules
- Ball Rail Tables
- Controllers, Motors, Accessories
- Linear Actuators
Multiple Axis Motion Systems CMS
These standardized, harmonized axis systems that are preset at source save users a tremendous amount of development and start-up effort.
3D CAD Drawing Generator
| | |
 |
Roller Rail Systems
Our roller rail systems allow you to move even the heaviest loads with a minimum of effort all with the design-based rigidity and resulting precision that users of high-performance machine tools and robots require. Our roller rail systems are available in a range of different accuracy specifications.
See below for two shining examples of how Rexroth stands for innovation. Contact our Sales Department for details of Rexroths new technologies and products.
Heavy-duty size 100 and 125 roller rail systems
Rexroth’s size 100 and 125 roller rail systems featuring an antifriction-bearing design are designed for heavy-machinery applications. Click here for more information.
Profiled Rail Systems for Cast Mineral Mounting Surfaces
Roller rail systems with integrated measuring system
The integrated measuring system for ball rail and roller rail systems consists consists of a scanner (with the AMOSIN Measuring Principle) with sensor system pinned to the runner block and a steel scale built into the rail. Machine malfunctions are thus kept to a minimum.
Click here for more information.
| | |
 |
Solenoid valves
Solenoid valves | | |
 |
Solenoid valves
Solenoid valves | | |
|
|
|
|
BP-Korea Inc.
|
|
 |
Drilling Tools B1-3D
Drilling Tools B1-3D | | |
 |
Milling Cutting Tools
Milling Cutting Tools | | |
|
|
|
|
BR TECHNOLOGIES
|
|
 |
Foil winding machine
Foil winding machine FWM for foil width up to 1.600 mm | | |
 |
layer winding machines
Semi- and fully-automatic layer winding machines AM with automatic insulation inserter | | |
 |
manual vertical winding machine
The manual vertical winding machine for "heavy electro". Available in ground level execution (Floor type F) or pit type (Under floor type U) execution for power transformer coils up to 25 tons coil weight. | | |
 |
Universal winding machine
Universal winding machine WM for coil weights up to 25 tons | | |
|
|
|
|
Bradbury International UK Ltd.
|
|
 |
Portable Rollforming Equipment
Bradbury Portable Rollforming Equipment
Newly designed, the Bradbury Portable Rollformer features integrated technology offering mastic application, multi-batch controller, and 100-fpm production. Produce in-plant-quality parts on the jobsite. | | |
 |
Roll Tooling
Our tooling engineers work closely with our test technicians to produce low-maintenance high-performance tooling. Bradbury roll sets typically have a higher profiled tool count and larger average diameter than competing products to provide improved forming angles and longer tool life. | | |
 |
rollforming equipment
Bradbury rollforming equipment and systems are engineered and built to provide unequalled performance and durability. The company has been manufacturing rollforming machinery since 1959 and holds design patents that give Bradbury customers productive technological advantages. | | |
 |
Telescopic™ Rollformers
Telescopic™ Rollformers
Bradbury’s Telescopic™ Rollformers have a through-arbor design that increases stability over cantilevered arbors and provides strength superior to duplex mills for forming heavy gauges and demanding sections. | | |
|
|
|
|
Brambati SpA
|
|
 |
Coffee
coffee and similar products (hazel-nuts, pea-nuts, almonds, etc.) processing plant | | |
 |
Confectionery
Confectionery
raw materials handling, storage and dosing plant for confectionery industry (snack, corn-flakes, sugar, candies, ice-creams and sweet in general) | | |
 |
Pasta.
raw materials and finished products handling and dosing plant for pasta, cous-cous, baby-food and pet-food | | |
 |
Plastic
powder and granules raw materials handling and dosing plant for plastic, rubber, carbon-black and similar industries | | |
|
|
|
|
Boehringer Werkzeugmaschinen GmbH
|
|
 |
cnc turning machines
cnc turning machines | | |
 |
DUE-series
High-precision, progressive, user-friendly, safe and authentic VDF-quality -
These are the properties of the conventional lathes of the VDF-DUE-series.
Highlights
Highest precision and cutting performance
Unique quality and precision in manufacturing
Additional equipment options for special machining operations make these machines flexible and extremely economical. | | |
 |
HTC series
Machining parts for the automotive industry requires high precision, which can be achieved by using HTC-series machines in your manufacturing. Our automated machines provide the productivity to place your manufacturing in the "pole position."
First Class Working Environment
Even though the footprint of the turning center is compact, the HTC has an impressive range of chucking capabilities, and a generous spindle bore for large bar work. The large capacity and small footprint are especially valuable in manufacturing with limited floor space. Additionally, fast indexing and traverse rates reduce chip-to-chip time.
Rigidity – One-piece, Cast Iron Slanted Bed
The 45° slanted bed uses cast iron for rigidity, heavier cuts and faster production. With virtually no vibrations, this means higher surface finish – even on hard materials.
High Precision with Linear Scales
Our standard linear scale on the X-axis ensures exceptional accuracy and consistency.
Flexibility
In addition to the well-equipped standard machine, a large range of options enhances the flexibility of your lathe.
Standard VDI Tooling
All HTCs use international standard VDI tooling.
| | |
 |
NG series
The new Boehringer NG series. Turning instead of waiting.
Now it is even easier to save costs during turning and at
the same time to achieve MAG Boehringer quality: with the new
generation Boehringer NG series. It offers high technological
and organizational availability, service and maintenance
friendliness and a high degree of adaptation and use flexibility. Thanks to its modular construction system you only
pay for that which you actually need.
| | |
 |
VDF C series
The CNC turning machines of the VDF C series are universally usable and
achieve high productivity progress because they permit the use
of cost reducing technologies:
Hard maching instead of grinding
Maximum depths of cut
Machining very long and very heavy work pieces
Complete machining in four axes
Milling, boring, and turn-turnbroaching | | |
 |
vertical turning center
vertical turning center | | |
|
|
|
|
Boehlerit GmbH & Co. KG
|
|
 |
steel industry tooling
steel industry tooling | | |
 |
automotive tooling technolgy
automotive tooling technolgy | | |
 |
chipless forming and wear protection
chipless forming and wear protection | | |
|
|
|
|
BMH Enviro
|
|
 |
Environmental Technology, Heavy-duty Industrial Waste Processes
Multipurpose Plants
• Waste-to-Fuel Systems for preparation of refuse derived fuel (RDF)
• Recovery of raw materials for reuse
• Pretreatment for composting
• Scrap tyre shredding
• Volume reduction of low level radioactive waste for final disposal | | |
 |
Multipurpose Plants
* Waste-to-Fuel Systems for preparation of refuse derived fuel (RDF)
* Recovery of raw materials for reuse
* Pretreatment for composting
* Scrap tyre shredding
* Volume reduction of low level radioactive waste for final disposal
| | |
|
|
|
|
Bircher Reglomat AG
|
|
 |
contact mats
contact mats | | |
 |
electric satety edges
electric satety edges | | |
 |
Passive infrared detectors
Passive infrared forms a heat image of the defined area. When the PIR sensor detects a temperature difference in motion, a switching operation is triggered.
