JE Woodarchiv Viewer

With the JE Woodarchiv Viewer you can search the archive for certain criteria. All management, measuring data and images are available, therefore a complete documentation of each log is possible. The JE-Woodarchiv consists of three software modules: Data and Image scheduler Shooting software with monitoring function Adjustable trigger point on customers requirement Customers logs can be integrated with the interfaces Picture Trigger External trigger Triggering on customers requirement Woodarchiv Viewer Fast classification of distributors Search filters Analysis of individual logs within a load PDF export for distibutors

JORO-3D Realtime Wood Scanning System

By means of a continuous light band, the object of measurement is scanned all around. An unbroken recording of the measurement points allows an evaluation of the object of measurement without calculation, without interpolation, i.e. your wood is evaluated and shaped according to the actual measured values – no interruption in the conveyor belt, – no mechanic reconstruction. Installing and measuring, scanning at the speed of light, evaluating with high performance processor and evaluating the optimum result. The position of the object of measurement is finally no longer important. The continuous recording of the complete surface allows an optimum measurement of ovality, taper, curvature, sweep, independent of the position of the log and the measuring position. A perfect recognition of cut sections is a matter of course. Highest accuracy The new measurement technique allows a certain quality recognition or evaluation resp. Environmental influences, such as temperature fluctuations, pressure differentials and relative humidity are constantly surveyed and compensated. The assembly is very simple and, thanks to the enclosed holding fixture and cables, can also be done by untrained staff. The same applies to the adjustment which is very simple due to an integrated laser point and a test program. Due to scalable measuring ranges, completely new appliances are possible with the JORO-3D

JORO-sonar Realtime Wood Scanning System

JORO-sonar is a 2D scanner including an optoelectronic and an ultrasonic unit. The advantage of the system is the possibility of scanning two diameters without interruption of the conveyor. The infrared scanner works after the light shadow principle and measures the vertical diameter D1. The ultrasonic unit measures the distance and calculates the horizontal diameter D2. Principle The scanner works with a digital signal processor (DSP). Through the fast infraredscanner we have an exact recognition of the target and a direct coordination of logdiameters to the loglength. A serial industrial interface (RS 485) sends the scanned and filtered datas to the host computer. Highest accuracy Environmental influence, like temperature, air-pressure, humidity will be compensated with an additional reference sensor. The resulting temperature range therefore is -25 degrees centigrade to +50 degrees centigrade (without icing of the ultrasonic-sensors) In connection with an encoder the scanner is type-approval certificate under German law.

Woodarchiv The digital pictures archive for the log yard

Requirements of the round timber industry continue to increase. In order to document assessment of quality, you can document each log with our digital pictures archive fully and automatically. With the Woodarchiv Viewer all digital pictures can be evaluated with a multitude of analysis functions. Up to 20 digital cameras take high resolution pictures of each log and together with the measurement and load data these pictures are stored in a SQL database.