Agitator • In-line mixer

Chemineer is a supplier of mixing solutions and products to customers worldwide. Since 1952, the Chemineer name has come to be well known in the chemical & petrochemical, pharmaceutical, biotechnology, polymers and food & grain processing industries.

Chemineer distinguishes itself from competitors with its pioneer spirit, technical innovations and willingness to partner with its customers on mixing designs. Chemineer fluid mixing knowledge, supported by the best application software, proprietary mixer designs, and strong laboratory analysis enables it to be the preferred supplier of fluid mixing equipment. Chemineer's list of firsts has earned a position of leadership among mixing suppliers.

All Products Line Card

This Line Card is a great quick reference for all available Chemineer products. For more detail on a specific product, please refer to one of the links below. Line Card

Biopharm Mixers

Chemineer's sanitary mixers offer a variety of design configurations, materials and options needed to meet critical sanitary mixing applications and ensure the highest level of sanitary mixing. Chemineer also offers a wide variety of precision-engineered, high-performance impeller options.

Clean Sweep Mixers

The NEW Clean Sweep™ mixer from Chemineer revolutionizes mixing technology by utilizing a swing motion instead of the customary rotating motion providing a hermetically sealed environment!

Colloid Mills

Greerco® Colloid Mills are highly efficient, in-line, processing units specifically designed to disperse solids and/or liquids into a carrying vehicle rapidly and uniformly. Any emulsion or suspension - liquids in liquids or solids in liquids - can be reproduced repeatedly with unvarying particle-size accuracy and distribution. Greerco Colloid Mills produce stable emulsions to the submicron range.

DT Top-Entering & Portable Mixers

Direct-drive and gear-reduced designs for both open and closed tank applications are available. Each unit features Chemineer's renowned reputation for quality that has grown over the past 50 years.

GT Agitators

The line of Chemineer GT Turbine Agitators provides enhanced cost-efficiency and performance embodied in an advanced parallel shaft design.

Heat Exchangers

Kenics® Static Mixer technology, available exclusively in Kenics® Heat Exchangers, offers the highest available coefficients for fast, uniform heat transfer. Capable of reliable operation in a wide range of process applications, including those in the polymer, plastic, and food and beverage industries, Kenics Heat Exchangers require less space, less energy and less residence time than standard designs.

HEV Static Mixers

The patented tab geometry of the Kenics® HEV Static Mixer maximizes the conversion of turbulent energy into efficient mixing for a variety of line shapes and sizes. The mixing elements take advantage of the naturally occurring vortices induced by the element edges to produce complete stream uniformity.

Homogenizers

Greerco® Homogenizers from Chemineer are high-speed, high-shear batch mixers ideal for fast blending and homogenizing of materials through a wide range of viscosities.

HS Agitators

HS Side-Entering Agitators offer the same ruggedness, dependability and simplicity of design found in our other high-quality turbine agitators and mixers. At the heart of the HS Agitator is a right-angle drive exclusively engineered for side-entering agitator service. Chemineer® HS Side-Entering Turbine Agitators work efficiently when a tank is too large for convenient installation of a top-entering agitator, or where headroom is severely limited.

HT Agitators

HT Turbine Agitators have earned a worldwide reputation for long life, flexibility and ruggedness. As a result, they are the preferred agitators of many industries for harsh, demanding environments where peak performance is integral. HT Turbine Agitators are robust, simple and designed for ease of maintenance. The Chemineer HTM mixer is an available option for high torque applications and provides many of the same design benefits as the HT gearbox.

IBC Mixers

Chemineer’s unique new range of industrial agitators are designed for use with plastic transportable (IBC) containers. We supply a range of models suitable for a variety of applications including - blending light viscous liquid as well as re-suspension of settled solids and dissolution of powders. IBC Product Brochure

Impellers

If there were only one mixing job to do, only one impeller would be required. However, there is a very wide range of problems in agitation, and the best impeller for one application may not be the best impeller for another. Includes descriptions and discussions that are intended as a guide for impeller selection.

KM Static Mixers

In all Kenics® KM Series Static Mixers, a patented helical mixing element directs the flow of material radially toward the pipe walls and back to the center. Additional velocity reversal and flow division results from combining alternating right- and left-hand elements, thus increasing mixing efficiency. All material is continuously and completely mixed, eliminating radial gradients in temperature, velocity and material composition.

KMX Static Mixers

For demanding mixing applications, such as those involving fluids with widely disparate viscosities or volume ratios, the common limiting factor in static mixer design is the allowable mixer length. The Kenics® KMX Static Mixer from Chemineer, Inc., the latest addition to the market leading Kenics product line, is the superior choice for these applications.

MD Mixers

The MD Mixer's modular design, featuring innovative shaft bearing cartridges, allows longer operating runs between maintenance periods. Routine maintenance and overhauls can be performed without draining the tank or removing the mixer.

Model 20 HT/GT Agitators

The Model 20 HT/GT agitators feature a high-efficiency gearbox designed specifically for agitator service. Models are available in right angle and parallel shaft configurations. These agitators feature a modular design package with a wide range of speeds for improved process control and greater application versatility. The Model 20 HT/GT agitators are designed to meet AGMA, OSHA, ANSI, IEC, DIN, EU and ATEX standards and requirements.

MR Mixers

Chemineer has demonstrated that it is possible to provide a mixer designed for agitator service at an economical cost, backed by over fifty years of design expertise and applications experience. Chemineer’s MID RANGE Mixers combine quality, durability and economy to supply unbeatable value in mixing equipment for the chemical, water and general processing industries. The MR agitators are designed to be mounted vertically over open tanks.

NIMIX Mixing Systems

Chemineer designs, manufactures and supplies a unique range of low shear, high solids-loading NIMIX mixing systems. NIMIX container/mixer systems are used for both the manufacture and transportation of a range of fluids with applications in chemicals, food and pharmaceutical manufacturing.

PB Mixers

Prochem® PB Series Mixers combine the proven features of the MD Series with the advantages of a pillow block bearing design. You get truly efficient fluid processing plus maximum simplicity of maintenance.

Pipeline Mixers

Greerco® Pipeline Mixers are designed for in-line continuous high-speed, high-shear homogenizing, mixing, emulsifying and rapid dispersing. The Pipeline Mixer offers several mixing heads, each having the ability to handle a range of mixing applications.

QED Agitators

The Chemineer QED Plus Mixer combines Quality, Economy and Durability for unbeatable mixing value. QED Plus Mixers are well-suited for agitator service in chemical processing, petrochemical, pharmaceutical and general industrial applications.

Tote Mixers

Chemineer's new Quik dis-Connect Tote Mixer has all the features necessary for a tote mixer. Not only does this tote mixer have a quick disconnect feature, but is also the safest tote mixer on the market with no pinch points. This mixer has many different options available to meet any process conditions. Tote Mixer Flyer

WVM Mixers

The WVM mixers consist of a simple wall additive injection point, a pre-distribution tab immediately downstream of the injection point and banks of trapezoidal shaped mixing elements. The number of banks of mixing elements varies depending on the mixture quality required for the process. The dimensions, angle of attack and spacing of the trapezoidal mixing elements varies between the WVM models A, B and C. The pre-distribution tab and the injection point design are the same for all WVM models.

XPress Mixers

USA - Europe
72-hour delivery
30-day "No Risk Trial" Total support for your mixing need 50+ years experience in mixer technology
Industry standard IEC, off-theshelf motors from 0.18 to 1.5kw Features and Benefits Motors: Direct drive.