Thanks to this technology PIR-motion detectors are ideal opening sensors for automatic door systems such as sliding doors, revolving doors and industrial gate systems used only for pedestrian traffic. | | |
 |
Pressure wave sensors
The pressure wave technique is mainly used as entrapment protection on public transportation doors and generally as door opening system.
Additional applications are in the sanitary area.
| | |
 |
Signal Transmission
INTRA transfers inductive signals from one or multiple Bircher SafeTecâ sensing edges to an electronic unit for evaluation. The redundant evaluation meets the requirements of the German standard ZH1/494 for doors and gates.
The main advantage of INTRA is the capability to monitor sensing edges without mechanical or direct electrical connections between the stationary and moving part of a sliding gate. Compared to conventional sensing edge signal transmission via trailing cable, the INTRA system is virtually maintenance free. | | |
 |
Time relays
Time relays are switchgears, which delay or limit received instruction temporally. Time relays are applied in mini control systems and in domestic technique.
| | |
|
|
|
|
Bitzer GmbH
|
|
 |
Belt weighers and solids flow meters
For an individual offer we need following constructional information:
Belt width (mm)
Belt slope (degree)
Material accuracy (%)
Carrying capacity (t/h)
Belt velocity (m/s) | | |
 |
Big Bag Filling machines
Big Bag Filling machines | | |
 |
BITZER Software Solutions
Since 1980 our own software department has been developing programs for different areas in the field of industrial weighing and dosing technology.
Our programs are applicable in multifarious ways:
The solutions comprise user-friendly handlings of seperate scales as well as complex weighing systems integrating corresponding peripheral devices for the automation of sequences. In this way, it is possible to realise self-service weighing and loading systems that are legal for trade.
Up-to-date software engineering helps us develop our WINDOWS-based, related to practice programs. Our overall aim is to offer user-friendly programs with clearly arranged handlings to our customers.
Due to client/server architecture all programs allow multiuser systems.
The centric, high-performance SQL-database (Oracle) provides highest data security.
Standardized interfaces, e.g. to Merchandise Information Systems (e.g. SAP/R3), are available.
Furthermore, we are able to realise „Network weighing” (legal for trade) as well as web-based applications.
| | |
 |
Container scales
Container scales | | |
 |
Conveyor belt scales
Conveyor belt scales | | |
 |
Weighbridge - Pitless Type
Legal for trade
Designed for on-coming and side-coming traffic at high frequency
Weighbridge, foundation and load cells are plant-assembled and delivered all in one piece
Easily relocatable and therefore suitable for short-term use, e.g. on construction sites
Maintenance-free load cells and bearings
No mechanical wear parts
Minimized costs for ground- and roadwork
Track height 39 cm
Optional side curbs on weighbridge
Lightning protection measures available
Strip foundation and ramps on demand | | |
 |
weighbridges
Vehicle weighbridges | | |
 |
Weighers
Wheel load weighers | | |
|
|
|
|
BLEICHERT Förderanlagen GmbH
|
|
 |
ACCUMULATING PALLET CONVEYOR
ACCUMULATING PALLET CONVEYOR
| | |
 |
Axle / Suspension Assembly line
Axle / Suspension Assembly line
| | |
 |
INDEXING SLAT CONVEYOR
INDEXING SLAT CONVEYOR | | |
 |
montamatic® 100HM
Instrument Panel Sub-Assembly. Carriers decell and stop via track cams. Carriers automatically queue up behind each other. Operator release pushbuttons are directly on carrier.
| | |
 |
montamatic® 250HK, 500HK
550 lbs. or 1,100 lbs. capacity, side-running style for transmission assembly. Operator has access to all sides and bottom of workpiece.
| | |
 |
montamatic® 500M
1,100 lbs. capacity. Engine dress system shown with turntable transfer at intersection | | |
|
|
|
|
BlitzRotary GmbH
|
|
 |
compressed air technology
compressed air technology | | |
 |
lifting technology
Material Handling , lifting technology | | |
|
|
|
|
BLM GROUP UK LTD
|
|
 |
CM601 - Cold saws for short length tube/pipe
ADIGE's fifty years experience and leadership in pipe cold saw systems is associated with lower labour requirements, cut lengths to higher tolerances and cost effective investments.
Cold saw cutting technology for pipe, solid bars and profiles
offer higher performances and advantages compared to conventional ones (like band saws, etc.). Consistent accuracy and precision, higher squareness and cutting quality, higher productivity and reduced bar scrap.
All ADIGE cold saw equipment can be supplied with special configurations to meet customer's need. | | |
 |
CNC tube and solid bar sawing and machining centre
The CM502 CNC tube sawing and machining centre has a capacity of O.D. 12 to 102mm on a workable piece length of up to 650mm.
It is a CNC programmable and fully integrated manufacturing system which takes random stock length of solid bar and tube, cuts it to length , then simultaneously machines both ends, in-line measuring and final components unloading | | |
 |
Combined sheet and tube laser system - Laser cutting technology
ADILAS combines the advantages of laser cutting technology for sheet metal and tubes into one system capable of changing configuration in three minutes.
Main features:
same features of ADILAS-TUBE
on demand solutions for large size (3000 x 6000mm and 3000 x 8000mm) for precision cutting of large pieces with optimised cycle times
suitable to cut plate and profile
suitable for unmanned three-shifts a day
configuration changeover in les than 3 minutes
ADIGE SYS also provides on demand solutions according to customers specifications. Contact us! | | |
 |
DYNAM 2/3 - cnc tube bending machine
CNC tube bending machine with 3D Interactive Graphic Programming
| | |
 |
End forming machines
Machine with four working stations, either fixed or rotary, suitable for the following operations:
End forming, only
Machining, facing, rolling, swaging and trimming, minimising finishing operations with a two-speed additional rotary device.
Automatic "head-tail" end-forming cycle with auto loader
Automatic loading and unloading devices increase quality and consistency.
The DNC control unit programmes the two axes of the machine for maximum efficiency without requiring manual adjustments. | | |
 |
LT823D - laser tube cuting system
The LT823D Laser Tube Cutting System combines both straight and beveled edges - non orthogonal operations - (programmable tilting head up to 45°) with unparalleled speed and efficiency.
This fully programmable function, is particularly suitable when cut components have to be perfectly joined or when assembly operations include brazing, or other systems of welding without defacing the material.
The LT823D Laser Tube Cutting System offers the highest productivity available on the market with a with a unique level of flexibility and automatic adjustments .This feature makes it suitable for both small batches or large runs.
