metal sheet punching machine

PK 30 DISPLAYED PUNCHING MACHINE Description Vertical punching machine with single-punch, oil-dynamic operation, positioning stroke with supports in order to avoid the insertion of a thin sheet between the machine surface and the stroke. The mechanical positioning devices allow to set out a sequence of holes with variable sizes on the longitudinal rod; furthermore it is possible to choose the working cycle: continuous with programmable pause time or single. Adjustable punch stroke and possibility to punch pre-bent sheets. Longitudinal positioning rod, with orthogonal movement and guides on bearings. Advantages It allows to select the cycle working program: continuous with programmable pause time or single cycle. The mechanical positioning devices permit to set out a sequence of holes with variable sizes on the longitudinal rod

N.C. PUNCHING MACHINE “TWIN” WITH BARS STORAGE

N.C. PUNCHING MACHINE “TWIN” WITH BARS STORAGE Description The TWIN punching machine can be equipped with a bundle storage to feed the bars automatically by means of a manipulator positioned between the storage-magazine and the TWIN machine, which will load and unload the bars automatically - thus completely automatising the bar-punching cycle. The magazine may be supplied with bars of up to a length of 7 m. This procedure eliminates the manual loading and unloading of the bars by the operator - a great labour-saving. Advantages This machine enables a production speed higher than other punching machines on the market. Fast and accurate, it can punch one or more tubes at the same time. The version with bars loading/unloading storage-magazine allows to work without operator and to punch semi-oval or rectangular pipes without blisters thanks to an exclusive system. It can carry out a working cycle in approx. 50” on a bar 2 meters long and steps up production.

notching machines

TF 204 - TF 206 Description Hanging mobile head with cylinder positioned at the centre of the cutting area. This gives the machine a high rigidity and avoids ill-aligned loads on the multiple self-lubricated guides. Patented automatic inter-spacing with retractile lower blades, allowing for the cutting of R40 kg/sq. mm metal sheets of 1 to 4 mm, without need of programming adjustment. Reverse blade cut, possibility of restarting cutting process. Max. shearing: 205x6 mm R.40 kg/sq mm. 60 precision cuts per minute at 90°. production-burr collection drawer. As regards to the TF204 the cut operation starts from the top of the blades in order to avoid the displacement of the sheet to be sheared. The TF206 is equipped with 2 spring hold-down clamps to avoid the displacement of the sheet to be sheared¬. Advantages Very large machine surface with ergonomic shape. Easy to use with electrical control pedal. Long life of the blades.

universal horizontal presses

P170 Description Press with manual stroke adjustment and slide-positioning display. Power: 17 tons. It can bend flat bars in Fe37 of 120x12 mm, a pipe of max Fe1” ¼ , thickness: 3 mm. It shears an iron plate of max 80x 8 mm. Advantages Easy to use, low-priced, versatile and accurate.