Bevelling

Corner cutting becomes child's play Many companies cut their products first with a perpendicular cut. Afterwards they will mill or cut their product manually. This is very labour-intensive and the production costs are very high.

compact-oxyfuel-cutting

compact-oxyfuel-cutting

Oxyfuel

Simple and low-cost oxyfuel cutting The oxyfuel cutting process is a burning process. This means that the material in the cut is oxidized with pure oxygen, with the aid of propane or acetylene. At the cutting end the temperature will get up to 1500 °C. One of the few metals that can be cut with the oxyfuel process is unalloyed and alloyed steel.

Plasma

Fast cutting with plasma Recently the plasma cutting process has come forward as an economic process in the cutting technology. Fast machines are necessary for this high-speed process (up to 8000 mm/minute cutting speed). Cutting with plasma stands for great precision. The process is only suitable to cut electric conducting materials. It has a result of 0,5 tot 0,40 mm. Plasma cutting is mainly used for cutting non-ferrous materials (whit a maximum thickness of 180 mm), but also thin plates of steel can be cut with it.

Special Combi plasma-water cutting

Special Combi plasma-water cutting

Water jet

Accurate cutting with water Accurate cutting with water For accurate cutting of all kinds of materials and of various thicknesses you can use the water cutting process. The accuracy of the water jet cutting process is 0,01 mm. You can get high quality contours thanks to the very thin water jet. With a pressure of 4000 bar the water cuts easily through almost any material. You can cut soft materials, like paper, leather and plastic, as well as hard materials. For cutting hard materials abrasive needs to be added to the water jet. The abrasive is a kind of cutting sand with a very fine structure. If you add the abrasive it is possible to cut through steel with a thickness up to 150 mm.