With capacities up to 152mm diameter and maximum lengths up to either 6500mm or 8500mm, (on demand) the LT823D laser cutting system has the following special features:
20% increase in productivity
fully CNC programmable adjustments
changeovers in less than 3 minutes
technological database for tubular components based on thousands of on filed applications
fast programming: from design to finished part in less than 10 minutes with unskilled operators
fully automatic bar handling from bundle including measuring, feeding, cutting and unloading
minimum bar waste
Standard CAD-CAM software control packages specifically designed by ADIGE for single and assembled tube programming allow extremely high exploitation of the system. The non orthogonal cutting process is also automatically programmed.
The LT823D Laser Tube Cutting System can also be supplied with:
weld seam detector
control device for enhanced piercing
unloading system with lengths of 3500-4500-6500mm
separation and collection of different lengths
ADIGE also develops customized solutions to meet customer specific requirements | | |
|
|
|
|
BLOHM MASCHINENBAU GmbH
|
|
 |
CNC grinding center
CNC grinding center | | |
 |
CNC surface grinding machine
CNC surface grinding machine | | |
 |
Horizontal two-spindle profile grinding machine
Horizontal two-spindle profile grinding machine | | |
 |
Production grinding machine
Production grinding machine | | |
 |
Profile grinding machine
Profile grinding machine | | |
 |
Rotary table surface grinding machine
Rotary table surface grinding machine | | |
|
|
|
|
Blue-I Water Technologies Ltd
|
|
 |
HG - 602 high Chlorine
The perfect fit for your applications requiring chlorine monitoring and control:
Fruit and Vegetable Washing
Food Processing
Clean-in-Place (CIP) Processes
Paper Production
Textiles
And Many More Industrial Processes
Up to 6 parameters in one
Optional Parameters
- Free Chlorine - AMP up to 200 PPM
- Conductivity
- Turbidity
- pH
- ORP
- D.O
- Flow rate
Inputs/Outputs
Up to 8 analog 4 – 20 [mA] outputs
Up to 6 output relays
Up to 2 analog 4 -20 mA inputs
RS 485 Comm
For Wall mounting
| | |
 |
HydroGuard Water Quality Analyzers
HydroGuard Water Quality Analyzers from Blue I Technologies provide state of the art analysis and quality control that you can count on.
Cutting Edge Technology
Colorimetric measurement of chlorine is the industry and laboratory standard, but analyzers based on this method tend to be expensive and difficult to maintain. Based on years of experience in the field, Blue I has pioneered an optimized implementation of the colorimetric measuring process that features long-term reliability and low maintenance.
→ Colorimetric Calibration free chlorine analyzers
→ Accurate, consistent readings (+/- 5%)
→ Consume VERY little reagents (~0.03mL/sample)
→ Self zero before each reading
→ Self-Cleaning Photocell
→ Measurement : 0-10 ppm
→ Measurement Interval: 2 to 10 minutes
→ Patents Pending:
→ ARM™ – Active Regent Mixer
→ ASC™ - Automatic Self Cleaning
→ Internal Architecture of Bus Configuration
→ Modular Design allowing for simple customization and field upgrades
→ Multi parameter system
→ Up to 8 parameters
→ Free and Total chlorine in one unit
Electronics
→ IP-65 Rated Enclosures (NEMA 4 equivalent)
→ Electronics - SMT Technology
→ Separate boards for simple, fast & cost effective maintenance
→ Removable terminal blocks for fast connections
→ Minimum down-time for maintenance and repairs
| | |
|
|
|
|
BluePrint Automation B.V.
|
|
 |
integrated case erector
Carton erectors and Case erectors | | |
 |
Swing Machine
Swing Machine | | |
|
|
|
|
Bluhm Systeme GmbH
|
|
 |
laser control
laser control | | |
|
|
|
|
Blum-Novotest GmbH
|
|
 |
2D Production Measuring Machine
2D Production Measuring Machine | | |
 |
Division Measuring and Testing Technology
In order to secure your economic advantage by a continuously high product quality, Blum, as leading European manufacturer of high precision production measuring and testing systems, offers customized solutions for a wide range of applications, as e.g.:
Brake discs
Brake drums
Wheel hubs (Cars)
Wheel hubs (HGV)
Differential housings
Shafts
Torque converter components
Gear wheels
Steering knuckles
Rotors
Balance wheels
etc.
Your decisive benefits with Blum
Permanent assurance of your product quality and productivity at the highest level
Systems with outstanding availability, precision and durability
Minimum maintenance requirement
Highest efficiency
Sound expertise and advice due to decades of practical experience
Highly qualified service staff
Measuring, testing, handling: turnkey solutions from a single source of supply
Integration of market leading testing technologies (Eddy Current crack testing, etc.)
Individually adapted special solutions
The synergy of solid engineering, sound practical know-how and decades of integration experience offer you all from one hand: From size and geometric inspection (incl. shape and positional tolerances) with temperature-compensated evaluation, feedback of compensation values (to the machine tool control) and part classification, via non destructive testing (e.g. for cracks, hardness, conductivity, etc.), marking and sorting of parts, up to the material handling and automation of entire cells or lines.
| | |
 |
Division Measuring Components
Innovative Technology for Productivity and Precision
With our division 'Measuring Components' we are technology leaders for tactile and optical measuring systems for workpiece measurement and tool setting applications in machine tools.
Our measuring technology "Made in Germany" supports customers in various industrial sectors to increase their productivity as well as the quality of the produced parts. Due to the economic efficiency, the precision and the in-process reliability of the products, measuring components of Blum are essential instruments for metal-cutting either for companies in mould and die or big groups of automotive and aircraft industries.
Do you also want to increase your productivity? So please have confidence in the innovative measuring technology by Blum.
Blum - focus on productivity
| | |
 |
Function test bench for hydraulic valves
End-of-Line-test bench for function tests of hydraulic valves for the automotive industry.
Test steps:
Temperature control: 40 �C
Manual loading of the valves
Feeding via conveyor belt
The valves are placed in the test cell by a robot
Test cycle:
- Deaerate
- Setting of the operating point
- Characteristic
- Test for leaks
Put in trays (OK / not OK)
Conveying fo the trays
Features:
fully automatic handling of the specimens
- Conveyor belts
- Robots
- Other handling equipment
Computer controlled test cycle | | |
 |
Impulse Test Benche
New modular type series of our approved range of Impulse Test Benches.
Specimens
Hoses and Hose assemblies
Valves
Tubes
etc.
Test Standards
DIN EN ISO 6803
SAE J343
ISO 6772
AK-LH03 (VDA)
LTF 4730-001
JIS B 8360
and more ...
