Chain Conveyor RL-RM / 40-1000 TPH

Cimbria chain conveyors are supplied in easily assemble modular sections, in galvanised plate, alternatively a painted finish can be supplied for types RL/RM 3-12, or hot dip galvanised for types RL 14-16. The conveyors are also available with a wide range of accessories

Dry Stoners TS 90-S / 2.5-5 TPH

The granular material to be separated is taken to the table deck (in its conveying direction) through an adjustable spring-actuated flap. Depending on the grain size, the deck surface, with its adjustable inclination of 6-15°, is covered by a fine-meshed or a large-meshed wire cloth, through which is a steady and adjustable airflow is aspirated. The combined effect of the vibrating movement and of the air passing through the deck causes an arranging in layers of the material flowing in (fluidization). The heavy admixtures sink towards the bottom and are moved to the highest point of the table deck surface (stone outlet) by the contact with the rough deck covering.

Dryer Top

Material The top can be supplied in either: 2 mm aluminium sheets according to DIN 1725-part 1 or 2 mm galvanised steel plate according EN 10142. Top Section The top section is delivered with an inlet flange see type in table 1. The flange is located centrally at the top section. Furthermore the top section is supplied with an inspection hatch (500 x 540 mm) and a stand for level meters.

Gravity Separator GA 31 / 0.5-2.0 TPH

The deck is fluidised by a completely uniform pressurised air system stratifying the light material to the top of the product bed and allowing the heavy material to contact the deck surface. The deck is inclined from side to side and inlet end to discharge end at adjustable angles.

Super Universal Cleaners

Super Universal Cleaners (100-series)

Veg. Oil Extraction-Screw Presses

Veg. Oil Extraction-Screw Presses Roller Mills and Stack Cookers Screw Presses Refining Plants Oleo chemistry