|
|
|
 |
Laser Welding, Process Controll, Laser Cutting
|
| employees : |
150+ |
| yearestablished : |
1971 |
biznestype : |
Manufacturer |
Laser Welding, Process Control, Laser Cutting
Precitec is the market leader for sensor system solutions in the area of the laser material processing. Our laser cutting heads with non-contact height sensors are recognized worldwide as the standard to achieve an optimum cutting quality. Precitec additionally offers laser cutting heads with integrated sensors for online process monitoring to provide further optimization of the cutting process. Plug-and-play electronics, sensor signal processing with process controls, and linear drives with optimized servo controls for closed-loop controls are available for all laser types like CO2, solid-state, disk, or fiber laser.
For laser welding Precitec offers a unique product range of online quality monitor systems for pre-process, in-process, and post-process monitoring. Standardized mechanical and electrical interfaces allow an easy integration into existing machine setups. Welding heads with integrated process monitor sensors offer the state-of-the-art solution for all laser types like CO2, solid-state, disk, or fiber laser.
Another product range of Precitec are process sensor systems for online control for industrial gluing and adhesives technology.
 | Glue Applications System of Inductive Sensors for the Distance Control during Glue Applications
Due to deviations of the components to be connected there might be a problem to accurately position the adhesive bead in the automated glue application. If the glue is not applied to the desired position and with a irregular cross-section the result will be a significant impairment of quality.
|  | Laser Cutting - CO2 - 2D Cutting head HP1.5"
With integrated non-contact distance control
For high pressure cutting applications
Cartridge replacement system enables faster change of focal length
Preadjustable focusing optics
Water cooled connector head
All connections in the upper part
All water guiding parts are made of highly corrosion-resistant stainless steel
Error signals in case of collision, cable breakage and exceeding the measuring range
Focal lengths: 3.75", 5", 7.5", 10"
Lens diameter: 1.5"
Free aperture: 33 mm
Axial length (f = 5"): 236.4 mm
Max. cutting gas pressure: 25 bar, 365 psi
Nozzle standoff distance:
recommended: 1.0 mm to 5.0 mm
possible: 0.3 mm to 10.0 mm
Measuring resolution: < 0.01 mm
Mass (f = 5"): 4.0 kg
Electronics: Lasermatic® |  | Laser Cutting - CO2 - 2D Cutting head M1.5" SF2.5"
With integrated non-contact distance control
Compact design
Short focal length, cutting of thin sheets
Error signals in case of collision, cable breakage and exceeding the measuring range
Focal length: 2.5"
Lens diameter: 1.5"
Free aperture: 33 mm
Axial length: 135 mm
Max. cutting gas pressure: 20 bar, 290 psi
Nozzle standoff distance:
recommended: 1.0 mm
possible: 0.3 mm to 10.0 mm
Measuring resolution: <0.01 mm
Mass: 1.4 kg
Electronics: Lasermatic® |  | Laser Welding System for MSG laser hybrid welding
System for GMA laser hybrid welding
For welding steel and aluminum
Integral protective window monitoring and Cross Jet
Small interfering contour
Laser welding head: YW50
Laser: Nd:YAG or Ytterbium fiber laser
Welding power supply, wire feed system: company CLOOS Schweißtechnik GmbH
Focal length collimator: 100 mm to 200 mm | |
|
|
<