Advantages
Economic price
Compact design, for less space consumption
Modular housing, flexible installation and reduced delivery time
Equipped with the approved NovoPS test software
| | |
 |
Laser Control
Laser Control | | |
 |
Low Pressure Impulse Test Benches
Heat exchangers and radiators for the automotive industry are tested during the development and production.
The life cycle tests include the dynamic load with various pressure functions and temperature collectives
Test fluid
Water, Water-Glycol-blend, Ethanol
Pulse volume
up to 2 litre, depending on the pressure and the elasticity of the specimens
Pressure funtions
� up to 50 bar (higher pressure on request)
� function gradient: trapezoid / Sinus / freely programmable
� frequency: up to 2 Hz depending on the pulse volume
� automatic adjustment of the minimum vapour pressure
Chamber temperature
� maximum temperature: up to 150 �C
temperature gradient: up to 3 �C/min
� optional:
minimum temperature: -40 �C
Fluid temperature
� maximum temperature: up to 150 �C
temperature gradient: up to 3 �C/min
Streaming-through of the specimens
� continuous streaming-through up to 40 l/min
� without streaming-through
� with cyclic streaming-through (time triggered / temperature triggered)
Mounting of the specimens
� Direct mounting in the chamber
� Mobile rack (mounting outside of the test chamber on a movable frame with quick coupling)
Connections
� manifold
� with couplings
� optional:
subdivision in several test circuits with separately activatable valves
| | |
 |
Novotest Pulse and Burst Test Stands
Tests are necessary for development and quality assurance in order to meet the ever increasing demands for higher dynamic load-bearing capacity and prolonged service life under strongly varying operation and environment conditions.
| | |
 |
Pulse-Flex-Test benches
Rotatory movement
Test acc. to
- DIN/ISO 6802
- DIN/ISO 8032
dynamic testing pressure: max. 1000/630 bar
Pulse volume: max. 440/700 cm� at 1 Hz (EN ISO 6803)
Test frequency: max. 1,5 Hz
Temperature of the testing medium: max. 160 �C
Number of specimen: max. 8
Flex-Mechanism for Omega- and Half-Omega test
Rotation radius: max. 400 mm
Rotating speed: max. 60 1/min
| | |
 |
Temperature Test Benches
Temperature test bench for automatic gearboxes and components
Universal R+D Test bench for pressure and function testing of automatic gearboxes and its components
Computer controlled fully automatic test procedure
The top and sidepanels can be removed for easy access to the test area
Universal mounting gear for various gearbox models
Drive unit:
Power rating: 23 kW
Torque: 60Nm
Max. speed: 9.000 1/min
Hydraulic Unit:
Tempering: -27 ... +150�C
Test pressure: max. 100 bar | | |
|
|
|
|
Blumenbecker Purfürst GmbH
|
|
 |
FILMS
By intensive cooperation with the operators of extrusion plants and calender lines, Blumenbecker Purfürst contributes with profound know-how to the system control of these plant types. In particular, our know-how comprises
Extrusion plants:
Production of flat films and plastic plates via smoothing units
Calender lines:
Production of hard and soft film We take over the control of all your process steps from the storage, processing and dosing of raw material up to wind-up and conditioning of the final product.With our engineering experience, we furnish new plants completely or modernize existing plants.
| | |
 |
FOAM PRODUCTS
Our technological know-how for many years has formed the basis of our custommade software solutions, which are applied for example in the sector of foam extrusion.
Companies can rely on the user-oriented operation comfort, the safe process monitoring and the stable control and regulation functions of our applications. Our software solutions offer reliable support in everyday production.
| | |
 |
PELLETS
| | |
 |
SOLUTIONS FOR THE RUBBER AND TIRE INDUSTRY
Production processes in the rubber and tire industry are complex and multilayered: Today, a single motor-car tire consists of approximately 10 different components. For this reason all processes and sequences must be precisely co-ordinated during production and fitting together perfectly: Exact to the millimeter, loss-free and 100 percent adapted to the production chain. Even minimum errors in the system are fatal because they involve substantial costs by loss of production and downtimes.
Particularly in the rubber and tire industry, the name Blumenbecker Purfürst stands for highest quality and technical competence that is outright convincing. As a partner of many years for this branch of industry we utilize a comprehensive expertise of production flows, and we develop solution methods you can count on for all automation processes. After all, we have been busy for customers from this industrial sector since 1928, the year Purfürst was founded.
Since our foundation, we have given advice and have provided the rubber and tire industry with the right systems and plants for industrial automation, and we offer complete solutions from one hand.
We offer you the right control architecture for:
Multiplex extrusion plants
Roller head plants
Auma plants
Drive belt assembling machines
Calender plants
Profile production plants
Production lines for flexible tubes
| | |
|
|
|
|
BM Becker Messtechnik
|
|
 |
Adsorption Method forSampling of Dioxins and Furans
Applications
The continuous monitoring of dioxin and furan emissions of incinerators is a topic which has been discussed globally over the last several years. Even though a continuous on-line monitoring system would be the optimum solution, such systems are not available. Therefore, long-term sampling using AMESA could close the gap between reality and target results. AMESA provides more informations on dioxin emissions than the usual short-term collection of samples over a few hours on 1 – 3 selected days per year.
The TUV approved AMESA monitoring system is used for measuring dioxin/furanemissions in plants which have to be approved and are subject to the German environmental regulations 17. BImSchV and TA Luft.
using AMESA could close the gap between reality and target results. AMESA provides more informations on dioxin emissions than the usual
The AMESA can be used, for example, in refuse incinerators, hazardous material incinerators, medical waste burners, cement kilns etc.
Special Features
- Uses the well-known adsorption method
- Information on monthly, 2-weekly or weekly mean value of
dioxin/furan emissions by analysis of mixed sample (XAD-II cartridge) in laboratory
- Additional information on flue gas velocity, sample gas flow volume, flue gas and cartridge temperature as half-hourly average. Optional up to 4 informations like e.g. O2, CO2, CO, HCl, dust etc. can be recorded and saved half-hourly average.
- No collection of condensate and none of the associated
handling problems during monitoring over long periods
- Broadly based measuring range for dioxin/furan concentrations between 0.0001 and 10 ng/m³ (as TE to NATO CCMS model).
