flowmeter

eletromagnetic flowmeter.

Levelflex M FMP40

Smart Transmitter for - Level Measurement in Bulk Solids and Liquids - Interface Measurement in Liquids Your benefits Probes are available with threaded process connections from ¾" and flanges from DN40 / 1½. Rope probes, above all for measurement in bulk solids, measuring range up to 35 m. Rod probes, above all for liquids Coax probes, for liquids Simple, menu-guided onsite operation with four-line plain text display. Onsite envelope curve on the display for easy diagnosis. Easy remote operation, diagnosis and measuring point documentation with the free operating program supplied. Optional remote display and operation. With coax probes the measurement is independent of internals in the tank and of the installation in the nozzle. Probe rod and probe rope can be replaced/shortened. Approvals: ATEX, FM, CSA, TIIS, NEPSI, IECEx. Level measurement Continuous level measurement of powdery to granular bulk solids e.g. plastic granulate and liquids. Measurement independent of density or bulk weight, conductivity, dielectric constant, temperature and dust e.g. during pneumatic filling. Measurement is also possible in the event of foam or if the surface is very turbulent. The HART with 4 to 20 mA analog, PROFIBUS PA and FOUNDATION Fieldbus protocols are available for system integration. Application in safety related systems (overspill protection) with requirements for functional safety up to SIL 2 in accordance with IEC 61508/IEC 61511-1. WHG approval Interface measurement Continuous measurement of interfaces between two liquids with very different dielectric constants, such as in the case of oil and water for example. Measurement independent of density, conductivity and temperature Electronics version for the simultaneous measurement of the level of interfaces and the total level in liquids. The HART with 4 to 20 mA analog protocol is available for system integration. Special version for the measurement of the level of interfaces at a constant total level. The PROFIBUS PA and FOUNDATION Fieldbus protocols are available for system integration.

Liquicap T

Capacitive level measurement Two-rod probe for continuous measurement in liquids Your benefits Safe function regardless of tank geometry thanks to probe design No calibration necessary (preconfigured from factory 0 %...100 % to probe length ordered) High quality, non-corrosive materials (carbon fibre, stainless steel) for use in aggressive liquids and liquids which present a hazard to water (WHG-approved (German Water Resources Law)) No moving parts in tank - long operating life - dependable function without wear Cost-effective solution for continuous measurement of levels in conductive liquids Optimised storage by simply shortening the probe rods on site (probe shortening set) Field of application The Liquicap T sensor is used in conductive liquids (as of 30 μS/cm) for continuous level measurement and is preconfigured from factory 0 %...100 % to probe length ordered. As of a conductivity of 30 μS/cm, the measurement is independent of the dc-value (dielectric constant) of the liquid. It can also be deployed in Ex area, Zone 2. The Liquicap T is particularly suited to the following applications: Small measuring ranges (as of 150 mm) Cistern measurements Aggressive liquids (many acids and alkalis) Independent of the tank material (plastic, stainless steel or concrete) or the tank shape Used in conjunction with the Fieldgate FXA320 (remote measured value interrogation using Internet technology), Liquicap T is an ideal solution for inventorying material and optimising logistics (inventory control).

Prosonic T

Compact transmitters for non-contact level measurement of fluids and coarse bulk materials Your benefits Non-contact measurement method, therefore almost independent of product properties Integrated temperature sensor for time-of-flight correction. Accurate measurements, even for temperature changes Linearisation function for measured value output in any units with optional display simple mounting via NPT 1½" thread Two-wire instrument; level indicated by 4-20 mA output current Field of application The compact transmitters Prosonic T are used for continuous, non-contact level measurement in fluids and coarse bulk and lumpy materials (grain size from 4 mm onwards). Maximum measuring range: 4 m in fluid 2 m in bulk materials For larger measuring range see FMU231A: 7 m in fluids 3,5 m in bulk materials

Prowiel monitors

Prowiel monitors the flow volumes of the fully desalinated water

Silopilot T

Electromechanical Level System Your benefits Measurement of levels up to 32 m, regardless of bulk solid properties Accuracy ±2.5 cm or ±1 pulse, thus measured level recorded precisely Process temperatures up to 150°C possible Compact transmitter with 0/4 - 20 mA current output and additional freely programmable signal outputs (e.g. counting pulses) Easy menu-guided local operation via four-line plain text display Fully electronic digital minimum fail-safe mode, thus no movement into silo outlet, conveyor elements not affected Supply voltage 90 - 253 VAC (wide-range voltage power unit) as well as 24 VDC, depending on version selected Optional version with "dust ignition-proof" certificate for use in dust incendive hazard areas, Zones 20, 21 and 22 (measuring environment) or Zones 21 and 22 (instrument environment), Category 1/2D. Field of application The Silopilot T FMM20 is an electromechanical level system for light bulk solids such as wheat, plastic granules and powder. Depending on the sensing weight, the level can be measured in bunkers or silos with dusty, fine-grain or coarse-grain bulk solids.