complete recycling plants

complete recycling plants

RS60 and RS100 series

The RS60 and RS100 have been developed from the RS50 series. Our extensive experience with the smaller series has been incorporated into the design of what is currently the largest four-shaft series available from UNTHA. The RS60 and RS100 machines are also equipped with the patented UNTHA four-shaft system with perforated screen (patent number 319535). With a cutter clearance width of 1.5 m and height of 1 m, the machines in both series are capable of shredding up to 10,000 kg of material per hour with a driving force of 100 kW. The features on offer mean that an extremely wide range of materials can be shredded. Some typical applications Aluminium sections Paper Carpets Plasterboard Circuit board Plastic drums Dish washers Plastic tubes/pipes Domestic waste Radioactive waste Electonic scrap Refrigerators Files Reject paper Foam Rubber waste Garden waste Shredder light fractions Hazardous waste Substitute fuels Industrial waste Tetra-paks Mattresses Textiles Medical waste Truck tires Metal drums Washing machines Metals Waste wood Oil filters Workshop waste

S120 series

The S120 series has been developed for particularly heavy industrial use. These two-shaft shredders are also known as rotary shears and are suitable in particular for shredding metals and tires. A four-shaft shredder is often used down-stream in a second shredding process to reduce granule size even further, and particularly high through-put rates can be achieved using this combination. Even with low speeds and very high torque the machines are capable of shredding heavy gauge metals. If you need to process very bulky or awkwardly shaped metal objects, a compression feeder will help to ensure the required through-put. Some typical applications Al-Mg feeders Paper edge strips Al-Mg housings Paper sheets Aluminium sections Rolls of paper Car tires Tractor tires Electronic scrap Truck tires Metal drums

shredders

shredders

TR series

The TR series has been specially developed to deal with alternative and secondary energy sources. The increased rotor diameter of 1100 mm shows that UNTHA is taking secondary-shredding to another level. The resultant increase in screen surface area facilitates high output volumes of up to 15t/h. The TR series can process all kinds of mixed household refuse in preparation for thermal processing in mono and co-combustion systems. A homogenous end product is achieved taking into account the combustion system (fluidised bed or rotary kiln) in operation.

XR series

The XR series is currently the heaviest in our range of single-shaft shredders; the machines are available in three different sizes. This series has been specially developed for use in the waste disposal and recycling industries, and during the design process we therefore focused on achieving high through-put rates, excellent resistance to non-shreddable foreign bodies and high availability. In order to guarantee this last property, machines for use in waste processing must be able to meet exacting demands; this means that they need to be equipped with extremely efficient foreign body removal systems. Some typical applications Baled carpets Film Bales of film Foam Bales of waste Hazardous waste Bulky waste Industrial waste Demolition wood Plasterboard Domestic waste Substitute fuels