- Sampling period between 6 hours and 4 weeks possible
| | |
 |
Advantages
Reduced running costs by minimizing
the useof additives
- Reduced costs by optimizing the built-in dioxin reduction stages
- Input control in wooden incinerators is no
more needed
- Minimizing running and maintenance costs
by monitoring the reduction in furnace temperature
- Minimizing handling costs, due to no
sampling of the condensate
Achieving a “transparent flue” and the
environmental acceptance that goes with it
| | |
 |
emission control technology
emission control technology | | |
|
|
|
|
Bran+Luebbe GmbH
|
|
 |
AutoBlend Process Systems
The complete solution for higher productivity and product quality
Turn-key metering and blending systems for the production of high-value products using liquids, pastes and powders
| | |
 |
NOVAPLEX Process Pumps
NOVAPLEX pumps are powerful diaphragm process pumps for a variety of applications. They are best suited for critical high pressure installations. Additionally, they can be used when the capability of classical metering pumps is exceeded.
| | |
 |
On-line Monitors for Process Control
The Bran+Luebbe On-line Monitor family was especially developed for long-term use in typical industrial areas, with a robust and easily maintained design based on 75 years of experience. Thousands of installations all round the world demonstrate the outstanding suitability of our on-line Monitors - from day to day and year to year | | |
 |
ProCam Metering Pumps
Econonical, reliable and powerful are the keywords for the ProCam metering pump range which is used for metering and blending of liquids in low or medium duty applications with double diaphragm or plunger pmps. | | |
|
|
|
|
Brandenburger Isoliertechnik GmbH & Co
|
|
 |
Ablation materials
Brandenburger ablation materials are composite materials for temperatures up to about 3500 °C.
The type and composition of these materials protect structures and components against extreme temperatures for a limited time.
| | |
 |
Insulation materials with high compressive strength up to 300 °C
Insulation materials with high compressive strength up to 300 °C
In addition to their excellent insulation properties, Brandenburger insulation materials designed for high compressive strength also have excellent mechanical characteristics. This makes these materials especially suitable for applications where the dimensional stability of the insulation material is an important quality aspect.
| | |
 |
Sliding materials
Brandenburger sliding materials are composite materials based on thermoset resins, enriched with additives to reduce friction and wear. | | |
 |
Thermal Insulation
Product: BRA-GLA® N
Brandenburger BRA-GLA® SeriesBRA-GLA N material is a laminate based on high-quality glass fabric combined with a temperature-resistant thermoset resin matrix.
Special material characteristics
Long-term dimensional and shape stability
High long-term temperature resistance
Good insulation properties
Coefficient of expansion similar to that of steel
Areas of application
Used as pressure insulation plate in the manufacturing of dies and moulds, and as piston and frame insulation on heated presses.
Its very high dielectric resistance makes it also suitable for switch cabinet and apparatus engineering
| | |
|
|
|
|
|
|
 |
Automatic fillet welder
The Bug-gy Fillet Welder is designed for making continuous or intermittent stitch welds on fillet, lap or butt joints. It is a lightweight portable carriage that uses powerful magnets and guide wheels to clamp and track on the work piece. | | |
 |
Automatic overlay welde
Automatic overlay welde | | |
 |
Circle Cutters and Welders
HOB-O
A Lightweight precision Hole Borer, Beveler, and Welder that is easy to use.
The DC HOB-O lightweight hole borer is easily carried to the work, and is quickly centered on the workpiece - all you need is a single center-punch mark. Set the hole radius on the built-in scale, light he torch, start your cut and hot the switch to make smooth accurate holes in any position: virtually eliminating the need for grinding and touchup. This flame-cutting machine will cut holes from 1" to 8" (25mm - 200 mm) inside diameter and from 14 1/2" to 48 1/2" (368mm to 1220mm) outside diameter. When mounted with magnets, each magnet foot is covered with a shield to protect it from direct flame and heat. | | |
 |
CNC pipe cutting and profiling machine
The MM1 is a computer-controlled machine that automates the cutting of profiles, holes, nozzles and shapes on pipe with diameters from 4" to 16" (100-400 cm). It rotates the pipe on it’s roller bed with a three jaw chuck while simultaneously moving a cutting torch back and forth along the pipe’s axis. | | |
 |
PIPE-BUG
The Pipe-Bug is a chain driven pipe cutting machine. This machine provides a quick, economical way to cut and bevel pipe. One machine can be fitted to cut any size pipe beginning at a 3" (7.6 mm) diameter. A triple link chain and precise control of chain tension on the traveling wheels give the Pipe-Bug the straightest cutting capability of any type of chain machine available. For pipe diameters above 18" (457 mm) or cuts that must be made with the machine in the horizontal position, use of a guide strip is recommended. | | |
 |
Portable cutting machine
Portable cutting machine | | |
 |
Portable plate beveler
Portable plate beveler | | |
 |
Structural Steel Cutting Machines
Reduce material handling and cut beams, channels and angles in place.
The BEAM BUG is a lightweight, easy to carry machine designed to cut beams, channels and angles from one rail setting. It produces smooth, square, accurate cuts and virtually eliminates grinding and touch up. Now, you can take the machine to the work and greatly reduce material handling costs.
The BEAM BUG is positioned on the workpiece by placing the beam rail on top of the beam. This rail is held in position by powerful permanent magnets and beam clamps. The beam rails enable miter cuts on webs, and when the work can positioned, on the flanges too.
The BEAM BUG carriage has a push-button clutch and locks onto the beam rail. It is easily removed for handling and/or storage. A single speed control sets both vertical and horizontal travel speed. Movement in wither direction is selected by a toggle switch. Positive rack and pinion drives with infinitely variable speed control insure precise cutting speeds. Limit switches prevent vertical overrun. Gases are controlled by a quick-acting manifold which eliminates repetitive torch adjustment. Double-bearing wheels provide rigidity and accuracy. The torchholder and torch swivel to the correct position, and positioning pins set bevel angles. The BEAM BUG III is supplied with a 10" (254mm) two-hose machine torch and three cutting tips. (Specify fuel gas and voltage when ordering.)
| | |
 |
Tube cutting machine
Tube cutting machine | | |
|
|
|
|
Buhlmann Rohr−Fittings−Stahlhandel GmbH + Co. KG
|
|
 |
Industries
Through its long-term business relations, the BUHLMANN GROUP has proven itself as an expert supplier and partner for industries with vastly varying demand, quality and service profiles. Our clients and business partners benefit from this know-how. At present, we successfully work together with the following industries in the fields of plant and pipeline construction:
Energy sector
Chemical industry
Petrochemical industry
Gas industry
Shipbuilding
Mechanical engineering | | |
 |
Product range
The BUHLMANN-GROUP offers an impressive breadth and depth of high-quality steel tubes and pipes and fittings. The materials available range from plain carbon steels through to high-alloy stainless steels. We are forever adding to and expanding our product range to maintain the standards of a global business enterprise.
