Depot Containers Type CR

Use * room for filling or storage indoors or outdoors, alternatively as a building site container Design * natural or technical venting * wing or sliding doors * mobile * with or without insulation * accessible for pedestrians or vehicles * retention basins with various inlays, PE etc. * sturdy steel construction, material thickness for retention basin 5 mm * retention capacity compliant with the relevant legal requirements; up to 100% in water protection areas Finish * spray painted: blue RAL 5012 white RAL 9002 * customized painted fi nish on request Accessories * heating / air conditioning * drum stand for horizontal storage of drums * shelving systems / pallet shelving * lighting (explosion-proof systems available) * fire extinguishing systems * explosion-proof aeration for suction directly from the retention basin * extraction systems for work place * hot-dip galvanized, stainless steel or synthetic grids * emergency shower / emergency cabinet * adjustable feet * gas detector * earthing / potential equalisation

Drum manipulator

Transporting, thorough and controlled emptying and turning of steel and plastic drums (60-220 l) and waste bins (120/240 l) sturdy frame with fork sleeves Prisma with tenter-belt and special self-braking gear box with crank handle or loop chain can be secured to prevent slipping load capacity: 300 kg range of rotation: 360° suitable for fork-lift truck and crane

Swarf Container Type SGU

Volume 0.3 -1.5 m3 Specially designed to separate liquids from solids and collect them * perforated intermediate floor 100 mm above the floor, perforation Ø 3 mm, separation 6 mm * 1" drain-cock for drainage of liquids * can be emptied at any height by cable operated from the driver's seat * body wall with reinforced edging * sturdy frame with fork sleeves * can be secured to prevent slipping and unintentional emptying * welding, oil- and watertight Finish * spray painted: orange RAL 2000 red RAL 3000 blue RAL 5012 green RAL 6011 grey RAL 7005 * hot-dip galvanized (EN ISO 1461) Accessories * 2 swivel + 2 fixed polyamide castors Ø 180 mm, one swivel castor with brake - construction height 220 mm and handle * supporting feet for use with a pallet truck Individual construction on request * e.g. stainless steel

Tipping Equipment

Wheelie Bin Tipper Type MK For emptying and cleaning 80/120 or 240 litre wheelie bins sturdy steel construction fork sleeves for pick-up using forks suitable for fork-lift trucks, front loaders and other vehicles with forks can be secured to prevent slipping and unintentional emptying self-locking hooks hold the wheelie bin securely in place during emptying load capacity: 250 kg

Transport Pallet Type TP

Use * for the efficient and safe transport of plastic drums etc. Design * base frame of the SAP 800 * 3-sided framework with a double door and a latch built on to the frame * can be stacked on hazardous materials containers with a frame measuring 1200 x 1000 mm according to "DIN 30741" Finish * hot-dip galvanized (EN ISO 1461)

Waste skip

The economical way to collect waste or to commission solids using a minimum of space sturdy construction, trap door with reinforcement trap door closes automatically when skip touches the ground suitable for fork-lift and crane guiding plates for trap door cable-operated door release can be secured to prevent slipping and unintentional trap door operation can be stacked (3 units)