|
|
|
 |
Lakovacie zariadenia,
Ochranné vrstvy,
Pásové sušičky,
Striekacie kabíny,
Vysúšače (sušičky) |
biznestype : |
Manufacturer |
Lakovacie zariadenia,
Ochranné vrstvy,
Pásové sušičky,
Striekacie kabíny,
Vysúšače (sušičky)
| Precise and economic processing of more-component paints with Sprimag mixing units |
|
| The process oriented processing of 2K- and 3K-paints under industrial production conditions generally needs an especially reliable process flow which may only be granted by continuously active monitoring and control of partial processes from the paint supply units up to the application area. Thus coating applications with more-component paints with modern coating machines are not any longer be conceivable without the use of suitable mixing plants.
Already at an early stage, Sprimag has recognized this necessity and for this reason is offering corresponding mixing plants for several years. Within continuous measurements for improvements, as a result of successful developments of Sprimag, the current machine generation has been optimized in many technical details compared to its predecessors. On this occasion the approved gravimetric measuring procedure for paint components as well as the mixing principle inside the mixing chamber has been retained also for the currently designed variants. Constantly precise stirring of paint components are granted and cover a wide spectrum - independent if water or solvent based paints are used. No long-winded calibration or "metering by the liter" is necessary and also very difficult paint systems, which change extremely its performances during pot times, may be processed. The Sprimag modular design allows different variants of the layout. According to the configuration characteristics with consumption quantities between 30 g/min and 800 g/min with a range of viscosity between 10 s and 120 s in accordance with a DIN 4-flow cup and a mixing ratio between 5:1 and 15:1 may be achieved.
|
 | Flat Bed Spraying Plant Flat Bed Spraying Plant
Coating of flat or low-profile parts
Three Axis Automatic Coating Machine |  | Internal coating and internal drying In general, aerosol cans are produced on automatic interlinked high speed lines to achieve optimum economy. The Automatic Internal Coating Machine and Internal Dryer is designed for integration into such lines which then operate reliable to production speeds up to 300 cans/min and more. |  | Internal Coating Machines for Cans The HIL 50/HIL52 range represents the latest stage of development of the proven Sprimag Automatic Coating Machine.
Separate servo drives ensure optimum synchronization between the washing machine or preheating zone, the internal coating machine and the internal dryer, irrespective of speed and can size.
good accessibility to all significant parts of the machine for maintenance and cleaning
even internal coating by means of separate servo controlled drive for the reciprocating movement, independent of conveyor speed
facility for storing all work piece related data
reproducible spray gun holding position
clear text controlled operator guidance
extensive line monitoring and fault evaluation for maintenance of electrical and mechanical equipment
rapid changeovers for all work piece dependent parts
|  | Laboratory Our laboratory displays the latest in painting technology and innovated knowledge about painting applications |  | Round Table Coating Machine Technology
functionality with low space requirements
continuous or fixed indexing operation
Integratable drying applications
very productive with high speed servo drives
ease of use by easy positioning of spray guns
low maintenance | |
|
SPRIMAGazine
Click on this Page to view our Catalog
|
|
|
<