One of our core areas is seamless alloy steel tubes, stainless steel tubes as well as fittings and flanges conforming to ASTM, DIN and EN standards. Our product portfolio includes seamless and welded tubes as well as fittings made of non-alloy carbon steel. The range is rounded off by special tubing, fittings and flanges, which are also available in special alloys.
| | |
|
|
|
|
Burckhardt Compression AG
|
|
 |
compressor
labyrinth hyper compressor | | |
 |
Hyper Compressors
Hyper Compressors
For LDPE Production - Customers' Choice since 1951 | | |
 |
Laby®-GI - Fuel Gas Compressor
The best fuel gas supply system for MAN Diesel's ME-GI dual fuel propulsion system
Unique combination of contact-free sealings and high pressure stages for low temperature applications! | | |
 |
piston compressor
labyrinth piston compressor | | |
 |
process gas compressor
process gas compressor | | |
|
|
|
|
Burghardt + Schmidt GmbH
|
|
 |
Cut-to-length lines
Cut-to-length lines are available in different versions and consist of modular machine components from the wide B+S product spectrum for adaption to the most varied of manufacturing requirements. This assures maximum precision and reliability for individual system solutions. | | |
 |
Levelling machines
B+S high performance levelling machines are designed and developed by us to meet specific customer wishes and requirements. B+S supplies levelling machines with motor-driven roller feeders for single-sheet production and strip levelling machines.
Cassette-type quick tool change systems assure short setting-up times and minimum maintenance. The use of tool cassettes with various levelling roll diameters for different material thicknesses guarantees maximum levelling performance and service life. Depending on the levelling quality and surface requirement, up to 23 levelling rollers with or without intermediate rolls (six-high technology) are implemented. The adjustment of lower back-ups to bend the levelling rolls is done either by electro motors or hydraulic cylinders.
| | |
 |
Packaging lines
B+S packaging lines represent a consistent enhacement of our slitting lines to avoid bottlenecks when removing rings from the turnstile and increase productivity. Easy handling when unmatching, binding and palleting as well as the safety of the operator are major criteria on our packaging lines.
| | |
 |
Plastic cutting machines
B+S plastic cutting machines are tailored to the individual needs and wishes of our customers. This means that each machine is specially modified to fully satisfy technical production requirements and achieve maximum cost efficiency.
| | |
 |
Slitting Lines
B+S slitting lines are tailored to the individual needs and wishes of our customers. Each machine type is specially modified to suit the relevant technical production requirements, achieving maximum cost efficiency | | |
 |
Special machines
Because of our high skilled engineers and workmen with long time experience we are also competent partners for our customers in the field of special machines and lines.
| | |
 |
Stretch-bend-levelling lines
Stretch-bend-levelling represent a technique by which thin and the very thinnest metal strips may be levelled. Due to the superimposition of tension and bending during the levelling process, material parameters such as yield point, elongation, spring back value may be set and internal stress reduced. Even strip form deviations are minimised. These include waviness, cross bow, coil set and camber. Due to coil improvements, major benefits are also achieved for further processing, i.e. deep-drawing properties and the precision form of the finished products. In the case of surface coatings, narrower layer tolerances are achieved, punching strokes per minute increased and a longer tool life assured. | | |
 |
Traversing spoolers
B+S traversing spoolers are implemented when slit coils with several coil lengths must be wound. These represent a further element in the optimisation of the production process. In case of small batches, rewinding systems with individual coilers are implemented. Multi-coilers, be it on slitting lines or in other sectors, assure maximum productivity. Easily programmed traverse controllers, together with the latest drive technology, guarantee maximum availability.
| | |
|
|
|
|
Burgmann Industries
|
|
 |
cartridge seals
cartridge seals | | |
 |
agitator seals
agitator seals | | |
 |
gasket sets
gasket sets | | |
|
|
|
|
Burgsmüller GmbH
|
|
 |
Axial stroke whirling
Axial stroke whirling is a suitable process for almost any pitch and inside diameter.
The basic idea of this process consists in substituting the rotation of the tool inclined by the pitch angle - that is required in order to produce the spiral contour - by a superimposed rotation/translation movement. The necessary stroke depends directly on the pitch. In addition, the tool is inclined by the pitch angle in the rotating and oscillating whirling mandrel.
This design allows the bearing and gear unit to be transferred from the inside diameter to the outside so that there are no space limitations restricting the sturdiness of these elements. In this case again, the support of the tool head by means of guide bars in the inside diameter ensures reliable guidance of the tool. Inside diameters from 15 mm onwards can thus be machined in virtually any lengths. Conic contours can also be produced without guiding tool head with the cutting process being limited exclusively by the maximum admissible projecting length of the whirling mandrel
| | |
 |
External thread welding
In the following, the whirling process shall be described by the example of the production of a trapezoidal screw thread:
In contrast to conventional turning operations characterised by a stationary tool and a workpiece rotating at high circumferential speed, whirling involves an eccentrically rotating high-speed tool combined with a slowly rotating workpiece.
As the rotational axes of the workpiece and the tool support with the fixed tool are offset, an interrupted cutting process with discontinuous chip formation is obtained.
.
Both axes are inclined by the pitch angle so that in the contact point the tangent of the curve of rotation of the tool corresponds to the helix. The translatory movement required for thread cutting is produced by displacing the workpiece or the tool.
The actual feed motion required for chip removal results from the difference between the tool and workpiece speeds. Tool and workpiece can also rotate in different directions; i. e. cutting can be carried out in co-rotation or in counter-rotation.
The cutting edge penetrates into the workpiece on a circular path thus separating a chip. The workpiece than continues to turn by a certain rotation angle that is determined by the relation between tool and workpiece speed and the next chip is removed.
A defect in the form of "humps" is thus produced during the cutting process. This geometry deviation does generally not involve any negative effect as the maximum of these "humps" lies in the profile core diameter and decreases sinusoidally relative to the profile flanks. The surface contour obtained can be represented in the form of a traverse with convex connection lines. The form error with regard to the nominal tool circle is a function of turning frequency and tool and workpiece diameters as well as of the number of cutting edges.
| | |
 |
Machines, groups and tool systems for whirling and milling technology
Machines, groups and tool systems for whirling and milling technology | | |
 |
spare parts for extrusion.
spare parts for extrusion. | | |
|
|
|
|
Burkhardt GmbH
|
|
 |
Automats
The automatic punching machine - STA - is predestined for punching, bending, embossing and forming operations. All machines of our series are obtainable as either single con-rod or double con-rod version.
Each automatic punching press is available in 3 variants: as direct drive or intermediate planetary gear equipped version or as servo drive equipped version for the operation of the plunger at variable speeds.
The ideal full-spectrum solution out of one source: automatic ebu punching machine with ebu strip feeding system containing electronic roll feed, precision straightening machine and coiler.
The automatic ebu punching machine can be completed according to your individual requirements and to a fully automatic plant.
| | |
 |
C-frame presses
The C-frame press models currently available for supply have primarily been designed for the manual feeding or workpieces and thus for manual operation.
The individual machine setting options and the level of automation of the different machines including the in- and outfeeding of the workpieces depends on the working duty to be met.
