biovac Safety Aspiration System

The portable biovac 106 Safety Exhaust System with an integrated resistant diaphragm pump is used for the safe and precise extraction of liquid non-inflammable excess amounts of chemical, biological, and medical processes. Excess fluids can be removed relatively easily at a fine dosage from slides, Petri dishes, containers with cell cultures, etc., by using different pipettes or glass tips which are inserted into the plot of the pipetting holder A changeable filter holder for a diaphragm filter is integrated between drip pan and diaphragm pump. A diaphragm filter up to a filter fineness of 0.22 µm can be inserted into this holder by the user as required for the work to be done. According to the filter fineness used, it is possible to achieve different rates of filtration, enabling, among other uses, in order to reduce the risk when handling of bacteria and viruses. A suitable profile gasket serves as sealing between the head piece and the drip pan. The resistant diaphragm pump has a long service life. Pump heads and connecting heads are made from PP. The "biovac 106" is switched on and off separately with the device switch or the optionally available foot switch. The connection to the diaphragm pump is made by a rapid-action coupling, which has a shut-off valve on the tank-side. Drip pan and pipetting holder (plot) are connected to one another using a hose. The built-in hose coupling seals both sides hermetically. This enables the possibly contaminated fluids collected in the tank to be disposed of completely separately. The user can use suitable pipetting tips into the receptacle the pipetting holder. Special characteristics: - resistant diaphragm pump - continuous pump operation or foot switch control - container autoclavable - systems with 2 litre receptacles - plot with gasket profile, float valve and fine filter housing with bayonet fixing - bacteria-, virus filters d = 55mm, up to a pore size min 0.22 µm - quick coupling hose connectors have automatic isolation valves - hand-piece with pipette holder - single and eightfold pipette in the scope of supply - consumable material is available

Laboratory-Vacuum-System

Scope of supply: - chemically resistant diaphragm pump MPC 101 Z or MPC 301 Zp equipped with gas ballast valve - suction-side separator with 500 ml round-bottomed flask - pressure-side, insulated intensive cooler with round-bottom flask 500 ml with safety valve - one unregulated connection - assembled and wired ready for connection - suction connection for hose DN 8

MPC for chemical applications

The diaphragm pumps for chemical applications -Type MPC- are are chemically resistant against aggressive solvents and acidic vapors typically used in laboratory routine. The diaphragms and all gas contaminated parts are made from PTFE and PTFE Compounds. The pump and connection heads are carbon fibre reinforced to provide electrical conductivity and prevent electrostatic charging. The long life of these diaphragm pumps speaks for itself. Special characteristics: - chemically resistant Ranges of application: - for oil-free applications - alternative to water jet pumps - vacuum distillation - vacuum drying - vacuum filtration - vacuum concentration - degassing processes - lifting of solvent and acidic vapors - as backing pump Scope of delivery: Diaphragm pump for chemical applications complete with ON/OFF switch and integrated protective switchgear for the motor, hose nozzles for hose inside diameters 8 mm and/or small flanges DN 16 KF and optimized swinging feet. Note: National-typical mains connection cable separately to the pump, see chapter devices accessories.

Rotary Vane Pumps

ILMVAC has been developing and producing rotary vane pumps for 60 years. You can rely in our competence and experience. Our superior material selection and optimised design ensures the best performance and reliability. The result is a professional solution for research and industry.

scroll pump

scroll pump

vac concentrators

vac concentrators.