Fully automatic spiral strip accumulator

The tube welding plants are tailor-made to meet the respective requirements in the automotive sector, in the oil and gas industry and general construction. Included in the range of products are tube welding lines for outside diameters from 3/4" to 3 1/2" in the case of the smallest welding line and from 8" to 24" in the case of the largest welding line with the corresponding square dimensions up to a maximum of 500 x 500 x 19 mm

metallurgy

metallurgy products

Seamless tube plants (cold)

Cold pilger mills are used for the reduction of tubular products of all ferrous and non-ferrous metals. Beside the classic applications for bearing tubes, stainless steel tubes and copper tubes, tubes of nickel-based alloys, high-strength special metals, titanium and zirconium alloys are also produced. High reductions, simultaneously of the diameter and the wall thickness, are performed at a superior quality level. The reduction ratios reach more than 90% in the case of copper and some of its alloys, austenitic stainless steels and some nickel alloys, and even the brittle bearing steels are reduced by around 70%. The various mill types cover the diameter range from 4 to 280 mm and diameter-to-wall ratios of between 40:1 to 3:1. Ingoing tube lengths of up to 25 m are possible

Seamless tube plants (hot)

Most of the seamless tube facilities operated worldwide were supplied by SMS Meer under the names MEER, INNSE and Aetna Standard. The modernisation and improvement of existing seamless tube mills are also part of our broad range of services.