|
|
|
 |
Henrich has been ranking high among competent suppliers of equipment to the wire and cable making industry on an international scale |
| Employees : |
40+ |
| Year established : |
1960 |
Business : |
Manufacturer |
Rod Breakdown Drawing Machines •
Multi- Wire Drawing Machines •
Intermediate and Fine Wire Drawing Machines •
Superfine and Ultra Fine Drawing Machines •
Tandem Drawing - Annealing - Preheating Unit •
Annealer •
Take-Ups •
HENRICH GmbH, who began manufacturing machines and systems for the wire and cable industry in 1960. From the very beginning, HENRICH succeeded in establishing themself as a reliable supplier of wire drawing equipment to the domestic and international wire and cable producers. Over the years, the company successfully transformed a multitude of innovative concepts and acquired know how into a line of products with distinctly sophisticated and mature engineering features. The company's major objectives are directed towards promoting innovative ideas and working on future-oriented design concepts. Our steadfast commitment is dedicated to maintain a very high level of product quality and reliabilty of operation of all HENRICH built equipment which is supported by a dedicated customer service.
 | Annealer Modell "ESH - 600"
Modell "ESHE - 600"
finish wire dia: 1,00 - 5,00 mm Cu, Al and AL-Alloy
speed: 40 m/s
contact sheave dia: 600 mm
No. of wires: 1 or 2
performance: output max. 6.000 kg/h
|  | Bundle Packer Modell "B - 1000"
Modell "B - 1250"
finish wire dia: Multiwire Drawing Line: soft 0,30 - 1,80 mm
RDB Drawing Line: soft 1,30 - 4,50 mm
DB Drawing Line: hard 1,30 - 3,50 mm
speed: 32 m/s
real flange dia: 1.000 mm and 1.250 mm acc. to DIN 46397
No. of wires: 1 wire
real filling weight: 2.000 kg and 4.000 kg
|  | Intermediate and Fine Wire Drawing Machines Modell "G"
with integrated Annealer Model "EG"
inlet dia: 3,50 mm Cu
finish wire dia: 0,30 - 1,80 mm
speed: 40 m/s
No. of drafts: 17
No. of wires: 2 - 7
die elongation: 26%
|  | Multi-Wire Drawing Machines Modell "MIk"
inlet dia: max. 2,60 mm
finish wire dia: 0,25 - 1,30 mm
speed: 32 m/s
No. of drafts: 17 - 25
No. of wires: 4 - 16
caption dia: 135 mm and 100 mm
die elongation: 26% and 21% per draft
|  | Rod Breakdown Drawing Machines Modell "SE - SLQ"
inlet dia: 8,00 mm Cu
9,50 mm Al.Alloy
finish wire dia: 1,00 - 4,52 mm Cu
1,50 - 5,00 mm Al-Alloy
speed: 36 m/s
No. of drafts: 9, 11, 13, 15
No. of wires: one or two
die elongation: var. from 26% > 50% per draft
performance: output max. 5.000 kg/h Cu
output max. 2.500 kg/h Al
output max. 1.500 kg/h Alloy
|  | Superfine and Ultra Fine Drawing Machines Modell "Z"
with integrated Annealer and Take-up
inlet dia: 0,06 mm Cu, AL, Pt, Au, Ag
finish wire dia: 0,012 - 0,030 mm
speed: max. 15 m/s
No. of drafts: 16
No. of wires: one
die elongation: 10% or 8% or 6% per draft
spool flange dia: 50 - 125 mm
according to DIN 46397
|  | Take-Ups Single Spooler
Modell "GS - 0451"
finish wire dia: Multiwire Drawing Line: 0,05 - 0,32 mm
Single Wire Drawing Line: 0,01 - 1,00 mm
speed: 40 m/s
real flange dia: max. 450 mm acc. to DIN 46397
No. of wires: 1 to 16 wires
real filling weight: 150 kg
|  | Tandem Drawing - Annealing - Preheating Unit Modell "UWG - 17-01-26"
+ EIT - 01-GL-200-3(P)
inlet dia: 2,30 - 3,26 mm
finish wire dia: 0,32 - 0,91 mm
speed: 40 m/s
No. of drafts: 17
No. of wires: one
die elongation: 26%
equiped with calibration die
separatly driven pull-out capstan
constant wire diameter across the entire wire length with tight tolerances
exact roundness of wire
good surface quality
constant break elongcation with tight tolerances
optimum and regular recrystallization of the wire texture
inductive preheater, conductive annealer
extremly low wire strain and vibration risk
compact design, ready for connection | |
|
|
<