Within a press rating range from 60 kN up to 4,000 kN we shall always find the appropriate version to satisfy your particular demands.
| | |
 |
Coilers
To enable the processing of coiled raw materials, the strip feeding systems need to be equipped with so-called coilers. The design of the coilers enables the processing of source materials of different in- and outside diameters and thicknesses. Depending on the dimension of the coil, the equipment operates either in pulling off or in uncoiling mode. The cutting or forming process defines the speed of the strip during the execution of the uncoiling procedure.
The carrying force of the ebu coilers ranges from 500 kg to > 20,000 kg.
The semi- or fully automated operation of the machine without any need for interfering manually is ensured when using particularly large-dimensioned source materials. Different appropriate means can be utilised to achieve this
| | |
 |
ebu series H
The C-frame eccentric press of cast-iron frame is designed for punching, bending, embossing and drawing operations, especially however for manual loading - but automatic operation is also possible.
This series is the cost-effective version for your forming operations.
This machinery is available from:
160 up to 1.600 kN press force.
| | |
 |
ebu series HK
The C-frame eccentric press of welded steel construction is designed as universal press for punching, bending and forming operations.
Due to its modular construction, it is best suited for your most different range of applications.
The multi-purpose press which you gain of twice: It works as machine for manual loading and also as a full-automatic one.
This machinery is available from:
400 up to 4.000 kN press force.
| | |
 |
H-FT series
The bench-type eccentric press is suited for manual feeding of workpieces or the automated processing in combination with small feeding devices. Thanks to the little space required for its installation, the machine can be operated in even smallest rooms.
The machines of this series are standardly equipped with a combined, hydraulically operated coupling and brake assembly. Consequently, the noise produced by them is always clearly below the required maximum level.
This machinery is available with 60 kN and 120 kN.
| | |
 |
STA Monobloc
Basically, the automatic Monoblock design punching presses are made of welded steel. The FEM optimised and deformation-tested design guarantees highest rigidity. All other assembly groups, such as the drive, the drive trains, the con-rod, the bearing and the plunger are unitised design elements.
Monoblock designs can be realised only up to a certain frame size. We can build machines of this type with press ratings of up to 10,000 kN and table sizes of currently up to 3,000 mm length. With any values beyond that, the press bodies need to be of a split design.
| | |
 |
STA-G Split design
All split type punching machines made by Burkhardt are cast designs. Only very large parts or components and split machine versions that cannot be cast are steel type constructions.
Hydraulically prestressed tie rods enable the assembly and prestressing of the different press body components in the machine frame. The use of correspondingly selected materials guarantees the high rigidity and optimal attenuation behaviour of the frame.
Currently, split type automatic punching machines with press ratings from 400 kN to 10,000 kN can be produced. The length of the benches is limited to maximum 5,000 mm. All machines of this series are, true to the unitised construction design realised with them, available as one or two plunger equipped versions and can be equipped with different drive variants.
| | |
 |
Straightening machines
The straightening machine is the central element of any strip feeding plant. Putting your material into a homogenous and stress relieved condition is the task that has been assigned to it. This is the basis for both the unchangingly high standard of your manufacturing processes and the optimal utilisation of expensive tools. The efficiency and profitability of feed press systems is essentially co-determined by the performance and quality of the strip feeding system used with it. This is why the choice of the straightening machine requires your particular attention.
Expensive damages to your equipment or material due to dirt or other types of pollution can, to the greatest extent, be excluded when using ebu straightening technologies. The openable straightening head or the removable straightening tool holder provides easier access and facilitates the fast and more frequent cleaning of the rollers.
The non-sensitive hydraulic or frequency-controlled drive provides for the notably good straightening results.
The diameters and number of the straightening rollers have been geared to the required sheet metal thicknesses and to the working duties to be covered.
| | |
 |
Strip feeders
ebu feeding devices cover a large and uninterrupted range of applications, scilicet the feeding of strips with cross sections from 250 to 6,000 mm² and thicknesses of 0.2 to 8.0 mm.
The design of the feeding control allows electrical interlinking with all press control systems, even of outside makes.
The ebu feeding performance comes to more than 1,000 strokes per minute.
Intermediate ventilation realised at speeds of 600 strokes per minute through fastest acting valves and highly integrated hydraulic and/or pneumatic systems.
| | |
 |
Strip feeding systems
ebu strip feeding systems, consisting of:
roll feed
straightening machine and
coiler
are designed for strip widths up to 1,500 mm (standard range of width).
| | |
|
|
|
|
Buss−SMS−Canzler GmbH
|
|
 |
Bio-Ethanol, Fuel-Ethanol, Dehydration of Alcohols
Vapour permeation is utilized for dehydration of ethanol, bio-ethanol, fuel-ethanol and fusel oils
We offer standard- as well as tailor-made systems.
Stand-Alone-Systems:
Raw alcohol in liquid state is taken from a tank farm, and by means of membranes it is dehydrated to low water content.
Integrated Dehydration Systems:
The dehydration system is directly integrated in the rectification of existing or new ethanol systems. In doing so the energy demand of the complete ethanol system is minimized by arranging an optimized equipment configuration and strict heat integration.
Reference Plant:
We will much appreciate if customers visit our reference plant.
Advantages for Plant Operators:
Energy saving in reboiler and condenser of the rectification since membrane systems allows feeding with up to 20 % water. At the same time the throughput of existing plants can be increased.
Energy saving compared to molecular sieve due to a smaller recirculation quantity to distillation with only few ethanol.
Low maintenance costs since no alternating process conditions are available, e.g. pressure swing, and no switching components.
Utilization of entrainers not required.
Treatment of chemicals not required.
Simple maintenance and plant enlargement, even during plant operation due to the modular design.
Energy saving by overall heat integration.
Improved Product Quality, Plan Integration and Safety due to:
an ethanol content of up to 99,97 %
safe and permanent operation
direct connection to the rectification columns since process pressures of up to 5 bar and temperatures of up to 150 °C are allowed
Compatibility with fusel oils
| | |
 |
Disc dryers
Disc dryers | | |
 |
Distillation plants
Distillation plants | | |
 |
Evaporators.
Evaporators. | | |
 |
High Viscosity Technology
Buss-SMS-Canzler offers a unique program of high viscosity processors for:
Devolatilization
Reaction
Mixing
Combinations thereof
These processors operate over a wide range of viscosities and residence times.
In addition to the longstanding and well known thin-film processors Filmtruder® and Viscon®, Buss-SMS-Canzler has developed single and twin shaft horizontal, large volume processors of the types Reactotherm®, Reasol®, Reacom® und Reavisc®.
Design criteria that determine which technology is used include:
Residence time
Viscosity
Pressure
Temperature
Vapor volume
Mixing requirement
Melt vs. friable solids
Capital cost
Operational cost
To assist our customer in achieving a comprehensive solution for their high viscosity processing needs, Buss-SMS-Canzler can also provide suitable non-proprietary processors, including:
Flash Evaporator
Forced Circulation Evaporator
Falling Strand Evaporator
Vented Extruder
| | |
 |
Short Path Evaporator
Buss-SMS-Canzler Short Path Evaporator System in skid-mounted design.
The pressure difference between the boiling film and the condensing surface is the driving force for the vapour flow. Operating below 1 mbar requires extremely short distance between the boiling surface and the condensing surface to minimise the pressure drop caused by the vapour flow. For this reason one also talks of Short Path, High Vacuum or Molecular Distillation. The short path evaporator has an internal condenser opposite the heated surface enabling operations down to 0.001 mbar.
Our Short Path Evaporators are characterised by its sturdy construction and the special rotors. The rotors will process products with demanding properties with regard to high viscosity, high boiling temperature and suspended solids.
| | |
|
|
|
|
Busse Heizplattentechnik GmbH
|
|
 |
Aluminium tools
Aluminium tools
for long service life
and extreme 3D
forming. | | |
 |
Flexible electrical heating plates
Flexible electrical heating
plates for small-batch
production
and working
curved edges.
| | |
 |
Heating tables
Interior design today is inconceivable without solid surface materials, such as Corian, Wilsonart, Paracor or Varicor. The acrylic resin component makes the material thermoformable. As these materials are processed at temperatures of approx. 150 - 160° C, standard presses are normally unsuitable. It is precisely for these applications that Busse has developed the heating table.
Photo show
Sturdy, welded table frame. Mounted on 4 casters
Material removal facilitated by hinged top
Easy handling with support from gas springs or pneumatic control
Top and bottom heating plate controlled separately through infinitely variable temperature control system
Full-surface heating conductor system with multiple PTFE and glass filament braiding
No risk of damage from protruding guide rails
Special accessories: Pneumatic control, electronic temperature control with temperature measured 4x per heating plate. Bottom heating plate divided up into separately controllable heating zones.
| | |
 |
Medium heating plates
Busse medium heating plates are designed for use with liquid heating and cooling media. Using the existing resources from your own heating system, you can keep your running costs extremely low.
A "stand-alone" solution combined with a heating unit is also possible. Various models are available on request.
And combining the advantages of two heating systems defines a whole new dimension in ergonomic processing | | |
 |
Pressing tools in multiplex
Pressing tools in
multiplex. With
electrical heating plates
or for high frequency. | | |
 |
Tools in steel
Tools in steel.
For processing
presswood. | | |
 |
Woodworking technology
Forming machines; Hot platens, heating rods ,
Plywood presses for contoured surfaces and mouldings
| | |
|
|
|
|
Buzz i Unicem SpA
|
|
 |
Cement
Cement (production) industry belongs to the secondary manufacturing sector, among process activities that are defined in this way because they involve radical changes and give specific technological and merchandise properties to its own products through systematic transformation processes, so that they result to be clearly diversified from corresponding initial raw materials.
Cement manufacturing method used at present has been patented in Great Britain in December 1824 by Joseph Aspdin, a Yorkshire kilnman that produced the first hydraulic cement, secretly, baking a mix of limestone and clay. Grey color and stone appearance together with solidity and durability made this binder very similar to the stone of Portland, a village in Cornwall, well known for its much appreciated construction stone; therefore the name “Portland Cement”, comes from its appearance and not from the place of origin.
| | |
 |
cements, ready-mix concrete and natural aggregates.
Buzzi Unicem is a modern industrial group specialized in integrated production, sales and marketing of cements, ready-mix concrete and natural aggregates. | | |
 |
Natural Aggregates
Each quarrying activity produces a morphological modification of the territory and must be realized in agreement with the geological characteristics of the ore body and of surrounding morphology.
Buzzi Unicem runs several quarries and invests human and financial resources to provide recovery of environment in the quarries areas in order to mitigate impact related to extraction activities.
Inside the quarry stoping of compact rocks is realized with explosive. After the blast, biggest sized material is reduced in smaller pieces suitable for subsequent processing. Handling and transport are performed with tractors and excavators and, with help of power loaders, material is loaded on dumpers and transported to crushing plants.
Aggregates for concrete production undergo a first crushing and then a dry screening is performed and/or a second crushing.
Subsequently material desilting is performed to separate unwanted smallest sections (silts).
Sieving allows classification of aggregates following granulometric classes to make a correct compound of mix for concrete.
| | |
 |
Ready-Mix Concrete
Ready-mix concrete is a construction material obtained mixing natural aggregates, cement and water, and its production has always been the main use of cement. Production and distribution of ready-mix concrete are realized in concrete mixing plant.
Sized materials (aggregates), after treatment and selection following granulometric classification, are stored in hoppers then, through a special extractor, are appropriately batched and sent to charging hopper by a conveyor belt.
Dust materials (cements) are stored into silos equipped with dust exhausting systems and sent to the weighting device and to the charging hopper by screw conveyors.
Water and liquid additives, batched by use of appropriate devices, are directly added in the concrete truck mixer. The concrete truck mixer provides mix and transport of concrete that will be poured directly on site or pumped with truck mounted concrete pumps. | | |
|
|
|
|
BVM Brunner GmbH & Co. KG, Verpackungsmaschinen
|
|
 |
Full overwrap machine Compacta
Compacta EGS 5022, 7522 and 10022
The Compacta series of overwrapping machines – designed for fully automatic packaging.
The product flow is inline, also the wrapping cycle is sensor-controlled to facilitate manual or automatic loading.
Items are wrapped in centre-folded film that is sealed on the three remaining edges.
Feeding systems ensure superior performances; production speeds of
more than 100 packs/minute are achievable – depending on machine configuration and product.
The heated, constant-temperature sealing system can seal all industry standard films, from Polyethylene to Polyolefin to PVC. The BVM side knife produces neat, high-integrity seals, especially when Polyolefin film is used.
Product changeovers do not require the turning of hand wheels or adjustments of product guides, therefore changeover times are short and operational reliability is increased.
Each Compacta 5022, 7522, 10022 has an upper format limit of 450, 700, 950 mm respectively. A format limit is the sum of product width plus product height. This way the Compacta series provide professional packaging solutions for a wide variety of applications
| | |
 |
Mailmaster BVM vacuum shuttle feeder A3535
The Mailmaster brings innovation and efficiency to your mailings.
The Mailmaster uses the flow wrapping principle with flat film and
produces a thight wrap around your products.
The system is suitable for wrapping Magazines, Catalougues, Brochures
and Mailing products for shipment.
Because of the tight pack no shrinking is required. Areas where this system can be used are Graphics industry, Logistics, Mailings, Post.
In conjunction with addressing systems a perfect Mailing line
capable of 130 packs per minute can be produced.
| | |
 |
Shrink tunnels
The air direction (inside the shrinktunnel) is by means of double air flaps each individually controlled externally.
The standard roller transport system is supplied with heat resistant rollers coverd with silicone rubber. Wire |
| |
